Commit 773b1d3d authored by Stephen Warren's avatar Stephen Warren Committed by Mark Brown

ASoC: Tegra: Support more boards

* Ventana is identical to Harmony.
* Seaboard, Kaen, and Aebl are all pretty similar, mainly with slightly
  different sets of GPIOs, and slightly different WM8903 pin connectivity.
Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
Acked-by: default avatarLiam Girdwood <lrg@ti.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 3eb25f99
......@@ -16,12 +16,13 @@ config SND_SOC_TEGRA_I2S
config SND_SOC_TEGRA_WM8903
tristate "SoC Audio support for Tegra boards using a WM8903 codec"
depends on SND_SOC_TEGRA && MACH_HARMONY && I2C
depends on SND_SOC_TEGRA && I2C
depends on MACH_HARMONY || MACH_VENTANA || MACH_SEABOARD || MACH_KAEN || MACH_AEBL
default m
select SND_SOC_TEGRA_I2S
select SND_SOC_WM8903
help
Say Y or M here if you want to add support for SoC audio on Tegra
boards using the WM8093 codec. Currently, the only supported board
is Harmony.
boards using the WM8093 codec. Currently, the supported boards are
Harmony, Ventana, Seaboard, Kaen, and Aebl.
......@@ -53,8 +53,9 @@
#define DRV_NAME "tegra-snd-wm8903"
#define GPIO_SPKR_EN BIT(0)
#define GPIO_INT_MIC_EN BIT(1)
#define GPIO_EXT_MIC_EN BIT(2)
#define GPIO_HP_MUTE BIT(1)
#define GPIO_INT_MIC_EN BIT(2)
#define GPIO_EXT_MIC_EN BIT(3)
struct tegra_wm8903 {
struct tegra_asoc_utils_data util_data;
......@@ -163,15 +164,35 @@ static int tegra_wm8903_event_int_spk(struct snd_soc_dapm_widget *w,
struct tegra_wm8903 *machine = snd_soc_card_get_drvdata(card);
struct tegra_wm8903_platform_data *pdata = machine->pdata;
if (!(machine->gpio_requested & GPIO_SPKR_EN))
return 0;
gpio_set_value_cansleep(pdata->gpio_spkr_en,
SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
static int tegra_wm8903_event_hp(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
struct snd_soc_codec *codec = w->codec;
struct snd_soc_card *card = codec->card;
struct tegra_wm8903 *machine = snd_soc_card_get_drvdata(card);
struct tegra_wm8903_platform_data *pdata = machine->pdata;
if (!(machine->gpio_requested & GPIO_HP_MUTE))
return 0;
gpio_set_value_cansleep(pdata->gpio_hp_mute,
!SND_SOC_DAPM_EVENT_ON(event));
return 0;
}
static const struct snd_soc_dapm_widget tegra_wm8903_dapm_widgets[] = {
SND_SOC_DAPM_SPK("Int Spk", tegra_wm8903_event_int_spk),
SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_HP("Headphone Jack", tegra_wm8903_event_hp),
SND_SOC_DAPM_MIC("Mic Jack", NULL),
};
......@@ -186,6 +207,37 @@ static const struct snd_soc_dapm_route harmony_audio_map[] = {
{"IN1L", NULL, "Mic Bias"},
};
static const struct snd_soc_dapm_route seaboard_audio_map[] = {
{"Headphone Jack", NULL, "HPOUTR"},
{"Headphone Jack", NULL, "HPOUTL"},
{"Int Spk", NULL, "ROP"},
{"Int Spk", NULL, "RON"},
{"Int Spk", NULL, "LOP"},
{"Int Spk", NULL, "LON"},
{"Mic Bias", NULL, "Mic Jack"},
{"IN1R", NULL, "Mic Bias"},
};
static const struct snd_soc_dapm_route kaen_audio_map[] = {
{"Headphone Jack", NULL, "HPOUTR"},
{"Headphone Jack", NULL, "HPOUTL"},
{"Int Spk", NULL, "ROP"},
{"Int Spk", NULL, "RON"},
{"Int Spk", NULL, "LOP"},
{"Int Spk", NULL, "LON"},
{"Mic Bias", NULL, "Mic Jack"},
{"IN2R", NULL, "Mic Bias"},
};
static const struct snd_soc_dapm_route aebl_audio_map[] = {
{"Headphone Jack", NULL, "HPOUTR"},
{"Headphone Jack", NULL, "HPOUTL"},
{"Int Spk", NULL, "LINEOUTR"},
{"Int Spk", NULL, "LINEOUTL"},
{"Mic Bias", NULL, "Mic Jack"},
{"IN1R", NULL, "Mic Bias"},
};
static const struct snd_kcontrol_new tegra_wm8903_controls[] = {
SOC_DAPM_PIN_SWITCH("Int Spk"),
};
......@@ -199,6 +251,7 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
struct tegra_wm8903_platform_data *pdata = machine->pdata;
int ret;
if (gpio_is_valid(pdata->gpio_spkr_en)) {
ret = gpio_request(pdata->gpio_spkr_en, "spkr_en");
if (ret) {
dev_err(card->dev, "cannot get spkr_en gpio\n");
......@@ -207,7 +260,20 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
machine->gpio_requested |= GPIO_SPKR_EN;
gpio_direction_output(pdata->gpio_spkr_en, 0);
}
if (gpio_is_valid(pdata->gpio_hp_mute)) {
ret = gpio_request(pdata->gpio_hp_mute, "hp_mute");
if (ret) {
dev_err(card->dev, "cannot get hp_mute gpio\n");
return ret;
}
machine->gpio_requested |= GPIO_HP_MUTE;
gpio_direction_output(pdata->gpio_hp_mute, 0);
}
if (gpio_is_valid(pdata->gpio_int_mic_en)) {
ret = gpio_request(pdata->gpio_int_mic_en, "int_mic_en");
if (ret) {
dev_err(card->dev, "cannot get int_mic_en gpio\n");
......@@ -217,7 +283,9 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
/* Disable int mic; enable signal is active-high */
gpio_direction_output(pdata->gpio_int_mic_en, 0);
}
if (gpio_is_valid(pdata->gpio_ext_mic_en)) {
ret = gpio_request(pdata->gpio_ext_mic_en, "ext_mic_en");
if (ret) {
dev_err(card->dev, "cannot get ext_mic_en gpio\n");
......@@ -227,6 +295,7 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
/* Enable ext mic; enable signal is active-low */
gpio_direction_output(pdata->gpio_ext_mic_en, 0);
}
ret = snd_soc_add_controls(codec, tegra_wm8903_controls,
ARRAY_SIZE(tegra_wm8903_controls));
......@@ -236,9 +305,21 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
snd_soc_dapm_new_controls(dapm, tegra_wm8903_dapm_widgets,
ARRAY_SIZE(tegra_wm8903_dapm_widgets));
if (machine_is_harmony() || machine_is_ventana()) {
snd_soc_dapm_add_routes(dapm, harmony_audio_map,
ARRAY_SIZE(harmony_audio_map));
} else if (machine_is_seaboard()) {
snd_soc_dapm_add_routes(dapm, seaboard_audio_map,
ARRAY_SIZE(seaboard_audio_map));
} else if (machine_is_kaen()) {
snd_soc_dapm_add_routes(dapm, kaen_audio_map,
ARRAY_SIZE(kaen_audio_map));
} else {
snd_soc_dapm_add_routes(dapm, aebl_audio_map,
ARRAY_SIZE(aebl_audio_map));
}
if (gpio_is_valid(pdata->gpio_hp_det)) {
tegra_wm8903_hp_jack_gpio.gpio = pdata->gpio_hp_det;
snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
&tegra_wm8903_hp_jack);
......@@ -248,6 +329,7 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
snd_soc_jack_add_gpios(&tegra_wm8903_hp_jack,
1,
&tegra_wm8903_hp_jack_gpio);
}
snd_soc_jack_new(codec, "Mic Jack", SND_JACK_MICROPHONE,
&tegra_wm8903_mic_jack);
......@@ -259,10 +341,26 @@ static int tegra_wm8903_init(struct snd_soc_pcm_runtime *rtd)
snd_soc_dapm_force_enable_pin(dapm, "Mic Bias");
/* FIXME: Calculate automatically based on DAPM routes? */
if (!machine_is_harmony() && !machine_is_ventana())
snd_soc_dapm_nc_pin(dapm, "IN1L");
if (!machine_is_seaboard() && !machine_is_aebl())
snd_soc_dapm_nc_pin(dapm, "IN1R");
snd_soc_dapm_nc_pin(dapm, "IN2L");
if (!machine_is_kaen())
snd_soc_dapm_nc_pin(dapm, "IN2R");
snd_soc_dapm_nc_pin(dapm, "IN3L");
snd_soc_dapm_nc_pin(dapm, "IN3R");
snd_soc_dapm_nc_pin(dapm, "LINEOUTL");
if (machine_is_aebl()) {
snd_soc_dapm_nc_pin(dapm, "LON");
snd_soc_dapm_nc_pin(dapm, "RON");
snd_soc_dapm_nc_pin(dapm, "ROP");
snd_soc_dapm_nc_pin(dapm, "LOP");
} else {
snd_soc_dapm_nc_pin(dapm, "LINEOUTR");
snd_soc_dapm_nc_pin(dapm, "LINEOUTL");
}
snd_soc_dapm_sync(dapm);
......@@ -293,14 +391,16 @@ static __devinit int tegra_wm8903_driver_probe(struct platform_device *pdev)
struct tegra_wm8903_platform_data *pdata;
int ret;
if (!machine_is_harmony()) {
dev_err(&pdev->dev, "Not running on Tegra Harmony!\n");
if (!machine_is_harmony() && !machine_is_ventana() &&
!machine_is_seaboard() && !machine_is_kaen() &&
!machine_is_aebl()) {
dev_err(&pdev->dev, "Not running on a supported board!\n");
return -ENODEV;
}
pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "no platform data supplied\n");
dev_err(&pdev->dev, "No platform data supplied\n");
return -EINVAL;
}
......@@ -357,6 +457,8 @@ static int __devexit tegra_wm8903_driver_remove(struct platform_device *pdev)
gpio_free(pdata->gpio_ext_mic_en);
if (machine->gpio_requested & GPIO_INT_MIC_EN)
gpio_free(pdata->gpio_int_mic_en);
if (machine->gpio_requested & GPIO_HP_MUTE)
gpio_free(pdata->gpio_hp_mute);
if (machine->gpio_requested & GPIO_SPKR_EN)
gpio_free(pdata->gpio_spkr_en);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment