Skip to content

L
linux
Commit 7aefd944 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'hwmon-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging 

Pull hwmon updates from Guenter Roeck:

 - Add driver for Intersil ISL68137 PWM Controller

 - Add driver for Lochnagar 2

 - Add driver for Infineon IR38064 Voltage Regulator

 - Add support for TMP75B to lm75 driver

 - Convert documentation to ReST format

 - Use request_muxed_region for Super-IO accesses in several drivers

 - Add 'samples' attribute to ABI, and start using it

 - Add support for custom sysfs attributes to pmbus drivers (used in
   ISL68137 driver)

 - Introduce HWMON_CHANNEL_INFO macro

 - Automated changes:
      - Use permission specific [SENSOR_][DEVICE_]ATTR variants
      - Fix build warnings due to unused of_device_id structures
      - Use HWMON_CHANNEL_INFO macro

 - Various minor improvements and fixes

* tag 'hwmon-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (125 commits)
  hwmon: (lm75) Add support for TMP75B
  dt-bindings: hwmon: Add tmp75b to lm75.txt
  hwmon: (s3c) Use dev_get_drvdata()
  hwmon: (max6650) Drop call to thermal_cdev_update
  docs: hwmon: remove the extension from .rst files
  docs: hwmon: convert three docs to ReST format
  hwmon: (max6650) add thermal cooling device capability
  hwmon: (ina3221) Add voltage conversion time settings
  hwmon: (ina3221) Do not read-back to cache reg_config
  docs: hwmon: Add an index file and rename docs to *.rst
  docs: hwmon: convert remaining files to ReST format
  docs: hwmon: misc files: convert to ReST format
  docs: hwmon: pmbus files: convert to ReST format
  docs: hwmon: k8temp, w83793: convert to ReST format
  docs: hwmon: da9052, da9055: convert to ReST format
  docs: hwmon: wm831x, wm8350: convert to ReST format
  docs: hwmon: dme1737, vt1211: convert to ReST format
  docs: hwmon: ads1015: convert to ReST format
  docs: hwmon: asc7621: convert to ReST format
  docs: hwmon: ibmpowernv: convert to ReST format
  ...
parents ffa6f55e 39abe9d8
Expand all Show whitespace changes
Inline Side-by-side
Showing with 8914 additions and 4400 deletions
Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt 0 → 100644
View file @ 7aefd944
Cirrus Logic Lochnagar Audio Development Board
Lochnagar is an evaluation and development board for Cirrus Logic
Smart CODEC and Amp devices. It allows the connection of most Cirrus
Logic devices on mini-cards, as well as allowing connection of
various application processor systems to provide a full evaluation
platform. Audio system topology, clocking and power can all be
controlled through the Lochnagar, allowing the device under test
to be used in a variety of possible use cases.
This binding document describes the binding for the hardware monitor
portion of the driver.
This binding must be part of the Lochnagar MFD binding:
[4] ../mfd/cirrus,lochnagar.txt
Required properties:
- compatible : One of the following strings:
"cirrus,lochnagar2-hwmon"
Example:
lochnagar-hwmon {
compatible = "cirrus,lochnagar2-hwmon";
};
Documentation/devicetree/bindings/hwmon/g762.txt
View file @ 7aefd944
......@@ -21,7 +21,7 @@ If an optional property is not set in .dts file, then current value is kept
unmodified (e.g. u-boot installed value).
Additional information on operational parameters for the device is available
in Documentation/hwmon/g762. A detailed datasheet for the device is available
in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available
at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf.
Example g762 node:
......
Documentation/devicetree/bindings/hwmon/lm75.txt
View file @ 7aefd944
......@@ -25,6 +25,7 @@ Required properties:
"ti,tmp175",
"ti,tmp275",
"ti,tmp75",
"ti,tmp75b",
"ti,tmp75c",
- reg: I2C bus address of the device
......
Documentation/devicetree/bindings/hwmon/pwm-fan.txt
View file @ 7aefd944
......@@ -8,6 +8,15 @@ Required properties:
Optional properties:
- fan-supply : phandle to the regulator that provides power to the fan
- interrupts : This contains a single interrupt specifier which
describes the tachometer output of the fan as an
interrupt source. The output signal must generate a
defined number of interrupts per fan revolution, which
require that it must be self resetting edge interrupts.
See interrupt-controller/interrupts.txt for the format.
- pulses-per-revolution : define the tachometer pulses per fan revolution as
an integer (default is 2 interrupts per revolution).
The value must be greater than zero.
Example:
fan0: pwm-fan {
......@@ -38,3 +47,13 @@ Example:
};
};
};
Example 2:
fan0: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm 0 40000 0>;
fan-supply = <&reg_fan>;
interrupt-parent = <&gpio5>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
pulses-per-revolution = <2>;
};
Documentation/hwmon/ab8500 → Documentation/hwmon/ab8500.rst
View file @ 7aefd944
......@@ -2,19 +2,23 @@ Kernel driver ab8500
====================
Supported chips:
* ST-Ericsson AB8500
Prefix: 'ab8500'
Addresses scanned: -
Datasheet: http://www.stericsson.com/developers/documentation.jsp
Authors:
Martin Persson <martin.persson@stericsson.com>
Hongbo Zhang <hongbo.zhang@linaro.org>
- Martin Persson <martin.persson@stericsson.com>
- Hongbo Zhang <hongbo.zhang@linaro.org>
Description
-----------
See also Documentation/hwmon/abx500. This is the ST-Ericsson AB8500 specific
See also Documentation/hwmon/abx500.rst. This is the ST-Ericsson AB8500 specific
driver.
Currently only the AB8500 internal sensor and one external sensor for battery
......
Documentation/hwmon/abituguru-datasheet → Documentation/hwmon/abituguru-datasheet.rst
View file @ 7aefd944
===============
uGuru datasheet
===============
......@@ -168,34 +169,35 @@ This bank contains 0 sensors, iow the sensor address is ignored (but must be
written) just use 0. Bank 0x20 contains 3 bytes:
Byte 0:
This byte holds the alarm flags for sensor 0-7 of Sensor Bank1, with bit 0
corresponding to sensor 0, 1 to 1, etc.
This byte holds the alarm flags for sensor 0-7 of Sensor Bank1, with bit 0
corresponding to sensor 0, 1 to 1, etc.
Byte 1:
This byte holds the alarm flags for sensor 8-15 of Sensor Bank1, with bit 0
corresponding to sensor 8, 1 to 9, etc.
This byte holds the alarm flags for sensor 8-15 of Sensor Bank1, with bit 0
corresponding to sensor 8, 1 to 9, etc.
Byte 2:
This byte holds the alarm flags for sensor 0-5 of Sensor Bank2, with bit 0
corresponding to sensor 0, 1 to 1, etc.
This byte holds the alarm flags for sensor 0-5 of Sensor Bank2, with bit 0
corresponding to sensor 0, 1 to 1, etc.
Bank 0x21 Sensor Bank1 Values / Readings (R)
--------------------------------------------
This bank contains 16 sensors, for each sensor it contains 1 byte.
So far the following sensors are known to be available on all motherboards:
Sensor 0 CPU temp
Sensor 1 SYS temp
Sensor 3 CPU core volt
Sensor 4 DDR volt
Sensor 10 DDR Vtt volt
Sensor 15 PWM temp
- Sensor 0 CPU temp
- Sensor 1 SYS temp
- Sensor 3 CPU core volt
- Sensor 4 DDR volt
- Sensor 10 DDR Vtt volt
- Sensor 15 PWM temp
Byte 0:
This byte holds the reading from the sensor. Sensors in Bank1 can be both
volt and temp sensors, this is motherboard specific. The uGuru however does
seem to know (be programmed with) what kindoff sensor is attached see Sensor
Bank1 Settings description.
This byte holds the reading from the sensor. Sensors in Bank1 can be both
volt and temp sensors, this is motherboard specific. The uGuru however does
seem to know (be programmed with) what kindoff sensor is attached see Sensor
Bank1 Settings description.
Volt sensors use a linear scale, a reading 0 corresponds with 0 volt and a
reading of 255 with 3494 mV. The sensors for higher voltages however are
......@@ -207,96 +209,118 @@ Temp sensors also use a linear scale, a reading of 0 corresponds with 0 degree
Celsius and a reading of 255 with a reading of 255 degrees Celsius.
Bank 0x22 Sensor Bank1 Settings (R)
Bank 0x23 Sensor Bank1 Settings (W)
-----------------------------------
Bank 0x22 Sensor Bank1 Settings (R) and Bank 0x23 Sensor Bank1 Settings (W)
---------------------------------------------------------------------------
This bank contains 16 sensors, for each sensor it contains 3 bytes. Each
Those banks contain 16 sensors, for each sensor it contains 3 bytes. Each
set of 3 bytes contains the settings for the sensor with the same sensor
address in Bank 0x21 .
Byte 0:
Alarm behaviour for the selected sensor. A 1 enables the described behaviour.
Bit 0: Give an alarm if measured temp is over the warning threshold (RW) *
Bit 1: Give an alarm if measured volt is over the max threshold (RW) **
Bit 2: Give an alarm if measured volt is under the min threshold (RW) **
Bit 3: Beep if alarm (RW)
Bit 4: 1 if alarm cause measured temp is over the warning threshold (R)
Bit 5: 1 if alarm cause measured volt is over the max threshold (R)
Bit 6: 1 if alarm cause measured volt is under the min threshold (R)
Bit 7: Volt sensor: Shutdown if alarm persist for more than 4 seconds (RW)
Temp sensor: Shutdown if temp is over the shutdown threshold (RW)
* This bit is only honored/used by the uGuru if a temp sensor is connected
** This bit is only honored/used by the uGuru if a volt sensor is connected
Note with some trickery this can be used to find out what kinda sensor is
detected see the Linux kernel driver for an example with many comments on
how todo this.
Alarm behaviour for the selected sensor. A 1 enables the described
behaviour.
Bit 0:
Give an alarm if measured temp is over the warning threshold (RW) [1]_
Bit 1:
Give an alarm if measured volt is over the max threshold (RW) [2]_
Bit 2:
Give an alarm if measured volt is under the min threshold (RW) [2]_
Bit 3:
Beep if alarm (RW)
Bit 4:
1 if alarm cause measured temp is over the warning threshold (R)
Bit 5:
1 if alarm cause measured volt is over the max threshold (R)
Bit 6:
1 if alarm cause measured volt is under the min threshold (R)
Bit 7:
- Volt sensor: Shutdown if alarm persist for more than 4 seconds (RW)
- Temp sensor: Shutdown if temp is over the shutdown threshold (RW)
.. [1] This bit is only honored/used by the uGuru if a temp sensor is connected
.. [2] This bit is only honored/used by the uGuru if a volt sensor is connected
Note with some trickery this can be used to find out what kinda sensor
is detected see the Linux kernel driver for an example with many
comments on how todo this.
Byte 1:
Temp sensor: warning threshold (scale as bank 0x21)
Volt sensor: min threshold (scale as bank 0x21)
- Temp sensor: warning threshold (scale as bank 0x21)
- Volt sensor: min threshold (scale as bank 0x21)
Byte 2:
Temp sensor: shutdown threshold (scale as bank 0x21)
Volt sensor: max threshold (scale as bank 0x21)
- Temp sensor: shutdown threshold (scale as bank 0x21)
- Volt sensor: max threshold (scale as bank 0x21)
Bank 0x24 PWM outputs for FAN's (R)
Bank 0x25 PWM outputs for FAN's (W)
-----------------------------------
Bank 0x24 PWM outputs for FAN's (R) and Bank 0x25 PWM outputs for FAN's (W)
---------------------------------------------------------------------------
This bank contains 3 "sensors", for each sensor it contains 5 bytes.
Sensor 0 usually controls the CPU fan
Sensor 1 usually controls the NB (or chipset for single chip) fan
Sensor 2 usually controls the System fan
Those banks contain 3 "sensors", for each sensor it contains 5 bytes.
- Sensor 0 usually controls the CPU fan
- Sensor 1 usually controls the NB (or chipset for single chip) fan
- Sensor 2 usually controls the System fan
Byte 0:
Flag 0x80 to enable control, Fan runs at 100% when disabled.
low nibble (temp)sensor address at bank 0x21 used for control.
Flag 0x80 to enable control, Fan runs at 100% when disabled.
low nibble (temp)sensor address at bank 0x21 used for control.
Byte 1:
0-255 = 0-12v (linear), specify voltage at which fan will rotate when under
low threshold temp (specified in byte 3)
0-255 = 0-12v (linear), specify voltage at which fan will rotate when under
low threshold temp (specified in byte 3)
Byte 2:
0-255 = 0-12v (linear), specify voltage at which fan will rotate when above
high threshold temp (specified in byte 4)
0-255 = 0-12v (linear), specify voltage at which fan will rotate when above
high threshold temp (specified in byte 4)
Byte 3:
Low threshold temp (scale as bank 0x21)
Low threshold temp (scale as bank 0x21)
byte 4:
High threshold temp (scale as bank 0x21)
High threshold temp (scale as bank 0x21)
Bank 0x26 Sensors Bank2 Values / Readings (R)
---------------------------------------------
This bank contains 6 sensors (AFAIK), for each sensor it contains 1 byte.
So far the following sensors are known to be available on all motherboards:
Sensor 0: CPU fan speed
Sensor 1: NB (or chipset for single chip) fan speed
Sensor 2: SYS fan speed
- Sensor 0: CPU fan speed
- Sensor 1: NB (or chipset for single chip) fan speed
- Sensor 2: SYS fan speed
Byte 0:
This byte holds the reading from the sensor. 0-255 = 0-15300 (linear)
This byte holds the reading from the sensor. 0-255 = 0-15300 (linear)
Bank 0x27 Sensors Bank2 Settings (R)
Bank 0x28 Sensors Bank2 Settings (W)
------------------------------------
Bank 0x27 Sensors Bank2 Settings (R) and Bank 0x28 Sensors Bank2 Settings (W)
-----------------------------------------------------------------------------
This bank contains 6 sensors (AFAIK), for each sensor it contains 2 bytes.
Those banks contain 6 sensors (AFAIK), for each sensor it contains 2 bytes.
Byte 0:
Alarm behaviour for the selected sensor. A 1 enables the described behaviour.
Bit 0: Give an alarm if measured rpm is under the min threshold (RW)
Bit 3: Beep if alarm (RW)
Bit 7: Shutdown if alarm persist for more than 4 seconds (RW)
Alarm behaviour for the selected sensor. A 1 enables the described behaviour.
Bit 0:
Give an alarm if measured rpm is under the min threshold (RW)
Bit 3:
Beep if alarm (RW)
Bit 7:
Shutdown if alarm persist for more than 4 seconds (RW)
Byte 1:
min threshold (scale as bank 0x26)
min threshold (scale as bank 0x26)
Warning for the adventurous
......
Documentation/hwmon/abituguru → Documentation/hwmon/abituguru.rst
View file @ 7aefd944
......@@ -2,27 +2,34 @@ Kernel driver abituguru
=======================
Supported chips:
* Abit uGuru revision 1 & 2 (Hardware Monitor part only)
Prefix: 'abituguru'
Addresses scanned: ISA 0x0E0
Datasheet: Not available, this driver is based on reverse engineering.
A "Datasheet" has been written based on the reverse engineering it
should be available in the same dir as this file under the name
abituguru-datasheet.
Note:
The uGuru is a microcontroller with onboard firmware which programs
it to behave as a hwmon IC. There are many different revisions of the
firmware and thus effectivly many different revisions of the uGuru.
Below is an incomplete list with which revisions are used for which
Motherboards:
uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) (1)
uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
AW9D-MAX) (2)
1) For revisions 2 and 3 uGuru's the driver can autodetect the
- uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) [1]_
- uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
- uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
- uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
- uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
- uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
AW9D-MAX) [2]_
.. [1] For revisions 2 and 3 uGuru's the driver can autodetect the
sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
this does not always work. For these uGuru's the autodetection can
be overridden with the bank1_types module param. For all 3 known
......@@ -30,41 +37,50 @@ Supported chips:
bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
You may also need to specify the fan_sensors option for these boards
fan_sensors=5
2) There is a separate abituguru3 driver for these motherboards,
.. [2] There is a separate abituguru3 driver for these motherboards,
the abituguru (without the 3 !) driver will not work on these
motherboards (and visa versa)!
Authors:
Hans de Goede <j.w.r.degoede@hhs.nl>,
(Initial reverse engineering done by Olle Sandberg
- Hans de Goede <j.w.r.degoede@hhs.nl>,
- (Initial reverse engineering done by Olle Sandberg
<ollebull@gmail.com>)
Module Parameters
-----------------
* force: bool Force detection. Note this parameter only causes the
* force: bool
Force detection. Note this parameter only causes the
detection to be skipped, and thus the insmod to
succeed. If the uGuru can't be read the actual hwmon
driver will not load and thus no hwmon device will get
registered.
* bank1_types: int[] Bank1 sensortype autodetection override:
-1 autodetect (default)
0 volt sensor
1 temp sensor
2 not connected
* fan_sensors: int Tell the driver how many fan speed sensors there are
* bank1_types: int[]
Bank1 sensortype autodetection override:
* -1 autodetect (default)
* 0 volt sensor
* 1 temp sensor
* 2 not connected
* fan_sensors: int
Tell the driver how many fan speed sensors there are
on your motherboard. Default: 0 (autodetect).
* pwms: int Tell the driver how many fan speed controls (fan
* pwms: int
Tell the driver how many fan speed controls (fan
pwms) your motherboard has. Default: 0 (autodetect).
* verbose: int How verbose should the driver be? (0-3):
0 normal output
1 + verbose error reporting
2 + sensors type probing info (default)
3 + retryable error reporting
* verbose: int
How verbose should the driver be? (0-3):
* 0 normal output
* 1 + verbose error reporting
* 2 + sensors type probing info (default)
* 3 + retryable error reporting
Default: 2 (the driver is still in the testing phase)
Notice if you need any of the first three options above please insmod the
Notice: if you need any of the first three options above please insmod the
driver with verbose set to 3 and mail me <j.w.r.degoede@hhs.nl> the output of:
dmesg | grep abituguru
......@@ -90,3 +106,8 @@ Known Issues
------------
The voltage and frequency control parts of the Abit uGuru are not supported.
.. toctree::
:maxdepth: 1
abituguru-datasheet.rst
Documentation/hwmon/abituguru3 → Documentation/hwmon/abituguru3.rst
View file @ 7aefd944
......@@ -3,41 +3,51 @@ Kernel driver abituguru3
Supported chips:
* Abit uGuru revision 3 (Hardware Monitor part, reading only)
Prefix: 'abituguru3'
Addresses scanned: ISA 0x0E0
Datasheet: Not available, this driver is based on reverse engineering.
Note:
The uGuru is a microcontroller with onboard firmware which programs
it to behave as a hwmon IC. There are many different revisions of the
firmware and thus effectivly many different revisions of the uGuru.
Below is an incomplete list with which revisions are used for which
Motherboards:
uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7)
uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
- uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7)
- uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
- uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
- uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
- uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
AW9D-MAX)
The abituguru3 driver is only for revison 3.0.x.x motherboards,
this driver will not work on older motherboards. For older
motherboards use the abituguru (without the 3 !) driver.
Authors:
Hans de Goede <j.w.r.degoede@hhs.nl>,
(Initial reverse engineering done by Louis Kruger)
- Hans de Goede <j.w.r.degoede@hhs.nl>,
- (Initial reverse engineering done by Louis Kruger)
Module Parameters
-----------------
* force: bool Force detection. Note this parameter only causes the
* force: bool
Force detection. Note this parameter only causes the
detection to be skipped, and thus the insmod to
succeed. If the uGuru can't be read the actual hwmon
driver will not load and thus no hwmon device will get
registered.
* verbose: bool Should the driver be verbose?
0/off/false normal output
1/on/true + verbose error reporting (default)
* verbose: bool
Should the driver be verbose?
* 0/off/false normal output
* 1/on/true + verbose error reporting (default)
Default: 1 (the driver is still in the testing phase)
Description
......@@ -62,4 +72,4 @@ neither is writing any of the sensor settings and writing / reading the
fanspeed control registers (FanEQ)
If you encounter any problems please mail me <j.w.r.degoede@hhs.nl> and
include the output of: "dmesg | grep abituguru"
include the output of: `dmesg | grep abituguru`
Documentation/hwmon/abx500 → Documentation/hwmon/abx500.rst
View file @ 7aefd944
......@@ -2,9 +2,13 @@ Kernel driver abx500
====================
Supported chips:
* ST-Ericsson ABx500 series
Prefix: 'abx500'
Addresses scanned: -
Datasheet: http://www.stericsson.com/developers/documentation.jsp
Authors:
......
Documentation/hwmon/acpi_power_meter → Documentation/hwmon/acpi_power_meter.rst
View file @ 7aefd944
......@@ -4,8 +4,11 @@ Kernel driver power_meter
This driver talks to ACPI 4.0 power meters.
Supported systems:
* Any recent system with ACPI 4.0.
Prefix: 'power_meter'
Datasheet: http://acpi.info/, section 10.4.
Author: Darrick J. Wong
......@@ -18,26 +21,26 @@ the ACPI 4.0 spec (Chapter 10.4). These devices have a simple set of
features--a power meter that returns average power use over a configurable
interval, an optional capping mechanism, and a couple of trip points. The
sysfs interface conforms with the specification outlined in the "Power" section
of Documentation/hwmon/sysfs-interface.
of Documentation/hwmon/sysfs-interface.rst.
Special Features
----------------
The power[1-*]_is_battery knob indicates if the power supply is a battery.
Both power[1-*]_average_{min,max} must be set before the trip points will work.
The `power[1-*]_is_battery` knob indicates if the power supply is a battery.
Both `power[1-*]_average_{min,max}` must be set before the trip points will work.
When both of them are set, an ACPI event will be broadcast on the ACPI netlink
socket and a poll notification will be sent to the appropriate
power[1-*]_average sysfs file.
`power[1-*]_average` sysfs file.
The power[1-*]_{model_number, serial_number, oem_info} fields display arbitrary
strings that ACPI provides with the meter. The measures/ directory contains
symlinks to the devices that this meter measures.
The `power[1-*]_{model_number, serial_number, oem_info}` fields display
arbitrary strings that ACPI provides with the meter. The measures/ directory
contains symlinks to the devices that this meter measures.
Some computers have the ability to enforce a power cap in hardware. If this is
the case, the power[1-*]_cap and related sysfs files will appear. When the
the case, the `power[1-*]_cap` and related sysfs files will appear. When the
average power consumption exceeds the cap, an ACPI event will be broadcast on
the netlink event socket and a poll notification will be sent to the
appropriate power[1-*]_alarm file to indicate that capping has begun, and the
appropriate `power[1-*]_alarm` file to indicate that capping has begun, and the
hardware has taken action to reduce power consumption. Most likely this will
result in reduced performance.
......@@ -46,6 +49,6 @@ all cases the ACPI event will be broadcast on the ACPI netlink event socket as
well as sent as a poll notification to a sysfs file. The events are as
follows:
power[1-*]_cap will be notified if the firmware changes the power cap.
power[1-*]_interval will be notified if the firmware changes the averaging
`power[1-*]_cap` will be notified if the firmware changes the power cap.
`power[1-*]_interval` will be notified if the firmware changes the averaging
interval.
Documentation/hwmon/ad7314 → Documentation/hwmon/ad7314.rst
View file @ 7aefd944
......@@ -2,14 +2,23 @@ Kernel driver ad7314
====================
Supported chips:
* Analog Devices AD7314
Prefix: 'ad7314'
Datasheet: Publicly available at Analog Devices website.
* Analog Devices ADT7301
Prefix: 'adt7301'
Datasheet: Publicly available at Analog Devices website.
* Analog Devices ADT7302
Prefix: 'adt7302'
Datasheet: Publicly available at Analog Devices website.
Description
......
Documentation/hwmon/adc128d818 → Documentation/hwmon/adc128d818.rst
View file @ 7aefd944
......@@ -2,11 +2,14 @@ Kernel driver adc128d818
========================
Supported chips:
* Texas Instruments ADC818D818
Prefix: 'adc818d818'
Addresses scanned: I2C 0x1d, 0x1e, 0x1f, 0x2d, 0x2e, 0x2f
Datasheet: Publicly available at the TI website
http://www.ti.com/
Datasheet: Publicly available at the TI website http://www.ti.com/
Author: Guenter Roeck
......
Documentation/hwmon/adm1021 → Documentation/hwmon/adm1021.rst
View file @ 7aefd944
......@@ -2,51 +2,91 @@ Kernel driver adm1021
=====================
Supported chips:
* Analog Devices ADM1021
Prefix: 'adm1021'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Analog Devices website
* Analog Devices ADM1021A/ADM1023
Prefix: 'adm1023'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Analog Devices website
* Genesys Logic GL523SM
Prefix: 'gl523sm'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet:
* Maxim MAX1617
Prefix: 'max1617'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Maxim website
* Maxim MAX1617A
Prefix: 'max1617a'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Maxim website
* National Semiconductor LM84
Prefix: 'lm84'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the National Semiconductor website
* Philips NE1617
Prefix: 'max1617' (probably detected as a max1617)
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Philips website
* Philips NE1617A
Prefix: 'max1617' (probably detected as a max1617)
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Philips website
* TI THMC10
Prefix: 'thmc10'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the TI website
* Onsemi MC1066
Prefix: 'mc1066'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the Onsemi website
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>
Module Parameters
-----------------
......
Documentation/hwmon/adm1025 → Documentation/hwmon/adm1025.rst
View file @ 7aefd944
......@@ -2,23 +2,32 @@ Kernel driver adm1025
=====================
Supported chips:
* Analog Devices ADM1025, ADM1025A
Prefix: 'adm1025'
Addresses scanned: I2C 0x2c - 0x2e
Datasheet: Publicly available at the Analog Devices website
* Philips NE1619
Prefix: 'ne1619'
Addresses scanned: I2C 0x2c - 0x2d
Datasheet: Publicly available at the Philips website
The NE1619 presents some differences with the original ADM1025:
* Only two possible addresses (0x2c - 0x2d).
* No temperature offset register, but we don't use it anyway.
* No INT mode for pin 16. We don't play with it anyway.
Authors:
Chen-Yuan Wu <gwu@esoft.com>,
Jean Delvare <jdelvare@suse.de>
- Chen-Yuan Wu <gwu@esoft.com>,
- Jean Delvare <jdelvare@suse.de>
Description
-----------
......
Documentation/hwmon/adm1026 → Documentation/hwmon/adm1026.rst
View file @ 7aefd944
......@@ -3,26 +3,34 @@ Kernel driver adm1026
Supported chips:
* Analog Devices ADM1026
Prefix: 'adm1026'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: Publicly available at the Analog Devices website
http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026
Authors:
Philip Pokorny <ppokorny@penguincomputing.com> for Penguin Computing
Justin Thiessen <jthiessen@penguincomputing.com>
- Philip Pokorny <ppokorny@penguincomputing.com> for Penguin Computing
- Justin Thiessen <jthiessen@penguincomputing.com>
Module Parameters
-----------------
* gpio_input: int array (min = 1, max = 17)
List of GPIO pins (0-16) to program as inputs
* gpio_output: int array (min = 1, max = 17)
List of GPIO pins (0-16) to program as outputs
* gpio_inverted: int array (min = 1, max = 17)
List of GPIO pins (0-16) to program as inverted
* gpio_normal: int array (min = 1, max = 17)
List of GPIO pins (0-16) to program as normal/non-inverted
* gpio_fan: int array (min = 1, max = 8)
List of GPIO pins (0-7) to program as fan tachs
......
Documentation/hwmon/adm1031 → Documentation/hwmon/adm1031.rst
View file @ 7aefd944
......@@ -3,20 +3,28 @@ Kernel driver adm1031
Supported chips:
* Analog Devices ADM1030
Prefix: 'adm1030'
Addresses scanned: I2C 0x2c to 0x2e
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/en/prod/0%2C2877%2CADM1030%2C00.html
* Analog Devices ADM1031
Prefix: 'adm1031'
Addresses scanned: I2C 0x2c to 0x2e
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/en/prod/0%2C2877%2CADM1031%2C00.html
Authors:
Alexandre d'Alton <alex@alexdalton.org>
Jean Delvare <jdelvare@suse.de>
- Alexandre d'Alton <alex@alexdalton.org>
- Jean Delvare <jdelvare@suse.de>
Description
-----------
......
Documentation/hwmon/adm1275 → Documentation/hwmon/adm1275.rst
View file @ 7aefd944
......@@ -2,29 +2,53 @@ Kernel driver adm1275
=====================
Supported chips:
* Analog Devices ADM1075
Prefix: 'adm1075'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
* Analog Devices ADM1272
Prefix: 'adm1272'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf
* Analog Devices ADM1275
Prefix: 'adm1275'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf
* Analog Devices ADM1276
Prefix: 'adm1276'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
* Analog Devices ADM1278
Prefix: 'adm1278'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
* Analog Devices ADM1293/ADM1294
Prefix: 'adm1293', 'adm1294'
Addresses scanned: -
Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
Author: Guenter Roeck <linux@roeck-us.net>
......@@ -44,7 +68,7 @@ integrated 12 bit analog-to-digital converter (ADC), accessed using a
PMBus interface.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
Usage Notes
......@@ -66,7 +90,7 @@ Platform data support
---------------------
The driver supports standard PMBus driver platform data. Please see
Documentation/hwmon/pmbus for details.
Documentation/hwmon/pmbus.rst for details.
Sysfs entries
......@@ -75,6 +99,7 @@ Sysfs entries
The following attributes are supported. Limits are read-write, history reset
attributes are write-only, all other attributes are read-only.
======================= =======================================================
inX_label "vin1" or "vout1" depending on chip variant and
configuration. On ADM1075, ADM1293, and ADM1294,
vout1 reports the voltage on the VAUX pin.
......@@ -120,3 +145,4 @@ temp1_reset_history Write any value to reset history.
Temperature attributes are supported on ADM1272 and
ADM1278.
======================= =======================================================
Documentation/hwmon/adm9240 → Documentation/hwmon/adm9240.rst
View file @ 7aefd944
......@@ -2,29 +2,42 @@ Kernel driver adm9240
=====================
Supported chips:
* Analog Devices ADM9240
Prefix: 'adm9240'
Addresses scanned: I2C 0x2c - 0x2f
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/UploadedFiles/Data_Sheets/79857778ADM9240_0.pdf
* Dallas Semiconductor DS1780
Prefix: 'ds1780'
Addresses scanned: I2C 0x2c - 0x2f
Datasheet: Publicly available at the Dallas Semiconductor (Maxim) website
http://pdfserv.maxim-ic.com/en/ds/DS1780.pdf
* National Semiconductor LM81
Prefix: 'lm81'
Addresses scanned: I2C 0x2c - 0x2f
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/ds.cgi/LM/LM81.pdf
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Michiel Rook <michiel@grendelproject.nl>,
Grant Coady <gcoady.lk@gmail.com> with guidance
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Michiel Rook <michiel@grendelproject.nl>,
- Grant Coady <gcoady.lk@gmail.com> with guidance
from Jean Delvare <jdelvare@suse.de>
Interface
......@@ -87,11 +100,13 @@ rpm = (22500 * 60) / (count * divider)
Automatic fan clock divider
* User sets 0 to fan_min limit
- low speed alarm is disabled
- fan clock divider not changed
- auto fan clock adjuster enabled for valid fan speed reading
* User sets fan_min limit too low
- low speed alarm is enabled
- fan clock divider set to max
- fan_min set to register value 254 which corresponds
......@@ -101,11 +116,13 @@ Automatic fan clock divider
- auto fan clock adjuster disabled
* User sets reasonable fan speed
- low speed alarm is enabled
- fan clock divider set to suit fan_min
- auto fan clock adjuster enabled: adjusts fan_min
* User sets unreasonably high low fan speed limit
- resolution of the low speed limit may be reduced
- alarm will be asserted
- auto fan clock adjuster enabled: adjusts fan_min
......@@ -122,16 +139,21 @@ power up or reset. This doesn't do much on the test Intel SE440BX-2.
Voltage Monitor
^^^^^^^^^^^^^^^
Voltage (IN) measurement is internally scaled:
=== =========== =========== ========= ==========
nr label nominal maximum resolution
mV mV mV
=== =========== =========== ========= ==========
0 +2.5V 2500 3320 13.0
1 Vccp1 2700 3600 14.1
2 +3.3V 3300 4380 17.2
3 +5V 5000 6640 26.0
4 +12V 12000 15940 62.5
5 Vccp2 2700 3600 14.1
=== =========== =========== ========= ==========
The reading is an unsigned 8-bit value, nominal voltage measurement is
represented by a reading of 192, being 3/4 of the measurement range.
......@@ -159,8 +181,9 @@ Clear the CI latch by writing value 0 to the sysfs intrusion0_alarm file.
Alarm flags reported as 16-bit word
=== ============= ==========================
bit label comment
--- ------------- --------------------------
=== ============= ==========================
0 +2.5 V_Error high or low limit exceeded
1 VCCP_Error high or low limit exceeded
2 +3.3 V_Error high or low limit exceeded
......@@ -171,6 +194,7 @@ Alarm flags reported as 16-bit word
8 +12 V_Error high or low limit exceeded
9 VCCP2_Error high or low limit exceeded
12 Chassis_Error CI pin went high
=== ============= ==========================
Remaining bits are reserved and thus undefined. It is important to note
that alarm bits may be cleared on read, user-space may latch alarms and
......
Documentation/hwmon/ads1015 → Documentation/hwmon/ads1015.rst
View file @ 7aefd944
......@@ -2,13 +2,21 @@ Kernel driver ads1015
=====================
Supported chips:
* Texas Instruments ADS1015
Prefix: 'ads1015'
Datasheet: Publicly available at the Texas Instruments website :
Datasheet: Publicly available at the Texas Instruments website:
http://focus.ti.com/lit/ds/symlink/ads1015.pdf
* Texas Instruments ADS1115
Prefix: 'ads1115'
Datasheet: Publicly available at the Texas Instruments website :
Datasheet: Publicly available at the Texas Instruments website:
http://focus.ti.com/lit/ds/symlink/ads1115.pdf
Authors:
......@@ -24,14 +32,15 @@ This device is a 12/16-bit A-D converter with 4 inputs.
The inputs can be used single ended or in certain differential combinations.
The inputs can be made available by 8 sysfs input files in0_input - in7_input:
in0: Voltage over AIN0 and AIN1.
in1: Voltage over AIN0 and AIN3.
in2: Voltage over AIN1 and AIN3.
in3: Voltage over AIN2 and AIN3.
in4: Voltage over AIN0 and GND.
in5: Voltage over AIN1 and GND.
in6: Voltage over AIN2 and GND.
in7: Voltage over AIN3 and GND.
- in0: Voltage over AIN0 and AIN1.
- in1: Voltage over AIN0 and AIN3.
- in2: Voltage over AIN1 and AIN3.
- in3: Voltage over AIN2 and AIN3.
- in4: Voltage over AIN0 and GND.
- in5: Voltage over AIN1 and GND.
- in6: Voltage over AIN2 and GND.
- in7: Voltage over AIN3 and GND.
Which inputs are available can be configured using platform data or devicetree.
......@@ -42,29 +51,34 @@ Platform Data
In linux/platform_data/ads1015.h platform data is defined, channel_data contains
configuration data for the used input combinations:
- pga is the programmable gain amplifier (values are full scale)
0: +/- 6.144 V
1: +/- 4.096 V
2: +/- 2.048 V
3: +/- 1.024 V
4: +/- 0.512 V
5: +/- 0.256 V
- 0: +/- 6.144 V
- 1: +/- 4.096 V
- 2: +/- 2.048 V
- 3: +/- 1.024 V
- 4: +/- 0.512 V
- 5: +/- 0.256 V
- data_rate in samples per second
0: 128
1: 250
2: 490
3: 920
4: 1600
5: 2400
6: 3300
Example:
struct ads1015_platform_data data = {
- 0: 128
- 1: 250
- 2: 490
- 3: 920
- 4: 1600
- 5: 2400
- 6: 3300
Example::
struct ads1015_platform_data data = {
.channel_data = {
[2] = { .enabled = true, .pga = 1, .data_rate = 0 },
[4] = { .enabled = true, .pga = 4, .data_rate = 5 },
}
};
};
In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input
(FS +/- 0.512 V, 2400 SPS) would be created.
......
Documentation/hwmon/ads7828 → Documentation/hwmon/ads7828.rst
View file @ 7aefd944
......@@ -2,20 +2,27 @@ Kernel driver ads7828
=====================
Supported chips:
* Texas Instruments/Burr-Brown ADS7828
Prefix: 'ads7828'
Datasheet: Publicly available at the Texas Instruments website:
http://focus.ti.com/lit/ds/symlink/ads7828.pdf
* Texas Instruments ADS7830
Prefix: 'ads7830'
Datasheet: Publicly available at the Texas Instruments website:
http://focus.ti.com/lit/ds/symlink/ads7830.pdf
Authors:
Steve Hardy <shardy@redhat.com>
Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Guillaume Roguez <guillaume.roguez@savoirfairelinux.com>
- Steve Hardy <shardy@redhat.com>
- Vivien Didelot <vivien.didelot@savoirfairelinux.com>
- Guillaume Roguez <guillaume.roguez@savoirfairelinux.com>
Platform data
-------------
......
Documentation/hwmon/adt7410 → Documentation/hwmon/adt7410.rst
View file @ 7aefd944
......@@ -2,25 +2,44 @@ Kernel driver adt7410
=====================
Supported chips:
* Analog Devices ADT7410
Prefix: 'adt7410'
Addresses scanned: None
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/static/imported-files/data_sheets/ADT7410.pdf
* Analog Devices ADT7420
Prefix: 'adt7420'
Addresses scanned: None
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/static/imported-files/data_sheets/ADT7420.pdf
* Analog Devices ADT7310
Prefix: 'adt7310'
Addresses scanned: None
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/static/imported-files/data_sheets/ADT7310.pdf
* Analog Devices ADT7320
Prefix: 'adt7320'
Addresses scanned: None
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/static/imported-files/data_sheets/ADT7320.pdf
Author: Hartmut Knaack <knaack.h@gmx.de>
......@@ -61,13 +80,15 @@ The device is set to 16 bit resolution and comparator mode.
sysfs-Interface
---------------
temp#_input - temperature input
temp#_min - temperature minimum setpoint
temp#_max - temperature maximum setpoint
temp#_crit - critical temperature setpoint
temp#_min_hyst - hysteresis for temperature minimum (read-only)
temp#_max_hyst - hysteresis for temperature maximum (read/write)
temp#_crit_hyst - hysteresis for critical temperature (read-only)
temp#_min_alarm - temperature minimum alarm flag
temp#_max_alarm - temperature maximum alarm flag
temp#_crit_alarm - critical temperature alarm flag
======================== ====================================================
temp#_input temperature input
temp#_min temperature minimum setpoint
temp#_max temperature maximum setpoint
temp#_crit critical temperature setpoint
temp#_min_hyst hysteresis for temperature minimum (read-only)
temp#_max_hyst hysteresis for temperature maximum (read/write)
temp#_crit_hyst hysteresis for critical temperature (read-only)
temp#_min_alarm temperature minimum alarm flag
temp#_max_alarm temperature maximum alarm flag
temp#_crit_alarm critical temperature alarm flag
======================== ====================================================
Documentation/hwmon/adt7411 → Documentation/hwmon/adt7411.rst
View file @ 7aefd944
......@@ -2,9 +2,13 @@ Kernel driver adt7411
=====================
Supported chips:
* Analog Devices ADT7411
Prefix: 'adt7411'
Addresses scanned: 0x48, 0x4a, 0x4b
Datasheet: Publicly available at the Analog Devices website
Author: Wolfram Sang (based on adt7470 by Darrick J. Wong)
......@@ -26,15 +30,19 @@ Check the datasheet for details.
sysfs-Interface
---------------
in0_input - vdd voltage input
in[1-8]_input - analog 1-8 input
temp1_input - temperature input
================ =================
in0_input vdd voltage input
in[1-8]_input analog 1-8 input
temp1_input temperature input
================ =================
Besides standard interfaces, this driver adds (0 = off, 1 = on):
adc_ref_vdd - Use vdd as reference instead of 2.25 V
fast_sampling - Sample at 22.5 kHz instead of 1.4 kHz, but drop filters
no_average - Turn off averaging over 16 samples
============== =======================================================
adc_ref_vdd Use vdd as reference instead of 2.25 V
fast_sampling Sample at 22.5 kHz instead of 1.4 kHz, but drop filters
no_average Turn off averaging over 16 samples
============== =======================================================
Notes
-----
......
Documentation/hwmon/adt7462 → Documentation/hwmon/adt7462.rst
View file @ 7aefd944
Kernel driver adt7462
======================
=====================
Supported chips:
* Analog Devices ADT7462
Prefix: 'adt7462'
Addresses scanned: I2C 0x58, 0x5C
Datasheet: Publicly available at the Analog Devices website
Author: Darrick J. Wong
......@@ -57,11 +61,10 @@ Besides standard interfaces driver adds the following:
* pwm#_auto_point1_pwm and temp#_auto_point1_temp and
* pwm#_auto_point2_pwm and temp#_auto_point2_temp -
point1: Set the pwm speed at a lower temperature bound.
point2: Set the pwm speed at a higher temperature bound.
- point1: Set the pwm speed at a lower temperature bound.
- point2: Set the pwm speed at a higher temperature bound.
The ADT7462 will scale the pwm between the lower and higher pwm speed when
the temperature is between the two temperature boundaries. PWM values range
from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the
temperature sensor associated with the PWM control exceeds temp#_max.
Documentation/hwmon/adt7470 → Documentation/hwmon/adt7470.rst
View file @ 7aefd944
......@@ -2,9 +2,13 @@ Kernel driver adt7470
=====================
Supported chips:
* Analog Devices ADT7470
Prefix: 'adt7470'
Addresses scanned: I2C 0x2C, 0x2E, 0x2F
Datasheet: Publicly available at the Analog Devices website
Author: Darrick J. Wong
......@@ -56,8 +60,8 @@ Besides standard interfaces driver adds the following:
* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and
* pwm#_auto_point2_pwm and pwm#_auto_point2_temp -
point1: Set the pwm speed at a lower temperature bound.
point2: Set the pwm speed at a higher temperature bound.
- point1: Set the pwm speed at a lower temperature bound.
- point2: Set the pwm speed at a higher temperature bound.
The ADT7470 will scale the pwm between the lower and higher pwm speed when
the temperature is between the two temperature boundaries. PWM values range
......
Documentation/hwmon/adt7475 → Documentation/hwmon/adt7475.rst
View file @ 7aefd944
......@@ -2,28 +2,44 @@ Kernel driver adt7475
=====================
Supported chips:
* Analog Devices ADT7473
Prefix: 'adt7473'
Addresses scanned: I2C 0x2C, 0x2D, 0x2E
Datasheet: Publicly available at the On Semiconductors website
* Analog Devices ADT7475
Prefix: 'adt7475'
Addresses scanned: I2C 0x2E
Datasheet: Publicly available at the On Semiconductors website
* Analog Devices ADT7476
Prefix: 'adt7476'
Addresses scanned: I2C 0x2C, 0x2D, 0x2E
Datasheet: Publicly available at the On Semiconductors website
* Analog Devices ADT7490
Prefix: 'adt7490'
Addresses scanned: I2C 0x2C, 0x2D, 0x2E
Datasheet: Publicly available at the On Semiconductors website
Authors:
Jordan Crouse
Hans de Goede
Darrick J. Wong (documentation)
Jean Delvare
- Jordan Crouse
- Hans de Goede
- Darrick J. Wong (documentation)
- Jean Delvare
Description
......@@ -82,14 +98,16 @@ ADT7490:
Sysfs Mapping
-------------
ADT7490 ADT7476 ADT7475 ADT7473
------- ------- ------- -------
==== =========== =========== ========= ==========
in ADT7490 ADT7476 ADT7475 ADT7473
==== =========== =========== ========= ==========
in0 2.5VIN (22) 2.5VIN (22) - -
in1 VCCP (23) VCCP (23) VCCP (14) VCCP (14)
in2 VCC (4) VCC (4) VCC (4) VCC (3)
in3 5VIN (20) 5VIN (20)
in4 12VIN (21) 12VIN (21)
in5 VTT (8)
==== =========== =========== ========= ==========
Special Features
----------------
......@@ -107,8 +125,8 @@ Fan Speed Control
The driver exposes two trip points per PWM channel.
point1: Set the PWM speed at the lower temperature bound
point2: Set the PWM speed at the higher temperature bound
- point1: Set the PWM speed at the lower temperature bound
- point2: Set the PWM speed at the higher temperature bound
The ADT747x will scale the PWM linearly between the lower and higher PWM
speed when the temperature is between the two temperature boundaries.
......@@ -123,12 +141,12 @@ the PWM control exceeds temp#_max.
At Tmin - hysteresis the PWM output can either be off (0% duty cycle) or at the
minimum (i.e. auto_point1_pwm). This behaviour can be configured using the
pwm[1-*]_stall_disable sysfs attribute. A value of 0 means the fans will shut
`pwm[1-*]_stall_disable sysfs attribute`. A value of 0 means the fans will shut
off. A value of 1 means the fans will run at auto_point1_pwm.
The responsiveness of the ADT747x to temperature changes can be configured.
This allows smoothing of the fan speed transition. To set the transition time
set the value in ms in the temp[1-*]_smoothing sysfs attribute.
set the value in ms in the `temp[1-*]_smoothing` sysfs attribute.
Notes
-----
......
Documentation/hwmon/amc6821 → Documentation/hwmon/amc6821.rst
View file @ 7aefd944
......@@ -2,9 +2,13 @@ Kernel driver amc6821
=====================
Supported chips:
Texas Instruments AMC6821
Prefix: 'amc6821'
Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e
Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html
Authors:
......@@ -21,6 +25,7 @@ The pwm can be controlled either from software or automatically.
The driver provides the following sensor accesses in sysfs:
======================= == ===============================================
temp1_input ro on-chip temperature
temp1_min rw "
temp1_max rw "
......@@ -87,6 +92,7 @@ temp2_auto_point3_temp rw Above this temperature fan runs at maximum
values which depend on temp2_auto_point2_temp
and pwm1_auto_point2_pwm. Read it out after
writing to get actual value.
======================= == ===============================================
Module parameters
......@@ -97,6 +103,6 @@ load the module with: init=0.
If your board BIOS doesn't initialize the chip, or you want
different settings, you can set the following parameters:
init=1,
pwminv: 0 default pwm output, 1 inverts pwm output.
- init=1,
- pwminv: 0 default pwm output, 1 inverts pwm output.
Documentation/hwmon/asb100 → Documentation/hwmon/asb100.rst
View file @ 7aefd944
......@@ -2,9 +2,13 @@ Kernel driver asb100
====================
Supported Chips:
* Asus ASB100 and ASB100-A "Bach"
Prefix: 'asb100'
Addresses scanned: I2C 0x2d
Datasheet: none released
Author: Mark M. Hoffman <mhoffman@lightlink.com>
......@@ -41,32 +45,29 @@ processor itself. It is a value in volts.
Alarms: (TODO question marks indicate may or may not work)
0x0001 => in0 (?)
0x0002 => in1 (?)
0x0004 => in2
0x0008 => in3
0x0010 => temp1 (1)
0x0020 => temp2
0x0040 => fan1
0x0080 => fan2
0x0100 => in4
0x0200 => in5 (?) (2)
0x0400 => in6 (?) (2)
0x0800 => fan3
0x1000 => chassis switch
0x2000 => temp3
Alarm Notes:
(1) This alarm will only trigger if the hysteresis value is 127C.
I.e. it behaves the same as w83781d.
(2) The min and max registers for these values appear to
be read-only or otherwise stuck at 0x00.
- 0x0001 => in0 (?)
- 0x0002 => in1 (?)
- 0x0004 => in2
- 0x0008 => in3
- 0x0010 => temp1 [1]_
- 0x0020 => temp2
- 0x0040 => fan1
- 0x0080 => fan2
- 0x0100 => in4
- 0x0200 => in5 (?) [2]_
- 0x0400 => in6 (?) [2]_
- 0x0800 => fan3
- 0x1000 => chassis switch
- 0x2000 => temp3
.. [1] This alarm will only trigger if the hysteresis value is 127C.
I.e. it behaves the same as w83781d.
.. [2] The min and max registers for these values appear to
be read-only or otherwise stuck at 0x00.
TODO:
* Experiment with fan divisors > 8.
* Experiment with temp. sensor types.
* Are there really 13 voltage inputs? Probably not...
* Cleanups, no doubt...
* Experiment with fan divisors > 8.
* Experiment with temp. sensor types.
* Are there really 13 voltage inputs? Probably not...
* Cleanups, no doubt...
Documentation/hwmon/asc7621 → Documentation/hwmon/asc7621.rst
View file @ 7aefd944
=====================
Kernel driver asc7621
==================
=====================
Supported chips:
Andigilog aSC7621 and aSC7621a
Prefix: 'asc7621'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: http://www.fairview5.com/linux/asc7621/asc7621.pdf
Author:
......@@ -73,8 +78,10 @@ Finally, we have added a tach disable function that turns off the tach
measurement system for individual tachs in order to save power. That is
in register 75h.
--
--------------------------------------------------------------------------
aSC7621 Product Description
===========================
The aSC7621 has a two wire digital interface compatible with SMBus 2.0.
Using a 10-bit ADC, the aSC7621 measures the temperature of two remote diode
......@@ -102,6 +109,8 @@ System voltages of VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard power are
monitored efficiently with internal scaling resistors.
Features
--------
- Supports PECI interface and monitors internal and remote thermal diodes
- 2-wire, SMBus 2.0 compliant, serial interface
- 10-bit ADC
......@@ -123,6 +132,7 @@ Except where noted below, the sysfs entries created by this driver follow
the standards defined in "sysfs-interface".
temp1_source
= ===============================================
0 (default) peci_legacy = 0, Remote 1 Temperature
peci_legacy = 1, PECI Processor Temperature 0
1 Remote 1 Temperature
......@@ -132,8 +142,10 @@ temp1_source
5 PECI Processor Temperature 1
6 PECI Processor Temperature 2
7 PECI Processor Temperature 3
= ===============================================
temp2_source
= ===============================================
0 (default) Internal Temperature
1 Remote 1 Temperature
2 Remote 2 Temperature
......@@ -142,8 +154,10 @@ temp2_source
5 PECI Processor Temperature 1
6 PECI Processor Temperature 2
7 PECI Processor Temperature 3
= ===============================================
temp3_source
= ===============================================
0 (default) Remote 2 Temperature
1 Remote 1 Temperature
2 Remote 2 Temperature
......@@ -152,8 +166,10 @@ temp3_source
5 PECI Processor Temperature 1
6 PECI Processor Temperature 2
7 PECI Processor Temperature 3
= ===============================================
temp4_source
= ===============================================
0 (default) peci_legacy = 0, PECI Processor Temperature 0
peci_legacy = 1, Remote 1 Temperature
1 Remote 1 Temperature
......@@ -163,58 +179,65 @@ temp4_source
5 PECI Processor Temperature 1
6 PECI Processor Temperature 2
7 PECI Processor Temperature 3
= ===============================================
temp[1-4]_smoothing_enable
temp[1-4]_smoothing_time
temp[1-4]_smoothing_enable / temp[1-4]_smoothing_time
Smooths spikes in temp readings caused by noise.
Valid values in milliseconds are:
35000
17600
11800
7000
4400
3000
1600
800
* 35000
* 17600
* 11800
* 7000
* 4400
* 3000
* 1600
* 800
temp[1-4]_crit
When the corresponding zone temperature reaches this value,
ALL pwm outputs will got to 100%.
temp[5-8]_input
temp[5-8]_enable
temp[5-8]_input / temp[5-8]_enable
The aSC7621 can also read temperatures provided by the processor
via the PECI bus. Usually these are "core" temps and are relative
to the point where the automatic thermal control circuit starts
throttling. This means that these are usually negative numbers.
pwm[1-3]_enable
=============== ========================================================
0 Fan off.
1 Fan on manual control.
2 Fan on automatic control and will run at the minimum pwm
if the temperature for the zone is below the minimum.
3 Fan on automatic control but will be off if the temperature
for the zone is below the minimum.
3 Fan on automatic control but will be off if the
temperature for the zone is below the minimum.
4-254 Ignored.
255 Fan on full.
=============== ========================================================
pwm[1-3]_auto_channels
Bitmap as described in sysctl-interface with the following
exceptions...
Only the following combination of zones (and their corresponding masks)
are valid:
1
2
3
2,3
1,2,3
4
1,2,3,4
Special values:
* 1
* 2
* 3
* 2,3
* 1,2,3
* 4
* 1,2,3,4
* Special values:
== ======================
0 Disabled.
16 Fan on manual control.
31 Fan on full.
== ======================
pwm[1-3]_invert
......@@ -226,22 +249,22 @@ pwm[1-3]_freq
PWM frequency in Hz
Valid values in Hz are:
10
15
23
30 (default)
38
47
62
94
23000
24000
25000
26000
27000
28000
29000
30000
* 10
* 15
* 23
* 30 (default)
* 38
* 47
* 62
* 94
* 23000
* 24000
* 25000
* 26000
* 27000
* 28000
* 29000
* 30000
Setting any other value will be ignored.
......@@ -251,17 +274,17 @@ peci_enable
peci_avg
Input filter average time.
0 0 Sec. (no Smoothing) (default)
1 0.25 Sec.
2 0.5 Sec.
3 1.0 Sec.
4 2.0 Sec.
5 4.0 Sec.
6 8.0 Sec.
7 0.0 Sec.
* 0 0 Sec. (no Smoothing) (default)
* 1 0.25 Sec.
* 2 0.5 Sec.
* 3 1.0 Sec.
* 4 2.0 Sec.
* 5 4.0 Sec.
* 6 8.0 Sec.
* 7 0.0 Sec.
peci_legacy
= ============================================
0 Standard Mode (default)
Remote Diode 1 reading is associated with
Temperature Zone 1, PECI is associated with
......@@ -270,10 +293,12 @@ peci_legacy
1 Legacy Mode
PECI is associated with Temperature Zone 1,
Remote Diode 1 is associated with Zone 4
= ============================================
peci_diode
Diode filter
= ====================
0 0.25 Sec.
1 1.1 Sec.
2 2.4 Sec. (default)
......@@ -282,15 +307,20 @@ peci_diode
5 6.8 Sec.
6 10.2 Sec.
7 16.4 Sec.
= ====================
peci_4domain
Four domain enable
= ===============================================
0 1 or 2 Domains for enabled processors (default)
1 3 or 4 Domains for enabled processors
= ===============================================
peci_domain
Domain
= ==================================================
0 Processor contains a single domain (0) (default)
1 Processor contains two domains (0,1)
= ==================================================
Documentation/hwmon/aspeed-pwm-tacho → Documentation/hwmon/aspeed-pwm-tacho.rst
View file @ 7aefd944
......@@ -15,8 +15,10 @@ controller supports up to 16 tachometer inputs.
The driver provides the following sensor accesses in sysfs:
=============== ======= =====================================================
fanX_input ro provide current fan rotation value in RPM as reported
by the fan to the device.
pwmX rw get or set PWM fan control value. This is an integer
value between 0(off) and 255(full speed).
=============== ======= =====================================================
Documentation/hwmon/coretemp → Documentation/hwmon/coretemp.rst
View file @ 7aefd944
......@@ -3,20 +3,29 @@ Kernel driver coretemp
Supported chips:
* All Intel Core family
Prefix: 'coretemp'
CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
0x36 (Cedar Trail Atom)
Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
CPUID: family 0x6, models
- 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
- 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
- 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
- 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
- 0x36 (Cedar Trail Atom)
Datasheet:
Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3A: System Programming Guide
http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
Author: Rudolf Marek
Description
-----------
This driver permits reading the DTS (Digital Temperature Sensor) embedded
inside Intel CPUs. This driver can read both the per-core and per-package
temperature using the appropriate sensors. The per-package sensor is new;
......@@ -35,14 +44,17 @@ may be raised, if the temperature grows enough (more than TjMax) to trigger
the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
All Sysfs entries are named with their core_id (represented here by 'X').
tempX_input - Core temperature (in millidegrees Celsius).
tempX_max - All cooling devices should be turned on (on Core2).
tempX_crit - Maximum junction temperature (in millidegrees Celsius).
tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
================= ========================================================
tempX_input Core temperature (in millidegrees Celsius).
tempX_max All cooling devices should be turned on (on Core2).
tempX_crit Maximum junction temperature (in millidegrees Celsius).
tempX_crit_alarm Set when Out-of-spec bit is set, never clears.
Correct CPU operation is no longer guaranteed.
tempX_label - Contains string "Core X", where X is processor
tempX_label Contains string "Core X", where X is processor
number. For Package temp, this will be "Physical id Y",
where Y is the package number.
================= ========================================================
On CPU models which support it, TjMax is read from a model-specific register.
On other models, it is set to an arbitrary value based on weak heuristics.
......@@ -52,6 +64,7 @@ as a module parameter (tjmax).
Appendix A. Known TjMax lists (TBD):
Some information comes from ark.intel.com
=============== =============================================== ================
Process Processor TjMax(C)
22nm Core i5/i7 Processors
......@@ -179,3 +192,4 @@ Process Processor TjMax(C)
65nm Celeron Processors
T1700/1600 100
560/550/540/530 100
=============== =============================================== ================
Documentation/hwmon/da9052 → Documentation/hwmon/da9052.rst
View file @ 7aefd944
Kernel driver da9052
====================
Supported chips:
* Dialog Semiconductors DA9052-BC and DA9053-AA/Bx PMICs
Prefix: 'da9052'
Datasheet: Datasheet is not publicly available.
Authors: David Dajun Chen <dchen@diasemi.com>
......@@ -15,17 +21,20 @@ different inputs. The track and hold circuit ensures stable input voltages at
the input of the ADC during the conversion.
The ADC is used to measure the following inputs:
Channel 0: VDDOUT - measurement of the system voltage
Channel 1: ICH - internal battery charger current measurement
Channel 2: TBAT - output from the battery NTC
Channel 3: VBAT - measurement of the battery voltage
Channel 4: ADC_IN4 - high impedance input (0 - 2.5V)
Channel 5: ADC_IN5 - high impedance input (0 - 2.5V)
Channel 6: ADC_IN6 - high impedance input (0 - 2.5V)
Channel 7: XY - TSI interface to measure the X and Y voltage of the touch
========= ===================================================================
Channel 0 VDDOUT - measurement of the system voltage
Channel 1 ICH - internal battery charger current measurement
Channel 2 TBAT - output from the battery NTC
Channel 3 VBAT - measurement of the battery voltage
Channel 4 ADC_IN4 - high impedance input (0 - 2.5V)
Channel 5 ADC_IN5 - high impedance input (0 - 2.5V)
Channel 6 ADC_IN6 - high impedance input (0 - 2.5V)
Channel 7 XY - TSI interface to measure the X and Y voltage of the touch
screen resistive potentiometers
Channel 8: Internal Tjunc. - sense (internal temp. sensor)
Channel 9: VBBAT - measurement of the backup battery voltage
Channel 8 Internal Tjunc. - sense (internal temp. sensor)
Channel 9 VBBAT - measurement of the backup battery voltage
========= ===================================================================
By using sysfs attributes we can measure the system voltage VDDOUT, the battery
charging current ICH, battery temperature TBAT, battery junction temperature
......@@ -37,12 +46,15 @@ Voltage Monitoring
Voltages are sampled by a 10 bit ADC.
The battery voltage is calculated as:
Milli volt = ((ADC value * 1000) / 512) + 2500
The backup battery voltage is calculated as:
Milli volt = (ADC value * 2500) / 512;
The voltages on ADC channels 4, 5 and 6 are calculated as:
Milli volt = (ADC value * 2500) / 1023
Temperature Monitoring
......@@ -52,10 +64,15 @@ Temperatures are sampled by a 10 bit ADC. Junction and battery temperatures
are monitored by the ADC channels.
The junction temperature is calculated:
Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8
The junction temperature attribute is supported by the driver.
The battery temperature is calculated:
Degree Celsius = 1 / (t1 + 1/298)- 273
Degree Celsius = 1 / (t1 + 1/298) - 273
where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255))
Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively.
Documentation/hwmon/da9055 → Documentation/hwmon/da9055.rst
View file @ 7aefd944
Kernel driver da9055
====================
Supported chips:
* Dialog Semiconductors DA9055 PMIC
Prefix: 'da9055'
Datasheet: Datasheet is not publicly available.
Authors: David Dajun Chen <dchen@diasemi.com>
......@@ -15,11 +20,12 @@ different inputs. The track and hold circuit ensures stable input voltages at
the input of the ADC during the conversion.
The ADC is used to measure the following inputs:
Channel 0: VDDOUT - measurement of the system voltage
Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
Channel 4: Internal Tjunc. - sense (internal temp. sensor)
- Channel 0: VDDOUT - measurement of the system voltage
- Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
- Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
- Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
- Channel 4: Internal Tjunc. - sense (internal temp. sensor)
By using sysfs attributes we can measure the system voltage VDDOUT,
chip junction temperature and auxiliary channels voltages.
......@@ -31,9 +37,11 @@ Voltages are sampled in a AUTO mode it can be manually sampled too and results
are stored in a 10 bit ADC.
The system voltage is calculated as:
Milli volt = ((ADC value * 1000) / 85) + 2500
The voltages on ADC channels 1, 2 and 3 are calculated as:
Milli volt = (ADC value * 1000) / 102
Temperature Monitoring
......@@ -43,5 +51,7 @@ Temperatures are sampled by a 10 bit ADC. Junction temperatures
are monitored by the ADC channels.
The junction temperature is calculated:
Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332
The junction temperature attribute is supported by the driver.
Documentation/hwmon/dme1737 → Documentation/hwmon/dme1737.rst
View file @ 7aefd944
......@@ -2,21 +2,37 @@ Kernel driver dme1737
=====================
Supported chips:
* SMSC DME1737 and compatibles (like Asus A8000)
Prefix: 'dme1737'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: Provided by SMSC upon request and under NDA
* SMSC SCH3112, SCH3114, SCH3116
Prefix: 'sch311x'
Addresses scanned: none, address read from Super-I/O config space
Datasheet: Available on the Internet
* SMSC SCH5027
Prefix: 'sch5027'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: Provided by SMSC upon request and under NDA
* SMSC SCH5127
Prefix: 'sch5127'
Addresses scanned: none, address read from Super-I/O config space
Datasheet: Provided by SMSC upon request and under NDA
Authors:
......@@ -26,11 +42,14 @@ Authors:
Module Parameters
-----------------
* force_start: bool Enables the monitoring of voltage, fan and temp inputs
* force_start: bool
Enables the monitoring of voltage, fan and temp inputs
and PWM output control functions. Using this parameter
shouldn't be required since the BIOS usually takes care
of this.
* probe_all_addr: bool Include non-standard LPC addresses 0x162e and 0x164e
* probe_all_addr: bool
Include non-standard LPC addresses 0x162e and 0x164e
when probing for ISA devices. This is required for the
following boards:
- VIA EPIA SN18000
......@@ -70,7 +89,8 @@ scaling resistors. The values returned by the driver therefore reflect true
millivolts and don't need scaling. The voltage inputs are mapped as follows
(the last column indicates the input ranges):
DME1737, A8000:
DME1737, A8000::
in0: +5VTR (+5V standby) 0V - 6.64V
in1: Vccp (processor core) 0V - 3V
in2: VCC (internal +3.3V) 0V - 4.38V
......@@ -79,7 +99,8 @@ DME1737, A8000:
in5: VTR (+3.3V standby) 0V - 4.38V
in6: Vbat (+3.0V) 0V - 4.38V
SCH311x:
SCH311x::
in0: +2.5V 0V - 3.32V
in1: Vccp (processor core) 0V - 2V
in2: VCC (internal +3.3V) 0V - 4.38V
......@@ -88,7 +109,8 @@ SCH311x:
in5: VTR (+3.3V standby) 0V - 4.38V
in6: Vbat (+3.0V) 0V - 4.38V
SCH5027:
SCH5027::
in0: +5VTR (+5V standby) 0V - 6.64V
in1: Vccp (processor core) 0V - 3V
in2: VCC (internal +3.3V) 0V - 4.38V
......@@ -97,7 +119,8 @@ SCH5027:
in5: VTR (+3.3V standby) 0V - 4.38V
in6: Vbat (+3.0V) 0V - 4.38V
SCH5127:
SCH5127::
in0: +2.5 0V - 3.32V
in1: Vccp (processor core) 0V - 3V
in2: VCC (internal +3.3V) 0V - 4.38V
......@@ -119,7 +142,7 @@ Celsius. The chip also features offsets for all 3 temperature inputs which -
when programmed - get added to the input readings. The chip does all the
scaling by itself and the driver therefore reports true temperatures that don't
need any user-space adjustments. The temperature inputs are mapped as follows
(the last column indicates the input ranges):
(the last column indicates the input ranges)::
temp1: Remote diode 1 (3904 type) temperature -127C - +127C
temp2: DME1737 internal temperature -127C - +127C
......@@ -171,6 +194,7 @@ pwm[1-3]_auto_pwm_min, respectively. The thermal thresholds of the zones are
programmed via zone[1-3]_auto_point[1-3]_temp and
zone[1-3]_auto_point1_temp_hyst:
=============================== =======================================
pwm[1-3]_auto_point2_pwm full-speed duty-cycle (255, i.e., 100%)
pwm[1-3]_auto_point1_pwm low-speed duty-cycle
pwm[1-3]_auto_pwm_min min-speed duty-cycle
......@@ -179,6 +203,7 @@ zone[1-3]_auto_point1_temp_hyst:
zone[1-3]_auto_point2_temp full-speed temp
zone[1-3]_auto_point1_temp low-speed temp
zone[1-3]_auto_point1_temp_hyst min-speed temp
=============================== =======================================
The chip adjusts the output duty-cycle linearly in the range of auto_point1_pwm
to auto_point2_pwm if the temperature of the associated zone is between
......@@ -192,17 +217,21 @@ all PWM outputs are set to 100% duty-cycle.
Following is another representation of how the chip sets the output duty-cycle
based on the temperature of the associated thermal zone:
Duty-Cycle Duty-Cycle
Temperature Rising Temp Falling Temp
----------- ----------- ------------
=============== =============== =================
Temperature Duty-Cycle Duty-Cycle
Rising Temp Falling Temp
=============== =============== =================
full-speed full-speed full-speed
< linearly adjusted duty-cycle >
- < linearly -
adjusted
duty-cycle >
low-speed low-speed low-speed
min-speed low-speed
- min-speed low-speed
min-speed min-speed min-speed
min-speed min-speed
- min-speed min-speed
=============== =============== =================
Sysfs Attributes
......@@ -211,8 +240,9 @@ Sysfs Attributes
Following is a list of all sysfs attributes that the driver provides, their
permissions and a short description:
=============================== ======= =======================================
Name Perm Description
---- ---- -----------
=============================== ======= =======================================
cpu0_vid RO CPU core reference voltage in
millivolts.
vrm RW Voltage regulator module version
......@@ -242,9 +272,10 @@ temp[1-3]_fault RO Temp input fault. Returns 1 if the chip
zone[1-3]_auto_channels_temp RO Temperature zone to temperature input
mapping. This attribute is a bitfield
and supports the following values:
1: temp1
2: temp2
4: temp3
- 1: temp1
- 2: temp2
- 4: temp3
zone[1-3]_auto_point1_temp_hyst RW Auto PWM temp point1 hysteresis. The
output of the corresponding PWM is set
to the pwm_auto_min value if the temp
......@@ -275,9 +306,10 @@ pmw[1-3,5-6] RO/RW Duty-cycle of PWM output. Supported
manual mode.
pwm[1-3]_enable RW Enable of PWM outputs 1-3. Supported
values are:
0: turned off (output @ 100%)
1: manual mode
2: automatic mode
- 0: turned off (output @ 100%)
- 1: manual mode
- 2: automatic mode
pwm[5-6]_enable RO Enable of PWM outputs 5-6. Always
returns 1 since these 2 outputs are
hard-wired to manual mode.
......@@ -294,11 +326,12 @@ pmw[1-3]_ramp_rate RW Ramp rate of PWM output. Determines how
pwm[1-3]_auto_channels_zone RW PWM output to temperature zone mapping.
This attribute is a bitfield and
supports the following values:
1: zone1
2: zone2
4: zone3
6: highest of zone[2-3]
7: highest of zone[1-3]
- 1: zone1
- 2: zone2
- 4: zone3
- 6: highest of zone[2-3]
- 7: highest of zone[1-3]
pwm[1-3]_auto_pwm_min RW Auto PWM min pwm. Minimum PWM duty-
cycle. Supported values are 0 or
auto_point1_pwm.
......@@ -307,12 +340,14 @@ pwm[1-3]_auto_point1_pwm RW Auto PWM pwm point. Auto_point1 is the
pwm[1-3]_auto_point2_pwm RO Auto PWM pwm point. Auto_point2 is the
full-speed duty-cycle which is hard-
wired to 255 (100% duty-cycle).
=============================== ======= =======================================
Chip Differences
----------------
======================= ======= ======= ======= =======
Feature dme1737 sch311x sch5027 sch5127
-------------------------------------------------------
======================= ======= ======= ======= =======
temp[1-3]_offset yes yes
vid yes
zone3 yes yes yes
......@@ -326,3 +361,4 @@ pwm5 opt opt
fan6 opt opt
pwm6 opt opt
in7 yes
======================= ======= ======= ======= =======
Documentation/hwmon/ds1621 → Documentation/hwmon/ds1621.rst
View file @ 7aefd944
......@@ -2,42 +2,61 @@ Kernel driver ds1621
====================
Supported chips:
* Dallas Semiconductor / Maxim Integrated DS1621
Prefix: 'ds1621'
Addresses scanned: none
Datasheet: Publicly available from www.maximintegrated.com
* Dallas Semiconductor DS1625
Prefix: 'ds1625'
Addresses scanned: none
Datasheet: Publicly available from www.datasheetarchive.com
* Maxim Integrated DS1631
Prefix: 'ds1631'
Addresses scanned: none
Datasheet: Publicly available from www.maximintegrated.com
* Maxim Integrated DS1721
Prefix: 'ds1721'
Addresses scanned: none
Datasheet: Publicly available from www.maximintegrated.com
* Maxim Integrated DS1731
Prefix: 'ds1731'
Addresses scanned: none
Datasheet: Publicly available from www.maximintegrated.com
Authors:
Christian W. Zuckschwerdt <zany@triq.net>
valuable contributions by Jan M. Sendler <sendler@sendler.de>
ported to 2.6 by Aurelien Jarno <aurelien@aurel32.net>
- Christian W. Zuckschwerdt <zany@triq.net>
- valuable contributions by Jan M. Sendler <sendler@sendler.de>
- ported to 2.6 by Aurelien Jarno <aurelien@aurel32.net>
with the help of Jean Delvare <jdelvare@suse.de>
Module Parameters
------------------
* polarity int
Output's polarity: 0 = active high, 1 = active low
Output's polarity:
* 0 = active high,
* 1 = active low
Description
-----------
......@@ -87,28 +106,31 @@ are used internally, however, these flags do get set and cleared as the actual
temperature crosses the min or max settings (which by default are set to 75
and 80 degrees respectively).
Temperature Conversion:
-----------------------
DS1621 - 750ms (older devices may take up to 1000ms)
DS1625 - 500ms
DS1631 - 93ms..750ms for 9..12 bits resolution, respectively.
DS1721 - 93ms..750ms for 9..12 bits resolution, respectively.
DS1731 - 93ms..750ms for 9..12 bits resolution, respectively.
Temperature Conversion
----------------------
- DS1621 - 750ms (older devices may take up to 1000ms)
- DS1625 - 500ms
- DS1631 - 93ms..750ms for 9..12 bits resolution, respectively.
- DS1721 - 93ms..750ms for 9..12 bits resolution, respectively.
- DS1731 - 93ms..750ms for 9..12 bits resolution, respectively.
Note:
On the DS1621, internal access to non-volatile registers may last for 10ms
or less (unverified on the other devices).
Temperature Accuracy:
---------------------
DS1621: +/- 0.5 degree Celsius (from 0 to +70 degrees)
DS1625: +/- 0.5 degree Celsius (from 0 to +70 degrees)
DS1631: +/- 0.5 degree Celsius (from 0 to +70 degrees)
DS1721: +/- 1.0 degree Celsius (from -10 to +85 degrees)
DS1731: +/- 1.0 degree Celsius (from -10 to +85 degrees)
Temperature Accuracy
--------------------
Note:
Please refer to the device datasheets for accuracy at other temperatures.
- DS1621: +/- 0.5 degree Celsius (from 0 to +70 degrees)
- DS1625: +/- 0.5 degree Celsius (from 0 to +70 degrees)
- DS1631: +/- 0.5 degree Celsius (from 0 to +70 degrees)
- DS1721: +/- 1.0 degree Celsius (from -10 to +85 degrees)
- DS1731: +/- 1.0 degree Celsius (from -10 to +85 degrees)
.. Note::
Please refer to the device datasheets for accuracy at other temperatures.
Temperature Resolution:
-----------------------
......@@ -117,60 +139,67 @@ support, which is achieved via the R0 and R1 config register bits, where:
R0..R1
------
0 0 => 9 bits, 0.5 degrees Celsius
1 0 => 10 bits, 0.25 degrees Celsius
0 1 => 11 bits, 0.125 degrees Celsius
1 1 => 12 bits, 0.0625 degrees Celsius
Note:
At initial device power-on, the default resolution is set to 12-bits.
== == ===============================
R0 R1
== == ===============================
0 0 9 bits, 0.5 degrees Celsius
1 0 10 bits, 0.25 degrees Celsius
0 1 11 bits, 0.125 degrees Celsius
1 1 12 bits, 0.0625 degrees Celsius
== == ===============================
.. Note::
At initial device power-on, the default resolution is set to 12-bits.
The resolution mode for the DS1631, DS1721, or DS1731 can be changed from
userspace, via the device 'update_interval' sysfs attribute. This attribute
will normalize the range of input values to the device maximum resolution
values defined in the datasheet as follows:
============= ================== ===============
Resolution Conversion Time Input Range
(C/LSB) (msec) (msec)
------------------------------------------------
============= ================== ===============
0.5 93.75 0....94
0.25 187.5 95...187
0.125 375 188..375
0.0625 750 376..infinity
------------------------------------------------
============= ================== ===============
The following examples show how the 'update_interval' attribute can be
used to change the conversion time:
$ cat update_interval
750
$ cat temp1_input
22062
$
$ echo 300 > update_interval
$ cat update_interval
375
$ cat temp1_input
22125
$
$ echo 150 > update_interval
$ cat update_interval
188
$ cat temp1_input
22250
$
$ echo 1 > update_interval
$ cat update_interval
94
$ cat temp1_input
22000
$
$ echo 1000 > update_interval
$ cat update_interval
750
$ cat temp1_input
22062
$
used to change the conversion time::
$ cat update_interval
750
$ cat temp1_input
22062
$
$ echo 300 > update_interval
$ cat update_interval
375
$ cat temp1_input
22125
$
$ echo 150 > update_interval
$ cat update_interval
188
$ cat temp1_input
22250
$
$ echo 1 > update_interval
$ cat update_interval
94
$ cat temp1_input
22000
$
$ echo 1000 > update_interval
$ cat update_interval
750
$ cat temp1_input
22062
$
As shown, the ds1621 driver automatically adjusts the 'update_interval'
user input, via a step function. Reading back the 'update_interval' value
......@@ -182,6 +211,7 @@ via the following function:
g(x) = 0.5 * [minimum_conversion_time/x]
where:
-> 'x' = the output from 'update_interval'
-> 'g(x)' = the resolution in degrees C per LSB.
-> 93.75ms = minimum conversion time
- 'x' = the output from 'update_interval'
- 'g(x)' = the resolution in degrees C per LSB.
- 93.75ms = minimum conversion time
Documentation/hwmon/ds620 → Documentation/hwmon/ds620.rst
View file @ 7aefd944
......@@ -2,9 +2,13 @@ Kernel driver ds620
===================
Supported chips:
* Dallas Semiconductor DS620
Prefix: 'ds620'
Datasheet: Publicly available at the Dallas Semiconductor website
http://www.dalsemi.com/
Authors:
......
Documentation/hwmon/emc1403 → Documentation/hwmon/emc1403.rst
View file @ 7aefd944
......@@ -2,28 +2,48 @@ Kernel driver emc1403
=====================
Supported chips:
* SMSC / Microchip EMC1402, EMC1412
Addresses scanned: I2C 0x18, 0x1c, 0x29, 0x4c, 0x4d, 0x5c
Prefix: 'emc1402'
Datasheets:
http://ww1.microchip.com/downloads/en/DeviceDoc/1412.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/1402.pdf
- http://ww1.microchip.com/downloads/en/DeviceDoc/1412.pdf
- http://ww1.microchip.com/downloads/en/DeviceDoc/1402.pdf
* SMSC / Microchip EMC1403, EMC1404, EMC1413, EMC1414
Addresses scanned: I2C 0x18, 0x29, 0x4c, 0x4d
Prefix: 'emc1403', 'emc1404'
Datasheets:
http://ww1.microchip.com/downloads/en/DeviceDoc/1403_1404.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/1413_1414.pdf
- http://ww1.microchip.com/downloads/en/DeviceDoc/1403_1404.pdf
- http://ww1.microchip.com/downloads/en/DeviceDoc/1413_1414.pdf
* SMSC / Microchip EMC1422
Addresses scanned: I2C 0x4c
Prefix: 'emc1422'
Datasheet:
http://ww1.microchip.com/downloads/en/DeviceDoc/1422.pdf
- http://ww1.microchip.com/downloads/en/DeviceDoc/1422.pdf
* SMSC / Microchip EMC1423, EMC1424
Addresses scanned: I2C 0x4c
Prefix: 'emc1423', 'emc1424'
Datasheet:
http://ww1.microchip.com/downloads/en/DeviceDoc/1423_1424.pdf
- http://ww1.microchip.com/downloads/en/DeviceDoc/1423_1424.pdf
Author:
Kalhan Trisal <kalhan.trisal@intel.com
......@@ -46,6 +66,7 @@ difference between the limit and its hysteresis is always the same for
all three limits.
This implementation detail implies the following:
* When setting a limit, its hysteresis will automatically follow, the
difference staying unchanged. For example, if the old critical limit
was 80 degrees C, and the hysteresis was 75 degrees C, and you change
......
Documentation/hwmon/emc2103 → Documentation/hwmon/emc2103.rst
View file @ 7aefd944
......@@ -2,9 +2,13 @@ Kernel driver emc2103
======================
Supported chips:
* SMSC EMC2103
Addresses scanned: I2C 0x2e
Prefix: 'emc2103'
Datasheet: Not public
Authors:
......
Documentation/hwmon/emc6w201 → Documentation/hwmon/emc6w201.rst
View file @ 7aefd944
......@@ -2,9 +2,13 @@ Kernel driver emc6w201
======================
Supported chips:
* SMSC EMC6W201
Prefix: 'emc6w201'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: Not public
Author: Jean Delvare <jdelvare@suse.de>
......@@ -38,5 +42,6 @@ Known Systems With EMC6W201
The EMC6W201 is a rare device, only found on a few systems, made in
2005 and 2006. Known systems with this device:
* Dell Precision 670 workstation
* Gigabyte 2CEWH mainboard
Documentation/hwmon/f71805f → Documentation/hwmon/f71805f.rst
View file @ 7aefd944
......@@ -2,17 +2,29 @@ Kernel driver f71805f
=====================
Supported chips:
* Fintek F71805F/FG
Prefix: 'f71805f'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
* Fintek F71806F/FG
Prefix: 'f71872f'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
* Fintek F71872F/FG
Prefix: 'f71872f'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
Author: Jean Delvare <jdelvare@suse.de>
......@@ -64,24 +76,26 @@ you can only set the limits in steps of 32 mV (before scaling).
The wirings and resistor values suggested by Fintek are as follow:
pin expected
======= ======= =========== ==== ======= ============ ==============
in pin expected
name use R1 R2 divider raw val.
======= ======= =========== ==== ======= ============ ==============
in0 VCC VCC3.3V int. int. 2.00 1.65 V
in1 VIN1 VTT1.2V 10K - 1.00 1.20 V
in2 VIN2 VRAM 100K 100K 2.00 ~1.25 V (1)
in3 VIN3 VCHIPSET 47K 100K 1.47 2.24 V (2)
in2 VIN2 VRAM 100K 100K 2.00 ~1.25 V [1]_
in3 VIN3 VCHIPSET 47K 100K 1.47 2.24 V [2]_
in4 VIN4 VCC5V 200K 47K 5.25 0.95 V
in5 VIN5 +12V 200K 20K 11.00 1.05 V
in6 VIN6 VCC1.5V 10K - 1.00 1.50 V
in7 VIN7 VCORE 10K - 1.00 ~1.40 V (1)
in7 VIN7 VCORE 10K - 1.00 ~1.40 V [1]_
in8 VIN8 VSB5V 200K 47K 1.00 0.95 V
in10 VSB VSB3.3V int. int. 2.00 1.65 V (3)
in9 VBAT VBATTERY int. int. 2.00 1.50 V (3)
in10 VSB VSB3.3V int. int. 2.00 1.65 V [3]_
in9 VBAT VBATTERY int. int. 2.00 1.50 V [3]_
======= ======= =========== ==== ======= ============ ==============
(1) Depends on your hardware setup.
(2) Obviously not correct, swapping R1 and R2 would make more sense.
(3) F71872F/FG only.
.. [1] Depends on your hardware setup.
.. [2] Obviously not correct, swapping R1 and R2 would make more sense.
.. [3] F71872F/FG only.
These values can be used as hints at best, as motherboard manufacturers
are free to use a completely different setup. As a matter of fact, the
......
Documentation/hwmon/f71882fg → Documentation/hwmon/f71882fg.rst
View file @ 7aefd944
......@@ -2,60 +2,114 @@ Kernel driver f71882fg
======================
Supported chips:
* Fintek F71808E
Prefix: 'f71808e'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Not public
* Fintek F71808A
Prefix: 'f71808a'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Not public
* Fintek F71858FG
Prefix: 'f71858fg'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
* Fintek F71862FG and F71863FG
Prefix: 'f71862fg'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
* Fintek F71869F and F71869E
Prefix: 'f71869'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
* Fintek F71869A
Prefix: 'f71869a'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Not public
* Fintek F71882FG and F71883FG
Prefix: 'f71882fg'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
* Fintek F71889FG
Prefix: 'f71889fg'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
* Fintek F71889ED
Prefix: 'f71889ed'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Should become available on the Fintek website soon
* Fintek F71889A
Prefix: 'f71889a'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Should become available on the Fintek website soon
* Fintek F8000
Prefix: 'f8000'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Not public
* Fintek F81801U
Prefix: 'f71889fg'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Not public
Note: This is the 64-pin variant of the F71889FG, they have the
Note:
This is the 64-pin variant of the F71889FG, they have the
same device ID and are fully compatible as far as hardware
monitoring is concerned.
* Fintek F81865F
Prefix: 'f81865f'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
Author: Hans de Goede <hdegoede@redhat.com>
......
