Commit 7d71d5b2 authored by Gerhard Sittig's avatar Gerhard Sittig Committed by Anatolij Gustschin

clk: mpc5xxx: switch to COMMON_CLK, retire PPC_CLOCK

the setup before the change was
- arch/powerpc/Kconfig had the PPC_CLOCK option, off by default
- depending on the PPC_CLOCK option the arch/powerpc/kernel/clock.c file
  was built, which implements the clk.h API but always returns -ENOSYS
  unless a platform registers specific callbacks
- the MPC52xx platform selected PPC_CLOCK but did not register any
  callbacks, thus all clk.h API calls keep resulting in -ENOSYS errors
  (which is OK, all peripheral drivers deal with the situation)
- the MPC512x platform selected PPC_CLOCK and registered specific
  callbacks implemented in arch/powerpc/platforms/512x/clock.c, thus
  provided real support for the clock API
- no other powerpc platform did select PPC_CLOCK

the situation after the change is
- the MPC512x platform implements the COMMON_CLK interface, and thus the
  PPC_CLOCK approach in arch/powerpc/platforms/512x/clock.c has become
  obsolete
- the MPC52xx platform still lacks genuine support for the clk.h API
  while this is not a change against the previous situation (the error
  code returned from COMMON_CLK stubs differs but every call still
  results in an error)
- with all references gone, the arch/powerpc/kernel/clock.c wrapper and
  the PPC_CLOCK option have become obsolete, as did the clk_interface.h
  header file

the switch from PPC_CLOCK to COMMON_CLK is done for all platforms within
the same commit such that multiplatform kernels (the combination of 512x
and 52xx within one executable) keep working

Cc: Mike Turquette <mturquette@linaro.org>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: default avatarGerhard Sittig <gsi@denx.de>
Signed-off-by: default avatarAnatolij Gustschin <agust@denx.de>
parent 124fe7c5
...@@ -1040,11 +1040,6 @@ config KEYS_COMPAT ...@@ -1040,11 +1040,6 @@ config KEYS_COMPAT
source "crypto/Kconfig" source "crypto/Kconfig"
config PPC_CLOCK
bool
default n
select HAVE_CLK
config PPC_LIB_RHEAP config PPC_LIB_RHEAP
bool bool
......
#ifndef __ASM_POWERPC_CLK_INTERFACE_H
#define __ASM_POWERPC_CLK_INTERFACE_H
#include <linux/clk.h>
struct clk_interface {
struct clk* (*clk_get) (struct device *dev, const char *id);
int (*clk_enable) (struct clk *clk);
void (*clk_disable) (struct clk *clk);
unsigned long (*clk_get_rate) (struct clk *clk);
void (*clk_put) (struct clk *clk);
long (*clk_round_rate) (struct clk *clk, unsigned long rate);
int (*clk_set_rate) (struct clk *clk, unsigned long rate);
int (*clk_set_parent) (struct clk *clk, struct clk *parent);
struct clk* (*clk_get_parent) (struct clk *clk);
};
extern struct clk_interface clk_functions;
#endif /* __ASM_POWERPC_CLK_INTERFACE_H */
...@@ -48,7 +48,6 @@ obj-$(CONFIG_ALTIVEC) += vecemu.o ...@@ -48,7 +48,6 @@ obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
obj-$(CONFIG_PPC_P7_NAP) += idle_power7.o obj-$(CONFIG_PPC_P7_NAP) += idle_power7.o
obj-$(CONFIG_PPC_OF) += of_platform.o prom_parse.o obj-$(CONFIG_PPC_OF) += of_platform.o prom_parse.o
obj-$(CONFIG_PPC_CLOCK) += clock.o
procfs-y := proc_powerpc.o procfs-y := proc_powerpc.o
obj-$(CONFIG_PROC_FS) += $(procfs-y) obj-$(CONFIG_PROC_FS) += $(procfs-y)
rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o
......
/*
* Dummy clk implementations for powerpc.
* These need to be overridden in platform code.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <asm/clk_interface.h>
struct clk_interface clk_functions;
struct clk *clk_get(struct device *dev, const char *id)
{
if (clk_functions.clk_get)
return clk_functions.clk_get(dev, id);
return ERR_PTR(-ENOSYS);
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
{
if (clk_functions.clk_put)
clk_functions.clk_put(clk);
}
EXPORT_SYMBOL(clk_put);
int clk_enable(struct clk *clk)
{
if (clk_functions.clk_enable)
return clk_functions.clk_enable(clk);
return -ENOSYS;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
if (clk_functions.clk_disable)
clk_functions.clk_disable(clk);
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
if (clk_functions.clk_get_rate)
return clk_functions.clk_get_rate(clk);
return 0;
}
EXPORT_SYMBOL(clk_get_rate);
long clk_round_rate(struct clk *clk, unsigned long rate)
{
if (clk_functions.clk_round_rate)
return clk_functions.clk_round_rate(clk, rate);
return -ENOSYS;
}
EXPORT_SYMBOL(clk_round_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
{
if (clk_functions.clk_set_rate)
return clk_functions.clk_set_rate(clk, rate);
return -ENOSYS;
}
EXPORT_SYMBOL(clk_set_rate);
struct clk *clk_get_parent(struct clk *clk)
{
if (clk_functions.clk_get_parent)
return clk_functions.clk_get_parent(clk);
return ERR_PTR(-ENOSYS);
}
EXPORT_SYMBOL(clk_get_parent);
int clk_set_parent(struct clk *clk, struct clk *parent)
{
if (clk_functions.clk_set_parent)
return clk_functions.clk_set_parent(clk, parent);
return -ENOSYS;
}
EXPORT_SYMBOL(clk_set_parent);
config PPC_MPC512x config PPC_MPC512x
bool "512x-based boards" bool "512x-based boards"
depends on 6xx depends on 6xx
select COMMON_CLK
select FSL_SOC select FSL_SOC
select IPIC select IPIC
select PPC_CLOCK
select PPC_PCI_CHOICE select PPC_PCI_CHOICE
select FSL_PCI if PCI select FSL_PCI if PCI
select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_OPTIONAL_GPIOLIB
......
# #
# Makefile for the Freescale PowerPC 512x linux kernel. # Makefile for the Freescale PowerPC 512x linux kernel.
# #
obj-$(CONFIG_PPC_CLOCK) += clock.o
obj-$(CONFIG_COMMON_CLK) += clock-commonclk.o obj-$(CONFIG_COMMON_CLK) += clock-commonclk.o
obj-y += mpc512x_shared.o obj-y += mpc512x_shared.o
obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o obj-$(CONFIG_MPC5121_ADS) += mpc5121_ads.o mpc5121_ads_cpld.o
......
/*
* Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: John Rigby <jrigby@freescale.com>
*
* Implements the clk api defined in include/linux/clk.h
*
* Original based on linux/arch/arm/mach-integrator/clock.c
*
* Copyright (C) 2004 ARM Limited.
* Written by Deep Blue Solutions Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <asm/mpc5xxx.h>
#include <asm/mpc5121.h>
#include <asm/clk_interface.h>
#include "mpc512x.h"
#undef CLK_DEBUG
static int clocks_initialized;
#define CLK_HAS_RATE 0x1 /* has rate in MHz */
#define CLK_HAS_CTRL 0x2 /* has control reg and bit */
struct clk {
struct list_head node;
char name[32];
int flags;
struct device *dev;
unsigned long rate;
struct module *owner;
void (*calc) (struct clk *);
struct clk *parent;
int reg, bit; /* CLK_HAS_CTRL */
int div_shift; /* only used by generic_div_clk_calc */
};
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static struct clk *mpc5121_clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
int dev_match;
int id_match;
if (dev == NULL || id == NULL)
return clk;
mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
dev_match = id_match = 0;
if (dev == p->dev)
dev_match++;
if (strcmp(id, p->name) == 0)
id_match++;
if ((dev_match || id_match) && try_module_get(p->owner)) {
clk = p;
break;
}
}
mutex_unlock(&clocks_mutex);
return clk;
}
#ifdef CLK_DEBUG
static void dump_clocks(void)
{
struct clk *p;
mutex_lock(&clocks_mutex);
printk(KERN_INFO "CLOCKS:\n");
list_for_each_entry(p, &clocks, node) {
pr_info(" %s=%ld", p->name, p->rate);
if (p->parent)
pr_cont(" %s=%ld", p->parent->name,
p->parent->rate);
if (p->flags & CLK_HAS_CTRL)
pr_cont(" reg/bit=%d/%d", p->reg, p->bit);
pr_cont("\n");
}
mutex_unlock(&clocks_mutex);
}
#define DEBUG_CLK_DUMP() dump_clocks()
#else
#define DEBUG_CLK_DUMP()
#endif
static void mpc5121_clk_put(struct clk *clk)
{
module_put(clk->owner);
}
#define NRPSC 12
struct mpc512x_clockctl {
u32 spmr; /* System PLL Mode Reg */
u32 sccr[2]; /* System Clk Ctrl Reg 1 & 2 */
u32 scfr1; /* System Clk Freq Reg 1 */
u32 scfr2; /* System Clk Freq Reg 2 */
u32 reserved;
u32 bcr; /* Bread Crumb Reg */
u32 pccr[NRPSC]; /* PSC Clk Ctrl Reg 0-11 */
u32 spccr; /* SPDIF Clk Ctrl Reg */
u32 cccr; /* CFM Clk Ctrl Reg */
u32 dccr; /* DIU Clk Cnfg Reg */
};
static struct mpc512x_clockctl __iomem *clockctl;
static int mpc5121_clk_enable(struct clk *clk)
{
unsigned int mask;
if (clk->flags & CLK_HAS_CTRL) {
mask = in_be32(&clockctl->sccr[clk->reg]);
mask |= 1 << clk->bit;
out_be32(&clockctl->sccr[clk->reg], mask);
}
return 0;
}
static void mpc5121_clk_disable(struct clk *clk)
{
unsigned int mask;
if (clk->flags & CLK_HAS_CTRL) {
mask = in_be32(&clockctl->sccr[clk->reg]);
mask &= ~(1 << clk->bit);
out_be32(&clockctl->sccr[clk->reg], mask);
}
}
static unsigned long mpc5121_clk_get_rate(struct clk *clk)
{
if (clk->flags & CLK_HAS_RATE)
return clk->rate;
else
return 0;
}
static long mpc5121_clk_round_rate(struct clk *clk, unsigned long rate)
{
return rate;
}
static int mpc5121_clk_set_rate(struct clk *clk, unsigned long rate)
{
return 0;
}
static int clk_register(struct clk *clk)
{
mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
mutex_unlock(&clocks_mutex);
return 0;
}
static unsigned long spmf_mult(void)
{
/*
* Convert spmf to multiplier
*/
static int spmf_to_mult[] = {
68, 1, 12, 16,
20, 24, 28, 32,
36, 40, 44, 48,
52, 56, 60, 64
};
int spmf = (in_be32(&clockctl->spmr) >> 24) & 0xf;
return spmf_to_mult[spmf];
}
static unsigned long sysdiv_div_x_2(void)
{
/*
* Convert sysdiv to divisor x 2
* Some divisors have fractional parts so
* multiply by 2 then divide by this value
*/
static int sysdiv_to_div_x_2[] = {
4, 5, 6, 7,
8, 9, 10, 14,
12, 16, 18, 22,
20, 24, 26, 30,
28, 32, 34, 38,
36, 40, 42, 46,
44, 48, 50, 54,
52, 56, 58, 62,
60, 64, 66,
};
int sysdiv = (in_be32(&clockctl->scfr2) >> 26) & 0x3f;
return sysdiv_to_div_x_2[sysdiv];
}
static unsigned long ref_to_sys(unsigned long rate)
{
rate *= spmf_mult();
rate *= 2;
rate /= sysdiv_div_x_2();
return rate;
}
static unsigned long sys_to_ref(unsigned long rate)
{
rate *= sysdiv_div_x_2();
rate /= 2;
rate /= spmf_mult();
return rate;
}
static long ips_to_ref(unsigned long rate)
{
int ips_div = (in_be32(&clockctl->scfr1) >> 23) & 0x7;
rate *= ips_div; /* csb_clk = ips_clk * ips_div */
rate *= 2; /* sys_clk = csb_clk * 2 */
return sys_to_ref(rate);
}
static unsigned long devtree_getfreq(char *clockname)
{
struct device_node *np;
const unsigned int *prop;
unsigned int val = 0;
np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr");
if (np) {
prop = of_get_property(np, clockname, NULL);
if (prop)
val = *prop;
of_node_put(np);
}
return val;
}
static void ref_clk_calc(struct clk *clk)
{
unsigned long rate;
rate = devtree_getfreq("bus-frequency");
if (rate == 0) {
printk(KERN_ERR "No bus-frequency in dev tree\n");
clk->rate = 0;
return;
}
clk->rate = ips_to_ref(rate);
}
static struct clk ref_clk = {
.name = "ref_clk",
.calc = ref_clk_calc,
};
static void sys_clk_calc(struct clk *clk)
{
clk->rate = ref_to_sys(ref_clk.rate);
}
static struct clk sys_clk = {
.name = "sys_clk",
.calc = sys_clk_calc,
};
static void diu_clk_calc(struct clk *clk)
{
int diudiv_x_2 = in_be32(&clockctl->scfr1) & 0xff;
unsigned long rate;
rate = sys_clk.rate;
rate *= 2;
rate /= diudiv_x_2;
clk->rate = rate;
}
static void viu_clk_calc(struct clk *clk)
{
unsigned long rate;
rate = sys_clk.rate;
rate /= 2;
clk->rate = rate;
}
static void half_clk_calc(struct clk *clk)
{
clk->rate = clk->parent->rate / 2;
}
static void generic_div_clk_calc(struct clk *clk)
{
int div = (in_be32(&clockctl->scfr1) >> clk->div_shift) & 0x7;
clk->rate = clk->parent->rate / div;
}
static void unity_clk_calc(struct clk *clk)
{
clk->rate = clk->parent->rate;
}
static struct clk csb_clk = {
.name = "csb_clk",
.calc = half_clk_calc,
.parent = &sys_clk,
};
static void e300_clk_calc(struct clk *clk)
{
int spmf = (in_be32(&clockctl->spmr) >> 16) & 0xf;
int ratex2 = clk->parent->rate * spmf;
clk->rate = ratex2 / 2;
}
static struct clk e300_clk = {
.name = "e300_clk",
.calc = e300_clk_calc,
.parent = &csb_clk,
};
static struct clk ips_clk = {
.name = "ips_clk",
.calc = generic_div_clk_calc,
.parent = &csb_clk,
.div_shift = 23,
};
/*
* Clocks controlled by SCCR1 (.reg = 0)
*/
static struct clk lpc_clk = {
.name = "lpc_clk",
.flags = CLK_HAS_CTRL,
.reg = 0,
.bit = 30,
.calc = generic_div_clk_calc,
.parent = &ips_clk,
.div_shift = 11,
};
static struct clk nfc_clk = {
.name = "nfc_clk",
.flags = CLK_HAS_CTRL,
.reg = 0,
.bit = 29,
.calc = generic_div_clk_calc,
.parent = &ips_clk,
.div_shift = 8,
};
static struct clk pata_clk = {
.name = "pata_clk",
.flags = CLK_HAS_CTRL,
.reg = 0,
.bit = 28,
.calc = unity_clk_calc,
.parent = &ips_clk,
};
/*
* PSC clocks (bits 27 - 16)
* are setup elsewhere
*/
static struct clk sata_clk = {
.name = "sata_clk",
.flags = CLK_HAS_CTRL,
.reg = 0,
.bit = 14,
.calc = unity_clk_calc,
.parent = &ips_clk,
};
static struct clk fec_clk = {
.name = "fec_clk",
.flags = CLK_HAS_CTRL,
.reg = 0,
.bit = 13,
.calc = unity_clk_calc,
.parent = &ips_clk,
};
static struct clk pci_clk = {
.name = "pci_clk",
.flags = CLK_HAS_CTRL,
.reg = 0,
.bit = 11,
.calc = generic_div_clk_calc,
.parent = &csb_clk,
.div_shift = 20,
};
/*
* Clocks controlled by SCCR2 (.reg = 1)
*/
static struct clk diu_clk = {
.name = "diu_clk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 31,
.calc = diu_clk_calc,
};
static struct clk viu_clk = {
.name = "viu_clk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 18,
.calc = viu_clk_calc,
};
static struct clk axe_clk = {
.name = "axe_clk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 30,
.calc = unity_clk_calc,
.parent = &csb_clk,
};
static struct clk usb1_clk = {
.name = "usb1_clk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 28,
.calc = unity_clk_calc,
.parent = &csb_clk,
};
static struct clk usb2_clk = {
.name = "usb2_clk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 27,
.calc = unity_clk_calc,
.parent = &csb_clk,
};
static struct clk i2c_clk = {
.name = "i2c_clk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 26,
.calc = unity_clk_calc,
.parent = &ips_clk,
};
static struct clk mscan_clk = {
.name = "mscan_clk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 25,
.calc = unity_clk_calc,
.parent = &ips_clk,
};
static struct clk sdhc_clk = {
.name = "sdhc_clk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 24,
.calc = unity_clk_calc,
.parent = &ips_clk,
};
static struct clk mbx_bus_clk = {
.name = "mbx_bus_clk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 22,
.calc = half_clk_calc,
.parent = &csb_clk,
};
static struct clk mbx_clk = {
.name = "mbx_clk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 21,
.calc = unity_clk_calc,
.parent = &csb_clk,
};
static struct clk mbx_3d_clk = {
.name = "mbx_3d_clk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 20,
.calc = generic_div_clk_calc,
.parent = &mbx_bus_clk,
.div_shift = 14,
};
static void psc_mclk_in_calc(struct clk *clk)
{
clk->rate = devtree_getfreq("psc_mclk_in");
if (!clk->rate)
clk->rate = 25000000;
}
static struct clk psc_mclk_in = {
.name = "psc_mclk_in",
.calc = psc_mclk_in_calc,
};
static struct clk spdif_txclk = {
.name = "spdif_txclk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 23,
};
static struct clk spdif_rxclk = {
.name = "spdif_rxclk",
.flags = CLK_HAS_CTRL,
.reg = 1,
.bit = 23,
};
static void ac97_clk_calc(struct clk *clk)
{
/* ac97 bit clock is always 24.567 MHz */
clk->rate = 24567000;
}
static struct clk ac97_clk = {
.name = "ac97_clk_in",
.calc = ac97_clk_calc,
};
static struct clk *rate_clks[] = {
&ref_clk,
&sys_clk,
&diu_clk,
&viu_clk,
&csb_clk,
&e300_clk,
&ips_clk,
&fec_clk,
&sata_clk,
&pata_clk,
&nfc_clk,
&lpc_clk,
&mbx_bus_clk,
&mbx_clk,
&mbx_3d_clk,
&axe_clk,
&usb1_clk,
&usb2_clk,
&i2c_clk,
&mscan_clk,
&sdhc_clk,
&pci_clk,
&psc_mclk_in,
&spdif_txclk,
&spdif_rxclk,
&ac97_clk,
NULL
};
static void rate_clk_init(struct clk *clk)
{
if (clk->calc) {
clk->calc(clk);
clk->flags |= CLK_HAS_RATE;
clk_register(clk);
} else {
printk(KERN_WARNING
"Could not initialize clk %s without a calc routine\n",
clk->name);
}
}
static void rate_clks_init(void)
{
struct clk **cpp, *clk;
cpp = rate_clks;
while ((clk = *cpp++))
rate_clk_init(clk);
}
/*
* There are two clk enable registers with 32 enable bits each
* psc clocks and device clocks are all stored in dev_clks
*/
static struct clk dev_clks[2][32];
/*
* Given a psc number return the dev_clk
* associated with it
*/
static struct clk *psc_dev_clk(int pscnum)
{
int reg, bit;
struct clk *clk;
reg = 0;
bit = 27 - pscnum;
clk = &dev_clks[reg][bit];
clk->reg = 0;
clk->bit = bit;
return clk;
}
/*
* PSC clock rate calculation
*/
static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np)
{
unsigned long mclk_src = sys_clk.rate;
unsigned long mclk_div;
/*
* Can only change value of mclk divider
* when the divider is disabled.
*
* Zero is not a valid divider so minimum
* divider is 1
*
* disable/set divider/enable
*/
out_be32(&clockctl->pccr[pscnum], 0);
out_be32(&clockctl->pccr[pscnum], 0x00020000);
out_be32(&clockctl->pccr[pscnum], 0x00030000);
if (in_be32(&clockctl->pccr[pscnum]) & 0x80) {
clk->rate = spdif_rxclk.rate;
return;
}
switch ((in_be32(&clockctl->pccr[pscnum]) >> 14) & 0x3) {
case 0:
mclk_src = sys_clk.rate;
break;
case 1:
mclk_src = ref_clk.rate;
break;
case 2:
mclk_src = psc_mclk_in.rate;
break;
case 3:
mclk_src = spdif_txclk.rate;
break;
}
mclk_div = ((in_be32(&clockctl->pccr[pscnum]) >> 17) & 0x7fff) + 1;
clk->rate = mclk_src / mclk_div;
}
/*
* Find all psc nodes in device tree and assign a clock
* with name "psc%d_mclk" and dev pointing at the device
* returned from of_find_device_by_node
*/
static void psc_clks_init(void)
{
struct device_node *np;
struct platform_device *ofdev;
u32 reg;
const char *psc_compat;
psc_compat = mpc512x_select_psc_compat();
if (!psc_compat)
return;
for_each_compatible_node(np, NULL, psc_compat) {
if (!of_property_read_u32(np, "reg", &reg)) {
int pscnum = (reg & 0xf00) >> 8;
struct clk *clk = psc_dev_clk(pscnum);
clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL;
ofdev = of_find_device_by_node(np);
clk->dev = &ofdev->dev;
/*
* AC97 is special rate clock does
* not go through normal path
*/
if (of_device_is_compatible(np, "fsl,mpc5121-psc-ac97"))
clk->rate = ac97_clk.rate;
else
psc_calc_rate(clk, pscnum, np);
sprintf(clk->name, "psc%d_mclk", pscnum);
clk_register(clk);
clk_enable(clk);
}
}
}
static struct clk_interface mpc5121_clk_functions = {
.clk_get = mpc5121_clk_get,
.clk_enable = mpc5121_clk_enable,
.clk_disable = mpc5121_clk_disable,
.clk_get_rate = mpc5121_clk_get_rate,
.clk_put = mpc5121_clk_put,
.clk_round_rate = mpc5121_clk_round_rate,
.clk_set_rate = mpc5121_clk_set_rate,
.clk_set_parent = NULL,
.clk_get_parent = NULL,
};
int __init mpc5121_clk_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
if (np) {
clockctl = of_iomap(np, 0);
of_node_put(np);
}
if (!clockctl) {
printk(KERN_ERR "Could not map clock control registers\n");
return 0;
}
rate_clks_init();
psc_clks_init();
/* leave clockctl mapped forever */
/*iounmap(clockctl); */
DEBUG_CLK_DUMP();
clocks_initialized++;
clk_functions = mpc5121_clk_functions;
return 0;
}
config PPC_MPC52xx config PPC_MPC52xx
bool "52xx-based boards" bool "52xx-based boards"
depends on 6xx depends on 6xx
select PPC_CLOCK select COMMON_CLK
select PPC_PCI_CHOICE select PPC_PCI_CHOICE
config PPC_MPC5200_SIMPLE config PPC_MPC5200_SIMPLE
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment