Merge branch 'cpufreq-next' of git://git.linaro.org/people/vireshk/linux into pm-cpufreq

ARM cpufreq updates from Viresh Kumar.

Documentation/powerpc/transactional_memory.txt

@@ -147,6 +147,25 @@ Example signal handler:
       fix_the_problem(ucp->dar);
     }
 
+When in an active transaction that takes a signal, we need to be careful with
+the stack.  It's possible that the stack has moved back up after the tbegin.
+The obvious case here is when the tbegin is called inside a function that
+returns before a tend.  In this case, the stack is part of the checkpointed
+transactional memory state.  If we write over this non transactionally or in
+suspend, we are in trouble because if we get a tm abort, the program counter and
+stack pointer will be back at the tbegin but our in memory stack won't be valid
+anymore.
+
+To avoid this, when taking a signal in an active transaction, we need to use
+the stack pointer from the checkpointed state, rather than the speculated
+state.  This ensures that the signal context (written tm suspended) will be
+written below the stack required for the rollback.  The transaction is aborted
+becuase of the treclaim, so any memory written between the tbegin and the
+signal will be rolled back anyway.
+
+For signals taken in non-TM or suspended mode, we use the
+normal/non-checkpointed stack pointer.
+
 
 Failure cause codes used by kernel
 ==================================
@@ -155,14 +174,18 @@ These are defined in <asm/reg.h>, and distinguish different reasons why the
 kernel aborted a transaction:
 
  TM_CAUSE_RESCHED       Thread was rescheduled.
+ TM_CAUSE_TLBI          Software TLB invalide.
  TM_CAUSE_FAC_UNAV      FP/VEC/VSX unavailable trap.
  TM_CAUSE_SYSCALL       Currently unused; future syscalls that must abort
                         transactions for consistency will use this.
  TM_CAUSE_SIGNAL        Signal delivered.
  TM_CAUSE_MISC          Currently unused.
+ TM_CAUSE_ALIGNMENT     Alignment fault.
+ TM_CAUSE_EMULATE       Emulation that touched memory.
 
-These can be checked by the user program's abort handler as TEXASR[0:7].
-
+These can be checked by the user program's abort handler as TEXASR[0:7].  If
+bit 7 is set, it indicates that the error is consider persistent.  For example
+a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q
 
 GDB
 ===

MAINTAINERS

@@ -3323,11 +3323,12 @@ F:	drivers/net/wan/dlci.c
 F:	drivers/net/wan/sdla.c
 
 FRAMEBUFFER LAYER
-M:	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+M:	Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
+M:	Tomi Valkeinen <tomi.valkeinen@ti.com>
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
 Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
-T:	git git://github.com/schandinat/linux-2.6.git fbdev-next
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git
 S:	Maintained
 F:	Documentation/fb/
 F:	Documentation/devicetree/bindings/fb/
@@ -6088,7 +6089,15 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git
 S:	Maintained
 F:	arch/parisc/
+F:	Documentation/parisc/
 F:	drivers/parisc/
+F:	drivers/char/agp/parisc-agp.c
+F:	drivers/input/serio/gscps2.c
+F:	drivers/parport/parport_gsc.*
+F:	drivers/tty/serial/8250/8250_gsc.c
+F:	drivers/video/sti*
+F:	drivers/video/console/sti*
+F:	drivers/video/logo/logo_parisc*
 
 PC87360 HARDWARE MONITORING DRIVER
 M:	Jim Cromie <jim.cromie@gmail.com>

Makefile

 VERSION = 3
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/arm/boot/dts/exynos5250.dtsi

@@ -497,6 +497,21 @@ usb@12120000 {
 		clock-names = "usbhost";
 	};
 
+	usbphy@12130000 {
+		compatible = "samsung,exynos5250-usb2phy";
+		reg = <0x12130000 0x100>;
+		clocks = <&clock 1>, <&clock 285>;
+		clock-names = "ext_xtal", "usbhost";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usbphy-sys {
+			reg = <0x10040704 0x8>,
+			      <0x10050230 0x4>;
+		};
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/configs/exynos_defconfig

-CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
@@ -7,17 +7,18 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
 CONFIG_ARCH_EXYNOS=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_LOWLEVEL_UART_PORT=3
 CONFIG_S3C24XX_PWM=y
 CONFIG_ARCH_EXYNOS5=y
 CONFIG_MACH_EXYNOS4_DT=y
-CONFIG_MACH_EXYNOS5_DT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
@@ -30,35 +31,58 @@ CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_RFKILL_REGULATOR=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=m
 CONFIG_NETDEVICES=y
 CONFIG_SMSC911X=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_KEYBOARD_CROS_EC=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_CYAPA=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_SAMSUNG=y
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_HW_RANDOM=y
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_I2C_INFINEON=y
 CONFIG_I2C=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_S3C2410=y
+CONFIG_DEBUG_GPIO=y
 # CONFIG_HWMON is not set
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_MAX77686=y
+CONFIG_MFD_MAX8997=y
+CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_TPS65090=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MAX8997=y
+CONFIG_REGULATOR_MAX77686=y
+CONFIG_REGULATOR_S5M8767=y
 CONFIG_REGULATOR_TPS65090=y
 CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_SIMPLE=y
 CONFIG_EXYNOS_VIDEO=y
 CONFIG_EXYNOS_MIPI_DSI=y
 CONFIG_EXYNOS_DP=y
@@ -67,6 +91,20 @@ CONFIG_FONTS=y
 CONFIG_FONT_7x14=y
 CONFIG_LOGO=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_S5P=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_PHY=y
+CONFIG_SAMSUNG_USB2PHY=y
+CONFIG_SAMSUNG_USB3PHY=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_S3C=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
@@ -79,6 +117,7 @@ CONFIG_ROMFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
@@ -87,6 +126,5 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_SHA256=y
 CONFIG_CRC_CCITT=y

arch/arm/mach-exynos/Kconfig

@@ -250,6 +250,7 @@ config MACH_ARMLEX4210
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
 	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_EXYNOS4210
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
@@ -281,7 +282,6 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_TV
 	select S5P_GPIO_INT
 	select S5P_SETUP_MIPIPHY
-	select SAMSUNG_HRT
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT
 	depends on ARCH_EXYNOS4
 	select ARM_AMBA
 	select CLKSRC_OF
+	select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
 	select CPU_EXYNOS4210
 	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
 	select PINCTRL

arch/arm/mach-exynos/common.c

@@ -10,12 +10,14 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/bitops.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqchip.h>
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
+#include <clocksource/samsung_pwm.h>
 #include <linux/sched.h>
 #include <linux/serial_core.h>
 #include <linux/of.h>
@@ -302,6 +304,13 @@ static struct map_desc exynos5440_iodesc0[] __initdata = {
 	},
 };
 
+static struct samsung_pwm_variant exynos4_pwm_variant = {
+	.bits		= 32,
+	.div_base	= 0,
+	.has_tint_cstat	= true,
+	.tclk_mask	= 0,
+};
+
 void exynos4_restart(char mode, const char *cmd)
 {
 	__raw_writel(0x1, S5P_SWRESET);
@@ -317,9 +326,16 @@ void exynos5_restart(char mode, const char *cmd)
 		val = 0x1;
 		addr = EXYNOS_SWRESET;
 	} else if (of_machine_is_compatible("samsung,exynos5440")) {
+		u32 status;
 		np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
+
+		addr = of_iomap(np, 0) + 0xbc;
+		status = __raw_readl(addr);
+
 		addr = of_iomap(np, 0) + 0xcc;
-		val = (0xfff << 20) | (0x1 << 16);
+		val = __raw_readl(addr);
+
+		val = (val & 0xffff0000) | (status & 0xffff);
 	} else {
 		pr_err("%s: cannot support non-DT\n", __func__);
 		return;
@@ -442,8 +458,20 @@ static void __init exynos5440_map_io(void)
 	iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
 }
 
+void __init exynos_set_timer_source(u8 channels)
+{
+	exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	exynos4_pwm_variant.output_mask &= ~channels;
+}
+
 void __init exynos_init_time(void)
 {
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC,
+		EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC,
+		EXYNOS4_IRQ_TIMER4_VIC,
+	};
+
 	if (of_have_populated_dt()) {
 #ifdef CONFIG_OF
 		of_clk_init(NULL);
@@ -455,7 +483,14 @@ void __init exynos_init_time(void)
 		exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1);
 		exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
 #endif
-		mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1);
+#ifdef CONFIG_CLKSRC_SAMSUNG_PWM
+		if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+			samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &exynos4_pwm_variant);
+		else
+#endif
+			mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0,
+					EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1);
 	}
 }
 

arch/arm/mach-exynos/common.h

@@ -32,6 +32,8 @@ void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
 
 void exynos_firmware_init(void);
 
+void exynos_set_timer_source(u8 channels);
+
 #ifdef CONFIG_PM_GENERIC_DOMAINS
 int exynos_pm_late_initcall(void);
 #else

arch/arm/mach-exynos/include/mach/pm-core.h

@@ -18,8 +18,15 @@
 #ifndef __ASM_ARCH_PM_CORE_H
 #define __ASM_ARCH_PM_CORE_H __FILE__
 
+#include <linux/of.h>
 #include <mach/regs-pmu.h>
 
+#ifdef CONFIG_PINCTRL_EXYNOS
+extern u32 exynos_get_eint_wake_mask(void);
+#else
+static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
+#endif
+
 static inline void s3c_pm_debug_init_uart(void)
 {
 	/* nothing here yet */
@@ -27,7 +34,12 @@ static inline void s3c_pm_debug_init_uart(void)
 
 static inline void s3c_pm_arch_prepare_irqs(void)
 {
-	__raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
+	u32 eintmask = s3c_irqwake_eintmask;
+
+	if (of_have_populated_dt())
+		eintmask = exynos_get_eint_wake_mask();
+
+	__raw_writel(eintmask, S5P_EINT_WAKEUP_MASK);
 	__raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
 }
 

arch/arm/mach-exynos/mach-universal_c210.c

@@ -41,7 +41,6 @@
 #include <plat/mfc.h>
 #include <plat/sdhci.h>
 #include <plat/fimc-core.h>
-#include <plat/samsung-time.h>
 #include <plat/camport.h>
 
 #include <mach/map.h>
@@ -1094,7 +1093,7 @@ static void __init universal_map_io(void)
 {
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
-	samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
+	exynos_set_timer_source(BIT(2) | BIT(4));
 	xxti_f = 0;
 	xusbxti_f = 24000000;
 }
@@ -1154,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.map_io		= universal_map_io,
 	.init_machine	= universal_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= samsung_timer_init,
+	.init_time	= exynos_init_time,
 	.reserve        = &universal_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/plat-samsung/devs.c

@@ -311,9 +311,9 @@ struct platform_device s5p_device_jpeg = {
 #ifdef CONFIG_S5P_DEV_FIMD0
 static struct resource s5p_fimd0_resource[] = {
 	[0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K),
-	[1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC),
-	[2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO),
-	[3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM),
+	[1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"),
+	[2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"),
+	[3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"),
 };
 
 struct platform_device s5p_device_fimd0 = {

arch/arm64/kernel/arm64ksyms.c

@@ -34,6 +34,7 @@ EXPORT_SYMBOL(__strnlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 
 EXPORT_SYMBOL(copy_page);
+EXPORT_SYMBOL(clear_page);
 
 EXPORT_SYMBOL(__copy_from_user);
 EXPORT_SYMBOL(__copy_to_user);

arch/arm64/kernel/entry.S

@@ -390,6 +390,16 @@ el0_sync_compat:
 	b.eq	el0_fpsimd_exc
 	cmp	x24, #ESR_EL1_EC_UNKNOWN	// unknown exception in EL0
 	b.eq	el0_undef
+	cmp	x24, #ESR_EL1_EC_CP15_32	// CP15 MRC/MCR trap
+	b.eq	el0_undef
+	cmp	x24, #ESR_EL1_EC_CP15_64	// CP15 MRRC/MCRR trap
+	b.eq	el0_undef
+	cmp	x24, #ESR_EL1_EC_CP14_MR	// CP14 MRC/MCR trap
+	b.eq	el0_undef
+	cmp	x24, #ESR_EL1_EC_CP14_LS	// CP14 LDC/STC trap
+	b.eq	el0_undef
+	cmp	x24, #ESR_EL1_EC_CP14_64	// CP14 MRRC/MCRR trap
+	b.eq	el0_undef
 	cmp	x24, #ESR_EL1_EC_BREAKPT_EL0	// debug exception in EL0
 	b.ge	el0_dbg
 	b	el0_inv

arch/arm64/kernel/traps.c

@@ -267,7 +267,8 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 		return;
 #endif
 
-	if (show_unhandled_signals) {
+	if (show_unhandled_signals && unhandled_signal(current, SIGILL) &&
+	    printk_ratelimit()) {
 		pr_info("%s[%d]: undefined instruction: pc=%p\n",
 			current->comm, task_pid_nr(current), pc);
 		dump_instr(KERN_INFO, regs);
@@ -294,7 +295,7 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs)
 	}
 #endif
 
-	if (show_unhandled_signals) {
+	if (show_unhandled_signals && printk_ratelimit()) {
 		pr_info("%s[%d]: syscall %d\n", current->comm,
 			task_pid_nr(current), (int)regs->syscallno);
 		dump_instr("", regs);
@@ -310,14 +311,20 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs)
  */
 asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
 {
+	siginfo_t info;
+	void __user *pc = (void __user *)instruction_pointer(regs);
 	console_verbose();
 
 	pr_crit("Bad mode in %s handler detected, code 0x%08x\n",
 		handler[reason], esr);
+	__show_regs(regs);
+
+	info.si_signo = SIGILL;
+	info.si_errno = 0;
+	info.si_code  = ILL_ILLOPC;
+	info.si_addr  = pc;
 
-	die("Oops - bad mode", regs, 0);
-	local_irq_disable();
-	panic("bad mode");
+	arm64_notify_die("Oops - bad mode", regs, &info, 0);
 }
 
 void __pte_error(const char *file, int line, unsigned long val)

arch/arm64/mm/fault.c

@@ -113,7 +113,8 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr,
 {
 	struct siginfo si;
 
-	if (show_unhandled_signals) {
+	if (show_unhandled_signals && unhandled_signal(tsk, sig) &&
+	    printk_ratelimit()) {
 		pr_info("%s[%d]: unhandled %s (%d) at 0x%08lx, esr 0x%03x\n",
 			tsk->comm, task_pid_nr(tsk), fault_name(esr), sig,
 			addr, esr);