drm/i915: Only restore backlight combination mode reg for ums

This was forgotten in

commit 565ee389
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Wed Nov 13 12:56:29 2013 +0200

    drm/i915: do not save/restore backlight registers in KMS

Since the confusion was likely due to the duplicated definition for
this pci config register, let's unify that, too.

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -73,7 +73,8 @@
 #define   I915_GC_RENDER_CLOCK_166_MHZ	(0 << 0)
 #define   I915_GC_RENDER_CLOCK_200_MHZ	(1 << 0)
 #define   I915_GC_RENDER_CLOCK_333_MHZ	(4 << 0)
-#define LBB	0xf4
+#define PCI_LBPC 0xf4 /* legacy/combination backlight modes, also called LBB */
+
 
 /* Graphics reset regs */
 #define I965_GDRST 0xc0 /* PCI config register */

drivers/gpu/drm/i915/i915_suspend.c

@@ -324,10 +324,6 @@ int i915_save_state(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int i;
 
-	if (INTEL_INFO(dev)->gen <= 4)
-		pci_read_config_byte(dev->pdev, LBB,
-				     &dev_priv->regfile.saveLBB);
-
 	mutex_lock(&dev->struct_mutex);
 
 	i915_save_display(dev);
@@ -377,10 +373,6 @@ int i915_restore_state(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int i;
 
-	if (INTEL_INFO(dev)->gen <= 4)
-		pci_write_config_byte(dev->pdev, LBB,
-				      dev_priv->regfile.saveLBB);
-
 	mutex_lock(&dev->struct_mutex);
 
 	i915_gem_restore_fences(dev);

drivers/gpu/drm/i915/i915_ums.c

@@ -271,6 +271,10 @@ void i915_save_display_reg(struct drm_device *dev)
 	/* FIXME: regfile.save TV & SDVO state */
 
 	/* Backlight */
+	if (INTEL_INFO(dev)->gen <= 4)
+		pci_read_config_byte(dev->pdev, PCI_LBPC,
+				     &dev_priv->regfile.saveLBB);
+
 	if (HAS_PCH_SPLIT(dev)) {
 		dev_priv->regfile.saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1);
 		dev_priv->regfile.saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2);
@@ -293,6 +297,10 @@ void i915_restore_display_reg(struct drm_device *dev)
 	int i;
 
 	/* Backlight */
+	if (INTEL_INFO(dev)->gen <= 4)
+		pci_write_config_byte(dev->pdev, PCI_LBPC,
+				      dev_priv->regfile.saveLBB);
+
 	if (HAS_PCH_SPLIT(dev)) {
 		I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->regfile.saveBLC_PWM_CTL);
 		I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2);

drivers/gpu/drm/i915/intel_panel.c

@@ -33,8 +33,6 @@
 #include <linux/moduleparam.h>
 #include "intel_drv.h"
 
-#define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
-
 void
 intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,
 		       struct drm_display_mode *adjusted_mode)