Merge tag 'iio-for-4.21a' of...

Merge tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing Jonathan writes: First set of new device support, features and cleanups for IIO in the 4.21 cycle Along with the headline feature of 5 new drivers, we have the substantial addition of auxilliary sensor support on the lsm6sdx parts for ST. There has also been a good set of staging cleanup in this period with more underway. An ever increasing number of devices supported with just a new ID which is a good sign that at least some manufacturers are continuing to stabilise their interfaces. New device support, * ad7124 - New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts with the inevitable DT binding. * ad7949 - New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs. * rm3100 - New driver supporting PNIs RM3100 magnometer with bindings and vendor prefix. * ti-dac7311 - New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with DT bindings. * vcnl5035 - New driver supporting the light sensor part of the VCNL4035, with DT bindings Features, * bindings - Add a generic ADC channel binding as we keep reinventing this wheel. * adc128s052 - Add IDs for additional pin compatible parts. - Add APCI ID seen on E3940 UP squared boards. * ad_sigma_delta - Allow for custom data register overiding default. * kxcjk1013 - Add KIOX0009 ACPI ID as seen on the Acer One 10. * lsm6dsx - Rework leading to... - External sensor support using the built in I2C master. - Initial support for a slave lis2mdl magnetometer. * meson-saradc - Add temperature sensor support and bindings. * st_magn - New ID for lsm9dsl_magn with bindings - New ID for lis3de accelerometer * tpl0102 - Add supprot for IIO_AVAIL_RANGE to report the range available from this device to userspace and in kernel users. Cleanups and minor fixes * tools - Allow outside specification of CFLAGS * ad2s90 - Handle and spi_read error. - Handle spi_setup failure - Drop a pointless assignment. - Prevent a potentail race by moving device registration to after all other setup. - Add missing scale attribute. - Add a sanity check on channel type before trying to read it. * ad2s1210 - Move to modern gpio descriptors. - Drop a gpioin flag which made no sense as far as we can tell. - Add dt table (bindings doc to follow when this is ready for moving out of staging). * ad5933 - Drop camel-case naming of ext_clk_hz. - White space fixes. * ad7150 - Local variable to shorten overly long line. - Alignment and line break fixes. * ad7280a - Handle an error path that was previously ignored. - Use crc8.h to build the crc table replacing custom code. - Avoid unecessary cast. - Power down the device if an error happens in probe - Use devm routines to simplify probe and remove. * ad7606 - Alignment fixes. * ad7780 - This worked as long as by coincidence an uninitialized value was 0. Lets not rely on that. - Ensure gain update is only used with the ad778x chips that actually support it. - Tidy up pattern mask generation. - Read regulator when scale is requested (which should be infrequent) as it might have changed from initialization. * ad7816 - Move to modern gpio descriptors - Don't use a busy_pin for ad7818 as there isn't one. - Ensure RD/WR and CONVST pins are outputs (previously they were brought up as inputs which doesn't seem to make any sense) - DT id table. * adc128s052 - SPDX * adt7316 - Alignment fix. - Fix data reading. When using I2C the driver never actually used the value read. This has been broken a very long time hence no rush to fix it now + the driver is undergoing a lot of cleanup. - Sanity check that the i2c read didn't fail to actually read anything. * dpot-dac - Mark a switch full through with slightly different text so that gcc doesn't warn on it. * gyro-adc - Fix a wrong file in the MAINTAINERS entry and add binding doc to the listed files. * ina2xx - Add some early returns to clarify error paths in switch. * lsm6dsx - MAINTAINERS entry. * max11100 - SPDX * max9611 - SPDX * mcp4131 - use of_device_get_match_data in preference to spi_get_device_id approach. * rcar-adc - SPDX * sc27xx - Add ADC conversion timeout support to avoid possible fault. * ssp_sensors - Don't free managed resources manually. * st-magn - Add a comment to avoid future confusion over when to use -magn postfix (on multi chip in package parts) - Add BDU register for LIS3MDL where it seems to have been missed. * st-sensors - Minor spelling, grammar etc fixes. * tpl0102 - Use a pointer rather than an index of an array to improve conciseness. * tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (80 commits) Staging: iio: adt7316: Add an extra check for 'ret' equals to 0 Staging: iio: adt7316: Fix i2c data reading, set the data field dt-bindings: iio: adc: Add docs for ad7124 iio: adc: Add ad7124 support dt-bindings: iio: adc: Add common ADCs properties to a separate file iio: ad_sigma_delta: Allow to provide custom data register address staging: iio: ad7816: Add device tree table. iio: imu: st_lsm6dsx: add entry in MAINTAINERS file iio: potentiometer: mcp4131: use of_device_get_match_data() staging: iio: adc: ad7280a: use devm_* APIs staging: iio: adc: ad7280a: power down the device on error in probe dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine iio: imu: st_lsm6dsx: add i2c embedded controller support iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap iio: imu: st_lsm6dsx: introduce locked read/write utility routines ...

Merge tag 'iio-for-4.21a' of...
Merge tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing Jonathan writes: First set of new device support, features and cleanups for IIO in the 4.21 cycle Along with the headline feature of 5 new drivers, we have the substantial addition of auxilliary sensor support on the lsm6sdx parts for ST. There has also been a good set of staging cleanup in this period with more underway. An ever increasing number of devices supported with just a new ID which is a good sign that at least some manufacturers are continuing to stabilise their interfaces. New device support, * ad7124 - New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts with the inevitable DT binding. * ad7949 - New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs. * rm3100 - New driver supporting PNIs RM3100 magnometer with bindings and vendor prefix. * ti-dac7311 - New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with DT bindings. * vcnl5035 - New driver supporting the light sensor part of the VCNL4035, with DT bindings Features, * bindings - Add a generic ADC channel binding as we keep reinventing this wheel. * adc128s052 - Add IDs for additional pin compatible parts. - Add APCI ID seen on E3940 UP squared boards. * ad_sigma_delta - Allow for custom data register overiding default. * kxcjk1013 - Add KIOX0009 ACPI ID as seen on the Acer One 10. * lsm6dsx - Rework leading to... - External sensor support using the built in I2C master. - Initial support for a slave lis2mdl magnetometer. * meson-saradc - Add temperature sensor support and bindings. * st_magn - New ID for lsm9dsl_magn with bindings - New ID for lis3de accelerometer * tpl0102 - Add supprot for IIO_AVAIL_RANGE to report the range available from this device to userspace and in kernel users. Cleanups and minor fixes * tools - Allow outside specification of CFLAGS * ad2s90 - Handle and spi_read error. - Handle spi_setup failure - Drop a pointless assignment. - Prevent a potentail race by moving device registration to after all other setup. - Add missing scale attribute. - Add a sanity check on channel type before trying to read it. * ad2s1210 - Move to modern gpio descriptors. - Drop a gpioin flag which made no sense as far as we can tell. - Add dt table (bindings doc to follow when this is ready for moving out of staging). * ad5933 - Drop camel-case naming of ext_clk_hz. - White space fixes. * ad7150 - Local variable to shorten overly long line. - Alignment and line break fixes. * ad7280a - Handle an error path that was previously ignored. - Use crc8.h to build the crc table replacing custom code. - Avoid unecessary cast. - Power down the device if an error happens in probe - Use devm routines to simplify probe and remove. * ad7606 - Alignment fixes. * ad7780 - This worked as long as by coincidence an uninitialized value was 0. Lets not rely on that. - Ensure gain update is only used with the ad778x chips that actually support it. - Tidy up pattern mask generation. - Read regulator when scale is requested (which should be infrequent) as it might have changed from initialization. * ad7816 - Move to modern gpio descriptors - Don't use a busy_pin for ad7818 as there isn't one. - Ensure RD/WR and CONVST pins are outputs (previously they were brought up as inputs which doesn't seem to make any sense) - DT id table. * adc128s052 - SPDX * adt7316 - Alignment fix. - Fix data reading. When using I2C the driver never actually used the value read. This has been broken a very long time hence no rush to fix it now + the driver is undergoing a lot of cleanup. - Sanity check that the i2c read didn't fail to actually read anything. * dpot-dac - Mark a switch full through with slightly different text so that gcc doesn't warn on it. * gyro-adc - Fix a wrong file in the MAINTAINERS entry and add binding doc to the listed files. * ina2xx - Add some early returns to clarify error paths in switch. * lsm6dsx - MAINTAINERS entry. * max11100 - SPDX * max9611 - SPDX * mcp4131 - use of_device_get_match_data in preference to spi_get_device_id approach. * rcar-adc - SPDX * sc27xx - Add ADC conversion timeout support to avoid possible fault. * ssp_sensors - Don't free managed resources manually. * st-magn - Add a comment to avoid future confusion over when to use -magn postfix (on multi chip in package parts) - Add BDU register for LIS3MDL where it seems to have been missed. * st-sensors - Minor spelling, grammar etc fixes. * tpl0102 - Use a pointer rather than an index of an array to improve conciseness. * tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (80 commits) Staging: iio: adt7316: Add an extra check for 'ret' equals to 0 Staging: iio: adt7316: Fix i2c data reading, set the data field dt-bindings: iio: adc: Add docs for ad7124 iio: adc: Add ad7124 support dt-bindings: iio: adc: Add common ADCs properties to a separate file iio: ad_sigma_delta: Allow to provide custom data register address staging: iio: ad7816: Add device tree table. iio: imu: st_lsm6dsx: add entry in MAINTAINERS file iio: potentiometer: mcp4131: use of_device_get_match_data() staging: iio: adc: ad7280a: use devm_* APIs staging: iio: adc: ad7280a: power down the device on error in probe dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine iio: imu: st_lsm6dsx: add i2c embedded controller support iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap iio: imu: st_lsm6dsx: introduce locked read/write utility routines ...
7c0bc65c · Greg Kroah-Hartman · 0e2c8fb5 · 00426e99 · 7c0bc65c · 7c0bc65c
Commit 7c0bc65c authored Nov 22, 2018 by Greg Kroah-Hartman
74 changed files
--- a/Documentation/devicetree/bindings/iio/adc/ad7949.txt
+++ b/Documentation/devicetree/bindings/iio/adc/ad7949.txt
+* Analog Devices AD7949/AD7682/AD7689
+
+Required properties:
+ - compatible: Should be one of
+	* "adi,ad7949"
+	* "adi,ad7682"
+	* "adi,ad7689"
+ - reg: spi chip select number for the device
+ - vref-supply: The regulator supply for ADC reference voltage
+
+Example:
+adc@0 {
+	compatible = "adi,ad7949";
+	reg = <0>;
+	vref-supply = <&vdd_supply>;
+};
--- a/Documentation/devicetree/bindings/iio/adc/adc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/adc.txt
+Common ADCs properties
+
+Optional properties for child nodes:
+- bipolar : Boolean, if set the channel is used in bipolar mode.
+- diff-channels : Differential channels muxed for this ADC. The first value
+		specifies the positive input pin, the second value the negative
+		input pin.
+
+Example:
+	adc@0 {
+		compatible = "some,adc";
+		...
+		channel@0 {
+			bipolar;
+			diff-channels = <0 1>;
+			...
+		};
+
+		channel@1 {
+			diff-channels = <2 3>;
+			...
+		};
+	};
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
+Analog Devices AD7124 ADC device driver
+
+Required properties for the AD7124:
+	- compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8"
+	- reg: SPI chip select number for the device
+	- spi-max-frequency: Max SPI frequency to use
+		see: Documentation/devicetree/bindings/spi/spi-bus.txt
+	- clocks: phandle to the master clock (mclk)
+		see: Documentation/devicetree/bindings/clock/clock-bindings.txt
+	- clock-names: Must be "mclk".
+	- interrupts: IRQ line for the ADC
+		see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+	  Required properties:
+		* #address-cells: Must be 1.
+		* #size-cells: Must be 0.
+
+	  Subnode(s) represent the external channels which are connected to the ADC.
+	  Each subnode represents one channel and has the following properties:
+		Required properties:
+			* reg: The channel number. It can have up to 4 channels on ad7124-4
+			  and 8 channels on ad7124-8, numbered from 0 to 15.
+			* diff-channels: see: Documentation/devicetree/bindings/iio/adc/adc.txt
+
+		Optional properties:
+			* bipolar: see: Documentation/devicetree/bindings/iio/adc/adc.txt
+			* adi,reference-select: Select the reference source to use when
+			  converting on the the specific channel. Valid values are:
+			  0: REFIN1(+)/REFIN1(−).
+			  1: REFIN2(+)/REFIN2(−).
+			  3: AVDD
+			  If this field is left empty, internal reference is selected.
+
+Optional properties:
+	- refin1-supply: refin1 supply can be used as reference for conversion.
+	- refin2-supply: refin2 supply can be used as reference for conversion.
+	- avdd-supply: avdd supply can be used as reference for conversion.
+
+Example:
+	adc@0 {
+		compatible = "adi,ad7124-4";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		interrupts = <25 2>;
+		interrupt-parent = <&gpio>;
+		refin1-supply = <&adc_vref>;
+		clocks = <&ad7124_mclk>;
+		clock-names = "mclk";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			diff-channels = <0 1>;
+			adi,reference-select = <0>;
+		};
+
+		channel@1 {
+			reg = <1>;
+			bipolar;
+			diff-channels = <2 3>;
+			adi,reference-select = <0>;
+		};
+
+		channel@2 {
+			reg = <2>;
+			diff-channels = <4 5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			diff-channels = <6 7>;
+		};
+	};
--- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.txt
@@ -22,6 +22,12 @@ Required properties:
 - vref-supply:	the regulator supply for the ADC reference voltage
 - #io-channel-cells: must be 1, see ../iio-bindings.txt

+Optional properties:
+- nvmem-cells:		phandle to the temperature_calib eFuse cells
+- nvmem-cell-names:	if present (to enable the temperature sensor
+			calibration) this must contain "temperature_calib"
+
+
 Example:
 	saradc: adc@8680 {
 		compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";

--- a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
+++ b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
 * Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip

 Required properties:
- - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021"
+ - compatible: Should be one of:
+   - "ti,adc128s052"
+   - "ti,adc122s021"
+   - "ti,adc122s051"
+   - "ti,adc122s101"
+   - "ti,adc124s021"
+   - "ti,adc124s051"
+   - "ti,adc124s101"
 - reg: spi chip select number for the device
 - vref-supply: The regulator supply for ADC reference voltage


--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.txt
+TI DAC7311 device tree bindings
+
+Required properties:
+- compatible: must be set to:
+	* "ti,dac7311"
+	* "ti,dac6311"
+	* "ti,dac5311"
+- reg: spi chip select number for the device
+- vref-supply: The regulator supply for ADC reference voltage
+
+Optional properties:
+- spi-max-frequency: Max SPI frequency to use
+
+Example:
+
+	spi_master {
+		dac@0 {
+			compatible = "ti,dac7311";
+			reg = <0>; /* CS0 */
+			spi-max-frequency = <1000000>;
+			vref-supply = <&vdd_supply>;
+		};
+	};
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -13,6 +13,7 @@ Required properties:
 Optional properties:
 - st,drdy-int-pin: the pin on the package that will be used to signal
  "data ready" (valid values: 1 or 2).
+- st,pullups : enable/disable internal i2c controller pullup resistors.
 - drive-open-drain: the interrupt/data ready line will be configured
  as open drain, which is useful if several sensors share the same
  interrupt line. This is a boolean property.

--- a/Documentation/devicetree/bindings/iio/light/vcnl4035.txt
+++ b/Documentation/devicetree/bindings/iio/light/vcnl4035.txt
+VISHAY VCNL4035 -  Ambient Light and proximity sensor
+
+Link to datasheet: https://www.vishay.com/docs/84251/vcnl4035x01.pdf
+
+Required properties:
+
+	-compatible: should be "vishay,vcnl4035"
+	-reg: I2C address of the sensor, should be 0x60
+	-interrupts: interrupt mapping for GPIO IRQ (level active low)
+
+Example:
+
+light-sensor@60 {
+	compatible = "vishay,vcnl4035";
+	reg = <0x60>;
+	interrupt-parent = <&gpio4>;
+	interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
--- a/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt
+++ b/Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt
+* PNI RM3100 3-axis magnetometer sensor
+
+Required properties:
+
+- compatible : should be "pni,rm3100"
+- reg : the I2C address or SPI chip select number of the sensor.
+
+Optional properties:
+
+- interrupts: data ready (DRDY) from the chip.
+  The interrupts can be triggered on level high.
+
+Example:
+
+rm3100: rm3100@20 {
+	compatible = "pni,rm3100";
+	reg = <0x20>;
+	interrupt-parent = <&gpio0>;
+	interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -48,6 +48,7 @@ Accelerometers:
 - st,lis3l02dq
 - st,lis2dw12
 - st,lis3dhh
+- st,lis3de

 Gyroscopes:
 - st,l3g4200d-gyro
@@ -67,6 +68,7 @@ Magnetometers:
 - st,lsm303dlm-magn
 - st,lis3mdl-magn
 - st,lis2mdl
+- st,lsm9ds1-magn

 Pressure sensors:
 - st,lps001wp-press

--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -303,6 +303,7 @@ pixcir  PIXCIR MICROELECTRONICS Co., Ltd
 plathome	Plat'Home Co., Ltd.
 plda	PLDA
 plx	Broadcom Corporation (formerly PLX Technology)
+pni	PNI Sensor Corporation
 portwell	Portwell Inc.
 poslab	Poslab Technology Co., Ltd.
 powervr	PowerVR (deprecated, use img)
@@ -415,6 +416,7 @@ vamrs	Vamrs Ltd.
 variscite	Variscite Ltd.
 via	VIA Technologies, Inc.
 virtio	Virtual I/O Device Specification, developed by the OASIS consortium
+vishay	Vishay Intertechnology, Inc
 vitesse	Vitesse Semiconductor Corporation
 vivante	Vivante Corporation
 vocore VoCore Studio

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -845,6 +845,14 @@ S:	Supported
 F:	drivers/iio/dac/ad5758.c
 F:	Documentation/devicetree/bindings/iio/dac/ad5758.txt

+ANALOG DEVICES INC AD7124 DRIVER
+M:	Stefan Popa <stefan.popa@analog.com>
+L:	linux-iio@vger.kernel.org
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/iio/adc/ad7124.c
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt
+
 ANALOG DEVICES INC AD9389B DRIVER
 M:	Hans Verkuil <hans.verkuil@cisco.com>
 L:	linux-media@vger.kernel.org
@@ -11858,6 +11866,13 @@ M:	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
 S:	Maintained
 F:	drivers/pnp/

+PNI RM3100 IIO DRIVER
+M:	Song Qiang <songqiang1304521@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/iio/magnetometer/rm3100*
+F:	Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt
+
 POSIX CLOCKS and TIMERS
 M:	Thomas Gleixner <tglx@linutronix.de>
 L:	linux-kernel@vger.kernel.org
@@ -12641,7 +12656,8 @@ RENESAS R-CAR GYROADC DRIVER
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
-F:	drivers/iio/adc/rcar_gyro_adc.c
+F:	Documentation/devicetree/bindings/iio/adc/renesas,gyroadc.txt
+F:	drivers/iio/adc/rcar-gyroadc.c

 RENESAS R-CAR I2C DRIVERS
 M:	Wolfram Sang <wsa+renesas@sang-engineering.com>
@@ -14048,6 +14064,14 @@ M:	Jan-Benedict Glaw <jbglaw@lug-owl.de>
 S:	Maintained
 F:	arch/alpha/kernel/srm_env.c

+ST LSM6DSx IMU IIO DRIVER
+M:	Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+L:	linux-iio@vger.kernel.org
+W:	http://www.st.com/
+S:	Maintained
+F:	drivers/iio/imu/st_lsm6dsx/
+F:	Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+
 ST STM32 I2C/SMBUS DRIVER
 M:	Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
 L:	linux-i2c@vger.kernel.org

--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -223,7 +223,7 @@ config IIO_ST_ACCEL_3AXIS
 	  Say yes here to build support for STMicroelectronics accelerometers:
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
 	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
-	  LNG2DM
+	  LNG2DM, LIS3DE

 	  This driver can also be built as a module. If so, these modules
 	  will be created:

--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1489,6 +1489,7 @@ static const struct acpi_device_id kx_acpi_match[] = {
 	{"KXCJ1013", KXCJK1013},
 	{"KXCJ1008", KXCJ91008},
 	{"KXCJ9000", KXCJ91008},
+	{"KIOX0009", KXTJ21009},
 	{"KIOX000A", KXCJ91008},
 	{"KXTJ1009", KXTJ21009},
 	{"SMO8500",  KXCJ91008},

--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -56,6 +56,7 @@ enum st_accel_type {
 #define LNG2DM_ACCEL_DEV_NAME		"lng2dm"
 #define LIS2DW12_ACCEL_DEV_NAME		"lis2dw12"
 #define LIS3DHH_ACCEL_DEV_NAME		"lis3dhh"
+#define LIS3DE_ACCEL_DEV_NAME		"lis3de"

 /**
 * struct st_sensors_platform_data - default accel platform data

--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -103,6 +103,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			[4] = LSM330DLC_ACCEL_DEV_NAME,
 			[5] = LSM303AGR_ACCEL_DEV_NAME,
 			[6] = LIS2DH12_ACCEL_DEV_NAME,
+			[7] = LIS3DE_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {

--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -98,6 +98,10 @@ static const struct of_device_id st_accel_of_match[] = {
 		.compatible = "st,lis2dw12",
 		.data = LIS2DW12_ACCEL_DEV_NAME,
 	},
+	{
+		.compatible = "st,lis3de",
+		.data = LIS3DE_ACCEL_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -135,6 +139,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
 	{ LIS331DL_ACCEL_DEV_NAME },
 	{ LIS3LV02DL_ACCEL_DEV_NAME },
 	{ LIS2DW12_ACCEL_DEV_NAME },
+	{ LIS3DE_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_accel_id_table);

--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -90,6 +90,10 @@ static const struct of_device_id st_accel_of_match[] = {
 		.compatible = "st,lis3dhh",
 		.data = LIS3DHH_ACCEL_DEV_NAME,
 	},
+	{
+		.compatible = "st,lis3de",
+		.data = LIS3DE_ACCEL_DEV_NAME,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -143,6 +147,7 @@ static const struct spi_device_id st_accel_id_table[] = {
 	{ LIS3LV02DL_ACCEL_DEV_NAME },
 	{ LIS2DW12_ACCEL_DEV_NAME },
 	{ LIS3DHH_ACCEL_DEV_NAME },
+	{ LIS3DE_ACCEL_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_accel_id_table);

--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -10,6 +10,17 @@ config AD_SIGMA_DELTA
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER

+config AD7124
+	tristate "Analog Devices AD7124 and similar sigma-delta ADCs driver"
+	depends on SPI_MASTER
+	select AD_SIGMA_DELTA
+	help
+	  Say yes here to build support for Analog Devices AD7124-4 and AD7124-8
+	  SPI analog to digital converters (ADC).
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ad7124.
+
 config AD7266
 	tristate "Analog Devices AD7265/AD7266 ADC driver"
 	depends on SPI_MASTER
@@ -116,6 +127,16 @@ config AD7923
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7923.

+config AD7949
+	tristate "Analog Devices AD7949 and similar ADCs driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices
+	  AD7949, AD7682, AD7689 8 Channel ADCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7949.
+
 config AD799X
 	tristate "Analog Devices AD799x ADC driver"
 	depends on I2C

--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -5,6 +5,7 @@

 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
+obj-$(CONFIG_AD7124) += ad7124.o
 obj-$(CONFIG_AD7266) += ad7266.o
 obj-$(CONFIG_AD7291) += ad7291.o
 obj-$(CONFIG_AD7298) += ad7298.o
@@ -14,6 +15,7 @@ obj-$(CONFIG_AD7766) += ad7766.o
 obj-$(CONFIG_AD7791) += ad7791.o
 obj-$(CONFIG_AD7793) += ad7793.o
 obj-$(CONFIG_AD7887) += ad7887.o
+obj-$(CONFIG_AD7949) += ad7949.o
 obj-$(CONFIG_AD799X) += ad799x.o
 obj-$(CONFIG_ASPEED_ADC) += aspeed_adc.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o

--- a/drivers/iio/adc/ad7124.c
+++ b/drivers/iio/adc/ad7124.c
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AD7124 SPI ADC driver
+ *
+ * Copyright 2018 Analog Devices Inc.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/adc/ad_sigma_delta.h>
+#include <linux/iio/sysfs.h>
+
+/* AD7124 registers */
+#define AD7124_COMMS			0x00
+#define AD7124_STATUS			0x00
+#define AD7124_ADC_CONTROL		0x01
+#define AD7124_DATA			0x02
+#define AD7124_IO_CONTROL_1		0x03
+#define AD7124_IO_CONTROL_2		0x04
+#define AD7124_ID			0x05
+#define AD7124_ERROR			0x06
+#define AD7124_ERROR_EN		0x07
+#define AD7124_MCLK_COUNT		0x08
+#define AD7124_CHANNEL(x)		(0x09 + (x))
+#define AD7124_CONFIG(x)		(0x19 + (x))
+#define AD7124_FILTER(x)		(0x21 + (x))
+#define AD7124_OFFSET(x)		(0x29 + (x))
+#define AD7124_GAIN(x)			(0x31 + (x))
+
+/* AD7124_STATUS */
+#define AD7124_STATUS_POR_FLAG_MSK	BIT(4)
+
+/* AD7124_ADC_CONTROL */
+#define AD7124_ADC_CTRL_PWR_MSK	GENMASK(7, 6)
+#define AD7124_ADC_CTRL_PWR(x)		FIELD_PREP(AD7124_ADC_CTRL_PWR_MSK, x)
+#define AD7124_ADC_CTRL_MODE_MSK	GENMASK(5, 2)
+#define AD7124_ADC_CTRL_MODE(x)	FIELD_PREP(AD7124_ADC_CTRL_MODE_MSK, x)
+
+/* AD7124_CHANNEL_X */
+#define AD7124_CHANNEL_EN_MSK		BIT(15)
+#define AD7124_CHANNEL_EN(x)		FIELD_PREP(AD7124_CHANNEL_EN_MSK, x)
+#define AD7124_CHANNEL_SETUP_MSK	GENMASK(14, 12)
+#define AD7124_CHANNEL_SETUP(x)	FIELD_PREP(AD7124_CHANNEL_SETUP_MSK, x)
+#define AD7124_CHANNEL_AINP_MSK	GENMASK(9, 5)
+#define AD7124_CHANNEL_AINP(x)		FIELD_PREP(AD7124_CHANNEL_AINP_MSK, x)
+#define AD7124_CHANNEL_AINM_MSK	GENMASK(4, 0)
+#define AD7124_CHANNEL_AINM(x)		FIELD_PREP(AD7124_CHANNEL_AINM_MSK, x)
+
+/* AD7124_CONFIG_X */
+#define AD7124_CONFIG_BIPOLAR_MSK	BIT(11)
+#define AD7124_CONFIG_BIPOLAR(x)	FIELD_PREP(AD7124_CONFIG_BIPOLAR_MSK, x)
+#define AD7124_CONFIG_REF_SEL_MSK	GENMASK(4, 3)
+#define AD7124_CONFIG_REF_SEL(x)	FIELD_PREP(AD7124_CONFIG_REF_SEL_MSK, x)
+#define AD7124_CONFIG_PGA_MSK		GENMASK(2, 0)
+#define AD7124_CONFIG_PGA(x)		FIELD_PREP(AD7124_CONFIG_PGA_MSK, x)
+
+/* AD7124_FILTER_X */
+#define AD7124_FILTER_FS_MSK		GENMASK(10, 0)
+#define AD7124_FILTER_FS(x)		FIELD_PREP(AD7124_FILTER_FS_MSK, x)
+
+enum ad7124_ids {
+	ID_AD7124_4,
+	ID_AD7124_8,
+};
+
+enum ad7124_ref_sel {
+	AD7124_REFIN1,
+	AD7124_REFIN2,
+	AD7124_INT_REF,
+	AD7124_AVDD_REF,
+};
+
+enum ad7124_power_mode {
+	AD7124_LOW_POWER,
+	AD7124_MID_POWER,
+	AD7124_FULL_POWER,
+};
+
+static const unsigned int ad7124_gain[8] = {
+	1, 2, 4, 8, 16, 32, 64, 128
+};
+
+static const int ad7124_master_clk_freq_hz[3] = {
+	[AD7124_LOW_POWER] = 76800,
+	[AD7124_MID_POWER] = 153600,
+	[AD7124_FULL_POWER] = 614400,
+};
+
+static const char * const ad7124_ref_names[] = {
+	[AD7124_REFIN1] = "refin1",
+	[AD7124_REFIN2] = "refin2",
+	[AD7124_INT_REF] = "int",
+	[AD7124_AVDD_REF] = "avdd",
+};
+
+struct ad7124_chip_info {
+	unsigned int num_inputs;
+};
+
+struct ad7124_channel_config {
+	enum ad7124_ref_sel refsel;
+	bool bipolar;
+	unsigned int ain;
+	unsigned int vref_mv;
+	unsigned int pga_bits;
+	unsigned int odr;
+};
+
+struct ad7124_state {
+	const struct ad7124_chip_info *chip_info;
+	struct ad_sigma_delta sd;
+	struct ad7124_channel_config channel_config[4];
+	struct regulator *vref[4];
+	struct clk *mclk;
+	unsigned int adc_control;
+	unsigned int num_channels;
+};
+
+static const struct iio_chan_spec ad7124_channel_template = {
+	.type = IIO_VOLTAGE,
+	.indexed = 1,
+	.differential = 1,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),
+	.scan_type = {
+		.sign = 'u',
+		.realbits = 24,
+		.storagebits = 32,
+		.shift = 8,
+		.endianness = IIO_BE,
+	},
+};
+
+static struct ad7124_chip_info ad7124_chip_info_tbl[] = {
+	[ID_AD7124_4] = {
+		.num_inputs = 8,
+	},
+	[ID_AD7124_8] = {
+		.num_inputs = 16,
+	},
+};
+
+static int ad7124_find_closest_match(const int *array,
+				     unsigned int size, int val)
+{
+	int i, idx;
+	unsigned int diff_new, diff_old;
+
+	diff_old = U32_MAX;
+	idx = 0;
+
+	for (i = 0; i < size; i++) {
+		diff_new = abs(val - array[i]);
+		if (diff_new < diff_old) {
+			diff_old = diff_new;
+			idx = i;
+		}
+	}
+
+	return idx;
+}
+
+static int ad7124_spi_write_mask(struct ad7124_state *st,
+				 unsigned int addr,
+				 unsigned long mask,
+				 unsigned int val,
+				 unsigned int bytes)
+{
+	unsigned int readval;
+	int ret;
+
+	ret = ad_sd_read_reg(&st->sd, addr, bytes, &readval);
+	if (ret < 0)
+		return ret;
+
+	readval &= ~mask;
+	readval |= val;
+
+	return ad_sd_write_reg(&st->sd, addr, bytes, readval);
+}
+
+static int ad7124_set_mode(struct ad_sigma_delta *sd,
+			   enum ad_sigma_delta_mode mode)
+{
+	struct ad7124_state *st = container_of(sd, struct ad7124_state, sd);
+
+	st->adc_control &= ~AD7124_ADC_CTRL_MODE_MSK;
+	st->adc_control |= AD7124_ADC_CTRL_MODE(mode);
+
+	return ad_sd_write_reg(&st->sd, AD7124_ADC_CONTROL, 2, st->adc_control);
+}
+
+static int ad7124_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
+{
+	struct ad7124_state *st = container_of(sd, struct ad7124_state, sd);
+	unsigned int val;
+
+	val = st->channel_config[channel].ain | AD7124_CHANNEL_EN(1) |
+	      AD7124_CHANNEL_SETUP(channel);
+
+	return ad_sd_write_reg(&st->sd, AD7124_CHANNEL(channel), 2, val);
+}
+
+static const struct ad_sigma_delta_info ad7124_sigma_delta_info = {
+	.set_channel = ad7124_set_channel,
+	.set_mode = ad7124_set_mode,
+	.has_registers = true,
+	.addr_shift = 0,
+	.read_mask = BIT(6),
+	.data_reg = AD7124_DATA,
+};
+
+static int ad7124_set_channel_odr(struct ad7124_state *st,
+				  unsigned int channel,
+				  unsigned int odr)
+{
+	unsigned int fclk, odr_sel_bits;
+	int ret;
+
+	fclk = clk_get_rate(st->mclk);
+	/*
+	 * FS[10:0] = fCLK / (fADC x 32) where:
+	 * fADC is the output data rate
+	 * fCLK is the master clock frequency
+	 * FS[10:0] are the bits in the filter register
+	 * FS[10:0] can have a value from 1 to 2047
+	 */
+	odr_sel_bits = DIV_ROUND_CLOSEST(fclk, odr * 32);
+	if (odr_sel_bits < 1)
+		odr_sel_bits = 1;
+	else if (odr_sel_bits > 2047)
+		odr_sel_bits = 2047;
+
+	ret = ad7124_spi_write_mask(st, AD7124_FILTER(channel),
+				    AD7124_FILTER_FS_MSK,
+				    AD7124_FILTER_FS(odr_sel_bits), 3);
+	if (ret < 0)
+		return ret;
+	/* fADC = fCLK / (FS[10:0] x 32) */
+	st->channel_config[channel].odr =
+		DIV_ROUND_CLOSEST(fclk, odr_sel_bits * 32);
+
+	return 0;
+}
+
+static int ad7124_set_channel_gain(struct ad7124_state *st,
+				   unsigned int channel,
+				   unsigned int gain)
+{
+	unsigned int res;
+	int ret;
+
+	res = ad7124_find_closest_match(ad7124_gain,
+					ARRAY_SIZE(ad7124_gain), gain);
+	ret = ad7124_spi_write_mask(st, AD7124_CONFIG(channel),
+				    AD7124_CONFIG_PGA_MSK,
+				    AD7124_CONFIG_PGA(res), 2);
+	if (ret < 0)
+		return ret;
+
+	st->channel_config[channel].pga_bits = res;
+
+	return 0;
+}
+
+static int ad7124_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long info)
+{
+	struct ad7124_state *st = iio_priv(indio_dev);
+	int idx, ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		ret = ad_sigma_delta_single_conversion(indio_dev, chan, val);
+		if (ret < 0)
+			return ret;
+
+		/* After the conversion is performed, disable the channel */
+		ret = ad_sd_write_reg(&st->sd,
+				      AD7124_CHANNEL(chan->address), 2,
+				      st->channel_config[chan->address].ain |
+				      AD7124_CHANNEL_EN(0));
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		idx = st->channel_config[chan->address].pga_bits;
+		*val = st->channel_config[chan->address].vref_mv;
+		if (st->channel_config[chan->address].bipolar)
+			*val2 = chan->scan_type.realbits - 1 + idx;
+		else
+			*val2 = chan->scan_type.realbits + idx;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_OFFSET:
+		if (st->channel_config[chan->address].bipolar)
+			*val = -(1 << (chan->scan_type.realbits - 1));
+		else
+			*val = 0;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = st->channel_config[chan->address].odr;
+
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad7124_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long info)
+{
+	struct ad7124_state *st = iio_priv(indio_dev);
+	unsigned int res, gain, full_scale, vref;
+
+	switch (info) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2 != 0)
+			return -EINVAL;
+
+		return ad7124_set_channel_odr(st, chan->address, val);
+	case IIO_CHAN_INFO_SCALE:
+		if (val != 0)
+			return -EINVAL;
+
+		if (st->channel_config[chan->address].bipolar)
+			full_scale = 1 << (chan->scan_type.realbits - 1);
+		else
+			full_scale = 1 << chan->scan_type.realbits;
+
+		vref = st->channel_config[chan->address].vref_mv * 1000000LL;
+		res = DIV_ROUND_CLOSEST(vref, full_scale);
+		gain = DIV_ROUND_CLOSEST(res, val2);
+
+		return ad7124_set_channel_gain(st, chan->address, gain);
+	default:
+		return -EINVAL;
+	}
+}
+
+static IIO_CONST_ATTR(in_voltage_scale_available,
+	"0.000001164 0.000002328 0.000004656 0.000009313 0.000018626 0.000037252 0.000074505 0.000149011 0.000298023");
+
+static struct attribute *ad7124_attributes[] = {
+	&iio_const_attr_in_voltage_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ad7124_attrs_group = {
+	.attrs = ad7124_attributes,
+};
+
+static const struct iio_info ad7124_info = {
+	.read_raw = ad7124_read_raw,
+	.write_raw = ad7124_write_raw,
+	.validate_trigger = ad_sd_validate_trigger,
+	.attrs = &ad7124_attrs_group,
+};
+
+static int ad7124_soft_reset(struct ad7124_state *st)
+{
+	unsigned int readval, timeout;
+	int ret;
+
+	ret = ad_sd_reset(&st->sd, 64);
+	if (ret < 0)
+		return ret;
+
+	timeout = 100;
+	do {
+		ret = ad_sd_read_reg(&st->sd, AD7124_STATUS, 1, &readval);
+		if (ret < 0)
+			return ret;
+
+		if (!(readval & AD7124_STATUS_POR_FLAG_MSK))
+			return 0;
+
+		/* The AD7124 requires typically 2ms to power up and settle */
+		usleep_range(100, 2000);
+	} while (--timeout);
+
+	dev_err(&st->sd.spi->dev, "Soft reset failed\n");
+
+	return -EIO;
+}
+
+static int ad7124_init_channel_vref(struct ad7124_state *st,
+				    unsigned int channel_number)
+{
+	unsigned int refsel = st->channel_config[channel_number].refsel;
+
+	switch (refsel) {
+	case AD7124_REFIN1:
+	case AD7124_REFIN2:
+	case AD7124_AVDD_REF:
+		if (IS_ERR(st->vref[refsel])) {
+			dev_err(&st->sd.spi->dev,
+				"Error, trying to use external voltage reference without a %s regulator.\n",
+				ad7124_ref_names[refsel]);
+				return PTR_ERR(st->vref[refsel]);
+		}
+		st->channel_config[channel_number].vref_mv =
+			regulator_get_voltage(st->vref[refsel]);
+		/* Conversion from uV to mV */
+		st->channel_config[channel_number].vref_mv /= 1000;
+		break;
+	case AD7124_INT_REF:
+		st->channel_config[channel_number].vref_mv = 2500;
+		break;
+	default:
+		dev_err(&st->sd.spi->dev, "Invalid reference %d\n", refsel);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
+					  struct device_node *np)
+{
+	struct ad7124_state *st = iio_priv(indio_dev);
+	struct device_node *child;
+	struct iio_chan_spec *chan;
+	unsigned int ain[2], channel = 0, tmp;
+	int ret;
+
+	st->num_channels = of_get_available_child_count(np);
+	if (!st->num_channels) {
+		dev_err(indio_dev->dev.parent, "no channel children\n");
+		return -ENODEV;
+	}
+
+	chan = devm_kcalloc(indio_dev->dev.parent, st->num_channels,
+			    sizeof(*chan), GFP_KERNEL);
+	if (!chan)
+		return -ENOMEM;
+
+	indio_dev->channels = chan;
+	indio_dev->num_channels = st->num_channels;
+
+	for_each_available_child_of_node(np, child) {
+		ret = of_property_read_u32(child, "reg", &channel);
+		if (ret)
+			goto err;
+
+		ret = of_property_read_u32_array(child, "diff-channels",
+						 ain, 2);
+		if (ret)
+			goto err;
+
+		if (ain[0] >= st->chip_info->num_inputs ||
+		    ain[1] >= st->chip_info->num_inputs) {
+			dev_err(indio_dev->dev.parent,
+				"Input pin number out of range.\n");
+			ret = -EINVAL;
+			goto err;
+		}
+		st->channel_config[channel].ain = AD7124_CHANNEL_AINP(ain[0]) |
+						  AD7124_CHANNEL_AINM(ain[1]);
+		st->channel_config[channel].bipolar =
+			of_property_read_bool(child, "bipolar");
+
+		ret = of_property_read_u32(child, "adi,reference-select", &tmp);
+		if (ret)
+			st->channel_config[channel].refsel = AD7124_INT_REF;
+		else
+			st->channel_config[channel].refsel = tmp;
+
+		*chan = ad7124_channel_template;
+		chan->address = channel;
+		chan->scan_index = channel;
+		chan->channel = ain[0];
+		chan->channel2 = ain[1];
+
+		chan++;
+	}
+
+	return 0;
+err:
+	of_node_put(child);
+
+	return ret;
+}
+
+static int ad7124_setup(struct ad7124_state *st)
+{
+	unsigned int val, fclk, power_mode;
+	int i, ret;
+
+	fclk = clk_get_rate(st->mclk);
+	if (!fclk)
+		return -EINVAL;
+
+	/* The power mode changes the master clock frequency */
+	power_mode = ad7124_find_closest_match(ad7124_master_clk_freq_hz,
+					ARRAY_SIZE(ad7124_master_clk_freq_hz),
+					fclk);
+	if (fclk != ad7124_master_clk_freq_hz[power_mode]) {
+		ret = clk_set_rate(st->mclk, fclk);
+		if (ret)
+			return ret;
+	}
+
+	/* Set the power mode */
+	st->adc_control &= ~AD7124_ADC_CTRL_PWR_MSK;
+	st->adc_control |= AD7124_ADC_CTRL_PWR(power_mode);
+	ret = ad_sd_write_reg(&st->sd, AD7124_ADC_CONTROL, 2, st->adc_control);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < st->num_channels; i++) {
+		val = st->channel_config[i].ain | AD7124_CHANNEL_SETUP(i);
+		ret = ad_sd_write_reg(&st->sd, AD7124_CHANNEL(i), 2, val);
+		if (ret < 0)
+			return ret;
+
+		ret = ad7124_init_channel_vref(st, i);
+		if (ret < 0)
+			return ret;
+
+		val = AD7124_CONFIG_BIPOLAR(st->channel_config[i].bipolar) |
+		      AD7124_CONFIG_REF_SEL(st->channel_config[i].refsel);
+		ret = ad_sd_write_reg(&st->sd, AD7124_CONFIG(i), 2, val);
+		if (ret < 0)
+			return ret;
+		/*
+		 * 9.38 SPS is the minimum output data rate supported
+		 * regardless of the selected power mode. Round it up to 10 and
+		 * set all the enabled channels to this default value.
+		 */
+		ret = ad7124_set_channel_odr(st, i, 10);
+	}
+
+	return ret;
+}
+
+static int ad7124_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id;
+	struct ad7124_state *st;
+	struct iio_dev *indio_dev;
+	int i, ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	id = spi_get_device_id(spi);
+	st->chip_info = &ad7124_chip_info_tbl[id->driver_data];
+
+	ad_sd_init(&st->sd, indio_dev, spi, &ad7124_sigma_delta_info);
+
+	spi_set_drvdata(spi, indio_dev);
+
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ad7124_info;
+
+	ret = ad7124_of_parse_channel_config(indio_dev, spi->dev.of_node);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(st->vref); i++) {
+		if (i == AD7124_INT_REF)
+			continue;
+
+		st->vref[i] = devm_regulator_get_optional(&spi->dev,
+						ad7124_ref_names[i]);
+		if (PTR_ERR(st->vref[i]) == -ENODEV)
+			continue;
+		else if (IS_ERR(st->vref[i]))
+			return PTR_ERR(st->vref[i]);
+
+		ret = regulator_enable(st->vref[i]);
+		if (ret)
+			return ret;
+	}
+
+	st->mclk = devm_clk_get(&spi->dev, "mclk");
+	if (IS_ERR(st->mclk)) {
+		ret = PTR_ERR(st->mclk);
+		goto error_regulator_disable;
+	}
+
+	ret = clk_prepare_enable(st->mclk);
+	if (ret < 0)
+		goto error_regulator_disable;
+
+	ret = ad7124_soft_reset(st);
+	if (ret < 0)
+		goto error_clk_disable_unprepare;
+
+	ret = ad7124_setup(st);
+	if (ret < 0)
+		goto error_clk_disable_unprepare;
+
+	ret = ad_sd_setup_buffer_and_trigger(indio_dev);
+	if (ret < 0)
+		goto error_clk_disable_unprepare;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&spi->dev, "Failed to register iio device\n");
+		goto error_remove_trigger;
+	}
+
+	return 0;
+
+error_remove_trigger:
+	ad_sd_cleanup_buffer_and_trigger(indio_dev);
+error_clk_disable_unprepare:
+	clk_disable_unprepare(st->mclk);
+error_regulator_disable:
+	for (i = ARRAY_SIZE(st->vref) - 1; i >= 0; i--) {
+		if (!IS_ERR_OR_NULL(st->vref[i]))
+			regulator_disable(st->vref[i]);
+	}
+
+	return ret;
+}
+
+static int ad7124_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ad7124_state *st = iio_priv(indio_dev);
+	int i;
+
+	iio_device_unregister(indio_dev);
+	ad_sd_cleanup_buffer_and_trigger(indio_dev);
+	clk_disable_unprepare(st->mclk);
+
+	for (i = ARRAY_SIZE(st->vref) - 1; i >= 0; i--) {
+		if (!IS_ERR_OR_NULL(st->vref[i]))
+			regulator_disable(st->vref[i]);
+	}
+
+	return 0;
+}
+
+static const struct spi_device_id ad7124_id_table[] = {
+	{ "ad7124-4", ID_AD7124_4 },
+	{ "ad7124-8", ID_AD7124_8 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ad7124_id_table);
+
+static const struct of_device_id ad7124_of_match[] = {
+	{ .compatible = "adi,ad7124-4" },
+	{ .compatible = "adi,ad7124-8" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ad7124_of_match);
+
+static struct spi_driver ad71124_driver = {
+	.driver = {
+		.name = "ad7124",
+		.of_match_table = ad7124_of_match,
+	},
+	.probe = ad7124_probe,
+	.remove	= ad7124_remove,
+	.id_table = ad7124_id_table,
+};
+module_spi_driver(ad71124_driver);
+
+MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7124 SPI driver");
+MODULE_LICENSE("GPL");
--- a/drivers/iio/adc/ad7949.c
+++ b/drivers/iio/adc/ad7949.c
+// SPDX-License-Identifier: GPL-2.0
+/* ad7949.c - Analog Devices ADC driver 14/16 bits 4/8 channels
+ *
+ * Copyright (C) 2018 CMC NV
+ *
+ * http://www.analog.com/media/en/technical-documentation/data-sheets/AD7949.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#define AD7949_MASK_CHANNEL_SEL		GENMASK(9, 7)
+#define AD7949_MASK_TOTAL		GENMASK(13, 0)
+#define AD7949_OFFSET_CHANNEL_SEL	7
+#define AD7949_CFG_READ_BACK		0x1
+#define AD7949_CFG_REG_SIZE_BITS	14
+
+enum {
+	ID_AD7949 = 0,
+	ID_AD7682,
+	ID_AD7689,
+};
+
+struct ad7949_adc_spec {
+	u8 num_channels;
+	u8 resolution;
+};
+
+static const struct ad7949_adc_spec ad7949_adc_spec[] = {
+	[ID_AD7949] = { .num_channels = 8, .resolution = 14 },
+	[ID_AD7682] = { .num_channels = 4, .resolution = 16 },
+	[ID_AD7689] = { .num_channels = 8, .resolution = 16 },
+};
+
+/**
+ * struct ad7949_adc_chip - AD ADC chip
+ * @lock: protects write sequences
+ * @vref: regulator generating Vref
+ * @iio_dev: reference to iio structure
+ * @spi: reference to spi structure
+ * @resolution: resolution of the chip
+ * @cfg: copy of the configuration register
+ * @current_channel: current channel in use
+ * @buffer: buffer to send / receive data to / from device
+ */
+struct ad7949_adc_chip {
+	struct mutex lock;
+	struct regulator *vref;
+	struct iio_dev *indio_dev;
+	struct spi_device *spi;
+	u8 resolution;
+	u16 cfg;
+	unsigned int current_channel;
+	u32 buffer ____cacheline_aligned;
+};
+
+static bool ad7949_spi_cfg_is_read_back(struct ad7949_adc_chip *ad7949_adc)
+{
+	if (!(ad7949_adc->cfg & AD7949_CFG_READ_BACK))
+		return true;
+
+	return false;
+}
+
+static int ad7949_spi_bits_per_word(struct ad7949_adc_chip *ad7949_adc)
+{
+	int ret = ad7949_adc->resolution;
+
+	if (ad7949_spi_cfg_is_read_back(ad7949_adc))
+		ret += AD7949_CFG_REG_SIZE_BITS;
+
+	return ret;
+}
+
+static int ad7949_spi_write_cfg(struct ad7949_adc_chip *ad7949_adc, u16 val,
+				u16 mask)
+{
+	int ret;
+	int bits_per_word = ad7949_spi_bits_per_word(ad7949_adc);
+	int shift = bits_per_word - AD7949_CFG_REG_SIZE_BITS;
+	struct spi_message msg;
+	struct spi_transfer tx[] = {
+		{
+			.tx_buf = &ad7949_adc->buffer,
+			.len = 4,
+			.bits_per_word = bits_per_word,
+		},
+	};
+
+	ad7949_adc->cfg = (val & mask) | (ad7949_adc->cfg & ~mask);
+	ad7949_adc->buffer = ad7949_adc->cfg << shift;
+	spi_message_init_with_transfers(&msg, tx, 1);
+	ret = spi_sync(ad7949_adc->spi, &msg);
+
+	/*
+	 * This delay is to avoid a new request before the required time to
+	 * send a new command to the device
+	 */
+	udelay(2);
+	return ret;
+}
+
+static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
+				   unsigned int channel)
+{
+	int ret;
+	int bits_per_word = ad7949_spi_bits_per_word(ad7949_adc);
+	int mask = GENMASK(ad7949_adc->resolution, 0);
+	struct spi_message msg;
+	struct spi_transfer tx[] = {
+		{
+			.rx_buf = &ad7949_adc->buffer,
+			.len = 4,
+			.bits_per_word = bits_per_word,
+		},
+	};
+
+	ret = ad7949_spi_write_cfg(ad7949_adc,
+				   channel << AD7949_OFFSET_CHANNEL_SEL,
+				   AD7949_MASK_CHANNEL_SEL);
+	if (ret)
+		return ret;
+
+	ad7949_adc->buffer = 0;
+	spi_message_init_with_transfers(&msg, tx, 1);
+	ret = spi_sync(ad7949_adc->spi, &msg);
+	if (ret)
+		return ret;
+
+	/*
+	 * This delay is to avoid a new request before the required time to
+	 * send a new command to the device
+	 */
+	udelay(2);
+
+	ad7949_adc->current_channel = channel;
+
+	if (ad7949_spi_cfg_is_read_back(ad7949_adc))
+		*val = (ad7949_adc->buffer >> AD7949_CFG_REG_SIZE_BITS) & mask;
+	else
+		*val = ad7949_adc->buffer & mask;
+
+	return 0;
+}
+
+#define AD7949_ADC_CHANNEL(chan) {				\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.channel = (chan),					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+}
+
+static const struct iio_chan_spec ad7949_adc_channels[] = {
+	AD7949_ADC_CHANNEL(0),
+	AD7949_ADC_CHANNEL(1),
+	AD7949_ADC_CHANNEL(2),
+	AD7949_ADC_CHANNEL(3),
+	AD7949_ADC_CHANNEL(4),
+	AD7949_ADC_CHANNEL(5),
+	AD7949_ADC_CHANNEL(6),
+	AD7949_ADC_CHANNEL(7),
+};
+
+static int ad7949_spi_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct ad7949_adc_chip *ad7949_adc = iio_priv(indio_dev);
+	int ret;
+
+	if (!val)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&ad7949_adc->lock);
+		ret = ad7949_spi_read_channel(ad7949_adc, val, chan->channel);
+		mutex_unlock(&ad7949_adc->lock);
+
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		ret = regulator_get_voltage(ad7949_adc->vref);
+		if (ret < 0)
+			return ret;
+
+		*val = ret / 5000;
+		return IIO_VAL_INT;
+	}
+
+	return -EINVAL;
+}
+
+static int ad7949_spi_reg_access(struct iio_dev *indio_dev,
+			unsigned int reg, unsigned int writeval,
+			unsigned int *readval)
+{
+	struct ad7949_adc_chip *ad7949_adc = iio_priv(indio_dev);
+	int ret = 0;
+
+	if (readval)
+		*readval = ad7949_adc->cfg;
+	else
+		ret = ad7949_spi_write_cfg(ad7949_adc,
+			writeval & AD7949_MASK_TOTAL, AD7949_MASK_TOTAL);
+
+	return ret;
+}
+
+static const struct iio_info ad7949_spi_info = {
+	.read_raw = ad7949_spi_read_raw,
+	.debugfs_reg_access = ad7949_spi_reg_access,
+};
+
+static int ad7949_spi_init(struct ad7949_adc_chip *ad7949_adc)
+{
+	int ret;
+	int val;
+
+	/* Sequencer disabled, CFG readback disabled, IN0 as default channel */
+	ad7949_adc->current_channel = 0;
+	ret = ad7949_spi_write_cfg(ad7949_adc, 0x3C79, AD7949_MASK_TOTAL);
+
+	/*
+	 * Do two dummy conversions to apply the first configuration setting.
+	 * Required only after the start up of the device.
+	 */
+	ad7949_spi_read_channel(ad7949_adc, &val, ad7949_adc->current_channel);
+	ad7949_spi_read_channel(ad7949_adc, &val, ad7949_adc->current_channel);
+
+	return ret;
+}
+
+static int ad7949_spi_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	const struct ad7949_adc_spec *spec;
+	struct ad7949_adc_chip *ad7949_adc;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*ad7949_adc));
+	if (!indio_dev) {
+		dev_err(dev, "can not allocate iio device\n");
+		return -ENOMEM;
+	}
+
+	indio_dev->dev.parent = dev;
+	indio_dev->dev.of_node = dev->of_node;
+	indio_dev->info = &ad7949_spi_info;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ad7949_adc_channels;
+	spi_set_drvdata(spi, indio_dev);
+
+	ad7949_adc = iio_priv(indio_dev);
+	ad7949_adc->indio_dev = indio_dev;
+	ad7949_adc->spi = spi;
+
+	spec = &ad7949_adc_spec[spi_get_device_id(spi)->driver_data];
+	indio_dev->num_channels = spec->num_channels;
+	ad7949_adc->resolution = spec->resolution;
+
+	ad7949_adc->vref = devm_regulator_get(dev, "vref");
+	if (IS_ERR(ad7949_adc->vref)) {
+		dev_err(dev, "fail to request regulator\n");
+		return PTR_ERR(ad7949_adc->vref);
+	}
+
+	ret = regulator_enable(ad7949_adc->vref);
+	if (ret < 0) {
+		dev_err(dev, "fail to enable regulator\n");
+		return ret;
+	}
+
+	mutex_init(&ad7949_adc->lock);
+
+	ret = ad7949_spi_init(ad7949_adc);
+	if (ret) {
+		dev_err(dev, "enable to init this device: %d\n", ret);
+		goto err;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(dev, "fail to register iio device: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	mutex_destroy(&ad7949_adc->lock);
+	regulator_disable(ad7949_adc->vref);
+
+	return ret;
+}
+
+static int ad7949_spi_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ad7949_adc_chip *ad7949_adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	mutex_destroy(&ad7949_adc->lock);
+	regulator_disable(ad7949_adc->vref);
+
+	return 0;
+}
+
+static const struct of_device_id ad7949_spi_of_id[] = {
+	{ .compatible = "adi,ad7949" },
+	{ .compatible = "adi,ad7682" },
+	{ .compatible = "adi,ad7689" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad7949_spi_of_id);
+
+static const struct spi_device_id ad7949_spi_id[] = {
+	{ "ad7949", ID_AD7949  },
+	{ "ad7682", ID_AD7682 },
+	{ "ad7689", ID_AD7689 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ad7949_spi_id);
+
+static struct spi_driver ad7949_spi_driver = {
+	.driver = {
+		.name		= "ad7949",
+		.of_match_table	= ad7949_spi_of_id,
+	},
+	.probe	  = ad7949_spi_probe,
+	.remove   = ad7949_spi_remove,
+	.id_table = ad7949_spi_id,
+};
+module_spi_driver(ad7949_spi_driver);
+
+MODULE_AUTHOR("Charles-Antoine Couret <charles-antoine.couret@essensium.com>");
+MODULE_DESCRIPTION("Analog Devices 14/16-bit 8-channel ADC driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -278,6 +278,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 {
 	struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
 	unsigned int sample, raw_sample;
+	unsigned int data_reg;
 	int ret = 0;

 	if (iio_buffer_enabled(indio_dev))
@@ -305,7 +306,12 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 	if (ret < 0)
 		goto out;

-	ret = ad_sd_read_reg(sigma_delta, AD_SD_REG_DATA,
+	if (sigma_delta->info->data_reg != 0)
+		data_reg = sigma_delta->info->data_reg;
+	else
+		data_reg = AD_SD_REG_DATA;
+
+	ret = ad_sd_read_reg(sigma_delta, data_reg,
 		DIV_ROUND_UP(chan->scan_type.realbits + chan->scan_type.shift, 8),
 		&raw_sample);

@@ -392,6 +398,7 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct ad_sigma_delta *sigma_delta = iio_device_get_drvdata(indio_dev);
 	unsigned int reg_size;
+	unsigned int data_reg;
 	uint8_t data[16];
 	int ret;

@@ -401,18 +408,23 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
 			indio_dev->channels[0].scan_type.shift;
 	reg_size = DIV_ROUND_UP(reg_size, 8);

+	if (sigma_delta->info->data_reg != 0)
+		data_reg = sigma_delta->info->data_reg;
+	else
+		data_reg = AD_SD_REG_DATA;
+
 	switch (reg_size) {
 	case 4:
 	case 2:
 	case 1:
-		ret = ad_sd_read_reg_raw(sigma_delta, AD_SD_REG_DATA,
-			reg_size, &data[0]);
+		ret = ad_sd_read_reg_raw(sigma_delta, data_reg, reg_size,
+			&data[0]);
 		break;
 	case 3:
 		/* We store 24 bit samples in a 32 bit word. Keep the upper
 		 * byte set to zero. */
-		ret = ad_sd_read_reg_raw(sigma_delta, AD_SD_REG_DATA,
-			reg_size, &data[1]);
+		ret = ad_sd_read_reg_raw(sigma_delta, data_reg, reg_size,
+			&data[1]);
 		break;
 	}


--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -250,6 +250,7 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
 			*val2 = chip->shunt_resistor_uohm;
 			return IIO_VAL_FRACTIONAL;
 		}
+		return -EINVAL;

 	case IIO_CHAN_INFO_HARDWAREGAIN:
 		switch (chan->address) {
@@ -262,6 +263,7 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
 			*val = chip->range_vbus == 32 ? 1 : 2;
 			return IIO_VAL_INT;
 		}
+		return -EINVAL;
 	}

 	return -EINVAL;

--- a/drivers/iio/adc/max11100.c
+++ b/drivers/iio/adc/max11100.c
+// SPDX-License-Identifier: GPL-2.0
 /*
 * iio/adc/max11100.c
 * Maxim max11100 ADC Driver with IIO interface
 *
 * Copyright (C) 2016-17 Renesas Electronics Corporation
 * Copyright (C) 2016-17 Jacopo Mondi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 #include <linux/delay.h>
 #include <linux/kernel.h>

--- a/drivers/iio/adc/max9611.c
+++ b/drivers/iio/adc/max9611.c
+// SPDX-License-Identifier: GPL-2.0
 /*
 * iio/adc/max9611.c
 *
@@ -5,10 +6,6 @@
 * 12-bit ADC interface.
 *
 * Copyright (C) 2017 Jacopo Mondi
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

 /*

--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -18,6 +18,7 @@
 #include <linux/io.h>
 #include <linux/iio/iio.h>
 #include <linux/module.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/interrupt.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
@@ -165,6 +166,14 @@

 #define MESON_SAR_ADC_MAX_FIFO_SIZE				32
 #define MESON_SAR_ADC_TIMEOUT					100 /* ms */
+#define MESON_SAR_ADC_VOLTAGE_AND_TEMP_CHANNEL			6
+#define MESON_SAR_ADC_TEMP_OFFSET				27
+
+/* temperature sensor calibration information in eFuse */
+#define MESON_SAR_ADC_EFUSE_BYTES				4
+#define MESON_SAR_ADC_EFUSE_BYTE3_UPPER_ADC_VAL			GENMASK(6, 0)
+#define MESON_SAR_ADC_EFUSE_BYTE3_IS_CALIBRATED			BIT(7)
+
 /* for use with IIO_VAL_INT_PLUS_MICRO */
 #define MILLION							1000000

@@ -175,16 +184,25 @@
 	.address = _chan,						\
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
 				BIT(IIO_CHAN_INFO_AVERAGE_RAW),		\
-	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
-				BIT(IIO_CHAN_INFO_CALIBBIAS) |		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_CALIBBIAS) |	\
 				BIT(IIO_CHAN_INFO_CALIBSCALE),		\
 	.datasheet_name = "SAR_ADC_CH"#_chan,				\
 }

-/*
- * TODO: the hardware supports IIO_TEMP for channel 6 as well which is
- * currently not supported by this driver.
- */
+#define MESON_SAR_ADC_TEMP_CHAN(_chan) {				\
+	.type = IIO_TEMP,						\
+	.channel = _chan,						\
+	.address = MESON_SAR_ADC_VOLTAGE_AND_TEMP_CHANNEL,		\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
+				BIT(IIO_CHAN_INFO_AVERAGE_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |		\
+					BIT(IIO_CHAN_INFO_SCALE),	\
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_CALIBBIAS) |	\
+				BIT(IIO_CHAN_INFO_CALIBSCALE),		\
+	.datasheet_name = "TEMP_SENSOR",				\
+}
+
 static const struct iio_chan_spec meson_sar_adc_iio_channels[] = {
 	MESON_SAR_ADC_CHAN(0),
 	MESON_SAR_ADC_CHAN(1),
@@ -197,6 +215,19 @@ static const struct iio_chan_spec meson_sar_adc_iio_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(8),
 };

+static const struct iio_chan_spec meson_sar_adc_and_temp_iio_channels[] = {
+	MESON_SAR_ADC_CHAN(0),
+	MESON_SAR_ADC_CHAN(1),
+	MESON_SAR_ADC_CHAN(2),
+	MESON_SAR_ADC_CHAN(3),
+	MESON_SAR_ADC_CHAN(4),
+	MESON_SAR_ADC_CHAN(5),
+	MESON_SAR_ADC_CHAN(6),
+	MESON_SAR_ADC_CHAN(7),
+	MESON_SAR_ADC_TEMP_CHAN(8),
+	IIO_CHAN_SOFT_TIMESTAMP(9),
+};
+
 enum meson_sar_adc_avg_mode {
 	NO_AVERAGING = 0x0,
 	MEAN_AVERAGING = 0x1,
@@ -225,6 +256,9 @@ struct meson_sar_adc_param {
 	u32					bandgap_reg;
 	unsigned int				resolution;
 	const struct regmap_config		*regmap_config;
+	u8					temperature_trimming_bits;
+	unsigned int				temperature_multiplier;
+	unsigned int				temperature_divider;
 };

 struct meson_sar_adc_data {
@@ -246,6 +280,9 @@ struct meson_sar_adc_priv {
 	struct completion			done;
 	int					calibbias;
 	int					calibscale;
+	bool					temperature_sensor_calibrated;
+	u8					temperature_sensor_coefficient;
+	u16					temperature_sensor_adc_val;
 };

 static const struct regmap_config meson_sar_adc_regmap_config_gxbb = {
@@ -389,9 +426,16 @@ static void meson_sar_adc_enable_channel(struct iio_dev *indio_dev,
 			   MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_MUX_SEL_MASK,
 			   regval);

-	if (chan->address == 6)
-		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
-				   MESON_SAR_ADC_DELTA_10_TEMP_SEL, 0);
+	if (chan->address == MESON_SAR_ADC_VOLTAGE_AND_TEMP_CHANNEL) {
+		if (chan->type == IIO_TEMP)
+			regval = MESON_SAR_ADC_DELTA_10_TEMP_SEL;
+		else
+			regval = 0;
+
+		regmap_update_bits(priv->regmap,
+				   MESON_SAR_ADC_DELTA_10,
+				   MESON_SAR_ADC_DELTA_10_TEMP_SEL, regval);
+	}
 }

 static void meson_sar_adc_set_chan7_mux(struct iio_dev *indio_dev,
@@ -506,8 +550,12 @@ static int meson_sar_adc_get_sample(struct iio_dev *indio_dev,
 				    enum meson_sar_adc_num_samples avg_samples,
 				    int *val)
 {
+	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
 	int ret;

+	if (chan->type == IIO_TEMP && !priv->temperature_sensor_calibrated)
+		return -ENOTSUPP;
+
 	ret = meson_sar_adc_lock(indio_dev);
 	if (ret)
 		return ret;
@@ -555,16 +603,30 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
 		break;

 	case IIO_CHAN_INFO_SCALE:
+		if (chan->type == IIO_VOLTAGE) {
 			ret = regulator_get_voltage(priv->vref);
 			if (ret < 0) {
 				dev_err(indio_dev->dev.parent,
-				"failed to get vref voltage: %d\n", ret);
+					"failed to get vref voltage: %d\n",
+					ret);
 				return ret;
 			}

 			*val = ret / 1000;
 			*val2 = priv->param->resolution;
 			return IIO_VAL_FRACTIONAL_LOG2;
+		} else if (chan->type == IIO_TEMP) {
+			/* SoC specific multiplier and divider */
+			*val = priv->param->temperature_multiplier;
+			*val2 = priv->param->temperature_divider;
+
+			/* celsius to millicelsius */
+			*val *= 1000;
+
+			return IIO_VAL_FRACTIONAL;
+		} else {
+			return -EINVAL;
+		}

 	case IIO_CHAN_INFO_CALIBBIAS:
 		*val = priv->calibbias;
@@ -575,6 +637,13 @@ static int meson_sar_adc_iio_info_read_raw(struct iio_dev *indio_dev,
 		*val2 = priv->calibscale % MILLION;
 		return IIO_VAL_INT_PLUS_MICRO;

+	case IIO_CHAN_INFO_OFFSET:
+		*val = DIV_ROUND_CLOSEST(MESON_SAR_ADC_TEMP_OFFSET *
+					 priv->param->temperature_divider,
+					 priv->param->temperature_multiplier);
+		*val -= priv->temperature_sensor_adc_val;
+		return IIO_VAL_INT;
+
 	default:
 		return -EINVAL;
 	}
@@ -625,6 +694,65 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev,
 	return 0;
 }

+static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
+{
+	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+	u8 *buf, trimming_bits, trimming_mask, upper_adc_val;
+	struct nvmem_cell *temperature_calib;
+	size_t read_len;
+	int ret;
+
+	temperature_calib = devm_nvmem_cell_get(&indio_dev->dev,
+						"temperature_calib");
+	if (IS_ERR(temperature_calib)) {
+		ret = PTR_ERR(temperature_calib);
+
+		/*
+		 * leave the temperature sensor disabled if no calibration data
+		 * was passed via nvmem-cells.
+		 */
+		if (ret == -ENODEV)
+			return 0;
+
+		if (ret != -EPROBE_DEFER)
+			dev_err(indio_dev->dev.parent,
+				"failed to get temperature_calib cell\n");
+
+		return ret;
+	}
+
+	read_len = MESON_SAR_ADC_EFUSE_BYTES;
+	buf = nvmem_cell_read(temperature_calib, &read_len);
+	if (IS_ERR(buf)) {
+		dev_err(indio_dev->dev.parent,
+			"failed to read temperature_calib cell\n");
+		return PTR_ERR(buf);
+	} else if (read_len != MESON_SAR_ADC_EFUSE_BYTES) {
+		kfree(buf);
+		dev_err(indio_dev->dev.parent,
+			"invalid read size of temperature_calib cell\n");
+		return -EINVAL;
+	}
+
+	trimming_bits = priv->param->temperature_trimming_bits;
+	trimming_mask = BIT(trimming_bits) - 1;
+
+	priv->temperature_sensor_calibrated =
+		buf[3] & MESON_SAR_ADC_EFUSE_BYTE3_IS_CALIBRATED;
+	priv->temperature_sensor_coefficient = buf[2] & trimming_mask;
+
+	upper_adc_val = FIELD_GET(MESON_SAR_ADC_EFUSE_BYTE3_UPPER_ADC_VAL,
+				  buf[3]);
+
+	priv->temperature_sensor_adc_val = buf[2];
+	priv->temperature_sensor_adc_val |= upper_adc_val << BITS_PER_BYTE;
+	priv->temperature_sensor_adc_val >>= trimming_bits;
+
+	kfree(buf);
+
+	return 0;
+}
+
 static int meson_sar_adc_init(struct iio_dev *indio_dev)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
@@ -649,10 +777,12 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)

 	meson_sar_adc_stop_sample_engine(indio_dev);

-	/* update the channel 6 MUX to select the temperature sensor */
+	/*
+	 * disable this bit as seems to be only relevant for Meson6 (based
+	 * on the vendor driver), which we don't support at the moment.
+	 */
 	regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
-			MESON_SAR_ADC_REG0_ADC_TEMP_SEN_SEL,
-			MESON_SAR_ADC_REG0_ADC_TEMP_SEN_SEL);
+			MESON_SAR_ADC_REG0_ADC_TEMP_SEN_SEL, 0);

 	/* disable all channels by default */
 	regmap_write(priv->regmap, MESON_SAR_ADC_CHAN_LIST, 0x0);
@@ -709,6 +839,29 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
 	regval |= MESON_SAR_ADC_AUX_SW_XP_DRIVE_SW;
 	regmap_write(priv->regmap, MESON_SAR_ADC_AUX_SW, regval);

+	if (priv->temperature_sensor_calibrated) {
+		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
+				   MESON_SAR_ADC_DELTA_10_TS_REVE1,
+				   MESON_SAR_ADC_DELTA_10_TS_REVE1);
+		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
+				   MESON_SAR_ADC_DELTA_10_TS_REVE0,
+				   MESON_SAR_ADC_DELTA_10_TS_REVE0);
+
+		/*
+		 * set bits [3:0] of the TSC (temperature sensor coefficient)
+		 * to get the correct values when reading the temperature.
+		 */
+		regval = FIELD_PREP(MESON_SAR_ADC_DELTA_10_TS_C_MASK,
+				    priv->temperature_sensor_coefficient);
+		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
+				   MESON_SAR_ADC_DELTA_10_TS_C_MASK, regval);
+	} else {
+		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
+				   MESON_SAR_ADC_DELTA_10_TS_REVE1, 0);
+		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
+				   MESON_SAR_ADC_DELTA_10_TS_REVE0, 0);
+	}
+
 	ret = clk_set_parent(priv->adc_sel_clk, priv->clkin);
 	if (ret) {
 		dev_err(indio_dev->dev.parent,
@@ -894,6 +1047,17 @@ static const struct meson_sar_adc_param meson_sar_adc_meson8_param = {
 	.bandgap_reg = MESON_SAR_ADC_DELTA_10,
 	.regmap_config = &meson_sar_adc_regmap_config_meson8,
 	.resolution = 10,
+	.temperature_trimming_bits = 4,
+	.temperature_multiplier = 18 * 10000,
+	.temperature_divider = 1024 * 10 * 85,
+};
+
+static const struct meson_sar_adc_param meson_sar_adc_meson8b_param = {
+	.has_bl30_integration = false,
+	.clock_rate = 1150000,
+	.bandgap_reg = MESON_SAR_ADC_DELTA_10,
+	.regmap_config = &meson_sar_adc_regmap_config_meson8,
+	.resolution = 10,
 };

 static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = {
@@ -918,12 +1082,12 @@ static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
 };

 static const struct meson_sar_adc_data meson_sar_adc_meson8b_data = {
-	.param = &meson_sar_adc_meson8_param,
+	.param = &meson_sar_adc_meson8b_param,
 	.name = "meson-meson8b-saradc",
 };

 static const struct meson_sar_adc_data meson_sar_adc_meson8m2_data = {
-	.param = &meson_sar_adc_meson8_param,
+	.param = &meson_sar_adc_meson8b_param,
 	.name = "meson-meson8m2-saradc",
 };

@@ -1009,9 +1173,6 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &meson_sar_adc_iio_info;

-	indio_dev->channels = meson_sar_adc_iio_channels;
-	indio_dev->num_channels = ARRAY_SIZE(meson_sar_adc_iio_channels);
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(base))
@@ -1078,6 +1239,22 @@ static int meson_sar_adc_probe(struct platform_device *pdev)

 	priv->calibscale = MILLION;

+	if (priv->param->temperature_trimming_bits) {
+		ret = meson_sar_adc_temp_sensor_init(indio_dev);
+		if (ret)
+			return ret;
+	}
+
+	if (priv->temperature_sensor_calibrated) {
+		indio_dev->channels = meson_sar_adc_and_temp_iio_channels;
+		indio_dev->num_channels =
+			ARRAY_SIZE(meson_sar_adc_and_temp_iio_channels);
+	} else {
+		indio_dev->channels = meson_sar_adc_iio_channels;
+		indio_dev->num_channels =
+			ARRAY_SIZE(meson_sar_adc_iio_channels);
+	}
+
 	ret = meson_sar_adc_init(indio_dev);
 	if (ret)
 		goto err;

--- a/drivers/iio/adc/rcar-gyroadc.c
+++ b/drivers/iio/adc/rcar-gyroadc.c
+// SPDX-License-Identifier: GPL-2.0+
 /*
 * Renesas R-Car GyroADC driver
 *
 * Copyright 2016 Marek Vasut <marek.vasut@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
 */

 #include <linux/module.h>

--- a/drivers/iio/adc/sc27xx_adc.c
+++ b/drivers/iio/adc/sc27xx_adc.c
@@ -52,6 +52,9 @@
 /* Timeout (ms) for the trylock of hardware spinlocks */
 #define SC27XX_ADC_HWLOCK_TIMEOUT	5000

+/* Timeout (ms) for ADC data conversion according to ADC datasheet */
+#define SC27XX_ADC_RDY_TIMEOUT		100
+
 /* Maximum ADC channel number */
 #define SC27XX_ADC_CHANNEL_MAX		32

@@ -223,7 +226,14 @@ static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
 	if (ret)
 		goto disable_adc;

-	wait_for_completion(&data->completion);
+	ret = wait_for_completion_timeout(&data->completion,
+				msecs_to_jiffies(SC27XX_ADC_RDY_TIMEOUT));
+	if (!ret) {
+		dev_err(data->dev, "read ADC data timeout\n");
+		ret = -ETIMEDOUT;
+	} else {
+		ret = 0;
+	}

 disable_adc:
 	regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,

--- a/drivers/iio/adc/ti-adc128s052.c
+++ b/drivers/iio/adc/ti-adc128s052.c
+// SPDX-License-Identifier: GPL-2.0
 /*
 * Copyright (C) 2014 Angelo Compagnucci <angelo.compagnucci@gmail.com>
 *
@@ -6,16 +7,14 @@
 * http://www.ti.com/lit/ds/symlink/adc128s052.pdf
 * http://www.ti.com/lit/ds/symlink/adc122s021.pdf
 * http://www.ti.com/lit/ds/symlink/adc124s021.pdf
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */

+#include <linux/acpi.h>
 #include <linux/err.h>
 #include <linux/spi/spi.h>
 #include <linux/module.h>
 #include <linux/iio/iio.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>

 struct adc128_configuration {
@@ -135,10 +134,15 @@ static const struct iio_info adc128_info = {
 static int adc128_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
+	unsigned int config;
 	struct adc128 *adc;
-	int config = spi_get_device_id(spi)->driver_data;
 	int ret;

+	if (dev_fwnode(&spi->dev))
+		config = (unsigned long) device_get_match_data(&spi->dev);
+	else
+		config = spi_get_device_id(spi)->driver_data;
+
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -186,23 +190,40 @@ static int adc128_remove(struct spi_device *spi)
 static const struct of_device_id adc128_of_match[] = {
 	{ .compatible = "ti,adc128s052", },
 	{ .compatible = "ti,adc122s021", },
+	{ .compatible = "ti,adc122s051", },
+	{ .compatible = "ti,adc122s101", },
 	{ .compatible = "ti,adc124s021", },
+	{ .compatible = "ti,adc124s051", },
+	{ .compatible = "ti,adc124s101", },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, adc128_of_match);

 static const struct spi_device_id adc128_id[] = {
-	{ "adc128s052", 0},	/* index into adc128_config */
-	{ "adc122s021",	1},
-	{ "adc124s021", 2},
+	{ "adc128s052", 0 },	/* index into adc128_config */
+	{ "adc122s021",	1 },
+	{ "adc122s051",	1 },
+	{ "adc122s101",	1 },
+	{ "adc124s021", 2 },
+	{ "adc124s051", 2 },
+	{ "adc124s101", 2 },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, adc128_id);

+#ifdef CONFIG_ACPI
+static const struct acpi_device_id adc128_acpi_match[] = {
+	{ "AANT1280", 2 }, /* ADC124S021 compatible ACPI ID */
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, adc128_acpi_match);
+#endif
+
 static struct spi_driver adc128_driver = {
 	.driver = {
 		.name = "adc128s052",
 		.of_match_table = of_match_ptr(adc128_of_match),
+		.acpi_match_table = ACPI_PTR(adc128_acpi_match),
 	},
 	.probe = adc128_probe,
 	.remove = adc128_remove,

--- a/drivers/iio/common/ssp_sensors/ssp_dev.c
+++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
@@ -462,43 +462,35 @@ static struct ssp_data *ssp_parse_dt(struct device *dev)

 	data->mcu_ap_gpio = of_get_named_gpio(node, "mcu-ap-gpios", 0);
 	if (data->mcu_ap_gpio < 0)
-		goto err_free_pd;
+		return NULL;

 	data->ap_mcu_gpio = of_get_named_gpio(node, "ap-mcu-gpios", 0);
 	if (data->ap_mcu_gpio < 0)
-		goto err_free_pd;
+		return NULL;

 	data->mcu_reset_gpio = of_get_named_gpio(node, "mcu-reset-gpios", 0);
 	if (data->mcu_reset_gpio < 0)
-		goto err_free_pd;
+		return NULL;

 	ret = devm_gpio_request_one(dev, data->ap_mcu_gpio, GPIOF_OUT_INIT_HIGH,
 				    "ap-mcu-gpios");
 	if (ret)
-		goto err_free_pd;
+		return NULL;

 	ret = devm_gpio_request_one(dev, data->mcu_reset_gpio,
 				    GPIOF_OUT_INIT_HIGH, "mcu-reset-gpios");
 	if (ret)
-		goto err_ap_mcu;
+		return NULL;

 	match = of_match_node(ssp_of_match, node);
 	if (!match)
-		goto err_mcu_reset_gpio;
+		return NULL;

 	data->sensorhub_info = match->data;

 	dev_set_drvdata(dev, data);

 	return data;
-
-err_mcu_reset_gpio:
-	devm_gpio_free(dev, data->mcu_reset_gpio);
-err_ap_mcu:
-	devm_gpio_free(dev, data->ap_mcu_gpio);
-err_free_pd:
-	devm_kfree(dev, data);
-	return NULL;
 }
 #else
 static struct ssp_data *ssp_parse_dt(struct device *pdev)

--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -133,7 +133,7 @@ static int st_sensors_match_fs(struct st_sensor_settings *sensor_settings,

 	for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
 		if (sensor_settings->fs.fs_avl[i].num == 0)
-			goto st_sensors_match_odr_error;
+			return ret;

 		if (sensor_settings->fs.fs_avl[i].num == fs) {
 			*index_fs_avl = i;
@@ -142,7 +142,6 @@ static int st_sensors_match_fs(struct st_sensor_settings *sensor_settings,
 		}
 	}

-st_sensors_match_odr_error:
 	return ret;
 }


--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -104,7 +104,7 @@ static irqreturn_t st_sensors_irq_thread(int irq, void *p)
 		return IRQ_HANDLED;

 	/*
-	 * If we are using egde IRQs, new samples arrived while processing
+	 * If we are using edge IRQs, new samples arrived while processing
 	 * the IRQ and those may be missed unless we pick them here, so poll
 	 * again. If the sensor delivery frequency is very high, this thread
 	 * turns into a polled loop handler.
@@ -148,7 +148,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 		if (!sdata->sensor_settings->drdy_irq.addr_ihl) {
 			dev_err(&indio_dev->dev,
 				"falling/low specified for IRQ "
-				"but hardware only support rising/high: "
+				"but hardware supports only rising/high: "
 				"will request rising/high\n");
 			if (irq_trig == IRQF_TRIGGER_FALLING)
 				irq_trig = IRQF_TRIGGER_RISING;

--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -366,6 +366,15 @@ config TI_DAC5571

 	  If compiled as a module, it will be called ti-dac5571.

+config TI_DAC7311
+	tristate "Texas Instruments 8/10/12-bit 1-channel DAC driver"
+	depends on SPI
+	help
+	  Driver for the Texas Instruments
+	  DAC7311, DAC6311, DAC5311.
+
+	  If compiled as a module, it will be called ti-dac7311.
+
 config VF610_DAC
 	tristate "Vybrid vf610 DAC driver"
 	depends on OF

--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -40,4 +40,5 @@ obj-$(CONFIG_STM32_DAC_CORE) += stm32-dac-core.o
 obj-$(CONFIG_STM32_DAC) += stm32-dac.o
 obj-$(CONFIG_TI_DAC082S085) += ti-dac082s085.o
 obj-$(CONFIG_TI_DAC5571) += ti-dac5571.o
+obj-$(CONFIG_TI_DAC7311) += ti-dac7311.o
 obj-$(CONFIG_VF610_DAC) += vf610_dac.o
--- a/drivers/iio/dac/dpot-dac.c
+++ b/drivers/iio/dac/dpot-dac.c
@@ -74,11 +74,11 @@ static int dpot_dac_read_raw(struct iio_dev *indio_dev,
 		case IIO_VAL_INT:
 			/*
 			 * Convert integer scale to fractional scale by
-			 * setting the denominator (val2) to one...
+			 * setting the denominator (val2) to one, and...
 			 */
 			*val2 = 1;
 			ret = IIO_VAL_FRACTIONAL;
-			/* ...and fall through. */
+			/* fall through */
 		case IIO_VAL_FRACTIONAL:
 			*val *= regulator_get_voltage(dac->vref) / 1000;
 			*val2 *= dac->max_ohms;

--- a/drivers/iio/dac/ti-dac7311.c
+++ b/drivers/iio/dac/ti-dac7311.c
+// SPDX-License-Identifier: GPL-2.0
+/* ti-dac7311.c - Texas Instruments 8/10/12-bit 1-channel DAC driver
+ *
+ * Copyright (C) 2018 CMC NV
+ *
+ * http://www.ti.com/lit/ds/symlink/dac7311.pdf
+ */
+
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+enum {
+	ID_DAC5311 = 0,
+	ID_DAC6311,
+	ID_DAC7311,
+};
+
+enum {
+	POWER_1KOHM_TO_GND = 0,
+	POWER_100KOHM_TO_GND,
+	POWER_TRI_STATE,
+};
+
+struct ti_dac_spec {
+	u8 resolution;
+};
+
+static const struct ti_dac_spec ti_dac_spec[] = {
+	[ID_DAC5311] = { .resolution = 8 },
+	[ID_DAC6311] = { .resolution = 10 },
+	[ID_DAC7311] = { .resolution = 12 },
+};
+
+/**
+ * struct ti_dac_chip - TI DAC chip
+ * @lock: protects write sequences
+ * @vref: regulator generating Vref
+ * @spi: SPI device to send data to the device
+ * @val: cached value
+ * @powerdown: whether the chip is powered down
+ * @powerdown_mode: selected by the user
+ * @resolution: resolution of the chip
+ * @buf: buffer for transfer data
+ */
+struct ti_dac_chip {
+	struct mutex lock;
+	struct regulator *vref;
+	struct spi_device *spi;
+	u16 val;
+	bool powerdown;
+	u8 powerdown_mode;
+	u8 resolution;
+	u8 buf[2] ____cacheline_aligned;
+};
+
+static u8 ti_dac_get_power(struct ti_dac_chip *ti_dac, bool powerdown)
+{
+	if (powerdown)
+		return ti_dac->powerdown_mode + 1;
+
+	return 0;
+}
+
+static int ti_dac_cmd(struct ti_dac_chip *ti_dac, u8 power, u16 val)
+{
+	u8 shift = 14 - ti_dac->resolution;
+
+	ti_dac->buf[0] = (val << shift) & 0xFF;
+	ti_dac->buf[1] = (power << 6) | (val >> (8 - shift));
+	return spi_write(ti_dac->spi, ti_dac->buf, 2);
+}
+
+static const char * const ti_dac_powerdown_modes[] = {
+	"1kohm_to_gnd",
+	"100kohm_to_gnd",
+	"three_state",
+};
+
+static int ti_dac_get_powerdown_mode(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan)
+{
+	struct ti_dac_chip *ti_dac = iio_priv(indio_dev);
+
+	return ti_dac->powerdown_mode;
+}
+
+static int ti_dac_set_powerdown_mode(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     unsigned int mode)
+{
+	struct ti_dac_chip *ti_dac = iio_priv(indio_dev);
+
+	ti_dac->powerdown_mode = mode;
+	return 0;
+}
+
+static const struct iio_enum ti_dac_powerdown_mode = {
+	.items = ti_dac_powerdown_modes,
+	.num_items = ARRAY_SIZE(ti_dac_powerdown_modes),
+	.get = ti_dac_get_powerdown_mode,
+	.set = ti_dac_set_powerdown_mode,
+};
+
+static ssize_t ti_dac_read_powerdown(struct iio_dev *indio_dev,
+				     uintptr_t private,
+				     const struct iio_chan_spec *chan,
+				     char *buf)
+{
+	struct ti_dac_chip *ti_dac = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n", ti_dac->powerdown);
+}
+
+static ssize_t ti_dac_write_powerdown(struct iio_dev *indio_dev,
+				      uintptr_t private,
+				      const struct iio_chan_spec *chan,
+				      const char *buf, size_t len)
+{
+	struct ti_dac_chip *ti_dac = iio_priv(indio_dev);
+	bool powerdown;
+	u8 power;
+	int ret;
+
+	ret = strtobool(buf, &powerdown);
+	if (ret)
+		return ret;
+
+	power = ti_dac_get_power(ti_dac, powerdown);
+
+	mutex_lock(&ti_dac->lock);
+	ret = ti_dac_cmd(ti_dac, power, 0);
+	if (!ret)
+		ti_dac->powerdown = powerdown;
+	mutex_unlock(&ti_dac->lock);
+
+	return ret ? ret : len;
+}
+
+static const struct iio_chan_spec_ext_info ti_dac_ext_info[] = {
+	{
+		.name	   = "powerdown",
+		.read	   = ti_dac_read_powerdown,
+		.write	   = ti_dac_write_powerdown,
+		.shared	   = IIO_SHARED_BY_TYPE,
+	},
+	IIO_ENUM("powerdown_mode", IIO_SHARED_BY_TYPE, &ti_dac_powerdown_mode),
+	IIO_ENUM_AVAILABLE("powerdown_mode", &ti_dac_powerdown_mode),
+	{ },
+};
+
+#define TI_DAC_CHANNEL(chan) {					\
+	.type = IIO_VOLTAGE,					\
+	.channel = (chan),					\
+	.output = true,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	.ext_info = ti_dac_ext_info,				\
+}
+
+static const struct iio_chan_spec ti_dac_channels[] = {
+	TI_DAC_CHANNEL(0),
+};
+
+static int ti_dac_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct ti_dac_chip *ti_dac = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		*val = ti_dac->val;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		ret = regulator_get_voltage(ti_dac->vref);
+		if (ret < 0)
+			return ret;
+
+		*val = ret / 1000;
+		*val2 = ti_dac->resolution;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	}
+
+	return -EINVAL;
+}
+
+static int ti_dac_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct ti_dac_chip *ti_dac = iio_priv(indio_dev);
+	u8 power = ti_dac_get_power(ti_dac, ti_dac->powerdown);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (ti_dac->val == val)
+			return 0;
+
+		if (val >= (1 << ti_dac->resolution) || val < 0)
+			return -EINVAL;
+
+		if (ti_dac->powerdown)
+			return -EBUSY;
+
+		mutex_lock(&ti_dac->lock);
+		ret = ti_dac_cmd(ti_dac, power, val);
+		if (!ret)
+			ti_dac->val = val;
+		mutex_unlock(&ti_dac->lock);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int ti_dac_write_raw_get_fmt(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan, long mask)
+{
+	return IIO_VAL_INT;
+}
+
+static const struct iio_info ti_dac_info = {
+	.read_raw	   = ti_dac_read_raw,
+	.write_raw	   = ti_dac_write_raw,
+	.write_raw_get_fmt = ti_dac_write_raw_get_fmt,
+};
+
+static int ti_dac_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	const struct ti_dac_spec *spec;
+	struct ti_dac_chip *ti_dac;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*ti_dac));
+	if (!indio_dev) {
+		dev_err(dev, "can not allocate iio device\n");
+		return -ENOMEM;
+	}
+
+	spi->mode = SPI_MODE_1;
+	spi->bits_per_word = 16;
+	spi_setup(spi);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->dev.of_node = spi->dev.of_node;
+	indio_dev->info = &ti_dac_info;
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ti_dac_channels;
+	spi_set_drvdata(spi, indio_dev);
+
+	ti_dac = iio_priv(indio_dev);
+	ti_dac->powerdown = false;
+	ti_dac->spi = spi;
+
+	spec = &ti_dac_spec[spi_get_device_id(spi)->driver_data];
+	indio_dev->num_channels = 1;
+	ti_dac->resolution = spec->resolution;
+
+	ti_dac->vref = devm_regulator_get(dev, "vref");
+	if (IS_ERR(ti_dac->vref)) {
+		dev_err(dev, "error to get regulator\n");
+		return PTR_ERR(ti_dac->vref);
+	}
+
+	ret = regulator_enable(ti_dac->vref);
+	if (ret < 0) {
+		dev_err(dev, "can not enable regulator\n");
+		return ret;
+	}
+
+	mutex_init(&ti_dac->lock);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(dev, "fail to register iio device: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+
+err:
+	mutex_destroy(&ti_dac->lock);
+	regulator_disable(ti_dac->vref);
+	return ret;
+}
+
+static int ti_dac_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ti_dac_chip *ti_dac = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	mutex_destroy(&ti_dac->lock);
+	regulator_disable(ti_dac->vref);
+	return 0;
+}
+
+static const struct of_device_id ti_dac_of_id[] = {
+	{ .compatible = "ti,dac5311" },
+	{ .compatible = "ti,dac6311" },
+	{ .compatible = "ti,dac7311" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ti_dac_of_id);
+
+static const struct spi_device_id ti_dac_spi_id[] = {
+	{ "dac5311", ID_DAC5311  },
+	{ "dac6311", ID_DAC6311 },
+	{ "dac7311", ID_DAC7311 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ti_dac_spi_id);
+
+static struct spi_driver ti_dac_driver = {
+	.driver = {
+		.name		= "ti-dac7311",
+		.of_match_table	= ti_dac_of_id,
+	},
+	.probe	  = ti_dac_probe,
+	.remove   = ti_dac_remove,
+	.id_table = ti_dac_spi_id,
+};
+module_spi_driver(ti_dac_driver);
+
+MODULE_AUTHOR("Charles-Antoine Couret <charles-antoine.couret@essensium.com>");
+MODULE_DESCRIPTION("Texas Instruments 8/10/12-bit 1-channel DAC driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/imu/st_lsm6dsx/Makefile
+++ b/drivers/iio/imu/st_lsm6dsx/Makefile
-st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o
+st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
+		st_lsm6dsx_shub.o

 obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
 obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o

--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -43,6 +43,24 @@ enum st_lsm6dsx_hw_id {
 					 * ST_LSM6DSX_TAGGED_SAMPLE_SIZE)
 #define ST_LSM6DSX_SHIFT_VAL(val, mask)	(((val) << __ffs(mask)) & (mask))

+#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx)		\
+{									\
+	.type = chan_type,						\
+	.address = addr,						\
+	.modified = 1,							\
+	.channel2 = mod,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
+			      BIT(IIO_CHAN_INFO_SCALE),			\
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
+	.scan_index = scan_idx,						\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 16,						\
+		.storagebits = 16,					\
+		.endianness = IIO_LE,					\
+	},								\
+}
+
 struct st_lsm6dsx_reg {
 	u8 addr;
 	u8 mask;
@@ -50,6 +68,28 @@ struct st_lsm6dsx_reg {

 struct st_lsm6dsx_hw;

+struct st_lsm6dsx_odr {
+	u16 hz;
+	u8 val;
+};
+
+#define ST_LSM6DSX_ODR_LIST_SIZE	6
+struct st_lsm6dsx_odr_table_entry {
+	struct st_lsm6dsx_reg reg;
+	struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE];
+};
+
+struct st_lsm6dsx_fs {
+	u32 gain;
+	u8 val;
+};
+
+#define ST_LSM6DSX_FS_LIST_SIZE		4
+struct st_lsm6dsx_fs_table_entry {
+	struct st_lsm6dsx_reg reg;
+	struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE];
+};
+
 /**
 * struct st_lsm6dsx_fifo_ops - ST IMU FIFO settings
 * @read_fifo: Read FIFO callback.
@@ -84,6 +124,70 @@ struct st_lsm6dsx_hw_ts_settings {
 	struct st_lsm6dsx_reg decimator;
 };

+/**
+ * struct st_lsm6dsx_shub_settings - ST IMU hw i2c controller settings
+ * @page_mux: register page mux info (addr + mask).
+ * @master_en: master config register info (addr + mask).
+ * @pullup_en: i2c controller pull-up register info (addr + mask).
+ * @aux_sens: aux sensor register info (addr + mask).
+ * @wr_once: write_once register info (addr + mask).
+ * @shub_out: sensor hub first output register info.
+ * @slv0_addr: slave0 address in secondary page.
+ * @dw_slv0_addr: slave0 write register address in secondary page.
+ * @batch_en: Enable/disable FIFO batching.
+ */
+struct st_lsm6dsx_shub_settings {
+	struct st_lsm6dsx_reg page_mux;
+	struct st_lsm6dsx_reg master_en;
+	struct st_lsm6dsx_reg pullup_en;
+	struct st_lsm6dsx_reg aux_sens;
+	struct st_lsm6dsx_reg wr_once;
+	u8 shub_out;
+	u8 slv0_addr;
+	u8 dw_slv0_addr;
+	u8 batch_en;
+};
+
+enum st_lsm6dsx_ext_sensor_id {
+	ST_LSM6DSX_ID_MAGN,
+};
+
+/**
+ * struct st_lsm6dsx_ext_dev_settings - i2c controller slave settings
+ * @i2c_addr: I2c slave address list.
+ * @wai: Wai address info.
+ * @id: external sensor id.
+ * @odr: Output data rate of the sensor [Hz].
+ * @gain: Configured sensor sensitivity.
+ * @temp_comp: Temperature compensation register info (addr + mask).
+ * @pwr_table: Power on register info (addr + mask).
+ * @off_canc: Offset cancellation register info (addr + mask).
+ * @bdu: Block data update register info (addr + mask).
+ * @out: Output register info.
+ */
+struct st_lsm6dsx_ext_dev_settings {
+	u8 i2c_addr[2];
+	struct {
+		u8 addr;
+		u8 val;
+	} wai;
+	enum st_lsm6dsx_ext_sensor_id id;
+	struct st_lsm6dsx_odr_table_entry odr_table;
+	struct st_lsm6dsx_fs_table_entry fs_table;
+	struct st_lsm6dsx_reg temp_comp;
+	struct {
+		struct st_lsm6dsx_reg reg;
+		u8 off_val;
+		u8 on_val;
+	} pwr_table;
+	struct st_lsm6dsx_reg off_canc;
+	struct st_lsm6dsx_reg bdu;
+	struct {
+		u8 addr;
+		u8 len;
+	} out;
+};
+
 /**
 * struct st_lsm6dsx_settings - ST IMU sensor settings
 * @wai: Sensor WhoAmI default value.
@@ -93,6 +197,7 @@ struct st_lsm6dsx_hw_ts_settings {
 * @batch: List of FIFO batching register info (addr + mask).
 * @fifo_ops: Sensor hw FIFO parameters.
 * @ts_settings: Hw timer related settings.
+ * @shub_settings: i2c controller related settings.
 */
 struct st_lsm6dsx_settings {
 	u8 wai;
@@ -102,11 +207,15 @@ struct st_lsm6dsx_settings {
 	struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
 	struct st_lsm6dsx_fifo_ops fifo_ops;
 	struct st_lsm6dsx_hw_ts_settings ts_settings;
+	struct st_lsm6dsx_shub_settings shub_settings;
 };

 enum st_lsm6dsx_sensor_id {
-	ST_LSM6DSX_ID_ACC,
 	ST_LSM6DSX_ID_GYRO,
+	ST_LSM6DSX_ID_ACC,
+	ST_LSM6DSX_ID_EXT0,
+	ST_LSM6DSX_ID_EXT1,
+	ST_LSM6DSX_ID_EXT2,
 	ST_LSM6DSX_ID_MAX,
 };

@@ -126,6 +235,7 @@ enum st_lsm6dsx_fifo_mode {
 * @sip: Number of samples in a given pattern.
 * @decimator: FIFO decimation factor.
 * @ts_ref: Sensor timestamp reference for hw one.
+ * @ext_info: Sensor settings if it is connected to i2c controller
 */
 struct st_lsm6dsx_sensor {
 	char name[32];
@@ -139,6 +249,11 @@ struct st_lsm6dsx_sensor {
 	u8 sip;
 	u8 decimator;
 	s64 ts_ref;
+
+	struct {
+		const struct st_lsm6dsx_ext_dev_settings *settings;
+		u8 addr;
+	} ext_info;
 };

 /**
@@ -148,6 +263,7 @@ struct st_lsm6dsx_sensor {
 * @irq: Device interrupt line (I2C or SPI).
 * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
 * @conf_lock: Mutex to prevent concurrent FIFO configuration update.
+ * @page_lock: Mutex to prevent concurrent memory page configuration.
 * @fifo_mode: FIFO operating mode supported by the device.
 * @enable_mask: Enabled sensor bitmask.
 * @ts_sip: Total number of timestamp samples in a given pattern.
@@ -163,6 +279,7 @@ struct st_lsm6dsx_hw {

 	struct mutex fifo_lock;
 	struct mutex conf_lock;
+	struct mutex page_lock;

 	enum st_lsm6dsx_fifo_mode fifo_mode;
 	u8 enable_mask;
@@ -176,13 +293,15 @@ struct st_lsm6dsx_hw {
 	const struct st_lsm6dsx_settings *settings;
 };

+static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
 extern const struct dev_pm_ops st_lsm6dsx_pm_ops;

 int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
 		     struct regmap *regmap);
-int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor);
-int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor);
+int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
+				 bool enable);
 int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw);
+int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val);
 int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor,
 				u16 watermark);
 int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw);
@@ -191,5 +310,47 @@ int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
 int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw);
 int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw);
 int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val);
+int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name);
+int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable);
+int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable);
+
+static inline int
+st_lsm6dsx_update_bits_locked(struct st_lsm6dsx_hw *hw, unsigned int addr,
+			      unsigned int mask, unsigned int val)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = regmap_update_bits(hw->regmap, addr, mask, val);
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+static inline int
+st_lsm6dsx_read_locked(struct st_lsm6dsx_hw *hw, unsigned int addr,
+		       void *val, unsigned int len)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = regmap_bulk_read(hw->regmap, addr, val, len);
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+static inline int
+st_lsm6dsx_write_locked(struct st_lsm6dsx_hw *hw, unsigned int addr,
+			unsigned int val)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = regmap_write(hw->regmap, addr, val);
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}

 #endif /* ST_LSM6DSX_H */
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -68,6 +68,9 @@ enum st_lsm6dsx_fifo_tag {
 	ST_LSM6DSX_GYRO_TAG = 0x01,
 	ST_LSM6DSX_ACC_TAG = 0x02,
 	ST_LSM6DSX_TS_TAG = 0x04,
+	ST_LSM6DSX_EXT0_TAG = 0x0f,
+	ST_LSM6DSX_EXT1_TAG = 0x10,
+	ST_LSM6DSX_EXT2_TAG = 0x11,
 };

 static const
@@ -102,6 +105,9 @@ static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,

 	*max_odr = 0, *min_odr = ~0;
 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
 		sensor = iio_priv(hw->iio_devs[i]);

 		if (!(hw->enable_mask & BIT(sensor->id)))
@@ -125,6 +131,9 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
 		const struct st_lsm6dsx_reg *dec_reg;

+		if (!hw->iio_devs[i])
+			continue;
+
 		sensor = iio_priv(hw->iio_devs[i]);
 		/* update fifo decimators and sample in pattern */
 		if (hw->enable_mask & BIT(sensor->id)) {
@@ -142,8 +151,9 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
 		if (dec_reg->addr) {
 			int val = ST_LSM6DSX_SHIFT_VAL(data, dec_reg->mask);

-			err = regmap_update_bits(hw->regmap, dec_reg->addr,
-						 dec_reg->mask, val);
+			err = st_lsm6dsx_update_bits_locked(hw, dec_reg->addr,
+							    dec_reg->mask,
+							    val);
 			if (err < 0)
 				return err;
 		}
@@ -162,7 +172,7 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
 		int val, ts_dec = !!hw->ts_sip;

 		val = ST_LSM6DSX_SHIFT_VAL(ts_dec, ts_dec_reg->mask);
-		err = regmap_update_bits(hw->regmap, ts_dec_reg->addr,
+		err = st_lsm6dsx_update_bits_locked(hw, ts_dec_reg->addr,
 						    ts_dec_reg->mask, val);
 	}
 	return err;
@@ -171,12 +181,12 @@ static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
 int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
 			     enum st_lsm6dsx_fifo_mode fifo_mode)
 {
+	unsigned int data;
 	int err;

-	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
-				 ST_LSM6DSX_FIFO_MODE_MASK,
-				 FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK,
-					    fifo_mode));
+	data = FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode);
+	err = st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
+					    ST_LSM6DSX_FIFO_MODE_MASK, data);
 	if (err < 0)
 		return err;

@@ -207,11 +217,11 @@ static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
 			data = 0;
 		}
 		val = ST_LSM6DSX_SHIFT_VAL(data, batch_reg->mask);
-		return regmap_update_bits(hw->regmap, batch_reg->addr,
+		return st_lsm6dsx_update_bits_locked(hw, batch_reg->addr,
 						     batch_reg->mask, val);
 	} else {
 		data = hw->enable_mask ? ST_LSM6DSX_MAX_FIFO_ODR_VAL : 0;
-		return regmap_update_bits(hw->regmap,
+		return st_lsm6dsx_update_bits_locked(hw,
 					ST_LSM6DSX_REG_FIFO_MODE_ADDR,
 					ST_LSM6DSX_FIFO_ODR_MASK,
 					FIELD_PREP(ST_LSM6DSX_FIFO_ODR_MASK,
@@ -231,6 +241,9 @@ int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark)
 		return 0;

 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
 		cur_sensor = iio_priv(hw->iio_devs[i]);

 		if (!(hw->enable_mask & BIT(cur_sensor->id)))
@@ -246,19 +259,23 @@ int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark)
 	fifo_watermark = (fifo_watermark / hw->sip) * hw->sip;
 	fifo_watermark = fifo_watermark * hw->settings->fifo_ops.th_wl;

+	mutex_lock(&hw->page_lock);
 	err = regmap_read(hw->regmap, hw->settings->fifo_ops.fifo_th.addr + 1,
 			  &data);
 	if (err < 0)
-		return err;
+		goto out;

 	fifo_th_mask = hw->settings->fifo_ops.fifo_th.mask;
 	fifo_watermark = ((data << 8) & ~fifo_th_mask) |
 			 (fifo_watermark & fifo_th_mask);

 	wdata = cpu_to_le16(fifo_watermark);
-	return regmap_bulk_write(hw->regmap,
+	err = regmap_bulk_write(hw->regmap,
 				hw->settings->fifo_ops.fifo_th.addr,
 				&wdata, sizeof(wdata));
+out:
+	mutex_unlock(&hw->page_lock);
+	return err;
 }

 static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw)
@@ -267,12 +284,15 @@ static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw)
 	int i, err;

 	/* reset hw ts counter */
-	err = regmap_write(hw->regmap, ST_LSM6DSX_REG_TS_RESET_ADDR,
+	err = st_lsm6dsx_write_locked(hw, ST_LSM6DSX_REG_TS_RESET_ADDR,
 				      ST_LSM6DSX_TS_RESET_VAL);
 	if (err < 0)
 		return err;

 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
 		sensor = iio_priv(hw->iio_devs[i]);
 		/*
 		 * store enable buffer timestamp as reference for
@@ -297,7 +317,7 @@ static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr,
 	while (read_len < data_len) {
 		word_len = min_t(unsigned int, data_len - read_len,
 				 max_word_len);
-		err = regmap_bulk_read(hw->regmap, addr, data + read_len,
+		err = st_lsm6dsx_read_locked(hw, addr, data + read_len,
 					     word_len);
 		if (err < 0)
 			return err;
@@ -328,7 +348,7 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
 	__le16 fifo_status;
 	s64 ts = 0;

-	err = regmap_bulk_read(hw->regmap,
+	err = st_lsm6dsx_read_locked(hw,
 				     hw->settings->fifo_ops.fifo_diff.addr,
 				     &fifo_status, sizeof(fifo_status));
 	if (err < 0) {
@@ -436,6 +456,55 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
 	return read_len;
 }

+static int
+st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
+			    u8 *data, s64 ts)
+{
+	struct st_lsm6dsx_sensor *sensor;
+	struct iio_dev *iio_dev;
+
+	/*
+	 * EXT_TAG are managed in FIFO fashion so ST_LSM6DSX_EXT0_TAG
+	 * corresponds to the first enabled channel, ST_LSM6DSX_EXT1_TAG
+	 * to the second one and ST_LSM6DSX_EXT2_TAG to the last enabled
+	 * channel
+	 */
+	switch (tag) {
+	case ST_LSM6DSX_GYRO_TAG:
+		iio_dev = hw->iio_devs[ST_LSM6DSX_ID_GYRO];
+		break;
+	case ST_LSM6DSX_ACC_TAG:
+		iio_dev = hw->iio_devs[ST_LSM6DSX_ID_ACC];
+		break;
+	case ST_LSM6DSX_EXT0_TAG:
+		if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0))
+			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT0];
+		else if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1))
+			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1];
+		else
+			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
+		break;
+	case ST_LSM6DSX_EXT1_TAG:
+		if ((hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0)) &&
+		    (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1)))
+			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1];
+		else
+			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
+		break;
+	case ST_LSM6DSX_EXT2_TAG:
+		iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sensor = iio_priv(iio_dev);
+	iio_push_to_buffers_with_timestamp(iio_dev, data,
+					   ts + sensor->ts_ref);
+
+	return 0;
+}
+
 /**
 * st_lsm6dsx_read_tagged_fifo() - LSM6DSO read FIFO routine
 * @hw: Pointer to instance of struct st_lsm6dsx_hw.
@@ -455,7 +524,7 @@ int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw)
 	__le16 fifo_status;
 	s64 ts = 0;

-	err = regmap_bulk_read(hw->regmap,
+	err = st_lsm6dsx_read_locked(hw,
 				     hw->settings->fifo_ops.fifo_diff.addr,
 				     &fifo_status, sizeof(fifo_status));
 	if (err < 0) {
@@ -491,8 +560,7 @@ int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw)
 			       ST_LSM6DSX_SAMPLE_SIZE);

 			tag = hw->buff[i] >> 3;
-			switch (tag) {
-			case ST_LSM6DSX_TS_TAG:
+			if (tag == ST_LSM6DSX_TS_TAG) {
 				/*
 				 * hw timestamp is 4B long and it is stored
 				 * in FIFO according to this schema:
@@ -509,19 +577,9 @@ int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw)
 				if (!reset_ts && ts >= 0xffff0000)
 					reset_ts = true;
 				ts *= ST_LSM6DSX_TS_SENSITIVITY;
-				break;
-			case ST_LSM6DSX_GYRO_TAG:
-				iio_push_to_buffers_with_timestamp(
-					hw->iio_devs[ST_LSM6DSX_ID_GYRO],
-					iio_buff, gyro_sensor->ts_ref + ts);
-				break;
-			case ST_LSM6DSX_ACC_TAG:
-				iio_push_to_buffers_with_timestamp(
-					hw->iio_devs[ST_LSM6DSX_ID_ACC],
-					iio_buff, acc_sensor->ts_ref + ts);
-				break;
-			default:
-				break;
+			} else {
+				st_lsm6dsx_push_tagged_data(hw, tag, iio_buff,
+							    ts);
 			}
 		}
 	}
@@ -562,19 +620,21 @@ static int st_lsm6dsx_update_fifo(struct iio_dev *iio_dev, bool enable)
 			goto out;
 	}

-	if (enable) {
-		err = st_lsm6dsx_sensor_enable(sensor);
+	if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
+	    sensor->id == ST_LSM6DSX_ID_EXT1 ||
+	    sensor->id == ST_LSM6DSX_ID_EXT2) {
+		err = st_lsm6dsx_shub_set_enable(sensor, enable);
 		if (err < 0)
 			goto out;
 	} else {
-		err = st_lsm6dsx_sensor_disable(sensor);
+		err = st_lsm6dsx_sensor_set_enable(sensor, enable);
 		if (err < 0)
 			goto out;
-	}

 		err = st_lsm6dsx_set_fifo_odr(sensor, enable);
 		if (err < 0)
 			goto out;
+	}

 	err = st_lsm6dsx_update_decimators(hw);
 	if (err < 0)
@@ -690,6 +750,9 @@ int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
 	}

 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
 		buffer = devm_iio_kfifo_allocate(hw->dev);
 		if (!buffer)
 			return -ENOMEM;

--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -56,6 +56,7 @@
 #define ST_LSM6DSX_REG_WHOAMI_ADDR		0x0f
 #define ST_LSM6DSX_REG_RESET_ADDR		0x12
 #define ST_LSM6DSX_REG_RESET_MASK		BIT(0)
+#define ST_LSM6DSX_REG_BOOT_MASK		BIT(7)
 #define ST_LSM6DSX_REG_BDU_ADDR			0x12
 #define ST_LSM6DSX_REG_BDU_MASK			BIT(6)
 #define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR	0x13
@@ -87,17 +88,6 @@
 #define ST_LSM6DSX_GYRO_FS_1000_GAIN		IIO_DEGREE_TO_RAD(35000)
 #define ST_LSM6DSX_GYRO_FS_2000_GAIN		IIO_DEGREE_TO_RAD(70000)

-struct st_lsm6dsx_odr {
-	u16 hz;
-	u8 val;
-};
-
-#define ST_LSM6DSX_ODR_LIST_SIZE	6
-struct st_lsm6dsx_odr_table_entry {
-	struct st_lsm6dsx_reg reg;
-	struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE];
-};
-
 static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = {
 	[ST_LSM6DSX_ID_ACC] = {
 		.reg = {
@@ -125,17 +115,6 @@ static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = {
 	}
 };

-struct st_lsm6dsx_fs {
-	u32 gain;
-	u8 val;
-};
-
-#define ST_LSM6DSX_FS_LIST_SIZE		4
-struct st_lsm6dsx_fs_table_entry {
-	struct st_lsm6dsx_reg reg;
-	struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE];
-};
-
 static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = {
 	[ST_LSM6DSX_ID_ACC] = {
 		.reg = {
@@ -341,27 +320,35 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = GENMASK(7, 6),
 			},
 		},
+		.shub_settings = {
+			.page_mux = {
+				.addr = 0x01,
+				.mask = BIT(6),
+			},
+			.master_en = {
+				.addr = 0x14,
+				.mask = BIT(2),
+			},
+			.pullup_en = {
+				.addr = 0x14,
+				.mask = BIT(3),
+			},
+			.aux_sens = {
+				.addr = 0x14,
+				.mask = GENMASK(1, 0),
+			},
+			.wr_once = {
+				.addr = 0x14,
+				.mask = BIT(6),
+			},
+			.shub_out = 0x02,
+			.slv0_addr = 0x15,
+			.dw_slv0_addr = 0x21,
+			.batch_en = BIT(3),
+		}
 	},
 };

-#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx)		\
-{									\
-	.type = chan_type,						\
-	.address = addr,						\
-	.modified = 1,							\
-	.channel2 = mod,						\
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
-			      BIT(IIO_CHAN_INFO_SCALE),			\
-	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
-	.scan_index = scan_idx,						\
-	.scan_type = {							\
-		.sign = 's',						\
-		.realbits = 16,						\
-		.storagebits = 16,					\
-		.endianness = IIO_LE,					\
-	},								\
-}
-
 static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
 	ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR,
 			   IIO_MOD_X, 0),
@@ -382,6 +369,21 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };

+int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	unsigned int data;
+	int err;
+
+	hub_settings = &hw->settings->shub_settings;
+	data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->page_mux.mask);
+	err = regmap_update_bits(hw->regmap, hub_settings->page_mux.addr,
+				 hub_settings->page_mux.mask, data);
+	usleep_range(100, 150);
+
+	return err;
+}
+
 static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id)
 {
 	int err, i, j, data;
@@ -421,6 +423,7 @@ static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,
 {
 	struct st_lsm6dsx_hw *hw = sensor->hw;
 	const struct st_lsm6dsx_reg *reg;
+	unsigned int data;
 	int i, err;
 	u8 val;

@@ -433,8 +436,8 @@ static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,

 	val = st_lsm6dsx_fs_table[sensor->id].fs_avl[i].val;
 	reg = &st_lsm6dsx_fs_table[sensor->id].reg;
-	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
-				 ST_LSM6DSX_SHIFT_VAL(val, reg->mask));
+	data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
+	err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
 	if (err < 0)
 		return err;

@@ -448,7 +451,11 @@ int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val)
 	int i;

 	for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
-		if (st_lsm6dsx_odr_table[sensor->id].odr_avl[i].hz == odr)
+		/*
+		 * ext devices can run at different odr respect to
+		 * accel sensor
+		 */
+		if (st_lsm6dsx_odr_table[sensor->id].odr_avl[i].hz >= odr)
 			break;

 	if (i == ST_LSM6DSX_ODR_LIST_SIZE)
@@ -459,48 +466,86 @@ int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val)
 	return 0;
 }

-static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr)
+static u16 st_lsm6dsx_check_odr_dependency(struct st_lsm6dsx_hw *hw, u16 odr,
+					   enum st_lsm6dsx_sensor_id id)
 {
+	struct st_lsm6dsx_sensor *ref = iio_priv(hw->iio_devs[id]);
+
+	if (odr > 0) {
+		if (hw->enable_mask & BIT(id))
+			return max_t(u16, ref->odr, odr);
+		else
+			return odr;
+	} else {
+		return (hw->enable_mask & BIT(id)) ? ref->odr : 0;
+	}
+}
+
+static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 req_odr)
+{
+	struct st_lsm6dsx_sensor *ref_sensor = sensor;
 	struct st_lsm6dsx_hw *hw = sensor->hw;
 	const struct st_lsm6dsx_reg *reg;
+	unsigned int data;
+	u8 val = 0;
 	int err;
-	u8 val;

-	err = st_lsm6dsx_check_odr(sensor, odr, &val);
-	if (err < 0)
-		return err;
+	switch (sensor->id) {
+	case ST_LSM6DSX_ID_EXT0:
+	case ST_LSM6DSX_ID_EXT1:
+	case ST_LSM6DSX_ID_EXT2:
+	case ST_LSM6DSX_ID_ACC: {
+		u16 odr;
+		int i;

-	reg = &st_lsm6dsx_odr_table[sensor->id].reg;
-	return regmap_update_bits(hw->regmap, reg->addr, reg->mask,
-				  ST_LSM6DSX_SHIFT_VAL(val, reg->mask));
-}
+		/*
+		 * i2c embedded controller relies on the accelerometer sensor as
+		 * bus read/write trigger so we need to enable accel device
+		 * at odr = max(accel_odr, ext_odr) in order to properly
+		 * communicate with i2c slave devices
+		 */
+		ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+		for (i = ST_LSM6DSX_ID_ACC; i < ST_LSM6DSX_ID_MAX; i++) {
+			if (!hw->iio_devs[i] || i == sensor->id)
+				continue;

-int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor)
-{
-	int err;
+			odr = st_lsm6dsx_check_odr_dependency(hw, req_odr, i);
+			if (odr != req_odr)
+				/* device already configured */
+				return 0;
+		}
+		break;
+	}
+	default:
+		break;
+	}

-	err = st_lsm6dsx_set_odr(sensor, sensor->odr);
+	if (req_odr > 0) {
+		err = st_lsm6dsx_check_odr(ref_sensor, req_odr, &val);
 		if (err < 0)
 			return err;
+	}

-	sensor->hw->enable_mask |= BIT(sensor->id);
-
-	return 0;
+	reg = &st_lsm6dsx_odr_table[ref_sensor->id].reg;
+	data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
+	return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
 }

-int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor)
+int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
+				 bool enable)
 {
 	struct st_lsm6dsx_hw *hw = sensor->hw;
-	const struct st_lsm6dsx_reg *reg;
+	u16 odr = enable ? sensor->odr : 0;
 	int err;

-	reg = &st_lsm6dsx_odr_table[sensor->id].reg;
-	err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
-				 ST_LSM6DSX_SHIFT_VAL(0, reg->mask));
+	err = st_lsm6dsx_set_odr(sensor, odr);
 	if (err < 0)
 		return err;

-	sensor->hw->enable_mask &= ~BIT(sensor->id);
+	if (enable)
+		hw->enable_mask |= BIT(sensor->id);
+	else
+		hw->enable_mask &= ~BIT(sensor->id);

 	return 0;
 }
@@ -512,18 +557,18 @@ static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor,
 	int err, delay;
 	__le16 data;

-	err = st_lsm6dsx_sensor_enable(sensor);
+	err = st_lsm6dsx_sensor_set_enable(sensor, true);
 	if (err < 0)
 		return err;

 	delay = 1000000 / sensor->odr;
 	usleep_range(delay, 2 * delay);

-	err = regmap_bulk_read(hw->regmap, addr, &data, sizeof(data));
+	err = st_lsm6dsx_read_locked(hw, addr, &data, sizeof(data));
 	if (err < 0)
 		return err;

-	st_lsm6dsx_sensor_disable(sensor);
+	st_lsm6dsx_sensor_set_enable(sensor, false);

 	*val = (s16)le16_to_cpu(data);

@@ -596,7 +641,7 @@ static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev,
 	return err;
 }

-static int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val)
+int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val)
 {
 	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
 	struct st_lsm6dsx_hw *hw = sensor->hw;
@@ -692,8 +737,6 @@ static const struct iio_info st_lsm6dsx_gyro_info = {
 	.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
 };

-static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
-
 static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
 {
 	struct device_node *np = hw->dev->of_node;
@@ -732,6 +775,51 @@ static int st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw, u8 *drdy_reg)
 	return err;
 }

+static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct device_node *np = hw->dev->of_node;
+	struct st_sensors_platform_data *pdata;
+	unsigned int data;
+	int err = 0;
+
+	hub_settings = &hw->settings->shub_settings;
+
+	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
+	if ((np && of_property_read_bool(np, "st,pullups")) ||
+	    (pdata && pdata->pullups)) {
+		err = st_lsm6dsx_set_page(hw, true);
+		if (err < 0)
+			return err;
+
+		data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->pullup_en.mask);
+		err = regmap_update_bits(hw->regmap,
+					 hub_settings->pullup_en.addr,
+					 hub_settings->pullup_en.mask, data);
+
+		st_lsm6dsx_set_page(hw, false);
+
+		if (err < 0)
+			return err;
+	}
+
+	if (hub_settings->aux_sens.addr) {
+		/* configure aux sensors */
+		err = st_lsm6dsx_set_page(hw, true);
+		if (err < 0)
+			return err;
+
+		data = ST_LSM6DSX_SHIFT_VAL(3, hub_settings->aux_sens.mask);
+		err = regmap_update_bits(hw->regmap,
+					 hub_settings->aux_sens.addr,
+					 hub_settings->aux_sens.mask, data);
+
+		st_lsm6dsx_set_page(hw, false);
+	}
+
+	return err;
+}
+
 static int st_lsm6dsx_init_hw_timer(struct st_lsm6dsx_hw *hw)
 {
 	const struct st_lsm6dsx_hw_ts_settings *ts_settings;
@@ -775,12 +863,23 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
 	u8 drdy_int_reg;
 	int err;

-	err = regmap_write(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR,
-			   ST_LSM6DSX_REG_RESET_MASK);
+	/* device sw reset */
+	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR,
+				 ST_LSM6DSX_REG_RESET_MASK,
+				 FIELD_PREP(ST_LSM6DSX_REG_RESET_MASK, 1));
 	if (err < 0)
 		return err;

-	msleep(200);
+	msleep(50);
+
+	/* reload trimming parameter */
+	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_RESET_ADDR,
+				 ST_LSM6DSX_REG_BOOT_MASK,
+				 FIELD_PREP(ST_LSM6DSX_REG_BOOT_MASK, 1));
+	if (err < 0)
+		return err;
+
+	msleep(50);

 	/* enable Block Data Update */
 	err = regmap_update_bits(hw->regmap, ST_LSM6DSX_REG_BDU_ADDR,
@@ -801,6 +900,10 @@ static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw)
 	if (err < 0)
 		return err;

+	err = st_lsm6dsx_init_shub(hw);
+	if (err < 0)
+		return err;
+
 	return st_lsm6dsx_init_hw_timer(hw);
 }

@@ -854,6 +957,7 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
 		     struct regmap *regmap)
 {
+	const struct st_lsm6dsx_shub_settings *hub_settings;
 	struct st_lsm6dsx_hw *hw;
 	int i, err;

@@ -865,6 +969,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,

 	mutex_init(&hw->fifo_lock);
 	mutex_init(&hw->conf_lock);
+	mutex_init(&hw->page_lock);

 	hw->buff = devm_kzalloc(dev, ST_LSM6DSX_BUFF_SIZE, GFP_KERNEL);
 	if (!hw->buff)
@@ -878,7 +983,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
 	if (err < 0)
 		return err;

-	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+	for (i = 0; i < ST_LSM6DSX_ID_EXT0; i++) {
 		hw->iio_devs[i] = st_lsm6dsx_alloc_iiodev(hw, i, name);
 		if (!hw->iio_devs[i])
 			return -ENOMEM;
@@ -888,6 +993,13 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
 	if (err < 0)
 		return err;

+	hub_settings = &hw->settings->shub_settings;
+	if (hub_settings->master_en.addr) {
+		err = st_lsm6dsx_shub_probe(hw, name);
+		if (err < 0)
+			return err;
+	}
+
 	if (hw->irq > 0) {
 		err = st_lsm6dsx_fifo_setup(hw);
 		if (err < 0)
@@ -895,6 +1007,9 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
 	}

 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
 		err = devm_iio_device_register(hw->dev, hw->iio_devs[i]);
 		if (err)
 			return err;
@@ -909,16 +1024,21 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev)
 	struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev);
 	struct st_lsm6dsx_sensor *sensor;
 	const struct st_lsm6dsx_reg *reg;
+	unsigned int data;
 	int i, err = 0;

 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
 		sensor = iio_priv(hw->iio_devs[i]);
 		if (!(hw->enable_mask & BIT(sensor->id)))
 			continue;

 		reg = &st_lsm6dsx_odr_table[sensor->id].reg;
-		err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
-					 ST_LSM6DSX_SHIFT_VAL(0, reg->mask));
+		data = ST_LSM6DSX_SHIFT_VAL(0, reg->mask);
+		err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask,
+						    data);
 		if (err < 0)
 			return err;
 	}
@@ -936,6 +1056,9 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev)
 	int i, err = 0;

 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
 		sensor = iio_priv(hw->iio_devs[i]);
 		if (!(hw->enable_mask & BIT(sensor->id)))
 			continue;

--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+/*
+ * STMicroelectronics st_lsm6dsx i2c controller driver
+ *
+ * i2c controller embedded in lsm6dx series can connect up to four
+ * slave devices using accelerometer sensor as trigger for i2c
+ * read/write operations. Current implementation relies on SLV0 channel
+ * for slave configuration and SLV{1,2,3} to read data and push them into
+ * the hw FIFO
+ *
+ * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/bitfield.h>
+
+#include "st_lsm6dsx.h"
+
+#define ST_LSM6DSX_MAX_SLV_NUM			3
+#define ST_LSM6DSX_SLV_ADDR(n, base)		((base) + (n) * 3)
+#define ST_LSM6DSX_SLV_SUB_ADDR(n, base)	((base) + 1 + (n) * 3)
+#define ST_LSM6DSX_SLV_CONFIG(n, base)		((base) + 2 + (n) * 3)
+
+#define ST_LS6DSX_READ_OP_MASK			GENMASK(2, 0)
+
+static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = {
+	/* LIS2MDL */
+	{
+		.i2c_addr = { 0x1e },
+		.wai = {
+			.addr = 0x4f,
+			.val = 0x40,
+		},
+		.id = ST_LSM6DSX_ID_MAGN,
+		.odr_table = {
+			.reg = {
+				.addr = 0x60,
+				.mask = GENMASK(3, 2),
+			},
+			.odr_avl[0] = {  10, 0x0 },
+			.odr_avl[1] = {  20, 0x1 },
+			.odr_avl[2] = {  50, 0x2 },
+			.odr_avl[3] = { 100, 0x3 },
+		},
+		.fs_table = {
+			.fs_avl[0] = {
+				.gain = 1500,
+				.val = 0x0,
+			}, /* 1500 uG/LSB */
+		},
+		.temp_comp = {
+			.addr = 0x60,
+			.mask = BIT(7),
+		},
+		.pwr_table = {
+			.reg = {
+				.addr = 0x60,
+				.mask = GENMASK(1, 0),
+			},
+			.off_val = 0x2,
+			.on_val = 0x0,
+		},
+		.off_canc = {
+			.addr = 0x61,
+			.mask = BIT(1),
+		},
+		.bdu = {
+			.addr = 0x62,
+			.mask = BIT(4),
+		},
+		.out = {
+			.addr = 0x68,
+			.len = 6,
+		},
+	},
+};
+
+static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
+{
+	struct st_lsm6dsx_sensor *sensor;
+
+	sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+	msleep((2000U / sensor->odr) + 1);
+}
+
+/**
+ * st_lsm6dsx_shub_read_reg - read i2c controller register
+ *
+ * Read st_lsm6dsx i2c controller register
+ */
+static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr,
+				    u8 *data, int len)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	int err;
+
+	mutex_lock(&hw->page_lock);
+
+	hub_settings = &hw->settings->shub_settings;
+	err = st_lsm6dsx_set_page(hw, true);
+	if (err < 0)
+		goto out;
+
+	err = regmap_bulk_read(hw->regmap, addr, data, len);
+
+	st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+/**
+ * st_lsm6dsx_shub_write_reg - write i2c controller register
+ *
+ * Write st_lsm6dsx i2c controller register
+ */
+static int st_lsm6dsx_shub_write_reg(struct st_lsm6dsx_hw *hw, u8 addr,
+				     u8 *data, int len)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = st_lsm6dsx_set_page(hw, true);
+	if (err < 0)
+		goto out;
+
+	err = regmap_bulk_write(hw->regmap, addr, data, len);
+
+	st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+static int
+st_lsm6dsx_shub_write_reg_with_mask(struct st_lsm6dsx_hw *hw, u8 addr,
+				    u8 mask, u8 val)
+{
+	int err;
+
+	mutex_lock(&hw->page_lock);
+	err = st_lsm6dsx_set_page(hw, true);
+	if (err < 0)
+		goto out;
+
+	err = regmap_update_bits(hw->regmap, addr, mask, val);
+
+	st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor,
+					 bool enable)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	unsigned int data;
+	int err;
+
+	/* enable acc sensor as trigger */
+	err = st_lsm6dsx_sensor_set_enable(sensor, enable);
+	if (err < 0)
+		return err;
+
+	mutex_lock(&hw->page_lock);
+
+	hub_settings = &hw->settings->shub_settings;
+	err = st_lsm6dsx_set_page(hw, true);
+	if (err < 0)
+		goto out;
+
+	data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask);
+	err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr,
+				 hub_settings->master_en.mask, data);
+
+	st_lsm6dsx_set_page(hw, false);
+out:
+	mutex_unlock(&hw->page_lock);
+
+	return err;
+}
+
+/**
+ * st_lsm6dsx_shub_read - read data from slave device register
+ *
+ * Read data from slave device register. SLV0 is used for
+ * one-shot read operation
+ */
+static int
+st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
+		     u8 *data, int len)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	u8 config[3], slv_addr;
+	int err;
+
+	hub_settings = &hw->settings->shub_settings;
+	slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
+
+	config[0] = (sensor->ext_info.addr << 1) | 1;
+	config[1] = addr;
+	config[2] = len & ST_LS6DSX_READ_OP_MASK;
+
+	err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					sizeof(config));
+	if (err < 0)
+		return err;
+
+	err = st_lsm6dsx_shub_master_enable(sensor, true);
+	if (err < 0)
+		return err;
+
+	st_lsm6dsx_shub_wait_complete(hw);
+
+	err = st_lsm6dsx_shub_read_reg(hw, hub_settings->shub_out, data,
+				       len & ST_LS6DSX_READ_OP_MASK);
+
+	st_lsm6dsx_shub_master_enable(sensor, false);
+
+	memset(config, 0, sizeof(config));
+	return st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					 sizeof(config));
+}
+
+/**
+ * st_lsm6dsx_shub_write - write data to slave device register
+ *
+ * Write data from slave device register. SLV0 is used for
+ * one-shot write operation
+ */
+static int
+st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr,
+		      u8 *data, int len)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	u8 config[2], slv_addr;
+	int err, i;
+
+	hub_settings = &hw->settings->shub_settings;
+	if (hub_settings->wr_once.addr) {
+		unsigned int data;
+
+		data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->wr_once.mask);
+		err = st_lsm6dsx_shub_write_reg_with_mask(hw,
+			hub_settings->wr_once.addr,
+			hub_settings->wr_once.mask,
+			data);
+		if (err < 0)
+			return err;
+	}
+
+	slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
+	config[0] = sensor->ext_info.addr << 1;
+	for (i = 0 ; i < len; i++) {
+		config[1] = addr + i;
+
+		err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+						sizeof(config));
+		if (err < 0)
+			return err;
+
+		err = st_lsm6dsx_shub_write_reg(hw, hub_settings->dw_slv0_addr,
+						&data[i], 1);
+		if (err < 0)
+			return err;
+
+		err = st_lsm6dsx_shub_master_enable(sensor, true);
+		if (err < 0)
+			return err;
+
+		st_lsm6dsx_shub_wait_complete(hw);
+
+		st_lsm6dsx_shub_master_enable(sensor, false);
+	}
+
+	memset(config, 0, sizeof(config));
+	return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, sizeof(config));
+}
+
+static int
+st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor,
+				u8 addr, u8 mask, u8 val)
+{
+	int err;
+	u8 data;
+
+	err = st_lsm6dsx_shub_read(sensor, addr, &data, sizeof(data));
+	if (err < 0)
+		return err;
+
+	data = ((data & ~mask) | (val << __ffs(mask) & mask));
+
+	return st_lsm6dsx_shub_write(sensor, addr, &data, sizeof(data));
+}
+
+static int
+st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor,
+			    u16 odr, u16 *val)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int i;
+
+	settings = sensor->ext_info.settings;
+	for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
+		if (settings->odr_table.odr_avl[i].hz == odr)
+			break;
+
+	if (i == ST_LSM6DSX_ODR_LIST_SIZE)
+		return -EINVAL;
+
+	*val = settings->odr_table.odr_avl[i].val;
+	return 0;
+}
+
+static int
+st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	u16 val;
+	int err;
+
+	err = st_lsm6dsx_shub_get_odr_val(sensor, odr, &val);
+	if (err < 0)
+		return err;
+
+	settings = sensor->ext_info.settings;
+	return st_lsm6dsx_shub_write_with_mask(sensor,
+					       settings->odr_table.reg.addr,
+					       settings->odr_table.reg.mask,
+					       val);
+}
+
+/* use SLV{1,2,3} for FIFO read operations */
+static int
+st_lsm6dsx_shub_config_channels(struct st_lsm6dsx_sensor *sensor,
+				bool enable)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	u8 config[9] = {}, enable_mask, slv_addr;
+	struct st_lsm6dsx_hw *hw = sensor->hw;
+	struct st_lsm6dsx_sensor *cur_sensor;
+	int i, j = 0;
+
+	hub_settings = &hw->settings->shub_settings;
+	if (enable)
+		enable_mask = hw->enable_mask | BIT(sensor->id);
+	else
+		enable_mask = hw->enable_mask & ~BIT(sensor->id);
+
+	for (i = ST_LSM6DSX_ID_EXT0; i <= ST_LSM6DSX_ID_EXT2; i++) {
+		if (!hw->iio_devs[i])
+			continue;
+
+		cur_sensor = iio_priv(hw->iio_devs[i]);
+		if (!(enable_mask & BIT(cur_sensor->id)))
+			continue;
+
+		settings = cur_sensor->ext_info.settings;
+		config[j] = (sensor->ext_info.addr << 1) | 1;
+		config[j + 1] = settings->out.addr;
+		config[j + 2] = (settings->out.len & ST_LS6DSX_READ_OP_MASK) |
+				hub_settings->batch_en;
+		j += 3;
+	}
+
+	slv_addr = ST_LSM6DSX_SLV_ADDR(1, hub_settings->slv0_addr);
+	return st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					 sizeof(config));
+}
+
+int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int err;
+
+	err = st_lsm6dsx_shub_config_channels(sensor, enable);
+	if (err < 0)
+		return err;
+
+	settings = sensor->ext_info.settings;
+	if (enable) {
+		err = st_lsm6dsx_shub_set_odr(sensor, sensor->odr);
+		if (err < 0)
+			return err;
+	} else {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->odr_table.reg.addr,
+					settings->odr_table.reg.mask, 0);
+		if (err < 0)
+			return err;
+	}
+
+	if (settings->pwr_table.reg.addr) {
+		u8 val;
+
+		val = enable ? settings->pwr_table.on_val
+			     : settings->pwr_table.off_val;
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->pwr_table.reg.addr,
+					settings->pwr_table.reg.mask, val);
+		if (err < 0)
+			return err;
+	}
+
+	return st_lsm6dsx_shub_master_enable(sensor, enable);
+}
+
+static int
+st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor,
+			     struct iio_chan_spec const *ch,
+			     int *val)
+{
+	int err, delay, len = ch->scan_type.realbits >> 3;
+	__le16 data;
+
+	err = st_lsm6dsx_shub_set_enable(sensor, true);
+	if (err < 0)
+		return err;
+
+	delay = 1000000 / sensor->odr;
+	usleep_range(delay, 2 * delay);
+
+	err = st_lsm6dsx_shub_read(sensor, ch->address, (u8 *)&data, len);
+	if (err < 0)
+		return err;
+
+	st_lsm6dsx_shub_set_enable(sensor, false);
+
+	switch (len) {
+	case 2:
+		*val = (s16)le16_to_cpu(data);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return IIO_VAL_INT;
+}
+
+static int
+st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
+			 struct iio_chan_spec const *ch,
+			 int *val, int *val2, long mask)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(iio_dev);
+		if (ret)
+			break;
+
+		ret = st_lsm6dsx_shub_read_oneshot(sensor, ch, val);
+		iio_device_release_direct_mode(iio_dev);
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = sensor->odr;
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = sensor->gain;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int
+st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
+			  struct iio_chan_spec const *chan,
+			  int val, int val2, long mask)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	int err;
+
+	err = iio_device_claim_direct_mode(iio_dev);
+	if (err)
+		return err;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ: {
+		u16 data;
+
+		err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data);
+		if (!err)
+			sensor->odr = val;
+		break;
+	}
+	default:
+		err = -EINVAL;
+		break;
+	}
+
+	iio_device_release_direct_mode(iio_dev);
+
+	return err;
+}
+
+static ssize_t
+st_lsm6dsx_shub_sampling_freq_avail(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int i, len = 0;
+
+	settings = sensor->ext_info.settings;
+	for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) {
+		u16 val = settings->odr_table.odr_avl[i].hz;
+
+		if (val > 0)
+			len += scnprintf(buf + len, PAGE_SIZE - len, "%d ",
+					 val);
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int i, len = 0;
+
+	settings = sensor->ext_info.settings;
+	for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) {
+		u16 val = settings->fs_table.fs_avl[i].gain;
+
+		if (val > 0)
+			len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
+					 val);
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_shub_sampling_freq_avail);
+static IIO_DEVICE_ATTR(in_scale_available, 0444,
+		       st_lsm6dsx_shub_scale_avail, NULL, 0);
+static struct attribute *st_lsm6dsx_ext_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_in_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group st_lsm6dsx_ext_attribute_group = {
+	.attrs = st_lsm6dsx_ext_attributes,
+};
+
+static const struct iio_info st_lsm6dsx_ext_info = {
+	.attrs = &st_lsm6dsx_ext_attribute_group,
+	.read_raw = st_lsm6dsx_shub_read_raw,
+	.write_raw = st_lsm6dsx_shub_write_raw,
+	.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
+};
+
+static struct iio_dev *
+st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
+			     enum st_lsm6dsx_sensor_id id,
+			     const struct st_lsm6dsx_ext_dev_settings *info,
+			     u8 i2c_addr, const char *name)
+{
+	struct iio_chan_spec *ext_channels;
+	struct st_lsm6dsx_sensor *sensor;
+	struct iio_dev *iio_dev;
+
+	iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor));
+	if (!iio_dev)
+		return NULL;
+
+	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->dev.parent = hw->dev;
+	iio_dev->info = &st_lsm6dsx_ext_info;
+
+	sensor = iio_priv(iio_dev);
+	sensor->id = id;
+	sensor->hw = hw;
+	sensor->odr = info->odr_table.odr_avl[0].hz;
+	sensor->gain = info->fs_table.fs_avl[0].gain;
+	sensor->ext_info.settings = info;
+	sensor->ext_info.addr = i2c_addr;
+	sensor->watermark = 1;
+
+	switch (info->id) {
+	case ST_LSM6DSX_ID_MAGN: {
+		const struct iio_chan_spec magn_channels[] = {
+			ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr,
+					   IIO_MOD_X, 0),
+			ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 2,
+					   IIO_MOD_Y, 1),
+			ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 4,
+					   IIO_MOD_Z, 2),
+			IIO_CHAN_SOFT_TIMESTAMP(3),
+		};
+
+		ext_channels = devm_kzalloc(hw->dev, sizeof(magn_channels),
+					    GFP_KERNEL);
+		if (!ext_channels)
+			return NULL;
+
+		memcpy(ext_channels, magn_channels, sizeof(magn_channels));
+		iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks;
+		iio_dev->channels = ext_channels;
+		iio_dev->num_channels = ARRAY_SIZE(magn_channels);
+
+		scnprintf(sensor->name, sizeof(sensor->name), "%s_magn",
+			  name);
+		break;
+	}
+	default:
+		return NULL;
+	}
+	iio_dev->name = sensor->name;
+
+	return iio_dev;
+}
+
+static int st_lsm6dsx_shub_init_device(struct st_lsm6dsx_sensor *sensor)
+{
+	const struct st_lsm6dsx_ext_dev_settings *settings;
+	int err;
+
+	settings = sensor->ext_info.settings;
+	if (settings->bdu.addr) {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+						      settings->bdu.addr,
+						      settings->bdu.mask, 1);
+		if (err < 0)
+			return err;
+	}
+
+	if (settings->temp_comp.addr) {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->temp_comp.addr,
+					settings->temp_comp.mask, 1);
+		if (err < 0)
+			return err;
+	}
+
+	if (settings->off_canc.addr) {
+		err = st_lsm6dsx_shub_write_with_mask(sensor,
+					settings->off_canc.addr,
+					settings->off_canc.mask, 1);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int
+st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
+			  const struct st_lsm6dsx_ext_dev_settings *settings)
+{
+	const struct st_lsm6dsx_shub_settings *hub_settings;
+	struct st_lsm6dsx_sensor *sensor;
+	u8 config[3], data, slv_addr;
+	bool found = false;
+	int i, err;
+
+	hub_settings = &hw->settings->shub_settings;
+	slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr);
+	sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+
+	for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) {
+		if (!settings->i2c_addr[i])
+			continue;
+
+		/* read wai slave register */
+		config[0] = (settings->i2c_addr[i] << 1) | 0x1;
+		config[1] = settings->wai.addr;
+		config[2] = 0x1;
+
+		err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+						sizeof(config));
+		if (err < 0)
+			return err;
+
+		err = st_lsm6dsx_shub_master_enable(sensor, true);
+		if (err < 0)
+			return err;
+
+		st_lsm6dsx_shub_wait_complete(hw);
+
+		err = st_lsm6dsx_shub_read_reg(hw,
+					       hub_settings->shub_out,
+					       &data, sizeof(data));
+
+		st_lsm6dsx_shub_master_enable(sensor, false);
+
+		if (err < 0)
+			return err;
+
+		if (data != settings->wai.val)
+			continue;
+
+		*i2c_addr = settings->i2c_addr[i];
+		found = true;
+		break;
+	}
+
+	/* reset SLV0 channel */
+	memset(config, 0, sizeof(config));
+	err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config,
+					sizeof(config));
+	if (err < 0)
+		return err;
+
+	return found ? 0 : -ENODEV;
+}
+
+int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name)
+{
+	enum st_lsm6dsx_sensor_id id = ST_LSM6DSX_ID_EXT0;
+	struct st_lsm6dsx_sensor *sensor;
+	int err, i, num_ext_dev = 0;
+	u8 i2c_addr = 0;
+
+	for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_ext_dev_table); i++) {
+		err = st_lsm6dsx_shub_check_wai(hw, &i2c_addr,
+					&st_lsm6dsx_ext_dev_table[i]);
+		if (err == -ENODEV)
+			continue;
+		else if (err < 0)
+			return err;
+
+		hw->iio_devs[id] = st_lsm6dsx_shub_alloc_iiodev(hw, id,
+						&st_lsm6dsx_ext_dev_table[i],
+						i2c_addr, name);
+		if (!hw->iio_devs[id])
+			return -ENOMEM;
+
+		sensor = iio_priv(hw->iio_devs[id]);
+		err = st_lsm6dsx_shub_init_device(sensor);
+		if (err < 0)
+			return err;
+
+		if (++num_ext_dev >= ST_LSM6DSX_MAX_SLV_NUM)
+			break;
+		id++;
+	}
+
+	return 0;
+}
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -460,6 +460,19 @@ config VCNL4000
 	 To compile this driver as a module, choose M here: the
 	 module will be called vcnl4000.

+config VCNL4035
+	tristate "VCNL4035 combined ALS and proximity sensor"
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	depends on I2C
+	help
+	 Say Y here if you want to build a driver for the Vishay VCNL4035,
+	 combined ambient light (ALS) and proximity sensor. Currently only ALS
+	 function is available.
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called vcnl4035.
+
 config VEML6070
 	tristate "VEML6070 UV A light sensor"
 	depends on I2C

--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_TSL2772)		+= tsl2772.o
 obj-$(CONFIG_TSL4531)		+= tsl4531.o
 obj-$(CONFIG_US5182D)		+= us5182d.o
 obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
+obj-$(CONFIG_VCNL4035)		+= vcnl4035.o
 obj-$(CONFIG_VEML6070)		+= veml6070.o
 obj-$(CONFIG_VL6180)		+= vl6180.o
 obj-$(CONFIG_ZOPT2201)		+= zopt2201.o
--- a/drivers/iio/light/vcnl4035.c
+++ b/drivers/iio/light/vcnl4035.c
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * VCNL4035 Ambient Light and Proximity Sensor - 7-bit I2C slave address 0x60
+ *
+ * Copyright (c) 2018, DENX Software Engineering GmbH
+ * Author: Parthiban Nallathambi <pn@denx.de>
+ *
+ * TODO: Proximity
+ */
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define VCNL4035_DRV_NAME	"vcnl4035"
+#define VCNL4035_IRQ_NAME	"vcnl4035_event"
+#define VCNL4035_REGMAP_NAME	"vcnl4035_regmap"
+
+/* Device registers */
+#define VCNL4035_ALS_CONF	0x00
+#define VCNL4035_ALS_THDH	0x01
+#define VCNL4035_ALS_THDL	0x02
+#define VCNL4035_ALS_DATA	0x0B
+#define VCNL4035_WHITE_DATA	0x0C
+#define VCNL4035_INT_FLAG	0x0D
+#define VCNL4035_DEV_ID		0x0E
+
+/* Register masks */
+#define VCNL4035_MODE_ALS_MASK		BIT(0)
+#define VCNL4035_MODE_ALS_WHITE_CHAN	BIT(8)
+#define VCNL4035_MODE_ALS_INT_MASK	BIT(1)
+#define VCNL4035_ALS_IT_MASK		GENMASK(7, 5)
+#define VCNL4035_ALS_PERS_MASK		GENMASK(3, 2)
+#define VCNL4035_INT_ALS_IF_H_MASK	BIT(12)
+#define VCNL4035_INT_ALS_IF_L_MASK	BIT(13)
+
+/* Default values */
+#define VCNL4035_MODE_ALS_ENABLE	BIT(0)
+#define VCNL4035_MODE_ALS_DISABLE	0x00
+#define VCNL4035_MODE_ALS_INT_ENABLE	BIT(1)
+#define VCNL4035_MODE_ALS_INT_DISABLE	0
+#define VCNL4035_DEV_ID_VAL		0x80
+#define VCNL4035_ALS_IT_DEFAULT		0x01
+#define VCNL4035_ALS_PERS_DEFAULT	0x00
+#define VCNL4035_ALS_THDH_DEFAULT	5000
+#define VCNL4035_ALS_THDL_DEFAULT	100
+#define VCNL4035_SLEEP_DELAY_MS		2000
+
+struct vcnl4035_data {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	unsigned int als_it_val;
+	unsigned int als_persistence;
+	unsigned int als_thresh_low;
+	unsigned int als_thresh_high;
+	struct iio_trigger *drdy_trigger0;
+};
+
+static inline bool vcnl4035_is_triggered(struct vcnl4035_data *data)
+{
+	int ret;
+	int reg;
+
+	ret = regmap_read(data->regmap, VCNL4035_INT_FLAG, &reg);
+	if (ret < 0)
+		return false;
+
+	return !!(reg &
+		(VCNL4035_INT_ALS_IF_H_MASK | VCNL4035_INT_ALS_IF_L_MASK));
+}
+
+static irqreturn_t vcnl4035_drdy_irq_thread(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct vcnl4035_data *data = iio_priv(indio_dev);
+
+	if (vcnl4035_is_triggered(data)) {
+		iio_push_event(indio_dev, IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
+							0,
+							IIO_EV_TYPE_THRESH,
+							IIO_EV_DIR_EITHER),
+				iio_get_time_ns(indio_dev));
+		iio_trigger_poll_chained(data->drdy_trigger0);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+/* Triggered buffer */
+static irqreturn_t vcnl4035_trigger_consumer_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct vcnl4035_data *data = iio_priv(indio_dev);
+	u8 buffer[ALIGN(sizeof(u16), sizeof(s64)) + sizeof(s64)];
+	int ret;
+
+	ret = regmap_read(data->regmap, VCNL4035_ALS_DATA, (int *)buffer);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"Trigger consumer can't read from sensor.\n");
+		goto fail_read;
+	}
+	iio_push_to_buffers_with_timestamp(indio_dev, buffer,
+					iio_get_time_ns(indio_dev));
+
+fail_read:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int vcnl4035_als_drdy_set_state(struct iio_trigger *trigger,
+					bool enable_drdy)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trigger);
+	struct vcnl4035_data *data = iio_priv(indio_dev);
+	int val = enable_drdy ? VCNL4035_MODE_ALS_INT_ENABLE :
+					VCNL4035_MODE_ALS_INT_DISABLE;
+
+	return regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
+				 VCNL4035_MODE_ALS_INT_MASK,
+				 val);
+}
+
+static const struct iio_trigger_ops vcnl4035_trigger_ops = {
+	.validate_device = iio_trigger_validate_own_device,
+	.set_trigger_state = vcnl4035_als_drdy_set_state,
+};
+
+static int vcnl4035_set_pm_runtime_state(struct vcnl4035_data *data, bool on)
+{
+	int ret;
+	struct device *dev = &data->client->dev;
+
+	if (on) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			pm_runtime_put_noidle(dev);
+	} else {
+		pm_runtime_mark_last_busy(dev);
+		ret = pm_runtime_put_autosuspend(dev);
+	}
+
+	return ret;
+}
+
+/*
+ *	Device IT	INT Time (ms)	Scale (lux/step)
+ *	000		50		0.064
+ *	001		100		0.032
+ *	010		200		0.016
+ *	100		400		0.008
+ *	101 - 111	800		0.004
+ * Values are proportional, so ALS INT is selected for input due to
+ * simplicity reason. Integration time value and scaling is
+ * calculated based on device INT value
+ *
+ * Raw value needs to be scaled using ALS steps
+ */
+static int vcnl4035_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan, int *val,
+			    int *val2, long mask)
+{
+	struct vcnl4035_data *data = iio_priv(indio_dev);
+	int ret;
+	int raw_data;
+	unsigned int reg;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = vcnl4035_set_pm_runtime_state(data, true);
+		if  (ret < 0)
+			return ret;
+
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (!ret) {
+			if (chan->channel)
+				reg = VCNL4035_ALS_DATA;
+			else
+				reg = VCNL4035_WHITE_DATA;
+			ret = regmap_read(data->regmap, reg, &raw_data);
+			iio_device_release_direct_mode(indio_dev);
+			if (!ret) {
+				*val = raw_data;
+				ret = IIO_VAL_INT;
+			}
+		}
+		vcnl4035_set_pm_runtime_state(data, false);
+		return ret;
+	case IIO_CHAN_INFO_INT_TIME:
+		*val = 50;
+		if (data->als_it_val)
+			*val = data->als_it_val * 100;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 64;
+		if (!data->als_it_val)
+			*val2 = 1000;
+		else
+			*val2 = data->als_it_val * 2 * 1000;
+		return IIO_VAL_FRACTIONAL;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl4035_write_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int val, int val2, long mask)
+{
+	int ret;
+	struct vcnl4035_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		if (val <= 0 || val > 800)
+			return -EINVAL;
+
+		ret = vcnl4035_set_pm_runtime_state(data, true);
+		if  (ret < 0)
+			return ret;
+
+		ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
+					 VCNL4035_ALS_IT_MASK,
+					 val / 100);
+		if (!ret)
+			data->als_it_val = val / 100;
+
+		vcnl4035_set_pm_runtime_state(data, false);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+/* No direct ABI for persistence and threshold, so eventing */
+static int vcnl4035_read_thresh(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir, enum iio_event_info info,
+		int *val, int *val2)
+{
+	struct vcnl4035_data *data = iio_priv(indio_dev);
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			*val = data->als_thresh_high;
+			return IIO_VAL_INT;
+		case IIO_EV_DIR_FALLING:
+			*val = data->als_thresh_low;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case IIO_EV_INFO_PERIOD:
+		*val = data->als_persistence;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+
+}
+
+static int vcnl4035_write_thresh(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir, enum iio_event_info info, int val,
+		int val2)
+{
+	struct vcnl4035_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		/* 16 bit threshold range 0 - 65535 */
+		if (val < 0 || val > 65535)
+			return -EINVAL;
+		if (dir == IIO_EV_DIR_RISING) {
+			if (val < data->als_thresh_low)
+				return -EINVAL;
+			ret = regmap_write(data->regmap, VCNL4035_ALS_THDH,
+					   val);
+			if (ret)
+				return ret;
+			data->als_thresh_high = val;
+		} else {
+			if (val > data->als_thresh_high)
+				return -EINVAL;
+			ret = regmap_write(data->regmap, VCNL4035_ALS_THDL,
+					   val);
+			if (ret)
+				return ret;
+			data->als_thresh_low = val;
+		}
+		return ret;
+	case IIO_EV_INFO_PERIOD:
+		/* allow only 1 2 4 8 as persistence value */
+		if (val < 0 || val > 8 || hweight8(val) != 1)
+			return -EINVAL;
+		ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
+					 VCNL4035_ALS_PERS_MASK, val);
+		if (!ret)
+			data->als_persistence = val;
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static IIO_CONST_ATTR_INT_TIME_AVAIL("50 100 200 400 800");
+
+static struct attribute *vcnl4035_attributes[] = {
+	&iio_const_attr_integration_time_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group vcnl4035_attribute_group = {
+	.attrs = vcnl4035_attributes,
+};
+
+static const struct iio_info vcnl4035_info = {
+	.read_raw		= vcnl4035_read_raw,
+	.write_raw		= vcnl4035_write_raw,
+	.read_event_value	= vcnl4035_read_thresh,
+	.write_event_value	= vcnl4035_write_thresh,
+	.attrs			= &vcnl4035_attribute_group,
+};
+
+static const struct iio_event_spec vcnl4035_event_spec[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_PERIOD),
+	},
+};
+
+enum vcnl4035_scan_index_order {
+	VCNL4035_CHAN_INDEX_LIGHT,
+	VCNL4035_CHAN_INDEX_WHITE_LED,
+};
+
+static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops = {
+	.validate_scan_mask = &iio_validate_scan_mask_onehot,
+};
+
+static const struct iio_chan_spec vcnl4035_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_INT_TIME) |
+				BIT(IIO_CHAN_INFO_SCALE),
+		.event_spec = vcnl4035_event_spec,
+		.num_event_specs = ARRAY_SIZE(vcnl4035_event_spec),
+		.scan_index = VCNL4035_CHAN_INDEX_LIGHT,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		},
+	},
+	{
+		.type = IIO_INTENSITY,
+		.channel = 1,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_BOTH,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_index = VCNL4035_CHAN_INDEX_WHITE_LED,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		},
+	},
+};
+
+static int vcnl4035_set_als_power_state(struct vcnl4035_data *data, u8 status)
+{
+	return regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
+					VCNL4035_MODE_ALS_MASK,
+					status);
+}
+
+static int vcnl4035_init(struct vcnl4035_data *data)
+{
+	int ret;
+	int id;
+
+	ret = regmap_read(data->regmap, VCNL4035_DEV_ID, &id);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Failed to read DEV_ID register\n");
+		return ret;
+	}
+
+	if (id != VCNL4035_DEV_ID_VAL) {
+		dev_err(&data->client->dev, "Wrong id, got %x, expected %x\n",
+			id, VCNL4035_DEV_ID_VAL);
+		return -ENODEV;
+	}
+
+	ret = vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	/* ALS white channel enable */
+	ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
+				 VCNL4035_MODE_ALS_WHITE_CHAN,
+				 1);
+	if (ret) {
+		dev_err(&data->client->dev, "set white channel enable %d\n",
+			ret);
+		return ret;
+	}
+
+	/* set default integration time - 100 ms for ALS */
+	ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
+				 VCNL4035_ALS_IT_MASK,
+				 VCNL4035_ALS_IT_DEFAULT);
+	if (ret) {
+		dev_err(&data->client->dev, "set default ALS IT returned %d\n",
+			ret);
+		return ret;
+	}
+	data->als_it_val = VCNL4035_ALS_IT_DEFAULT;
+
+	/* set default persistence time - 1 for ALS */
+	ret = regmap_update_bits(data->regmap, VCNL4035_ALS_CONF,
+				 VCNL4035_ALS_PERS_MASK,
+				 VCNL4035_ALS_PERS_DEFAULT);
+	if (ret) {
+		dev_err(&data->client->dev, "set default PERS returned %d\n",
+			ret);
+		return ret;
+	}
+	data->als_persistence = VCNL4035_ALS_PERS_DEFAULT;
+
+	/* set default HIGH threshold for ALS */
+	ret = regmap_write(data->regmap, VCNL4035_ALS_THDH,
+				VCNL4035_ALS_THDH_DEFAULT);
+	if (ret) {
+		dev_err(&data->client->dev, "set default THDH returned %d\n",
+			ret);
+		return ret;
+	}
+	data->als_thresh_high = VCNL4035_ALS_THDH_DEFAULT;
+
+	/* set default LOW threshold for ALS */
+	ret = regmap_write(data->regmap, VCNL4035_ALS_THDL,
+				VCNL4035_ALS_THDL_DEFAULT);
+	if (ret) {
+		dev_err(&data->client->dev, "set default THDL returned %d\n",
+			ret);
+		return ret;
+	}
+	data->als_thresh_low = VCNL4035_ALS_THDL_DEFAULT;
+
+	return 0;
+}
+
+static bool vcnl4035_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case VCNL4035_ALS_CONF:
+	case VCNL4035_DEV_ID:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_config vcnl4035_regmap_config = {
+	.name		= VCNL4035_REGMAP_NAME,
+	.reg_bits	= 8,
+	.val_bits	= 16,
+	.max_register	= VCNL4035_DEV_ID,
+	.cache_type	= REGCACHE_RBTREE,
+	.volatile_reg	= vcnl4035_is_volatile_reg,
+	.val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static int vcnl4035_probe_trigger(struct iio_dev *indio_dev)
+{
+	int ret;
+	struct vcnl4035_data *data = iio_priv(indio_dev);
+
+	data->drdy_trigger0 = devm_iio_trigger_alloc(
+			indio_dev->dev.parent,
+			"%s-dev%d", indio_dev->name, indio_dev->id);
+	if (!data->drdy_trigger0)
+		return -ENOMEM;
+
+	data->drdy_trigger0->dev.parent = indio_dev->dev.parent;
+	data->drdy_trigger0->ops = &vcnl4035_trigger_ops;
+	iio_trigger_set_drvdata(data->drdy_trigger0, indio_dev);
+	ret = devm_iio_trigger_register(indio_dev->dev.parent,
+					data->drdy_trigger0);
+	if (ret) {
+		dev_err(&data->client->dev, "iio trigger register failed\n");
+		return ret;
+	}
+
+	/* Trigger setup */
+	ret = devm_iio_triggered_buffer_setup(indio_dev->dev.parent, indio_dev,
+					NULL, vcnl4035_trigger_consumer_handler,
+					&iio_triggered_buffer_setup_ops);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "iio triggered buffer setup failed\n");
+		return ret;
+	}
+
+	/* IRQ to trigger mapping */
+	ret = devm_request_threaded_irq(&data->client->dev, data->client->irq,
+			NULL, vcnl4035_drdy_irq_thread,
+			IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+			VCNL4035_IRQ_NAME, indio_dev);
+	if (ret < 0)
+		dev_err(&data->client->dev, "request irq %d for trigger0 failed\n",
+				data->client->irq);
+	return ret;
+}
+
+static int vcnl4035_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct vcnl4035_data *data;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	regmap = devm_regmap_init_i2c(client, &vcnl4035_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "regmap_init failed!\n");
+		return PTR_ERR(regmap);
+	}
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	data->regmap = regmap;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &vcnl4035_info;
+	indio_dev->name = VCNL4035_DRV_NAME;
+	indio_dev->channels = vcnl4035_channels;
+	indio_dev->num_channels = ARRAY_SIZE(vcnl4035_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = vcnl4035_init(data);
+	if (ret < 0) {
+		dev_err(&client->dev, "vcnl4035 chip init failed\n");
+		return ret;
+	}
+
+	if (client->irq > 0) {
+		ret = vcnl4035_probe_trigger(indio_dev);
+		if (ret < 0) {
+			dev_err(&client->dev, "vcnl4035 unable init trigger\n");
+			goto fail_poweroff;
+		}
+	}
+
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret < 0)
+		goto fail_poweroff;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto fail_poweroff;
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev, VCNL4035_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	return 0;
+
+fail_poweroff:
+	vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_DISABLE);
+	return ret;
+}
+
+static int vcnl4035_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	pm_runtime_dont_use_autosuspend(&client->dev);
+	pm_runtime_disable(&client->dev);
+	iio_device_unregister(indio_dev);
+	pm_runtime_set_suspended(&client->dev);
+
+	return vcnl4035_set_als_power_state(iio_priv(indio_dev),
+					VCNL4035_MODE_ALS_DISABLE);
+}
+
+static int __maybe_unused vcnl4035_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct vcnl4035_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_DISABLE);
+	regcache_mark_dirty(data->regmap);
+
+	return ret;
+}
+
+static int __maybe_unused vcnl4035_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct vcnl4035_data *data = iio_priv(indio_dev);
+	int ret;
+
+	regcache_sync(data->regmap);
+	ret = vcnl4035_set_als_power_state(data, VCNL4035_MODE_ALS_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	/* wait for 1 ALS integration cycle */
+	msleep(data->als_it_val * 100);
+
+	return 0;
+}
+
+static const struct dev_pm_ops vcnl4035_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(vcnl4035_runtime_suspend,
+			   vcnl4035_runtime_resume, NULL)
+};
+
+static const struct of_device_id vcnl4035_of_match[] = {
+	{ .compatible = "vishay,vcnl4035", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, vcnl4035_of_match);
+
+static struct i2c_driver vcnl4035_driver = {
+	.driver = {
+		.name   = VCNL4035_DRV_NAME,
+		.pm	= &vcnl4035_pm_ops,
+		.of_match_table = vcnl4035_of_match,
+	},
+	.probe  = vcnl4035_probe,
+	.remove	= vcnl4035_remove,
+};
+
+module_i2c_driver(vcnl4035_driver);
+
+MODULE_AUTHOR("Parthiban Nallathambi <pn@denx.de>");
+MODULE_DESCRIPTION("VCNL4035 Ambient Light Sensor driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -175,4 +175,33 @@ config SENSORS_HMC5843_SPI
 	  - hmc5843_core (core functions)
 	  - hmc5843_spi (support for HMC5983)

+config SENSORS_RM3100
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config SENSORS_RM3100_I2C
+	tristate "PNI RM3100 3-Axis Magnetometer (I2C)"
+	depends on I2C
+	select SENSORS_RM3100
+	select REGMAP_I2C
+	help
+	  Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
+
+	  This driver can also be compiled as a module.
+	  To compile this driver as a module, choose M here: the module
+	  will be called rm3100-i2c.
+
+config SENSORS_RM3100_SPI
+	tristate "PNI RM3100 3-Axis Magnetometer (SPI)"
+	depends on SPI_MASTER
+	select SENSORS_RM3100
+	select REGMAP_SPI
+	help
+	  Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
+
+	  This driver can also be compiled as a module.
+	  To compile this driver as a module, choose M here: the module
+	  will be called rm3100-spi.
+
 endmenu
--- a/drivers/iio/magnetometer/Makefile
+++ b/drivers/iio/magnetometer/Makefile
@@ -24,3 +24,7 @@ obj-$(CONFIG_IIO_ST_MAGN_SPI_3AXIS) += st_magn_spi.o
 obj-$(CONFIG_SENSORS_HMC5843)		+= hmc5843_core.o
 obj-$(CONFIG_SENSORS_HMC5843_I2C)	+= hmc5843_i2c.o
 obj-$(CONFIG_SENSORS_HMC5843_SPI)	+= hmc5843_spi.o
+
+obj-$(CONFIG_SENSORS_RM3100)		+= rm3100-core.o
+obj-$(CONFIG_SENSORS_RM3100_I2C)	+= rm3100-i2c.o
+obj-$(CONFIG_SENSORS_RM3100_SPI)	+= rm3100-spi.o
--- a/drivers/iio/magnetometer/rm3100-core.c
+++ b/drivers/iio/magnetometer/rm3100-core.c
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PNI RM3100 3-axis geomagnetic sensor driver core.
+ *
+ * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com>
+ *
+ * User Manual available at
+ * <https://www.pnicorp.com/download/rm3100-user-manual/>
+ *
+ * TODO: event generation, pm.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#include "rm3100.h"
+
+/* Cycle Count Registers. */
+#define RM3100_REG_CC_X			0x05
+#define RM3100_REG_CC_Y			0x07
+#define RM3100_REG_CC_Z			0x09
+
+/* Poll Measurement Mode register. */
+#define RM3100_REG_POLL			0x00
+#define		RM3100_POLL_X		BIT(4)
+#define		RM3100_POLL_Y		BIT(5)
+#define		RM3100_POLL_Z		BIT(6)
+
+/* Continuous Measurement Mode register. */
+#define RM3100_REG_CMM			0x01
+#define		RM3100_CMM_START	BIT(0)
+#define		RM3100_CMM_X		BIT(4)
+#define		RM3100_CMM_Y		BIT(5)
+#define		RM3100_CMM_Z		BIT(6)
+
+/* TiMe Rate Configuration register. */
+#define RM3100_REG_TMRC			0x0B
+#define RM3100_TMRC_OFFSET		0x92
+
+/* Result Status register. */
+#define RM3100_REG_STATUS		0x34
+#define		RM3100_STATUS_DRDY	BIT(7)
+
+/* Measurement result registers. */
+#define RM3100_REG_MX2			0x24
+#define RM3100_REG_MY2			0x27
+#define RM3100_REG_MZ2			0x2a
+
+#define RM3100_W_REG_START		RM3100_REG_POLL
+#define RM3100_W_REG_END		RM3100_REG_TMRC
+#define RM3100_R_REG_START		RM3100_REG_POLL
+#define RM3100_R_REG_END		RM3100_REG_STATUS
+#define RM3100_V_REG_START		RM3100_REG_POLL
+#define RM3100_V_REG_END		RM3100_REG_STATUS
+
+/*
+ * This is computed by hand, is the sum of channel storage bits and padding
+ * bits, which is 4+4+4+12=24 in here.
+ */
+#define RM3100_SCAN_BYTES		24
+
+#define RM3100_CMM_AXIS_SHIFT		4
+
+struct rm3100_data {
+	struct regmap *regmap;
+	struct completion measuring_done;
+	bool use_interrupt;
+	int conversion_time;
+	int scale;
+	u8 buffer[RM3100_SCAN_BYTES];
+	struct iio_trigger *drdy_trig;
+
+	/*
+	 * This lock is for protecting the consistency of series of i2c
+	 * operations, that is, to make sure a measurement process will
+	 * not be interrupted by a set frequency operation, which should
+	 * be taken where a series of i2c operation starts, released where
+	 * the operation ends.
+	 */
+	struct mutex lock;
+};
+
+static const struct regmap_range rm3100_readable_ranges[] = {
+	regmap_reg_range(RM3100_R_REG_START, RM3100_R_REG_END),
+};
+
+const struct regmap_access_table rm3100_readable_table = {
+	.yes_ranges = rm3100_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(rm3100_readable_ranges),
+};
+EXPORT_SYMBOL_GPL(rm3100_readable_table);
+
+static const struct regmap_range rm3100_writable_ranges[] = {
+	regmap_reg_range(RM3100_W_REG_START, RM3100_W_REG_END),
+};
+
+const struct regmap_access_table rm3100_writable_table = {
+	.yes_ranges = rm3100_writable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(rm3100_writable_ranges),
+};
+EXPORT_SYMBOL_GPL(rm3100_writable_table);
+
+static const struct regmap_range rm3100_volatile_ranges[] = {
+	regmap_reg_range(RM3100_V_REG_START, RM3100_V_REG_END),
+};
+
+const struct regmap_access_table rm3100_volatile_table = {
+	.yes_ranges = rm3100_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(rm3100_volatile_ranges),
+};
+EXPORT_SYMBOL_GPL(rm3100_volatile_table);
+
+static irqreturn_t rm3100_thread_fn(int irq, void *d)
+{
+	struct iio_dev *indio_dev = d;
+	struct rm3100_data *data = iio_priv(indio_dev);
+
+	/*
+	 * Write operation to any register or read operation
+	 * to first byte of results will clear the interrupt.
+	 */
+	regmap_write(data->regmap, RM3100_REG_POLL, 0);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rm3100_irq_handler(int irq, void *d)
+{
+	struct iio_dev *indio_dev = d;
+	struct rm3100_data *data = iio_priv(indio_dev);
+
+	switch (indio_dev->currentmode) {
+	case INDIO_DIRECT_MODE:
+		complete(&data->measuring_done);
+		break;
+	case INDIO_BUFFER_TRIGGERED:
+		iio_trigger_poll(data->drdy_trig);
+		break;
+	default:
+		dev_err(indio_dev->dev.parent,
+			"device mode out of control, current mode: %d",
+			indio_dev->currentmode);
+	}
+
+	return IRQ_WAKE_THREAD;
+}
+
+static int rm3100_wait_measurement(struct rm3100_data *data)
+{
+	struct regmap *regmap = data->regmap;
+	unsigned int val;
+	int tries = 20;
+	int ret;
+
+	/*
+	 * A read cycle of 400kbits i2c bus is about 20us, plus the time
+	 * used for scheduling, a read cycle of fast mode of this device
+	 * can reach 1.7ms, it may be possible for data to arrive just
+	 * after we check the RM3100_REG_STATUS. In this case, irq_handler is
+	 * called before measuring_done is reinitialized, it will wait
+	 * forever for data that has already been ready.
+	 * Reinitialize measuring_done before looking up makes sure we
+	 * will always capture interrupt no matter when it happens.
+	 */
+	if (data->use_interrupt)
+		reinit_completion(&data->measuring_done);
+
+	ret = regmap_read(regmap, RM3100_REG_STATUS, &val);
+	if (ret < 0)
+		return ret;
+
+	if ((val & RM3100_STATUS_DRDY) != RM3100_STATUS_DRDY) {
+		if (data->use_interrupt) {
+			ret = wait_for_completion_timeout(&data->measuring_done,
+				msecs_to_jiffies(data->conversion_time));
+			if (!ret)
+				return -ETIMEDOUT;
+		} else {
+			do {
+				usleep_range(1000, 5000);
+
+				ret = regmap_read(regmap, RM3100_REG_STATUS,
+						  &val);
+				if (ret < 0)
+					return ret;
+
+				if (val & RM3100_STATUS_DRDY)
+					break;
+			} while (--tries);
+			if (!tries)
+				return -ETIMEDOUT;
+		}
+	}
+	return 0;
+}
+
+static int rm3100_read_mag(struct rm3100_data *data, int idx, int *val)
+{
+	struct regmap *regmap = data->regmap;
+	u8 buffer[3];
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = regmap_write(regmap, RM3100_REG_POLL, BIT(4 + idx));
+	if (ret < 0)
+		goto unlock_return;
+
+	ret = rm3100_wait_measurement(data);
+	if (ret < 0)
+		goto unlock_return;
+
+	ret = regmap_bulk_read(regmap, RM3100_REG_MX2 + 3 * idx, buffer, 3);
+	if (ret < 0)
+		goto unlock_return;
+	mutex_unlock(&data->lock);
+
+	*val = sign_extend32((buffer[0] << 16) | (buffer[1] << 8) | buffer[2],
+			     23);
+
+	return IIO_VAL_INT;
+
+unlock_return:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+#define RM3100_CHANNEL(axis, idx)					\
+	{								\
+		.type = IIO_MAGN,					\
+		.modified = 1,						\
+		.channel2 = IIO_MOD_##axis,				\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
+		.scan_index = idx,					\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = 24,					\
+			.storagebits = 32,				\
+			.shift = 8,					\
+			.endianness = IIO_BE,				\
+		},							\
+	}
+
+static const struct iio_chan_spec rm3100_channels[] = {
+	RM3100_CHANNEL(X, 0),
+	RM3100_CHANNEL(Y, 1),
+	RM3100_CHANNEL(Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
+	"600 300 150 75 37 18 9 4.5 2.3 1.2 0.6 0.3 0.015 0.075"
+);
+
+static struct attribute *rm3100_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group rm3100_attribute_group = {
+	.attrs = rm3100_attributes,
+};
+
+#define RM3100_SAMP_NUM			14
+
+/*
+ * Frequency : rm3100_samp_rates[][0].rm3100_samp_rates[][1]Hz.
+ * Time between reading: rm3100_sam_rates[][2]ms.
+ * The first one is actually 1.7ms.
+ */
+static const int rm3100_samp_rates[RM3100_SAMP_NUM][3] = {
+	{600, 0, 2}, {300, 0, 3}, {150, 0, 7}, {75, 0, 13}, {37, 0, 27},
+	{18, 0, 55}, {9, 0, 110}, {4, 500000, 220}, {2, 300000, 440},
+	{1, 200000, 800}, {0, 600000, 1600}, {0, 300000, 3300},
+	{0, 15000, 6700},  {0, 75000, 13000}
+};
+
+static int rm3100_get_samp_freq(struct rm3100_data *data, int *val, int *val2)
+{
+	unsigned int tmp;
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = regmap_read(data->regmap, RM3100_REG_TMRC, &tmp);
+	mutex_unlock(&data->lock);
+	if (ret < 0)
+		return ret;
+	*val = rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][0];
+	*val2 = rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][1];
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int rm3100_set_cycle_count(struct rm3100_data *data, int val)
+{
+	int ret;
+	u8 i;
+
+	for (i = 0; i < 3; i++) {
+		ret = regmap_write(data->regmap, RM3100_REG_CC_X + 2 * i, val);
+		if (ret < 0)
+			return ret;
+	}
+
+	/*
+	 * The scale of this sensor depends on the cycle count value, these
+	 * three values are corresponding to the cycle count value 50, 100,
+	 * 200. scale = output / gain * 10^4.
+	 */
+	switch (val) {
+	case 50:
+		data->scale = 500;
+		break;
+	case 100:
+		data->scale = 263;
+		break;
+	/*
+	 * case 200:
+	 * This function will never be called by users' code, so here we
+	 * assume that it will never get a wrong parameter.
+	 */
+	default:
+		data->scale = 133;
+	}
+
+	return 0;
+}
+
+static int rm3100_set_samp_freq(struct iio_dev *indio_dev, int val, int val2)
+{
+	struct rm3100_data *data = iio_priv(indio_dev);
+	struct regmap *regmap = data->regmap;
+	unsigned int cycle_count;
+	int ret;
+	int i;
+
+	mutex_lock(&data->lock);
+	/* All cycle count registers use the same value. */
+	ret = regmap_read(regmap, RM3100_REG_CC_X, &cycle_count);
+	if (ret < 0)
+		goto unlock_return;
+
+	for (i = 0; i < RM3100_SAMP_NUM; i++) {
+		if (val == rm3100_samp_rates[i][0] &&
+		    val2 == rm3100_samp_rates[i][1])
+			break;
+	}
+	if (i == RM3100_SAMP_NUM) {
+		ret = -EINVAL;
+		goto unlock_return;
+	}
+
+	ret = regmap_write(regmap, RM3100_REG_TMRC, i + RM3100_TMRC_OFFSET);
+	if (ret < 0)
+		goto unlock_return;
+
+	/* Checking if cycle count registers need changing. */
+	if (val == 600 && cycle_count == 200) {
+		ret = rm3100_set_cycle_count(data, 100);
+		if (ret < 0)
+			goto unlock_return;
+	} else if (val != 600 && cycle_count == 100) {
+		ret = rm3100_set_cycle_count(data, 200);
+		if (ret < 0)
+			goto unlock_return;
+	}
+
+	if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
+		/* Writing TMRC registers requires CMM reset. */
+		ret = regmap_write(regmap, RM3100_REG_CMM, 0);
+		if (ret < 0)
+			goto unlock_return;
+		ret = regmap_write(data->regmap, RM3100_REG_CMM,
+			(*indio_dev->active_scan_mask & 0x7) <<
+			RM3100_CMM_AXIS_SHIFT | RM3100_CMM_START);
+		if (ret < 0)
+			goto unlock_return;
+	}
+	mutex_unlock(&data->lock);
+
+	data->conversion_time = rm3100_samp_rates[i][2] * 2;
+	return 0;
+
+unlock_return:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int rm3100_read_raw(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan,
+			   int *val, int *val2, long mask)
+{
+	struct rm3100_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+
+		ret = rm3100_read_mag(data, chan->scan_index, val);
+		iio_device_release_direct_mode(indio_dev);
+
+		return ret;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = data->scale;
+
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return rm3100_get_samp_freq(data, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int rm3100_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return rm3100_set_samp_freq(indio_dev, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info rm3100_info = {
+	.attrs = &rm3100_attribute_group,
+	.read_raw = rm3100_read_raw,
+	.write_raw = rm3100_write_raw,
+};
+
+static int rm3100_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct rm3100_data *data = iio_priv(indio_dev);
+
+	/* Starting channels enabled. */
+	return regmap_write(data->regmap, RM3100_REG_CMM,
+		(*indio_dev->active_scan_mask & 0x7) << RM3100_CMM_AXIS_SHIFT |
+		RM3100_CMM_START);
+}
+
+static int rm3100_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct rm3100_data *data = iio_priv(indio_dev);
+
+	return regmap_write(data->regmap, RM3100_REG_CMM, 0);
+}
+
+static const struct iio_buffer_setup_ops rm3100_buffer_ops = {
+	.preenable = rm3100_buffer_preenable,
+	.postenable = iio_triggered_buffer_postenable,
+	.predisable = iio_triggered_buffer_predisable,
+	.postdisable = rm3100_buffer_postdisable,
+};
+
+static irqreturn_t rm3100_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	unsigned long scan_mask = *indio_dev->active_scan_mask;
+	unsigned int mask_len = indio_dev->masklength;
+	struct rm3100_data *data = iio_priv(indio_dev);
+	struct regmap *regmap = data->regmap;
+	int ret, i, bit;
+
+	mutex_lock(&data->lock);
+	switch (scan_mask) {
+	case BIT(0) | BIT(1) | BIT(2):
+		ret = regmap_bulk_read(regmap, RM3100_REG_MX2, data->buffer, 9);
+		mutex_unlock(&data->lock);
+		if (ret < 0)
+			goto done;
+		/* Convert XXXYYYZZZxxx to XXXxYYYxZZZx. x for paddings. */
+		for (i = 2; i > 0; i--)
+			memmove(data->buffer + i * 4, data->buffer + i * 3, 3);
+		break;
+	case BIT(0) | BIT(1):
+		ret = regmap_bulk_read(regmap, RM3100_REG_MX2, data->buffer, 6);
+		mutex_unlock(&data->lock);
+		if (ret < 0)
+			goto done;
+		memmove(data->buffer + 4, data->buffer + 3, 3);
+		break;
+	case BIT(1) | BIT(2):
+		ret = regmap_bulk_read(regmap, RM3100_REG_MY2, data->buffer, 6);
+		mutex_unlock(&data->lock);
+		if (ret < 0)
+			goto done;
+		memmove(data->buffer + 4, data->buffer + 3, 3);
+		break;
+	case BIT(0) | BIT(2):
+		ret = regmap_bulk_read(regmap, RM3100_REG_MX2, data->buffer, 9);
+		mutex_unlock(&data->lock);
+		if (ret < 0)
+			goto done;
+		memmove(data->buffer + 4, data->buffer + 6, 3);
+		break;
+	default:
+		for_each_set_bit(bit, &scan_mask, mask_len) {
+			ret = regmap_bulk_read(regmap, RM3100_REG_MX2 + 3 * bit,
+					       data->buffer, 3);
+			if (ret < 0) {
+				mutex_unlock(&data->lock);
+				goto done;
+			}
+		}
+		mutex_unlock(&data->lock);
+	}
+	/*
+	 * Always using the same buffer so that we wouldn't need to set the
+	 * paddings to 0 in case of leaking any data.
+	 */
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+					   pf->timestamp);
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq)
+{
+	struct iio_dev *indio_dev;
+	struct rm3100_data *data;
+	unsigned int tmp;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->regmap = regmap;
+
+	mutex_init(&data->lock);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->name = "rm3100";
+	indio_dev->info = &rm3100_info;
+	indio_dev->channels = rm3100_channels;
+	indio_dev->num_channels = ARRAY_SIZE(rm3100_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_TRIGGERED;
+	indio_dev->currentmode = INDIO_DIRECT_MODE;
+
+	if (!irq)
+		data->use_interrupt = false;
+	else {
+		data->use_interrupt = true;
+
+		init_completion(&data->measuring_done);
+		ret = devm_request_threaded_irq(dev,
+						irq,
+						rm3100_irq_handler,
+						rm3100_thread_fn,
+						IRQF_TRIGGER_HIGH |
+						IRQF_ONESHOT,
+						indio_dev->name,
+						indio_dev);
+		if (ret < 0) {
+			dev_err(dev, "request irq line failed.\n");
+			return ret;
+		}
+
+		data->drdy_trig = devm_iio_trigger_alloc(dev, "%s-drdy%d",
+							 indio_dev->name,
+							 indio_dev->id);
+		if (!data->drdy_trig)
+			return -ENOMEM;
+
+		data->drdy_trig->dev.parent = dev;
+		ret = devm_iio_trigger_register(dev, data->drdy_trig);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					      &iio_pollfunc_store_time,
+					      rm3100_trigger_handler,
+					      &rm3100_buffer_ops);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(regmap, RM3100_REG_TMRC, &tmp);
+	if (ret < 0)
+		return ret;
+	/* Initializing max wait time, which is double conversion time. */
+	data->conversion_time = rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][2]
+				* 2;
+
+	/* Cycle count values may not be what we want. */
+	if ((tmp - RM3100_TMRC_OFFSET) == 0)
+		rm3100_set_cycle_count(data, 100);
+	else
+		rm3100_set_cycle_count(data, 200);
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_GPL(rm3100_common_probe);
+
+MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>");
+MODULE_DESCRIPTION("PNI RM3100 3-axis magnetometer i2c driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/magnetometer/rm3100-i2c.c
+++ b/drivers/iio/magnetometer/rm3100-i2c.c
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for PNI RM3100 3-axis geomagnetic sensor on a i2c bus.
+ *
+ * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com>
+ *
+ * i2c slave address: 0x20 + SA1 << 1 + SA0.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+
+#include "rm3100.h"
+
+static const struct regmap_config rm3100_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.rd_table = &rm3100_readable_table,
+	.wr_table = &rm3100_writable_table,
+	.volatile_table = &rm3100_volatile_table,
+
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int rm3100_probe(struct i2c_client *client)
+{
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(client, &rm3100_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return rm3100_common_probe(&client->dev, regmap, client->irq);
+}
+
+static const struct of_device_id rm3100_dt_match[] = {
+	{ .compatible = "pni,rm3100", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rm3100_dt_match);
+
+static struct i2c_driver rm3100_driver = {
+	.driver = {
+		.name = "rm3100-i2c",
+		.of_match_table = rm3100_dt_match,
+	},
+	.probe_new = rm3100_probe,
+};
+module_i2c_driver(rm3100_driver);
+
+MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>");
+MODULE_DESCRIPTION("PNI RM3100 3-axis magnetometer i2c driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/magnetometer/rm3100-spi.c
+++ b/drivers/iio/magnetometer/rm3100-spi.c
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for PNI RM3100 3-axis geomagnetic sensor on a spi bus.
+ *
+ * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include "rm3100.h"
+
+static const struct regmap_config rm3100_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.rd_table = &rm3100_readable_table,
+	.wr_table = &rm3100_writable_table,
+	.volatile_table = &rm3100_volatile_table,
+
+	.read_flag_mask = 0x80,
+
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int rm3100_probe(struct spi_device *spi)
+{
+	struct regmap *regmap;
+	int ret;
+
+	/* Actually this device supports both mode 0 and mode 3. */
+	spi->mode = SPI_MODE_0;
+	/* Data rates cannot exceed 1Mbits. */
+	spi->max_speed_hz = 1000000;
+	spi->bits_per_word = 8;
+	ret = spi_setup(spi);
+	if (ret)
+		return ret;
+
+	regmap = devm_regmap_init_spi(spi, &rm3100_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	return rm3100_common_probe(&spi->dev, regmap, spi->irq);
+}
+
+static const struct of_device_id rm3100_dt_match[] = {
+	{ .compatible = "pni,rm3100", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rm3100_dt_match);
+
+static struct spi_driver rm3100_driver = {
+	.driver = {
+		.name = "rm3100-spi",
+		.of_match_table = rm3100_dt_match,
+	},
+	.probe = rm3100_probe,
+};
+module_spi_driver(rm3100_driver);
+
+MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>");
+MODULE_DESCRIPTION("PNI RM3100 3-axis magnetometer spi driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/iio/magnetometer/rm3100.h
+++ b/drivers/iio/magnetometer/rm3100.h
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com>
+ */
+
+#ifndef RM3100_CORE_H
+#define RM3100_CORE_H
+
+#include <linux/regmap.h>
+
+extern const struct regmap_access_table rm3100_readable_table;
+extern const struct regmap_access_table rm3100_writable_table;
+extern const struct regmap_access_table rm3100_volatile_table;
+
+int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq);
+
+#endif /* RM3100_CORE_H */
--- a/drivers/iio/magnetometer/st_magn.h
+++ b/drivers/iio/magnetometer/st_magn.h
@@ -20,6 +20,7 @@
 #define LIS3MDL_MAGN_DEV_NAME		"lis3mdl"
 #define LSM303AGR_MAGN_DEV_NAME		"lsm303agr_magn"
 #define LIS2MDL_MAGN_DEV_NAME		"lis2mdl"
+#define LSM9DS1_MAGN_DEV_NAME		"lsm9ds1_magn"

 int st_magn_common_probe(struct iio_dev *indio_dev);
 void st_magn_common_remove(struct iio_dev *indio_dev);

--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -29,9 +29,9 @@
 #define ST_MAGN_NUMBER_DATA_CHANNELS		3

 /* DEFAULT VALUE FOR SENSORS */
-#define ST_MAGN_DEFAULT_OUT_X_H_ADDR		0X03
-#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR		0X07
-#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR		0X05
+#define ST_MAGN_DEFAULT_OUT_X_H_ADDR		0x03
+#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR		0x07
+#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR		0x05

 /* FULLSCALE */
 #define ST_MAGN_FS_AVL_1300MG			1300
@@ -267,6 +267,7 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LIS3MDL_MAGN_DEV_NAME,
+			[1] = LSM9DS1_MAGN_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_magn_2_16bit_channels,
 		.odr = {
@@ -315,6 +316,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
 				},
 			},
 		},
+		.bdu = {
+			.addr = 0x24,
+			.mask = 0x40,
+		},
 		.drdy_irq = {
 			/* drdy line is routed drdy pin */
 			.stat_drdy = {

--- a/drivers/iio/magnetometer/st_magn_i2c.c
+++ b/drivers/iio/magnetometer/st_magn_i2c.c
@@ -44,6 +44,10 @@ static const struct of_device_id st_magn_of_match[] = {
 		.compatible = "st,lis2mdl",
 		.data = LIS2MDL_MAGN_DEV_NAME,
 	},
+	{
+		.compatible = "st,lsm9ds1-magn",
+		.data = LSM9DS1_MAGN_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_magn_of_match);
@@ -90,6 +94,7 @@ static const struct i2c_device_id st_magn_id_table[] = {
 	{ LIS3MDL_MAGN_DEV_NAME },
 	{ LSM303AGR_MAGN_DEV_NAME },
 	{ LIS2MDL_MAGN_DEV_NAME },
+	{ LSM9DS1_MAGN_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_magn_id_table);

--- a/drivers/iio/magnetometer/st_magn_spi.c
+++ b/drivers/iio/magnetometer/st_magn_spi.c
@@ -23,6 +23,8 @@
 * For new single-chip sensors use <device_name> as compatible string.
 * For old single-chip devices keep <device_name>-magn to maintain
 * compatibility
+ * For multi-chip devices, use <device_name>-magn to distinguish which
+ * capability is being used
 */
 static const struct of_device_id st_magn_of_match[] = {
 	{
@@ -37,6 +39,10 @@ static const struct of_device_id st_magn_of_match[] = {
 		.compatible = "st,lis2mdl",
 		.data = LIS2MDL_MAGN_DEV_NAME,
 	},
+	{
+		.compatible = "st,lsm9ds1-magn",
+		.data = LSM9DS1_MAGN_DEV_NAME,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, st_magn_of_match);
@@ -79,6 +85,7 @@ static const struct spi_device_id st_magn_id_table[] = {
 	{ LIS3MDL_MAGN_DEV_NAME },
 	{ LSM303AGR_MAGN_DEV_NAME },
 	{ LIS2MDL_MAGN_DEV_NAME },
+	{ LSM9DS1_MAGN_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_magn_id_table);

--- a/drivers/iio/potentiometer/mcp4131.c
+++ b/drivers/iio/potentiometer/mcp4131.c
@@ -42,6 +42,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/spi/spi.h>

 #define MCP4131_WRITE		(0x00 << 2)
@@ -243,7 +244,7 @@ static int mcp4131_probe(struct spi_device *spi)
 {
 	int err;
 	struct device *dev = &spi->dev;
-	unsigned long devid = spi_get_device_id(spi)->driver_data;
+	unsigned long devid;
 	struct mcp4131_data *data;
 	struct iio_dev *indio_dev;

@@ -254,7 +255,11 @@ static int mcp4131_probe(struct spi_device *spi)
 	data = iio_priv(indio_dev);
 	spi_set_drvdata(spi, indio_dev);
 	data->spi = spi;
+	data->cfg = of_device_get_match_data(&spi->dev);
+	if (!data->cfg) {
+		devid = spi_get_device_id(spi)->driver_data;
 		data->cfg = &mcp4131_cfg[devid];
+	}

 	mutex_init(&data->lock);

@@ -273,7 +278,6 @@ static int mcp4131_probe(struct spi_device *spi)
 	return 0;
 }

-#if defined(CONFIG_OF)
 static const struct of_device_id mcp4131_dt_ids[] = {
 	{ .compatible = "microchip,mcp4131-502",
 		.data = &mcp4131_cfg[MCP413x_502] },
@@ -406,7 +410,6 @@ static const struct of_device_id mcp4131_dt_ids[] = {
 	{}
 };
 MODULE_DEVICE_TABLE(of, mcp4131_dt_ids);
-#endif /* CONFIG_OF */

 static const struct spi_device_id mcp4131_id[] = {
 	{ "mcp4131-502", MCP413x_502 },

--- a/drivers/iio/potentiometer/tpl0102.c
+++ b/drivers/iio/potentiometer/tpl0102.c
@@ -15,7 +15,7 @@

 struct tpl0102_cfg {
 	int wipers;
-	int max_pos;
+	int avail[3];
 	int kohms;
 };

@@ -28,16 +28,16 @@ enum tpl0102_type {

 static const struct tpl0102_cfg tpl0102_cfg[] = {
 	/* on-semiconductor parts */
-	[CAT5140_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, },
-	[CAT5140_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, },
+	[CAT5140_503] = { .wipers = 1, .avail = { 0, 1, 255 }, .kohms = 50, },
+	[CAT5140_104] = { .wipers = 1, .avail = { 0, 1, 255 }, .kohms = 100, },
 	/* ti parts */
-	[TPL0102_104] = { .wipers = 2, .max_pos = 256, .kohms = 100 },
-	[TPL0401_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, },
+	[TPL0102_104] = { .wipers = 2, .avail = { 0, 1, 255 }, .kohms = 100 },
+	[TPL0401_103] = { .wipers = 1, .avail = { 0, 1, 127 }, .kohms = 10, },
 };

 struct tpl0102_data {
 	struct regmap *regmap;
-	unsigned long devid;
+	const struct tpl0102_cfg *cfg;
 };

 static const struct regmap_config tpl0102_regmap_config = {
@@ -52,6 +52,7 @@ static const struct regmap_config tpl0102_regmap_config = {
 	.channel = (ch),					\
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	.info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW),	\
 }

 static const struct iio_chan_spec tpl0102_channels[] = {
@@ -72,14 +73,32 @@ static int tpl0102_read_raw(struct iio_dev *indio_dev,
 		return ret ? ret : IIO_VAL_INT;
 	}
 	case IIO_CHAN_INFO_SCALE:
-		*val = 1000 * tpl0102_cfg[data->devid].kohms;
-		*val2 = tpl0102_cfg[data->devid].max_pos;
+		*val = 1000 * data->cfg->kohms;
+		*val2 = data->cfg->avail[2] + 1;
 		return IIO_VAL_FRACTIONAL;
 	}

 	return -EINVAL;
 }

+static int tpl0102_read_avail(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      const int **vals, int *type, int *length,
+			      long mask)
+{
+	struct tpl0102_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		*length = ARRAY_SIZE(data->cfg->avail);
+		*vals = data->cfg->avail;
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_RANGE;
+	}
+
+	return -EINVAL;
+}
+
 static int tpl0102_write_raw(struct iio_dev *indio_dev,
 			     struct iio_chan_spec const *chan,
 			     int val, int val2, long mask)
@@ -89,7 +108,7 @@ static int tpl0102_write_raw(struct iio_dev *indio_dev,
 	if (mask != IIO_CHAN_INFO_RAW)
 		return -EINVAL;

-	if (val >= tpl0102_cfg[data->devid].max_pos || val < 0)
+	if (val > data->cfg->avail[2] || val < 0)
 		return -EINVAL;

 	return regmap_write(data->regmap, chan->channel, val);
@@ -97,6 +116,7 @@ static int tpl0102_write_raw(struct iio_dev *indio_dev,

 static const struct iio_info tpl0102_info = {
 	.read_raw = tpl0102_read_raw,
+	.read_avail = tpl0102_read_avail,
 	.write_raw = tpl0102_write_raw,
 };

@@ -113,7 +133,7 @@ static int tpl0102_probe(struct i2c_client *client,
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);

-	data->devid = id->driver_data;
+	data->cfg = &tpl0102_cfg[id->driver_data];
 	data->regmap = devm_regmap_init_i2c(client, &tpl0102_regmap_config);
 	if (IS_ERR(data->regmap)) {
 		dev_err(dev, "regmap initialization failed\n");
@@ -123,7 +143,7 @@ static int tpl0102_probe(struct i2c_client *client,
 	indio_dev->dev.parent = dev;
 	indio_dev->info = &tpl0102_info;
 	indio_dev->channels = tpl0102_channels;
-	indio_dev->num_channels = tpl0102_cfg[data->devid].wipers;
+	indio_dev->num_channels = data->cfg->wipers;
 	indio_dev->name = client->name;

 	return devm_iio_device_register(dev, indio_dev);

--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -73,6 +73,7 @@ config AD7192
 config AD7280
 	tristate "Analog Devices AD7280A Lithium Ion Battery Monitoring System"
 	depends on SPI
+	select CRC8
 	help
 	  Say yes here to build support for Analog Devices AD7280A
 	  Lithium Ion Battery Monitoring System.

--- a/drivers/staging/iio/adc/ad7280a.c
+++ b/drivers/staging/iio/adc/ad7280a.c
@@ -6,6 +6,7 @@
 * Licensed under the GPL-2.
 */

+#include <linux/crc8.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -121,8 +122,6 @@ static unsigned int ad7280a_devaddr(unsigned int addr)
 * P(x) = x^8 + x^5 + x^3 + x^2 + x^1 + x^0 = 0b100101111 => 0x2F
 */
 #define POLYNOM		0x2F
-#define POLYNOM_ORDER	8
-#define HIGHBIT		(1 << (POLYNOM_ORDER - 1))

 struct ad7280_state {
 	struct spi_device		*spi;
@@ -131,7 +130,7 @@ struct ad7280_state {
 	int				slave_num;
 	int				scan_cnt;
 	int				readback_delay_us;
-	unsigned char			crc_tab[256];
+	unsigned char			crc_tab[CRC8_TABLE_SIZE];
 	unsigned char			ctrl_hb;
 	unsigned char			ctrl_lb;
 	unsigned char			cell_threshhigh;
@@ -144,23 +143,6 @@ struct ad7280_state {
 	__be32				buf[2] ____cacheline_aligned;
 };

-static void ad7280_crc8_build_table(unsigned char *crc_tab)
-{
-	unsigned char bit, crc;
-	int cnt, i;
-
-	for (cnt = 0; cnt < 256; cnt++) {
-		crc = cnt;
-		for (i = 0; i < 8; i++) {
-			bit = crc & HIGHBIT;
-			crc <<= 1;
-			if (bit)
-				crc ^= POLYNOM;
-		}
-		crc_tab[cnt] = crc;
-	}
-}
-
 static unsigned char ad7280_calc_crc8(unsigned char *crc_tab, unsigned int val)
 {
 	unsigned char crc;
@@ -256,7 +238,9 @@ static int ad7280_read(struct ad7280_state *st, unsigned int devaddr,
 	if (ret)
 		return ret;

-	__ad7280_read32(st, &tmp);
+	ret = __ad7280_read32(st, &tmp);
+	if (ret)
+		return ret;

 	if (ad7280_check_crc(st, tmp))
 		return -EIO;
@@ -294,7 +278,9 @@ static int ad7280_read_channel(struct ad7280_state *st, unsigned int devaddr,

 	ad7280_delay(st);

-	__ad7280_read32(st, &tmp);
+	ret = __ad7280_read32(st, &tmp);
+	if (ret)
+		return ret;

 	if (ad7280_check_crc(st, tmp))
 		return -EIO;
@@ -327,7 +313,9 @@ static int ad7280_read_all_channels(struct ad7280_state *st, unsigned int cnt,
 	ad7280_delay(st);

 	for (i = 0; i < cnt; i++) {
-		__ad7280_read32(st, &tmp);
+		ret = __ad7280_read32(st, &tmp);
+		if (ret)
+			return ret;

 		if (ad7280_check_crc(st, tmp))
 			return -EIO;
@@ -342,6 +330,14 @@ static int ad7280_read_all_channels(struct ad7280_state *st, unsigned int cnt,
 	return sum;
 }

+static void ad7280_sw_power_down(void *data)
+{
+	struct ad7280_state *st = data;
+
+	ad7280_write(st, AD7280A_DEVADDR_MASTER, AD7280A_CONTROL_HB, 1,
+		     AD7280A_CTRL_HB_PWRDN_SW | st->ctrl_hb);
+}
+
 static int ad7280_chain_setup(struct ad7280_state *st)
 {
 	unsigned int val, n;
@@ -362,26 +358,38 @@ static int ad7280_chain_setup(struct ad7280_state *st)
 			   AD7280A_CTRL_LB_MUST_SET |
 			   st->ctrl_lb);
 	if (ret)
-		return ret;
+		goto error_power_down;

 	ret = ad7280_write(st, AD7280A_DEVADDR_MASTER, AD7280A_READ, 1,
 			   AD7280A_CONTROL_LB << 2);
 	if (ret)
-		return ret;
+		goto error_power_down;

 	for (n = 0; n <= AD7280A_MAX_CHAIN; n++) {
-		__ad7280_read32(st, &val);
+		ret = __ad7280_read32(st, &val);
+		if (ret)
+			goto error_power_down;
+
 		if (val == 0)
 			return n - 1;

-		if (ad7280_check_crc(st, val))
-			return -EIO;
+		if (ad7280_check_crc(st, val)) {
+			ret = -EIO;
+			goto error_power_down;
+		}

-		if (n != ad7280a_devaddr(val >> 27))
-			return -EIO;
+		if (n != ad7280a_devaddr(val >> 27)) {
+			ret = -EIO;
+			goto error_power_down;
 		}
+	}
+	ret = -EFAULT;

-	return -EFAULT;
+error_power_down:
+	ad7280_write(st, AD7280A_DEVADDR_MASTER, AD7280A_CONTROL_HB, 1,
+		     AD7280A_CTRL_HB_PWRDN_SW | st->ctrl_hb);
+
+	return ret;
 }

 static ssize_t ad7280_show_balance_sw(struct device *dev,
@@ -492,7 +500,7 @@ static int ad7280_channel_init(struct ad7280_state *st)
 {
 	int dev, ch, cnt;

-	st->channels = kcalloc((st->slave_num + 1) * 12 + 2,
+	st->channels = devm_kcalloc(&st->spi->dev, (st->slave_num + 1) * 12 + 2,
 				    sizeof(*st->channels), GFP_KERNEL);
 	if (!st->channels)
 		return -ENOMEM;
@@ -552,8 +560,9 @@ static int ad7280_channel_init(struct ad7280_state *st)
 static int ad7280_attr_init(struct ad7280_state *st)
 {
 	int dev, ch, cnt;
+	unsigned int index;

-	st->iio_attr = kcalloc(2, sizeof(*st->iio_attr) *
+	st->iio_attr = devm_kcalloc(&st->spi->dev, 2, sizeof(*st->iio_attr) *
 				    (st->slave_num + 1) * AD7280A_CELLS_PER_DEV,
 				    GFP_KERNEL);
 	if (!st->iio_attr)
@@ -562,6 +571,7 @@ static int ad7280_attr_init(struct ad7280_state *st)
 	for (dev = 0, cnt = 0; dev <= st->slave_num; dev++)
 		for (ch = AD7280A_CELL_VOLTAGE_1; ch <= AD7280A_CELL_VOLTAGE_6;
 			ch++, cnt++) {
+			index = dev * AD7280A_CELLS_PER_DEV + ch;
 			st->iio_attr[cnt].address =
 				ad7280a_devaddr(dev) << 8 | ch;
 			st->iio_attr[cnt].dev_attr.attr.mode =
@@ -571,10 +581,9 @@ static int ad7280_attr_init(struct ad7280_state *st)
 			st->iio_attr[cnt].dev_attr.store =
 				ad7280_store_balance_sw;
 			st->iio_attr[cnt].dev_attr.attr.name =
-				kasprintf(GFP_KERNEL,
+				devm_kasprintf(&st->spi->dev, GFP_KERNEL,
 					       "in%d-in%d_balance_switch_en",
-					  dev * AD7280A_CELLS_PER_DEV + ch,
-					  dev * AD7280A_CELLS_PER_DEV + ch + 1);
+					       index, index + 1);
 			ad7280_attributes[cnt] =
 				&st->iio_attr[cnt].dev_attr.attr;
 			cnt++;
@@ -588,10 +597,9 @@ static int ad7280_attr_init(struct ad7280_state *st)
 			st->iio_attr[cnt].dev_attr.store =
 				ad7280_store_balance_timer;
 			st->iio_attr[cnt].dev_attr.attr.name =
-				kasprintf(GFP_KERNEL,
+				devm_kasprintf(&st->spi->dev, GFP_KERNEL,
 					       "in%d-in%d_balance_timer",
-					  dev * AD7280A_CELLS_PER_DEV + ch,
-					  dev * AD7280A_CELLS_PER_DEV + ch + 1);
+					       index, index + 1);
 			ad7280_attributes[cnt] =
 				&st->iio_attr[cnt].dev_attr.attr;
 		}
@@ -610,7 +618,7 @@ static ssize_t ad7280_read_channel_config(struct device *dev,
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	unsigned int val;

-	switch ((u32)this_attr->address) {
+	switch (this_attr->address) {
 	case AD7280A_CELL_OVERVOLTAGE:
 		val = 1000 + (st->cell_threshhigh * 1568) / 100;
 		break;
@@ -646,7 +654,7 @@ static ssize_t ad7280_write_channel_config(struct device *dev,
 	if (ret)
 		return ret;

-	switch ((u32)this_attr->address) {
+	switch (this_attr->address) {
 	case AD7280A_CELL_OVERVOLTAGE:
 	case AD7280A_CELL_UNDERVOLTAGE:
 		val = ((val - 1000) * 100) / 1568; /* LSB 15.68mV */
@@ -662,7 +670,7 @@ static ssize_t ad7280_write_channel_config(struct device *dev,
 	val = clamp(val, 0L, 0xFFL);

 	mutex_lock(&st->lock);
-	switch ((u32)this_attr->address) {
+	switch (this_attr->address) {
 	case AD7280A_CELL_OVERVOLTAGE:
 		st->cell_threshhigh = val;
 		break;
@@ -857,7 +865,7 @@ static int ad7280_probe(struct spi_device *spi)
 	if (!pdata)
 		pdata = &ad7793_default_pdata;

-	ad7280_crc8_build_table(st->crc_tab);
+	crc8_populate_msb(st->crc_tab, POLYNOM);

 	st->spi->max_speed_hz = AD7280A_MAX_SPI_CLK_HZ;
 	st->spi->mode = SPI_MODE_1;
@@ -872,6 +880,10 @@ static int ad7280_probe(struct spi_device *spi)
 	if (ret < 0)
 		return ret;

+	ret = devm_add_action_or_reset(&spi->dev, ad7280_sw_power_down, st);
+	if (ret)
+		return ret;
+
 	st->slave_num = ret;
 	st->scan_cnt = (st->slave_num + 1) * AD7280A_NUM_CH;
 	st->cell_threshhigh = 0xFF;
@@ -909,27 +921,27 @@ static int ad7280_probe(struct spi_device *spi)

 	ret = ad7280_attr_init(st);
 	if (ret < 0)
-		goto error_free_channels;
+		return ret;

-	ret = iio_device_register(indio_dev);
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
 	if (ret)
-		goto error_free_attr;
+		return ret;

 	if (spi->irq > 0) {
 		ret = ad7280_write(st, AD7280A_DEVADDR_MASTER,
 				   AD7280A_ALERT, 1,
 				   AD7280A_ALERT_RELAY_SIG_CHAIN_DOWN);
 		if (ret)
-			goto error_unregister;
+			return ret;

 		ret = ad7280_write(st, ad7280a_devaddr(st->slave_num),
 				   AD7280A_ALERT, 0,
 				   AD7280A_ALERT_GEN_STATIC_HIGH |
 				   (pdata->chain_last_alert_ignore & 0xF));
 		if (ret)
-			goto error_unregister;
+			return ret;

-		ret = request_threaded_irq(spi->irq,
+		ret = devm_request_threaded_irq(&spi->dev, spi->irq,
 						NULL,
 						ad7280_event_handler,
 						IRQF_TRIGGER_FALLING |
@@ -937,36 +949,8 @@ static int ad7280_probe(struct spi_device *spi)
 						indio_dev->name,
 						indio_dev);
 		if (ret)
-			goto error_unregister;
-	}
-
-	return 0;
-error_unregister:
-	iio_device_unregister(indio_dev);
-
-error_free_attr:
-	kfree(st->iio_attr);
-
-error_free_channels:
-	kfree(st->channels);
-
 			return ret;
-}
-
-static int ad7280_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-	struct ad7280_state *st = iio_priv(indio_dev);
-
-	if (spi->irq > 0)
-		free_irq(spi->irq, indio_dev);
-	iio_device_unregister(indio_dev);
-
-	ad7280_write(st, AD7280A_DEVADDR_MASTER, AD7280A_CONTROL_HB, 1,
-		     AD7280A_CTRL_HB_PWRDN_SW | st->ctrl_hb);
-
-	kfree(st->channels);
-	kfree(st->iio_attr);
+	}

 	return 0;
 }
@@ -982,7 +966,6 @@ static struct spi_driver ad7280_driver = {
 		.name	= "ad7280",
 	},
 	.probe		= ad7280_probe,
-	.remove		= ad7280_remove,
 	.id_table	= ad7280_id,
 };
 module_spi_driver(ad7280_driver);

--- a/drivers/staging/iio/adc/ad7606.c
+++ b/drivers/staging/iio/adc/ad7606.c
--- a/drivers/staging/iio/adc/ad7780.c
+++ b/drivers/staging/iio/adc/ad7780.c
@@ -31,10 +31,19 @@
 #define AD7780_PAT1		BIT(1)
 #define AD7780_PAT0		BIT(0)

+#define AD7780_PATTERN		(AD7780_PAT0)
+#define AD7780_PATTERN_MASK	(AD7780_PAT0 | AD7780_PAT1)
+
+#define AD7170_PAT2		BIT(2)
+
+#define AD7170_PATTERN		(AD7780_PAT0 | AD7170_PAT2)
+#define AD7170_PATTERN_MASK	(AD7780_PAT0 | AD7780_PAT1 | AD7170_PAT2)
+
 struct ad7780_chip_info {
 	struct iio_chan_spec	channel;
 	unsigned int		pattern_mask;
 	unsigned int		pattern;
+	bool			is_ad778x;
 };

 struct ad7780_state {
@@ -42,7 +51,6 @@ struct ad7780_state {
 	struct regulator		*reg;
 	struct gpio_desc		*powerdown_gpio;
 	unsigned int	gain;
-	u16				int_vref_mv;

 	struct ad_sigma_delta sd;
 };
@@ -87,16 +95,20 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
 			   long m)
 {
 	struct ad7780_state *st = iio_priv(indio_dev);
+	int voltage_uv;

 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
 		return ad_sigma_delta_single_conversion(indio_dev, chan, val);
 	case IIO_CHAN_INFO_SCALE:
-		*val = st->int_vref_mv * st->gain;
+		voltage_uv = regulator_get_voltage(st->reg);
+		if (voltage_uv < 0)
+			return voltage_uv;
+		*val = (voltage_uv / 1000) * st->gain;
 		*val2 = chan->scan_type.realbits - 1;
 		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_OFFSET:
-		*val -= (1 << (chan->scan_type.realbits - 1));
+		*val = -(1 << (chan->scan_type.realbits - 1));
 		return IIO_VAL_INT;
 	}

@@ -113,10 +125,12 @@ static int ad7780_postprocess_sample(struct ad_sigma_delta *sigma_delta,
 	    ((raw_sample & chip_info->pattern_mask) != chip_info->pattern))
 		return -EIO;

+	if (chip_info->is_ad778x) {
 		if (raw_sample & AD7780_GAIN)
 			st->gain = 1;
 		else
 			st->gain = 128;
+	}

 	return 0;
 }
@@ -133,23 +147,27 @@ static const struct ad_sigma_delta_info ad7780_sigma_delta_info = {
 static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
 	[ID_AD7170] = {
 		.channel = AD7780_CHANNEL(12, 24),
-		.pattern = 0x5,
-		.pattern_mask = 0x7,
+		.pattern = AD7170_PATTERN,
+		.pattern_mask = AD7170_PATTERN_MASK,
+		.is_ad778x = false,
 	},
 	[ID_AD7171] = {
 		.channel = AD7780_CHANNEL(16, 24),
-		.pattern = 0x5,
-		.pattern_mask = 0x7,
+		.pattern = AD7170_PATTERN,
+		.pattern_mask = AD7170_PATTERN_MASK,
+		.is_ad778x = false,
 	},
 	[ID_AD7780] = {
 		.channel = AD7780_CHANNEL(24, 32),
-		.pattern = 0x1,
-		.pattern_mask = 0x3,
+		.pattern = AD7780_PATTERN,
+		.pattern_mask = AD7780_PATTERN_MASK,
+		.is_ad778x = true,
 	},
 	[ID_AD7781] = {
 		.channel = AD7780_CHANNEL(20, 32),
-		.pattern = 0x1,
-		.pattern_mask = 0x3,
+		.pattern = AD7780_PATTERN,
+		.pattern_mask = AD7780_PATTERN_MASK,
+		.is_ad778x = true,
 	},
 };

@@ -161,7 +179,7 @@ static int ad7780_probe(struct spi_device *spi)
 {
 	struct ad7780_state *st;
 	struct iio_dev *indio_dev;
-	int ret, voltage_uv = 0;
+	int ret;

 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (!indio_dev)
@@ -181,16 +199,10 @@ static int ad7780_probe(struct spi_device *spi)
 		dev_err(&spi->dev, "Failed to enable specified AVdd supply\n");
 		return ret;
 	}
-	voltage_uv = regulator_get_voltage(st->reg);

 	st->chip_info =
 		&ad7780_chip_info_tbl[spi_get_device_id(spi)->driver_data];

-	if (voltage_uv)
-		st->int_vref_mv = voltage_uv / 1000;
-	else
-		dev_warn(&spi->dev, "Reference voltage unspecified\n");
-
 	spi_set_drvdata(spi, indio_dev);

 	indio_dev->dev.parent = &spi->dev;

--- a/drivers/staging/iio/adc/ad7816.c
+++ b/drivers/staging/iio/adc/ad7816.c
@@ -7,7 +7,7 @@
 */

 #include <linux/interrupt.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -43,15 +43,22 @@
 */

 struct ad7816_chip_info {
+	kernel_ulong_t id;
 	struct spi_device *spi_dev;
-	u16 rdwr_pin;
-	u16 convert_pin;
-	u16 busy_pin;
+	struct gpio_desc *rdwr_pin;
+	struct gpio_desc *convert_pin;
+	struct gpio_desc *busy_pin;
 	u8  oti_data[AD7816_CS_MAX + 1];
 	u8  channel_id;	/* 0 always be temperature */
 	u8  mode;
 };

+enum ad7816_type {
+	ID_AD7816,
+	ID_AD7817,
+	ID_AD7818,
+};
+
 /*
 * ad7816 data access by SPI
 */
@@ -61,28 +68,30 @@ static int ad7816_spi_read(struct ad7816_chip_info *chip, u16 *data)
 	int ret = 0;
 	__be16 buf;

-	gpio_set_value(chip->rdwr_pin, 1);
-	gpio_set_value(chip->rdwr_pin, 0);
+	gpiod_set_value(chip->rdwr_pin, 1);
+	gpiod_set_value(chip->rdwr_pin, 0);
 	ret = spi_write(spi_dev, &chip->channel_id, sizeof(chip->channel_id));
 	if (ret < 0) {
 		dev_err(&spi_dev->dev, "SPI channel setting error\n");
 		return ret;
 	}
-	gpio_set_value(chip->rdwr_pin, 1);
+	gpiod_set_value(chip->rdwr_pin, 1);

 	if (chip->mode == AD7816_PD) { /* operating mode 2 */
-		gpio_set_value(chip->convert_pin, 1);
-		gpio_set_value(chip->convert_pin, 0);
+		gpiod_set_value(chip->convert_pin, 1);
+		gpiod_set_value(chip->convert_pin, 0);
 	} else { /* operating mode 1 */
-		gpio_set_value(chip->convert_pin, 0);
-		gpio_set_value(chip->convert_pin, 1);
+		gpiod_set_value(chip->convert_pin, 0);
+		gpiod_set_value(chip->convert_pin, 1);
 	}

-	while (gpio_get_value(chip->busy_pin))
+	if (chip->id == ID_AD7816 || chip->id == ID_AD7817) {
+		while (gpiod_get_value(chip->busy_pin))
 			cpu_relax();
+	}

-	gpio_set_value(chip->rdwr_pin, 0);
-	gpio_set_value(chip->rdwr_pin, 1);
+	gpiod_set_value(chip->rdwr_pin, 0);
+	gpiod_set_value(chip->rdwr_pin, 1);
 	ret = spi_read(spi_dev, &buf, sizeof(*data));
 	if (ret < 0) {
 		dev_err(&spi_dev->dev, "SPI data read error\n");
@@ -99,8 +108,8 @@ static int ad7816_spi_write(struct ad7816_chip_info *chip, u8 data)
 	struct spi_device *spi_dev = chip->spi_dev;
 	int ret = 0;

-	gpio_set_value(chip->rdwr_pin, 1);
-	gpio_set_value(chip->rdwr_pin, 0);
+	gpiod_set_value(chip->rdwr_pin, 1);
+	gpiod_set_value(chip->rdwr_pin, 0);
 	ret = spi_write(spi_dev, &data, sizeof(data));
 	if (ret < 0)
 		dev_err(&spi_dev->dev, "SPI oti data write error\n");
@@ -129,10 +138,10 @@ static ssize_t ad7816_store_mode(struct device *dev,
 	struct ad7816_chip_info *chip = iio_priv(indio_dev);

 	if (strcmp(buf, "full")) {
-		gpio_set_value(chip->rdwr_pin, 1);
+		gpiod_set_value(chip->rdwr_pin, 1);
 		chip->mode = AD7816_FULL;
 	} else {
-		gpio_set_value(chip->rdwr_pin, 0);
+		gpiod_set_value(chip->rdwr_pin, 0);
 		chip->mode = AD7816_PD;
 	}

@@ -345,15 +354,9 @@ static int ad7816_probe(struct spi_device *spi_dev)
 {
 	struct ad7816_chip_info *chip;
 	struct iio_dev *indio_dev;
-	unsigned short *pins = dev_get_platdata(&spi_dev->dev);
 	int ret = 0;
 	int i;

-	if (!pins) {
-		dev_err(&spi_dev->dev, "No necessary GPIO platform data.\n");
-		return -EINVAL;
-	}
-
 	indio_dev = devm_iio_device_alloc(&spi_dev->dev, sizeof(*chip));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -364,34 +367,33 @@ static int ad7816_probe(struct spi_device *spi_dev)
 	chip->spi_dev = spi_dev;
 	for (i = 0; i <= AD7816_CS_MAX; i++)
 		chip->oti_data[i] = 203;
-	chip->rdwr_pin = pins[0];
-	chip->convert_pin = pins[1];
-	chip->busy_pin = pins[2];
-
-	ret = devm_gpio_request(&spi_dev->dev, chip->rdwr_pin,
-				spi_get_device_id(spi_dev)->name);
-	if (ret) {
-		dev_err(&spi_dev->dev, "Fail to request rdwr gpio PIN %d.\n",
-			chip->rdwr_pin);
+
+	chip->id = spi_get_device_id(spi_dev)->driver_data;
+	chip->rdwr_pin = devm_gpiod_get(&spi_dev->dev, "rdwr", GPIOD_OUT_HIGH);
+	if (IS_ERR(chip->rdwr_pin)) {
+		ret = PTR_ERR(chip->rdwr_pin);
+		dev_err(&spi_dev->dev, "Failed to request rdwr GPIO: %d\n",
+			ret);
 		return ret;
 	}
-	gpio_direction_input(chip->rdwr_pin);
-	ret = devm_gpio_request(&spi_dev->dev, chip->convert_pin,
-				spi_get_device_id(spi_dev)->name);
-	if (ret) {
-		dev_err(&spi_dev->dev, "Fail to request convert gpio PIN %d.\n",
-			chip->convert_pin);
+	chip->convert_pin = devm_gpiod_get(&spi_dev->dev, "convert",
+					   GPIOD_OUT_HIGH);
+	if (IS_ERR(chip->convert_pin)) {
+		ret = PTR_ERR(chip->convert_pin);
+		dev_err(&spi_dev->dev, "Failed to request convert GPIO: %d\n",
+			ret);
 		return ret;
 	}
-	gpio_direction_input(chip->convert_pin);
-	ret = devm_gpio_request(&spi_dev->dev, chip->busy_pin,
-				spi_get_device_id(spi_dev)->name);
-	if (ret) {
-		dev_err(&spi_dev->dev, "Fail to request busy gpio PIN %d.\n",
-			chip->busy_pin);
+	if (chip->id == ID_AD7816 || chip->id == ID_AD7817) {
+		chip->busy_pin = devm_gpiod_get(&spi_dev->dev, "busy",
+						GPIOD_IN);
+		if (IS_ERR(chip->busy_pin)) {
+			ret = PTR_ERR(chip->busy_pin);
+			dev_err(&spi_dev->dev, "Failed to request busy GPIO: %d\n",
+				ret);
 			return ret;
 		}
-	gpio_direction_input(chip->busy_pin);
+	}

 	indio_dev->name = spi_get_device_id(spi_dev)->name;
 	indio_dev->dev.parent = &spi_dev->dev;
@@ -420,10 +422,18 @@ static int ad7816_probe(struct spi_device *spi_dev)
 	return 0;
 }

+static const struct of_device_id ad7816_of_match[] = {
+	{ .compatible = "adi,ad7816", },
+	{ .compatible = "adi,ad7817", },
+	{ .compatible = "adi,ad7818", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad7816_of_match);
+
 static const struct spi_device_id ad7816_id[] = {
-	{ "ad7816", 0 },
-	{ "ad7817", 0 },
-	{ "ad7818", 0 },
+	{ "ad7816", ID_AD7816 },
+	{ "ad7817", ID_AD7817 },
+	{ "ad7818", ID_AD7818 },
 	{}
 };

@@ -432,6 +442,7 @@ MODULE_DEVICE_TABLE(spi, ad7816_id);
 static struct spi_driver ad7816_driver = {
 	.driver = {
 		.name = "ad7816",
+		.of_match_table = ad7816_of_match,
 	},
 	.probe = ad7816_probe,
 	.id_table = ad7816_id,

--- a/drivers/staging/iio/addac/adt7316-i2c.c
+++ b/drivers/staging/iio/addac/adt7316-i2c.c
@@ -30,11 +30,17 @@ static int adt7316_i2c_read(void *client, u8 reg, u8 *data)
 	}

 	ret = i2c_smbus_read_byte(client);
+
+	if (!ret)
+		return -EIO;
+
 	if (ret < 0) {
 		dev_err(&cl->dev, "I2C read error\n");
 		return ret;
 	}

+	*data = ret;
+
 	return 0;
 }


--- a/drivers/staging/iio/addac/adt7316.c
+++ b/drivers/staging/iio/addac/adt7316.c
@@ -1277,7 +1277,9 @@ static ssize_t adt7316_show_temp_offset(struct adt7316_chip_info *chip,
 }

 static ssize_t adt7316_store_temp_offset(struct adt7316_chip_info *chip,
-		int offset_addr, const char *buf, size_t len)
+					 int offset_addr,
+					 const char *buf,
+					 size_t len)
 {
 	int data;
 	u8 val;

--- a/drivers/staging/iio/addac/adt7316.h
+++ b/drivers/staging/iio/addac/adt7316.h
--- a/drivers/staging/iio/cdc/ad7150.c
+++ b/drivers/staging/iio/cdc/ad7150.c
@@ -102,18 +102,19 @@ static int ad7150_read_raw(struct iio_dev *indio_dev,
 {
 	int ret;
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
+	int channel = chan->channel;

 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		ret = i2c_smbus_read_word_data(chip->client,
-					ad7150_addresses[chan->channel][0]);
+					       ad7150_addresses[channel][0]);
 		if (ret < 0)
 			return ret;
 		*val = swab16(ret);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_AVERAGE_RAW:
 		ret = i2c_smbus_read_word_data(chip->client,
-					ad7150_addresses[chan->channel][1]);
+					       ad7150_addresses[channel][1]);
 		if (ret < 0)
 			return ret;
 		*val = swab16(ret);

--- a/drivers/staging/iio/impedance-analyzer/ad5933.c
+++ b/drivers/staging/iio/impedance-analyzer/ad5933.c
@@ -84,13 +84,13 @@

 /**
 * struct ad5933_platform_data - platform specific data
- * @ext_clk_Hz:		the external clock frequency in Hz, if not set
+ * @ext_clk_hz:		the external clock frequency in Hz, if not set
 *			the driver uses the internal clock (16.776 MHz)
 * @vref_mv:		the external reference voltage in millivolt
 */

 struct ad5933_platform_data {
-	unsigned long			ext_clk_Hz;
+	unsigned long			ext_clk_hz;
 	unsigned short			vref_mv;
 };

@@ -210,7 +210,7 @@ static int ad5933_set_freq(struct ad5933_state *st,
 		u8 d8[4];
 	} dat;

-	freqreg = (u64) freq * (u64) (1 << 27);
+	freqreg = (u64)freq * (u64)(1 << 27);
 	do_div(freqreg, st->mclk_hz / 4);

 	switch (reg) {
@@ -267,7 +267,6 @@ static void ad5933_calc_out_ranges(struct ad5933_state *st)

 	for (i = 0; i < 4; i++)
 		st->range_avail[i] = normalized_3v3[i] * st->vref_mv / 3300;
-
 }

 /*
@@ -726,8 +725,8 @@ static int ad5933_probe(struct i2c_client *client,
 	else
 		st->vref_mv = pdata->vref_mv;

-	if (pdata->ext_clk_Hz) {
-		st->mclk_hz = pdata->ext_clk_Hz;
+	if (pdata->ext_clk_hz) {
+		st->mclk_hz = pdata->ext_clk_hz;
 		st->ctrl_lb = AD5933_CTRL_EXT_SYSCLK;
 	} else {
 		st->mclk_hz = AD5933_INT_OSC_FREQ_Hz;

--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -15,12 +15,11 @@
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>

 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
-#include "ad2s1210.h"

 #define DRV_NAME "ad2s1210"

@@ -67,12 +66,33 @@ enum ad2s1210_mode {
 	MOD_RESERVED,
 };

+enum ad2s1210_gpios {
+	AD2S1210_SAMPLE,
+	AD2S1210_A0,
+	AD2S1210_A1,
+	AD2S1210_RES0,
+	AD2S1210_RES1,
+};
+
+struct ad2s1210_gpio {
+	const char *name;
+	unsigned long flags;
+};
+
+static const struct ad2s1210_gpio gpios[] = {
+	[AD2S1210_SAMPLE] = { .name = "adi,sample", .flags = GPIOD_OUT_LOW },
+	[AD2S1210_A0] = { .name = "adi,a0", .flags = GPIOD_OUT_LOW },
+	[AD2S1210_A1] = { .name = "adi,a1", .flags = GPIOD_OUT_LOW },
+	[AD2S1210_RES0] = { .name = "adi,res0", .flags = GPIOD_OUT_LOW },
+	[AD2S1210_RES1] = { .name = "adi,res1", .flags = GPIOD_OUT_LOW },
+};
+
 static const unsigned int ad2s1210_resolution_value[] = { 10, 12, 14, 16 };

 struct ad2s1210_state {
-	const struct ad2s1210_platform_data *pdata;
 	struct mutex lock;
 	struct spi_device *sdev;
+	struct gpio_desc *gpios[5];
 	unsigned int fclkin;
 	unsigned int fexcit;
 	bool hysteresis;
@@ -91,8 +111,8 @@ static const int ad2s1210_mode_vals[4][2] = {
 static inline void ad2s1210_set_mode(enum ad2s1210_mode mode,
 				     struct ad2s1210_state *st)
 {
-	gpio_set_value(st->pdata->a[0], ad2s1210_mode_vals[mode][0]);
-	gpio_set_value(st->pdata->a[1], ad2s1210_mode_vals[mode][1]);
+	gpiod_set_value(st->gpios[AD2S1210_A0], ad2s1210_mode_vals[mode][0]);
+	gpiod_set_value(st->gpios[AD2S1210_A1], ad2s1210_mode_vals[mode][1]);
 	st->mode = mode;
 }

@@ -150,23 +170,15 @@ int ad2s1210_update_frequency_control_word(struct ad2s1210_state *st)
 	return ad2s1210_config_write(st, fcw);
 }

-static unsigned char ad2s1210_read_resolution_pin(struct ad2s1210_state *st)
-{
-	int resolution = (gpio_get_value(st->pdata->res[0]) << 1) |
-			  gpio_get_value(st->pdata->res[1]);
-
-	return ad2s1210_resolution_value[resolution];
-}
-
 static const int ad2s1210_res_pins[4][2] = {
 	{ 0, 0 }, {0, 1}, {1, 0}, {1, 1}
 };

 static inline void ad2s1210_set_resolution_pin(struct ad2s1210_state *st)
 {
-	gpio_set_value(st->pdata->res[0],
+	gpiod_set_value(st->gpios[AD2S1210_RES0],
 			ad2s1210_res_pins[(st->resolution - 10) / 2][0]);
-	gpio_set_value(st->pdata->res[1],
+	gpiod_set_value(st->gpios[AD2S1210_RES1],
 			ad2s1210_res_pins[(st->resolution - 10) / 2][1]);
 }

@@ -301,15 +313,9 @@ static ssize_t ad2s1210_store_control(struct device *dev,
 			"ad2s1210: write control register fail\n");
 		goto error_ret;
 	}
-	st->resolution
-		= ad2s1210_resolution_value[data & AD2S1210_SET_RESOLUTION];
-	if (st->pdata->gpioin) {
-		data = ad2s1210_read_resolution_pin(st);
-		if (data != st->resolution)
-			dev_warn(dev, "ad2s1210: resolution settings not match\n");
-	} else {
+	st->resolution =
+		ad2s1210_resolution_value[data & AD2S1210_SET_RESOLUTION];
 	ad2s1210_set_resolution_pin(st);
-	}
 	ret = len;
 	st->hysteresis = !!(data & AD2S1210_ENABLE_HYSTERESIS);

@@ -363,15 +369,9 @@ static ssize_t ad2s1210_store_resolution(struct device *dev,
 		dev_err(dev, "ad2s1210: setting resolution fail\n");
 		goto error_ret;
 	}
-	st->resolution
-		= ad2s1210_resolution_value[data & AD2S1210_SET_RESOLUTION];
-	if (st->pdata->gpioin) {
-		data = ad2s1210_read_resolution_pin(st);
-		if (data != st->resolution)
-			dev_warn(dev, "ad2s1210: resolution settings not match\n");
-	} else {
+	st->resolution =
+		ad2s1210_resolution_value[data & AD2S1210_SET_RESOLUTION];
 	ad2s1210_set_resolution_pin(st);
-	}
 	ret = len;
 error_ret:
 	mutex_unlock(&st->lock);
@@ -401,15 +401,15 @@ static ssize_t ad2s1210_clear_fault(struct device *dev,
 	int ret;

 	mutex_lock(&st->lock);
-	gpio_set_value(st->pdata->sample, 0);
+	gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 0);
 	/* delay (2 * tck + 20) nano seconds */
 	udelay(1);
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 1);
 	ret = ad2s1210_config_read(st, AD2S1210_REG_FAULT);
 	if (ret < 0)
 		goto error_ret;
-	gpio_set_value(st->pdata->sample, 0);
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 0);
+	gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 1);
 error_ret:
 	mutex_unlock(&st->lock);

@@ -466,7 +466,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
 	s16 vel;

 	mutex_lock(&st->lock);
-	gpio_set_value(st->pdata->sample, 0);
+	gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 0);
 	/* delay (6 * tck + 20) nano seconds */
 	udelay(1);

@@ -512,7 +512,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
 	}

 error_ret:
-	gpio_set_value(st->pdata->sample, 1);
+	gpiod_set_value(st->gpios[AD2S1210_SAMPLE], 1);
 	/* delay (2 * tck + 20) nano seconds */
 	udelay(1);
 	mutex_unlock(&st->lock);
@@ -592,9 +592,6 @@ static int ad2s1210_initial(struct ad2s1210_state *st)
 	int ret;

 	mutex_lock(&st->lock);
-	if (st->pdata->gpioin)
-		st->resolution = ad2s1210_read_resolution_pin(st);
-	else
 	ad2s1210_set_resolution_pin(st);

 	ret = ad2s1210_config_write(st, AD2S1210_REG_CONTROL);
@@ -630,30 +627,22 @@ static const struct iio_info ad2s1210_info = {

 static int ad2s1210_setup_gpios(struct ad2s1210_state *st)
 {
-	unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
-	struct gpio ad2s1210_gpios[] = {
-		{ st->pdata->sample, GPIOF_DIR_IN, "sample" },
-		{ st->pdata->a[0], flags, "a0" },
-		{ st->pdata->a[1], flags, "a1" },
-		{ st->pdata->res[0], flags, "res0" },
-		{ st->pdata->res[0], flags, "res1" },
-	};
-
-	return gpio_request_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
-}
-
-static void ad2s1210_free_gpios(struct ad2s1210_state *st)
-{
-	unsigned long flags = st->pdata->gpioin ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
-	struct gpio ad2s1210_gpios[] = {
-		{ st->pdata->sample, GPIOF_DIR_IN, "sample" },
-		{ st->pdata->a[0], flags, "a0" },
-		{ st->pdata->a[1], flags, "a1" },
-		{ st->pdata->res[0], flags, "res0" },
-		{ st->pdata->res[0], flags, "res1" },
-	};
+	struct spi_device *spi = st->sdev;
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		st->gpios[i] = devm_gpiod_get(&spi->dev, gpios[i].name,
+					      gpios[i].flags);
+		if (IS_ERR(st->gpios[i])) {
+			ret = PTR_ERR(st->gpios[i]);
+			dev_err(&spi->dev,
+				"ad2s1210: failed to request %s GPIO: %d\n",
+				gpios[i].name, ret);
+			return ret;
+		}
+	}

-	gpio_free_array(ad2s1210_gpios, ARRAY_SIZE(ad2s1210_gpios));
+	return 0;
 }

 static int ad2s1210_probe(struct spi_device *spi)
@@ -669,7 +658,6 @@ static int ad2s1210_probe(struct spi_device *spi)
 	if (!indio_dev)
 		return -ENOMEM;
 	st = iio_priv(indio_dev);
-	st->pdata = spi->dev.platform_data;
 	ret = ad2s1210_setup_gpios(st);
 	if (ret < 0)
 		return ret;
@@ -692,7 +680,7 @@ static int ad2s1210_probe(struct spi_device *spi)

 	ret = iio_device_register(indio_dev);
 	if (ret)
-		goto error_free_gpios;
+		return ret;

 	st->fclkin = spi->max_speed_hz;
 	spi->mode = SPI_MODE_3;
@@ -700,10 +688,6 @@ static int ad2s1210_probe(struct spi_device *spi)
 	ad2s1210_initial(st);

 	return 0;
-
-error_free_gpios:
-	ad2s1210_free_gpios(st);
-	return ret;
 }

 static int ad2s1210_remove(struct spi_device *spi)
@@ -711,11 +695,16 @@ static int ad2s1210_remove(struct spi_device *spi)
 	struct iio_dev *indio_dev = spi_get_drvdata(spi);

 	iio_device_unregister(indio_dev);
-	ad2s1210_free_gpios(iio_priv(indio_dev));

 	return 0;
 }

+static const struct of_device_id ad2s1210_of_match[] = {
+	{ .compatible = "adi,ad2s1210", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad2s1210_of_match);
+
 static const struct spi_device_id ad2s1210_id[] = {
 	{ "ad2s1210" },
 	{}
@@ -725,6 +714,7 @@ MODULE_DEVICE_TABLE(spi, ad2s1210_id);
 static struct spi_driver ad2s1210_driver = {
 	.driver = {
 		.name = DRV_NAME,
+		.of_match_table = of_match_ptr(ad2s1210_of_match),
 	},
 	.probe = ad2s1210_probe,
 	.remove = ad2s1210_remove,

--- a/drivers/staging/iio/resolver/ad2s1210.h
+++ b/drivers/staging/iio/resolver/ad2s1210.h
-/*
- * ad2s1210.h plaform data for the ADI Resolver to Digital Converters:
- * AD2S1210
- *
- * Copyright (c) 2010-2010 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _AD2S1210_H
-#define _AD2S1210_H
-
-struct ad2s1210_platform_data {
-	unsigned int		sample;
-	unsigned int		a[2];
-	unsigned int		res[2];
-	bool			gpioin;
-};
-#endif /* _AD2S1210_H */
--- a/drivers/staging/iio/resolver/ad2s90.c
+++ b/drivers/staging/iio/resolver/ad2s90.c
@@ -34,16 +34,32 @@ static int ad2s90_read_raw(struct iio_dev *indio_dev,
 	int ret;
 	struct ad2s90_state *st = iio_priv(indio_dev);

+	if (chan->type != IIO_ANGL)
+		return -EINVAL;
+
+	switch (m) {
+	case IIO_CHAN_INFO_SCALE:
+		/* 2 * Pi / 2^12 */
+		*val = 6283; /* mV */
+		*val2 = 12;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_RAW:
 		mutex_lock(&st->lock);
 		ret = spi_read(st->sdev, st->rx, 2);
-	if (ret)
-		goto error_ret;
+		if (ret < 0) {
+			mutex_unlock(&st->lock);
+			return ret;
+		}
 		*val = (((u16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);

-error_ret:
 		mutex_unlock(&st->lock);

 		return IIO_VAL_INT;
+	default:
+		break;
+	}
+
+	return -EINVAL;
 }

 static const struct iio_info ad2s90_info = {
@@ -54,14 +70,14 @@ static const struct iio_chan_spec ad2s90_chan = {
 	.type = IIO_ANGL,
 	.indexed = 1,
 	.channel = 0,
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
 };

 static int ad2s90_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
 	struct ad2s90_state *st;
-	int ret = 0;
+	int ret;

 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (!indio_dev)
@@ -78,16 +94,17 @@ static int ad2s90_probe(struct spi_device *spi)
 	indio_dev->num_channels = 1;
 	indio_dev->name = spi_get_device_id(spi)->name;

-	ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
-	if (ret)
-		return ret;
-
 	/* need 600ns between CS and the first falling edge of SCLK */
 	spi->max_speed_hz = 830000;
 	spi->mode = SPI_MODE_3;
-	spi_setup(spi);
+	ret = spi_setup(spi);
+
+	if (ret < 0) {
+		dev_err(&spi->dev, "spi_setup failed!\n");
+		return ret;
+	}

-	return 0;
+	return devm_iio_device_register(indio_dev->dev.parent, indio_dev);
 }

 static const struct spi_device_id ad2s90_id[] = {

--- a/include/linux/iio/adc/ad_sigma_delta.h
+++ b/include/linux/iio/adc/ad_sigma_delta.h
@@ -39,6 +39,8 @@ struct iio_dev;
 *		if there is just one read-only sample data shift register.
 * @addr_shift: Shift of the register address in the communications register.
 * @read_mask: Mask for the communications register having the read bit set.
+ * @data_reg: Address of the data register, if 0 the default address of 0x3 will
+ *   be used.
 */
 struct ad_sigma_delta_info {
 	int (*set_channel)(struct ad_sigma_delta *, unsigned int channel);
@@ -47,6 +49,7 @@ struct ad_sigma_delta_info {
 	bool has_registers;
 	unsigned int addr_shift;
 	unsigned int read_mask;
+	unsigned int data_reg;
 };

 /**

--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -40,7 +40,7 @@
 #define ST_SENSORS_DEFAULT_STAT_ADDR		0x27

 #define ST_SENSORS_MAX_NAME			17
-#define ST_SENSORS_MAX_4WAI			7
+#define ST_SENSORS_MAX_4WAI			8

 #define ST_SENSORS_LSM_CHANNELS(device_type, mask, index, mod, \
 					ch2, s, endian, rbits, sbits, addr) \

--- a/include/linux/platform_data/st_sensors_pdata.h
+++ b/include/linux/platform_data/st_sensors_pdata.h
@@ -18,11 +18,13 @@
 *	Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet).
 * @open_drain: set the interrupt line to be open drain if possible.
 * @spi_3wire: enable spi-3wire mode.
+ * @pullups: enable/disable i2c controller pullup resistors.
 */
 struct st_sensors_platform_data {
 	u8 drdy_int_pin;
 	bool open_drain;
 	bool spi_3wire;
+	bool pullups;
 };

 #endif /* ST_SENSORS_PDATA_H */
--- a/tools/iio/Makefile
+++ b/tools/iio/Makefile
@@ -12,7 +12,7 @@ endif
 # (this improves performance and avoids hard-to-debug behaviour);
 MAKEFLAGS += -r

-CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
+override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include

 ALL_TARGETS := iio_event_monitor lsiio iio_generic_buffer
 ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS))