RealView: Move the timer definitions into the EB specific files

This patch moves the timer definitions from platform.h into board-eb.h
as they are different on PB11MPCore and PB1176. It also adds
timerX_va_base variables in core.c which are set by the
realview_eb_timer_init function before invoking realview_timer_init.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arch/arm/mach-realview/core.c

@@ -444,10 +444,10 @@ void realview_leds_event(led_event_t ledevt)
 /*
  * Where is the timer (VA)?
  */
-#define TIMER0_VA_BASE		 __io_address(REALVIEW_TIMER0_1_BASE)
-#define TIMER1_VA_BASE		(__io_address(REALVIEW_TIMER0_1_BASE) + 0x20)
-#define TIMER2_VA_BASE		 __io_address(REALVIEW_TIMER2_3_BASE)
-#define TIMER3_VA_BASE		(__io_address(REALVIEW_TIMER2_3_BASE) + 0x20)
+void __iomem *timer0_va_base;
+void __iomem *timer1_va_base;
+void __iomem *timer2_va_base;
+void __iomem *timer3_va_base;
 
 /*
  * How long is the timer interval?
@@ -474,7 +474,7 @@ static void timer_set_mode(enum clock_event_mode mode,
 
 	switch(mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+		writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD);
 
 		ctrl = TIMER_CTRL_PERIODIC;
 		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
@@ -490,16 +490,16 @@ static void timer_set_mode(enum clock_event_mode mode,
 		ctrl = 0;
 	}
 
-	writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(ctrl, timer0_va_base + TIMER_CTRL);
 }
 
 static int timer_set_next_event(unsigned long evt,
 				struct clock_event_device *unused)
 {
-	unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+	unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL);
 
-	writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(evt, timer0_va_base + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL);
 
 	return 0;
 }
@@ -535,7 +535,7 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &timer0_clockevent;
 
 	/* clear the interrupt */
-	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+	writel(1, timer0_va_base + TIMER_INTCLR);
 
 	evt->event_handler(evt);
 
@@ -550,7 +550,7 @@ static struct irqaction realview_timer_irq = {
 
 static cycle_t realview_get_cycles(void)
 {
-	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+	return ~readl(timer3_va_base + TIMER_VALUE);
 }
 
 static struct clocksource clocksource_realview = {
@@ -565,11 +565,11 @@ static struct clocksource clocksource_realview = {
 static void __init realview_clocksource_init(void)
 {
 	/* setup timer 0 as free-running clocksource */
-	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
-	writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
-	writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+	writel(0, timer3_va_base + TIMER_CTRL);
+	writel(0xffffffff, timer3_va_base + TIMER_LOAD);
+	writel(0xffffffff, timer3_va_base + TIMER_VALUE);
 	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		TIMER3_VA_BASE + TIMER_CTRL);
+		timer3_va_base + TIMER_CTRL);
 
 	clocksource_realview.mult =
 		clocksource_khz2mult(1000, clocksource_realview.shift);
@@ -606,10 +606,10 @@ void __init realview_timer_init(unsigned int timer_irq)
 	/*
 	 * Initialise to a known state (all timers off)
 	 */
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+	writel(0, timer0_va_base + TIMER_CTRL);
+	writel(0, timer1_va_base + TIMER_CTRL);
+	writel(0, timer2_va_base + TIMER_CTRL);
+	writel(0, timer3_va_base + TIMER_CTRL);
 
 	/* 
 	 * Make irqs happen for the system timer

arch/arm/mach-realview/core.h

@@ -55,6 +55,10 @@ extern void __iomem *gic_cpu_base_addr;
 extern void __iomem *twd_base_addr;
 extern unsigned int twd_size;
 #endif
+extern void __iomem *timer0_va_base;
+extern void __iomem *timer1_va_base;
+extern void __iomem *timer2_va_base;
+extern void __iomem *timer3_va_base;
 
 extern void realview_leds_event(led_event_t ledevt);
 extern void realview_timer_init(unsigned int timer_irq);

arch/arm/mach-realview/realview_eb.c

@@ -66,13 +66,13 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TIMER0_1_BASE),
+		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TIMER2_3_BASE),
+		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	},
@@ -337,6 +337,11 @@ static void __init realview_eb_timer_init(void)
 {
 	unsigned int timer_irq;
 
+	timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE);
+	timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20;
+	timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
+	timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
+
 	if (core_tile_eb11mp()) {
 #ifdef CONFIG_LOCAL_TIMERS
 		twd_base_addr = __io_address(REALVIEW_EB11MP_TWD_BASE);

include/asm-arm/arch-realview/board-eb.h

@@ -26,6 +26,8 @@
 /*
  * RealView EB + ARM11MPCore peripheral addresses
  */
+#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
 #define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
 #define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
 

include/asm-arm/arch-realview/platform.h

@@ -190,8 +190,6 @@
 #define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
 	/* Reserved 0x1000F000 */
 #define REALVIEW_WATCHDOG_BASE        0x10010000	/* watchdog interface */
-#define REALVIEW_TIMER0_1_BASE        0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_TIMER2_3_BASE        0x10012000	/* Timer 2 and 3 */
 #define REALVIEW_GPIO0_BASE           0x10013000	/* GPIO port 0 */
 #define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
 #define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */