Skip to content

L
linux
Commit 81f6075e authored by Evgeniy Polyakov's avatar Evgeniy Polyakov Committed by Greg Kroah-Hartman
Browse files
Options

[PATCH] w1: Replace dscore and ds_w1_bridge with ds2490 driver.

parent f522d239
Hide whitespace changes
Inline Side-by-side
Showing with 321 additions and 505 deletions
Documentation/w1/masters/ds2490 0 → 100644
View file @ 81f6075e
Kernel driver ds2490
====================
Supported chips:
* Maxim DS2490 based
Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Description
-----------
The Maixm/Dallas Semiconductor DS2490 is a chip
which allows to build USB <-> W1 bridges.
DS9490(R) is a USB <-> W1 bus master device
which has 0x81 family ID integrated chip and DS2490
low-level operational chip.
drivers/w1/masters/Kconfig
View file @ 81f6075e
......@@ -15,24 +15,15 @@ config W1_MASTER_MATROX
This support is also available as a module. If so, the module
will be called matrox_w1.ko.
config W1_MASTER_DS9490
tristate "DS9490R transport layer driver"
depends on W1 && USB
help
Say Y here if you want to have a driver for DS9490R UWB <-> W1 bridge.
This support is also available as a module. If so, the module
will be called ds9490r.ko.
config W1_MASTER_DS9490_BRIDGE
tristate "DS9490R USB <-> W1 transport layer for 1-wire"
depends on W1_MASTER_DS9490
help
Say Y here if you want to communicate with your 1-wire devices
using DS9490R USB bridge.
This support is also available as a module. If so, the module
will be called ds_w1_bridge.ko.
config W1_MASTER_DS2490
tristate "DS2490 USB <-> W1 transport layer for 1-wire"
depends on W1 && USB
help
Say Y here if you want to have a driver for DS2490 based USB <-> W1 bridges,
for example DS9490*.
This support is also available as a module. If so, the module
will be called ds2490.ko.
config W1_MASTER_DS2482
tristate "Maxim DS2482 I2C to 1-Wire bridge"
......
drivers/w1/masters/Makefile
View file @ 81f6075e
......@@ -3,11 +3,6 @@
#
obj-$(CONFIG_W1_MASTER_MATROX) += matrox_w1.o
obj-$(CONFIG_W1_MASTER_DS9490) += ds9490r.o
ds9490r-objs := dscore.o
obj-$(CONFIG_W1_MASTER_DS9490_BRIDGE) += ds_w1_bridge.o
obj-$(CONFIG_W1_MASTER_DS2490) += ds2490.o
obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o
drivers/w1/masters/dscore.c → drivers/w1/masters/ds2490.c
View file @ 81f6075e
......@@ -24,7 +24,136 @@
#include <linux/mod_devicetable.h>
#include <linux/usb.h>
#include "dscore.h"
#include "../w1_int.h"
#include "../w1.h"
/* COMMAND TYPE CODES */
#define CONTROL_CMD 0x00
#define COMM_CMD 0x01
#define MODE_CMD 0x02
/* CONTROL COMMAND CODES */
#define CTL_RESET_DEVICE 0x0000
#define CTL_START_EXE 0x0001
#define CTL_RESUME_EXE 0x0002
#define CTL_HALT_EXE_IDLE 0x0003
#define CTL_HALT_EXE_DONE 0x0004
#define CTL_FLUSH_COMM_CMDS 0x0007
#define CTL_FLUSH_RCV_BUFFER 0x0008
#define CTL_FLUSH_XMT_BUFFER 0x0009
#define CTL_GET_COMM_CMDS 0x000A
/* MODE COMMAND CODES */
#define MOD_PULSE_EN 0x0000
#define MOD_SPEED_CHANGE_EN 0x0001
#define MOD_1WIRE_SPEED 0x0002
#define MOD_STRONG_PU_DURATION 0x0003
#define MOD_PULLDOWN_SLEWRATE 0x0004
#define MOD_PROG_PULSE_DURATION 0x0005
#define MOD_WRITE1_LOWTIME 0x0006
#define MOD_DSOW0_TREC 0x0007
/* COMMUNICATION COMMAND CODES */
#define COMM_ERROR_ESCAPE 0x0601
#define COMM_SET_DURATION 0x0012
#define COMM_BIT_IO 0x0020
#define COMM_PULSE 0x0030
#define COMM_1_WIRE_RESET 0x0042
#define COMM_BYTE_IO 0x0052
#define COMM_MATCH_ACCESS 0x0064
#define COMM_BLOCK_IO 0x0074
#define COMM_READ_STRAIGHT 0x0080
#define COMM_DO_RELEASE 0x6092
#define COMM_SET_PATH 0x00A2
#define COMM_WRITE_SRAM_PAGE 0x00B2
#define COMM_WRITE_EPROM 0x00C4
#define COMM_READ_CRC_PROT_PAGE 0x00D4
#define COMM_READ_REDIRECT_PAGE_CRC 0x21E4
#define COMM_SEARCH_ACCESS 0x00F4
/* Communication command bits */
#define COMM_TYPE 0x0008
#define COMM_SE 0x0008
#define COMM_D 0x0008
#define COMM_Z 0x0008
#define COMM_CH 0x0008
#define COMM_SM 0x0008
#define COMM_R 0x0008
#define COMM_IM 0x0001
#define COMM_PS 0x4000
#define COMM_PST 0x4000
#define COMM_CIB 0x4000
#define COMM_RTS 0x4000
#define COMM_DT 0x2000
#define COMM_SPU 0x1000
#define COMM_F 0x0800
#define COMM_NTP 0x0400
#define COMM_ICP 0x0200
#define COMM_RST 0x0100
#define PULSE_PROG 0x01
#define PULSE_SPUE 0x02
#define BRANCH_MAIN 0xCC
#define BRANCH_AUX 0x33
/*
* Duration of the strong pull-up pulse in milliseconds.
*/
#define PULLUP_PULSE_DURATION 750
/* Status flags */
#define ST_SPUA 0x01 /* Strong Pull-up is active */
#define ST_PRGA 0x02 /* 12V programming pulse is being generated */
#define ST_12VP 0x04 /* external 12V programming voltage is present */
#define ST_PMOD 0x08 /* DS2490 powered from USB and external sources */
#define ST_HALT 0x10 /* DS2490 is currently halted */
#define ST_IDLE 0x20 /* DS2490 is currently idle */
#define ST_EPOF 0x80
#define SPEED_NORMAL 0x00
#define SPEED_FLEXIBLE 0x01
#define SPEED_OVERDRIVE 0x02
#define NUM_EP 4
#define EP_CONTROL 0
#define EP_STATUS 1
#define EP_DATA_OUT 2
#define EP_DATA_IN 3
struct ds_device
{
struct list_head ds_entry;
struct usb_device *udev;
struct usb_interface *intf;
int ep[NUM_EP];
struct w1_bus_master master;
};
struct ds_status
{
u8 enable;
u8 speed;
u8 pullup_dur;
u8 ppuls_dur;
u8 pulldown_slew;
u8 write1_time;
u8 write0_time;
u8 reserved0;
u8 status;
u8 command0;
u8 command1;
u8 command_buffer_status;
u8 data_out_buffer_status;
u8 data_in_buffer_status;
u8 reserved1;
u8 reserved2;
};
static struct usb_device_id ds_id_table [] = {
{ USB_DEVICE(0x04fa, 0x2490) },
......@@ -35,21 +164,12 @@ MODULE_DEVICE_TABLE(usb, ds_id_table);
static int ds_probe(struct usb_interface *, const struct usb_device_id *);
static void ds_disconnect(struct usb_interface *);
int ds_touch_bit(struct ds_device *, u8, u8 *);
int ds_read_byte(struct ds_device *, u8 *);
int ds_read_bit(struct ds_device *, u8 *);
int ds_write_byte(struct ds_device *, u8);
int ds_write_bit(struct ds_device *, u8);
static int ds_start_pulse(struct ds_device *, int);
int ds_reset(struct ds_device *, struct ds_status *);
struct ds_device * ds_get_device(void);
void ds_put_device(struct ds_device *);
static inline void ds_dump_status(unsigned char *, unsigned char *, int);
static int ds_send_control(struct ds_device *, u16, u16);
static int ds_send_control_mode(struct ds_device *, u16, u16);
static int ds_send_control_cmd(struct ds_device *, u16, u16);
static LIST_HEAD(ds_devices);
static DECLARE_MUTEX(ds_mutex);
static struct usb_driver ds_driver = {
.name = "DS9490R",
......@@ -58,20 +178,6 @@ static struct usb_driver ds_driver = {
.id_table = ds_id_table,
};
static struct ds_device *ds_dev;
struct ds_device * ds_get_device(void)
{
if (ds_dev)
atomic_inc(&ds_dev->refcnt);
return ds_dev;
}
void ds_put_device(struct ds_device *dev)
{
atomic_dec(&dev->refcnt);
}
static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index)
{
int err;
......@@ -86,7 +192,7 @@ static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index)
return err;
}
#if 0
static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index)
{
int err;
......@@ -101,7 +207,7 @@ static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index)
return err;
}
#endif
static int ds_send_control(struct ds_device *dev, u16 value, u16 index)
{
int err;
......@@ -324,7 +430,7 @@ static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
return 0;
}
int ds_reset(struct ds_device *dev, struct ds_status *st)
static int ds_reset(struct ds_device *dev, struct ds_status *st)
{
int err;
......@@ -345,7 +451,7 @@ int ds_reset(struct ds_device *dev, struct ds_status *st)
}
#if 0
int ds_set_speed(struct ds_device *dev, int speed)
static int ds_set_speed(struct ds_device *dev, int speed)
{
int err;
......@@ -395,7 +501,7 @@ static int ds_start_pulse(struct ds_device *dev, int delay)
return err;
}
int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit)
static int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit)
{
int err, count;
struct ds_status st;
......@@ -427,7 +533,7 @@ int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit)
return 0;
}
int ds_write_bit(struct ds_device *dev, u8 bit)
static int ds_write_bit(struct ds_device *dev, u8 bit)
{
int err;
struct ds_status st;
......@@ -441,7 +547,7 @@ int ds_write_bit(struct ds_device *dev, u8 bit)
return 0;
}
int ds_write_byte(struct ds_device *dev, u8 byte)
static int ds_write_byte(struct ds_device *dev, u8 byte)
{
int err;
struct ds_status st;
......@@ -464,26 +570,7 @@ int ds_write_byte(struct ds_device *dev, u8 byte)
return !(byte == rbyte);
}
int ds_read_bit(struct ds_device *dev, u8 *bit)
{
int err;
err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE);
if (err)
return err;
err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_SPU | COMM_D, 0);
if (err)
return err;
err = ds_recv_data(dev, bit, sizeof(*bit));
if (err < 0)
return err;
return 0;
}
int ds_read_byte(struct ds_device *dev, u8 *byte)
static int ds_read_byte(struct ds_device *dev, u8 *byte)
{
int err;
struct ds_status st;
......@@ -501,7 +588,7 @@ int ds_read_byte(struct ds_device *dev, u8 *byte)
return 0;
}
int ds_read_block(struct ds_device *dev, u8 *buf, int len)
static int ds_read_block(struct ds_device *dev, u8 *buf, int len)
{
struct ds_status st;
int err;
......@@ -527,7 +614,7 @@ int ds_read_block(struct ds_device *dev, u8 *buf, int len)
return err;
}
int ds_write_block(struct ds_device *dev, u8 *buf, int len)
static int ds_write_block(struct ds_device *dev, u8 *buf, int len)
{
int err;
struct ds_status st;
......@@ -555,7 +642,7 @@ int ds_write_block(struct ds_device *dev, u8 *buf, int len)
#if 0
int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search)
static int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search)
{
int err;
u16 value, index;
......@@ -584,7 +671,7 @@ int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int condi
return err/8;
}
int ds_match_access(struct ds_device *dev, u64 init)
static int ds_match_access(struct ds_device *dev, u64 init)
{
int err;
struct ds_status st;
......@@ -604,7 +691,7 @@ int ds_match_access(struct ds_device *dev, u64 init)
return 0;
}
int ds_set_path(struct ds_device *dev, u64 init)
static int ds_set_path(struct ds_device *dev, u64 init)
{
int err;
struct ds_status st;
......@@ -630,45 +717,156 @@ int ds_set_path(struct ds_device *dev, u64 init)
#endif /* 0 */
static u8 ds9490r_touch_bit(void *data, u8 bit)
{
u8 ret;
struct ds_device *dev = data;
if (ds_touch_bit(dev, bit, &ret))
return 0;
return ret;
}
static void ds9490r_write_bit(void *data, u8 bit)
{
struct ds_device *dev = data;
ds_write_bit(dev, bit);
}
static void ds9490r_write_byte(void *data, u8 byte)
{
struct ds_device *dev = data;
ds_write_byte(dev, byte);
}
static u8 ds9490r_read_bit(void *data)
{
struct ds_device *dev = data;
int err;
u8 bit = 0;
err = ds_touch_bit(dev, 1, &bit);
if (err)
return 0;
return bit & 1;
}
static u8 ds9490r_read_byte(void *data)
{
struct ds_device *dev = data;
int err;
u8 byte = 0;
err = ds_read_byte(dev, &byte);
if (err)
return 0;
return byte;
}
static void ds9490r_write_block(void *data, const u8 *buf, int len)
{
struct ds_device *dev = data;
ds_write_block(dev, (u8 *)buf, len);
}
static u8 ds9490r_read_block(void *data, u8 *buf, int len)
{
struct ds_device *dev = data;
int err;
err = ds_read_block(dev, buf, len);
if (err < 0)
return 0;
return len;
}
static u8 ds9490r_reset(void *data)
{
struct ds_device *dev = data;
struct ds_status st;
int err;
memset(&st, 0, sizeof(st));
err = ds_reset(dev, &st);
if (err)
return 1;
return 0;
}
static int ds_w1_init(struct ds_device *dev)
{
memset(&dev->master, 0, sizeof(struct w1_bus_master));
dev->master.data = dev;
dev->master.touch_bit = &ds9490r_touch_bit;
dev->master.read_bit = &ds9490r_read_bit;
dev->master.write_bit = &ds9490r_write_bit;
dev->master.read_byte = &ds9490r_read_byte;
dev->master.write_byte = &ds9490r_write_byte;
dev->master.read_block = &ds9490r_read_block;
dev->master.write_block = &ds9490r_write_block;
dev->master.reset_bus = &ds9490r_reset;
return w1_add_master_device(&dev->master);
}
static void ds_w1_fini(struct ds_device *dev)
{
w1_remove_master_device(&dev->master);
}
static int ds_probe(struct usb_interface *intf,
const struct usb_device_id *udev_id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_endpoint_descriptor *endpoint;
struct usb_host_interface *iface_desc;
struct ds_device *dev;
int i, err;
ds_dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL);
if (!ds_dev) {
dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL);
if (!dev) {
printk(KERN_INFO "Failed to allocate new DS9490R structure.\n");
return -ENOMEM;
}
dev->udev = usb_get_dev(udev);
if (!dev->udev) {
err = -ENOMEM;
goto err_out_free;
}
memset(dev->ep, 0, sizeof(dev->ep));
ds_dev->udev = usb_get_dev(udev);
usb_set_intfdata(intf, ds_dev);
usb_set_intfdata(intf, dev);
err = usb_set_interface(ds_dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3);
err = usb_set_interface(dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3);
if (err) {
printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n",
intf->altsetting[0].desc.bInterfaceNumber, err);
return err;
goto err_out_clear;
}
err = usb_reset_configuration(ds_dev->udev);
err = usb_reset_configuration(dev->udev);
if (err) {
printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err);
return err;
goto err_out_clear;
}
iface_desc = &intf->altsetting[0];
if (iface_desc->desc.bNumEndpoints != NUM_EP-1) {
printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints);
return -ENODEV;
err = -EINVAL;
goto err_out_clear;
}
atomic_set(&ds_dev->refcnt, 0);
memset(ds_dev->ep, 0, sizeof(ds_dev->ep));
/*
* This loop doesn'd show control 0 endpoint,
* so we will fill only 1-3 endpoints entry.
......@@ -676,54 +874,31 @@ static int ds_probe(struct usb_interface *intf,
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
ds_dev->ep[i+1] = endpoint->bEndpointAddress;
dev->ep[i+1] = endpoint->bEndpointAddress;
#if 0
printk("%d: addr=%x, size=%d, dir=%s, type=%x\n",
i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize),
(endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT",
endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
#endif
}
#if 0
{
int err, i;
u64 buf[3];
u64 init=0xb30000002078ee81ull;
struct ds_status st;
ds_reset(ds_dev, &st);
err = ds_search(ds_dev, init, buf, 3, 0);
if (err < 0)
return err;
for (i=0; i<err; ++i)
printk("%d: %llx\n", i, buf[i]);
printk("Resetting...\n");
ds_reset(ds_dev, &st);
printk("Setting path for %llx.\n", init);
err = ds_set_path(ds_dev, init);
if (err)
return err;
printk("Calling MATCH_ACCESS.\n");
err = ds_match_access(ds_dev, init);
if (err)
return err;
printk("Searching the bus...\n");
err = ds_search(ds_dev, init, buf, 3, 0);
printk("ds_search() returned %d\n", err);
if (err < 0)
return err;
for (i=0; i<err; ++i)
printk("%d: %llx\n", i, buf[i]);
err = ds_w1_init(dev);
if (err)
goto err_out_clear;
return 0;
}
#endif
down(&ds_mutex);
list_add_tail(&dev->ds_entry, &ds_devices);
up(&ds_mutex);
return 0;
err_out_clear:
usb_set_intfdata(intf, NULL);
usb_put_dev(dev->udev);
err_out_free:
kfree(dev);
return err;
}
static void ds_disconnect(struct usb_interface *intf)
......@@ -731,19 +906,19 @@ static void ds_disconnect(struct usb_interface *intf)
struct ds_device *dev;
dev = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
if (!dev)
return;
while (atomic_read(&dev->refcnt)) {
printk(KERN_INFO "Waiting for DS to become free: refcnt=%d.\n",
atomic_read(&dev->refcnt));
down(&ds_mutex);
list_del(&dev->ds_entry);
up(&ds_mutex);
if (msleep_interruptible(1000))
flush_signals(current);
}
ds_w1_fini(dev);
usb_set_intfdata(intf, NULL);
usb_put_dev(dev->udev);
kfree(dev);
ds_dev = NULL;
}
static int ds_init(void)
......@@ -769,27 +944,4 @@ module_exit(ds_fini);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
EXPORT_SYMBOL(ds_touch_bit);
EXPORT_SYMBOL(ds_read_byte);
EXPORT_SYMBOL(ds_read_bit);
EXPORT_SYMBOL(ds_read_block);
EXPORT_SYMBOL(ds_write_byte);
EXPORT_SYMBOL(ds_write_bit);
EXPORT_SYMBOL(ds_write_block);
EXPORT_SYMBOL(ds_reset);
EXPORT_SYMBOL(ds_get_device);
EXPORT_SYMBOL(ds_put_device);
/*
* This functions can be used for EEPROM programming,
* when driver will be included into mainline this will
* require uncommenting.
*/
#if 0
EXPORT_SYMBOL(ds_start_pulse);
EXPORT_SYMBOL(ds_set_speed);
EXPORT_SYMBOL(ds_detect);
EXPORT_SYMBOL(ds_stop_pulse);
EXPORT_SYMBOL(ds_search);
#endif
MODULE_DESCRIPTION("DS2490 USB <-> W1 bus master driver (DS9490*)");
drivers/w1/masters/ds_w1_bridge.c deleted 100644 → 0
View file @ f522d239
/*
* ds_w1_bridge.c
*
* Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/types.h>
#include "../w1.h"
#include "../w1_int.h"
#include "dscore.h"
static struct ds_device *ds_dev;
static struct w1_bus_master *ds_bus_master;
static u8 ds9490r_touch_bit(void *data, u8 bit)
{
u8 ret;
struct ds_device *dev = data;
if (ds_touch_bit(dev, bit, &ret))
return 0;
return ret;
}
static void ds9490r_write_bit(void *data, u8 bit)
{
struct ds_device *dev = data;
ds_write_bit(dev, bit);
}
static void ds9490r_write_byte(void *data, u8 byte)
{
struct ds_device *dev = data;
ds_write_byte(dev, byte);
}
static u8 ds9490r_read_bit(void *data)
{
struct ds_device *dev = data;
int err;
u8 bit = 0;
err = ds_touch_bit(dev, 1, &bit);
if (err)
return 0;
//err = ds_read_bit(dev, &bit);
//if (err)
// return 0;
return bit & 1;
}
static u8 ds9490r_read_byte(void *data)
{
struct ds_device *dev = data;
int err;
u8 byte = 0;
err = ds_read_byte(dev, &byte);
if (err)
return 0;
return byte;
}
static void ds9490r_write_block(void *data, const u8 *buf, int len)
{
struct ds_device *dev = data;
ds_write_block(dev, (u8 *)buf, len);
}
static u8 ds9490r_read_block(void *data, u8 *buf, int len)
{
struct ds_device *dev = data;
int err;
err = ds_read_block(dev, buf, len);
if (err < 0)
return 0;
return len;
}
static u8 ds9490r_reset(void *data)
{
struct ds_device *dev = data;
struct ds_status st;
int err;
memset(&st, 0, sizeof(st));
err = ds_reset(dev, &st);
if (err)
return 1;
return 0;
}
static int __devinit ds_w1_init(void)
{
int err;
ds_bus_master = kmalloc(sizeof(*ds_bus_master), GFP_KERNEL);
if (!ds_bus_master) {
printk(KERN_ERR "Failed to allocate DS9490R USB<->W1 bus_master structure.\n");
return -ENOMEM;
}
ds_dev = ds_get_device();
if (!ds_dev) {
printk(KERN_ERR "DS9490R is not registered.\n");
err = -ENODEV;
goto err_out_free_bus_master;
}
memset(ds_bus_master, 0, sizeof(*ds_bus_master));
ds_bus_master->data = ds_dev;
ds_bus_master->touch_bit = &ds9490r_touch_bit;
ds_bus_master->read_bit = &ds9490r_read_bit;
ds_bus_master->write_bit = &ds9490r_write_bit;
ds_bus_master->read_byte = &ds9490r_read_byte;
ds_bus_master->write_byte = &ds9490r_write_byte;
ds_bus_master->read_block = &ds9490r_read_block;
ds_bus_master->write_block = &ds9490r_write_block;
ds_bus_master->reset_bus = &ds9490r_reset;
err = w1_add_master_device(ds_bus_master);
if (err)
goto err_out_put_device;
return 0;
err_out_put_device:
ds_put_device(ds_dev);
err_out_free_bus_master:
kfree(ds_bus_master);
return err;
}
static void __devexit ds_w1_fini(void)
{
w1_remove_master_device(ds_bus_master);
ds_put_device(ds_dev);
kfree(ds_bus_master);
}
module_init(ds_w1_init);
module_exit(ds_w1_fini);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
drivers/w1/masters/dscore.h deleted 100644 → 0
View file @ f522d239
/*
* dscore.h
*
* Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __DSCORE_H
#define __DSCORE_H
#include <linux/usb.h>
#include <asm/atomic.h>
/* COMMAND TYPE CODES */
#define CONTROL_CMD 0x00
#define COMM_CMD 0x01
#define MODE_CMD 0x02
/* CONTROL COMMAND CODES */
#define CTL_RESET_DEVICE 0x0000
#define CTL_START_EXE 0x0001
#define CTL_RESUME_EXE 0x0002
#define CTL_HALT_EXE_IDLE 0x0003
#define CTL_HALT_EXE_DONE 0x0004
#define CTL_FLUSH_COMM_CMDS 0x0007
#define CTL_FLUSH_RCV_BUFFER 0x0008
#define CTL_FLUSH_XMT_BUFFER 0x0009
#define CTL_GET_COMM_CMDS 0x000A
/* MODE COMMAND CODES */
#define MOD_PULSE_EN 0x0000
#define MOD_SPEED_CHANGE_EN 0x0001
#define MOD_1WIRE_SPEED 0x0002
#define MOD_STRONG_PU_DURATION 0x0003
#define MOD_PULLDOWN_SLEWRATE 0x0004
#define MOD_PROG_PULSE_DURATION 0x0005
#define MOD_WRITE1_LOWTIME 0x0006
#define MOD_DSOW0_TREC 0x0007
/* COMMUNICATION COMMAND CODES */
#define COMM_ERROR_ESCAPE 0x0601
#define COMM_SET_DURATION 0x0012
#define COMM_BIT_IO 0x0020
#define COMM_PULSE 0x0030
#define COMM_1_WIRE_RESET 0x0042
#define COMM_BYTE_IO 0x0052
#define COMM_MATCH_ACCESS 0x0064
#define COMM_BLOCK_IO 0x0074
#define COMM_READ_STRAIGHT 0x0080
#define COMM_DO_RELEASE 0x6092
#define COMM_SET_PATH 0x00A2
#define COMM_WRITE_SRAM_PAGE 0x00B2
#define COMM_WRITE_EPROM 0x00C4
#define COMM_READ_CRC_PROT_PAGE 0x00D4
#define COMM_READ_REDIRECT_PAGE_CRC 0x21E4
#define COMM_SEARCH_ACCESS 0x00F4
/* Communication command bits */
#define COMM_TYPE 0x0008
#define COMM_SE 0x0008
#define COMM_D 0x0008
#define COMM_Z 0x0008
#define COMM_CH 0x0008
#define COMM_SM 0x0008
#define COMM_R 0x0008
#define COMM_IM 0x0001
#define COMM_PS 0x4000
#define COMM_PST 0x4000
#define COMM_CIB 0x4000
#define COMM_RTS 0x4000
#define COMM_DT 0x2000
#define COMM_SPU 0x1000
#define COMM_F 0x0800
#define COMM_NTP 0x0400
#define COMM_ICP 0x0200
#define COMM_RST 0x0100
#define PULSE_PROG 0x01
#define PULSE_SPUE 0x02
#define BRANCH_MAIN 0xCC
#define BRANCH_AUX 0x33
/*
* Duration of the strong pull-up pulse in milliseconds.
*/
#define PULLUP_PULSE_DURATION 750
/* Status flags */
#define ST_SPUA 0x01 /* Strong Pull-up is active */
#define ST_PRGA 0x02 /* 12V programming pulse is being generated */
#define ST_12VP 0x04 /* external 12V programming voltage is present */
#define ST_PMOD 0x08 /* DS2490 powered from USB and external sources */
#define ST_HALT 0x10 /* DS2490 is currently halted */
#define ST_IDLE 0x20 /* DS2490 is currently idle */
#define ST_EPOF 0x80
#define SPEED_NORMAL 0x00
#define SPEED_FLEXIBLE 0x01
#define SPEED_OVERDRIVE 0x02
#define NUM_EP 4
#define EP_CONTROL 0
#define EP_STATUS 1
#define EP_DATA_OUT 2
#define EP_DATA_IN 3
struct ds_device
{
struct usb_device *udev;
struct usb_interface *intf;
int ep[NUM_EP];
atomic_t refcnt;
};
struct ds_status
{
u8 enable;
u8 speed;
u8 pullup_dur;
u8 ppuls_dur;
u8 pulldown_slew;
u8 write1_time;
u8 write0_time;
u8 reserved0;
u8 status;
u8 command0;
u8 command1;
u8 command_buffer_status;
u8 data_out_buffer_status;
u8 data_in_buffer_status;
u8 reserved1;
u8 reserved2;
};
int ds_touch_bit(struct ds_device *, u8, u8 *);
int ds_read_byte(struct ds_device *, u8 *);
int ds_read_bit(struct ds_device *, u8 *);
int ds_write_byte(struct ds_device *, u8);
int ds_write_bit(struct ds_device *, u8);
int ds_reset(struct ds_device *, struct ds_status *);
struct ds_device * ds_get_device(void);
void ds_put_device(struct ds_device *);
int ds_write_block(struct ds_device *, u8 *, int);
int ds_read_block(struct ds_device *, u8 *, int);
#endif /* __DSCORE_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7