Merge alpha Kconfig

arch/alpha/Kconfig

@@ -188,7 +188,7 @@ config ALPHA_MIATA
 	help
 	  The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
 	  or 600au).  There is an Installation HOWTO for this hardware at
-	  <http://members.brabant.chello.nl/~s.vandereijk/miata.html>.
+	  <http://eijk.homelinux.org/~stefan/miata.html>.
 
 config ALPHA_MIKASA
 	bool "Mikasa"
@@ -486,19 +486,8 @@ config SMP
 	  singleprocessor machines. On a singleprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  Note that if you say Y here and choose architecture "586" or
-	  "Pentium" under "Processor family", the kernel will not work on 486
-	  architectures. Similarly, multiprocessor kernels for the "PPro"
-	  architecture may not work on all Pentium based boards.
-
-	  People using multiprocessor machines who say Y here should also say
-	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
-	  Management" code will be disabled if you say Y here.
-
-	  See also the <file:Documentation/smp.txt>,
-	  <file:Documentation/i386/IO-APIC.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
+	  See also the <file:Documentation/smp.tex>, and the SMP-HOWTO
+	  available at <http://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 

arch/alpha/defconfig

@@ -2,8 +2,8 @@
 # Automatically generated make config: don't edit
 #
 CONFIG_ALPHA=y
+CONFIG_64BIT=y
 CONFIG_MMU=y
-CONFIG_SWAP=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_ISA_DMA=y
 
@@ -11,14 +11,28 @@ CONFIG_GENERIC_ISA_DMA=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_STANDALONE=y
+CONFIG_BROKEN_ON_SMP=y
 
 #
 # General setup
 #
-CONFIG_NET=y
+CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_HOTPLUG is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 
 #
 # Loadable module support
@@ -26,6 +40,8 @@ CONFIG_SYSCTL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
 CONFIG_KMOD=y
 
 #
@@ -45,6 +61,8 @@ CONFIG_ALPHA_GENERIC=y
 # CONFIG_ALPHA_EIGER is not set
 # CONFIG_ALPHA_JENSEN is not set
 # CONFIG_ALPHA_LX164 is not set
+# CONFIG_ALPHA_LYNX is not set
+# CONFIG_ALPHA_MARVEL is not set
 # CONFIG_ALPHA_MIATA is not set
 # CONFIG_ALPHA_MIKASA is not set
 # CONFIG_ALPHA_NAUTILUS is not set
@@ -62,26 +80,35 @@ CONFIG_ALPHA_GENERIC=y
 # CONFIG_ALPHA_TITAN is not set
 # CONFIG_ALPHA_WILDFIRE is not set
 CONFIG_ISA=y
-CONFIG_EISA=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_ALPHA_CORE_AGP=y
 CONFIG_ALPHA_BROKEN_IRQ_MASK=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EISA=y
 # CONFIG_SMP is not set
 # CONFIG_DISCONTIGMEM is not set
 CONFIG_VERBOSE_MCHECK=y
+CONFIG_VERBOSE_MCHECK_ON=1
+CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
-# CONFIG_HOTPLUG is not set
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
+CONFIG_EISA_PCI_EISA=y
+CONFIG_EISA_VIRTUAL_ROOT=y
+CONFIG_EISA_NAMES=y
 CONFIG_SRM_ENV=m
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_EM86 is not set
+# CONFIG_BINFMT_MISC is not set
 
 #
-# Parallel port support
+# Device Drivers
 #
-# CONFIG_PARPORT is not set
+
+#
+# Generic Driver Options
+#
+# CONFIG_DEBUG_DRIVER is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -89,10 +116,14 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MTD is not set
 
 #
-# Plug and Play configuration
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
 #
 CONFIG_PNP=y
-# CONFIG_PNP_NAMES is not set
 # CONFIG_PNP_DEBUG is not set
 
 #
@@ -111,63 +142,60 @@ CONFIG_BLK_DEV_FD=y
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_CARMEL is not set
 # CONFIG_BLK_DEV_RAM is not set
 
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
 #
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
-# CONFIG_BLK_DEV_HD is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_IDEDISK_STROKE is not set
 CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IDE_TASKFILE_IO is not set
 
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_BLK_DEV_ISAPNP is not set
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDE_TCQ is not set
 # CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_BLK_DEV_ADMA=y
 # CONFIG_BLK_DEV_AEC62XX is not set
 CONFIG_BLK_DEV_ALI15X3=y
 # CONFIG_WDC_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
 CONFIG_BLK_DEV_CY82C693=y
+# CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
 # CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
 # CONFIG_BLK_DEV_SVWKS is not set
@@ -176,13 +204,17 @@ CONFIG_BLK_DEV_CY82C693=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_IDE_CHIPSETS is not set
-CONFIG_IDEDMA_AUTO=y
+CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
-# SCSI support
+# SCSI device support
 #
 CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -202,86 +234,105 @@ CONFIG_BLK_DEV_SR_VENDOR=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+
 #
 # SCSI low-level drivers
 #
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_7000FASST is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AHA1542 is not set
 # CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AACRAID is not set
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
 CONFIG_AIC7XXX_RESET_DELAY_MS=5000
+# CONFIG_AIC7XXX_PROBE_EISA_VL is not set
 # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
 # CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_DMA is not set
 # CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NCR53C7xx is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-CONFIG_SCSI_NCR53C8XX=y
-CONFIG_SCSI_SYM53C8XX=y
-CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
-CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
-CONFIG_SCSI_NCR53C8XX_SYNC=20
-# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
-# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA6322 is not set
 # CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
 #
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
 
 #
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+# IEEE 1394 (FireWire) support
 #
 # CONFIG_IEEE1394 is not set
 
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
 #
 # Networking options
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_NETLINK_DEV=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_FILTER is not set
 CONFIG_UNIX=y
 CONFIG_NET_KEY=m
 CONFIG_INET=y
@@ -296,7 +347,17 @@ CONFIG_INET_ECN=y
 # CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
-CONFIG_XFRM_USER=m
+# CONFIG_INET_IPCOMP is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
 
 #
 # IP: Netfilter Configuration
@@ -304,14 +365,18 @@ CONFIG_XFRM_USER=m
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 # CONFIG_IP_NF_MATCH_LIMIT is not set
+# CONFIG_IP_NF_MATCH_IPRANGE is not set
 # CONFIG_IP_NF_MATCH_MAC is not set
 # CONFIG_IP_NF_MATCH_PKTTYPE is not set
 # CONFIG_IP_NF_MATCH_MARK is not set
 # CONFIG_IP_NF_MATCH_MULTIPORT is not set
 # CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
 # CONFIG_IP_NF_MATCH_ECN is not set
 # CONFIG_IP_NF_MATCH_DSCP is not set
 # CONFIG_IP_NF_MATCH_AH_ESP is not set
@@ -321,15 +386,15 @@ CONFIG_IP_NF_IPTABLES=m
 # CONFIG_IP_NF_MATCH_HELPER is not set
 # CONFIG_IP_NF_MATCH_STATE is not set
 # CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_UNCLEAN is not set
 # CONFIG_IP_NF_MATCH_OWNER is not set
 CONFIG_IP_NF_FILTER=m
 # CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_MIRROR is not set
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 # CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
 # CONFIG_IP_NF_NAT_LOCAL is not set
 # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
 CONFIG_IP_NF_NAT_IRC=m
@@ -340,7 +405,8 @@ CONFIG_IP_NF_NAT_FTP=m
 # CONFIG_IP_NF_TARGET_TCPMSS is not set
 # CONFIG_IP_NF_ARPTABLES is not set
 CONFIG_IP_NF_COMPAT_IPCHAINS=y
-# CONFIG_IPV6 is not set
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -349,9 +415,9 @@ CONFIG_IPV6_SCTP__=y
 # CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
 # CONFIG_NET_DIVERT is not set
@@ -369,10 +435,6 @@ CONFIG_VLAN_8021Q=m
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 
 #
@@ -390,6 +452,7 @@ CONFIG_DUMMY=m
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 CONFIG_NET_VENDOR_3COM=y
@@ -400,6 +463,7 @@ CONFIG_NET_VENDOR_3COM=y
 # CONFIG_EL3 is not set
 # CONFIG_3C515 is not set
 CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
 # CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
@@ -412,6 +476,7 @@ CONFIG_DE2104X=m
 CONFIG_TULIP=y
 # CONFIG_TULIP_MWI is not set
 CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
 # CONFIG_DE4X5 is not set
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
@@ -421,10 +486,12 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_AC3200 is not set
 # CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
 # CONFIG_CS89x0 is not set
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
@@ -440,7 +507,6 @@ CONFIG_NET_PCI=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_NET_POCKET is not set
 
@@ -448,13 +514,20 @@ CONFIG_NET_PCI=y
 # Ethernet (1000 Mbit)
 #
 # CONFIG_ACENIC is not set
-CONFIG_DL2K=m
+# CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
-CONFIG_NS83820=m
+# CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 CONFIG_YELLOWFIN=y
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
@@ -470,8 +543,8 @@ CONFIG_YELLOWFIN=y
 #
 # CONFIG_TR is not set
 # CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
 # CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 
 #
 # Wan interfaces
@@ -483,35 +556,75 @@ CONFIG_YELLOWFIN=y
 #
 # CONFIG_HAMRADIO is not set
 
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BT is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
 #
 # ISDN subsystem
 #
-# CONFIG_ISDN_BOOL is not set
+# CONFIG_ISDN is not set
 
 #
-# Old CD-ROM drivers (not SCSI, not IDE)
+# Telephony Support
 #
-# CONFIG_CD_NO_IDESCSI is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
 #
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
 
 #
 # Userland interfaces
 #
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
 
 #
 # Input I/O drivers
 #
 # CONFIG_GAMEPORT is not set
 CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
 
 #
 # Input Device Drivers
 #
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Character devices
@@ -524,32 +637,30 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_CORE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_QIC02_TAPE is not set
 
 #
-# Mice
+# IPMI
 #
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
 
 #
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
 CONFIG_RTC=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -563,73 +674,135 @@ CONFIG_RTC=y
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Misc devices
+#
+
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
 
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
 #
 # File systems
 #
-# CONFIG_QUOTA is not set
-CONFIG_AUTOFS_FS=m
-# CONFIG_AUTOFS4_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=m
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_MINIX_FS is not set
 # CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
 # CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
 # CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_XFS_FS is not set
 
 #
 # Network File Systems
 #
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
-CONFIG_SUNRPC=m
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
-# CONFIG_CIFS is not set
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -638,11 +811,11 @@ CONFIG_EXPORTFS=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_OSF_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 
 #
 # Native Language Support
 #
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -683,29 +856,9 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Console drivers
-#
-CONFIG_VGA_CONSOLE=y
-
-#
-# Frame-buffer support
-#
-# CONFIG_FB is not set
-
+# Profiling support
 #
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_PROFILING is not set
 
 #
 # Kernel hacking
@@ -718,16 +871,34 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_RWLOCK is not set
 # CONFIG_DEBUG_SEMAPHORE is not set
+CONFIG_DEBUG_INFO=y
 
 #
 # Security options
 #
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Library routines

arch/alpha/kernel/alpha_ksyms.c

@@ -35,6 +35,9 @@
 #include <asm/cacheflush.h>
 #include <asm/vga.h>
 
+#define __KERNEL_SYSCALLS__
+#include <asm/unistd.h>
+
 extern struct hwrpb_struct *hwrpb;
 extern void dump_thread(struct pt_regs *, struct user *);
 extern spinlock_t rtc_lock;

arch/alpha/kernel/time.c

@@ -24,6 +24,8 @@
  * 2000-08-13	Jan-Benedict Glaw <jbglaw@lug-owl.de>
  * 	Fixed time_init to be aware of epoches != 1900. This prevents
  * 	booting up in 2048 for me;) Code is stolen from rtc.c.
+ * 2003-06-03	R. Scott Bailey <scott.bailey@eds.com>
+ *	Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM
  */
 #include <linux/config.h>
 #include <linux/errno.h>
@@ -306,7 +308,7 @@ void __init
 time_init(void)
 {
 	unsigned int year, mon, day, hour, min, sec, cc1, cc2, epoch;
-	unsigned long cycle_freq, one_percent;
+	unsigned long cycle_freq, tolerance;
 	long diff;
 
 	/* Calibrate CPU clock -- attempt #1.  */
@@ -324,13 +326,13 @@ time_init(void)
 
 	cycle_freq = hwrpb->cycle_freq;
 	if (est_cycle_freq) {
-		/* If the given value is within 1% of what we calculated, 
+		/* If the given value is within 250 PPM of what we calculated,
 		   accept it.  Otherwise, use what we found.  */
-		one_percent = cycle_freq / 100;
+		tolerance = cycle_freq / 4000;
 		diff = cycle_freq - est_cycle_freq;
 		if (diff < 0)
 			diff = -diff;
-		if ((unsigned long)diff > one_percent) {
+		if ((unsigned long)diff > tolerance) {
 			cycle_freq = est_cycle_freq;
 			printk("HWRPB cycle frequency bogus.  "
 			       "Estimated %lu Hz\n", cycle_freq);

arch/alpha/kernel/traps.c

@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/smp_lock.h>
 #include <linux/module.h>
+#include <linux/init.h>
 
 #include <asm/gentrap.h>
 #include <asm/uaccess.h>
@@ -25,35 +26,37 @@
 
 #include "proto.h"
 
-/* data/code implementing a work-around for some SRMs which
-   mishandle opDEC faults
-*/
-static int opDEC_testing = 0;
-static int opDEC_fix = 0;
-static int opDEC_checked = 0;
-static unsigned long opDEC_test_pc = 0;
+/* Work-around for some SRMs which mishandle opDEC faults.  */
 
-static void
+static int opDEC_fix;
+
+static void __init
 opDEC_check(void)
 {
-	unsigned long test_pc;
-
-	if (opDEC_checked) return;
-
-	lock_kernel();
-	opDEC_testing = 1;
-
-	__asm__ __volatile__(
-		"       br      %0,1f\n"
-		"1:     addq    %0,8,%0\n"
-		"       stq     %0,%1\n"
+	__asm__ __volatile__ (
+	/* Load the address of... */
+	"	br	$16, 1f\n"
+	/* A stub instruction fault handler.  Just add 4 to the
+	   pc and continue.  */
+	"	ldq	$16, 8($sp)\n"
+	"	addq	$16, 4, $16\n"
+	"	stq	$16, 8($sp)\n"
+	"	call_pal %[rti]\n"
+	/* Install the instruction fault handler.  */
+	"1:	lda	$17, 3\n"
+	"	call_pal %[wrent]\n"
+	/* With that in place, the fault from the round-to-minf fp
+	   insn will arrive either at the "lda 4" insn (bad) or one
+	   past that (good).  This places the correct fixup in %0.  */
+	"	lda %[fix], 0\n"
 	"	cvttq/svm $f31,$f31\n"
-		: "=&r"(test_pc), "=m"(opDEC_test_pc)
-		: );
+	"	lda %[fix], 4"
+	: [fix] "=r" (opDEC_fix)
+	: [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
+	: "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
 
-	opDEC_testing = 0;
-	opDEC_checked = 1;
-	unlock_kernel();
+	if (opDEC_fix)
+		printk("opDEC fixup enabled.\n");
 }
 
 void
@@ -244,7 +247,7 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 	siginfo_t info;
 	int signo, code;
 
-	if (!opDEC_testing || type != 4) {
+	if (regs->ps == 0) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -359,14 +362,6 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 			   fault during the boot sequence and testing if
 			   we get the correct PC.  If not, we set a flag
 			   to correct it every time through.  */
-			if (opDEC_testing) {
-				if (regs->pc == opDEC_test_pc) {
-					opDEC_fix = 4;
-					regs->pc += 4;
-					printk("opDEC fixup enabled.\n");
-				}
-				return;
-			}
 			regs->pc += opDEC_fix; 
 			
 			/* EV4 does not implement anything except normal
@@ -1083,22 +1078,22 @@ do_entUnaUser(void * va, unsigned long opcode,
 	return;
 }
 
-void
+void __init
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */
 	register unsigned long gptr __asm__("$29");
 	wrkgp(gptr);
 
+	/* Hack for Multia (UDB) and JENSEN: some of their SRMs have
+	   a bug in the handling of the opDEC fault.  Fix it up if so.  */
+	if (implver() == IMPLVER_EV4)
+		opDEC_check();
+
 	wrent(entArith, 1);
 	wrent(entMM, 2);
 	wrent(entIF, 3);
 	wrent(entUna, 4);
 	wrent(entSys, 5);
 	wrent(entDbg, 6);
-
-	/* Hack for Multia (UDB) and JENSEN: some of their SRMs have
-	   a bug in the handling of the opDEC fault.  Fix it up if so.  */
-	if (implver() == IMPLVER_EV4)
-		opDEC_check();
 }