Commit 79f88ee9 authored by Shawn Guo's avatar Shawn Guo Committed by David S. Miller

net/smsc911x: add device tree probe support

It adds device tree probe support for smsc911x driver.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: default avatarGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ebdcc94b
* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
Required properties:
- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
- reg : Address and length of the io space for SMSC LAN
- interrupts : Should contain SMSC LAN interrupt line
- interrupt-parent : Should be the phandle for the interrupt controller
that services interrupts for this device
- phy-mode : String, operation mode of the PHY interface.
Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii",
"rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii".
Optional properties:
- reg-shift : Specify the quantity to shift the register offsets by
- reg-io-width : Specify the size (in bytes) of the IO accesses that
should be performed on the device. Valid value for SMSC LAN is
2 or 4. If it's omitted or invalid, the size would be 2.
- smsc,irq-active-high : Indicates the IRQ polarity is active-high
- smsc,irq-push-pull : Indicates the IRQ type is push-pull
- smsc,force-internal-phy : Forces SMSC LAN controller to use
internal PHY
- smsc,force-external-phy : Forces SMSC LAN controller to use
external PHY
- smsc,save-mac-address : Indicates that mac address needs to be saved
before resetting the controller
- local-mac-address : 6 bytes, mac address
Examples:
lan9220@f4000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0xf4000000 0x2000000>;
phy-mode = "mii";
interrupt-parent = <&gpio1>;
interrupts = <31>;
reg-io-width = <4>;
smsc,irq-push-pull;
};
......@@ -53,6 +53,10 @@
#include <linux/phy.h>
#include <linux/smsc911x.h>
#include <linux/device.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/of_net.h>
#include "smsc911x.h"
#define SMSC_CHIPNAME "smsc911x"
......@@ -2095,8 +2099,58 @@ static const struct smsc911x_ops shifted_smsc911x_ops = {
.tx_writefifo = smsc911x_tx_writefifo_shift,
};
#ifdef CONFIG_OF
static int __devinit smsc911x_probe_config_dt(
struct smsc911x_platform_config *config,
struct device_node *np)
{
const char *mac;
u32 width = 0;
if (!np)
return -ENODEV;
config->phy_interface = of_get_phy_mode(np);
mac = of_get_mac_address(np);
if (mac)
memcpy(config->mac, mac, ETH_ALEN);
of_property_read_u32(np, "reg-shift", &config->shift);
of_property_read_u32(np, "reg-io-width", &width);
if (width == 4)
config->flags |= SMSC911X_USE_32BIT;
if (of_get_property(np, "smsc,irq-active-high", NULL))
config->irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH;
if (of_get_property(np, "smsc,irq-push-pull", NULL))
config->irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL;
if (of_get_property(np, "smsc,force-internal-phy", NULL))
config->flags |= SMSC911X_FORCE_INTERNAL_PHY;
if (of_get_property(np, "smsc,force-external-phy", NULL))
config->flags |= SMSC911X_FORCE_EXTERNAL_PHY;
if (of_get_property(np, "smsc,save-mac-address", NULL))
config->flags |= SMSC911X_SAVE_MAC_ADDRESS;
return 0;
}
#else
static inline int smsc911x_probe_config_dt(
struct smsc911x_platform_config *config,
struct device_node *np)
{
return -ENODEV;
}
#endif /* CONFIG_OF */
static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct net_device *dev;
struct smsc911x_data *pdata;
struct smsc911x_platform_config *config = pdev->dev.platform_data;
......@@ -2107,13 +2161,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
pr_info("Driver version %s\n", SMSC_DRV_VERSION);
/* platform data specifies irq & dynamic bus configuration */
if (!pdev->dev.platform_data) {
pr_warn("platform_data not provided\n");
retval = -ENODEV;
goto out_0;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"smsc911x-memory");
if (!res)
......@@ -2152,9 +2199,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
irq_flags = irq_res->flags & IRQF_TRIGGER_MASK;
pdata->ioaddr = ioremap_nocache(res->start, res_size);
/* copy config parameters across to pdata */
memcpy(&pdata->config, config, sizeof(pdata->config));
pdata->dev = dev;
pdata->msg_enable = ((1 << debug) - 1);
......@@ -2164,10 +2208,22 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
goto out_free_netdev_2;
}
retval = smsc911x_probe_config_dt(&pdata->config, np);
if (retval && config) {
/* copy config parameters across to pdata */
memcpy(&pdata->config, config, sizeof(pdata->config));
retval = 0;
}
if (retval) {
SMSC_WARN(pdata, probe, "Error smsc911x config not found");
goto out_unmap_io_3;
}
/* assume standard, non-shifted, access to HW registers */
pdata->ops = &standard_smsc911x_ops;
/* apply the right access if shifting is needed */
if (config->shift)
if (pdata->config.shift)
pdata->ops = &shifted_smsc911x_ops;
retval = smsc911x_init(dev);
......@@ -2314,6 +2370,12 @@ static const struct dev_pm_ops smsc911x_pm_ops = {
#define SMSC911X_PM_OPS NULL
#endif
static const struct of_device_id smsc911x_dt_ids[] = {
{ .compatible = "smsc,lan9115", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, smsc911x_dt_ids);
static struct platform_driver smsc911x_driver = {
.probe = smsc911x_drv_probe,
.remove = __devexit_p(smsc911x_drv_remove),
......@@ -2321,6 +2383,7 @@ static struct platform_driver smsc911x_driver = {
.name = SMSC_CHIPNAME,
.owner = THIS_MODULE,
.pm = SMSC911X_PM_OPS,
.of_match_table = smsc911x_dt_ids,
},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment