Merge remote-tracking branches 'regulator/topic/doc',...

Merge remote-tracking branches 'regulator/topic/doc', 'regulator/topic/enable', 'regulator/topic/fan53555', 'regulator/topic/fixed', 'regulator/topic/gpio', 'regulator/topic/lp3971', 'regulator/topic/lp872x' and 'regulator/topic/max14577' into regulator-next

Documentation/devicetree/bindings/regulator/gpio-regulator.txt

@@ -8,8 +8,12 @@ Required properties:
 Optional properties:
 - enable-gpio		: GPIO to use to enable/disable the regulator.
 - gpios			: GPIO group used to control voltage.
+- gpios-states		: gpios pin's initial states array. 0: LOW, 1: HIGH.
+			  defualt is LOW if nothing is specified.
 - startup-delay-us	: Startup time in microseconds.
 - enable-active-high	: Polarity of GPIO is active high (default is low).
+- regulator-type	: Specifies what is being regulated, must be either
+			  "voltage" or "current", defaults to current.
 
 Any property defined as part of the core regulator binding defined in
 regulator.txt can also be used.

drivers/base/devres.c

@@ -790,6 +790,32 @@ void * devm_kmalloc(struct device *dev, size_t size, gfp_t gfp)
 }
 EXPORT_SYMBOL_GPL(devm_kmalloc);
 
+/**
+ * devm_kstrdup - Allocate resource managed space and
+ *                copy an existing string into that.
+ * @dev: Device to allocate memory for
+ * @s: the string to duplicate
+ * @gfp: the GFP mask used in the devm_kmalloc() call when
+ *       allocating memory
+ * RETURNS:
+ * Pointer to allocated string on success, NULL on failure.
+ */
+char *devm_kstrdup(struct device *dev, const char *s, gfp_t gfp)
+{
+	size_t size;
+	char *buf;
+
+	if (!s)
+		return NULL;
+
+	size = strlen(s) + 1;
+	buf = devm_kmalloc(dev, size, gfp);
+	if (buf)
+		memcpy(buf, s, size);
+	return buf;
+}
+EXPORT_SYMBOL_GPL(devm_kstrdup);
+
 /**
  * devm_kfree - Resource-managed kfree
  * @dev: Device this memory belongs to

drivers/of/base.c

@@ -903,6 +903,38 @@ struct device_node *of_find_node_by_phandle(phandle handle)
 }
 EXPORT_SYMBOL(of_find_node_by_phandle);
 
+/**
+ * of_property_count_elems_of_size - Count the number of elements in a property
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ * @elem_size:	size of the individual element
+ *
+ * Search for a property in a device node and count the number of elements of
+ * size elem_size in it. Returns number of elements on sucess, -EINVAL if the
+ * property does not exist or its length does not match a multiple of elem_size
+ * and -ENODATA if the property does not have a value.
+ */
+int of_property_count_elems_of_size(const struct device_node *np,
+				const char *propname, int elem_size)
+{
+	struct property *prop = of_find_property(np, propname, NULL);
+
+	if (!prop)
+		return -EINVAL;
+	if (!prop->value)
+		return -ENODATA;
+
+	if (prop->length % elem_size != 0) {
+		pr_err("size of %s in node %s is not a multiple of %d\n",
+		       propname, np->full_name, elem_size);
+		return -EINVAL;
+	}
+
+	return prop->length / elem_size;
+}
+EXPORT_SYMBOL_GPL(of_property_count_elems_of_size);
+
 /**
  * of_find_property_value_of_size
  *

drivers/regulator/fan53555.c

@@ -90,11 +90,11 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
 		return 0;
 	ret = regulator_map_voltage_linear(rdev, uV, uV);
 	if (ret < 0)
-		return -EINVAL;
+		return ret;
 	ret = regmap_update_bits(di->regmap, di->sleep_reg,
 					VSEL_NSEL_MASK, ret);
 	if (ret < 0)
-		return -EINVAL;
+		return ret;
 	/* Cache the sleep voltage setting.
 	 * Might not be the real voltage which is rounded */
 	di->sleep_vol_cache = uV;
@@ -244,10 +244,9 @@ static int fan53555_regulator_probe(struct i2c_client *client,
 
 	di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
 					GFP_KERNEL);
-	if (!di) {
-		dev_err(&client->dev, "Failed to allocate device info data!\n");
+	if (!di)
 		return -ENOMEM;
-	}
+
 	di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
 	if (IS_ERR(di->regmap)) {
 		dev_err(&client->dev, "Failed to allocate regmap!\n");
@@ -260,14 +259,14 @@ static int fan53555_regulator_probe(struct i2c_client *client,
 	ret = regmap_read(di->regmap, FAN53555_ID1, &val);
 	if (ret < 0) {
 		dev_err(&client->dev, "Failed to get chip ID!\n");
-		return -ENODEV;
+		return ret;
 	}
 	di->chip_id = val & DIE_ID;
 	/* Get chip revision */
 	ret = regmap_read(di->regmap, FAN53555_ID2, &val);
 	if (ret < 0) {
 		dev_err(&client->dev, "Failed to get chip Rev!\n");
-		return -ENODEV;
+		return ret;
 	}
 	di->chip_rev = val & DIE_REV;
 	dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n",

drivers/regulator/fixed.c

@@ -130,17 +130,15 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 
 	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
 			       GFP_KERNEL);
-	if (drvdata == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate device data\n");
-		ret = -ENOMEM;
-		goto err;
-	}
+	if (!drvdata)
+		return -ENOMEM;
 
-	drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+	drvdata->desc.name = devm_kstrdup(&pdev->dev,
+					  config->supply_name,
+					  GFP_KERNEL);
 	if (drvdata->desc.name == NULL) {
 		dev_err(&pdev->dev, "Failed to allocate supply name\n");
-		ret = -ENOMEM;
-		goto err;
+		return -ENOMEM;
 	}
 	drvdata->desc.type = REGULATOR_VOLTAGE;
 	drvdata->desc.owner = THIS_MODULE;
@@ -149,13 +147,13 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 	drvdata->desc.enable_time = config->startup_delay;
 
 	if (config->input_supply) {
-		drvdata->desc.supply_name = kstrdup(config->input_supply,
+		drvdata->desc.supply_name = devm_kstrdup(&pdev->dev,
+					    config->input_supply,
 					    GFP_KERNEL);
 		if (!drvdata->desc.supply_name) {
 			dev_err(&pdev->dev,
 				"Failed to allocate input supply\n");
-			ret = -ENOMEM;
-			goto err_name;
+			return -ENOMEM;
 		}
 	}
 
@@ -186,11 +184,12 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 	cfg.driver_data = drvdata;
 	cfg.of_node = pdev->dev.of_node;
 
-	drvdata->dev = regulator_register(&drvdata->desc, &cfg);
+	drvdata->dev = devm_regulator_register(&pdev->dev, &drvdata->desc,
+					       &cfg);
 	if (IS_ERR(drvdata->dev)) {
 		ret = PTR_ERR(drvdata->dev);
 		dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
-		goto err_input;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, drvdata);
@@ -199,24 +198,6 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 		drvdata->desc.fixed_uV);
 
 	return 0;
-
-err_input:
-	kfree(drvdata->desc.supply_name);
-err_name:
-	kfree(drvdata->desc.name);
-err:
-	return ret;
-}
-
-static int reg_fixed_voltage_remove(struct platform_device *pdev)
-{
-	struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
-
-	regulator_unregister(drvdata->dev);
-	kfree(drvdata->desc.supply_name);
-	kfree(drvdata->desc.name);
-
-	return 0;
 }
 
 #if defined(CONFIG_OF)
@@ -229,7 +210,6 @@ MODULE_DEVICE_TABLE(of, fixed_of_match);
 
 static struct platform_driver regulator_fixed_voltage_driver = {
 	.probe		= reg_fixed_voltage_probe,
-	.remove		= reg_fixed_voltage_remove,
 	.driver		= {
 		.name		= "reg-fixed-voltage",
 		.owner		= THIS_MODULE,

drivers/regulator/gpio-regulator.c

@@ -136,7 +136,6 @@ static struct gpio_regulator_config *
 of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
 {
 	struct gpio_regulator_config *config;
-	struct property *prop;
 	const char *regtype;
 	int proplen, gpio, i;
 	int ret;
@@ -172,22 +171,35 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
 	if (!config->gpios)
 		return ERR_PTR(-ENOMEM);
 
+	proplen = of_property_count_u32_elems(np, "gpios-states");
+	/* optional property */
+	if (proplen < 0)
+		proplen = 0;
+
+	if (proplen > 0 && proplen != config->nr_gpios) {
+		dev_warn(dev, "gpios <-> gpios-states mismatch\n");
+		proplen = 0;
+	}
+
 	for (i = 0; i < config->nr_gpios; i++) {
 		gpio = of_get_named_gpio(np, "gpios", i);
 		if (gpio < 0)
 			break;
 		config->gpios[i].gpio = gpio;
+		if (proplen > 0) {
+			of_property_read_u32_index(np, "gpios-states", i, &ret);
+			if (ret)
+				config->gpios[i].flags = GPIOF_OUT_INIT_HIGH;
+		}
 	}
 
 	/* Fetch states. */
-	prop = of_find_property(np, "states", NULL);
-	if (!prop) {
+	proplen = of_property_count_u32_elems(np, "states");
+	if (proplen < 0) {
 		dev_err(dev, "No 'states' property found\n");
 		return ERR_PTR(-EINVAL);
 	}
 
-	proplen = prop->length / sizeof(int);
-
 	config->states = devm_kzalloc(dev,
 				sizeof(struct gpio_regulator_state)
 				* (proplen / 2),
@@ -196,10 +208,10 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
 		return ERR_PTR(-ENOMEM);
 
 	for (i = 0; i < proplen / 2; i++) {
-		config->states[i].value =
-			be32_to_cpup((int *)prop->value + (i * 2));
-		config->states[i].gpios =
-			be32_to_cpup((int *)prop->value + (i * 2 + 1));
+		of_property_read_u32_index(np, "states", i * 2,
+					   &config->states[i].value);
+		of_property_read_u32_index(np, "states", i * 2 + 1,
+					   &config->states[i].gpios);
 	}
 	config->nr_states = i;
 
@@ -239,10 +251,8 @@ static int gpio_regulator_probe(struct platform_device *pdev)
 
 	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data),
 			       GFP_KERNEL);
-	if (drvdata == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate device data\n");
+	if (drvdata == NULL)
 		return -ENOMEM;
-	}
 
 	drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
 	if (drvdata->desc.name == NULL) {

drivers/regulator/helpers.c

@@ -37,10 +37,17 @@ int regulator_is_enabled_regmap(struct regulator_dev *rdev)
 	if (ret != 0)
 		return ret;
 
-	if (rdev->desc->enable_is_inverted)
-		return (val & rdev->desc->enable_mask) == 0;
-	else
-		return (val & rdev->desc->enable_mask) != 0;
+	val &= rdev->desc->enable_mask;
+
+	if (rdev->desc->enable_is_inverted) {
+		if (rdev->desc->enable_val)
+			return val != rdev->desc->enable_val;
+		return val == 0;
+	} else {
+		if (rdev->desc->enable_val)
+			return val == rdev->desc->enable_val;
+		return val != 0;
+	}
 }
 EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);
 
@@ -57,10 +64,13 @@ int regulator_enable_regmap(struct regulator_dev *rdev)
 {
 	unsigned int val;
 
-	if (rdev->desc->enable_is_inverted)
-		val = 0;
-	else
+	if (rdev->desc->enable_is_inverted) {
+		val = rdev->desc->disable_val;
+	} else {
+		val = rdev->desc->enable_val;
+		if (!val)
 			val = rdev->desc->enable_mask;
+	}
 
