Commit 7a6f4369 authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

[TG3]: Add tg3_poll_fw().

Put the firmware polling logic into a separate function.  This makes
the code cleaner.
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 126a3368
...@@ -4662,6 +4662,35 @@ static void tg3_write_sig_legacy(struct tg3 *tp, int kind) ...@@ -4662,6 +4662,35 @@ static void tg3_write_sig_legacy(struct tg3 *tp, int kind)
} }
} }
static int tg3_poll_fw(struct tg3 *tp)
{
int i;
u32 val;
/* Wait for firmware initialization to complete. */
for (i = 0; i < 100000; i++) {
tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
break;
udelay(10);
}
/* Chip might not be fitted with firmware. Some Sun onboard
* parts are configured like that. So don't signal the timeout
* of the above loop as an error, but do report the lack of
* running firmware once.
*/
if (i >= 100000 &&
!(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) {
tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED;
printk(KERN_INFO PFX "%s: No firmware running.\n",
tp->dev->name);
}
return 0;
}
static void tg3_stop_fw(struct tg3 *); static void tg3_stop_fw(struct tg3 *);
/* tp->lock is held. */ /* tp->lock is held. */
...@@ -4669,7 +4698,7 @@ static int tg3_chip_reset(struct tg3 *tp) ...@@ -4669,7 +4698,7 @@ static int tg3_chip_reset(struct tg3 *tp)
{ {
u32 val; u32 val;
void (*write_op)(struct tg3 *, u32, u32); void (*write_op)(struct tg3 *, u32, u32);
int i; int err;
tg3_nvram_lock(tp); tg3_nvram_lock(tp);
...@@ -4829,26 +4858,9 @@ static int tg3_chip_reset(struct tg3 *tp) ...@@ -4829,26 +4858,9 @@ static int tg3_chip_reset(struct tg3 *tp)
tw32_f(MAC_MODE, 0); tw32_f(MAC_MODE, 0);
udelay(40); udelay(40);
/* Wait for firmware initialization to complete. */ err = tg3_poll_fw(tp);
for (i = 0; i < 100000; i++) { if (err)
tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val); return err;
if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
break;
udelay(10);
}
/* Chip might not be fitted with firmare. Some Sun onboard
* parts are configured like that. So don't signal the timeout
* of the above loop as an error, but do report the lack of
* running firmware once.
*/
if (i >= 100000 &&
!(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) {
tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED;
printk(KERN_INFO PFX "%s: No firmware running.\n",
tp->dev->name);
}
if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) && if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
tp->pci_chip_rev_id != CHIPREV_ID_5750_A0) { tp->pci_chip_rev_id != CHIPREV_ID_5750_A0) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment