dt-bindings: xilinx-sdfec: Add SDFEC binding

Add the Soft Decision Forward Error Correction (SDFEC) Engine
bindings which is available for the Zynq UltraScale+ RFSoC
FPGA's.
Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

 .../devicetree/bindings/misc/xlnx,sd-fec.txt       | 58 ++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt

+* Xilinx SDFEC(16nm) IP *
+
+The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
+which provides high-throughput LDPC and Turbo Code implementations.
+The LDPC decode & encode functionality is capable of covering a range of
+customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
+principally covers codes used by LTE. The FEC Engine offers significant
+power and area savings versus implementations done in the FPGA fabric.
+
+
+Required properties:
+- compatible: Must be "xlnx,sd-fec-1.1"
+- clock-names : List of input clock names from the following:
+    - "core_clk", Main processing clock for processing core (required)
+    - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
+    - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
+    - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
+    - "s_axis_ctrl_aclk",  Control input AXI4-Stream Slave interface clock (optional)
+    - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
+    - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
+    - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
+- clocks : Clock phandles (see clock_bindings.txt for details).
+- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
+  location and length.
+- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
+  being used.
+- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
+  driven with a fixed value and is not present on the device, a value of 1
+  configures the DIN_WORDS to be block based, while a value of 2 configures the
+  DIN_WORDS input to be supplied for each AXI transaction.
+- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
+  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
+  of "4x128b".
+- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
+  driven with a fixed value and is not present on the device, a value of 1
+  configures the DOUT_WORDS to be block based, while a value of 2 configures the
+  DOUT_WORDS input to be supplied for each AXI transaction.
+- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
+  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
+  of "4x128b".
+Optional properties:
+- interrupts: should contain SDFEC interrupt number
+
+Example
+---------------------------------------
+	sd_fec_0: sd-fec@a0040000 {
+		compatible = "xlnx,sd-fec-1.1";
+		clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk";
+		clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>;
+		reg = <0x0 0xa0040000 0x0 0x40000>;
+		interrupt-parent = <&axi_intc>;
+		interrupts = <1 0>;
+		xlnx,sdfec-code = "ldpc";
+		xlnx,sdfec-din-words = <0>;
+		xlnx,sdfec-din-width = <2>;
+		xlnx,sdfec-dout-words = <0>;
+		xlnx,sdfec-dout-width = <1>;
+	};