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  rdev->desc->enable_mask, val);
@@ -80,10 +90,13 @@ int regulator_disable_regmap(struct regulator_dev *rdev)
 {
 	unsigned int val;
 
-	if (rdev->desc->enable_is_inverted)
+	if (rdev->desc->enable_is_inverted) {
+		val = rdev->desc->enable_val;
+		if (!val)
 			val = rdev->desc->enable_mask;
-	else
-		val = 0;
+	} else {
+		val = rdev->desc->disable_val;
+	}
 
 	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				  rdev->desc->enable_mask, val);
@@ -419,10 +432,13 @@ int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable)
 {
 	unsigned int val;
 
-	if (enable)
+	if (enable) {
+		val = rdev->desc->bypass_val_on;
+		if (!val)
 			val = rdev->desc->bypass_mask;
-	else
-		val = 0;
+	} else {
+		val = rdev->desc->bypass_val_off;
+	}
 
 	return regmap_update_bits(rdev->regmap, rdev->desc->bypass_reg,
 				  rdev->desc->bypass_mask, val);

drivers/regulator/lp3971.c

@@ -327,7 +327,7 @@ static int lp3971_i2c_read(struct i2c_client *i2c, char reg, int count,
 		return -EIO;
 	ret = i2c_smbus_read_byte_data(i2c, reg);
 	if (ret < 0)
-		return -EIO;
+		return ret;
 
 	*dest = ret;
 	return 0;

drivers/regulator/lp872x.c

@@ -211,7 +211,7 @@ static int lp872x_get_timestep_usec(struct lp872x *lp)
 
 	ret = lp872x_read_byte(lp, LP872X_GENERAL_CFG, &val);
 	if (ret)
-		return -EINVAL;
+		return ret;
 
 	val = (val & mask) >> shift;
 	if (val >= size)
@@ -229,7 +229,7 @@ static int lp872x_regulator_enable_time(struct regulator_dev *rdev)
 	u8 addr, val;
 
 	if (time_step_us < 0)
-		return -EINVAL;
+		return time_step_us;
 
 	switch (rid) {
 	case LP8720_ID_LDO1 ... LP8720_ID_BUCK:

drivers/regulator/max14577.c

 /*
  * max14577.c - Regulator driver for the Maxim 14577
  *
- * Copyright (C) 2013 Samsung Electronics
+ * Copyright (C) 2013,2014 Samsung Electronics
  * Krzysztof Kozlowski <k.kozlowski@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -22,12 +22,6 @@
 #include <linux/mfd/max14577-private.h>
 #include <linux/regulator/of_regulator.h>
 
-struct max14577_regulator {
-	struct device *dev;
-	struct max14577 *max14577;
-	struct regulator_dev **regulators;
-};
-
 static int max14577_reg_is_enabled(struct regulator_dev *rdev)
 {
 	int rid = rdev_get_id(rdev);

include/linux/device.h

@@ -626,6 +626,7 @@ static inline void *devm_kcalloc(struct device *dev,
 	return devm_kmalloc_array(dev, n, size, flags | __GFP_ZERO);
 }
 extern void devm_kfree(struct device *dev, void *p);
+extern char *devm_kstrdup(struct device *dev, const char *s, gfp_t gfp);
 
 void __iomem *devm_ioremap_resource(struct device *dev, struct resource *res);
 void __iomem *devm_request_and_ioremap(struct device *dev,

include/linux/of.h

@@ -198,6 +198,8 @@ extern struct device_node *of_find_node_with_property(
 extern struct property *of_find_property(const struct device_node *np,
 					 const char *name,
 					 int *lenp);
+extern int of_property_count_elems_of_size(const struct device_node *np,
+				const char *propname, int elem_size);
 extern int of_property_read_u32_index(const struct device_node *np,
 				       const char *propname,
 				       u32 index, u32 *out_value);
@@ -390,6 +392,12 @@ static inline struct device_node *of_find_compatible_node(
 	return NULL;
 }
 
+static inline int of_property_count_elems_of_size(const struct device_node *np,
+			const char *propname, int elem_size)
+{
+	return -ENOSYS;
+}
+
 static inline int of_property_read_u32_index(const struct device_node *np,
 			const char *propname, u32 index, u32 *out_value)
 {
@@ -535,6 +543,74 @@ static inline struct device_node *of_find_matching_node(
 	return of_find_matching_node_and_match(from, matches, NULL);
 }
 
+/**
+ * of_property_count_u8_elems - Count the number of u8 elements in a property
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ *
+ * Search for a property in a device node and count the number of u8 elements
+ * in it. Returns number of elements on sucess, -EINVAL if the property does
+ * not exist or its length does not match a multiple of u8 and -ENODATA if the
+ * property does not have a value.
+ */
+static inline int of_property_count_u8_elems(const struct device_node *np,
+				const char *propname)
+{
+	return of_property_count_elems_of_size(np, propname, sizeof(u8));
+}
+
+/**
+ * of_property_count_u16_elems - Count the number of u16 elements in a property
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ *
+ * Search for a property in a device node and count the number of u16 elements
+ * in it. Returns number of elements on sucess, -EINVAL if the property does
+ * not exist or its length does not match a multiple of u16 and -ENODATA if the
+ * property does not have a value.
+ */
+static inline int of_property_count_u16_elems(const struct device_node *np,
+				const char *propname)
+{
+	return of_property_count_elems_of_size(np, propname, sizeof(u16));
+}
+
+/**
+ * of_property_count_u32_elems - Count the number of u32 elements in a property
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ *
+ * Search for a property in a device node and count the number of u32 elements
+ * in it. Returns number of elements on sucess, -EINVAL if the property does
+ * not exist or its length does not match a multiple of u32 and -ENODATA if the
+ * property does not have a value.
+ */
+static inline int of_property_count_u32_elems(const struct device_node *np,
+				const char *propname)
+{
+	return of_property_count_elems_of_size(np, propname, sizeof(u32));
+}
+
+/**
+ * of_property_count_u64_elems - Count the number of u64 elements in a property
+ *
+ * @np:		device node from which the property value is to be read.
+ * @propname:	name of the property to be searched.
+ *
+ * Search for a property in a device node and count the number of u64 elements
+ * in it. Returns number of elements on sucess, -EINVAL if the property does
+ * not exist or its length does not match a multiple of u64 and -ENODATA if the
+ * property does not have a value.
+ */
+static inline int of_property_count_u64_elems(const struct device_node *np,
+				const char *propname)
+{
+	return of_property_count_elems_of_size(np, propname, sizeof(u64));
+}
+
 /**
  * of_property_read_bool - Findfrom a property
  * @np:		device node from which the property value is to be read.

include/linux/regulator/driver.h

@@ -228,10 +228,14 @@ enum regulator_type {
  *                output when using regulator_set_voltage_sel_regmap
  * @enable_reg: Register for control when using regmap enable/disable ops
  * @enable_mask: Mask for control when using regmap enable/disable ops
+ * @enable_val: Enabling value for control when using regmap enable/disable ops
+ * @disable_val: Disabling value for control when using regmap enable/disable ops
  * @enable_is_inverted: A flag to indicate set enable_mask bits to disable
  *                      when using regulator_enable_regmap and friends APIs.
  * @bypass_reg: Register for control when using regmap set_bypass
  * @bypass_mask: Mask for control when using regmap set_bypass
+ * @bypass_val_on: Enabling value for control when using regmap set_bypass
+ * @bypass_val_off: Disabling value for control when using regmap set_bypass
  *
  * @enable_time: Time taken for initial enable of regulator (in uS).
  */
@@ -263,9 +267,13 @@ struct regulator_desc {
 	unsigned int apply_bit;
 	unsigned int enable_reg;
 	unsigned int enable_mask;
+	unsigned int enable_val;
+	unsigned int disable_val;
 	bool enable_is_inverted;
 	unsigned int bypass_reg;
 	unsigned int bypass_mask;
+	unsigned int bypass_val_on;
+	unsigned int bypass_val_off;
 
 	unsigned int enable_time;
 };