Commit 7811a3ad authored by Andrej Krutak's avatar Andrej Krutak Committed by Takashi Iwai

ALSA: line6: Allow processing of raw incoming messages

Not all PODs use MIDI via USB data interface, thus allow avoiding
that code and instead using direct processing.
Signed-off-by: default avatarAndrej Krutak <dev@andree.sk>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 174e1fc0
......@@ -290,6 +290,7 @@ static void line6_data_received(struct urb *urb)
if (urb->status == -ESHUTDOWN)
return;
if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
done =
line6_midibuf_write(mb, urb->transfer_buffer, urb->actual_length);
......@@ -313,6 +314,10 @@ static void line6_data_received(struct urb *urb)
if (line6->process_message)
line6->process_message(line6);
}
} else {
if (line6->process_message)
line6->process_message(line6);
}
line6_start_listen(line6);
}
......@@ -469,7 +474,9 @@ static void line6_destruct(struct snd_card *card)
struct usb_device *usbdev = line6->usbdev;
/* free buffer memory first: */
if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI)
kfree(line6->buffer_message);
kfree(line6->buffer_listen);
/* then free URBs: */
......@@ -515,7 +522,7 @@ static void line6_get_interval(struct usb_line6 *line6)
}
}
static int line6_init_cap_control_midi(struct usb_line6 *line6)
static int line6_init_cap_control(struct usb_line6 *line6)
{
int ret;
......@@ -524,14 +531,16 @@ static int line6_init_cap_control_midi(struct usb_line6 *line6)
if (!line6->buffer_listen)
return -ENOMEM;
line6->buffer_message = kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL);
if (!line6->buffer_message)
return -ENOMEM;
line6->urb_listen = usb_alloc_urb(0, GFP_KERNEL);
if (!line6->urb_listen)
return -ENOMEM;
if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
line6->buffer_message = kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL);
if (!line6->buffer_message)
return -ENOMEM;
}
ret = line6_start_listen(line6);
if (ret < 0) {
dev_err(line6->ifcdev, "cannot start listening: %d\n", ret);
......@@ -605,8 +614,8 @@ int line6_probe(struct usb_interface *interface,
line6_get_interval(line6);
if (properties->capabilities & LINE6_CAP_CONTROL_MIDI) {
ret = line6_init_cap_control_midi(line6);
if (properties->capabilities & LINE6_CAP_CONTROL) {
ret = line6_init_cap_control(line6);
if (ret < 0)
goto error;
}
......@@ -676,7 +685,7 @@ int line6_suspend(struct usb_interface *interface, pm_message_t message)
snd_power_change_state(line6->card, SNDRV_CTL_POWER_D3hot);
if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI)
if (line6->properties->capabilities & LINE6_CAP_CONTROL)
line6_stop_listen(line6);
if (line6pcm != NULL) {
......@@ -695,7 +704,7 @@ int line6_resume(struct usb_interface *interface)
{
struct usb_line6 *line6 = usb_get_intfdata(interface);
if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI)
if (line6->properties->capabilities & LINE6_CAP_CONTROL)
line6_start_listen(line6);
snd_power_change_state(line6->card, SNDRV_CTL_POWER_D0);
......
......@@ -147,15 +147,18 @@ struct usb_line6 {
/* URB for listening to POD data endpoint */
struct urb *urb_listen;
/* Buffer for listening to POD data endpoint */
/* Buffer for incoming data from POD data endpoint */
unsigned char *buffer_listen;
/* Buffer for message to be processed */
/* Buffer for message to be processed, generated from MIDI layer */
unsigned char *buffer_message;
/* Length of message to be processed */
/* Length of message to be processed, generated from MIDI layer */
int message_length;
/* If MIDI is supported, buffer_message contains the pre-processed data;
* otherwise the data is only in urb_listen (buffer_incoming).
*/
void (*process_message)(struct usb_line6 *);
void (*disconnect)(struct usb_line6 *line6);
};
......
......@@ -258,7 +258,7 @@ int line6_init_midi(struct usb_line6 *line6)
struct snd_rawmidi *rmidi;
struct snd_line6_midi *line6midi;
if (!(line6->properties->capabilities & LINE6_CAP_CONTROL)) {
if (!(line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI)) {
/* skip MIDI initialization and report success */
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment