Commit 7c4be5aa authored by Alan Cox's avatar Alan Cox Committed by Wim Van Sebroeck

[WATCHDOG 57/57] wdt501/pci: Clean up, coding style and switch to unlocked_ioctl

Review and switch to unlocked_ioctl
Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
parent f2b79c6e
......@@ -24,9 +24,10 @@
* Matt Crocker).
* Alan Cox : Added wdt= boot option
* Alan Cox : Cleaned up copy/user stuff
* Tim Hockin : Added insmod parameters, comment cleanup
* Parameterized timeout
* Tigran Aivazian : Restructured wdt_init() to handle failures
* Tim Hockin : Added insmod parameters, comment
* cleanup, parameterized timeout
* Tigran Aivazian : Restructured wdt_init() to handle
* failures
* Joel Becker : Added WDIOC_GET/SETTIMEOUT
* Matt Domsch : Added nowayout module option
*/
......@@ -42,9 +43,9 @@
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include "wd501p.h"
......@@ -60,15 +61,19 @@ static char expect_close;
static int heartbeat = WD_TIMO;
static int wd_heartbeat;
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" __MODULE_STRING(WD_TIMO) ")");
MODULE_PARM_DESC(heartbeat,
"Watchdog heartbeat in seconds. (0 < heartbeat < 65536, default="
__MODULE_STRING(WD_TIMO) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
/* You must set these - there is no sane way to probe for this board. */
static int io=0x240;
static int irq=11;
static int io = 0x240;
static int irq = 11;
static DEFINE_SPINLOCK(wdt_lock);
......@@ -82,7 +87,8 @@ MODULE_PARM_DESC(irq, "WDT irq (default=11)");
static int tachometer;
module_param(tachometer, int, 0);
MODULE_PARM_DESC(tachometer, "WDT501-P Fan Tachometer support (0=disable, default=0)");
MODULE_PARM_DESC(tachometer,
"WDT501-P Fan Tachometer support (0=disable, default=0)");
#endif /* CONFIG_WDT_501 */
/*
......@@ -91,9 +97,9 @@ MODULE_PARM_DESC(tachometer, "WDT501-P Fan Tachometer support (0=disable, defaul
static void wdt_ctr_mode(int ctr, int mode)
{
ctr<<=6;
ctr|=0x30;
ctr|=(mode<<1);
ctr <<= 6;
ctr |= 0x30;
ctr |= (mode << 1);
outb_p(ctr, WDT_CR);
}
......@@ -114,12 +120,15 @@ static int wdt_start(void)
unsigned long flags;
spin_lock_irqsave(&wdt_lock, flags);
inb_p(WDT_DC); /* Disable watchdog */
wdt_ctr_mode(0,3); /* Program CTR0 for Mode 3: Square Wave Generator */
wdt_ctr_mode(1,2); /* Program CTR1 for Mode 2: Rate Generator */
wdt_ctr_mode(2,0); /* Program CTR2 for Mode 0: Pulse on Terminal Count */
wdt_ctr_mode(0, 3); /* Program CTR0 for Mode 3:
Square Wave Generator */
wdt_ctr_mode(1, 2); /* Program CTR1 for Mode 2:
Rate Generator */
wdt_ctr_mode(2, 0); /* Program CTR2 for Mode 0:
Pulse on Terminal Count */
wdt_ctr_load(0, 8948); /* Count at 100Hz */
wdt_ctr_load(1,wd_heartbeat); /* Heartbeat */
wdt_ctr_load(2,65535); /* Length of reset pulse */
wdt_ctr_load(1, wd_heartbeat); /* Heartbeat */
wdt_ctr_load(2, 65535); /* Length of reset pulse */
outb_p(0, WDT_DC); /* Enable watchdog */
spin_unlock_irqrestore(&wdt_lock, flags);
return 0;
......@@ -131,13 +140,13 @@ static int wdt_start(void)
* Stop the watchdog driver.
*/
static int wdt_stop (void)
static int wdt_stop(void)
{
unsigned long flags;
spin_lock_irqsave(&wdt_lock, flags);
/* Turn the card off */
inb_p(WDT_DC); /* Disable watchdog */
wdt_ctr_load(2,0); /* 0 length reset pulses now */
wdt_ctr_load(2, 0); /* 0 length reset pulses now */
spin_unlock_irqrestore(&wdt_lock, flags);
return 0;
}
......@@ -145,8 +154,8 @@ static int wdt_stop (void)
/**
* wdt_ping:
*
* Reload counter one with the watchdog heartbeat. We don't bother reloading
* the cascade counter.
* Reload counter one with the watchdog heartbeat. We don't bother
* reloading the cascade counter.
*/
static int wdt_ping(void)
......@@ -155,8 +164,9 @@ static int wdt_ping(void)
spin_lock_irqsave(&wdt_lock, flags);
/* Write a watchdog value */
inb_p(WDT_DC); /* Disable watchdog */
wdt_ctr_mode(1,2); /* Re-Program CTR1 for Mode 2: Rate Generator */
wdt_ctr_load(1,wd_heartbeat); /* Heartbeat */
wdt_ctr_mode(1, 2); /* Re-Program CTR1 for Mode 2:
Rate Generator */
wdt_ctr_load(1, wd_heartbeat); /* Heartbeat */
outb_p(0, WDT_DC); /* Enable watchdog */
spin_unlock_irqrestore(&wdt_lock, flags);
return 0;
......@@ -166,13 +176,14 @@ static int wdt_ping(void)
* wdt_set_heartbeat:
* @t: the new heartbeat value that needs to be set.
*
* Set a new heartbeat value for the watchdog device. If the heartbeat value is
* incorrect we keep the old value and return -EINVAL. If successfull we
* return 0.
* Set a new heartbeat value for the watchdog device. If the heartbeat
* value is incorrect we keep the old value and return -EINVAL. If
* successful we return 0.
*/
static int wdt_set_heartbeat(int t)
{
if ((t < 1) || (t > 65535))
if (t < 1 || t > 65535)
return -EINVAL;
heartbeat = t;
......@@ -200,7 +211,7 @@ static int wdt_get_status(int *status)
new_status = inb_p(WDT_SR);
spin_unlock_irqrestore(&wdt_lock, flags);
*status=0;
*status = 0;
if (new_status & WDC_SR_ISOI0)
*status |= WDIOF_EXTERN1;
if (new_status & WDC_SR_ISII1)
......@@ -266,7 +277,7 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id)
#ifdef CONFIG_WDT_501
if (!(status & WDC_SR_TGOOD))
printk(KERN_CRIT "Overheat alarm.(%d)\n",inb_p(WDT_RT));
printk(KERN_CRIT "Overheat alarm.(%d)\n", inb_p(WDT_RT));
if (!(status & WDC_SR_PSUOVER))
printk(KERN_CRIT "PSU over voltage.\n");
if (!(status & WDC_SR_PSUUNDR))
......@@ -304,9 +315,10 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id)
* write of data will do, as we we don't define content meaning.
*/
static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
static ssize_t wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
if(count) {
if (count) {
if (!nowayout) {
size_t i;
......@@ -328,7 +340,6 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count
/**
* wdt_ioctl:
* @inode: inode of the device
* @file: file handle to the device
* @cmd: watchdog command
* @arg: argument pointer
......@@ -338,8 +349,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count
* querying capabilities and current status.
*/
static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
unsigned long arg)
static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
int __user *p = argp;
......@@ -362,13 +372,11 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
ident.options |= WDIOF_FANFAULT;
#endif /* CONFIG_WDT_501 */
switch(cmd)
{
switch (cmd) {
default:
return -ENOTTY;
case WDIOC_GETSUPPORT:
return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
wdt_get_status(&status);
return put_user(status, p);
......@@ -380,10 +388,8 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
case WDIOC_SETTIMEOUT:
if (get_user(new_heartbeat, p))
return -EFAULT;
if (wdt_set_heartbeat(new_heartbeat))
return -EINVAL;
wdt_ping();
/* Fall */
case WDIOC_GETTIMEOUT:
......@@ -405,7 +411,7 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
static int wdt_open(struct inode *inode, struct file *file)
{
if(test_and_set_bit(0, &wdt_is_open))
if (test_and_set_bit(0, &wdt_is_open))
return -EBUSY;
/*
* Activate
......@@ -432,7 +438,8 @@ static int wdt_release(struct inode *inode, struct file *file)
wdt_stop();
clear_bit(0, &wdt_is_open);
} else {
printk(KERN_CRIT "wdt: WDT device closed unexpectedly. WDT will not stop!\n");
printk(KERN_CRIT
"wdt: WDT device closed unexpectedly. WDT will not stop!\n");
wdt_ping();
}
expect_close = 0;
......@@ -451,14 +458,15 @@ static int wdt_release(struct inode *inode, struct file *file)
* farenheit. It was designed by an imperial measurement luddite.
*/
static ssize_t wdt_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr)
static ssize_t wdt_temp_read(struct file *file, char __user *buf,
size_t count, loff_t *ptr)
{
int temperature;
if (wdt_get_temperature(&temperature))
return -EFAULT;
if (copy_to_user (buf, &temperature, 1))
if (copy_to_user(buf, &temperature, 1))
return -EFAULT;
return 1;
......@@ -506,10 +514,8 @@ static int wdt_temp_release(struct inode *inode, struct file *file)
static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
if(code==SYS_DOWN || code==SYS_HALT) {
/* Turn the card off */
if (code == SYS_DOWN || code == SYS_HALT)
wdt_stop();
}
return NOTIFY_DONE;
}
......@@ -522,7 +528,7 @@ static const struct file_operations wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = wdt_write,
.ioctl = wdt_ioctl,
.unlocked_ioctl = wdt_ioctl,
.open = wdt_open,
.release = wdt_release,
};
......@@ -576,7 +582,7 @@ static void __exit wdt_exit(void)
#endif /* CONFIG_WDT_501 */
unregister_reboot_notifier(&wdt_notifier);
free_irq(irq, NULL);
release_region(io,8);
release_region(io, 8);
}
/**
......@@ -591,35 +597,39 @@ static int __init wdt_init(void)
{
int ret;
/* Check that the heartbeat value is within it's range ; if not reset to the default */
/* Check that the heartbeat value is within it's range;
if not reset to the default */
if (wdt_set_heartbeat(heartbeat)) {
wdt_set_heartbeat(WD_TIMO);
printk(KERN_INFO "wdt: heartbeat value must be 0<heartbeat<65536, using %d\n",
printk(KERN_INFO "wdt: heartbeat value must be 0 < heartbeat < 65536, using %d\n",
WD_TIMO);
}
if (!request_region(io, 8, "wdt501p")) {
printk(KERN_ERR "wdt: I/O address 0x%04x already in use\n", io);
printk(KERN_ERR
"wdt: I/O address 0x%04x already in use\n", io);
ret = -EBUSY;
goto out;
}
ret = request_irq(irq, wdt_interrupt, IRQF_DISABLED, "wdt501p", NULL);
if(ret) {
if (ret) {
printk(KERN_ERR "wdt: IRQ %d is not free.\n", irq);
goto outreg;
}
ret = register_reboot_notifier(&wdt_notifier);
if(ret) {
printk(KERN_ERR "wdt: cannot register reboot notifier (err=%d)\n", ret);
if (ret) {
printk(KERN_ERR
"wdt: cannot register reboot notifier (err=%d)\n", ret);
goto outirq;
}
#ifdef CONFIG_WDT_501
ret = misc_register(&temp_miscdev);
if (ret) {
printk(KERN_ERR "wdt: cannot register miscdev on minor=%d (err=%d)\n",
printk(KERN_ERR
"wdt: cannot register miscdev on minor=%d (err=%d)\n",
TEMP_MINOR, ret);
goto outrbt;
}
......@@ -627,7 +637,8 @@ static int __init wdt_init(void)
ret = misc_register(&wdt_miscdev);
if (ret) {
printk(KERN_ERR "wdt: cannot register miscdev on minor=%d (err=%d)\n",
printk(KERN_ERR
"wdt: cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
goto outmisc;
}
......@@ -636,7 +647,8 @@ static int __init wdt_init(void)
printk(KERN_INFO "WDT500/501-P driver 0.10 at 0x%04x (Interrupt %d). heartbeat=%d sec (nowayout=%d)\n",
io, irq, heartbeat, nowayout);
#ifdef CONFIG_WDT_501
printk(KERN_INFO "wdt: Fan Tachometer is %s\n", (tachometer ? "Enabled" : "Disabled"));
printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
(tachometer ? "Enabled" : "Disabled"));
#endif /* CONFIG_WDT_501 */
out:
......@@ -651,7 +663,7 @@ static int __init wdt_init(void)
outirq:
free_irq(irq, NULL);
outreg:
release_region(io,8);
release_region(io, 8);
goto out;
}
......
......@@ -29,9 +29,11 @@
* JP Nollmann : Added support for PCI wdt501p
* Alan Cox : Split ISA and PCI cards into two drivers
* Jeff Garzik : PCI cleanups
* Tigran Aivazian : Restructured wdtpci_init_one() to handle failures
* Tigran Aivazian : Restructured wdtpci_init_one() to handle
* failures
* Joel Becker : Added WDIOC_GET/SETTIMEOUT
* Zwane Mwaikambo : Magic char closing, locking changes, cleanups
* Zwane Mwaikambo : Magic char closing, locking changes,
* cleanups
* Matt Domsch : nowayout module option
*/
......@@ -47,9 +49,9 @@
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/pci.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#define WDT_IS_PCI
......@@ -73,7 +75,7 @@
/* We can only use 1 card due to the /dev/watchdog restriction */
static int dev_count;
static struct semaphore open_sem;
static unsigned long open_lock;
static DEFINE_SPINLOCK(wdtpci_lock);
static char expect_close;
......@@ -86,18 +88,23 @@ static int irq;
static int heartbeat = WD_TIMO;
static int wd_heartbeat;
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0<heartbeat<65536, default=" __MODULE_STRING(WD_TIMO) ")");
MODULE_PARM_DESC(heartbeat,
"Watchdog heartbeat in seconds. (0<heartbeat<65536, default="
__MODULE_STRING(WD_TIMO) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
MODULE_PARM_DESC(nowayout,
"Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
#ifdef CONFIG_WDT_501_PCI
/* Support for the Fan Tachometer on the PCI-WDT501 */
static int tachometer;
module_param(tachometer, int, 0);
MODULE_PARM_DESC(tachometer, "PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
MODULE_PARM_DESC(tachometer,
"PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
#endif /* CONFIG_WDT_501_PCI */
/*
......@@ -106,16 +113,19 @@ MODULE_PARM_DESC(tachometer, "PCI-WDT501 Fan Tachometer support (0=disable, defa
static void wdtpci_ctr_mode(int ctr, int mode)
{
ctr<<=6;
ctr|=0x30;
ctr|=(mode<<1);
outb_p(ctr, WDT_CR);
ctr <<= 6;
ctr |= 0x30;
ctr |= (mode << 1);
outb(ctr, WDT_CR);
udelay(8);
}
static void wdtpci_ctr_load(int ctr, int val)
{
outb_p(val&0xFF, WDT_COUNT0+ctr);
outb_p(val>>8, WDT_COUNT0+ctr);
outb(val & 0xFF, WDT_COUNT0 + ctr);
udelay(8);
outb(val >> 8, WDT_COUNT0 + ctr);
udelay(8);
}
/**
......@@ -134,23 +144,35 @@ static int wdtpci_start(void)
* "pet" the watchdog, as Access says.
* This resets the clock outputs.
*/
inb_p(WDT_DC); /* Disable watchdog */
wdtpci_ctr_mode(2,0); /* Program CTR2 for Mode 0: Pulse on Terminal Count */
outb_p(0, WDT_DC); /* Enable watchdog */
inb_p(WDT_DC); /* Disable watchdog */
outb_p(0, WDT_CLOCK); /* 2.0833MHz clock */
inb_p(WDT_BUZZER); /* disable */
inb_p(WDT_OPTONOTRST); /* disable */
inb_p(WDT_OPTORST); /* disable */
inb_p(WDT_PROGOUT); /* disable */
wdtpci_ctr_mode(0,3); /* Program CTR0 for Mode 3: Square Wave Generator */
wdtpci_ctr_mode(1,2); /* Program CTR1 for Mode 2: Rate Generator */
wdtpci_ctr_mode(2,1); /* Program CTR2 for Mode 1: Retriggerable One-Shot */
wdtpci_ctr_load(0,20833); /* count at 100Hz */
wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */
inb(WDT_DC); /* Disable watchdog */
udelay(8);
wdtpci_ctr_mode(2, 0); /* Program CTR2 for Mode 0:
Pulse on Terminal Count */
outb(0, WDT_DC); /* Enable watchdog */
udelay(8);
inb(WDT_DC); /* Disable watchdog */
udelay(8);
outb(0, WDT_CLOCK); /* 2.0833MHz clock */
udelay(8);
inb(WDT_BUZZER); /* disable */
udelay(8);
inb(WDT_OPTONOTRST); /* disable */
udelay(8);
inb(WDT_OPTORST); /* disable */
udelay(8);
inb(WDT_PROGOUT); /* disable */
udelay(8);
wdtpci_ctr_mode(0, 3); /* Program CTR0 for Mode 3:
Square Wave Generator */
wdtpci_ctr_mode(1, 2); /* Program CTR1 for Mode 2:
Rate Generator */
wdtpci_ctr_mode(2, 1); /* Program CTR2 for Mode 1:
Retriggerable One-Shot */
wdtpci_ctr_load(0, 20833); /* count at 100Hz */
wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */
/* DO NOT LOAD CTR2 on PCI card! -- JPN */
outb_p(0, WDT_DC); /* Enable watchdog */
outb(0, WDT_DC); /* Enable watchdog */
udelay(8);
spin_unlock_irqrestore(&wdtpci_lock, flags);
return 0;
......@@ -162,14 +184,15 @@ static int wdtpci_start(void)
* Stop the watchdog driver.
*/
static int wdtpci_stop (void)
static int wdtpci_stop(void)
{
unsigned long flags;
/* Turn the card off */
spin_lock_irqsave(&wdtpci_lock, flags);
inb_p(WDT_DC); /* Disable watchdog */
wdtpci_ctr_load(2,0); /* 0 length reset pulses now */
inb(WDT_DC); /* Disable watchdog */
udelay(8);
wdtpci_ctr_load(2, 0); /* 0 length reset pulses now */
spin_unlock_irqrestore(&wdtpci_lock, flags);
return 0;
}
......@@ -177,20 +200,23 @@ static int wdtpci_stop (void)
/**
* wdtpci_ping:
*
* Reload counter one with the watchdog heartbeat. We don't bother reloading
* the cascade counter.
* Reload counter one with the watchdog heartbeat. We don't bother
* reloading the cascade counter.
*/
static int wdtpci_ping(void)
{
unsigned long flags;
/* Write a watchdog value */
spin_lock_irqsave(&wdtpci_lock, flags);
inb_p(WDT_DC); /* Disable watchdog */
wdtpci_ctr_mode(1,2); /* Re-Program CTR1 for Mode 2: Rate Generator */
wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */
outb_p(0, WDT_DC); /* Enable watchdog */
/* Write a watchdog value */
inb(WDT_DC); /* Disable watchdog */
udelay(8);
wdtpci_ctr_mode(1, 2); /* Re-Program CTR1 for Mode 2:
Rate Generator */
wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */
outb(0, WDT_DC); /* Enable watchdog */
udelay(8);
spin_unlock_irqrestore(&wdtpci_lock, flags);
return 0;
}
......@@ -199,14 +225,14 @@ static int wdtpci_ping(void)
* wdtpci_set_heartbeat:
* @t: the new heartbeat value that needs to be set.
*
* Set a new heartbeat value for the watchdog device. If the heartbeat value is
* incorrect we keep the old value and return -EINVAL. If successfull we
* return 0.
* Set a new heartbeat value for the watchdog device. If the heartbeat
* value is incorrect we keep the old value and return -EINVAL.
* If successful we return 0.
*/
static int wdtpci_set_heartbeat(int t)
{
/* Arbitrary, can't find the card's limits */
if ((t < 1) || (t > 65535))
if (t < 1 || t > 65535)
return -EINVAL;
heartbeat = t;
......@@ -227,9 +253,14 @@ static int wdtpci_set_heartbeat(int t)
static int wdtpci_get_status(int *status)
{
unsigned char new_status=inb_p(WDT_SR);
unsigned char new_status;
unsigned long flags;
spin_lock_irqsave(&wdtpci_lock, flags);
new_status = inb(WDT_SR);
spin_unlock_irqrestore(&wdtpci_lock, flags);
*status=0;
*status = 0;
if (new_status & WDC_SR_ISOI0)
*status |= WDIOF_EXTERN1;
if (new_status & WDC_SR_ISII1)
......@@ -259,8 +290,12 @@ static int wdtpci_get_status(int *status)
static int wdtpci_get_temperature(int *temperature)
{
unsigned short c=inb_p(WDT_RT);
unsigned short c;
unsigned long flags;
spin_lock_irqsave(&wdtpci_lock, flags);
c = inb(WDT_RT);
udelay(8);
spin_unlock_irqrestore(&wdtpci_lock, flags);
*temperature = (c * 11 / 15) + 7;
return 0;
}
......@@ -282,13 +317,21 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
* Read the status register see what is up and
* then printk it.
*/
unsigned char status=inb_p(WDT_SR);
unsigned char status;
spin_lock(&wdtpci_lock);
status = inb(WDT_SR);
udelay(8);
printk(KERN_CRIT PFX "status %d\n", status);
#ifdef CONFIG_WDT_501_PCI
if (!(status & WDC_SR_TGOOD))
printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",inb_p(WDT_RT));
if (!(status & WDC_SR_TGOOD)) {
u8 alarm = inb(WDT_RT);
printk(KERN_CRIT PFX "Overheat alarm.(%d)\n", alarm);
udelay(8);
}
if (!(status & WDC_SR_PSUOVER))
printk(KERN_CRIT PFX "PSU over voltage.\n");
if (!(status & WDC_SR_PSUUNDR))
......@@ -310,6 +353,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
printk(KERN_CRIT PFX "Reset in 5ms.\n");
#endif
}
spin_unlock(&wdtpci_lock);
return IRQ_HANDLED;
}
......@@ -325,7 +369,8 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
* write of data will do, as we we don't define content meaning.
*/
static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
static ssize_t wdtpci_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
if (count) {
if (!nowayout) {
......@@ -335,7 +380,7 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co
for (i = 0; i != count; i++) {
char c;
if(get_user(c, buf+i))
if (get_user(c, buf+i))
return -EFAULT;
if (c == 'V')
expect_close = 42;
......@@ -343,13 +388,11 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co
}
wdtpci_ping();
}
return count;
}
/**
* wdtpci_ioctl:
* @inode: inode of the device
* @file: file handle to the device
* @cmd: watchdog command
* @arg: argument pointer
......@@ -359,7 +402,7 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co
* querying capabilities and current status.
*/
static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
static long wdtpci_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
int new_heartbeat;
......@@ -383,13 +426,11 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd
ident.options |= WDIOF_FANFAULT;
#endif /* CONFIG_WDT_501_PCI */
switch(cmd)
{
switch (cmd) {
default:
return -ENOTTY;
case WDIOC_GETSUPPORT:
return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0;
return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
wdtpci_get_status(&status);
return put_user(status, p);
......@@ -401,10 +442,8 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd
case WDIOC_SETTIMEOUT:
if (get_user(new_heartbeat, p))
return -EFAULT;
if (wdtpci_set_heartbeat(new_heartbeat))
return -EINVAL;
wdtpci_ping();
/* Fall */
case WDIOC_GETTIMEOUT:
......@@ -426,12 +465,11 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd
static int wdtpci_open(struct inode *inode, struct file *file)
{
if (down_trylock(&open_sem))
if (test_and_set_bit(0, &open_lock))
return -EBUSY;
if (nowayout) {
if (nowayout)
__module_get(THIS_MODULE);
}
/*
* Activate
*/
......@@ -460,7 +498,7 @@ static int wdtpci_release(struct inode *inode, struct file *file)
wdtpci_ping();
}
expect_close = 0;
up(&open_sem);
clear_bit(0, &open_lock);
return 0;
}
......@@ -476,14 +514,15 @@ static int wdtpci_release(struct inode *inode, struct file *file)
* fahrenheit. It was designed by an imperial measurement luddite.
*/
static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr)
static ssize_t wdtpci_temp_read(struct file *file, char __user *buf,
size_t count, loff_t *ptr)
{
int temperature;
if (wdtpci_get_temperature(&temperature))
return -EFAULT;
if (copy_to_user (buf, &temperature, 1))
if (copy_to_user(buf, &temperature, 1))
return -EFAULT;
return 1;
......@@ -531,10 +570,8 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file)
static int wdtpci_notify_sys(struct notifier_block *this, unsigned long code,
void *unused)
{
if (code==SYS_DOWN || code==SYS_HALT) {
/* Turn the card off */
if (code == SYS_DOWN || code == SYS_HALT)
wdtpci_stop();
}
return NOTIFY_DONE;
}
......@@ -547,7 +584,7 @@ static const struct file_operations wdtpci_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = wdtpci_write,
.ioctl = wdtpci_ioctl,
.unlocked_ioctl = wdtpci_ioctl,
.open = wdtpci_open,
.release = wdtpci_release,
};
......@@ -584,72 +621,76 @@ static struct notifier_block wdtpci_notifier = {
};
static int __devinit wdtpci_init_one (struct pci_dev *dev,
static int __devinit wdtpci_init_one(struct pci_dev *dev,
const struct pci_device_id *ent)
{
int ret = -EIO;
dev_count++;
if (dev_count > 1) {
printk (KERN_ERR PFX "this driver only supports 1 device\n");
printk(KERN_ERR PFX "This driver only supports one device\n");
return -ENODEV;
}
if (pci_enable_device (dev)) {
printk (KERN_ERR PFX "Not possible to enable PCI Device\n");
if (pci_enable_device(dev)) {
printk(KERN_ERR PFX "Not possible to enable PCI Device\n");
return -ENODEV;
}
if (pci_resource_start (dev, 2) == 0x0000) {
printk (KERN_ERR PFX "No I/O-Address for card detected\n");
if (pci_resource_start(dev, 2) == 0x0000) {
printk(KERN_ERR PFX "No I/O-Address for card detected\n");
ret = -ENODEV;
goto out_pci;
}
sema_init(&open_sem, 1);
irq = dev->irq;
io = pci_resource_start (dev, 2);
io = pci_resource_start(dev, 2);
if (request_region (io, 16, "wdt_pci") == NULL) {
printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", io);
if (request_region(io, 16, "wdt_pci") == NULL) {
printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", io);
goto out_pci;
}
if (request_irq (irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
if (request_irq(irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED,
"wdt_pci", &wdtpci_miscdev)) {
printk (KERN_ERR PFX "IRQ %d is not free\n", irq);
printk(KERN_ERR PFX "IRQ %d is not free\n", irq);
goto out_reg;
}
printk ("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n",
printk(KERN_INFO
"PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n",
io, irq);
/* Check that the heartbeat value is within it's range ; if not reset to the default */
/* Check that the heartbeat value is within its range;
if not reset to the default */
if (wdtpci_set_heartbeat(heartbeat)) {
wdtpci_set_heartbeat(WD_TIMO);
printk(KERN_INFO PFX "heartbeat value must be 0<heartbeat<65536, using %d\n",
printk(KERN_INFO PFX
"heartbeat value must be 0 < heartbeat < 65536, using %d\n",
WD_TIMO);
}
ret = register_reboot_notifier (&wdtpci_notifier);
ret = register_reboot_notifier(&wdtpci_notifier);
if (ret) {
printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
printk(KERN_ERR PFX
"cannot register reboot notifier (err=%d)\n", ret);
goto out_irq;
}
#ifdef CONFIG_WDT_501_PCI
ret = misc_register (&temp_miscdev);
ret = misc_register(&temp_miscdev);
if (ret) {
printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
printk(KERN_ERR PFX
"cannot register miscdev on minor=%d (err=%d)\n",
TEMP_MINOR, ret);
goto out_rbt;
}
#endif /* CONFIG_WDT_501_PCI */
ret = misc_register (&wdtpci_miscdev);
ret = misc_register(&wdtpci_miscdev);
if (ret) {
printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
printk(KERN_ERR PFX
"cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
goto out_misc;
}
......@@ -657,7 +698,8 @@ static int __devinit wdtpci_init_one (struct pci_dev *dev,
printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
heartbeat, nowayout);
#ifdef CONFIG_WDT_501_PCI
printk(KERN_INFO "wdt: Fan Tachometer is %s\n", (tachometer ? "Enabled" : "Disabled"));
printk(KERN_INFO "wdt: Fan Tachometer is %s\n",
(tachometer ? "Enabled" : "Disabled"));
#endif /* CONFIG_WDT_501_PCI */
ret = 0;
......@@ -673,14 +715,14 @@ static int __devinit wdtpci_init_one (struct pci_dev *dev,
out_irq:
free_irq(irq, &wdtpci_miscdev);
out_reg:
release_region (io, 16);
release_region(io, 16);
out_pci:
pci_disable_device(dev);
goto out;
}
static void __devexit wdtpci_remove_one (struct pci_dev *pdev)
static void __devexit wdtpci_remove_one(struct pci_dev *pdev)
{
/* here we assume only one device will ever have
* been picked up and registered by probe function */
......@@ -728,7 +770,7 @@ static struct pci_driver wdtpci_driver = {
static void __exit wdtpci_cleanup(void)
{
pci_unregister_driver (&wdtpci_driver);
pci_unregister_driver(&wdtpci_driver);
}
......@@ -742,7 +784,7 @@ static void __exit wdtpci_cleanup(void)
static int __init wdtpci_init(void)
{
return pci_register_driver (&wdtpci_driver);
return pci_register_driver(&wdtpci_driver);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment