usb: Store bus type in usb_hcd, not in driver flags.

The xHCI driver essentially has both a USB 2.0 and a USB 3.0 roothub.  So
setting the HCD_USB3 bits in the hcd->driver->flags is a bit misleading.
Add a new field to usb_hcd, bcdUSB.  Store the result of
hcd->driver->flags & HCD_MASK in it.  Later, when we have the xHCI driver
register the two roothubs, we'll set the usb_hcd->bcdUSB field to HCD_USB2
for the USB 2.0 roothub, and HCD_USB3 for the USB 3.0 roothub.
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>

drivers/usb/core/hcd.c

@@ -507,7 +507,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 		switch (wValue & 0xff00) {
 		case USB_DT_DEVICE << 8:
-			switch (hcd->driver->flags & HCD_MASK) {
+			switch (hcd->speed) {
 			case HCD_USB3:
 				bufp = usb3_rh_dev_descriptor;
 				break;
@@ -525,7 +525,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 				patch_protocol = 1;
 			break;
 		case USB_DT_CONFIG << 8:
-			switch (hcd->driver->flags & HCD_MASK) {
+			switch (hcd->speed) {
 			case HCD_USB3:
 				bufp = ss_rh_config_descriptor;
 				len = sizeof ss_rh_config_descriptor;
@@ -2216,6 +2216,7 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
 #endif
 
 	hcd->driver = driver;
+	hcd->speed = driver->flags & HCD_MASK;
 	hcd->product_desc = (driver->product_desc) ? driver->product_desc :
 			"USB Host Controller";
 	return hcd;
@@ -2325,7 +2326,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	}
 	hcd->self.root_hub = rhdev;
 
-	switch (hcd->driver->flags & HCD_MASK) {
+	switch (hcd->speed) {
 	case HCD_USB11:
 		rhdev->speed = USB_SPEED_FULL;
 		break;

include/linux/usb/hcd.h

@@ -76,6 +76,10 @@ struct usb_hcd {
 	struct kref		kref;		/* reference counter */
 
 	const char		*product_desc;	/* product/vendor string */
+	int			speed;		/* Speed for this roothub.
+						 * May be different from
+						 * hcd->driver->flags & HCD_MASK
+						 */
 	char			irq_descr[24];	/* driver + bus # */
 
 	struct timer_list	rh_timer;	/* drives root-hub polling */