Skip to content

L
linux
Commit 80dbb53d authored by Paul Mackerras's avatar Paul Mackerras Committed by Paul Mackerras
Browse files
Options

PPC32: Update the support for the IBM 40x embedded PowerPC chips and boards. 

Some of this comes from recent work in the 2_4_devel tree, including the
conversion to using an array (core_ocp[]) to describe on-chip peripherals
in a standard format.  The other major change is to give the board file
control early on in the boot and let it call back to generic 4xx routines
rather than vice-versa.
parent 423a9d4f
Show whitespace changes
Inline Side-by-side
Showing with 1399 additions and 885 deletions
arch/ppc/platforms/4xx/ash.c
View file @ 80dbb53d
/*
*
* Copyright 2001 MontaVista Software Inc.
* Copyright 2001-2002 MontaVista Software Inc.
* <akuster@mvista.com>
* IBM NP405H ash eval board
*
*/
#include <linux/config.h>
#include <linux/init.h>
......@@ -13,9 +12,12 @@
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/io.h>
#ifdef CONFIG_PPC_RTC
#include <asm/todc.h>
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
void *ash_rtc_base;
......@@ -32,72 +34,206 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
* A B C D
*/
{
{28, 28, 28, 28}, /* IDSEL 1 - PCI slot 1 */
{29, 29, 29, 29}, /* IDSEL 2 - PCI slot 2 */
{30, 30, 30, 30}, /* IDSEL 3 - PCI slot 3 */
{31, 31, 31, 31}, /* IDSEL 4 - PCI slot 4 */
{24, 24, 24, 24}, /* IDSEL 1 - PCI slot 1 */
{25, 25, 25, 25}, /* IDSEL 2 - PCI slot 2 */
{26, 26, 26, 26}, /* IDSEL 3 - PCI slot 3 */
{27, 27, 27, 27}, /* IDSEL 4 - PCI slot 4 */
};
const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
};
}
void __init
board_setup_arch(void)
ash_setup_arch(void)
{
bd_t *bip = &__res;
bd_t *bip = (bd_t *)__res;
ppc4xx_setup_arch();
#ifdef CONFIG_PPC_RTC
/* RTC step for the walnut */
ash_rtc_base = (void *) ASH_RTC_VADDR;
TODC_INIT(TODC_TYPE_DS1743, ash_rtc_base, ash_rtc_base,ash_rtc_base, 8);
#endif /* CONFIG_PPC_RTC */
#define CONFIG_DEBUG_BRINGUP
#ifdef CONFIG_DEBUG_BRINGUP
int i;
printk("\n");
printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
printk("\n");
printk("bi_s_version\t %s\n", bip->bi_s_version);
printk("bi_r_version\t %s\n", bip->bi_r_version);
printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,bip->bi_memsize/(1024*1000));
printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
bip->bi_enetaddr[0][0], bip->bi_enetaddr[0][1],
bip->bi_enetaddr[0][2], bip->bi_enetaddr[0][3],
bip->bi_enetaddr[0][4], bip->bi_enetaddr[0][5]);
printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 1,
bip->bi_enetaddr[1][0], bip->bi_enetaddr[1][1],
bip->bi_enetaddr[1][2], bip->bi_enetaddr[1][3],
bip->bi_enetaddr[1][4], bip->bi_enetaddr[1][5]);
printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,
bip->bi_memsize / (1024 * 1000));
for (i = 0; i < EMAC_NUMS; i++) {
printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", i,
bip->bi_enetaddr[i][0], bip->bi_enetaddr[i][1],
bip->bi_enetaddr[i][2], bip->bi_enetaddr[i][3],
bip->bi_enetaddr[i][4], bip->bi_enetaddr[i][5]);
}
printk("bi_pci_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
bip->bi_pci_enetaddr[0], bip->bi_pci_enetaddr[1],
bip->bi_pci_enetaddr[2], bip->bi_pci_enetaddr[3],
bip->bi_pci_enetaddr[4], bip->bi_pci_enetaddr[5]);
printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
bip->bi_intfreq, bip->bi_intfreq/ 1000000);
bip->bi_intfreq, bip->bi_intfreq / 1000000);
printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
bip->bi_busfreq, bip->bi_busfreq / 1000000 );
bip->bi_busfreq, bip->bi_busfreq / 1000000);
printk("bi_pci_busfreq\t 0x%8.8x\t pci bus clock:\t %dMHz\n",
bip->bi_pci_busfreq, bip->bi_pci_busfreq/1000000);
bip->bi_pci_busfreq, bip->bi_pci_busfreq / 1000000);
printk("\n");
#endif
/* RTC step for ash */
ash_rtc_base = (void *) ASH_RTC_VADDR;
TODC_INIT(TODC_TYPE_DS1743, ash_rtc_base, ash_rtc_base, ash_rtc_base,
8);
}
void __init
board_io_mapping(void)
bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
{
io_block_mapping(ASH_RTC_VADDR,
ASH_RTC_PADDR, ASH_RTC_SIZE, _PAGE_IO);
unsigned int bar_response, bar;
/*
* Expected PCI mapping:
*
* PLB addr PCI memory addr
* --------------------- ---------------------
* 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
* 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
*
* PLB addr PCI io addr
* --------------------- ---------------------
* e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
*
* The following code is simplified by assuming that the bootrom
* has been well behaved in following this mapping.
*/
#ifdef DEBUG
int i;
printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
printk("PCI bridge regs before fixup \n");
for (i = 0; i <= 2; i++) {
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
printk(" pmm%dpcila\t0x%x\n", i,
in_le32(&(pcip->pmm[i].pcila)));
printk(" pmm%dpciha\t0x%x\n", i,
in_le32(&(pcip->pmm[i].pciha)));
}
printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
early_read_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
&bar_response);
DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
hose->first_busno, PCI_SLOT(hose->first_busno),
PCI_FUNC(hose->first_busno), bar, bar_response);
}
#endif
if (ppc_md.progress)
ppc_md.progress("bios_fixup(): enter", 0x800);
/* added for IBM boot rom version 1.15 bios bar changes -AK */
/* Disable region first */
out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
/* PLB starting addr, PCI: 0x80000000 */
out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
/* PCI start addr, 0x80000000 */
out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
/* 512MB range of PLB to PCI */
out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
/* Enable no pre-fetch, enable region */
out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
(PPC405_PCI_UPPER_MEM -
PPC405_PCI_MEM_BASE)) | 0x01));
/* Disable region one */
out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
/* Disable region two */
out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
/* Enable PTM1 and PTM2, mapped to PLB address 0. */
out_le32((void *) &(pcip->ptm1la), 0x00000000);
out_le32((void *) &(pcip->ptm1ms), 0x00000001);
out_le32((void *) &(pcip->ptm2la), 0x00000000);
out_le32((void *) &(pcip->ptm2ms), 0x00000001);
/* Write zero to PTM1 BAR. */
early_write_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno),
PCI_BASE_ADDRESS_1,
0x00000000);
/* Disable PTM2 (unused) */
out_le32((void *) &(pcip->ptm2la), 0x00000000);
out_le32((void *) &(pcip->ptm2ms), 0x00000000);
/* end work arround */
if (ppc_md.progress)
ppc_md.progress("bios_fixup(): done", 0x800);
#ifdef DEBUG
printk("PCI bridge regs after fixup \n");
for (i = 0; i <= 2; i++) {
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
printk(" pmm%dpcila\t0x%x\n", i,
in_le32(&(pcip->pmm[i].pcila)));
printk(" pmm%dpciha\t0x%x\n", i,
in_le32(&(pcip->pmm[i].pciha)));
}
printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
early_read_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
&bar_response);
DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
hose->first_busno, PCI_SLOT(hose->first_busno),
PCI_FUNC(hose->first_busno), bar, bar_response);
}
#endif
}
void __init
board_setup_irq(void)
ash_map_io(void)
{
ppc4xx_map_io();
io_block_mapping(ASH_RTC_VADDR, ASH_RTC_PADDR, ASH_RTC_SIZE, _PAGE_IO);
}
void __init
board_init(void)
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
ppc4xx_init(r3, r4, r5, r6, r7);
ppc_md.setup_arch = ash_setup_arch;
ppc_md.setup_io_mappings = ash_map_io;
#ifdef CONFIG_PPC_RTC
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
......
arch/ppc/platforms/4xx/ash.h
View file @ 80dbb53d
/*
*
*
* Copyright 2000 MontaVista Software Inc.
* Copyright 2000-2002 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* akuster@mvista.com or source@mvista.com
*
......@@ -17,7 +17,7 @@
#ifdef __KERNEL__
#ifndef __ASM_ASH_H__
#define __ASM_ASH_H__
#include <platforms/4xx/ibm_ocp.h>
#include <asm/ibm_ocp.h>
#include <platforms/4xx/ibmnp405h.h>
#ifndef __ASSEMBLY__
......@@ -32,7 +32,7 @@ typedef struct board_info {
unsigned char bi_s_version[4]; /* Version of this structure */
unsigned char bi_r_version[30]; /* Version of the IBM ROM */
unsigned int bi_memsize; /* DRAM installed, in bytes */
unsigned char bi_enetaddr[EMAC_NUMS][6]; /* Local Ethernet MAC address */
unsigned char bi_enetaddr[4][6]; /* Local Ethernet MAC address */
unsigned char bi_pci_enetaddr[6];
unsigned int bi_intfreq; /* Processor speed, in Hz */
unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
......@@ -76,7 +76,7 @@ extern void *ash_rtc_base;
#define BASE_BAUD 691200
#endif
#define PPC4xx_MACHINE_NAME "IBM NP405H Ceder"
#define PPC4xx_MACHINE_NAME "IBM NP405H Ash"
extern char pci_irq_table[][4];
......
arch/ppc/platforms/4xx/cedar.c
View file @ 80dbb53d
......@@ -11,32 +11,28 @@
#include <asm/machdep.h>
#include <asm/io.h>
#ifdef CONFIG_PPC_RTC
#include <asm/todc.h>
#endif
void *ceder_rtc_base;
void *cedar_rtc_base;
void __init
board_setup_arch(void)
cedar_setup_arch(void)
{
bd_t *bip = &__res;
bd_t *bip = (bd_t *)__res;
#ifdef CONFIG_PPC_RTC
/* RTC step for the walnut */
ceder_rtc_base = (void *) CEDER_RTC_VADDR;
TODC_INIT(TODC_TYPE_DS1743, ceder_rtc_base, ceder_rtc_base,ceder_rtc_base, 8);
#endif /* CONFIG_PPC_RTC */
#define CONFIG_DEBUG_BRINGUP
cedar_rtc_base = (void *) CEDAR_RTC_VADDR;
TODC_INIT(TODC_TYPE_DS1743, cedar_rtc_base, cedar_rtc_base,
cedar_rtc_base, 8);
#ifdef CONFIG_DEBUG_BRINGUP
printk("\n");
printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
printk("\n");
printk("bi_s_version\t %s\n", bip->bi_s_version);
printk("bi_r_version\t %s\n", bip->bi_r_version);
printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,bip->bi_memsize/(1024*1000));
printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,
bip->bi_memsize / (1024 * 1000));
printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
bip->bi_enetaddr[0][0], bip->bi_enetaddr[0][1],
bip->bi_enetaddr[0][2], bip->bi_enetaddr[0][3],
......@@ -48,36 +44,42 @@ board_setup_arch(void)
bip->bi_enetaddr[1][4], bip->bi_enetaddr[1][5]);
printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
bip->bi_intfreq, bip->bi_intfreq/ 1000000);
bip->bi_intfreq, bip->bi_intfreq / 1000000);
printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
bip->bi_busfreq, bip->bi_busfreq / 1000000 );
bip->bi_busfreq, bip->bi_busfreq / 1000000);
printk("bi_pci_busfreq\t 0x%8.8x\t pci bus clock:\t %dMHz\n",
bip->bi_pci_busfreq, bip->bi_pci_busfreq/1000000);
bip->bi_pci_busfreq, bip->bi_pci_busfreq / 1000000);
printk("\n");
#endif
}
void __init
board_io_mapping(void)
{
io_block_mapping(CEDER_RTC_VADDR,
CEDER_RTC_PADDR, CEDER_RTC_SIZE, _PAGE_IO);
/* Identify the system */
printk
("IBM Cedar port (C) 2002 MontaVista Software, Inc. (source@mvista.com)\n");
}
void __init
board_setup_irq(void)
cedar_map_io(void)
{
ppc4xx_map_io();
io_block_mapping(CEDAR_RTC_VADDR,
CEDAR_RTC_PADDR, CEDAR_RTC_SIZE, _PAGE_IO);
}
void __init
board_init(void)
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
#ifdef CONFIG_PPC_RTC
ppc4xx_init(r3, r4, r5, r6, r7);
ppc_md.setup_arch = cedar_setup_arch;
ppc_md.setup_io_mappings = cedar_map_io;
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
#endif
}
arch/ppc/platforms/4xx/cedar.h
View file @ 80dbb53d
......@@ -5,24 +5,24 @@
* Author: MontaVista Software, Inc.
* akuster@mvista.com or source@mvista.com
*
* Module name: ceder.h
* Module name: cedar.h
*
* Description:
* Macros, definitions, and data structures specific to the IBM PowerPC
* Ceder eval board.
* Cedar eval board.
*
*
*/
#ifdef __KERNEL__
#ifndef __ASM_CEDER_H__
#define __ASM_CEDER_H__
#ifndef __ASM_CEDAR_H__
#define __ASM_CEDAR_H__
#include <platforms/4xx/ibmnp405l.h>
#ifndef __ASSEMBLY__
/*
* Data structure defining board information maintained by the boot
* ROM on IBM's "Ceder" evaluation board. An effort has been made to
* ROM on IBM's "Cedar" evaluation board. An effort has been made to
* keep the field names consistent with the 8xx 'bd_t' board info
* structures.
*/
......@@ -31,7 +31,7 @@ typedef struct board_info {
unsigned char bi_s_version[4]; /* Version of this structure */
unsigned char bi_r_version[30]; /* Version of the IBM ROM */
unsigned int bi_memsize; /* DRAM installed, in bytes */
unsigned char bi_enetaddr[EMAC_NUMS][6]; /* Local Ethernet MAC address */
unsigned char bi_enetaddr[2][6]; /* Local Ethernet MAC address */
unsigned char bi_pci_mac[6];
unsigned int bi_intfreq; /* Processor speed, in Hz */
unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
......@@ -42,32 +42,22 @@ typedef struct board_info {
*/
#define bi_tbfreq bi_intfreq
/* Memory map for the IBM "Ceder" NP405 evaluation board.
/* Memory map for the IBM "Cedar" NP405 evaluation board.
*/
extern void *ceder_rtc_base;
#define CEDER_RTC_PADDR ((uint)0xf0000000)
#define CEDER_RTC_VADDR CEDER_RTC_PADDR
#define CEDER_RTC_SIZE ((uint)8*1024)
extern void *cedar_rtc_base;
#define CEDAR_RTC_PADDR ((uint)0xf0000000)
#define CEDAR_RTC_VADDR CEDAR_RTC_PADDR
#define CEDAR_RTC_SIZE ((uint)8*1024)
/* Early initialization address mapping for block_io.
* Standard 405GP map.
*/
#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE)
#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR
#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR)
#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR
#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000)
#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR
#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000)
#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
#define NR_BOARD_IRQS 32
#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
#define BASE_BAUD 201600
......@@ -75,11 +65,11 @@ extern void *ceder_rtc_base;
#define BASE_BAUD 691200
#endif
#define PPC4xx_MACHINE_NAME "IBM NP405L Ceder"
#define PPC4xx_MACHINE_NAME "IBM NP405L Cedar"
extern char pci_irq_table[][4];
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_CEDER_H__ */
#endif /* __ASM_CEDAR_H__ */
#endif /* __KERNEL__ */
arch/ppc/platforms/4xx/cpci405.c
View file @ 80dbb53d
......@@ -13,9 +13,6 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* History: 11/09/2001 - armin
* added board_init to add in additional instuctions needed during platfrom_init
*
*/
#include <linux/config.h>
......@@ -26,6 +23,8 @@
#include <asm/machdep.h>
#include <asm/todc.h>
void *cpci405_nvram;
/*
* Some IRQs unique to CPCI-405.
*/
......@@ -51,28 +50,31 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
};
void __init
board_setup_arch(void)
cpci405_setup_arch(void)
{
ppc4xx_setup_arch();
TODC_INIT(TODC_TYPE_MK48T35, cpci405_nvram, cpci405_nvram, cpci405_nvram, 8);
}
void __init
board_io_mapping(void)
cpci405_map_io(void)
{
ppc4xx_map_io();
cpci405_nvram = ioremap(CPCI405_NVRAM_PADDR, CPCI405_NVRAM_SIZE);
}
void __init
board_setup_irq(void)
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
}
ppc4xx_init(r3, r4, r5, r6, r7);
ppc_md.setup_arch = cpci405_setup_arch;
ppc_md.setup_io_mappings = cpci405_map_io;
void __init
board_init(void)
{
#ifdef CONFIG_PPC_RTC
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
#endif
}
arch/ppc/platforms/4xx/cpci405.h
View file @ 80dbb53d
......@@ -4,35 +4,25 @@
* Copyright (c) 2001 Stefan Roese (stefan.roese@esd-electronics.com)
*/
#ifdef __KERNEL__
#ifndef __ASM_CPCI405_H__
#define __ASM_CPCI405_H__
#include <linux/config.h>
/* We have a 405GP core */
#include <platforms/ibm405gp.h>
#include <platforms/4xx/ibm405gp.h>
#include <asm/ppcboot.h>
#ifndef __ASSEMBLY__
/* Some 4xx parts use a different timebase frequency from the internal clock.
*/
#define bi_tbfreq bi_intfreq
/* Early initialization address mapping for block_io.
* Standard 405GP map.
*/
#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE)
#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR
#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR)
#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR
#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000)
#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR
#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000)
#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
/* Map for the NVRAM space */
#define CPCI405_NVRAM_PADDR ((uint)0xf0200000)
#define CPCI405_NVRAM_SIZE ((uint)32*1024)
#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
#define BASE_BAUD 201600
......@@ -42,4 +32,6 @@
#define PPC4xx_MACHINE_NAME "esd CPCI-405"
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_CPCI405_H__ */
#endif /* __KERNEL__ */
arch/ppc/platforms/4xx/ep405.c
View file @ 80dbb53d
......@@ -2,7 +2,7 @@
* Copyright 2001 MontaVista Software Inc.
* <mlocke@mvista.com>
*
* Not much is needed for the Embedded Planet 405gp board
* Not much needed for the Embedded Planet 405gp board
*
*/
#include <linux/config.h>
......@@ -12,7 +12,7 @@
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/todc.h>
#include <platforms/4xx/ibm_ocp.h>
#include <asm/ibm_ocp_pci.h>
#undef DEBUG
#ifdef DEBUG
......@@ -33,7 +33,6 @@ static struct {
{0x07, 0x0E, 25}, /* EP405PC: USB */
#endif
};
#define EP405_DEVTABLE_SIZE (sizeof(ep405_devtable)/sizeof(ep405_devtable[0]))
int __init
ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
......@@ -42,7 +41,7 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
/* AFAICT this is only called a few times during PCI setup, so
performance is not critical */
for (i = 0; i < EP405_DEVTABLE_SIZE; i++) {
for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) {
if (idsel == ep405_devtable[i].pci_idsel)
return ep405_devtable[i].irq;
}
......@@ -50,11 +49,11 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
};
void __init
board_setup_arch(void)
ep405_setup_arch(void)
{
bd_t *bip = (bd_t *) __res;
ppc4xx_setup_arch();
if (bip->bi_nvramsize == 512*1024) {
if (__res.bi_nvramsize == 512*1024) {
/* FIXME: we should properly handle NVRTCs of different sizes */
TODC_INIT(TODC_TYPE_DS1557, ep405_nvram, ep405_nvram, ep405_nvram, 8);
}
......@@ -128,9 +127,11 @@ bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
}
void __init
board_io_mapping(void)
ep405_map_io(void)
{
bd_t *bip = (bd_t *) __res;
bd_t *bip = &__res;
ppc4xx_map_io();
ep405_bcsr = ioremap(EP405_BCSR_PADDR, EP405_BCSR_SIZE);
......@@ -140,10 +141,12 @@ board_io_mapping(void)
}
void __init
board_setup_irq(void)
ep405_init_IRQ(void)
{
int i;
ppc4xx_init_IRQ();
/* Workaround for a bug in the firmware it incorrectly sets
the IRQ polarities for XIRQ0 and XIRQ1 */
mtdcr(DCRN_UIC_PR(DCRN_UIC0_BASE), 0xffffff80); /* set the polarity */
......@@ -153,7 +156,7 @@ board_setup_irq(void)
writeb(0xf0, ep405_bcsr+10);
/* Set up IRQ routing */
for (i = 0; i < EP405_DEVTABLE_SIZE; i++) {
for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) {
if ( (ep405_devtable[i].irq >= 25)
&& (ep405_devtable[i].irq) <= 31) {
writeb(ep405_devtable[i].cpld_xirq_select, ep405_bcsr+5);
......@@ -163,22 +166,23 @@ board_setup_irq(void)
}
void __init
board_init(void)
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
#ifdef CONFIG_PPC_RTC
bd_t *bip = (bd_t *) __res;
ppc4xx_init(r3, r4, r5, r6, r7);
ppc_md.setup_arch = ep405_setup_arch;
ppc_md.setup_io_mappings = ep405_map_io;
ppc_md.init_IRQ = ep405_init_IRQ;
/* FIXME: we should be able to access the NVRAM even if PPC_RTC is not configured */
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
if (bip->bi_nvramsize == 512*1024) {
if (__res.bi_nvramsize == 512*1024) {
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
} else {
printk("EP405: NVRTC size is not 512k (not a DS1557). Not sure what to do with it\n");
}
#endif
}
arch/ppc/platforms/4xx/ep405.h
View file @ 80dbb53d
......@@ -16,6 +16,9 @@
#include <platforms/4xx/ibm405gp.h>
#ifndef __ASSEMBLY__
#include <linux/types.h>
typedef struct board_info {
unsigned int bi_memsize; /* DRAM installed, in bytes */
unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */
......
arch/ppc/platforms/4xx/ibm405gp.c
View file @ 80dbb53d
......@@ -28,36 +28,20 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* History: 12/26/2001 - armin
* initial release
*
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/threads.h>
#include <linux/param.h>
#include <linux/string.h>
#include <asm/ocp.h>
#include <platforms/4xx/ibm405gp.h>
const struct pcil0_regs *PCIL_ADDR[] = {
(struct pcil0_regs *) PCIL0_BASE,
};
const struct NS16550 *COM_PORTS[] = {
(struct NS16550 *) UART0_IO_BASE,
(struct NS16550 *) UART1_IO_BASE,
};
struct iic_regs *IIC_ADDR[] = {
(struct iic_regs *) IIC0_BASE,
};
const struct gpio_regs *GPIO_ADDR[] = {
(struct gpio_regs *) GPIO0_BASE,
};
struct ocp_def core_ocp[] __initdata = {
{OCP_VENDOR_IBM, OCP_FUNC_OPB, OPB_BASE_START, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_16550, UART0_IO_BASE, UART0_INT,IBM_CPM_UART0},
{OCP_VENDOR_IBM, OCP_FUNC_16550, UART1_IO_BASE, UART1_INT, IBM_CPM_UART1},
{OCP_VENDOR_IBM, OCP_FUNC_IIC, IIC0_BASE, IIC0_IRQ, IBM_CPM_IIC0},
{OCP_VENDOR_IBM, OCP_FUNC_GPIO, GPIO0_BASE, OCP_IRQ_NA, IBM_CPM_GPIO0},
{OCP_VENDOR_IBM, OCP_FUNC_EMAC, EMAC0_BASE, BL_MAC_ETH0, IBM_CPM_EMAC0},
{OCP_VENDOR_INVALID, OCP_FUNC_INVALID, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
const struct emac_regs *EMAC_ADDR[] = {
(struct emac_regs *) EMAC0_BASE,
};
arch/ppc/platforms/4xx/ibm405gp.h
View file @ 80dbb53d
......@@ -30,19 +30,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Version 1.0 (01/10/10) - A. Kuster
* Initial version - moved 40GP specific out of ppc4xx.h
* - moved emac reg from ppc405_enet.h
*
* Version 1.1 02/01/17 - A. Kuster
* Moved offsets to ibm405.h
*
* Version 1.2 05/01/02 - Armin
* added IIC_PORT_DFNS
*
* Version 1.3 - armin
* removed iic & uart num defines
* and IIC_PORT_DFNS
*/
#ifdef __KERNEL__
......@@ -50,7 +37,6 @@
#define __ASM_IBM405GP_H__
#include <linux/config.h>
#include <platforms/4xx/ibm_ocp.h>
/* ibm405.h at bottom of this file */
......@@ -88,6 +74,9 @@
#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
#define OPB_BASE_START 0x40000000
#define EBIU_BASE_START 0xF0100000
/* serial port defines */
#define RS_TABLE_SIZE 2
......@@ -101,6 +90,13 @@
#define OPB0_BASE 0xEF600600
#define GPIO0_BASE 0xEF600700
#define EMAC0_BASE 0xEF600800
#define BL_MAC_WOL 9 /* WOL */
#define BL_MAL_SERR 10 /* MAL SERR */
#define BL_MAL_TXDE 13 /* MAL TXDE */
#define BL_MAL_RXDE 14 /* MAL RXDE */
#define BL_MAL_TXEOB 11 /* MAL TX EOB */
#define BL_MAL_RXEOB 12 /* MAL RX EOB */
#define BL_MAC_ETH0 15 /* MAC */
#define EMAC_NUMS 1
#define IIC0_IRQ 2
......@@ -154,23 +150,25 @@
#define PSR_PCI_ASYNC_EN 0x00001000
#define PSR_PCI_ARBIT_EN 0x00000400
#define CPM_IIC0 0x80000000 /* IIC interface */
#define CPM_PCI 0x40000000 /* PCI bridge */
#define CPM_CPU 0x20000000 /* processor core */
#define CPM_DMA 0x10000000 /* DMA controller */
#define CPM_BRG 0x08000000 /* PLB to OPB bridge */
#define CPM_DCP 0x04000000 /* CodePack */
#define CPM_EBC 0x02000000 /* ROM/SRAM peripheral controller */
#define CPM_SDRAM0 0x01000000 /* SDRAM memory controller */
#define CPM_PLB 0x00800000 /* PLB bus arbiter */
#define CPM_GPIO0 0x00400000 /* General Purpose IO (??) */
#define CPM_UART0 0x00200000 /* serial port 0 */
#define CPM_UART1 0x00100000 /* serial port 1 */
#define CPM_UIC 0x00080000 /* Universal Interrupt Controller */
#define CPM_TMRCLK 0x00040000 /* CPU timers */
#define CPM_EMAC_MM 0x00020000 /* on-chip ethernet MM unit */
#define CPM_EMAC_RM 0x00010000 /* on-chip ethernet RM unit */
#define CPM_EMAC_TM 0x00008000 /* on-chip ethernet TM unit */
#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
#define IBM_CPM_PCI 0x40000000 /* PCI bridge */
#define IBM_CPM_CPU 0x20000000 /* processor core */
#define IBM_CPM_DMA 0x10000000 /* DMA controller */
#define IBM_CPM_OPB 0x08000000 /* PLB to OPB bridge */
#define IBM_CPM_DCP 0x04000000 /* CodePack */
#define IBM_CPM_EBC 0x02000000 /* ROM/SRAM peripheral controller */
#define IBM_CPM_SDRAM0 0x01000000 /* SDRAM memory controller */
#define IBM_CPM_PLB 0x00800000 /* PLB bus arbiter */
#define IBM_CPM_GPIO0 0x00400000 /* General Purpose IO (??) */
#define IBM_CPM_UART0 0x00200000 /* serial port 0 */
#define IBM_CPM_UART1 0x00100000 /* serial port 1 */
#define IBM_CPM_UIC 0x00080000 /* Universal Interrupt Controller */
#define IBM_CPM_TMRCLK 0x00040000 /* CPU timers */
#define IBM_CPM_EMAC0 0x00020000 /* on-chip ethernet MM unit */
#define DFLT_IBM4xx_PM ~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
| IBM_CPM_OPB | IBM_CPM_EBC \
| IBM_CPM_SDRAM0 | IBM_CPM_PLB \
| IBM_CPM_UIC | IBM_CPM_TMRCLK)
#define DCRN_DMA0_BASE 0x100
#define DCRN_DMA1_BASE 0x108
......
arch/ppc/platforms/4xx/ibmnp405h.c
View file @ 80dbb53d
......@@ -28,51 +28,28 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* History: 01/02/2002 - armin
* initial release
*
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/threads.h>
#include <linux/param.h>
#include <linux/string.h>
#include <asm/ocp.h>
#include <platforms/4xx/ibmnp405h.h>
const struct NS16550* COM_PORTS[] =
{
(struct NS16550*) UART0_IO_BASE,
(struct NS16550*) UART1_IO_BASE,
};
const struct pcil0_regs* PCIL0[]=
{
(struct pcil0_regs*) PCIL0_BASE,
};
const struct iic_regs* IIC_ADDR[]=
{
(struct iic_regs*) IIC0_BASE,
};
const struct gpio_regs* GPIO_ADDR[] =
{
(struct gpio_regs*) GPIO0_BASE,
};
const struct emac_regs* EMAC_ADDR[]=
{
(struct emac_regs*) EMAC0_BASE,
(struct emac_regs*) EMAC1_BASE,
(struct emac_regs*) EMAC2_BASE,
(struct emac_regs*) EMAC3_BASE
};
const struct zmii_regs* ZMII_ADDR[]=
{
(zmii_t*) ZMII0_BASE,
struct ocp_def core_ocp[] = {
// {OCP_VENDOR_IBM, OCP_FUNC_PLB, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_OPB, OPB_BASE_START, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_VENDOR_IBM, OCP_FUNC_16550, UART0_IO_BASE, UART0_INT,IBM_CPM_UART0},
{OCP_VENDOR_IBM, OCP_FUNC_16550, UART1_IO_BASE, UART1_INT, IBM_CPM_UART1},
{OCP_VENDOR_IBM, OCP_FUNC_IIC, IIC0_BASE, IIC0_IRQ, IBM_CPM_IIC0},
{OCP_VENDOR_IBM, OCP_FUNC_GPIO, GPIO0_BASE, OCP_IRQ_NA, IBM_CPM_GPIO0},
{OCP_VENDOR_IBM, OCP_FUNC_EMAC, EMAC0_BASE, BL_MAC_ETH0, IBM_CPM_EMAC0},
{OCP_VENDOR_IBM, OCP_FUNC_EMAC, EMAC0_BASE, BL_MAC_ETH0, IBM_CPM_EMAC0},
{OCP_VENDOR_IBM, OCP_FUNC_EMAC, EMAC1_BASE, BL_MAC_ETH1, IBM_CPM_EMAC1},
{OCP_VENDOR_IBM, OCP_FUNC_EMAC, EMAC2_BASE, BL_MAC_ETH2, IBM_CPM_EMAC2},
{OCP_VENDOR_IBM, OCP_FUNC_EMAC, EMAC3_BASE, BL_MAC_ETH3, IBM_CPM_EMAC3},
{OCP_VENDOR_IBM, OCP_FUNC_PHY, ZMII0_BASE, OCP_IRQ_NA, OCP_CPM_NA},
// {OCP_VENDOR_IBM, OCP_FUNC_EXT, EBIU_BASE_START, OCP_IRQ_NA,IBM_CPM_EBC},
// {OCP_VENDOR_IBM, OCP_FUNC_PCI, PCIL0_BASE, OCP_IRQ_NA, IBM_CPM_PCI},
{OCP_VENDOR_INVALID, OCP_FUNC_INVALID, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
};
arch/ppc/platforms/4xx/ibmnp405h.h
View file @ 80dbb53d
......@@ -30,11 +30,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Version 1.0 (02/01/03) - A. Kuster
* Initial version
*
* Version 1.1 02/01/17 - A. Kuster
* moved common ofsets to ibm405.h
*/
#ifdef __KERNEL__
......@@ -42,7 +37,7 @@
#define __ASM_IBMNP405H_H__
#include <linux/config.h>
#include <platforms/4xx/ibm_ocp.h>
#include <asm/ibm_ocp.h>
/* ibm405.h at bottom of this file */
......@@ -70,6 +65,9 @@
#define PPC4xx_ONB_IO_ADDR ((uint)0xef600000)
#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
#define OPB_BASE_START 0x40000000
#define EBIU_BASE_START 0xF0100000
/* serial port defines */
#define RS_TABLE_SIZE 4
......@@ -83,28 +81,40 @@
#define GPIO0_BASE 0xEF600700
#define EMAC0_BASE 0xEF600800
#define EMAC1_BASE 0xEF600900
#define EMAC2_BASE 0xEF600900
#define EMAC3_BASE 0xEF600900
#define EMAC2_BASE 0xEF600a00
#define EMAC3_BASE 0xEF600b00
#define ZMII0_BASE 0xEF600C10
#define BL_MAC_WOL 41 /* WOL */
#define BL_MAL_SERR 45 /* MAL SERR */
#define BL_MAL_TXDE 46 /* MAL TXDE */
#define BL_MAL_RXDE 47 /* MAL RXDE */
#define BL_MAL_TXEOB 17 /* MAL TX EOB */
#define BL_MAL_RXEOB 18 /* MAL RX EOB */
#define BL_MAC_ETH0 37 /* MAC */
#define BL_MAC_ETH1 38 /* MAC */
#define BL_MAC_ETH2 39 /* MAC */
#define BL_MAC_ETH3 40 /* MAC */
#define EMAC_NUMS 4
#define UART_NUMS 2
#define ZMII_NUMS 1
#define IIC0_IRQ 2
#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: UART##num##_IO_BASE, \
iomem_base:(u8 *) UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#if defined(CONFIG_UART0_TTYS0)
#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1)
#endif
#if defined(CONFIG_UART0_TTYS1)
#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(1) \
STD_UART_OP(0)
......@@ -113,28 +123,42 @@
/* DCR defines */
/* ------------------------------------------------------------------------- */
#define DCRN_CHCR_BASE 0x0B1
#define DCRN_CHCR_BASE 0x0F1
#define DCRN_CHPSR_BASE 0x0B4
#define DCRN_CPMSR_BASE 0x0B8
#define DCRN_CPMFR_BASE 0x0BA
#define CPM_IIC0 0x80000000 /* IIC interface */
#define CPM_PCI 0x40000000 /* PCI bridge */
#define CPM_CPU 0x20000000 /* processor core */
#define CPM_DMA 0x10000000 /* DMA controller */
#define CPM_BRG 0x08000000 /* PLB to OPB bridge */
#define CPM_DCP 0x04000000 /* CodePack */
#define CPM_EBC 0x02000000 /* ROM/SRAM peripheral controller */
#define CPM_SDRAM0 0x01000000 /* SDRAM memory controller */
#define CPM_PLB 0x00800000 /* PLB bus arbiter */
#define CPM_GPIO0 0x00400000 /* General Purpose IO (??) */
#define CPM_UART0 0x00200000 /* serial port 0 */
#define CPM_UART1 0x00100000 /* serial port 1 */
#define CPM_UIC = 0x00080000 /* Universal Interrupt Controller */
#define CPM_TMRCLK 0x00040000 /* CPU timers */
#define CPM_EMAC_MM 0x00020000 /* on-chip ethernet MM unit */
#define CPM_EMAC_RM 0x00010000 /* on-chip ethernet RM unit */
#define CPM_EMAC_TM 0x00008000 /* on-chip ethernet TM unit */
#define DCRN_CPMSR_BASE 0x0BA
#define DCRN_CPMFR_BASE 0x0B9
#define DCRN_CPMER_BASE 0x0B8
/* CPM Clocking & Power Mangement defines */
#define IBM_CPM_PCI 0x40000000 /* PCI */
#define IBM_CPM_EMAC2 0x20000000 /* EMAC 2 MII */
#define IBM_CPM_EMAC3 0x04000000 /* EMAC 3 MII */
#define IBM_CPM_EMAC0 0x00800000 /* EMAC 0 MII */
#define IBM_CPM_EMAC1 0x00100000 /* EMAC 1 MII */
#define IBM_CPM_EMMII 0 /* Shift value for MII */
#define IBM_CPM_EMRX 1 /* Shift value for recv */
#define IBM_CPM_EMTX 2 /* Shift value for MAC */
#define IBM_CPM_UIC1 0x00020000 /* Universal Interrupt Controller */
#define IBM_CPM_UIC0 0x00010000 /* Universal Interrupt Controller */
#define IBM_CPM_CPU 0x00008000 /* processor core */
#define IBM_CPM_EBC 0x00004000 /* ROM/SRAM peripheral controller */
#define IBM_CPM_SDRAM0 0x00002000 /* SDRAM memory controller */
#define IBM_CPM_GPIO0 0x00001000 /* General Purpose IO (??) */
#define IBM_CPM_HDLC 0x00000800 /* HDCL */
#define IBM_CPM_TMRCLK 0x00000400 /* CPU timers */
#define IBM_CPM_PLB 0x00000100 /* PLB bus arbiter */
#define IBM_CPM_OPB 0x00000080 /* PLB to OPB bridge */
#define IBM_CPM_DMA 0x00000040 /* DMA controller */
#define IBM_CPM_IIC0 0x00000010 /* IIC interface */
#define IBM_CPM_UART0 0x00000002 /* serial port 0 */
#define IBM_CPM_UART1 0x00000001 /* serial port 1 */
/* this is the default setting for devices put to sleep when booting */
#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \
| IBM_CPM_EBC | IBM_CPM_SDRAM0 | IBM_CPM_PLB \
| IBM_CPM_OPB | IBM_CPM_TMRCLK | IBM_CPM_DMA \
| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 | IBM_CPM_EMAC2 \
| IBM_CPM_EMAC3 | IBM_CPM_PCI)
#define DCRN_DMA0_BASE 0x100
#define DCRN_DMA1_BASE 0x108
......@@ -151,20 +175,29 @@
#define DCRN_POB0_BASE 0x0A0
#define DCRN_SDRAM0_BASE 0x010
#define DCRN_UIC0_BASE 0x0C0
/* unique H offsets */
#ifdef DCRN_UIC1_BASE
#define DCRN_UIC1_SR (DCRN_UIC1_BASE + 0x0)
#define DCRN_UIC1_SRS (DCRN_UIC1_BASE + 0x1)
#define DCRN_UIC1_ER (DCRN_UIC1_BASE + 0x2)
#define DCRN_UIC1_CR (DCRN_UIC1_BASE + 0x3)
#define DCRN_UIC1_PR (DCRN_UIC1_BASE + 0x4)
#define DCRN_UIC1_TR (DCRN_UIC1_BASE + 0x5)
#define DCRN_UIC1_MSR (DCRN_UIC1_BASE + 0x6)
#define DCRN_UIC1_VR (DCRN_UIC1_BASE + 0x7)
#define DCRN_UIC1_VCR (DCRN_UIC1_BASE + 0x8)
#endif
#define DCRN_UIC1_BASE 0x0D0
#define DCRN_CPC0_EPRCSR 0x0F3
#define UIC0_UIC1NC 30 /* UIC1 non-critical interrupt */
#define UIC0_UIC1CR 31 /* UIC1 critical interrupt */
#define CHR1_CETE 0x00000004 /* CPU external timer enable */
#define UIC0 DCRN_UIC0_BASE
#define UIC1 DCRN_UIC1_BASE
#undef NR_UICS
#define NR_UICS 2
#define UIC_CASCADE_MASK 0x0003 /* bits 30 & 31 */
/* EMAC DCRN's FIXME: armin */
#define DCRN_MALRXCTP2R(base) ((base) + 0x42) /* Channel Rx 2 Channel Table Pointer */
#define DCRN_MALRXCTP3R(base) ((base) + 0x43) /* Channel Rx 3 Channel Table Pointer */
#define DCRN_MALTXCTP4R(base) ((base) + 0x24) /* Channel Tx 4 Channel Table Pointer */
#define DCRN_MALTXCTP5R(base) ((base) + 0x25) /* Channel Tx 5 Channel Table Pointer */
#define DCRN_MALTXCTP6R(base) ((base) + 0x26) /* Channel Tx 6 Channel Table Pointer */
#define DCRN_MALTXCTP7R(base) ((base) + 0x27) /* Channel Tx 7 Channel Table Pointer */
#define DCRN_MALRCBS2(base) ((base) + 0x62) /* Channel Rx 2 Channel Buffer Size */
#define DCRN_MALRCBS3(base) ((base) + 0x63) /* Channel Rx 3 Channel Buffer Size */
#include <asm/ibm405.h>
......
arch/ppc/platforms/4xx/ibmnp405l.c
View file @ 80dbb53d
......@@ -28,9 +28,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* History: 12/26/2001 - armin
* initial release
*
*/
#include <linux/config.h>
......@@ -41,30 +38,15 @@
#include <linux/string.h>
#include <platforms/4xx/ibmnp405l.h>
const struct NS16550* COM_PORTS[] =
{
(struct NS16550*) UART0_IO_BASE,
(struct NS16550*) UART1_IO_BASE,
};
const struct iic_regs* IIC_ADDR[]=
{
(struct iic_regs*) IIC0_BASE,
};
const struct gpio_regs* GPIO_ADDR[] =
{
(struct gpio_regs*) GPIO0_BASE,
};
const struct emac_regs* EMAC_ADDR[]=
{
(struct emac_regs*) EMAC0_BASE,
(struct emac_regs*) EMAC1_BASE
};
struct ocp_def core_ocp[] = {
{UART, UART0_IO_BASE, UART0_INT, IBM_CPM_UART0},
{UART, UART1_IO_BASE, UART1_INT, IBM_CPM_UART1},
{IIC, IIC0_BASE, IIC0_IRQ, IBM_CPM_IIC0},
{GPIO, GPIO0_BASE, OCP_IRQ_NA, IBM_CPM_GPIO0},
{OPB, OPB0_BASE, OCP_IRQ_NA, IBM_CPM_OPB},
{EMAC, EMAC0_BASE, BL_MAC_ETH0, IBM_CPM_EMAC0},
{EMAC, EMAC1_BASE, BL_MAC_ETH1, IBM_CPM_EMAC1},
{ZMII, ZMII0_BASE, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_NULL_TYPE, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
const struct zmii_regs* ZMII_ADDR[]=
{
(zmii_t*) ZMII0_BASE,
};
arch/ppc/platforms/4xx/ibmnp405l.h
View file @ 80dbb53d
......@@ -30,11 +30,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Version 1.0 (01/10/10) - A. Kuster
* Initial version
*
* Version 1.1 (02/01/16) - A. Kuster
* Cleaned out common 405B3 core stuff
*/
#ifdef __KERNEL__
......@@ -42,18 +37,6 @@
#define __ASM_IBMNP405L_H__
#include <linux/config.h>
#include <platforms/4xx/ibm_ocp.h>
/* ibm405.h at bottom of this file */
#define PPC4xx_PCI_IO_ADDR ((uint)PPC405_PCI_PHY_IO_BASE)
#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
#define PPC4xx_PCI_CFG_ADDR ((uint)PPC405_PCI_CONFIG_ADDR)
#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
#define PPC4xx_PCI_LCFG_ADDR ((uint)0xef400000)
#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
#define PPC4xx_ONB_IO_ADDR ((uint)0xef600000)
#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
/* serial port defines */
#define RS_TABLE_SIZE 2
......@@ -61,33 +44,48 @@
#define UART0_INT 0
#define UART1_INT 1
#define UART0_IO_BASE (u8 *)0xEF600300
#define UART1_IO_BASE (u8 *)0xEF600400
#define UART0_IO_BASE 0xEF600300
#define UART1_IO_BASE 0xEF600400
#define IIC0_BASE 0xEF600500
#define OPB0_BASE 0xEF600600
#define GPIO0_BASE 0xEF600700
#define EMAC0_BASE 0xEF600800
#define EMAC1_BASE 0xEF600900
#define ZMII0_BASE 0xEF600C10
#define BL_MAC_WOL 41 /* WOL */
#define BL_MAL_SERR 45 /* MAL SERR */
#define BL_MAL_TXDE 46 /* MAL TXDE */
#define BL_MAL_RXDE 47 /* MAL RXDE */
#define BL_MAL_TXEOB 17 /* MAL TX EOB */
#define BL_MAL_RXEOB 18 /* MAL RX EOB */
#define BL_MAC_ETH0 37 /* MAC */
#define BL_MAC_ETH1 38 /* MAC */
#define EMAC_NUMS 2
#define UART_NUMS 2
#define ZMII_NUMS 1
#define IIC0_IRQ 2
#undef NR_UICS
#define NR_UICS 2
#define UIC_CASCADE_MASK 0x0003 /* bits 30 & 31 */
#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: UART##num##_IO_BASE, \
iomem_base:(u8 *) UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#if defined(CONFIG_UART0_TTYS0)
#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1)
#endif
#if defined(CONFIG_UART0_TTYS1)
#define SERIAL_DEBUG_IO_BASE UART1_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(1) \
STD_UART_OP(0)
......@@ -96,28 +94,32 @@
/* DCR defines */
/* ------------------------------------------------------------------------- */
#define DCRN_CHCR_BASE 0x0B1
#define DCRN_CHCR_BASE 0x0F1
#define DCRN_CHPSR_BASE 0x0B4
#define DCRN_CPMSR_BASE 0x0B8
#define DCRN_CPMFR_BASE 0x0BA
#define CPM_IIC0 0x80000000 /* IIC interface */
#define CPM_PCI 0x40000000 /* PCI bridge */
#define CPM_CPU 0x20000000 /* processor core */
#define CPM_DMA 0x10000000 /* DMA controller */
#define CPM_BRG 0x08000000 /* PLB to OPB bridge */
#define CPM_DCP 0x04000000 /* CodePack */
#define CPM_EBC 0x02000000 /* ROM/SRAM peripheral controller */
#define CPM_SDRAM0 0x01000000 /* SDRAM memory controller */
#define CPM_PLB 0x00800000 /* PLB bus arbiter */
#define CPM_GPIO0 0x00400000 /* General Purpose IO (??) */
#define CPM_UART0 0x00200000 /* serial port 0 */
#define CPM_UART1 0x00100000 /* serial port 1 */
#define CPM_UIC 0x00080000 /* Universal Interrupt Controller */
#define CPM_TMRCLK 0x00040000 /* CPU timers */
#define CPM_EMAC_MM 0x00020000 /* on-chip ethernet MM unit */
#define CPM_EMAC_RM 0x00010000 /* on-chip ethernet RM unit */
#define CPM_EMAC_TM 0x00008000 /* on-chip ethernet TM unit */
#define DCRN_CPMSR_BASE 0x0BA
#define DCRN_CPMFR_BASE 0x0B9
#define DCRN_CPMER_BASE 0x0B8
#define IBM_CPM_EMAC0 0x00800000 /* on-chip ethernet MM unit */
#define IBM_CPM_EMAC1 0x00100000 /* EMAC 1 MII */
#define IBM_CPM_UIC1 0x00020000 /* Universal Interrupt Controller */
#define IBM_CPM_UIC0 0x00010000 /* Universal Interrupt Controller */
#define IBM_CPM_CPU 0x00008000 /* processor core */
#define IBM_CPM_EBC 0x00004000 /* ROM/SRAM peripheral controller */
#define IBM_CPM_SDRAM0 0x00002000 /* SDRAM memory controller */
#define IBM_CPM_GPIO0 0x00001000 /* General Purpose IO (??) */
#define IBM_CPM_HDLC 0x00000800 /* HDCL */
#define IBM_CPM_TMRCLK 0x00000400 /* CPU timers */
#define IBM_CPM_PLB 0x00000100 /* PLB bus arbiter */
#define IBM_CPM_OPB 0x00000080 /* PLB to OPB bridge */
#define IBM_CPM_DMA 0x00000040 /* DMA controller */
#define IBM_CPM_IIC0 0x00000010 /* IIC interface */
#define IBM_CPM_UART0 0x00000002 /* serial port 0 */
#define IBM_CPM_UART1 0x00000001 /* serial port 1 */
#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \
| IBM_CPM_EBC | IBM_CPM_SDRAM0 | IBM_CPM_PLB \
| IBM_CPM_OPB | IBM_CPM_TMRCLK | IBM_CPM_DMA \
| IBM_CPM_EMAC0 | IBM_CPM_EMAC1)
#define DCRN_DMA0_BASE 0x100
#define DCRN_DMA1_BASE 0x108
......@@ -128,28 +130,26 @@
#define DCRN_EBC_BASE 0x012
#define DCRN_DCP0_BASE 0x014
#define DCRN_MAL_BASE 0x180
#define DCRN_MAL1_BASE 0x200
#define DCRN_OCM0_BASE 0x018
#define DCRN_PLB0_BASE 0x084
#define DCRN_PLLMR_BASE 0x0B0
#define DCRN_PLLMR_BASE 0x0F0
#define DCRN_POB0_BASE 0x0A0
#define DCRN_SDRAM0_BASE 0x010
#define DCRN_UIC0_BASE 0x0C0
#define DCRN_UIC1_BASE 0x0C0
/* need to clean this up - armin */
#ifdef DCRN_UIC1_BASE
#define DCRN_UIC1_SR (DCRN_UIC1_BASE + 0x0)
#define DCRN_UIC1_SRS (DCRN_UIC1_BASE + 0x1)
#define DCRN_UIC1_ER (DCRN_UIC1_BASE + 0x2)
#define DCRN_UIC1_CR (DCRN_UIC1_BASE + 0x3)
#define DCRN_UIC1_PR (DCRN_UIC1_BASE + 0x4)
#define DCRN_UIC1_TR (DCRN_UIC1_BASE + 0x5)
#define DCRN_UIC1_MSR (DCRN_UIC1_BASE + 0x6)
#define DCRN_UIC1_VR (DCRN_UIC1_BASE + 0x7)
#define DCRN_UIC1_VCR (DCRN_UIC1_BASE + 0x8)
#endif
#define DCRN_UIC1_BASE 0x0D0
#define DCRN_CPC0_EPRCSR 0x0F3
#define UIC0_UIC1NC 30 /* UIC1 non-critical interrupt */
#define UIC0_UIC1CR 31 /* UIC1 critical interrupt */
#define CHR1_CETE 0x00000004 /* CPU external timer enable */
#define UIC0 DCRN_UIC0_BASE
#define UIC1 DCRN_UIC1_BASE
#define SDRAM_CFG 0x20
#define SDRAM0_ECCCFG 0x94
#define SDRAM_NO_ECC 0x10000000
#include <asm/ibm405.h>
#endif /* __ASM_IBMNP405L_H__ */
......
arch/ppc/platforms/4xx/ibmstb3.c
View file @ 80dbb53d
......@@ -28,26 +28,18 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* History: 01/08/2002 - armin
* initial release
*
*/
#include <linux/config.h>
#include <platforms/4xx/ibmstb3.h>
#include "ibmstb3.h"
#include <asm/ocp.h>
const struct NS16550* COM_PORTS[] =
{
(struct NS16550*) UART0_IO_BASE,
};
struct ocp_def core_ocp[] = {
{UART, UART0_IO_BASE, UART0_INT, IBM_CPM_UART0},
{IIC, IIC0_BASE, IIC0_IRQ, IBM_CPM_IIC0},
{IIC, IIC1_BASE, IIC1_IRQ, IBM_CPM_IIC1},
{GPIO, GPIO0_BASE, OCP_IRQ_NA, IBM_CPM_GPIO0},
{OPB, OPB0_BASE, OCP_IRQ_NA, OCP_CPM_NA},
{OCP_NULL_TYPE, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
const struct iic_regs* IIC_ADDR[]=
{
(struct iic_regs*) IIC0_BASE,
};
const struct gpio_regs* GPIO_ADDR[] =
{
(struct gpio_regs*) GPIO0_BASE,
};
arch/ppc/platforms/4xx/ibmstb3.h
View file @ 80dbb53d
......@@ -32,15 +32,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Version 1.0 Oct 10, 2001 - A. Kuster
* Initial version - moved stbx specific out of ibm4xx.h
*
* Version 1.1 Oct 25, 2001 - T. Rini
* Lots of cleanups, and we get included by the board-specific file.
*
* Version 1.2 Jan 16, 2002 - A. Kuster
* Removed common dcr offests that are now in ibm405.h
*
*/
#ifdef __KERNEL__
......@@ -84,9 +75,9 @@
#define RS_TABLE_SIZE 1
#define UART0_INT 20
#ifdef __BOOTER__
#define UART0_IO_BASE (u8 *)0x40040000
#define UART0_IO_BASE 0x40040000
#else
#define UART0_IO_BASE (u8 *)STB03xxx_MAP_IO_ADDR(0x40040000)
#define UART0_IO_BASE 0xe0040000
#endif
/* UART 0 is duped here so when the SICC is the default console
......@@ -95,9 +86,9 @@
#define UART1_INT 20
#ifdef __BOOTER__
#define UART1_IO_BASE (u8 *)0x40040000
#define UART1_IO_BASE 0x40040000
#else
#define UART1_IO_BASE (u8 *)STB03xxx_MAP_IO_ADDR(0x40040000)
#define UART1_IO_BASE 0xe0040000
#endif
/* need to make this work in scheme - armin */
......@@ -106,25 +97,35 @@
#define SICC0_INTTX 22
#define SICC0_IO_BASE ((uint* )0x40000000)
#define IDE0_BASE 0xf2100000
#define REDWOOD_IDE_CTRL 0xf4100000
#define IIC0_BASE 0x40030000
#define IIC1_BASE 0x400b0000
#define OPB0_BASE 0x40010000
#define GPIO0_BASE 0x40060000
#define IIC0_IRQ 9
#define IIC1_IRQ 10
#define IIC_OWN 0x55
#define IIC_CLOCK 50
#define IDE0_IRQ 25
#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: UART##num##_IO_BASE, \
iomem_base: (u8 *)UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#if defined(CONFIG_UART0_TTYS0)
#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(0)
#endif
#if defined(CONFIG_UART0_TTYS1)
#define SERIAL_DEBUG_IO_BASE UART1_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(1)
#endif
......@@ -149,72 +150,39 @@
#define DCRN_CPMFR_BASE 0x102
#define DCRN_SCCR_BASE 0x120
#define UIC0 DCRN_UIC0_BASE
#define IBM_CPM_IIC0 0x80000000 /* IIC 0 interface */
#define IBM_CPM_I1284 0x40000000 /* IEEE-1284 */
#define IBM_CPM_IIC1 0x20000000 /* IIC 1 interface */
#define IBM_CPM_CPU 0x10000000 /* PPC405B3 clock control */
#define IBM_CPM_AUD 0x08000000 /* Audio Decoder */
#define IBM_CPM_EBIU 0x04000000 /* External Bus Interface Unit */
#define IBM_CPM_SDRAM1 0x02000000 /* SDRAM 1 memory controller */
#define IBM_CPM_DMA 0x01000000 /* DMA controller */
#define IBM_CPM_UART1 0x00100000 /* Serial 1 / Infrared */
#define IBM_CPM_UART0 0x00080000 /* Serial 0 / 16550 */
#define IBM_CPM_DCRX 0x00040000 /* DCR Extension */
#define IBM_CPM_SC0 0x00020000 /* Smart Card 0 */
#define IBM_CPM_SC1 0x00008000 /* Smart Card 1 */
#define IBM_CPM_SDRAM0 0x00004000 /* SDRAM 0 memory controller */
#define IBM_CPM_XPT54 0x00002000 /* Transport - 54 Mhz */
#define IBM_CPM_CBS 0x00001000 /* Cross Bar Switch */
#define IBM_CPM_GPT 0x00000800 /* GPTPWM */
#define IBM_CPM_GPIO0 0x00000400 /* General Purpose IO 0 */
#define IBM_CPM_DENC 0x00000200 /* Digital video Encoder */
#define IBM_CPM_TMRCLK 0x00000100 /* CPU timers */
#define IBM_CPM_XPT27 0x00000080 /* Transport - 27 Mhz */
#define IBM_CPM_UIC 0x00000040 /* Universal Interrupt Controller */
#define IBM_CPM_MSI 0x00000010 /* Modem Serial Interface (SSP) */
#define IBM_CPM_UART2 0x00000008 /* Serial Control Port */
#define IBM_CPM_DSCR 0x00000004 /* Descrambler */
#define IBM_CPM_VID2 0x00000002 /* Video Decoder clock domain 2 */
#define CPM_IIC0 0x80000000 /* IIC 0 interface */
#define CPM_I1284 0x40000000 /* IEEE-1284 */
#define CPM_IIC1 0x20000000 /* IIC 1 interface */
#define CPM_CPU 0x10000000 /* PPC405B3 clock control */
#define CPM_AUD 0x08000000 /* Audio Decoder */
#define CPM_EBIU 0x04000000 /* External Bus Interface Unit */
#define CPM_SDRAM1 0x02000000 /* SDRAM 1 memory controller */
#define CPM_DMA 0x01000000 /* DMA controller */
#define CPM_RES_1 0x00800000 /* reserved */
#define CPM_RES_2 0x00400000 /* reserved */
#define CPM_RES_3 0x00200000 /* reserved */
#define CPM_UART1 0x00100000 /* Serial 1 / Infrared */
#define CPM_UART0 0x00080000 /* Serial 0 / 16550 */
#define CPM_DCRX 0x00040000 /* DCR Extension */
#define CPM_SC0 0x00020000 /* Smart Card 0 */
#define CPM_RES_4 0x00010000 /* reserved */
#define CPM_SC1 0x00008000 /* Smart Card 1 */
#define CPM_SDRAM0 0x00004000 /* SDRAM 0 memory controller */
#define CPM_XPT54 0x00002000 /* Transport - 54 Mhz */
#define CPM_CBS 0x00001000 /* Cross Bar Switch */
#define CPM_GPT 0x00000800 /* GPTPWM */
#define CPM_GPIO0 0x00000400 /* General Purpose IO 0 */
#define CPM_DENC 0x00000200 /* Digital video Encoder */
#define CPM_TMRCLK 0x00000100 /* CPU timers */
#define CPM_XPT27 0x00000080 /* Transport - 27 Mhz */
#define CPM_UIC 0x00000040 /* Universal Interrupt Controller */
#define CPM_RES_5 0x00000020 /* reserved */
#define CPM_MSI 0x00000010 /* Modem Serial Interface (SSP) */
#define CPM_UART2 0x00000008 /* Serial Control Port */
#define CPM_DSCR 0x00000004 /* Descrambler */
#define CPM_VID2 0x00000002 /* Video Decoder clock domain 2 */
#define CPM_RES_6 0x00000001 /* reserved */
/* 0x80000000 */
#define UIC_XPORT 0x40000000 /* 1 Transport */
#define UIC_AUDIO 0x20000000 /* 2 Audio Decoder */
#define UIC_VIDEO 0x10000000 /* 3 Video Decoder */
#define UIC_D0 0x08000000 /* 4 DMA Channel 0 */
#define UIC_D1 0x04000000 /* 5 DMA Channel 1 */
#define UIC_D2 0x02000000 /* 6 DMA Channel 2 */
#define UIC_D3 0x01000000 /* 7 DMA Channel 3 */
#define UIC_SC0 0x00800000 /* 8 SmartCard 0 Controller */
#define UIC_IIC0 0x00400000 /* 9 IIC 0 */
#define UIC_IIC1 0x00200000 /* 10 IIC 1 */
#define UIC_PWM0 0x00100000 /* 11 GPT_PWM 0: Capture Timers */
#define UIC_PWM1 0x00080000 /* 12 GPT_PWM 1: Compare Timers */
#define UIC_SCP 0x00040000 /* 13 Serial Control Port */
#define UIC_SSP 0x00020000 /* 14 Soft Modem/Synchronous Serial Port */
#define UIC_PWM2 0x00010000 /* 15 GPT_PWM 2: Down Counters */
#define UIC_SC1 0x00008000 /* 16 SmartCard 1 Controller */
#define UIC_EIR7 0x00004000 /* 17 External IRQ 7 */
#define UIC_EIR8 0x00002000 /* 18 External IRQ 8 */
#define UIC_EIR9 0x00001000 /* 19 External IRQ 9 */
#define UIC_U0 0x00000800 /* 20 UART0 */
#define UIC_IR_RCV 0x00000400 /* 21 Serial 1 / Infrared UART Receive */
#define UIC_IR_XMIT 0x00000200 /* 22 Serial 1 / Infrared UART Transmit */
#define UIC_IEEE1284 0x00000100 /* 23 IEEE-1284 / PPU */
#define UIC_DCRX 0x00000080 /* 24 DCRX */
#define UIC_EIR0 0x00000040 /* 25 External IRQ 0 */
#define UIC_EIR1 0x00000020 /* 26 External IRQ 1 */
#define UIC_EIR2 0x00000010 /* 27 External IRQ 2 */
#define UIC_EIR3 0x00000008 /* 28 External IRQ 3 */
#define UIC_EIR4 0x00000004 /* 29 External IRQ 4 */
#define UIC_EIR5 0x00000002 /* 30 External IRQ 5 */
#define UIC_EIR6 0x00000001 /* 31 External IRQ 6 */
#define DFLT_IBM4xx_PM ~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_SDRAM1 \
| IBM_CPM_DMA | IBM_CPM_CBS | IBM_CPM_SDRAM0 \
| IBM_CPM_XPT54 | IBM_CPM_TMRCLK | IBM_CPM_XPT27 \
| IBM_CPM_UIC)
#ifdef DCRN_CIC_BASE
#define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */
......
arch/ppc/platforms/4xx/ibmstb4.c
View file @ 80dbb53d
......@@ -28,34 +28,21 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* History: 12/26/2001 - armin
* initial release
*
*/
#include <linux/config.h>
#include <platforms/4xx/ibmstb4.h>
const struct NS16550* COM_PORTS[] =
{
(struct NS16550*) UART0_IO_BASE,
(struct NS16550*) UART1_IO_BASE,
(struct NS16550*) UART2_IO_BASE,
};
const struct iic_regs* IIC_ADDR[]=
{
(struct iic_regs*) IIC0_BASE,
};
const struct gpio_regs* GPIO_ADDR[] =
{
(struct gpio_regs*) GPIO0_BASE,
};
const struct ide_regs* IDE_ADDR[] =
{
(struct ide_regs*) IDE0_IO_ADDR,
#include <linux/module.h>
#include "ibmstb4.h"
#include <asm/ocp.h>
struct ocp_def core_ocp[] = {
{UART, UART0_IO_BASE, UART0_INT,IBM_CPM_UART0},
{UART, UART1_IO_BASE, UART1_INT, IBM_CPM_UART1},
{UART, UART2_IO_BASE, UART2_INT, IBM_CPM_UART2},
{IIC, IIC0_BASE, IIC0_IRQ, IBM_CPM_IIC0},
{IIC, IIC1_BASE, IIC1_IRQ, IBM_CPM_IIC1},
{GPIO, GPIO0_BASE, OCP_IRQ_NA, IBM_CPM_GPIO0},
{IDE, IDE0_BASE, IDE0_IRQ, OCP_CPM_NA},
{USB, USB0_BASE, USB0_IRQ, IBM_CPM_USB0},
{OCP_NULL_TYPE, 0x0, OCP_IRQ_NA, OCP_CPM_NA},
};
arch/ppc/platforms/4xx/ibmstb4.h
View file @ 80dbb53d
......@@ -30,11 +30,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Version 1.0 (01/10/10) - A. Kuster
* Initial version
*
* Version 1.1 02/01/17 - A. Kuster
* moved common offsets to ibm405.h
*/
#ifdef __KERNEL__
......@@ -72,31 +67,57 @@
#define RS_TABLE_SIZE 3
#define UART0_INT 20
#define UART0_IO_BASE (u8 *)0x40040000
#ifdef __BOOTER__
#define UART0_IO_BASE 0x40040000
#else
#define UART0_IO_BASE 0xe0040000
#endif
#define UART1_INT 21
#define UART1_IO_BASE (u8 *)0x40000000
#define UART2_INT 31
#define UART2_IO_BASE (u8 *)0x400e0000
#define IDE0_IO_ADDR 0x400F0000
#define IDE0_IO_SIZE 0x200
#ifdef __BOOTER__
#define UART1_IO_BASE 0x40000000
#else
#define UART1_IO_BASE 0xe0000000
#endif
#define UART2_INT 31
#ifdef __BOOTER__
#define UART2_IO_BASE 0x400e0000
#else
#define UART2_IO_BASE 0xe00e0000
#endif
#define IDE0_BASE 0x400F0000
#define IDE0_SIZE 0x200
#define IDE0_IRQ 25
#define IIC0_BASE 0x40030000
#define IIC1_BASE 0x400b0000
#define OPB0_BASE 0x40000000
#define GPIO0_BASE 0x40060000
#define USB0_IRQ 18
#define USB0_BASE STB04xxx_MAP_IO_ADDR(0x40010000)
#define USB0_EXTENT 4096
#define IIC_NUMS 2
#define UART_NUMS 3
#define IIC0_IRQ 9
#define IIC1_IRQ 10
#define IIC_OWN 0x55
#define IIC_CLOCK 50
#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: UART##num##_IO_BASE, \
iomem_base: (u8 *)UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#if defined(CONFIG_UART0_TTYS0)
#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1) \
......@@ -104,6 +125,7 @@
#endif
#if defined(CONFIG_UART0_TTYS1)
#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(1) \
STD_UART_OP(0) \
......@@ -111,6 +133,7 @@
#endif
#if defined(CONFIG_UART0_TTYS2)
#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE
#define SERIAL_PORT_DFNS \
STD_UART_OP(2) \
STD_UART_OP(0) \
......@@ -140,72 +163,43 @@
#define DCRN_DCRX_BASE 0x020
#define DCRN_CPMFR_BASE 0x102
#define DCRN_SCCR_BASE 0x120
#define UIC0 DCRN_UIC0_BASE
#define CPM_IIC0 0x80000000 /* IIC 0 interface */
#define CPM_I1284 0x40000000 /* IEEE-1284 */
#define CPM_IIC1 0x20000000 /* IIC 1 interface */
#define CPM_CPU 0x10000000 /* PPC405B3 clock control */
#define CPM_AUD 0x08000000 /* Audio Decoder */
#define CPM_EBIU 0x04000000 /* External Bus Interface Unit */
#define CPM_SDRAM1 0x02000000 /* SDRAM 1 memory controller */
#define CPM_DMA 0x01000000 /* DMA controller */
#define CPM_RES_1 0x00800000 /* reserved */
#define CPM_RES_2 0x00400000 /* reserved */
#define CPM_RES_3 0x00200000 /* reserved */
#define CPM_UART1 0x00100000 /* Serial 1 / Infrared */
#define CPM_UART0 0x00080000 /* Serial 0 / 16550 */
#define CPM_DCRX 0x00040000 /* DCR Extension */
#define CPM_SC0 0x00020000 /* Smart Card 0 */
#define CPM_RES_4 0x00010000 /* reserved */
#define CPM_SC1 0x00008000 /* Smart Card 1 */
#define CPM_SDRAM0 0x00004000 /* SDRAM 0 memory controller */
#define CPM_XPT54 0x00002000 /* Transport - 54 Mhz */
#define CPM_CBS 0x00001000 /* Cross Bar Switch */
#define CPM_GPT 0x00000800 /* GPTPWM */
#define CPM_GPIO0 0x00000400 /* General Purpose IO 0 */
#define CPM_DENC 0x00000200 /* Digital video Encoder */
#define CPM_TMRCLK 0x00000100 /* CPU timers */
#define CPM_XPT27 0x00000080 /* Transport - 27 Mhz */
#define CPM_UIC 0x00000040 /* Universal Interrupt Controller */
#define CPM_RES_5 0x00000020 /* reserved */
#define CPM_MSI 0x00000010 /* Modem Serial Interface (SSP) */
#define CPM_UART2 0x00000008 /* Serial Control Port */
#define CPM_DSCR 0x00000004 /* Descrambler */
#define CPM_VID2 0x00000002 /* Video Decoder clock domain 2 */
#define CPM_RES_6 0x00000001 /* reserved */
#define IBM_CPM_IIC0 0x80000000 /* IIC 0 interface */
#define IBM_CPM_USB0 0x40000000 /* IEEE-1284 */
#define IBM_CPM_IIC1 0x20000000 /* IIC 1 interface */
#define IBM_CPM_CPU 0x10000000 /* PPC405B3 clock control */
#define IBM_CPM_AUD 0x08000000 /* Audio Decoder */
#define IBM_CPM_EBIU 0x04000000 /* External Bus Interface Unit */
#define IBM_CPM_SDRAM1 0x02000000 /* SDRAM 1 memory controller */
#define IBM_CPM_DMA 0x01000000 /* DMA controller */
#define IBM_CPM_DMA1 0x00800000 /* reserved */
#define IBM_CPM_XPT1 0x00400000 /* reserved */
#define IBM_CPM_XPT2 0x00200000 /* reserved */
#define IBM_CPM_UART1 0x00100000 /* Serial 1 / Infrared */
#define IBM_CPM_UART0 0x00080000 /* Serial 0 / 16550 */
#define IBM_CPM_EPI 0x00040000 /* DCR Extension */
#define IBM_CPM_SC0 0x00020000 /* Smart Card 0 */
#define IBM_CPM_VID 0x00010000 /* reserved */
#define IBM_CPM_SC1 0x00008000 /* Smart Card 1 */
#define IBM_CPM_USBSDRA 0x00004000 /* SDRAM 0 memory controller */
#define IBM_CPM_XPT0 0x00002000 /* Transport - 54 Mhz */
#define IBM_CPM_CBS 0x00001000 /* Cross Bar Switch */
#define IBM_CPM_GPT 0x00000800 /* GPTPWM */
#define IBM_CPM_GPIO0 0x00000400 /* General Purpose IO 0 */
#define IBM_CPM_DENC 0x00000200 /* Digital video Encoder */
#define IBM_CPM_TMRCLK 0x00000100 /* CPU timers */
#define IBM_CPM_XPT27 0x00000080 /* Transport - 27 Mhz */
#define IBM_CPM_UIC 0x00000040 /* Universal Interrupt Controller */
#define IBM_CPM_SSP 0x00000010 /* Modem Serial Interface (SSP) */
#define IBM_CPM_UART2 0x00000008 /* Serial Control Port */
#define IBM_CPM_DDIO 0x00000004 /* Descrambler */
#define IBM_CPM_VID2 0x00000002 /* Video Decoder clock domain 2 */
/* 0x80000000 */
#define UIC_XPORT 0x40000000 /* 1 Transport */
#define UIC_AUDIO 0x20000000 /* 2 Audio Decoder */
#define UIC_VIDEO 0x10000000 /* 3 Video Decoder */
#define UIC_D0 0x08000000 /* 4 DMA Channel 0 */
#define UIC_D1 0x04000000 /* 5 DMA Channel 1 */
#define UIC_D2 0x02000000 /* 6 DMA Channel 2 */
#define UIC_D3 0x01000000 /* 7 DMA Channel 3 */
#define UIC_SC0 0x00800000 /* 8 SmartCard 0 Controller */
#define UIC_IIC0 0x00400000 /* 9 IIC 0 */
#define UIC_IIC1 0x00200000 /* 10 IIC 1 */
#define UIC_PWM0 0x00100000 /* 11 GPT_PWM 0: Capture Timers */
#define UIC_PWM1 0x00080000 /* 12 GPT_PWM 1: Compare Timers */
#define UIC_SCP 0x00040000 /* 13 Serial Control Port */
#define UIC_SSP 0x00020000 /* 14 Soft Modem/Synchronous Serial Port */
#define UIC_PWM2 0x00010000 /* 15 GPT_PWM 2: Down Counters */
#define UIC_SC1 0x00008000 /* 16 SmartCard 1 Controller */
#define UIC_EIR7 0x00004000 /* 17 External IRQ 7 */
#define UIC_EIR8 0x00002000 /* 18 External IRQ 8 */
#define UIC_EIR9 0x00001000 /* 19 External IRQ 9 */
#define UIC_U0 0x00000800 /* 20 UART0 */
#define UIC_IR_RCV 0x00000400 /* 21 Serial 1 / Infrared UART Receive */
#define UIC_IR_XMIT 0x00000200 /* 22 Serial 1 / Infrared UART Transmit */
#define UIC_IEEE1284 0x00000100 /* 23 IEEE-1284 / PPU */
#define UIC_DCRX 0x00000080 /* 24 DCRX */
#define UIC_EIR0 0x00000040 /* 25 External IRQ 0 */
#define UIC_EIR1 0x00000020 /* 26 External IRQ 1 */
#define UIC_EIR2 0x00000010 /* 27 External IRQ 2 */
#define UIC_EIR3 0x00000008 /* 28 External IRQ 3 */
#define UIC_EIR4 0x00000004 /* 29 External IRQ 4 */
#define UIC_EIR5 0x00000002 /* 30 External IRQ 5 */
#define UIC_EIR6 0x00000001 /* 31 External IRQ 6 */
#define DFLT_IBM4xx_PM ~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_SDRAM1 \
| IBM_CPM_DMA | IBM_CPM_DMA1 | IBM_CPM_CBS \
| IBM_CPM_USBSDRA | IBM_CPM_XPT0 | IBM_CPM_TMRCLK \
| IBM_CPM_XPT27 | IBM_CPM_UIC )
#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */
#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */
......
arch/ppc/platforms/4xx/redwood.c
View file @ 80dbb53d
......@@ -7,11 +7,6 @@
*
* Module name: redwood.c
*
* Description:
*
* History: 11/09/2001 - Armin
* added board_init to add in additional instuctions needed during platfrom_init
*
*/
#include <linux/config.h>
......@@ -22,26 +17,58 @@
#include <asm/machdep.h>
void __init
board_setup_arch(void)
redwood_setup_arch(void)
{
ppc4xx_setup_arch();
#ifdef CONFIG_IDE
void *xilinx, *xilinx_1, *xilinx_2;
unsigned short reg5;
xilinx = ioremap(IDE_XLINUX_MUX_BASE, 0x10);
/* init xilinx control registers - enable ide mux, clear reset bit */
if (!xilinx) {
printk(KERN_CRIT
"redwood4_setup_arch() xilinx ioremap failed\n");
return;
}
xilinx_1 = xilinx;
xilinx_2 = xilinx + 0xe;
reg5 = readw(xilinx_1);
writeb(reg5 |= ~(0x8001), xilinx_1);
writeb(0, xilinx_2);
udelay(10 * 1000);
writeb(reg5 & 0x8001, xilinx_1);
writeb(0, xilinx_2);
/* add RE & OEN to value set by boot rom */
mtdcr(DCRN_BRCR3, 0x407cfffe);
#endif
}
void __init
board_io_mapping(void)
redwood_map_io(void)
{
int i;
ppc4xx_map_io();
io_block_mapping(OAKNET_IO_VADDR,
OAKNET_IO_PADDR, OAKNET_IO_SIZE, _PAGE_IO);
}
void __init
board_setup_irq(void)
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
}
ppc4xx_init(r3, r4, r5, r6, r7);
void __init
board_init(void)
{
ppc_md.setup_arch = redwood_setup_arch;
ppc_md.setup_io_mappings = redwood_map_io;
}
arch/ppc/platforms/4xx/redwood.h
View file @ 80dbb53d
......@@ -27,10 +27,12 @@ typedef struct board_info {
unsigned char bi_enetaddr[6]; /* Ethernet MAC address */
unsigned int bi_intfreq; /* Processor speed, in Hz */
unsigned int bi_busfreq; /* Bus speed, in Hz */
unsigned int bi_tbfreq; /* Software timebase freq */
} bd_t;
#define bi_tbfreq bi_intfreq
#endif /* !__ASSEMBLY__ */
#define bi_tbfreq bi_intfreq
#define OAKNET_IO_PADDR ((uint)0xf2000000)
#define OAKNET_IO_VADDR OAKNET_IO_PADDR
#define OAKNET_IO_BASE OAKNET_IO_VADDR
......@@ -39,6 +41,9 @@ typedef struct board_info {
#define OAKNET_IO_SIZE 0xffff
#define OAKNET_INT 26 /* EXTINT1 */
#define IDE_XLINUX_MUX_BASE 0xf2040000
#define IDE_DMA_ADDR 0xfce00000
#define _IO_BASE 0
#define _ISA_MEM_BASE 0
#define PCI_DRAM_OFFSET 0
......
arch/ppc/platforms/4xx/redwood5.c
View file @ 80dbb53d
......@@ -9,9 +9,6 @@
* Description:
* IBM redwood5 eval board file
*
* History: 12/29/2001 - Armin
* initail release
*
*/
#include <linux/config.h>
......@@ -21,12 +18,12 @@
#include <asm/machdep.h>
void __init
board_setup_arch(void)
redwood5_setup_arch(void)
{
bd_t *bip = &__res;
bd_t *bip = (bd_t *)__res;
ppc4xx_setup_arch();
#define CONFIG_DEBUG_BRINGUP
#ifdef CONFIG_DEBUG_BRINGUP
printk("\n");
printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
......@@ -53,10 +50,11 @@ board_setup_arch(void)
}
void __init
board_io_mapping(void)
redwood5_map_io(void)
{
int i;
ppc4xx_map_io();
for (i = 0; i < 16; i++) {
unsigned long v, p;
......@@ -72,11 +70,11 @@ board_io_mapping(void)
}
void __init
board_setup_irq(void)
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
}
ppc4xx_init(r3, r4, r5, r6, r7);
void __init
board_init(void)
{
ppc_md.setup_arch = redwood5_setup_arch;
ppc_md.setup_io_mappings = redwood5_map_io;
}
arch/ppc/platforms/4xx/walnut.c
View file @ 80dbb53d
/*
*
* Copyrigh t(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
* Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
*
* Copyright 2000-2001 MontaVista Software Inc.
* Copyright 2000-2002 MontaVista Software Inc.
* Completed implementation.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
......@@ -14,13 +14,6 @@
* code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
* <dan@net4x.com>.
*
* History: 11/09/2001 - armin
* added board_init to add in additional instuctions needed during platfrom_init
*
* 01/22/2002 - Armin
* converted pci to ocp
*
*
*/
#include <linux/config.h>
#include <linux/init.h>
......@@ -39,13 +32,8 @@
#include <asm/page.h>
#include <asm/time.h>
#include <asm/io.h>
#include <platforms/4xx/ibm_ocp.h>
#ifdef CONFIG_PPC_RTC
#include <asm/ibm_ocp_pci.h>
#include <asm/todc.h>
#endif
#include "walnut.h"
#undef DEBUG
......@@ -82,8 +70,9 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
};
void __init
board_setup_arch(void)
walnut_setup_arch(void)
{
void *fpga_brdc;
unsigned char fpga_brdc_data;
void *fpga_enable;
......@@ -91,6 +80,8 @@ board_setup_arch(void)
void *fpga_status;
void *fpga_trigger;
ppc4xx_setup_arch();
kb_data = ioremap(WALNUT_PS2_BASE, 8);
if (!kb_data) {
printk(KERN_CRIT
......@@ -123,20 +114,19 @@ board_setup_arch(void)
writeb(0x3, fpga_trigger);
#ifdef CONFIG_PPC_RTC
/* RTC step for the walnut */
walnut_rtc_base = (void *) WALNUT_RTC_VADDR;
TODC_INIT(TODC_TYPE_DS1743, walnut_rtc_base, walnut_rtc_base,
walnut_rtc_base, 8);
#endif /* CONFIG_PPC_RTC */
/* Identify the system */
printk("IBM Walnut port (C) 2000-2002 MontaVista Software, Inc. (source@mvista.com)\n");
}
void __init
bios_fixup(struct pci_controller *hose, void *pcil0_base)
bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
{
#ifdef CONFIG_PCI
unsigned int bar_response, bar;
struct pcil0_regs *pcip;
/*
* Expected PCI mapping:
*
......@@ -155,7 +145,6 @@ bios_fixup(struct pci_controller *hose, void *pcil0_base)
#ifdef DEBUG
int i;
pcip = (struct pcil0_regs *) pcil0_base;
printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
printk("PCI bridge regs before fixup \n");
......@@ -170,8 +159,6 @@ bios_fixup(struct pci_controller *hose, void *pcil0_base)
printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
#else
pcip = (struct pcil0_regs *) pcil0_base;
#endif
/* added for IBM boot rom version 1.15 bios bar changes -AK */
......@@ -232,25 +219,28 @@ bios_fixup(struct pci_controller *hose, void *pcil0_base)
printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
#endif
#endif
}
void __init
board_io_mapping(void)
walnut_map_io(void)
{
ppc4xx_map_io();
io_block_mapping(WALNUT_RTC_VADDR,
WALNUT_RTC_PADDR, WALNUT_RTC_SIZE, _PAGE_IO);
}
void __init
board_setup_irq(void)
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
}
ppc4xx_init(r3, r4, r5, r6, r7);
void __init
board_init(void)
{
#ifdef CONFIG_PPC_RTC
ppc_md.setup_arch = walnut_setup_arch;
ppc_md.setup_io_mappings = walnut_map_io;
#ifdef CONFIG_GEN_RTC
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
......
arch/ppc/platforms/4xx/walnut.h
View file @ 80dbb53d
......@@ -60,10 +60,6 @@ extern void *walnut_rtc_base;
#define WALNUT_RTC_VADDR WALNUT_RTC_PADDR
#define WALNUT_RTC_SIZE ((uint)8*1024)
/* ps2 keyboard and mouse */
#define KEYBOARD_IRQ 25
#define AUX_IRQ 26
#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
#define BASE_BAUD 201600
#else
......
arch/ppc/syslib/Makefile
View file @ 80dbb53d
......@@ -12,14 +12,18 @@ endif
CFLAGS_prom_init.o += -mrelocatable-lib
CFLAGS_btext.o += -mrelocatable-lib
export-objs := ppc4xx_dma.o ppc4xx_pm.o
obj-$(CONFIG_PPCBUG_NVRAM) += prep_nvram.o
ifeq ($(CONFIG_4xx),y)
obj-$(CONFIG_4xx) += ppc4xx_setup.o ppc4xx_pic.o ppc4xx_serial.o
obj-$(CONFIG_PPC_RTC) += todc_time.o
obj-$(CONFIG_4xx) += ppc4xx_pic.o
obj-$(CONFIG_40x) += ppc4xx_setup.o
obj-$(CONFIG_GEN_RTC) += todc_time.o
obj-$(CONFIG_KGDB) += ppc4xx_kgdb.o
ifeq ($(CONFIG_40x),y)
obj-$(CONFIG_KGDB) += ppc4xx_kgdb.o
obj-$(CONFIG_405_DMA) += ppc405_dma.o
obj-$(CONFIG_PCI) += ppc405_pci.o indirect_pci.o pci_auto.o
obj-$(CONFIG_PM) += ppc4xx_pm.o
obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o ppc405_pci.o
endif
endif
obj-$(CONFIG_8xx) += m8xx_setup.o ppc8xx_pic.o
ifeq ($(CONFIG_8xx),y)
......
arch/ppc/syslib/ppc405_pci.c
View file @ 80dbb53d
......@@ -7,6 +7,7 @@
* Author: MontaVista Software, Inc. <source@mvista.com>
* Frank Rowand <frank_rowand@mvista.com>
* Debbie Chu <debbie_chu@mvista.com>
* Further modifications by Armin Kuster.
*
* Copyright 2000 MontaVista Software Inc.
*
......@@ -36,20 +37,16 @@
#include <asm/system.h>
#include <asm/machdep.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <asm/ocp.h>
#include <asm/ibm4xx.h>
#include <asm/pci-bridge.h>
#include <platforms/4xx/ibm_ocp.h>
#include <asm/ibm_ocp_pci.h>
#ifdef CONFIG_DEBUG_BRINGUP
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
extern void bios_fixup(struct pci_controller *, void *);
extern void bios_fixup(struct pci_controller *, struct pcil0_regs *);
extern int ppc405_map_irq(struct pci_dev *dev, unsigned char idsel,
unsigned char pin);
extern struct pcil0_regs *PCIL_ADDR[];
void
ppc405_pcibios_fixup_resources(struct pci_dev *dev)
......@@ -87,7 +84,7 @@ ppc405_pcibios_fixup_resources(struct pci_dev *dev)
KERN_ERR " fixup will be attempted later\n",
min_host_addr, i, max_host_addr,
dev->bus->number, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn), dev->name);
PCI_FUNC(dev->devfn), dev->slot.name);
/* force pcibios_assign_resources() to assign a new address */
res->end -= res->start;
......@@ -121,18 +118,21 @@ ppc4xx_find_bridges(void)
isa_mem_base = 0;
pci_dram_offset = 0;
#if (PSR_PCI_ARBIT_EN > 1)
/* Check if running in slave mode */
if ((mfdcr(DCRN_CHPSR) & PSR_PCI_ARBIT_EN) == 0) {
printk("Running as PCI slave, kernel PCI disabled !\n");
return;
}
#endif
/* Setup PCI32 hose */
hose_a = pcibios_alloc_controller();
if (!hose_a)
return;
setup_indirect_pci(hose_a, PPC405_PCI_CONFIG_ADDR,
PPC405_PCI_CONFIG_DATA);
pcip = ioremap((unsigned long) PCIL_ADDR[0], PAGE_SIZE);
pcip = ioremap(PPC4xx_PCI_LCFG_PADDR, PAGE_SIZE);
if (pcip != NULL) {
#if defined(CONFIG_BIOS_FIXUP)
......@@ -140,35 +140,34 @@ ppc4xx_find_bridges(void)
#endif
new_pmm_min = 0xffffffff;
for (reg_index = 0; reg_index < 3; reg_index++) {
tmp_size = in_le32((void *) &(pcip->pmm[reg_index].ma)); // *_PMM0MA
if (tmp_size & 0x1) {
tmp_addr = in_le32((void *) &(pcip->pmm[reg_index].pcila)); // *_PMM0PCILA
tmp_size = in_le32(&pcip->pmm[reg_index].ma); // mask & attrs
/* test the enable bit */
if ((tmp_size & 0x1) == 0)
continue;
tmp_addr = in_le32(&pcip->pmm[reg_index].pcila); // PCI addr
if (tmp_addr < PPC405_PCI_PHY_MEM_BASE) {
printk(KERN_DEBUG
"Disabling mapping to PCI mem addr 0x%8.8x\n",
tmp_addr);
out_le32((void *) &(pcip->pmm[reg_index].ma), tmp_size & ~1); // *_PMMOMA
} else {
tmp_addr = in_le32((void *) &(pcip->pmm[reg_index].la)); // *_PMMOLA
out_le32(&pcip->pmm[reg_index].ma, tmp_size & ~1); // *_PMMOMA
continue;
}
tmp_addr = in_le32(&pcip->pmm[reg_index].la); // *_PMMOLA
if (tmp_addr < new_pmm_min)
new_pmm_min = tmp_addr;
tmp_addr =
tmp_addr + (0xffffffff -
(tmp_size &
0xffffc000));
tmp_addr = tmp_addr +
(0xffffffff - (tmp_size & 0xffffc000));
if (tmp_addr > PPC405_PCI_UPPER_MEM) {
new_pmm_max = tmp_addr; // PPC405_PCI_UPPER_MEM
} else {
new_pmm_max =
PPC405_PCI_UPPER_MEM;
}
}
new_pmm_max = PPC405_PCI_UPPER_MEM;
}
} // for
iounmap(pcip);
}
hose_a->first_busno = 0;
hose_a->last_busno = 0xff;
hose_a->pci_mem_offset = 0;
......@@ -183,14 +182,14 @@ ppc4xx_find_bridges(void)
hose_a->io_base_phys = PPC405_PCI_PHY_IO_BASE;
hose_a->io_base_virt = ioremap(hose_a->io_base_phys, 0x10000);
hose_a->io_resource.start = 0;
hose_a->io_resource.end = PPC405_PCI_UPPER_IO-PPC405_PCI_LOWER_IO;
hose_a->io_resource.end = PPC405_PCI_UPPER_IO - PPC405_PCI_LOWER_IO;
hose_a->io_resource.flags = IORESOURCE_IO;
hose_a->io_resource.name = "PCI I/O";
hose_a->mem_resources[0].start = new_pmm_min;
hose_a->mem_resources[0].end = new_pmm_max;
hose_a->mem_resources[0].flags = IORESOURCE_MEM;
hose_a->mem_resources[0].name = "PCI Memory";
isa_io_base = (int)hose_a->io_base_virt;
isa_io_base = (int) hose_a->io_base_virt;
isa_mem_base = 0; /* ISA not implemented */
ISA_DMA_THRESHOLD = 0x00ffffff; /* ??? ISA not implemented */
......
arch/ppc/syslib/ppc4xx_pic.c
View file @ 80dbb53d
......@@ -38,6 +38,13 @@
/* Global Variables */
struct hw_interrupt_type *ppc4xx_pic;
/*
* We define 4xxIRQ_InitSenses table thusly:
* bit 0x1: sense, 1 for edge and 0 for level.
* bit 0x2: polarity, 0 for negative, 1 for positive.
*/
unsigned int ibm4xxPIC_NumInitSenses __initdata = 0;
unsigned char *ibm4xxPIC_InitSenses __initdata = NULL;
/* Six of one, half dozen of the other....#ifdefs, separate files,
* other tricks.....
......@@ -140,21 +147,42 @@ static void
ppc405_uic_enable(unsigned int irq)
{
int bit, word;
irq_desc_t *desc = irq_desc + irq;
bit = irq & 0x1f;
word = irq >> 5;
#ifdef UIC_DEBUG
printk("ppc405_uic_enable - irq %d word %d bit 0x%x\n",irq, word , bit);
printk("ppc405_uic_enable - irq %d word %d bit 0x%x\n", irq, word, bit);
#endif
ppc_cached_irq_mask[word] |= 1 << (31 - bit);
switch (word){
switch (word) {
case 0:
mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[word]);
if ((mfdcr(DCRN_UIC_TR(UIC0)) & (1 << (31 - bit))) == 0)
desc->status |= IRQ_LEVEL;
else
/* lets hope this works since in linux/irq.h
* there is no define for EDGE and it's assumed
* once you set status to LEVEL you would not
* want to change it - Armin
*/
desc->status = desc->status & ~IRQ_LEVEL;
break;
case 1:
mtdcr(DCRN_UIC_ER(UIC1), ppc_cached_irq_mask[word]);
if ((mfdcr(DCRN_UIC_TR(UIC1)) & (1 << (31 - bit))) == 0)
desc->status |= IRQ_LEVEL;
else
/* lets hope this works since in linux/irq.h
* there is no define for EDGE and it's assumed
* once you set status to LEVEL you would not
* want to change it - Armin
*/
desc->status = desc->status & ~IRQ_LEVEL;
break;
}
}
static void
......@@ -165,10 +193,11 @@ ppc405_uic_disable(unsigned int irq)
bit = irq & 0x1f;
word = irq >> 5;
#ifdef UIC_DEBUG
printk("ppc405_uic_disable - irq %d word %d bit 0x%x\n",irq, word , bit);
printk("ppc405_uic_disable - irq %d word %d bit 0x%x\n", irq, word,
bit);
#endif
ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
switch (word){
switch (word) {
case 0:
mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[word]);
break;
......@@ -187,10 +216,11 @@ ppc405_uic_disable_and_ack(unsigned int irq)
word = irq >> 5;
#ifdef UIC_DEBUG
printk("ppc405_uic_disable_and_ack - irq %d word %d bit 0x%x\n",irq, word , bit);
printk("ppc405_uic_disable_and_ack - irq %d word %d bit 0x%x\n", irq,
word, bit);
#endif
ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
switch (word){
switch (word) {
case 0:
mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[word]);
mtdcr(DCRN_UIC_SR(UIC0), (1 << (31 - bit)));
......@@ -212,10 +242,10 @@ ppc405_uic_end(unsigned int irq)
word = irq >> 5;
#ifdef UIC_DEBUG
printk("ppc405_uic_end - irq %d word %d bit 0x%x\n",irq, word , bit);
printk("ppc405_uic_end - irq %d word %d bit 0x%x\n", irq, word, bit);
#endif
switch (word){
switch (word) {
case 0:
tr_bits = mfdcr(DCRN_UIC_TR(UIC0));
break;
......@@ -226,7 +256,7 @@ ppc405_uic_end(unsigned int irq)
if ((tr_bits & (1 << (31 - bit))) == 0) {
/* level trigger */
switch (word){
switch (word) {
case 0:
mtdcr(DCRN_UIC_SR(UIC0), 1 << (31 - bit));
break;
......@@ -236,10 +266,9 @@ ppc405_uic_end(unsigned int irq)
}
}
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))
&& irq_desc[irq].action) {
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
ppc_cached_irq_mask[word] |= 1 << (31 - bit);
switch (word){
switch (word) {
case 0:
mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[word]);
break;
......@@ -279,14 +308,14 @@ ppc405_pic_get_irq(struct pt_regs *regs)
bits = mfdcr(DCRN_UIC_MSR(UIC0));
#if (NR_UICS > 1)
if (bits & UIC_CASCADE_MASK){
if (bits & UIC_CASCADE_MASK) {
bits = mfdcr(DCRN_UIC_MSR(UIC1));
cas_irq = 32 - ffs(bits);
irq = 32 + cas_irq;
} else {
irq = 32 - ffs(bits);
if (irq == 32)
irq= -1;
irq = -1;
}
#else
/*
......@@ -301,16 +330,82 @@ ppc405_pic_get_irq(struct pt_regs *regs)
irq = -1;
#ifdef UIC_DEBUG
printk("ppc405_pic_get_irq - irq %d bit 0x%x\n",irq, bits);
printk("ppc405_pic_get_irq - irq %d bit 0x%x\n", irq, bits);
#endif
return (irq);
}
#endif
void __init
ppc4xx_extpic_init(void)
{
/* set polarity
* 1 = default/pos/rising , 0= neg/falling internal
* 1 = neg/falling , 0= pos/rising external
* Sense
* 0 = default level internal
* 0 = level, 1 = edge external
*/
unsigned int sense, irq;
int bit, word;
unsigned long ppc_cached_sense_mask[NR_MASK_WORDS];
unsigned long ppc_cached_pol_mask[NR_MASK_WORDS];
ppc_cached_sense_mask[0] = 0;
ppc_cached_sense_mask[1] = 0;
ppc_cached_pol_mask[0] = 0;
ppc_cached_pol_mask[1] = 0;
for (irq = 0; irq < NR_IRQS; irq++) {
bit = irq & 0x1f;
word = irq >> 5;
sense =
(irq <
ibm4xxPIC_NumInitSenses) ? ibm4xxPIC_InitSenses[irq] : 3;
#ifdef PPC4xx_PIC_DEBUG
printk("PPC4xx_picext %d word:%x bit:%x sense:%x", irq, word,
bit, sense);
#endif
ppc_cached_sense_mask[word] |=
(sense & IRQ_SENSE_MASK) << (31 - bit);
ppc_cached_pol_mask[word] |=
((sense & IRQ_POLARITY_MASK) >> 1) << (31 - bit);
switch (word) {
case 0:
#ifdef PPC4xx_PIC_DEBUG
printk("Pol %x ", mfdcr(DCRN_UIC_PR(UIC0)));
printk("Level %x\n", mfdcr(DCRN_UIC_TR(UIC0)));
#endif
/* polarity setting */
mtdcr(DCRN_UIC_PR(UIC0), ppc_cached_pol_mask[word]);
/* Level setting */
mtdcr(DCRN_UIC_TR(UIC0), ppc_cached_sense_mask[word]);
break;
case 1:
#ifdef PPC4xx_PIC_DEBUG
printk("Pol %x ", mfdcr(DCRN_UIC_PR(UIC1)));
printk("Level %x\n", mfdcr(DCRN_UIC_TR(UIC1)));
#endif
/* polarity setting */
mtdcr(DCRN_UIC_PR(UIC1), ppc_cached_pol_mask[word]);
/* Level setting */
mtdcr(DCRN_UIC_TR(UIC1), ppc_cached_sense_mask[word]);
break;
}
}
}
void __init
ppc4xx_pic_init(void)
{
/*
* Disable all external interrupts until they are
* explicity requested.
......@@ -325,24 +420,25 @@ ppc4xx_pic_init(void)
ppc_md.get_irq = ppc403_pic_get_irq;
#else
#if (NR_UICS > 1)
ppc_cached_irq_mask[0] |= 1 << (31 - UIC0_UIC1NC ); /* enable cascading interrupt */
mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
ppc_cached_irq_mask[0] |= 1 << (31 - UIC0_UIC1NC); /* enable cascading interrupt */
mtdcr(DCRN_UIC_ER(UIC1), ppc_cached_irq_mask[1]);
/* Set all interrupts to non-critical.
*/
mtdcr(DCRN_UIC_CR(UIC0), 0);
mtdcr(DCRN_UIC_CR(UIC1), 0);
#else
#endif
mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
/* Set all interrupts to non-critical.
*/
mtdcr(DCRN_UIC_CR(UIC0), 0);
if (ibm4xxPIC_InitSenses != NULL)
ppc4xx_extpic_init();
/* Clear any pending interrupts */
#if (NR_UICS > 1)
mtdcr(DCRN_UIC_SR(UIC1), 0xffffffff);
#endif
mtdcr(DCRN_UIC_SR(UIC0), 0xffffffff);
ppc4xx_pic = &ppc405_uic;
ppc_md.get_irq = ppc405_pic_get_irq;
#endif
}
arch/ppc/syslib/ppc4xx_setup.c
View file @ 80dbb53d
......@@ -7,23 +7,10 @@
* Author: MontaVista Software, Inc. <source@mvista.com>
* Frank Rowand <frank_rowand@mvista.com>
* Debbie Chu <debbie_chu@mvista.com>
* Further modifications by Armin Kuster
*
* Module name: ppc4xx_setup.c
*
* Description:
* Architecture- / platform-specific boot-time initialization code for
* IBM PowerPC 4xx based boards. Adapted from original
* code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
* <dan@net4x.com>.
*
* History: 11/09/2001 - armin
* rename board_setup_nvram_access to board_init. board_init is
* used for all other board specific instructions needed during
* platform_init.
* moved RTC to board.c files
* moved VT/FB to board.c files
* moved r/w4 ide to redwood.c
*
*/
#include <linux/config.h>
......@@ -63,19 +50,12 @@ extern void ppc4xx_wdt_heartbeat(void);
extern int wdt_enable;
extern unsigned long wdt_period;
/* Board specific functions */
extern void board_setup_arch(void);
extern void board_io_mapping(void);
extern void board_setup_irq(void);
extern void board_init(void);
/* Global Variables */
unsigned char __res[sizeof (bd_t)];
bd_t __res;
static void __init
void __init
ppc4xx_setup_arch(void)
{
/* Setup PCI host bridges */
#ifdef CONFIG_PCI
......@@ -85,8 +65,6 @@ ppc4xx_setup_arch(void)
#if defined(CONFIG_FB)
conswitchp = &dummy_con;
#endif
board_setup_arch();
}
/*
......@@ -97,9 +75,7 @@ ppc4xx_setup_arch(void)
static int
ppc4xx_show_percpuinfo(struct seq_file *m, int i)
{
bd_t *bip = (bd_t *) __res;
seq_printf(m, "clock\t\t: %ldMHz\n", (long) bip->bi_intfreq / 1000000);
seq_printf(m, "clock\t\t: %ldMHz\n", (long)__res.bi_intfreq / 1000000);
return 0;
}
......@@ -111,7 +87,7 @@ ppc4xx_show_percpuinfo(struct seq_file *m, int i)
static int
ppc4xx_show_cpuinfo(struct seq_file *m)
{
bd_t *bip = (bd_t *) __res;
bd_t *bip = &__res;
seq_printf(m, "machine\t\t: %s\n", PPC4xx_MACHINE_NAME);
seq_printf(m, "plb bus clock\t: %ldMHz\n",
......@@ -130,13 +106,11 @@ ppc4xx_show_cpuinfo(struct seq_file *m)
static unsigned long __init
ppc4xx_find_end_of_memory(void)
{
bd_t *bip = (bd_t *) __res;
return ((unsigned long) bip->bi_memsize);
return ((unsigned long) __res.bi_memsize);
}
static void __init
m4xx_map_io(void)
void __init
ppc4xx_map_io(void)
{
io_block_mapping(PPC4xx_ONB_IO_VADDR,
PPC4xx_ONB_IO_PADDR, PPC4xx_ONB_IO_SIZE, _PAGE_IO);
......@@ -148,10 +122,9 @@ m4xx_map_io(void)
io_block_mapping(PPC4xx_PCI_LCFG_VADDR,
PPC4xx_PCI_LCFG_PADDR, PPC4xx_PCI_LCFG_SIZE, _PAGE_IO);
#endif
board_io_mapping();
}
static void __init
void __init
ppc4xx_init_IRQ(void)
{
int i;
......@@ -160,10 +133,6 @@ ppc4xx_init_IRQ(void)
for (i = 0; i < NR_IRQS; i++)
irq_desc[i].handler = ppc4xx_pic;
/* give board specific code a chance to setup things */
board_setup_irq();
return;
}
static void
......@@ -199,19 +168,13 @@ static void __init
ppc4xx_calibrate_decr(void)
{
unsigned int freq;
bd_t *bip = (bd_t *) __res;
bd_t *bip = &__res;
#if defined(CONFIG_WALNUT) || defined(CONFIG_CEDER)
#if defined(CONFIG_WALNUT) || defined(CONFIG_CEDER)|| defined(CONFIG_ASH) || defined(CONFIG_SYCAMORE)
/* Walnut boot rom sets DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */
mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE);
#endif
#ifdef CONFIG_REDWOOD_5
freq = bip->bi_tbfreq;
#else
freq = bip->bi_intfreq;
#endif
tb_ticks_per_jiffy = freq / HZ;
tb_to_us = mulhwu_scale_factor(freq, 1000000);
......@@ -230,20 +193,40 @@ ppc4xx_calibrate_decr(void)
/* Set the PIT reload value and just let it run. */
mtspr(SPRN_PIT, tb_ticks_per_jiffy);
}
#ifdef CONFIG_SERIAL_TEXT_DEBUG
#ifdef CONFIG_DEBUG_TEXT
/* We assume that the UART has already been initialized by the
firmware or the boot loader */
static void
ppc4xx_progress(char *s, unsigned short hex)
serial_putc(u8 * com_port, unsigned char c)
{
printk("%s\n\r", s);
while ((readb(com_port + (UART_LSR)) & UART_LSR_THRE) == 0) ;
writeb(c, com_port);
}
static void
ppc4xx_progress(char *s, unsigned short hex)
{
char c;
#ifdef SERIAL_DEBUG_IO_BASE
u8 *com_port = (u8 *) SERIAL_DEBUG_IO_BASE;
while ((c = *s++) != '\0') {
serial_putc(com_port, c);
}
serial_putc(com_port, '\r');
serial_putc(com_port, '\n');
#else
printk("%s\r\n");
#endif
}
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
/*
* IDE stuff.
* should be generic for every IDE PCI chipset
*/
#ifdef CONFIG_PCI
#if defined(CONFIG_PCI) && defined(CONFIG_IDE)
static void
ppc4xx_ide_init_hwif_ports(hw_regs_t * hw, ide_ioreg_t data_port,
ide_ioreg_t ctrl_port, int *irq)
......@@ -255,7 +238,7 @@ ppc4xx_ide_init_hwif_ports(hw_regs_t * hw, ide_ioreg_t data_port,
hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
}
#endif
#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */
TODC_ALLOC();
......@@ -272,7 +255,7 @@ TODC_ALLOC();
* command-line parameters.
*/
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
parse_bootinfo(find_bootinfo());
......@@ -281,11 +264,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
* If we were passed in a board information, copy it into the
* residual data area.
*/
if (r3) {
memcpy((void *) __res, (void *) (r3 + KERNELBASE),
sizeof (bd_t));
if (r3)
__res = *(bd_t *)(r3 + KERNELBASE);
}
#if defined(CONFIG_BLK_DEV_INITRD)
/*
* If the init RAM disk has been configured in, and there's a valid
......@@ -320,7 +301,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
}
#endif
/* Initialize machine-dependency vectors */
/* Initialize machine-dependent vectors */
ppc_md.setup_arch = ppc4xx_setup_arch;
ppc_md.show_percpuinfo = ppc4xx_show_percpuinfo;
......@@ -339,9 +320,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ppc_md.heartbeat_count = 0;
ppc_md.find_end_of_memory = ppc4xx_find_end_of_memory;
ppc_md.setup_io_mappings = m4xx_map_io;
ppc_md.setup_io_mappings = ppc4xx_map_io;
#ifdef CONFIG_DEBUG_TEXT
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = ppc4xx_progress;
#endif
......@@ -349,12 +330,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
** m8xx_setup.c, prep_setup.c use
** defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
*/
#ifdef CONFIG_IDE
# ifdef CONFIG_PCI
#if defined(CONFIG_PCI) && defined(CONFIG_IDE)
ppc_ide_md.ide_init_hwif = ppc4xx_ide_init_hwif_ports;
# endif
#endif
board_init();
return;
#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */
}
include/asm-ppc/ibm403.h
View file @ 80dbb53d
/*
* ibm403.h
*
* This was dirived from the ibm4xx.h and all 403 specific definitions
* where moved here.
* This was derived from the ibm4xx.h and all 403 specific definitions
* were moved here.
*
* Armin Kuster <akuster@mvista.com>
* Tom Rini <trini@mvista.com>
......@@ -30,11 +30,6 @@
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Version 1.0 Oct 10, 2001 - A. Kuster
* Initial version - moved 403 specific out of ibm4xx.h
* Version 1.1 Oct 25, 2001 - T. Rini
* Lots of cleanups.
*/
......
include/asm-ppc/ibm405.h
View file @ 80dbb53d
......@@ -29,12 +29,6 @@
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Version 1.0 (02/01/17) - A. Kuster
* Initial version - moved 405 specific out of the other core.h's
*
* Version 1.0 (02/08/02) - A. Kuster
* removed DCRN_UIC1_BASE to NP405L & H
*/
#ifdef __KERNEL__
......@@ -56,6 +50,11 @@
#define ET_BUSERR 4
#define ET_BUSTO 6
/* Clock and power management shifts for emacs */
#define IBM_CPM_EMMII 0 /* Shift value for MII */
#define IBM_CPM_EMRX 1 /* Shift value for recv */
#define IBM_CPM_EMTX 2 /* Shift value for MAC */
#ifdef DCRN_CHCR_BASE
#define DCRN_CHCR0 (DCRN_CHCR_BASE + 0x0) /* Chip Control Register 1 */
#define DCRN_CHCR1 (DCRN_CHCR_BASE + 0x1) /* Chip Control Register 2 */
......@@ -234,16 +233,6 @@
#define DCRN_MALRCBS0(base) ((base) + 0x60) /* Channel Rx 0 Channel Buffer Size */
#define DCRN_MALRCBS1(base) ((base) + 0x61) /* Channel Rx 1 Channel Buffer Size */
/* EMAC DCRN's */
#define DCRN_MALRXCTP2R(base) ((base) + 0x42) /* Channel Rx 2 Channel Table Pointer */
#define DCRN_MALRXCTP3R(base) ((base) + 0x43) /* Channel Rx 3 Channel Table Pointer */
#define DCRN_MALTXCTP4R(base) ((base) + 0x24) /* Channel Tx 4 Channel Table Pointer */
#define DCRN_MALTXCTP5R(base) ((base) + 0x25) /* Channel Tx 5 Channel Table Pointer */
#define DCRN_MALTXCTP6R(base) ((base) + 0x26) /* Channel Tx 6 Channel Table Pointer */
#define DCRN_MALTXCTP7R(base) ((base) + 0x27) /* Channel Tx 7 Channel Table Pointer */
#define DCRN_MALRCBS2(base) ((base) + 0x62) /* Channel Rx 2 Channel Buffer Size */
#define DCRN_MALRCBS3(base) ((base) + 0x63) /* Channel Rx 3 Channel Buffer Size */
/* DCRN_MALCR */
#define MALCR_MMSR 0x80000000 /* MAL Software reset */
#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */
......
include/asm-ppc/ibm4xx.h
View file @ 80dbb53d
......@@ -16,14 +16,56 @@
#include <linux/config.h>
#ifdef CONFIG_4xx
#ifndef __ASSEMBLY__
/* Device Control Registers */
#define stringify(s) tostring(s)
#define tostring(s) #s
#define mfdcr(rn) mfdcr_or_dflt(rn, 0)
#define mfdcr_or_dflt(rn,default_rval) \
({unsigned int rval; \
if (rn == 0) \
rval = default_rval; \
else \
asm volatile("mfdcr %0," stringify(rn) : "=r" (rval)); \
rval;})
#define mtdcr(rn, v) \
do { \
if (rn != 0) \
asm volatile("mtdcr " stringify(rn) ",%0" : : "r" (v)); \
} while (0)
/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
#define mfdcri(base, reg) \
({ \
mtdcr(base##_CFGADDR, base##_##reg); \
mfdcr(base##_CFGDATA); \
})
#define mtdcri(base, reg, data) \
do { \
mtdcr(base##_CFGADDR, base##_##reg); \
mtdcr(base##_CFGDATA, data); \
} while (0)
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_4xx */
#ifdef CONFIG_40x
#if defined(CONFIG_ASH)
#include <platforms/4xx/ash.h>
#endif
#if defined (CONFIG_CEDER)
#include <platforms/4xx/ceder.h>
#if defined (CONFIG_CEDAR)
#include <platforms/4xx/cedar.h>
#endif
#if defined(CONFIG_CPCI405)
......@@ -50,12 +92,26 @@
#include <platforms/4xx/walnut.h>
#endif
#ifndef __ASSEMBLY__
/*
* The "residual" board information structure the boot loader passes
* into the kernel.
*/
extern bd_t __res;
void ppc4xx_setup_arch(void);
void ppc4xx_map_io(void);
void ppc4xx_init_IRQ(void);
void ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7);
#endif
#ifndef PPC4xx_MACHINE_NAME
#define PPC4xx_MACHINE_NAME "Unidentified 4xx class"
#endif
/* IO_BASE is for PCI I/O.
* ISA not supported, just here to resolve copilation.
*/
......@@ -66,33 +122,7 @@
#define PCI_DRAM_OFFSET 0
#endif
/*
* The "residual" board information structure the boot loader passes
* into the kernel.
*/
#ifndef __ASSEMBLY__
extern unsigned char __res[];
/* Device Control Registers */
#define stringify(s) tostring(s)
#define tostring(s) #s
#define mfdcr(rn) mfdcr_or_dflt(rn, 0)
#define mfdcr_or_dflt(rn,default_rval) \
({unsigned int rval; \
if (rn == 0) \
rval = default_rval; \
else \
asm volatile("mfdcr %0," stringify(rn) : "=r" (rval)); \
rval;})
#define mtdcr(rn, v) \
{if (rn != 0) \
asm volatile("mtdcr " stringify(rn) ",%0" : : "r" (v));}
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_40x */
#endif /* __ASM_IBM4XX_H__ */
#endif /* __KERNEL__ */
arch/ppc/platforms/4xx/ibm_ocp.h → include/asm-ppc/ibm_ocp_pci.h
View file @ 80dbb53d
/*
* ibm_ocp.h
* ibm_ocp_pci.h
*
* This was dirived from the ppc4xx.h and all 405GP specific definition and board
* inclusions where moved here.
* This was derived from the ibm_ocp.h
*
* Current Maintainer
* Armin Kuster akuster@mvista.com
* Nov, 2001
* AUg, 2002
*
*
* Copyright 2001 MontaVista Softare Inc.
* Copyright 2001-2002 MontaVista Softare Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -30,19 +29,13 @@
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Version 1.0 (01/11/26) - A. Kuster
* Initial version -
*/
#ifdef __KERNEL__
#ifndef __ASM_IBM_OCP_H__
#define __ASM_IBM_OCP_H__
#ifndef __ASSEMBLY__
#include <linux/types.h>
#ifndef __ASM_IBM_OCP_PCI_H__
#define __ASM_IBM_OCP_PCI_H__
/* PCI 32 */
/* PCI 32 */
struct pmm_regs {
u32 la;
......@@ -59,134 +52,5 @@ typedef struct pcil0_regs {
u32 ptm2la;
} pci0_t;
/* Serial Ports */
#define thr rbr
#define iir fcr
#define dll rbr
#define dlm ier
typedef struct NS16550 {
u8 rbr; /* 0 */
u8 ier; /* 1 */
u8 fcr; /* 2 */
u8 lcr; /* 3 */
u8 mcr; /* 4 */
u8 lsr; /* 5 */
u8 msr; /* 6 */
u8 scr; /* 7 */
} uart_t;
/* I2c */
typedef struct iic_regs {
u16 mdbuf;
u16 sbbuf;
u8 lmadr;
u8 hmadr;
u8 cntl;
u8 mdcntl;
u8 sts;
u8 extsts;
u8 lsadr;
u8 hsadr;
u8 clkdiv;
u8 intmsk;
u8 xfrcnt;
u8 xtcntlss;
u8 directcntl;
} iic_t;
/* OPB arbiter */
typedef struct opb {
u8 pr;
u8 cr;
} opb_t;
/* General purpose i/o */
typedef struct gpio_regs {
u32 or;
u32 tcr;
u32 pad[4];
u32 odr;
u32 ir;
} gpio_t;
/* Emac */
typedef struct emac_regs {
volatile u32 em0mr0;
volatile u32 em0mr1;
volatile u32 em0tmr0;
volatile u32 em0tmr1;
volatile u32 em0rmr;
volatile u32 em0isr;
volatile u32 em0iser;
volatile u32 em0iahr;
volatile u32 em0ialr;
volatile u32 em0vtpid;
volatile u32 em0vtci;
volatile u32 em0ptr;
volatile u32 em0iaht1;
volatile u32 em0iaht2;
volatile u32 em0iaht3;
volatile u32 em0iaht4;
volatile u32 em0gaht1;
volatile u32 em0gaht2;
volatile u32 em0gaht3;
volatile u32 em0gaht4;
volatile u32 em0lsal;
volatile u32 em0lsah;
volatile u32 em0ipgvr;
volatile u32 em0stacr;
volatile u32 em0trtr;
volatile u32 em0rwmr;
} emac_t;
/* ZMII bridge */
typedef struct zmii_regs {
u32 fer; /* Function enable reg */
u32 ssr; /* Spedd select reg */
u32 smiirs; /* SMII status reg */
} zmii_t;
/* Structure of the memory mapped IDE control.
*/
typedef struct ide_regs {
unsigned int si_stat; /* IDE status */
unsigned int si_intenable; /* IDE interrupt enable */
unsigned int si_control; /* IDE control */
unsigned int pad0[0x3d];
unsigned int si_c0rt; /* Chan 0 Register transfer timing */
unsigned int si_c0fpt; /* Chan 0 Fast PIO transfer timing */
unsigned int si_c0timo; /* Chan 0 timeout */
unsigned int pad1[2];
unsigned int si_c0d0u; /* Chan 0 UDMA transfer timing */
#define si_c0d0m si_c0d0u /* Chan 0 Multiword DMA timing */
unsigned int pad2;
unsigned int si_c0d1u; /* Chan 0 dev 1 UDMA timing */
#define si_c0d1m si_c0d1u /* Chan 0 dev 1 Multiword DMA timing */
unsigned int si_c0c; /* Chan 0 Control */
unsigned int si_c0s0; /* Chan 0 Status 0 */
unsigned int si_c0ie; /* Chan 0 Interrupt Enable */
unsigned int si_c0s1; /* Chan 0 Status 0 */
unsigned int pad4[4];
unsigned int si_c0dcm; /* Chan 0 DMA Command */
unsigned int si_c0tb; /* Chan 0 PRD Table base address */
unsigned int si_c0dct; /* Chan 0 DMA Count */
unsigned int si_c0da; /* Chan 0 DMA Address */
unsigned int si_c0sr; /* Chan 0 Slew Rate Output Control */
unsigned char pad5[0xa2];
unsigned short si_c0adc; /* Chan 0 Alt status/control */
unsigned char si_c0d; /* Chan 0 data */
unsigned char si_c0ef; /* Chan 0 error/features */
unsigned char si_c0sct; /* Chan 0 sector count */
unsigned char si_c0sn; /* Chan 0 sector number */
unsigned char si_c0cl; /* Chan 0 cylinder low */
unsigned char si_c0ch; /* Chan 0 cylinder high */
unsigned char si_c0dh; /* Chan 0 device/head */
unsigned char si_c0scm; /* Chan 0 status/command */
} ide_t;
#endif /* __ASSEMBLY__ */
#endif /* __ASM_IBM_OCP_H__ */
#endif /* __ASM_IBM_OCP_PCI_H__ */
#endif /* __KERNEL__ */
include/asm-ppc/ocp.h 0 → 100644
View file @ 80dbb53d
/*
* ocp.h
*
*
* Current Maintainer
* Armin Kuster akuster@pacbell.net
* Jan, 2002
*
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifdef __KERNEL__
#ifndef __OCP_H__
#define __OCP_H__
#include <linux/list.h>
#include <linux/config.h>
#include <linux/device.h>
#include <linux/devfs_fs_kernel.h>
#include <asm/ocp_ids.h>
#include <asm/mmu.h> /* For phys_addr_t */
#undef DEBUG
/* #define DEBUG*/
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
#define OCP_IRQ_NA -1 /* used when ocp device does not have an irq */
#define OCP_IRQ_MUL -2 /* used for ocp devices with multiple irqs */
#define OCP_NULL_TYPE 0 /* used to mark end of list */
#define OCP_DEV_NA -1
#define OCP_CPM_NA 0 /* No Clock or Power Management avaliable */
#define OCP_ANY_ID (~0)
extern struct list_head ocp_root_buses;
extern struct list_head ocp_devices;
struct ocp_device_id {
unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
char name[16];
char desc[50];
unsigned long driver_data; /* Data private to the driver */
};
struct func_info {
char name[16];
char desc[50];
};
struct ocp_def {
unsigned int vendor;
unsigned int device;
phys_addr_t paddr;
int irq;
unsigned long pm;
};
/* Struct for single ocp device managment */
struct ocp_device {
struct list_head global_list;
unsigned int num; /* instance of device */
char name[80]; /* device name */
unsigned int vendor;
unsigned int device;
phys_addr_t paddr;
int irq;
unsigned long pm;
void *ocpdev; /* driver data for this device */
struct ocp_driver *driver;
u32 current_state; /* Current operating state. In ACPI-speak,
this is D0-D3, D0 being fully functional,
and D3 being off. */
struct device dev;
};
struct ocp_driver {
struct list_head node;
char *name;
const struct ocp_device_id *id_table; /* NULL if wants all devices */
int (*probe) (struct ocp_device *dev); /* New device inserted */
void (*remove) (struct ocp_device *dev); /* Device removed (NULL if not a hot-plug capable driver) */
int (*save_state) (struct ocp_device *dev, u32 state); /* Save Device Context */
int (*suspend) (struct ocp_device *dev, u32 state); /* Device suspended */
int (*resume) (struct ocp_device *dev); /* Device woken up */
int (*enable_wake) (struct ocp_device *dev, u32 state, int enable); /* Enable wake event */
struct device_driver driver;
};
#define to_ocp_dev(n) container_of(n, struct ocp_device, dev)
#define to_ocp_driver(n) container_of(n, struct ocp_driver, driver)
extern int ocp_register_driver(struct ocp_driver *drv);
extern void ocp_unregister_driver(struct ocp_driver *drv);
#define ocp_dev_g(n) list_entry(n, struct ocp_device, global_list)
#define ocp_for_each_dev(dev) \
for(dev = ocp_dev_g(ocp_devices.next); dev != ocp_dev_g(&ocp_devices); dev = ocp_dev_g(dev->global_list.next))
/* Similar to the helpers above, these manipulate per-ocp_dev
* driver-specific data. Currently stored as ocp_dev::ocpdev,
* a void pointer, but it is not present on older kernels.
*/
static inline void *
ocp_get_drvdata(struct ocp_device *pdev)
{
return pdev->ocpdev;
}
static inline void
ocp_set_drvdata(struct ocp_device *pdev, void *data)
{
pdev->ocpdev = data;
}
/*
* a helper function which helps ensure correct pci_driver
* setup and cleanup for commonly-encountered hotplug/modular cases
*
* This MUST stay in a header, as it checks for -DMODULE
*/
static inline int ocp_module_init(struct ocp_driver *drv)
{
int rc = ocp_register_driver(drv);
if (rc > 0)
return 0;
/* iff CONFIG_HOTPLUG and built into kernel, we should
* leave the driver around for future hotplug events.
* For the module case, a hotplug daemon of some sort
* should load a module in response to an insert event. */
#if defined(CONFIG_HOTPLUG) && !defined(MODULE)
if (rc == 0)
return 0;
#else
if (rc == 0)
rc = -ENODEV;
#endif
/* if we get here, we need to clean up pci driver instance
* and return some sort of error */
ocp_unregister_driver (drv);
return rc;
}
#if defined (CONFIG_PM)
/*
* This is right for the IBM 405 and 440 but will need to be
* generalized if the OCP stuff gets used on other processors.
*/
static inline void
ocp_force_power_off(struct ocp_device *odev)
{
mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) | odev->pm);
}
static inline void
ocp_force_power_on(struct ocp_device *odev)
{
mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) & ~odev->pm);
}
#else
#define ocp_force_power_off(x) (void)(x)
#define ocp_force_power_on(x) (void)(x)
#endif
extern void ocp_init(void);
extern struct bus_type ocp_bus_type;
extern struct ocp_device *ocp_get_dev(unsigned int device, int index);
extern unsigned int ocp_get_num(unsigned int device);
extern int ocp_generic_suspend(struct ocp_device *pdev, u32 state);
extern int ocp_generic_resume(struct ocp_device *pdev);
#endif /* __OCP_H__ */
#endif /* __KERNEL__ */
include/asm-ppc/ocp_ids.h 0 → 100644
View file @ 80dbb53d
/*
* FILE NAME: ocp_ids.h
*
* BRIEF MODULE DESCRIPTION:
* OCP device ids based on the ideas from PCI
*
* Maintained by: Armin <akuster@mvista.com>
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Version 1.0 08/22/02 -Armin
* initial release
*/
/*
* Vender device
* [xxxx] [xxxx]
*
* Keep in order, please
*/
/* Vendor IDs 0x0001 - 0xFFFF copied from pci_ids.h */
#define OCP_VENDOR_INVALID 0x0000
#define OCP_VENDOR_ARM 0x0004
#define OCP_VENDOR_IBM 0x1014
#define OCP_VENDOR_MOTOROLA 0x1057
#define OCP_VENDOR_XILINX 0x10ee
#define OCP_VENDOR_UNKNOWN 0xFFFF
/* device identification */
/* define type */
#define OCP_FUNC_INVALID 0x0000
/* system 0x0001 - 0x001F */
#define OCP_FUNC_UIC 0x0001
/* Timers 0x0020 - 0x002F */
#define OCP_FUNC_GPT 0x0020 /* General purpose timers */
#define OCP_FUNC_RTC 0x0021
/* Serial 0x0030 - 0x006F*/
#define OCP_FUNC_16550 0x0031
#define OCP_FUNC_SSP 0x0032 /* sync serial port */
#define OCP_FUNC_SCP 0x0033 /* serial controller port */
#define OCP_FUNC_SCC 0x0034 /* serial contoller */
#define OCP_FUNC_SCI 0x0035 /* Smart card */
#define OCP_FUNC_IIC 0x0040
#define OCP_FUNC_USB 0x0050
#define OCP_FUNC_IR 0x0060
/* Memory devices 0x0090 - 0x009F */
#define OCP_FUNC_SDRAM 0x0091
#define OCP_FUNC_DMA 0x0092
/* Display 0x00A0 - 0x00AF */
#define OCP_FUNC_VIDEO 0x00A0
#define OCP_FUNC_LED 0x00A1
#define OCP_FUNC_LCD 0x00A2
/* Sound 0x00B0 - 0x00BF */
#define OCP_FUNC_AUDIO 0x00B0
/* Mass Storage 0x00C0 - 0xxCF */
#define OCP_FUNC_IDE 0x00C0
/* Misc 0x00D0 - 0x00DF*/
#define OCP_FUNC_GPIO 0x00D0
#define OCP_FUNC_ZMII 0x00D1
/* Network 0x0200 - 0x02FF */
#define OCP_FUNC_EMAC 0x0200
/* Bridge devices 0xE00 - 0xEFF */
#define OCP_FUNC_HOST 0x0E00
#define OCP_FUNC_DCR 0x0E01
#define OCP_FUNC_OPB 0x0E02
#define OCP_FUNC_PHY 0x0E03
#define OCP_FUNC_EXT 0x0E04
#define OCP_FUNC_PCI 0x0E05
#define OCP_FUNC_PLB 0x0E06
#define OCP_FUNC_UNKNOWN 0xFFFF
include/asm-ppc/ppc4xx_pic.h
View file @ 80dbb53d
......@@ -17,7 +17,8 @@
/* External Global Variables */
extern struct hw_interrupt_type *ppc4xx_pic;
extern unsigned int ibm4xxPIC_NumInitSenses;
extern unsigned char *ibm4xxPIC_InitSenses;
/* Function Prototypes */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7