Commit 7a208463 authored by Marcin Juszkiewicz's avatar Marcin Juszkiewicz Committed by Richard Purdie

backlight: Add Frontpath ProGear HX1050+ driver

Add control of LCD backlight for Frontpath ProGear HX1050+.
Patch is based on http://downloads.sf.net/progear/progear-lcd-0.2.tar.gz
driver by M Schacht.
Signed-off-by: default avatarMarcin Juszkiewicz <openembedded@hrw.one.pl>
Signed-off-by: default avatarRichard Purdie <rpurdie@rpsys.net>
parent 300abeb5
......@@ -66,3 +66,11 @@ config BACKLIGHT_HP680
If you have a HP Jornada 680, say y to enable the
backlight driver.
config BACKLIGHT_PROGEAR
tristate "Frontpath ProGear Backlight Driver"
depends on BACKLIGHT_DEVICE && PCI && X86
default n
help
If you have a Frontpath ProGear say Y to enable the
backlight driver.
......@@ -5,3 +5,4 @@ obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
/*
* Backlight Driver for Frontpath ProGear HX1050+
*
* Copyright (c) 2006 Marcin Juszkiewicz
*
* Based on Progear LCD driver by M Schacht
* <mschacht at alumni dot washington dot edu>
*
* Based on Sharp's Corgi Backlight Driver
* Based on Backlight Driver for HP Jornada 680
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/pci.h>
#include <asm/uaccess.h>
#define PMU_LPCR 0xB0
#define SB_MPS1 0x61
#define HW_LEVEL_MAX 0x77
#define HW_LEVEL_MIN 0x4f
static struct pci_dev *pmu_dev = NULL;
static struct pci_dev *sb_dev = NULL;
static int progearbl_set_intensity(struct backlight_device *bd)
{
int intensity = bd->props->brightness;
if (bd->props->power != FB_BLANK_UNBLANK)
intensity = 0;
if (bd->props->fb_blank != FB_BLANK_UNBLANK)
intensity = 0;
pci_write_config_byte(pmu_dev, PMU_LPCR, intensity + HW_LEVEL_MIN);
return 0;
}
static int progearbl_get_intensity(struct backlight_device *bd)
{
u8 intensity;
pci_read_config_byte(pmu_dev, PMU_LPCR, &intensity);
return intensity - HW_LEVEL_MIN;
}
static struct backlight_properties progearbl_data = {
.owner = THIS_MODULE,
.get_brightness = progearbl_get_intensity,
.update_status = progearbl_set_intensity,
};
static int progearbl_probe(struct platform_device *pdev)
{
u8 temp;
struct backlight_device *progear_backlight_device;
pmu_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, 0);
if (!pmu_dev) {
printk("ALI M7101 PMU not found.\n");
return -ENODEV;
}
sb_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, 0);
if (!sb_dev) {
printk("ALI 1533 SB not found.\n");
pci_dev_put(pmu_dev);
return -ENODEV;
}
/* Set SB_MPS1 to enable brightness control. */
pci_read_config_byte(sb_dev, SB_MPS1, &temp);
pci_write_config_byte(sb_dev, SB_MPS1, temp | 0x20);
progear_backlight_device = backlight_device_register("progear-bl",
&pdev->dev, NULL,
&progearbl_data);
if (IS_ERR(progear_backlight_device))
return PTR_ERR(progear_backlight_device);
platform_set_drvdata(pdev, progear_backlight_device);
progearbl_data.power = FB_BLANK_UNBLANK;
progearbl_data.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
progearbl_data.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
progearbl_set_intensity(progear_backlight_device);
return 0;
}
static int progearbl_remove(struct platform_device *pdev)
{
struct backlight_device *bd = platform_get_drvdata(pdev);
backlight_device_unregister(bd);
return 0;
}
static struct platform_driver progearbl_driver = {
.probe = progearbl_probe,
.remove = progearbl_remove,
.driver = {
.name = "progear-bl",
},
};
static struct platform_device *progearbl_device;
static int __init progearbl_init(void)
{
int ret = platform_driver_register(&progearbl_driver);
if (!ret) {
progearbl_device = platform_device_alloc("progear-bl", -1);
if (!progearbl_device)
return -ENOMEM;
ret = platform_device_add(progearbl_device);
if (ret) {
platform_device_put(progearbl_device);
platform_driver_unregister(&progearbl_driver);
}
}
return ret;
}
static void __exit progearbl_exit(void)
{
pci_dev_put(pmu_dev);
pci_dev_put(sb_dev);
platform_device_unregister(progearbl_device);
platform_driver_unregister(&progearbl_driver);
}
module_init(progearbl_init);
module_exit(progearbl_exit);
MODULE_AUTHOR("Marcin Juszkiewicz <linux@hrw.one.pl>");
MODULE_DESCRIPTION("ProGear Backlight Driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment