[PATCH] CRIS update: drivers

Updates to device drivers.

* Use I/O and DMA allocators.
* Use wait_event_interruptible instead of interrutiple_sleep_on.
* Added spinlocks SMP.
* Changed restore_flags to local_irq_restore etc.
* Updated IDE driver include to fit 2.6.12.
Signed-off-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/cris/arch-v10/drivers/axisflashmap.c

@@ -11,6 +11,9 @@
  * partition split defined below.
  *
  * $Log: axisflashmap.c,v $
+ * Revision 1.11  2004/11/15 10:27:14  starvik
+ * Corrected typo (Thanks to Milton Miller <miltonm@bga.com>).
+ *
  * Revision 1.10  2004/08/16 12:37:22  starvik
  * Merge of Linux 2.6.8
  *
@@ -161,7 +164,7 @@
 #elif CONFIG_ETRAX_FLASH_BUSWIDTH==2
 #define flash_data __u16
 #elif CONFIG_ETRAX_FLASH_BUSWIDTH==4
-#define flash_data __u16
+#define flash_data __u32
 #endif
 
 /* From head.S */

arch/cris/arch-v10/drivers/ds1302.c

@@ -7,6 +7,15 @@
 *! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init
 *!
 *! $Log: ds1302.c,v $
+*! Revision 1.18  2005/01/24 09:11:26  mikaelam
+*! Minor changes to get DS1302 RTC chip driver to work
+*!
+*! Revision 1.17  2005/01/05 06:11:22  starvik
+*! No need to do local_irq_disable after local_irq_save.
+*!
+*! Revision 1.16  2004/12/13 12:21:52  starvik
+*! Added I/O and DMA allocators from Linux 2.4
+*!
 *! Revision 1.14  2004/08/24 06:48:43  starvik
 *! Whitespace cleanup
 *!
@@ -124,9 +133,9 @@
 *!
 *! ---------------------------------------------------------------------------
 *!
-*! (C) Copyright 1999, 2000, 2001  Axis Communications AB, LUND, SWEDEN
+*! (C) Copyright 1999, 2000, 2001, 2002, 2003, 2004  Axis Communications AB, LUND, SWEDEN
 *!
-*! $Id: ds1302.c,v 1.14 2004/08/24 06:48:43 starvik Exp $
+*! $Id: ds1302.c,v 1.18 2005/01/24 09:11:26 mikaelam Exp $
 *!
 *!***************************************************************************/
 
@@ -145,6 +154,7 @@
 #include <asm/arch/svinto.h>
 #include <asm/io.h>
 #include <asm/rtc.h>
+#include <asm/arch/io_interface_mux.h>
 
 #define RTC_MAJOR_NR 121 /* local major, change later */
 
@@ -320,7 +330,6 @@ get_rtc_time(struct rtc_time *rtc_tm)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	local_irq_disable();
 
 	rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
 	rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
@@ -419,7 +428,6 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			BIN_TO_BCD(yrs);
 
 			local_irq_save(flags);
-			local_irq_disable();
 			CMOS_WRITE(yrs, RTC_YEAR);
 			CMOS_WRITE(mon, RTC_MONTH);
 			CMOS_WRITE(day, RTC_DAY_OF_MONTH);
@@ -548,7 +556,9 @@ ds1302_probe(void)
 int __init
 ds1302_init(void) 
 {
+#ifdef CONFIG_ETRAX_I2C
 	i2c_init();
+#endif
 
 	if (!ds1302_probe()) {
 #ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
@@ -558,11 +568,28 @@ ds1302_init(void)
 		 *
 		 * Make sure that R_GEN_CONFIG is setup correct.
 		 */
-    		genconfig_shadow = ((genconfig_shadow &
-				     ~IO_MASK(R_GEN_CONFIG, ata)) | 
-				   (IO_STATE(R_GEN_CONFIG, ata, select)));    
-    		*R_GEN_CONFIG = genconfig_shadow;
+		/* Allocating the ATA interface will grab almost all
+		 * pins in I/O groups a, b, c and d.  A consequence of
+		 * allocating the ATA interface is that the fixed
+		 * interfaces shared RAM, parallel port 0, parallel
+		 * port 1, parallel port W, SCSI-8 port 0, SCSI-8 port
+		 * 1, SCSI-W, serial port 2, serial port 3,
+		 * synchronous serial port 3 and USB port 2 and almost
+		 * all GPIO pins on port g cannot be used.
+		 */
+		if (cris_request_io_interface(if_ata, "ds1302/ATA")) {
+			printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
+			return -1;
+		}
+
 #elif CONFIG_ETRAX_DS1302_RSTBIT == 0
+		if (cris_io_interface_allocate_pins(if_gpio_grp_a,
+						    'g',
+						    CONFIG_ETRAX_DS1302_RSTBIT,
+						    CONFIG_ETRAX_DS1302_RSTBIT)) {
+			printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
+			return -1;
+		}
 
 		/* Set the direction of this bit to out. */
 		genconfig_shadow = ((genconfig_shadow &

arch/cris/arch-v10/drivers/eeprom.c

@@ -20,6 +20,12 @@
 *!                                  in the spin-lock.
 *!
 *!  $Log: eeprom.c,v $
+*!  Revision 1.12  2005/06/19 17:06:46  starvik
+*!  Merge of Linux 2.6.12.
+*!
+*!  Revision 1.11  2005/01/26 07:14:46  starvik
+*!  Applied diff from kernel janitors (Nish Aravamudan).
+*!
 *!  Revision 1.10  2003/09/11 07:29:48  starvik
 *!  Merge of Linux 2.6.0-test5
 *!
@@ -94,6 +100,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/wait.h>
 #include <asm/uaccess.h>
 #include "i2c.h"
 
@@ -526,15 +533,10 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t
     return -EFAULT;
   }
   
-  while(eeprom.busy)
-  {
-    interruptible_sleep_on(&eeprom.wait_q);
-
-    /* bail out if we get interrupted */
+  wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
   if (signal_pending(current))
     return -EINTR;
 
-  }
   eeprom.busy++;
 
   page = (unsigned char) (p >> 8);
@@ -604,13 +606,10 @@ static ssize_t eeprom_write(struct file * file, const char * buf, size_t count,
     return -EFAULT;
   }
 
-  while(eeprom.busy)
-  {
-    interruptible_sleep_on(&eeprom.wait_q);
+  wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
   /* bail out if we get interrupted */
   if (signal_pending(current))
     return -EINTR;
-  }
   eeprom.busy++;
   for(i = 0; (i < EEPROM_RETRIES) && (restart > 0); i++)
   {

arch/cris/arch-v10/drivers/i2c.c

@@ -12,6 +12,15 @@
 *!                                 don't use PB_I2C if DS1302 uses same bits,
 *!                                 use PB.
 *! $Log: i2c.c,v $
+*! Revision 1.13  2005/03/07 13:13:07  starvik
+*! Added spinlocks to protect states etc
+*!
+*! Revision 1.12  2005/01/05 06:11:22  starvik
+*! No need to do local_irq_disable after local_irq_save.
+*!
+*! Revision 1.11  2004/12/13 12:21:52  starvik
+*! Added I/O and DMA allocators from Linux 2.4
+*!
 *! Revision 1.9  2004/08/24 06:49:14  starvik
 *! Whitespace cleanup
 *!
@@ -75,7 +84,7 @@
 *! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
 *!
 *!***************************************************************************/
-/* $Id: i2c.c,v 1.9 2004/08/24 06:49:14 starvik Exp $ */
+/* $Id: i2c.c,v 1.13 2005/03/07 13:13:07 starvik Exp $ */
 
 /****************** INCLUDE FILES SECTION ***********************************/
 
@@ -95,6 +104,7 @@
 #include <asm/arch/svinto.h>
 #include <asm/io.h>
 #include <asm/delay.h>
+#include <asm/arch/io_interface_mux.h>
 
 #include "i2c.h"
 
@@ -184,6 +194,7 @@ static const char i2c_name[] = "i2c";
 
 #define i2c_delay(usecs) udelay(usecs)
 
+static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */
 
 /****************** FUNCTION DEFINITION SECTION *************************/
 
@@ -488,13 +499,14 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
 	int error, cntr = 3;
 	unsigned long flags;
 
+	spin_lock(&i2c_lock);
+
 	do {
 		error = 0;
 		/*
 		 * we don't like to be interrupted
 		 */
 		local_irq_save(flags);
-		local_irq_disable();
 
 		i2c_start();
 		/*
@@ -538,6 +550,8 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
 
 	i2c_delay(CLOCK_LOW_TIME);
 
+	spin_unlock(&i2c_lock);
+
 	return -error;
 }
 
@@ -555,13 +569,14 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 	int error, cntr = 3;
 	unsigned long flags;
 
+	spin_lock(&i2c_lock);
+
 	do {
 		error = 0;
 		/*
 		 * we don't like to be interrupted
 		 */
 		local_irq_save(flags);
-		local_irq_disable();
 		/*
 		 * generate start condition
 		 */
@@ -620,6 +635,8 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
 		
 	} while(error && cntr--);
 
+	spin_unlock(&i2c_lock);
+
 	return b;
 }
 
@@ -686,15 +703,26 @@ static struct file_operations i2c_fops = {
 int __init
 i2c_init(void)
 {
+	static int res = 0;
+	static int first = 1;
+
+	if (!first) {
+		return res;
+	}
+
 	/* Setup and enable the Port B I2C interface */
 
 #ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
+	if ((res = cris_request_io_interface(if_i2c, "I2C"))) {
+		printk(KERN_CRIT "i2c_init: Failed to get IO interface\n");
+		return res;
+	}
+
 	*R_PORT_PB_I2C = port_pb_i2c_shadow |= 
 		IO_STATE(R_PORT_PB_I2C, i2c_en,  on) |
 		IO_FIELD(R_PORT_PB_I2C, i2c_d,   1)  |
 		IO_FIELD(R_PORT_PB_I2C, i2c_clk, 1)  |
 		IO_STATE(R_PORT_PB_I2C, i2c_oe_, enable);
-#endif
 
 	port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir0);
 	port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir1);
@@ -702,8 +730,26 @@ i2c_init(void)
 	*R_PORT_PB_DIR = (port_pb_dir_shadow |=
 			  IO_STATE(R_PORT_PB_DIR, dir0, input)  |
 			  IO_STATE(R_PORT_PB_DIR, dir1, output));
+#else
+        if ((res = cris_io_interface_allocate_pins(if_i2c,
+						   'b',
+                                                   CONFIG_ETRAX_I2C_DATA_PORT,
+						   CONFIG_ETRAX_I2C_DATA_PORT))) {
+		printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C data port\n");
+		return res;
+	} else if ((res = cris_io_interface_allocate_pins(if_i2c,
+							  'b',
+							  CONFIG_ETRAX_I2C_CLK_PORT,
+							  CONFIG_ETRAX_I2C_CLK_PORT))) {
+		cris_io_interface_free_pins(if_i2c,
+					    'b',
+					    CONFIG_ETRAX_I2C_DATA_PORT,
+					    CONFIG_ETRAX_I2C_DATA_PORT);
+		printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C clk port\n");
+	}
+#endif
 
-	return 0;
+	return res;
 }
 
 static int __init
@@ -711,14 +757,16 @@ i2c_register(void)
 {
 	int res;
 
-	i2c_init();
+	res = i2c_init();
+	if (res < 0)
+		return res;
   	res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
 	if(res < 0) {
 		printk(KERN_ERR "i2c: couldn't get a major number.\n");
 		return res;
 	}
 
-	printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n");
+	printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n");
 	
 	return 0;
 }

arch/cris/arch-v10/drivers/pcf8563.c

@@ -15,7 +15,7 @@
  *
  * Author: Tobias Anderberg <tobiasa@axis.com>.
  *
- * $Id: pcf8563.c,v 1.8 2004/08/24 06:42:51 starvik Exp $
+ * $Id: pcf8563.c,v 1.11 2005/03/07 13:13:07 starvik Exp $
  */
 
 #include <linux/config.h>
@@ -40,7 +40,7 @@
 #define PCF8563_MAJOR 121		/* Local major number. */
 #define DEVICE_NAME "rtc"		/* Name which is registered in /proc/devices. */
 #define PCF8563_NAME "PCF8563"
-#define DRIVER_VERSION "$Revision: 1.8 $"
+#define DRIVER_VERSION "$Revision: 1.11 $"
 
 /* I2C bus slave registers. */
 #define RTC_I2C_READ		0xa3
@@ -50,6 +50,8 @@
 #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
 #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
 
+static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */
+	
 static const unsigned char days_in_month[] =
 	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
 
@@ -125,9 +127,12 @@ get_rtc_time(struct rtc_time *tm)
 int __init
 pcf8563_init(void)
 {
-	unsigned char ret;
+	int ret;
 
-	i2c_init();
+	if ((ret = i2c_init())) {
+		printk(KERN_CRIT "pcf8563_init: failed to init i2c\n");
+		return ret;
+	}
 
 	/*
 	 * First of all we need to reset the chip. This is done by
@@ -200,12 +205,15 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
 			{
 				struct rtc_time tm;
 
+				spin_lock(&rtc_lock);
 				get_rtc_time(&tm);
 
 				if (copy_to_user((struct rtc_time *) arg, &tm, sizeof(struct rtc_time))) {
+					spin_unlock(&rtc_lock);
 					return -EFAULT;
 				}
 
+				spin_unlock(&rtc_lock);
 				return 0;
 			}
 			break;
@@ -251,6 +259,8 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
 				BIN_TO_BCD(tm.tm_sec);
 				tm.tm_mon |= century;
 
+				spin_lock(&rtc_lock);
+				
 				rtc_write(RTC_YEAR, tm.tm_year);
 				rtc_write(RTC_MONTH, tm.tm_mon);
 				rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
@@ -258,6 +268,8 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
 				rtc_write(RTC_MINUTES, tm.tm_min);
 				rtc_write(RTC_SECONDS, tm.tm_sec);
 
+				spin_unlock(&rtc_lock);
+
 				return 0;
 #endif /* !CONFIG_ETRAX_RTC_READONLY */
 			}

arch/cris/arch-v10/kernel/Makefile

-# $Id: Makefile,v 1.5 2004/06/02 08:24:38 starvik Exp $
+# $Id: Makefile,v 1.6 2004/12/13 12:21:51 starvik Exp $
 #
 # Makefile for the linux kernel.
 #
@@ -7,7 +7,8 @@ extra-y	:= head.o
 
 
 obj-y   := entry.o traps.o shadows.o debugport.o irq.o \
-	   process.o setup.o signal.o traps.o time.o ptrace.o
+	   process.o setup.o signal.o traps.o time.o ptrace.o \
+	   dma.o io_interface_mux.o
 
 obj-$(CONFIG_ETRAX_KGDB) += kgdb.o
 obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o

arch/cris/arch-v10/kernel/fasttimer.c

-/* $Id: fasttimer.c,v 1.6 2004/05/14 10:18:39 starvik Exp $
+/* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $
  * linux/arch/cris/kernel/fasttimer.c
  *
  * Fast timers for ETRAX100/ETRAX100LX
  * This may be useful in other OS than Linux so use 2 space indentation...
  *
  * $Log: fasttimer.c,v $
+ * Revision 1.9  2005/03/04 08:16:16  starvik
+ * Merge of Linux 2.6.11.
+ *
+ * Revision 1.8  2005/01/05 06:09:29  starvik
+ * cli()/sti() will be obsolete in 2.6.11.
+ *
+ * Revision 1.7  2005/01/03 13:35:46  starvik
+ * Removed obsolete stuff.
+ * Mark fast timer IRQ as not shared.
+ *
  * Revision 1.6  2004/05/14 10:18:39  starvik
  * Export fast_timer_list
  *
@@ -148,8 +158,7 @@ static int debug_log_cnt_wrapped = 0;
 #define DEBUG_LOG(string, value) \
 { \
   unsigned long log_flags; \
-  save_flags(log_flags); \
-  cli(); \
+  local_irq_save(log_flags); \
   debug_log_string[debug_log_cnt] = (string); \
   debug_log_value[debug_log_cnt] = (unsigned long)(value); \
   if (++debug_log_cnt >= DEBUG_LOG_MAX) \
@@ -157,7 +166,7 @@ static int debug_log_cnt_wrapped = 0;
     debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \
     debug_log_cnt_wrapped = 1; \
   } \
-  restore_flags(log_flags); \
+  local_irq_restore(log_flags); \
 }
 #else
 #define DEBUG_LOG(string, value)
@@ -320,8 +329,7 @@ void start_one_shot_timer(struct fast_timer *t,
 
   D1(printk("sft %s %d us\n", name, delay_us));
 
-  save_flags(flags);
-  cli();
+  local_irq_save(flags);
 
   do_gettimeofday_fast(&t->tv_set);
   tmp = fast_timer_list;
@@ -395,7 +403,7 @@ void start_one_shot_timer(struct fast_timer *t,
 
   D2(printk("start_one_shot_timer: %d us done\n", delay_us));
 
-  restore_flags(flags);
+  local_irq_restore(flags);
 } /* start_one_shot_timer */
 
 static inline int fast_timer_pending (const struct fast_timer * t)
@@ -425,11 +433,10 @@ int del_fast_timer(struct fast_timer * t)
   unsigned long flags;
   int ret;
   
-  save_flags(flags);
-  cli();
+  local_irq_save(flags);
   ret = detach_fast_timer(t);
   t->next = t->prev = NULL;
-  restore_flags(flags);
+  local_irq_restore(flags);
   return ret;
 } /* del_fast_timer */
 
@@ -444,8 +451,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
   struct fast_timer *t;
   unsigned long flags;
 
-  save_flags(flags);
-  cli();
+  local_irq_save(flags);
 
   /* Clear timer1 irq */
   *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr);
@@ -462,7 +468,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
   fast_timer_running = 0;
   fast_timer_ints++;
 
-  restore_flags(flags);
+  local_irq_restore(flags);
 
   t = fast_timer_list;
   while (t)
@@ -482,8 +488,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
       fast_timers_expired++;
 
       /* Remove this timer before call, since it may reuse the timer */
-      save_flags(flags);
-      cli();
+      local_irq_save(flags);
       if (t->prev)
       {
         t->prev->next = t->next;
@@ -498,7 +503,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
       }
       t->prev = NULL;
       t->next = NULL;
-      restore_flags(flags);
+      local_irq_restore(flags);
 
       if (t->function != NULL)
       {
@@ -515,8 +520,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
       D1(printk(".\n"));
     }
 
-    save_flags(flags);
-    cli();
+    local_irq_save(flags);
     if ((t = fast_timer_list) != NULL)
     {
       /* Start next timer.. */
@@ -535,7 +539,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
 #endif
           start_timer1(us);
         }
-        restore_flags(flags);
+        local_irq_restore(flags);
         break;
       }
       else
@@ -546,7 +550,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
         D1(printk("e! %d\n", us));
       }
     }
-    restore_flags(flags);
+    local_irq_restore(flags);
   }
 
   if (!t)
@@ -748,13 +752,12 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
 #endif
 
     used += sprintf(bigbuf + used, "Active timers:\n");
-    save_flags(flags);
-    cli();
+    local_irq_save(flags);
     t = fast_timer_list;
     while (t != NULL && (used+100 < BIG_BUF_SIZE))
     {
       nextt = t->next;
-      restore_flags(flags);
+      local_irq_restore(flags);
       used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
                       "d: %6li us data: 0x%08lX"
 /*                      " func: 0x%08lX" */
@@ -768,14 +771,14 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
                       t->data
 /*                      , t->function */
                       );
-      cli();
+      local_irq_disable();
       if (t->next != nextt)
       {
         printk(KERN_WARNING "timer removed!\n");
       }
       t = nextt;
     }
-    restore_flags(flags);
+    local_irq_restore(flags);
   }
 
   if (used - offset < len)
@@ -963,7 +966,7 @@ void fast_timer_init(void)
    if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 )))
      fasttimer_proc_entry->read_proc = proc_fasttimer_read;
 #endif /* PROC_FS */
-    if(request_irq(TIMER1_IRQ_NBR, timer1_handler, SA_SHIRQ,
+    if(request_irq(TIMER1_IRQ_NBR, timer1_handler, 0,
                    "fast timer int", NULL))
     {
       printk("err: timer1 irq\n");

include/asm-cris/arch-v10/ide.h

+/*
+ *  linux/include/asm-cris/ide.h
+ *
+ *  Copyright (C) 2000, 2001, 2002  Axis Communications AB
+ *
+ *  Authors:    Bjorn Wesen
+ *
+ */
+
+/*
+ *  This file contains the ETRAX 100LX specific IDE code.
+ */
+
+#ifndef __ASMCRIS_IDE_H
+#define __ASMCRIS_IDE_H
+
+#ifdef __KERNEL__
+
+#include <asm/arch/svinto.h>
+#include <asm/io.h>
+#include <asm-generic/ide_iops.h>
+
+
+/* ETRAX 100 can support 4 IDE busses on the same pins (serialized) */
+
+#define MAX_HWIFS	4
+
+extern __inline__ int ide_default_irq(unsigned long base)
+{
+	/* all IDE busses share the same IRQ, number 4.
+	 * this has the side-effect that ide-probe.c will cluster our 4 interfaces
+	 * together in a hwgroup, and will serialize accesses. this is good, because
+	 * we can't access more than one interface at the same time on ETRAX100.
+	 */
+	return 4;
+}
+
+extern __inline__ unsigned long ide_default_io_base(int index)
+{
+	/* we have no real I/O base address per interface, since all go through the
+	 * same register. but in a bitfield in that register, we have the i/f number.
+	 * so we can use the io_base to remember that bitfield.
+	 */
+	static const unsigned long io_bases[MAX_HWIFS] = {
+		IO_FIELD(R_ATA_CTRL_DATA, sel, 0),
+		IO_FIELD(R_ATA_CTRL_DATA, sel, 1),
+		IO_FIELD(R_ATA_CTRL_DATA, sel, 2),
+		IO_FIELD(R_ATA_CTRL_DATA, sel, 3)
+	};
+	return io_bases[index];
+}
+
+/* this is called once for each interface, to setup the port addresses. data_port is the result
+ * of the ide_default_io_base call above. ctrl_port will be 0, but that is don't care for us.
+ */
+
+extern __inline__ void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, unsigned long ctrl_port, int *irq)
+{
+	int i;
+
+	/* fill in ports for ATA addresses 0 to 7 */
+
+	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
+		hw->io_ports[i] = data_port |
+			IO_FIELD(R_ATA_CTRL_DATA, addr, i) |
+			IO_STATE(R_ATA_CTRL_DATA, cs0, active);
+	}
+
+	/* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
+
+	hw->io_ports[IDE_CONTROL_OFFSET] = data_port |
+			IO_FIELD(R_ATA_CTRL_DATA, addr, 6) |
+			IO_STATE(R_ATA_CTRL_DATA, cs1, active);
+
+	/* whats this for ? */
+
+	hw->io_ports[IDE_IRQ_OFFSET] = 0;
+}
+
+extern __inline__ void ide_init_default_hwifs(void)
+{
+	hw_regs_t hw;
+	int index;
+
+	for(index = 0; index < MAX_HWIFS; index++) {
+		ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, NULL);
+		hw.irq = ide_default_irq(ide_default_io_base(index));
+		ide_register_hw(&hw, NULL);
+	}
+}
+
+/* some configuration options we don't need */
+
+#undef SUPPORT_VLB_SYNC
+#define SUPPORT_VLB_SYNC 0
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMCRIS_IDE_H */

include/asm-cris/ide.h

+#include <asm/arch/ide.h>