Documentation/hwmon/fam15h_power → Documentation/hwmon/fam15h_power.rst
View file @ 7aefd944
......@@ -2,15 +2,20 @@ Kernel driver fam15h_power
==========================
Supported chips:
* AMD Family 15h Processors
* AMD Family 16h Processors
Prefix: 'fam15h_power'
Addresses scanned: PCI space
Datasheets:
BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors
AMD64 Architecture Programmer's Manual Volume 2: System Programming
- BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
- BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors
- AMD64 Architecture Programmer's Manual Volume 2: System Programming
Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
......@@ -31,14 +36,19 @@ For AMD Family 15h and 16h processors the following power values can
be calculated using different processor northbridge function
registers:
* BasePwrWatts: Specifies in watts the maximum amount of power
* BasePwrWatts:
Specifies in watts the maximum amount of power
consumed by the processor for NB and logic external to the core.
* ProcessorPwrWatts: Specifies in watts the maximum amount of power
* ProcessorPwrWatts:
Specifies in watts the maximum amount of power
the processor can support.
* CurrPwrWatts: Specifies in watts the current amount of power being
* CurrPwrWatts:
Specifies in watts the current amount of power being
consumed by the processor.
This driver provides ProcessorPwrWatts and CurrPwrWatts:
* power1_crit (ProcessorPwrWatts)
* power1_input (CurrPwrWatts)
......@@ -53,35 +63,53 @@ calculate the average power consumed by a processor during a
measurement interval Tm. The feature of accumulated power mechanism is
indicated by CPUID Fn8000_0007_EDX[12].
* Tsample: compute unit power accumulator sample period
* Tref: the PTSC counter period
* PTSC: performance timestamp counter
* N: the ratio of compute unit power accumulator sample period to the
* Tsample:
compute unit power accumulator sample period
* Tref:
the PTSC counter period
* PTSC:
performance timestamp counter
* N:
the ratio of compute unit power accumulator sample period to the
PTSC period
* Jmax: max compute unit accumulated power which is indicated by
* Jmax:
max compute unit accumulated power which is indicated by
MaxCpuSwPwrAcc MSR C001007b
* Jx/Jy: compute unit accumulated power which is indicated by
* Jx/Jy:
compute unit accumulated power which is indicated by
CpuSwPwrAcc MSR C001007a
* Tx/Ty: the value of performance timestamp counter which is indicated
* Tx/Ty:
the value of performance timestamp counter which is indicated
by CU_PTSC MSR C0010280
* PwrCPUave: CPU average power
* PwrCPUave:
CPU average power
i. Determine the ratio of Tsample to Tref by executing CPUID Fn8000_0007.
N = value of CPUID Fn8000_0007_ECX[CpuPwrSampleTimeRatio[15:0]].
ii. Read the full range of the cumulative energy value from the new
MSR MaxCpuSwPwrAcc.
MSR MaxCpuSwPwrAcc.
Jmax = value returned.
iii. At time x, SW reads CpuSwPwrAcc MSR and samples the PTSC.
Jx = value read from CpuSwPwrAcc and Tx = value read from
PTSC.
Jx = value read from CpuSwPwrAcc and Tx = value read from PTSC.
iv. At time y, SW reads CpuSwPwrAcc MSR and samples the PTSC.
Jy = value read from CpuSwPwrAcc and Ty = value read from
PTSC.
Jy = value read from CpuSwPwrAcc and Ty = value read from PTSC.
v. Calculate the average power consumption for a compute unit over
time period (y-x). Unit of result is uWatt.
time period (y-x). Unit of result is uWatt::
if (Jy < Jx) // Rollover has occurred
Jdelta = (Jy + Jmax) - Jx
else
......@@ -90,13 +118,14 @@ time period (y-x). Unit of result is uWatt.
This driver provides PwrCPUave and interval(default is 10 millisecond
and maximum is 1 second):
* power1_average (PwrCPUave)
* power1_average_interval (Interval)
The power1_average_interval can be updated at /etc/sensors3.conf file
as below:
chip "fam15h_power-*"
chip `fam15h_power-*`
set power1_average_interval 0.01
Then save it with "sensors -s".
Documentation/hwmon/ftsteutates → Documentation/hwmon/ftsteutates.rst
View file @ 7aefd944
Kernel driver ftsteutates
=====================
=========================
Supported chips:
* FTS Teutates
Prefix: 'ftsteutates'
Addresses scanned: I2C 0x73 (7-Bit)
Author: Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com>
......@@ -11,6 +14,7 @@ Author: Thilo Cestonaro <thilo.cestonaro@ts.fujitsu.com>
Description
-----------
The BMC Teutates is the Eleventh generation of Superior System
monitoring and thermal management solution. It is builds on the basic
functionality of the BMC Theseus and contains several new features and
......@@ -19,9 +23,11 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
implemented in this driver.
To clear a temperature or fan alarm, execute the following command with the
correct path to the alarm file:
correct path to the alarm file::
echo 0 >XXXX_alarm
Specification of the chip can be found here:
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf
- ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf
- ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf
Documentation/hwmon/g760a → Documentation/hwmon/g760a.rst
View file @ 7aefd944
......@@ -2,9 +2,13 @@ Kernel driver g760a
===================
Supported chips:
* Global Mixed-mode Technology Inc. G760A
Prefix: 'g760a'
Datasheet: Publicly available at the GMT website
http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
Author: Herbert Valerio Riedel <hvr@gnu.org>
......
Documentation/hwmon/g762 → Documentation/hwmon/g762.rst
View file @ 7aefd944
......@@ -7,7 +7,7 @@ modes - PWM or DC - are supported by the device.
For additional information, a detailed datasheet is available at
http://natisbad.org/NAS/ref/GMT_EDS-762_763-080710-0.2.pdf. sysfs
bindings are described in Documentation/hwmon/sysfs-interface.
bindings are described in Documentation/hwmon/sysfs-interface.rst.
The following entries are available to the user in a subdirectory of
/sys/bus/i2c/drivers/g762/ to control the operation of the device.
......@@ -21,32 +21,41 @@ documented in Documentation/devicetree/bindings/hwmon/g762.txt or
using a specific platform_data structure in board initialization
file (see include/linux/platform_data/g762.h).
fan1_target: set desired fan speed. This only makes sense in closed-loop
fan1_target:
set desired fan speed. This only makes sense in closed-loop
fan speed control (i.e. when pwm1_enable is set to 2).
fan1_input: provide current fan rotation value in RPM as reported by
fan1_input:
provide current fan rotation value in RPM as reported by
the fan to the device.
fan1_div: fan clock divisor. Supported value are 1, 2, 4 and 8.
fan1_div:
fan clock divisor. Supported value are 1, 2, 4 and 8.
fan1_pulses: number of pulses per fan revolution. Supported values
fan1_pulses:
number of pulses per fan revolution. Supported values
are 2 and 4.
fan1_fault: reports fan failure, i.e. no transition on fan gear pin for
fan1_fault:
reports fan failure, i.e. no transition on fan gear pin for
about 0.7s (if the fan is not voluntarily set off).
fan1_alarm: in closed-loop control mode, if fan RPM value is 25% out
fan1_alarm:
in closed-loop control mode, if fan RPM value is 25% out
of the programmed value for over 6 seconds 'fan1_alarm' is
set to 1.
pwm1_enable: set current fan speed control mode i.e. 1 for manual fan
pwm1_enable:
set current fan speed control mode i.e. 1 for manual fan
speed control (open-loop) via pwm1 described below, 2 for
automatic fan speed control (closed-loop) via fan1_target
above.
pwm1_mode: set or get fan driving mode: 1 for PWM mode, 0 for DC mode.
pwm1_mode:
set or get fan driving mode: 1 for PWM mode, 0 for DC mode.
pwm1: get or set PWM fan control value in open-loop mode. This is an
pwm1:
get or set PWM fan control value in open-loop mode. This is an
integer value between 0 and 255. 0 stops the fan, 255 makes
it run at full speed.
......
Documentation/hwmon/gl518sm → Documentation/hwmon/gl518sm.rst
View file @ 7aefd944
......@@ -2,27 +2,34 @@ Kernel driver gl518sm
=====================
Supported chips:
* Genesys Logic GL518SM release 0x00
Prefix: 'gl518sm'
Addresses scanned: I2C 0x2c and 0x2d
* Genesys Logic GL518SM release 0x80
Prefix: 'gl518sm'
Addresses scanned: I2C 0x2c and 0x2d
Datasheet: http://www.genesyslogic.com/
Authors:
Frodo Looijaard <frodol@dds.nl>,
Kyösti Mälkki <kmalkki@cc.hut.fi>
Hong-Gunn Chew <hglinux@gunnet.org>
Jean Delvare <jdelvare@suse.de>
- Frodo Looijaard <frodol@dds.nl>,
- Kyösti Mälkki <kmalkki@cc.hut.fi>
- Hong-Gunn Chew <hglinux@gunnet.org>
- Jean Delvare <jdelvare@suse.de>
Description
-----------
IMPORTANT:
.. important::
For the revision 0x00 chip, the in0, in1, and in2 values (+5V, +3V,
and +12V) CANNOT be read. This is a limitation of the chip, not the driver.
For the revision 0x00 chip, the in0, in1, and in2 values (+5V, +3V,
and +12V) CANNOT be read. This is a limitation of the chip, not the driver.
This driver supports the Genesys Logic GL518SM chip. There are at least
two revision of this chip, which we call revision 0x00 and 0x80. Revision
......
Documentation/hwmon/hih6130 → Documentation/hwmon/hih6130.rst
View file @ 7aefd944
......@@ -2,10 +2,15 @@ Kernel driver hih6130
=====================
Supported chips:
* Honeywell HIH-6130 / HIH-6131
Prefix: 'hih6130'
Addresses scanned: none
Datasheet: Publicly available at the Honeywell website
http://sensing.honeywell.com/index.php?ci_id=3106&la_id=1&defId=44872
Author:
......@@ -28,8 +33,11 @@ instantiate I2C devices.
sysfs-Interface
---------------
temp1_input - temperature input
humidity1_input - humidity input
temp1_input
temperature input
humidity1_input
humidity input
Notes
-----
......
Documentation/hwmon/ibm-cffps → Documentation/hwmon/ibm-cffps.rst
View file @ 7aefd944
......@@ -2,6 +2,7 @@ Kernel driver ibm-cffps
=======================
Supported chips:
* IBM Common Form Factor power supply
Author: Eddie James <eajames@us.ibm.com>
......@@ -24,6 +25,7 @@ Sysfs entries
The following attributes are supported:
======================= ======================================================
curr1_alarm Output current over-current alarm.
curr1_input Measured output current in mA.
curr1_label "iout1"
......@@ -52,3 +54,4 @@ temp2_alarm Secondary rectifier temp over-temperature alarm.
temp2_input Measured secondary rectifier temp in millidegrees C.
temp3_alarm ORing FET temperature over-temperature alarm.
temp3_input Measured ORing FET temperature in millidegrees C.
======================= ======================================================
Documentation/hwmon/ibmaem → Documentation/hwmon/ibmaem.rst
View file @ 7aefd944
Kernel driver ibmaem
======================
====================
This driver talks to the IBM Systems Director Active Energy Manager, known
henceforth as AEM.
Supported systems:
* Any recent IBM System X server with AEM support.
This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades. The IPMI host interface
x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades.
The IPMI host interface
driver ("ipmi-si") needs to be loaded for this driver to do anything.
Prefix: 'ibmaem'
Datasheet: Not available
Author: Darrick J. Wong
......
Documentation/hwmon/ibmpowernv → Documentation/hwmon/ibmpowernv.rst
View file @ 7aefd944
......@@ -2,6 +2,7 @@ Kernel Driver IBMPOWERNV
========================
Supported systems:
* Any recent IBM P servers based on POWERNV platform
Author: Neelesh Gupta
......@@ -29,10 +30,11 @@ CONFIG_SENSORS_IBMPOWERNV. It can also be built as module 'ibmpowernv'.
Sysfs attributes
----------------
======================= =======================================================
fanX_input Measured RPM value.
fanX_min Threshold RPM for alert generation.
fanX_fault 0: No fail condition
1: Failing fan
fanX_fault - 0: No fail condition
- 1: Failing fan
tempX_input Measured ambient temperature.
tempX_max Threshold ambient temperature for alert generation.
......@@ -42,20 +44,22 @@ tempX_enable Enable/disable all temperature sensors belonging to the
sub-group. In POWER9, this attribute corresponds to
each OCC. Using this attribute each OCC can be asked to
disable/enable all of its temperature sensors.
1: Enable
0: Disable
- 1: Enable
- 0: Disable
inX_input Measured power supply voltage (millivolt)
inX_fault 0: No fail condition.
1: Failing power supply.
inX_fault - 0: No fail condition.
- 1: Failing power supply.
inX_highest Historical maximum voltage
inX_lowest Historical minimum voltage
inX_enable Enable/disable all voltage sensors belonging to the
sub-group. In POWER9, this attribute corresponds to
each OCC. Using this attribute each OCC can be asked to
disable/enable all of its voltage sensors.
1: Enable
0: Disable
- 1: Enable
- 0: Disable
powerX_input Power consumption (microWatt)
powerX_input_highest Historical maximum power
......@@ -64,8 +68,9 @@ powerX_enable Enable/disable all power sensors belonging to the
sub-group. In POWER9, this attribute corresponds to
each OCC. Using this attribute each OCC can be asked to
disable/enable all of its power sensors.
1: Enable
0: Disable
- 1: Enable
- 0: Disable
currX_input Measured current (milliampere)
currX_highest Historical maximum current
......@@ -74,7 +79,9 @@ currX_enable Enable/disable all current sensors belonging to the
sub-group. In POWER9, this attribute corresponds to
each OCC. Using this attribute each OCC can be asked to
disable/enable all of its current sensors.
1: Enable
0: Disable
- 1: Enable
- 0: Disable
energyX_input Cumulative energy (microJoule)
======================= =======================================================
Documentation/hwmon/ina209 → Documentation/hwmon/ina209.rst
View file @ 7aefd944
Kernel driver ina209
=====================
====================
Supported chips:
* Burr-Brown / Texas Instruments INA209
Prefix: 'ina209'
Addresses scanned: -
Datasheet:
http://www.ti.com/lit/gpn/ina209
Author: Paul Hays <Paul.Hays@cattail.ca>
Author: Ira W. Snyder <iws@ovro.caltech.edu>
Author: Guenter Roeck <linux@roeck-us.net>
Author:
- Paul Hays <Paul.Hays@cattail.ca>
- Ira W. Snyder <iws@ovro.caltech.edu>
- Guenter Roeck <linux@roeck-us.net>
Description
......@@ -31,7 +36,7 @@ the I2C bus. See the datasheet for details.
This tries to expose most monitoring features of the hardware via
sysfs. It does not support every feature of this chip.
======================= =======================================================
in0_input shunt voltage (mV)
in0_input_highest shunt voltage historical maximum reading (mV)
in0_input_lowest shunt voltage historical minimum reading (mV)
......@@ -70,6 +75,7 @@ curr1_input current measurement (mA)
update_interval data conversion time; affects number of samples used
to average results for shunt and bus voltages.
======================= =======================================================
General Remarks
---------------
......
Documentation/hwmon/ina2xx → Documentation/hwmon/ina2xx.rst
View file @ 7aefd944
......@@ -2,34 +2,55 @@ Kernel driver ina2xx
====================
Supported chips:
* Texas Instruments INA219
Prefix: 'ina219'
Addresses: I2C 0x40 - 0x4f
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
* Texas Instruments INA220
Prefix: 'ina220'
Addresses: I2C 0x40 - 0x4f
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
* Texas Instruments INA226
Prefix: 'ina226'
Addresses: I2C 0x40 - 0x4f
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
* Texas Instruments INA230
Prefix: 'ina230'
Addresses: I2C 0x40 - 0x4f
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
* Texas Instruments INA231
Prefix: 'ina231'
Addresses: I2C 0x40 - 0x4f
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
Author: Lothar Felten <lothar.felten@gmail.com>
......@@ -57,23 +78,27 @@ refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings
if the device tree is used.
Additionally ina226 supports update_interval attribute as described in
Documentation/hwmon/sysfs-interface. Internally the interval is the sum of
Documentation/hwmon/sysfs-interface.rst. Internally the interval is the sum of
bus and shunt voltage conversion times multiplied by the averaging rate. We
don't touch the conversion times and only modify the number of averages. The
lower limit of the update_interval is 2 ms, the upper limit is 2253 ms.
The actual programmed interval may vary from the desired value.
General sysfs entries
-------------
---------------------
======================= ===============================
in0_input Shunt voltage(mV) channel
in1_input Bus voltage(mV) channel
curr1_input Current(mA) measurement channel
power1_input Power(uW) measurement channel
shunt_resistor Shunt resistance(uOhm) channel
======================= ===============================
Sysfs entries for ina226, ina230 and ina231 only
-------------
------------------------------------------------
======================= ====================================================
update_interval data conversion time; affects number of samples used
to average results for shunt and bus voltages.
======================= ====================================================
Documentation/hwmon/ina3221 → Documentation/hwmon/ina3221.rst
View file @ 7aefd944
......@@ -2,10 +2,15 @@ Kernel driver ina3221
=====================
Supported chips:
* Texas Instruments INA3221
Prefix: 'ina3221'
Addresses: I2C 0x40 - 0x43
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
Author: Andrew F. Davis <afd@ti.com>
......@@ -21,6 +26,7 @@ and power are calculated host-side from these.
Sysfs entries
-------------
======================= =======================================================
in[123]_label Voltage channel labels
in[123]_enable Voltage channel enable controls
in[123]_input Bus voltage(mV) channels
......@@ -35,3 +41,22 @@ curr[123]_max Warning alert current(mA) setting, activates the
average is above this value.
curr[123]_max_alarm Warning alert current limit exceeded
in[456]_input Shunt voltage(uV) for channels 1, 2, and 3 respectively
samples Number of samples using in the averaging mode.
Supports the list of number of samples:
1, 4, 16, 64, 128, 256, 512, 1024
update_interval Data conversion time in millisecond, following:
update_interval = C x S x (BC + SC)
* C: number of enabled channels
* S: number of samples
* BC: bus-voltage conversion time in millisecond
* SC: shunt-voltage conversion time in millisecond
Affects both Bus- and Shunt-voltage conversion time.
Note that setting update_interval to 0ms sets both BC
and SC to 140 us (minimum conversion time).
======================= =======================================================
Documentation/hwmon/index.rst 0 → 100644
View file @ 7aefd944
=========================
Linux Hardware Monitoring
=========================
.. toctree::
:maxdepth: 1
hwmon-kernel-api
pmbus-core
submitting-patches
sysfs-interface
userspace-tools
Hardware Monitoring Kernel Drivers
==================================
.. toctree::
:maxdepth: 1
ab8500
abituguru
abituguru3
abx500
acpi_power_meter
ad7314
adc128d818
adm1021
adm1025
adm1026
adm1031
adm1275
adm9240
ads1015
ads7828
adt7410
adt7411
adt7462
adt7470
adt7475
amc6821
asb100
asc7621
aspeed-pwm-tacho
coretemp
da9052
da9055
dme1737
ds1621
ds620
emc1403
emc2103
emc6w201
f71805f
f71882fg
fam15h_power
ftsteutates
g760a
g762
gl518sm
hih6130
ibmaem
ibm-cffps
ibmpowernv
ina209
ina2xx
ina3221
ir35221
ir38064
isl68137
it87
jc42
k10temp
k8temp
lineage-pem
lm25066
lm63
lm70
lm73
lm75
lm77
lm78
lm80
lm83
lm85
lm87
lm90
lm92
lm93
lm95234
lm95245
lochnagar
ltc2945
ltc2978
ltc2990
ltc3815
ltc4151
ltc4215
ltc4245
ltc4260
ltc4261
max16064
max16065
max1619
max1668
max197
max20751
max31722
max31785
max31790
max34440
max6639
max6642
max6650
max6697
max8688
mc13783-adc
mcp3021
menf21bmc
mlxreg-fan
nct6683
nct6775
nct7802
nct7904
npcm750-pwm-fan
nsa320
ntc_thermistor
occ
pc87360
pc87427
pcf8591
pmbus
powr1220
pwm-fan
raspberrypi-hwmon
sch5627
sch5636
scpi-hwmon
sht15
sht21
sht3x
shtc1
sis5595
smm665
smsc47b397
smsc47m192
smsc47m1
tc654
tc74
thmc50
tmp102
tmp103
tmp108
tmp401
tmp421
tps40422
twl4030-madc-hwmon
ucd9000
ucd9200
vexpress
via686a
vt1211
w83627ehf
w83627hf
w83773g
w83781d
w83791d
w83792d
w83793
w83795
w83l785ts
w83l786ng
wm831x
wm8350
xgene-hwmon
zl6100
.. only:: subproject and html
Indices
=======
* :ref:`genindex`
Documentation/hwmon/ir35221 → Documentation/hwmon/ir35221.rst
View file @ 7aefd944
......@@ -2,9 +2,12 @@ Kernel driver ir35221
=====================
Supported chips:
* Infinion IR35221
* Infineon IR35221
Prefix: 'ir35221'
Addresses scanned: -
Datasheet: Datasheet is not publicly available.
Author: Samuel Mendoza-Jonas <sam@mendozajonas.com>
......@@ -23,15 +26,16 @@ This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
Example: the following commands will load the driver for an IR35221
at address 0x70 on I2C bus #4:
at address 0x70 on I2C bus #4::
# modprobe ir35221
# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
# modprobe ir35221
# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
Sysfs attributes
----------------
======================= =======================================================
curr1_label "iin"
curr1_input Measured input current
curr1_max Maximum current
......@@ -85,3 +89,4 @@ temp[1-2]_highest Highest temperature
temp[1-2]_lowest Lowest temperature
temp[1-2]_max Maximum temperature
temp[1-2]_max_alarm Chip temperature high alarm
======================= =======================================================
Documentation/hwmon/ir38064.rst 0 → 100644
View file @ 7aefd944
Kernel driver ir38064
=====================
Supported chips:
* Infineon IR38064
Prefix: 'ir38064'
Addresses scanned: -
Datasheet: Publicly available at the Infineon webiste
https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca
Authors:
- Maxim Sloyko <maxims@google.com>
- Patrick Venture <venture@google.com>
Description
-----------
IR38064 is a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter.
Usage Notes
-----------
This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
Sysfs attributes
----------------
======================= ===========================
curr1_label "iout1"
curr1_input Measured output current
curr1_crit Critical maximum current
curr1_crit_alarm Current critical high alarm
curr1_max Maximum current
curr1_max_alarm Current high alarm
in1_label "vin"
in1_input Measured input voltage
in1_crit Critical maximum input voltage
in1_crit_alarm Input voltage critical high alarm
in1_min Minimum input voltage
in1_min_alarm Input voltage low alarm
in2_label "vout1"
in2_input Measured output voltage
in2_lcrit Critical minimum output voltage
in2_lcrit_alarm Output voltage critical low alarm
in2_crit Critical maximum output voltage
in2_crit_alarm Output voltage critical high alarm
in2_max Maximum output voltage
in2_max_alarm Output voltage high alarm
in2_min Minimum output voltage
in2_min_alarm Output voltage low alarm
power1_label "pout1"
power1_input Measured output power
temp1_input Measured temperature
temp1_crit Critical high temperature
temp1_crit_alarm Chip temperature critical high alarm
temp1_max Maximum temperature
temp1_max_alarm Chip temperature high alarm
======================= ===========================
Documentation/hwmon/isl68137.rst 0 → 100644
View file @ 7aefd944
Kernel driver isl68137
======================
Supported chips:
* Intersil ISL68137
Prefix: 'isl68137'
Addresses scanned: -
Datasheet:
Publicly available at the Intersil website
https://www.intersil.com/content/dam/Intersil/documents/isl6/isl68137.pdf
Authors:
- Maxim Sloyko <maxims@google.com>
- Robert Lippert <rlippert@google.com>
- Patrick Venture <venture@google.com>
Description
-----------
Intersil ISL68137 is a digital output 7-phase configurable PWM
controller with an AVSBus interface.
Usage Notes
-----------
This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
The ISL68137 AVS operation mode must be enabled/disabled at runtime.
Beyond the normal sysfs pmbus attributes, the driver exposes a control attribute.
Additional Sysfs attributes
---------------------------
======================= ====================================
avs(0|1)_enable Controls the AVS state of each rail.
curr1_label "iin"
curr1_input Measured input current
curr1_crit Critical maximum current
curr1_crit_alarm Current critical high alarm
curr[2-3]_label "iout[1-2]"
curr[2-3]_input Measured output current
curr[2-3]_crit Critical maximum current
curr[2-3]_crit_alarm Current critical high alarm
in1_label "vin"
in1_input Measured input voltage
in1_lcrit Critical minimum input voltage
in1_lcrit_alarm Input voltage critical low alarm
in1_crit Critical maximum input voltage
in1_crit_alarm Input voltage critical high alarm
in[2-3]_label "vout[1-2]"
in[2-3]_input Measured output voltage
in[2-3]_lcrit Critical minimum output voltage
in[2-3]_lcrit_alarm Output voltage critical low alarm
in[2-3]_crit Critical maximum output voltage
in[2-3]_crit_alarm Output voltage critical high alarm
power1_label "pin"
power1_input Measured input power
power1_alarm Input power high alarm
power[2-3]_label "pout[1-2]"
power[2-3]_input Measured output power
temp[1-3]_input Measured temperature
temp[1-3]_crit Critical high temperature
temp[1-3]_crit_alarm Chip temperature critical high alarm
temp[1-3]_max Maximum temperature
temp[1-3]_max_alarm Chip temperature high alarm
======================= ====================================
Documentation/hwmon/it87 → Documentation/hwmon/it87.rst
View file @ 7aefd944
......@@ -2,92 +2,167 @@ Kernel driver it87
==================
Supported chips:
* IT8603E/IT8623E
Prefix: 'it8603'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8620E
Prefix: 'it8620'
Addresses scanned: from Super I/O config space (8 I/O ports)
* IT8628E
Prefix: 'it8628'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8705F
Prefix: 'it87'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Once publicly available at the ITE website, but no longer
* IT8712F
Prefix: 'it8712'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Once publicly available at the ITE website, but no longer
* IT8716F/IT8726F
Prefix: 'it8716'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Once publicly available at the ITE website, but no longer
* IT8718F
Prefix: 'it8718'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Once publicly available at the ITE website, but no longer
* IT8720F
Prefix: 'it8720'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8721F/IT8758E
Prefix: 'it8721'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8728F
Prefix: 'it8728'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8732F
Prefix: 'it8732'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8771E
Prefix: 'it8771'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8772E
Prefix: 'it8772'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8781F
Prefix: 'it8781'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8782F
Prefix: 'it8782'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8783E/F
Prefix: 'it8783'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8786E
Prefix: 'it8786'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8790E
Prefix: 'it8790'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* SiS950 [clone of IT8705F]
Prefix: 'it87'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: No longer be available
Authors:
Christophe Gauthron
Jean Delvare <jdelvare@suse.de>
- Christophe Gauthron
- Jean Delvare <jdelvare@suse.de>
Module Parameters
-----------------
* update_vbat: int
0 if vbat should report power on value, 1 if vbat should be updated after
each read. Default is 0. On some boards the battery voltage is provided
by either the battery or the onboard power supply. Only the first reading
......@@ -97,7 +172,6 @@ Module Parameters
battery life but no information is given in the datasheet.
* fix_pwm_polarity int
Force PWM polarity to active high (DANGEROUS). Some chips are
misconfigured by BIOS - PWM values would be inverted. This option tries
to fix this. Please contact your BIOS manufacturer and ask him for fix.
......
Documentation/hwmon/jc42 → Documentation/hwmon/jc42.rst
View file @ 7aefd944
......@@ -2,53 +2,100 @@ Kernel driver jc42
==================
Supported chips:
* Analog Devices ADT7408
Datasheets:
http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
* Atmel AT30TS00, AT30TS002A/B, AT30TSE004A
Datasheets:
http://www.atmel.com/Images/doc8585.pdf
http://www.atmel.com/Images/doc8711.pdf
http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf
http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf
* IDT TSE2002B3, TSE2002GB2, TSE2004GB2, TS3000B3, TS3000GB0, TS3000GB2,
TS3001GB2
Datasheets:
Available from IDT web site
* Maxim MAX6604
Datasheets:
http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
* Microchip MCP9804, MCP9805, MCP9808, MCP98242, MCP98243, MCP98244, MCP9843
Datasheets:
http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/25095A.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
http://ww1.microchip.com/downloads/en/DeviceDoc/22327A.pdf
* NXP Semiconductors SE97, SE97B, SE98, SE98A
Datasheets:
http://www.nxp.com/documents/data_sheet/SE97.pdf
http://www.nxp.com/documents/data_sheet/SE97B.pdf
http://www.nxp.com/documents/data_sheet/SE98.pdf
http://www.nxp.com/documents/data_sheet/SE98A.pdf
* ON Semiconductor CAT34TS02, CAT6095
Datasheet:
http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF
http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF
* ST Microelectronics STTS424, STTS424E02, STTS2002, STTS2004, STTS3000
Datasheets:
http://www.st.com/web/en/resource/technical/document/datasheet/CD00157556.pdf
http://www.st.com/web/en/resource/technical/document/datasheet/CD00157558.pdf
http://www.st.com/web/en/resource/technical/document/datasheet/CD00266638.pdf
http://www.st.com/web/en/resource/technical/document/datasheet/CD00225278.pdf
http://www.st.com/web/en/resource/technical/document/datasheet/DM00076709.pdf
* JEDEC JC 42.4 compliant temperature sensor chips
Datasheet:
http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
Common for all chips:
Prefix: 'jc42'
Addresses scanned: I2C 0x18 - 0x1f
Author:
......@@ -67,10 +114,10 @@ The driver auto-detects the chips listed above, but can be manually instantiated
to support other JC 42.4 compliant chips.
Example: the following will load the driver for a generic JC 42.4 compliant
temperature sensor at address 0x18 on I2C bus #1:
temperature sensor at address 0x18 on I2C bus #1::
# modprobe jc42
# echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
# modprobe jc42
# echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
A JC 42.4 compliant chip supports a single temperature sensor. Minimum, maximum,
and critical temperature can be configured. There are alarms for high, low,
......@@ -90,6 +137,7 @@ cannot be changed.
Sysfs entries
-------------
======================= ===========================================
temp1_input Temperature (RO)
temp1_min Minimum temperature (RO or RW)
temp1_max Maximum temperature (RO or RW)
......@@ -101,3 +149,4 @@ temp1_max_hyst Maximum hysteresis temperature (RO)
temp1_min_alarm Temperature low alarm
temp1_max_alarm Temperature high alarm
temp1_crit_alarm Temperature critical alarm
======================= ===========================================
Documentation/hwmon/k10temp → Documentation/hwmon/k10temp.rst
View file @ 7aefd944
......@@ -2,42 +2,77 @@ Kernel driver k10temp
=====================
Supported chips:
* AMD Family 10h processors:
Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below)
Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below)
Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
Socket S1G3: Athlon II, Sempron, Turion II
* AMD Family 11h processors:
Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
* AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
* AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo"
* AMD Family 16h processors: "Kabini", "Mullins"
Prefix: 'k10temp'
Addresses scanned: PCI space
Datasheets:
BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors:
http://support.amd.com/us/Processor_TechDocs/31116.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41256.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 12h Processors:
http://support.amd.com/us/Processor_TechDocs/41131.pdf
BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
http://support.amd.com/us/Processor_TechDocs/43170.pdf
Revision Guide for AMD Family 10h Processors:
http://support.amd.com/us/Processor_TechDocs/41322.pdf
Revision Guide for AMD Family 11h Processors:
http://support.amd.com/us/Processor_TechDocs/41788.pdf
Revision Guide for AMD Family 12h Processors:
http://support.amd.com/us/Processor_TechDocs/44739.pdf
Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
http://support.amd.com/us/Processor_TechDocs/47534.pdf
AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
http://support.amd.com/us/Processor_TechDocs/43373.pdf
AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
http://support.amd.com/us/Processor_TechDocs/43374.pdf
AMD Family 10h Desktop Processor Power and Thermal Data Sheet:
http://support.amd.com/us/Processor_TechDocs/43375.pdf
Author: Clemens Ladisch <clemens@ladisch.de>
......@@ -60,7 +95,7 @@ are using an AM3 processor on an AM2+ mainboard, you can safely use the
There is one temperature measurement value, available as temp1_input in
sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.
Please note that it is defined as a relative value; to quote the AMD manual:
Please note that it is defined as a relative value; to quote the AMD manual::
Tctl is the processor temperature control value, used by the platform to
control cooling systems. Tctl is a non-physical temperature on an
......
Documentation/hwmon/k8temp → Documentation/hwmon/k8temp.rst
View file @ 7aefd944
......@@ -2,12 +2,17 @@ Kernel driver k8temp
====================
Supported chips:
* AMD Athlon64/FX or Opteron CPUs
Prefix: 'k8temp'
Addresses scanned: PCI space
Datasheet: http://support.amd.com/us/Processor_TechDocs/32559.pdf
Author: Rudolf Marek
Contact: Rudolf Marek <r.marek@assembler.cz>
Description
......@@ -27,10 +32,12 @@ implemented sensors.
Mapping of /sys files is as follows:
temp1_input - temperature of Core 0 and "place" 0
temp2_input - temperature of Core 0 and "place" 1
temp3_input - temperature of Core 1 and "place" 0
temp4_input - temperature of Core 1 and "place" 1
============= ===================================
temp1_input temperature of Core 0 and "place" 0
temp2_input temperature of Core 0 and "place" 1
temp3_input temperature of Core 1 and "place" 0
temp4_input temperature of Core 1 and "place" 1
============= ===================================
Temperatures are measured in degrees Celsius and measurement resolution is
1 degree C. It is expected that future CPU will have better resolution. The
......@@ -48,7 +55,7 @@ computed temperature called TControl, which must be lower than TControlMax.
The relationship is following:
temp1_input - TjOffset*2 < TControlMax,
temp1_input - TjOffset*2 < TControlMax,
TjOffset is not yet exported by the driver, TControlMax is usually
70 degrees C. The rule of the thumb -> CPU temperature should not cross
......
Documentation/hwmon/lineage-pem → Documentation/hwmon/lineage-pem.rst
View file @ 7aefd944
......@@ -2,10 +2,15 @@ Kernel driver lineage-pem
=========================
Supported devices:
* Lineage Compact Power Line Power Entry Modules
Prefix: 'lineage-pem'
Addresses scanned: -
Documentation:
http://www.lineagepower.com/oem/pdf/CPLI2C.pdf
Author: Guenter Roeck <linux@roeck-us.net>
......@@ -31,9 +36,10 @@ which can be safely used to identify the chip. You will have to instantiate
the devices explicitly.
Example: the following will load the driver for a Lineage PEM at address 0x40
on I2C bus #1:
$ modprobe lineage-pem
$ echo lineage-pem 0x40 > /sys/bus/i2c/devices/i2c-1/new_device
on I2C bus #1::
$ modprobe lineage-pem
$ echo lineage-pem 0x40 > /sys/bus/i2c/devices/i2c-1/new_device
All Lineage CPL power entry modules have a built-in I2C bus master selector
(PCA9541). To ensure device access, this driver should only be used as client
......@@ -51,6 +57,7 @@ Input voltage, input current, input power, and fan speed measurement is only
supported on newer devices. The driver detects if those attributes are supported,
and only creates respective sysfs entries if they are.
======================= ===============================
in1_input Output voltage (mV)
in1_min_alarm Output undervoltage alarm
in1_max_alarm Output overvoltage alarm
......@@ -75,3 +82,4 @@ temp1_crit
temp1_alarm
temp1_crit_alarm
temp1_fault
======================= ===============================
Documentation/hwmon/lm25066 → Documentation/hwmon/lm25066.rst
View file @ 7aefd944
......@@ -2,34 +2,62 @@ Kernel driver lm25066
=====================
Supported chips:
* TI LM25056
Prefix: 'lm25056'
Addresses scanned: -
Datasheets:
http://www.ti.com/lit/gpn/lm25056
http://www.ti.com/lit/gpn/lm25056a
* National Semiconductor LM25066
Prefix: 'lm25066'
Addresses scanned: -
Datasheets:
http://www.national.com/pf/LM/LM25066.html
http://www.national.com/pf/LM/LM25066A.html
* National Semiconductor LM5064
Prefix: 'lm5064'
Addresses scanned: -
Datasheet:
http://www.national.com/pf/LM/LM5064.html
* National Semiconductor LM5066
Prefix: 'lm5066'
Addresses scanned: -
Datasheet:
http://www.national.com/pf/LM/LM5066.html
* Texas Instruments LM5066I
Prefix: 'lm5066i'
Addresses scanned: -
Datasheet:
http://www.ti.com/product/LM5066I
Author: Guenter Roeck <linux@roeck-us.net>
......@@ -41,7 +69,7 @@ LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring,
Control, and Protection ICs.
The driver is a client driver to the core PMBus driver. Please see
Documentation/hwmon/pmbus for details on PMBus client drivers.
Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
Usage Notes
......@@ -64,6 +92,7 @@ Sysfs entries
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
======================= =======================================================
in1_label "vin"
in1_input Measured input voltage.
in1_average Average measured input voltage.
......@@ -105,3 +134,4 @@ temp1_max Maximum temperature.
temp1_crit Critical high temperature.
temp1_max_alarm Chip temperature high alarm.
temp1_crit_alarm Chip temperature critical high alarm.
======================= =======================================================
Documentation/hwmon/lm63 → Documentation/hwmon/lm63.rst
View file @ 7aefd944
......@@ -2,26 +2,43 @@ Kernel driver lm63
==================
Supported chips:
* National Semiconductor LM63
Prefix: 'lm63'
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM63.html
* National Semiconductor LM64
Prefix: 'lm64'
Addresses scanned: I2C 0x18 and 0x4e
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM64.html
* National Semiconductor LM96163
Prefix: 'lm96163'
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM96163.html
Author: Jean Delvare <jdelvare@suse.de>
Thanks go to Tyan and especially Alex Buckingham for setting up a remote
access to their S4882 test platform for this driver.
http://www.tyan.com/
Description
......@@ -32,6 +49,7 @@ and control.
The LM63 is basically an LM86 with fan speed monitoring and control
capabilities added. It misses some of the LM86 features though:
- No low limit for local temperature.
- No critical limit for local temperature.
- Critical limit for remote temperature can be changed only once. We
......
Documentation/hwmon/lm70 → Documentation/hwmon/lm70.rst
View file @ 7aefd944
......@@ -2,17 +2,28 @@ Kernel driver lm70
==================
Supported chips:
* National Semiconductor LM70
Datasheet: http://www.national.com/pf/LM/LM70.html
* Texas Instruments TMP121/TMP123
Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html
* Texas Instruments TMP122/TMP124
Information: http://www.ti.com/product/tmp122
* National Semiconductor LM71
Datasheet: http://www.ti.com/product/LM71
* National Semiconductor LM74
Datasheet: http://www.ti.com/product/LM74
Author:
Kaiwan N Billimoria <kaiwan@designergraphix.com>
......
Documentation/hwmon/lm73 → Documentation/hwmon/lm73.rst
View file @ 7aefd944
......@@ -2,13 +2,20 @@ Kernel driver lm73
==================
Supported chips:
* Texas Instruments LM73
Prefix: 'lm73'
Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4c, 0x4d, and 0x4e
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/product/lm73
Author: Guillaume Ligneul <guillaume.ligneul@gmail.com>
Documentation: Chris Verges <kg4ysn@gmail.com>
......@@ -29,17 +36,18 @@ conversion time via the 'update_interval' sysfs attribute for the
device. This attribute will normalize ranges of input values to the
maximum times defined for the resolution in the datasheet.
============= ============= ============
Resolution Conv. Time Input Range
(C/LSB) (msec) (msec)
--------------------------------------
============= ============= ============
0.25 14 0..14
0.125 28 15..28
0.0625 56 29..56
0.03125 112 57..infinity
--------------------------------------
============= ============= ============
The following examples show how the 'update_interval' attribute can be
used to change the conversion time:
used to change the conversion time::
$ echo 0 > update_interval
$ cat update_interval
......
Documentation/hwmon/lm75 → Documentation/hwmon/lm75.rst
View file @ 7aefd944
......@@ -2,67 +2,131 @@ Kernel driver lm75
==================
Supported chips:
* National Semiconductor LM75
Prefix: 'lm75'
Addresses scanned: I2C 0x48 - 0x4f
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
* National Semiconductor LM75A
Prefix: 'lm75a'
Addresses scanned: I2C 0x48 - 0x4f
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
* Dallas Semiconductor (now Maxim) DS75, DS1775, DS7505
Prefixes: 'ds75', 'ds1775', 'ds7505'
Addresses scanned: none
Datasheet: Publicly available at the Maxim website
http://www.maximintegrated.com/
* Maxim MAX6625, MAX6626, MAX31725, MAX31726
Prefixes: 'max6625', 'max6626', 'max31725', 'max31726'
Addresses scanned: none
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/
* Microchip (TelCom) TCN75
Prefix: 'tcn75'
Addresses scanned: none
Datasheet: Publicly available at the Microchip website
http://www.microchip.com/
* Microchip MCP9800, MCP9801, MCP9802, MCP9803
Prefix: 'mcp980x'
Addresses scanned: none
Datasheet: Publicly available at the Microchip website
http://www.microchip.com/
* Analog Devices ADT75
Prefix: 'adt75'
Addresses scanned: none
Datasheet: Publicly available at the Analog Devices website
http://www.analog.com/adt75
* ST Microelectronics STDS75
Prefix: 'stds75'
Addresses scanned: none
Datasheet: Publicly available at the ST website
http://www.st.com/internet/analog/product/121769.jsp
* ST Microelectronics STLM75
Prefix: 'stlm75'
Addresses scanned: none
Datasheet: Publicly available at the ST website
https://www.st.com/resource/en/datasheet/stlm75.pdf
* Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75C, TMP175, TMP275
Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75c', 'tmp275'
* Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C, TMP175, TMP275
Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75b', 'tmp75c', 'tmp275'
Addresses scanned: none
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/product/tmp100
http://www.ti.com/product/tmp101
http://www.ti.com/product/tmp105
http://www.ti.com/product/tmp112
http://www.ti.com/product/tmp75
http://www.ti.com/product/tmp75b
http://www.ti.com/product/tmp75c
http://www.ti.com/product/tmp175
http://www.ti.com/product/tmp275
* NXP LM75B
Prefix: 'lm75b'
Addresses scanned: none
Datasheet: Publicly available at the NXP website
http://www.nxp.com/documents/data_sheet/LM75B.pdf
Author: Frodo Looijaard <frodol@dds.nl>
......
Documentation/hwmon/lm77 → Documentation/hwmon/lm77.rst
View file @ 7aefd944
......@@ -2,12 +2,18 @@ Kernel driver lm77
==================
Supported chips:
* National Semiconductor LM77
Prefix: 'lm77'
Addresses scanned: I2C 0x48 - 0x4b
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
Author: Andras BALI <drewie@freemail.hu>
Description
......@@ -25,6 +31,7 @@ register on the chip, which means that the relative difference between
the limit and its hysteresis is always the same for all 3 limits.
This implementation detail implies the following:
* When setting a limit, its hysteresis will automatically follow, the
difference staying unchanged. For example, if the old critical limit
was 80 degrees C, and the hysteresis was 75 degrees C, and you change
......
Documentation/hwmon/lm78 → Documentation/hwmon/lm78.rst
View file @ 7aefd944
......@@ -2,19 +2,31 @@ Kernel driver lm78
==================
Supported chips:
* National Semiconductor LM78 / LM78-J
Prefix: 'lm78'
Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
* National Semiconductor LM79
Prefix: 'lm79'
Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
Authors: Frodo Looijaard <frodol@dds.nl>
Jean Delvare <jdelvare@suse.de>
Authors:
- Frodo Looijaard <frodol@dds.nl>
- Jean Delvare <jdelvare@suse.de>
Description
-----------
......
Documentation/hwmon/lm80 → Documentation/hwmon/lm80.rst
View file @ 7aefd944
......@@ -2,20 +2,31 @@ Kernel driver lm80
==================
Supported chips:
* National Semiconductor LM80
Prefix: 'lm80'
Addresses scanned: I2C 0x28 - 0x2f
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
* National Semiconductor LM96080
Prefix: 'lm96080'
Addresses scanned: I2C 0x28 - 0x2f
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>
Description
-----------
......
Documentation/hwmon/lm83 → Documentation/hwmon/lm83.rst
View file @ 7aefd944
......@@ -2,16 +2,24 @@ Kernel driver lm83
==================
Supported chips:
* National Semiconductor LM83
Prefix: 'lm83'
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM83.html
* National Semiconductor LM82
Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM82.html
http://www.national.com/pf/LM/LM82.html
Author: Jean Delvare <jdelvare@suse.de>
......@@ -34,13 +42,17 @@ fact that any of these motherboards do actually have an LM83, please
contact us. Note that the LM90 can easily be misdetected as a LM83.
Confirmed motherboards:
=== =====
SBS P014
SBS PSL09
=== =====
Unconfirmed motherboards:
=========== ==========
Gigabyte GA-8IK1100
Iwill MPX2
Soltek SL-75DRV5
=========== ==========
The LM82 is confirmed to have been found on most AMD Geode reference
designs and test platforms.
......
Documentation/hwmon/lm87 → Documentation/hwmon/lm87.rst
View file @ 7aefd944
......@@ -2,23 +2,32 @@ Kernel driver lm87
==================
Supported chips:
* National Semiconductor LM87
Prefix: 'lm87'
Addresses scanned: I2C 0x2c - 0x2e
Datasheet: http://www.national.com/pf/LM/LM87.html
* Analog Devices ADM1024
Prefix: 'adm1024'
Addresses scanned: I2C 0x2c - 0x2e
Datasheet: http://www.analog.com/en/prod/0,2877,ADM1024,00.html
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark Studebaker <mdsxyz123@yahoo.com>,
Stephen Rousset <stephen.rousset@rocketlogix.com>,
Dan Eaton <dan.eaton@rocketlogix.com>,
Jean Delvare <jdelvare@suse.de>,
Original 2.6 port Jeff Oliver
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Mark Studebaker <mdsxyz123@yahoo.com>,
- Stephen Rousset <stephen.rousset@rocketlogix.com>,
- Dan Eaton <dan.eaton@rocketlogix.com>,
- Jean Delvare <jdelvare@suse.de>,
- Original 2.6 port Jeff Oliver
Description
-----------
......
Documentation/hwmon/lm92 → Documentation/hwmon/lm92.rst
View file @ 7aefd944
......@@ -2,22 +2,35 @@ Kernel driver lm92
==================
Supported chips:
* National Semiconductor LM92
Prefix: 'lm92'
Addresses scanned: I2C 0x48 - 0x4b
Datasheet: http://www.national.com/pf/LM/LM92.html
* National Semiconductor LM76
Prefix: 'lm92'
Addresses scanned: none, force parameter needed
Datasheet: http://www.national.com/pf/LM/LM76.html
* Maxim MAX6633/MAX6634/MAX6635
Prefix: 'max6635'
Addresses scanned: none, force parameter needed
Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074
Authors:
Abraham van der Merwe <abraham@2d3d.co.za>
Jean Delvare <jdelvare@suse.de>
- Abraham van der Merwe <abraham@2d3d.co.za>
- Jean Delvare <jdelvare@suse.de>
Description
......
Documentation/hwmon/lochnagar.rst 0 → 100644
View file @ 7aefd944
This diff is collapsed.
Documentation/hwmon/w83793 deleted 100644 → 0
View file @ ffa6f55e
This diff is collapsed.
Documentation/hwmon/w83793.rst 0 → 100644
View file @ 7aefd944
This diff is collapsed.
Documentation/hwmon/w83795 deleted 100644 → 0
View file @ ffa6f55e
This diff is collapsed.
Documentation/hwmon/w83795.rst 0 → 100644
View file @ 7aefd944
This diff is collapsed.
Documentation/index.rst
View file @ 7aefd944
This diff is collapsed.
Documentation/thermal/sysfs-api.txt
View file @ 7aefd944
This diff is collapsed.
MAINTAINERS
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/Kconfig
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/Makefile
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/ad7414.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/adc128d818.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/adm1025.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/adm1026.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/adm1029.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/adm1031.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/adm9240.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/ads1015.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/ads7828.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/adt7411.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/adt7475.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/f71805f.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/hih6130.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/hwmon.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/iio_hwmon.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/ina209.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/ina2xx.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/ina3221.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/jc42.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/jz4740-hwmon.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/lm63.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/lm75.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/lm78.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/lm85.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/lm87.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/lm90.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/lm95241.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/lm95245.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/lochnagar-hwmon.c 0 → 100644
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/ltc4151.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/ltc4245.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/ltq-cputemp.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/max197.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/max31790.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/max6621.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/max6650.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/max6697.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/menf21bmc_hwmon.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/mlxreg-fan.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/nct7904.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/npcm750-pwm-fan.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/ntc_thermistor.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/occ/Kconfig
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/occ/Makefile
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/occ/common.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/occ/common.h
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/occ/sysfs.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pc87427.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pmbus/Kconfig
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pmbus/Makefile
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pmbus/ir38064.c 0 → 100644
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pmbus/isl68137.c 0 → 100644
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pmbus/lm25066.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pmbus/pmbus.h
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pmbus/pmbus_core.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pmbus/tps53679.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pmbus/ucd9000.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pmbus/ucd9200.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/pwm-fan.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/raspberrypi-hwmon.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/s3c-hwmon.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/sht15.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/sis5595.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/smsc47b397.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/smsc47m1.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/smsc47m192.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/stts751.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/thmc50.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/tmp102.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/tmp103.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/tmp108.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/tmp421.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/via686a.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/vt1211.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/vt8231.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/w83627hf.c
View file @ 7aefd944
This diff is collapsed.
drivers/hwmon/w83773g.c
View file @ 7aefd944
This diff is collapsed.
include/linux/hwmon.h
View file @ 7aefd944
This diff is collapsed.
include/linux/platform_data/ads7828.h
View file @ 7aefd944
This diff is collapsed.
include/linux/platform_data/ds620.h
View file @ 7aefd944
This diff is collapsed.
include/linux/platform_data/ina2xx.h
View file @ 7aefd944
This diff is collapsed.
include/linux/platform_data/max197.h
View file @ 7aefd944
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7