[POWERPC] 8xx: mpc885ads pcmcia support

Adds support for PowerQuicc on-chip PCMCIA.  The driver is implemented as
of_device, so only arch/powerpc stuff is capable to use it, which now implies
only mpc885ads reference board.

To cope with the code that should be hooked inside driver, but is really board
specific (like set_voltage), global structure mpc8xx_pcmcia_ops holds
necessary function pointers that are filled in the BSP code.

[akpm@linux-foundation.org: whitespace diddles]
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc885ads.dts

@@ -112,6 +112,17 @@ pic@ff000000 {
 			compatible = "CPM";
 		};
 
+		pcmcia@0080 {
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			compatible = "fsl,pq-pcmcia";
+			device_type = "pcmcia";
+			reg = <80 80>;
+			interrupt-parent = <ff000000>;
+			interrupts = <d 1>;
+		};
+
 		cpm@ff000000 {
 			linux,phandle = <ff000000>;
 			#address-cells = <1>;

arch/powerpc/platforms/8xx/m8xx_setup.c

@@ -32,6 +32,7 @@
 #include <linux/root_dev.h>
 #include <linux/time.h>
 #include <linux/rtc.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mmu.h>
 #include <asm/reg.h>
@@ -49,6 +50,10 @@
 
 #include "sysdev/mpc8xx_pic.h"
 
+#ifdef CONFIG_PCMCIA_M8XX
+struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
+#endif
+
 void m8xx_calibrate_decr(void);
 extern void m8xx_wdt_handler_install(bd_t *bp);
 extern int cpm_pic_init(void);

arch/powerpc/platforms/8xx/mpc885ads_setup.c

@@ -22,6 +22,7 @@
 
 #include <linux/fs_enet_pd.h>
 #include <linux/fs_uart_pd.h>
+#include <linux/fsl_devices.h>
 #include <linux/mii.h>
 
 #include <asm/delay.h>
@@ -51,6 +52,70 @@ static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi);
 static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi);
 static void init_scc3_ioports(struct fs_platform_info* ptr);
 
+#ifdef CONFIG_PCMCIA_M8XX
+static void pcmcia_hw_setup(int slot, int enable)
+{
+	unsigned *bcsr_io;
+
+	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+	if (enable)
+		clrbits32(bcsr_io, BCSR1_PCCEN);
+	else
+		setbits32(bcsr_io, BCSR1_PCCEN);
+
+	iounmap(bcsr_io);
+}
+
+static int pcmcia_set_voltage(int slot, int vcc, int vpp)
+{
+	u32 reg = 0;
+	unsigned *bcsr_io;
+
+	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+	switch(vcc) {
+	case 0:
+		break;
+	case 33:
+		reg |= BCSR1_PCCVCC0;
+		break;
+	case 50:
+		reg |= BCSR1_PCCVCC1;
+		break;
+	default:
+		return 1;
+	}
+
+	switch(vpp) {
+	case 0:
+		break;
+	case 33:
+	case 50:
+		if(vcc == vpp)
+			reg |= BCSR1_PCCVPP1;
+		else
+			return 1;
+		break;
+	case 120:
+		if ((vcc == 33) || (vcc == 50))
+			reg |= BCSR1_PCCVPP0;
+		else
+			return 1;
+	default:
+		return 1;
+	}
+
+	/* first, turn off all power */
+	clrbits32(bcsr_io, 0x00610000);
+
+	/* enable new powersettings */
+	setbits32(bcsr_io, reg);
+
+	iounmap(bcsr_io);
+	return 0;
+}
+#endif
+
 void __init mpc885ads_board_setup(void)
 {
 	cpm8xx_t *cp;
@@ -115,6 +180,12 @@ void __init mpc885ads_board_setup(void)
 	immr_unmap(io_port);
 
 #endif
+
+#ifdef CONFIG_PCMCIA_M8XX
+	/*Set up board specific hook-ups*/
+	m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
+	m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
+#endif
 }
 
 

arch/powerpc/sysdev/fsl_soc.c

@@ -1028,6 +1028,19 @@ static int __init fs_enet_of_init(void)
 
 arch_initcall(fs_enet_of_init);
 
+static int __init fsl_pcmcia_of_init(void)
+{
+	struct device_node *np = NULL;
+	/*
+	 * Register all the devices which type is "pcmcia"
+	 */
+	while ((np = of_find_compatible_node(np,
+			"pcmcia", "fsl,pq-pcmcia")) != NULL)
+			    of_platform_device_create(np, "m8xx-pcmcia", NULL);
+	return 0;
+}
+
+arch_initcall(fsl_pcmcia_of_init);
 
 static const char *smc_regs = "regs";
 static const char *smc_pram = "pram";

arch/powerpc/sysdev/mpc8xx_pic.h

@@ -4,9 +4,16 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 
-extern struct hw_interrupt_type mpc8xx_pic;
-
 int mpc8xx_pic_init(void);
 unsigned int mpc8xx_get_irq(void);
 
+/*
+ * Some internal interrupt registers use an 8-bit mask for the interrupt
+ * level instead of a number.
+ */
+static inline uint mk_int_int_mask(uint mask)
+{
+	return (1 << (7 - (mask/2)));
+}
+
 #endif /* _PPC_KERNEL_PPC8xx_H */

drivers/pcmcia/Kconfig

@@ -180,14 +180,15 @@ config TCIC
 	  PCMCIA cards are plugged into. If unsure, say N.
 
 config PCMCIA_M8XX
-        tristate "MPC8xx PCMCIA support"
-        depends on PCMCIA && PPC && 8xx 
-        select PCCARD_IODYN
-        help
-        Say Y here to include support for PowerPC 8xx series PCMCIA
-        controller.
-
-        This driver is also available as a module called m8xx_pcmcia.
+	tristate "MPC8xx PCMCIA support"
+	depends on PCMCIA && PPC && 8xx
+	select PCCARD_IODYN
+	select PCCARD_NONSTATIC
+	help
+	  Say Y here to include support for PowerPC 8xx series PCMCIA
+	  controller.
+
+	  This driver is also available as a module called m8xx_pcmcia.
 
 config HD64465_PCMCIA
 	tristate "HD64465 host bridge support"

drivers/pcmcia/m8xx_pcmcia.c

@@ -10,7 +10,7 @@
  * Further fixes, v2.6 kernel port
  *     <marcelo.tosatti@cyclades.com>
  * 
- * Some fixes, additions (C) 2005 Montavista Software, Inc. 
+ * Some fixes, additions (C) 2005-2007 Montavista Software, Inc.
  *     <vbordug@ru.mvista.com>
  *
  * "The ExCA standard specifies that socket controllers should provide
@@ -40,10 +40,6 @@
 #include <linux/fcntl.h>
 #include <linux/string.h>
 
-#include <asm/io.h>
-#include <asm/bitops.h>
-#include <asm/system.h>
-
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
@@ -51,11 +47,18 @@
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
 
+#include <asm/io.h>
+#include <asm/bitops.h>
+#include <asm/system.h>
+#include <asm/time.h>
 #include <asm/mpc8xx.h>
 #include <asm/8xx_immap.h>
 #include <asm/irq.h>
+#include <asm/fs_pd.h>
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
 
 #include <pcmcia/version.h>
 #include <pcmcia/cs_types.h>
@@ -146,27 +149,17 @@ MODULE_LICENSE("Dual MPL/GPL");
 #define PCMCIA_MEM_WIN_BASE 0xe0000000 /* base address for memory window 0   */
 #define PCMCIA_MEM_WIN_SIZE 0x04000000 /* each memory window is 64 MByte     */
 #define PCMCIA_IO_WIN_BASE  _IO_BASE   /* base address for io window 0       */
-
-#define PCMCIA_SCHLVL PCMCIA_INTERRUPT /* Status Change Interrupt Level      */
-
 /* ------------------------------------------------------------------------- */
 
-/* 2.4.x and newer has this always in HZ */
-#define M8XX_BUSFREQ ((((bd_t *)&(__res))->bi_busfreq))
-
-static int pcmcia_schlvl = PCMCIA_SCHLVL;
+static int pcmcia_schlvl;
 
 static DEFINE_SPINLOCK(events_lock);
 
-
 #define PCMCIA_SOCKET_KEY_5V 1
 #define PCMCIA_SOCKET_KEY_LV 2
 
 /* look up table for pgcrx registers */
-static u32 *m8xx_pgcrx[2] = {
-	&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pgcra,
-	&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pgcrb
-};
+static u32 *m8xx_pgcrx[2];
 
 /*
  * This structure is used to address each window in the PCMCIA controller.
@@ -228,11 +221,16 @@ struct event_table {
 	u32 eventbit;
 };
 
+static const char driver_name[] = "m8xx-pcmcia";
+
 struct socket_info {
 	void	(*handler)(void *info, u32 events);
 	void	*info;
 
 	u32 slot;
+	pcmconf8xx_t *pcmcia;
+	u32 bus_freq;
+	int hwirq;
 
 	socket_state_t state;
 	struct pccard_mem_map mem_win[PCMCIA_MEM_WIN_NO];
@@ -408,78 +406,21 @@ static void hardware_disable(int slot)
 #if defined(CONFIG_MPC885ADS)
 
 #define PCMCIA_BOARD_MSG "MPC885ADS"
+#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
 
-static int voltage_set(int slot, int vcc, int vpp)
+static inline void hardware_enable(int slot)
 {
-	u32 reg = 0;
-	unsigned *bcsr_io;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	switch(vcc) {
-		case 0:
-			break;
-		case 33:
-			reg |= BCSR1_PCCVCC0;
-			break;
-		case 50:
-			reg |= BCSR1_PCCVCC1;
-			break;
-		default:
-			goto out_unmap;
-	}
-
-	switch(vpp) {
-		case 0:
-			break;
-		case 33:
-		case 50:
-			if(vcc == vpp)
-				reg |= BCSR1_PCCVPP1;
-			else
-				goto out_unmap;
-			break;
-		case 120:
-			if ((vcc == 33) || (vcc == 50))
-				reg |= BCSR1_PCCVPP0;
-			else
-				goto out_unmap;
-		default:
-			goto out_unmap;
-	}
-
-	/* first, turn off all power */
-	out_be32(bcsr_io, in_be32(bcsr_io) & ~(BCSR1_PCCVCC_MASK | BCSR1_PCCVPP_MASK));
-
-	/* enable new powersettings */
-	out_be32(bcsr_io, in_be32(bcsr_io) | reg);
-
-	iounmap(bcsr_io);
-	return 0;
-
-out_unmap:
-	iounmap(bcsr_io);
-	return 1;
+	 m8xx_pcmcia_ops.hw_ctrl(slot, 1);
 }
 
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-
-static void hardware_enable(int slot)
+static inline void hardware_disable(int slot)
 {
-	unsigned *bcsr_io;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-	out_be32(bcsr_io, in_be32(bcsr_io) & ~BCSR1_PCCEN);
-	iounmap(bcsr_io);
+	m8xx_pcmcia_ops.hw_ctrl(slot, 0);
 }
 
-static void hardware_disable(int slot)
+static inline int voltage_set(int slot, int vcc, int vpp)
 {
-	unsigned *bcsr_io;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-	out_be32(bcsr_io, in_be32(bcsr_io) |  BCSR1_PCCEN);
-	iounmap(bcsr_io);
+	return m8xx_pcmcia_ops.voltage_set(slot, vcc, vpp);
 }
 
 #endif
@@ -604,48 +545,6 @@ static int voltage_set(int slot, int vcc, int vpp)
 
 #endif /* CONFIG_PRxK */
 
-static void m8xx_shutdown(void)
-{
-	u32 m, i;
-	struct pcmcia_win *w;
-
-	for(i = 0; i < PCMCIA_SOCKETS_NO; i++){
-		w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
-
-		out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, M8XX_PCMCIA_MASK(i));
-		out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) & ~M8XX_PCMCIA_MASK(i));
-
-		/* turn off interrupt and disable CxOE */
-		out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
-
-		/* turn off memory windows */
-		for(m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
-			out_be32(&w->or, 0); /* set to not valid */
-			w++;
-		}
-
-		/* turn off voltage */
-		voltage_set(i, 0, 0);
-
-		/* disable external hardware */
-		hardware_disable(i);
-	}
-
-	free_irq(pcmcia_schlvl, NULL);
-}
-
-static struct device_driver m8xx_driver = {
-        .name = "m8xx-pcmcia",
-        .bus = &platform_bus_type,
-        .suspend = pcmcia_socket_dev_suspend,
-        .resume = pcmcia_socket_dev_resume,
-};
-
-static struct platform_device m8xx_device = {
-        .name = "m8xx-pcmcia",
-        .id = 0,
-};
-
 static u32 pending_events[PCMCIA_SOCKETS_NO];
 static DEFINE_SPINLOCK(pending_event_lock);
 
@@ -654,13 +553,14 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
 	struct socket_info *s;
 	struct event_table *e;
 	unsigned int i, events, pscr, pipr, per;
+	pcmconf8xx_t	*pcmcia = socket[0].pcmcia;
 
 	dprintk("Interrupt!\n");
 	/* get interrupt sources */
 
-	pscr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr);
-	pipr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr);
-	per = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per);
+	pscr = in_be32(&pcmcia->pcmc_pscr);
+	pipr = in_be32(&pcmcia->pcmc_pipr);
+	per = in_be32(&pcmcia->pcmc_per);
 
 	for(i = 0; i < PCMCIA_SOCKETS_NO; i++) {
 		s = &socket[i];
@@ -724,7 +624,7 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
 			per &= ~M8XX_PCMCIA_RDY_L(0);
 			per &= ~M8XX_PCMCIA_RDY_L(1);
 
-			out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, per);
+			out_be32(&pcmcia->pcmc_per, per);
 
 			if (events)
 				pcmcia_parse_events(&socket[i].socket, events);
@@ -732,7 +632,7 @@ static irqreturn_t m8xx_interrupt(int irq, void *dev)
 	}
 
 	/* clear the interrupt sources */
-	out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, pscr);
+	out_be32(&pcmcia->pcmc_pscr, pscr);
 
 	dprintk("Interrupt done.\n");
 
@@ -753,7 +653,7 @@ static u32 m8xx_get_graycode(u32 size)
 	return k;
 }
 
-static u32 m8xx_get_speed(u32 ns, u32 is_io)
+static u32 m8xx_get_speed(u32 ns, u32 is_io, u32 bus_freq)
 {
 	u32 reg, clocks, psst, psl, psht;
 
@@ -781,7 +681,7 @@ static u32 m8xx_get_speed(u32 ns, u32 is_io)
 
 #define ADJ 180 /* 80 % longer accesstime - to be sure */
 
-	clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000;
+	clocks = ((bus_freq / 1000) * ns) / 1000;
 	clocks = (clocks * ADJ) / (100*1000);
 	if(clocks >= PCMCIA_BMT_LIMIT) {
 		printk( "Max access time limit reached\n");
@@ -806,8 +706,9 @@ static int m8xx_get_status(struct pcmcia_socket *sock, unsigned int *value)
 	int lsock = container_of(sock, struct socket_info, socket)->slot;
 	struct socket_info *s = &socket[lsock];
 	unsigned int pipr, reg;
+	pcmconf8xx_t *pcmcia = s->pcmcia;
 
-	pipr = in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr);
+	pipr = in_be32(&pcmcia->pcmc_pipr);
 
 	*value  = ((pipr & (M8XX_PCMCIA_CD1(lsock)
 			    | M8XX_PCMCIA_CD2(lsock))) == 0) ? SS_DETECT : 0;
@@ -918,6 +819,7 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 	struct event_table *e;
 	unsigned int reg;
 	unsigned long flags;
+	pcmconf8xx_t *pcmcia = socket[0].pcmcia;
 
 	dprintk( "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
 	      "io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
@@ -927,6 +829,7 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 	if(voltage_set(lsock, state->Vcc, state->Vpp))
 		return -EINVAL;
 
+
 	/* Take care of reset... */
 	if(state->flags & SS_RESET)
 		out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) |  M8XX_PGCRX_CXRESET); /* active high */
@@ -982,7 +885,8 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 		 * If io_irq is non-zero we should enable irq.
 		 */
 		if(state->io_irq) {
-			out_be32(M8XX_PGCRX(lsock), in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(state->io_irq) << 24);
+			out_be32(M8XX_PGCRX(lsock),
+				 in_be32(M8XX_PGCRX(lsock)) | mk_int_int_mask(s->hwirq) << 24);
 			/*
 			 * Strange thing here:
 			 * The manual does not tell us which interrupt
@@ -1027,7 +931,7 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 	 * Writing ones will clear the bits.
 	 */
 
-	out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr, reg);
+	out_be32(&pcmcia->pcmc_pscr, reg);
 
 	/*
 	 * Write the mask.
@@ -1036,15 +940,8 @@ static int m8xx_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
 	 * Ones will enable the interrupt.
 	 */
 
-	/*
-	  reg |= ((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per
-	  & M8XX_PCMCIA_MASK(lsock);
-	*/
-
-	reg |= in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) &
-		(M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
-
-	out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per, reg);
+	reg |= in_be32(&pcmcia->pcmc_per) & (M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
+	out_be32(&pcmcia->pcmc_per, reg);
 
 	spin_unlock_irqrestore(&events_lock, flags);
 
@@ -1062,6 +959,8 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
 	struct socket_info *s = &socket[lsock];
 	struct pcmcia_win *w;
 	unsigned int reg, winnr;
+	pcmconf8xx_t *pcmcia = s->pcmcia;
+
 
 #define M8XX_SIZE (io->stop - io->start + 1)
 #define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
@@ -1086,7 +985,7 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
 
 		/* setup registers */
 
-		w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+		w = (void *) &pcmcia->pcmc_pbr0;
 		w += winnr;
 
 		out_be32(&w->or, 0); /* turn off window first */
@@ -1095,12 +994,13 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
 		reg <<= 27;
   		reg |= M8XX_PCMCIA_POR_IO |(lsock << 2);
 
-		reg |= m8xx_get_speed(io->speed, 1);
+		reg |= m8xx_get_speed(io->speed, 1, s->bus_freq);
 
 		if(io->flags & MAP_WRPROT)
 			reg |= M8XX_PCMCIA_POR_WRPROT;
 
-		if(io->flags & (MAP_16BIT | MAP_AUTOSZ))
+		/*if(io->flags & (MAP_16BIT | MAP_AUTOSZ))*/
+		if(io->flags & MAP_16BIT)
 			reg |= M8XX_PCMCIA_POR_16BIT;
 
 		if(io->flags & MAP_ACTIVE)
@@ -1117,7 +1017,7 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io)
 
 		/* setup registers */
 
-		w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+		w = (void *) &pcmcia->pcmc_pbr0;
 		w += winnr;
 
 		out_be32(&w->or, 0); /* turn off window */
@@ -1144,6 +1044,7 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
 	struct pcmcia_win *w;
 	struct pccard_mem_map *old;
 	unsigned int reg, winnr;
+	pcmconf8xx_t *pcmcia = s->pcmcia;
 
 	dprintk( "SetMemMap(%d, %d, %#2.2x, %d ns, "
 	      "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
@@ -1166,12 +1067,12 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *m
 
 	/* Setup the window in the pcmcia controller */
 
-	w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
+	w = (void *) &pcmcia->pcmc_pbr0;
 	w += winnr;
 
 	reg |= lsock << 2;
 
-	reg |= m8xx_get_speed(mem->speed, 0);
+	reg |= m8xx_get_speed(mem->speed, 0, s->bus_freq);
 
 	if(mem->flags & MAP_ATTRIB)
 		reg |=  M8XX_PCMCIA_POR_ATTRMEM;
@@ -1236,60 +1137,69 @@ static int m8xx_sock_init(struct pcmcia_socket *sock)
 
 }
 
-static int m8xx_suspend(struct pcmcia_socket *sock)
+static int m8xx_sock_suspend(struct pcmcia_socket *sock)
 {
 	return m8xx_set_socket(sock, &dead_socket);
 }
 
 static struct pccard_operations m8xx_services = {
 	.init	= m8xx_sock_init,
-	.suspend = m8xx_suspend,
+	.suspend = m8xx_sock_suspend,
 	.get_status = m8xx_get_status,
 	.set_socket = m8xx_set_socket,
 	.set_io_map = m8xx_set_io_map,
 	.set_mem_map = m8xx_set_mem_map,
 };
 
-static int __init m8xx_init(void)
+static int __init m8xx_probe(struct of_device *ofdev, const struct of_device_id *match)
 {
 	struct pcmcia_win *w;
-	unsigned int i,m;
+	unsigned int i, m, hwirq;
+	pcmconf8xx_t *pcmcia;
+	int status;
+	struct device_node *np = ofdev->node;
 
 	pcmcia_info("%s\n", version);
 
-	if (driver_register(&m8xx_driver))
-		return -1;
+	pcmcia = of_iomap(np, 0);
+	if(pcmcia == NULL)
+		return -EINVAL;
+
+	pcmcia_schlvl = irq_of_parse_and_map(np, 0);
+	hwirq  = irq_map[pcmcia_schlvl].hwirq;
+	if (pcmcia_schlvl < 0)
+		return -EINVAL;
+
+	m8xx_pgcrx[0] = &pcmcia->pcmc_pgcra;
+	m8xx_pgcrx[1] = &pcmcia->pcmc_pgcrb;
+
 
 	pcmcia_info(PCMCIA_BOARD_MSG " using " PCMCIA_SLOT_MSG
-		    " with IRQ %u.\n", pcmcia_schlvl);
+		    " with IRQ %u  (%d). \n", pcmcia_schlvl, hwirq);
 
 	/* Configure Status change interrupt */
 
-	if(request_irq(pcmcia_schlvl, m8xx_interrupt, 0,
-			  "m8xx_pcmcia", NULL)) {
+	if(request_irq(pcmcia_schlvl, m8xx_interrupt, IRQF_SHARED,
+			  driver_name, socket)) {
 		pcmcia_error("Cannot allocate IRQ %u for SCHLVL!\n",
 			     pcmcia_schlvl);
 		return -1;
 	}
 
-	w = (void *) &((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0;
-
-	out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr,
-		M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1));
+	w = (void *) &pcmcia->pcmc_pbr0;
 
-	out_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per,
-		in_be32(&((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_per) &
-		~(M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1)));
+	out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(0)| M8XX_PCMCIA_MASK(1));
+	clrbits32(&pcmcia->pcmc_per, M8XX_PCMCIA_MASK(0) | M8XX_PCMCIA_MASK(1));
 
-/* connect interrupt and disable CxOE */
+	/* connect interrupt and disable CxOE */
 
-	out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(pcmcia_schlvl) << 16));
-	out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(pcmcia_schlvl) << 16));
+	out_be32(M8XX_PGCRX(0), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
+	out_be32(M8XX_PGCRX(1), M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
 
-/* intialize the fixed memory windows */
+	/* intialize the fixed memory windows */
 
 	for(i = 0; i < PCMCIA_SOCKETS_NO; i++){
-		for(m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
+		for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
 			out_be32(&w->br, PCMCIA_MEM_WIN_BASE +
 				(PCMCIA_MEM_WIN_SIZE
 				 * (m + i * PCMCIA_MEM_WIN_NO)));
@@ -1300,16 +1210,14 @@ static int __init m8xx_init(void)
 		}
 	}
 
-/* turn off voltage */
+	/* turn off voltage */
 	voltage_set(0, 0, 0);
 	voltage_set(1, 0, 0);
 
-/* Enable external hardware */
+	/* Enable external hardware */
 	hardware_enable(0);
 	hardware_enable(1);
 
-	platform_device_register(&m8xx_device);
-
 	for (i = 0 ; i < PCMCIA_SOCKETS_NO; i++) {
 		socket[i].slot = i;
 		socket[i].socket.owner = THIS_MODULE;
@@ -1317,30 +1225,105 @@ static int __init m8xx_init(void)
 		socket[i].socket.irq_mask = 0x000;
 		socket[i].socket.map_size = 0x1000;
 		socket[i].socket.io_offset = 0;
-		socket[i].socket.pci_irq = i  ? 7 : 9;
+		socket[i].socket.pci_irq = pcmcia_schlvl;
 		socket[i].socket.ops = &m8xx_services;
-		socket[i].socket.resource_ops = &pccard_iodyn_ops;
+		socket[i].socket.resource_ops = &pccard_nonstatic_ops;
 		socket[i].socket.cb_dev = NULL;
-		socket[i].socket.dev.parent = &m8xx_device.dev;
+		socket[i].socket.dev.parent = &ofdev->dev;
+		socket[i].pcmcia = pcmcia;
+		socket[i].bus_freq = ppc_proc_freq;
+		socket[i].hwirq = hwirq;
+
+
 	}
 
-	for (i = 0; i < PCMCIA_SOCKETS_NO; i++)
-		pcmcia_register_socket(&socket[i].socket);
+	for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
+		status = pcmcia_register_socket(&socket[i].socket);
+		if (status < 0)
+			pcmcia_error("Socket register failed\n");
+	}
 
 	return 0;
 }
 
-static void __exit m8xx_exit(void)
+static int m8xx_remove(struct of_device* ofdev)
 {
-	int i;
+	u32 m, i;
+	struct pcmcia_win *w;
+	pcmconf8xx_t *pcmcia = socket[0].pcmcia;
+
+	for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
+		w = (void *) &pcmcia->pcmc_pbr0;
+
+		out_be32(&pcmcia->pcmc_pscr, M8XX_PCMCIA_MASK(i));
+		out_be32(&pcmcia->pcmc_per,
+			in_be32(&pcmcia->pcmc_per) & ~M8XX_PCMCIA_MASK(i));
 
+		/* turn off interrupt and disable CxOE */
+		out_be32(M8XX_PGCRX(i), M8XX_PGCRX_CXOE);
+
+		/* turn off memory windows */
+		for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
+			out_be32(&w->or, 0); /* set to not valid */
+			w++;
+		}
+
+		/* turn off voltage */
+		voltage_set(i, 0, 0);
+
+		/* disable external hardware */
+		hardware_disable(i);
+	}
 	for (i = 0; i < PCMCIA_SOCKETS_NO; i++)
 		pcmcia_unregister_socket(&socket[i].socket);
 
-	m8xx_shutdown();
+	free_irq(pcmcia_schlvl, NULL);
 
-	platform_device_unregister(&m8xx_device);
-	driver_unregister(&m8xx_driver);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int m8xx_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	return pcmcia_socket_dev_suspend(&pdev->dev, state);
+}
+
+static int m8xx_resume(struct platform_device *pdev)
+{
+	return pcmcia_socket_dev_resume(&pdev->dev);
+}
+#else
+#define m8xx_suspend NULL
+#define m8xx_resume NULL
+#endif
+
+static struct of_device_id m8xx_pcmcia_match[] = {
+	{
+		.type = "pcmcia",
+		.compatible = "fsl,pq-pcmcia",
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, m8xx_pcmcia_match);
+
+static struct of_platform_driver m8xx_pcmcia_driver = {
+	.name		= (char *) driver_name,
+	.match_table	= m8xx_pcmcia_match,
+	.probe		= m8xx_probe,
+	.remove		= m8xx_remove,
+	.suspend	= m8xx_suspend,
+	.resume		= m8xx_resume,
+};
+
+static int __init m8xx_init(void)
+{
+	return of_register_platform_driver(&m8xx_pcmcia_driver);
+}
+
+static void __exit m8xx_exit(void)
+{
+	of_unregister_platform_driver(&m8xx_pcmcia_driver);
 }
 
 module_init(m8xx_init);

include/asm-powerpc/mpc8xx.h

@@ -23,6 +23,10 @@
 #include <platforms/8xx/mpc885ads.h>
 #endif
 
+#ifdef CONFIG_PCMCIA_M8XX
+extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
+#endif
+
 #endif /* CONFIG_8xx */
 #endif /* __CONFIG_8xx_DEFS */
 #endif /* __KERNEL__ */

include/linux/fsl_devices.h

@@ -120,5 +120,10 @@ struct fsl_spi_platform_data {
 	u32	sysclk;
 };
 
+struct mpc8xx_pcmcia_ops {
+	void(*hw_ctrl)(int slot, int enable);
+	int(*voltage_set)(int slot, int vcc, int vpp);
+};
+
 #endif /* _FSL_DEVICE_H_ */
 #endif /* __KERNEL__ */