Commit 841fb73a authored by Raphael Moreira Zinsly's avatar Raphael Moreira Zinsly Committed by Michael Ellerman

selftests/powerpc: Add NX-GZIP engine decompress testcase

Include a decompression testcase for the powerpc NX-GZIP
engine.
Signed-off-by: default avatarBulent Abali <abali@us.ibm.com>
Signed-off-by: default avatarRaphael Moreira Zinsly <rzinsly@linux.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200420205538.25181-5-rzinsly@linux.ibm.com
parent 647c734f
CFLAGS = -O3 -m64 -I./include
TEST_GEN_FILES := gzfht_test
TEST_GEN_FILES := gzfht_test gunz_test
TEST_PROGS := nx-gzip-test.sh
include ../../lib.mk
......
// SPDX-License-Identifier: GPL-2.0-or-later
/* P9 gunzip sample code for demonstrating the P9 NX hardware
* interface. Not intended for productive uses or for performance or
* compression ratio measurements. Note also that /dev/crypto/gzip,
* VAS and skiboot support are required
*
* Copyright 2020 IBM Corp.
*
* Author: Bulent Abali <abali@us.ibm.com>
*
* https://github.com/libnxz/power-gzip for zlib api and other utils
* Definitions of acronyms used here. See
* P9 NX Gzip Accelerator User's Manual for details:
* https://github.com/libnxz/power-gzip/blob/develop/doc/power_nx_gzip_um.pdf
*
* adler/crc: 32 bit checksums appended to stream tail
* ce: completion extension
* cpb: coprocessor parameter block (metadata)
* crb: coprocessor request block (command)
* csb: coprocessor status block (status)
* dht: dynamic huffman table
* dde: data descriptor element (address, length)
* ddl: list of ddes
* dh/fh: dynamic and fixed huffman types
* fc: coprocessor function code
* histlen: history/dictionary length
* history: sliding window of up to 32KB of data
* lzcount: Deflate LZ symbol counts
* rembytecnt: remaining byte count
* sfbt: source final block type; last block's type during decomp
* spbc: source processed byte count
* subc: source unprocessed bit count
* tebc: target ending bit count; valid bits in the last byte
* tpbc: target processed byte count
* vas: virtual accelerator switch; the user mode interface
*/
#define _ISOC11_SOURCE // For aligned_alloc()
#define _DEFAULT_SOURCE // For endian.h
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <stdint.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/fcntl.h>
#include <sys/mman.h>
#include <endian.h>
#include <bits/endian.h>
#include <sys/ioctl.h>
#include <assert.h>
#include <errno.h>
#include <signal.h>
#include "nxu.h"
#include "nx.h"
#include "crb.h"
int nx_dbg;
FILE *nx_gzip_log;
#define NX_MIN(X, Y) (((X) < (Y))?(X):(Y))
#define NX_MAX(X, Y) (((X) > (Y))?(X):(Y))
#define GETINPC(X) fgetc(X)
#define FNAME_MAX 1024
/* fifo queue management */
#define fifo_used_bytes(used) (used)
#define fifo_free_bytes(used, len) ((len)-(used))
/* amount of free bytes in the first and last parts */
#define fifo_free_first_bytes(cur, used, len) ((((cur)+(used)) <= (len)) \
? (len)-((cur)+(used)) : 0)
#define fifo_free_last_bytes(cur, used, len) ((((cur)+(used)) <= (len)) \
? (cur) : (len)-(used))
/* amount of used bytes in the first and last parts */
#define fifo_used_first_bytes(cur, used, len) ((((cur)+(used)) <= (len)) \
? (used) : (len)-(cur))
#define fifo_used_last_bytes(cur, used, len) ((((cur)+(used)) <= (len)) \
? 0 : ((used)+(cur))-(len))
/* first and last free parts start here */
#define fifo_free_first_offset(cur, used) ((cur)+(used))
#define fifo_free_last_offset(cur, used, len) \
fifo_used_last_bytes(cur, used, len)
/* first and last used parts start here */
#define fifo_used_first_offset(cur) (cur)
#define fifo_used_last_offset(cur) (0)
const int fifo_in_len = 1<<24;
const int fifo_out_len = 1<<24;
const int page_sz = 1<<16;
const int line_sz = 1<<7;
const int window_max = 1<<15;
/*
* Adds an (address, len) pair to the list of ddes (ddl) and updates
* the base dde. ddl[0] is the only dde in a direct dde which
* contains a single (addr,len) pair. For more pairs, ddl[0] becomes
* the indirect (base) dde that points to a list of direct ddes.
* See Section 6.4 of the NX-gzip user manual for DDE description.
* Addr=NULL, len=0 clears the ddl[0]. Returns the total number of
* bytes in ddl. Caller is responsible for allocting the array of
* nx_dde_t *ddl. If N addresses are required in the scatter-gather
* list, the ddl array must have N+1 entries minimum.
*/
static inline uint32_t nx_append_dde(struct nx_dde_t *ddl, void *addr,
uint32_t len)
{
uint32_t ddecnt;
uint32_t bytes;
if (addr == NULL && len == 0) {
clearp_dde(ddl);
return 0;
}
NXPRT(fprintf(stderr, "%d: %s addr %p len %x\n", __LINE__, addr,
__func__, len));
/* Number of ddes in the dde list ; == 0 when it is a direct dde */
ddecnt = getpnn(ddl, dde_count);
bytes = getp32(ddl, ddebc);
if (ddecnt == 0 && bytes == 0) {
/* First dde is unused; make it a direct dde */
bytes = len;
putp32(ddl, ddebc, bytes);
putp64(ddl, ddead, (uint64_t) addr);
} else if (ddecnt == 0) {
/* Converting direct to indirect dde
* ddl[0] becomes head dde of ddl
* copy direct to indirect first.
*/
ddl[1] = ddl[0];
/* Add the new dde next */
clear_dde(ddl[2]);
put32(ddl[2], ddebc, len);
put64(ddl[2], ddead, (uint64_t) addr);
/* Ddl head points to 2 direct ddes */
ddecnt = 2;
putpnn(ddl, dde_count, ddecnt);
bytes = bytes + len;
putp32(ddl, ddebc, bytes);
/* Pointer to the first direct dde */
putp64(ddl, ddead, (uint64_t) &ddl[1]);
} else {
/* Append a dde to an existing indirect ddl */
++ddecnt;
clear_dde(ddl[ddecnt]);
put64(ddl[ddecnt], ddead, (uint64_t) addr);
put32(ddl[ddecnt], ddebc, len);
putpnn(ddl, dde_count, ddecnt);
bytes = bytes + len;
putp32(ddl, ddebc, bytes); /* byte sum of all dde */
}
return bytes;
}
/*
* Touch specified number of pages represented in number bytes
* beginning from the first buffer in a dde list.
* Do not touch the pages past buf_sz-th byte's page.
*
* Set buf_sz = 0 to touch all pages described by the ddep.
*/
static int nx_touch_pages_dde(struct nx_dde_t *ddep, long buf_sz, long page_sz,
int wr)
{
uint32_t indirect_count;
uint32_t buf_len;
long total;
uint64_t buf_addr;
struct nx_dde_t *dde_list;
int i;
assert(!!ddep);
indirect_count = getpnn(ddep, dde_count);
NXPRT(fprintf(stderr, "%s dde_count %d request len ", __func__,
indirect_count));
NXPRT(fprintf(stderr, "0x%lx\n", buf_sz));
if (indirect_count == 0) {
/* Direct dde */
buf_len = getp32(ddep, ddebc);
buf_addr = getp64(ddep, ddead);
NXPRT(fprintf(stderr, "touch direct ddebc 0x%x ddead %p\n",
buf_len, (void *)buf_addr));
if (buf_sz == 0)
nxu_touch_pages((void *)buf_addr, buf_len, page_sz, wr);
else
nxu_touch_pages((void *)buf_addr, NX_MIN(buf_len,
buf_sz), page_sz, wr);
return ERR_NX_OK;
}
/* Indirect dde */
if (indirect_count > MAX_DDE_COUNT)
return ERR_NX_EXCESSIVE_DDE;
/* First address of the list */
dde_list = (struct nx_dde_t *) getp64(ddep, ddead);
if (buf_sz == 0)
buf_sz = getp32(ddep, ddebc);
total = 0;
for (i = 0; i < indirect_count; i++) {
buf_len = get32(dde_list[i], ddebc);
buf_addr = get64(dde_list[i], ddead);
total += buf_len;
NXPRT(fprintf(stderr, "touch loop len 0x%x ddead %p total ",
buf_len, (void *)buf_addr));
NXPRT(fprintf(stderr, "0x%lx\n", total));
/* Touching fewer pages than encoded in the ddebc */
if (total > buf_sz) {
buf_len = NX_MIN(buf_len, total - buf_sz);
nxu_touch_pages((void *)buf_addr, buf_len, page_sz, wr);
NXPRT(fprintf(stderr, "touch loop break len 0x%x ",
buf_len));
NXPRT(fprintf(stderr, "ddead %p\n", (void *)buf_addr));
break;
}
nxu_touch_pages((void *)buf_addr, buf_len, page_sz, wr);
}
return ERR_NX_OK;
}
/*
* Src and dst buffers are supplied in scatter gather lists.
* NX function code and other parameters supplied in cmdp.
*/
static int nx_submit_job(struct nx_dde_t *src, struct nx_dde_t *dst,
struct nx_gzip_crb_cpb_t *cmdp, void *handle)
{
uint64_t csbaddr;
memset((void *)&cmdp->crb.csb, 0, sizeof(cmdp->crb.csb));
cmdp->crb.source_dde = *src;
cmdp->crb.target_dde = *dst;
/* Status, output byte count in tpbc */
csbaddr = ((uint64_t) &cmdp->crb.csb) & csb_address_mask;
put64(cmdp->crb, csb_address, csbaddr);
/* NX reports input bytes in spbc; cleared */
cmdp->cpb.out_spbc_comp_wrap = 0;
cmdp->cpb.out_spbc_comp_with_count = 0;
cmdp->cpb.out_spbc_decomp = 0;
/* Clear output */
put32(cmdp->cpb, out_crc, INIT_CRC);
put32(cmdp->cpb, out_adler, INIT_ADLER);
/* Submit the crb, the job descriptor, to the accelerator. */
return nxu_submit_job(cmdp, handle);
}
int decompress_file(int argc, char **argv, void *devhandle)
{
FILE *inpf = NULL;
FILE *outf = NULL;
int c, expect, i, cc, rc = 0;
char gzfname[FNAME_MAX];
/* Queuing, file ops, byte counting */
char *fifo_in, *fifo_out;
int used_in, cur_in, used_out, cur_out, read_sz, n;
int first_free, last_free, first_used, last_used;
int first_offset, last_offset;
int write_sz, free_space, source_sz;
int source_sz_estimate, target_sz_estimate;
uint64_t last_comp_ratio = 0; /* 1000 max */
uint64_t total_out = 0;
int is_final, is_eof;
/* nx hardware */
int sfbt, subc, spbc, tpbc, nx_ce, fc, resuming = 0;
int history_len = 0;
struct nx_gzip_crb_cpb_t cmd, *cmdp;
struct nx_dde_t *ddl_in;
struct nx_dde_t dde_in[6] __aligned(128);
struct nx_dde_t *ddl_out;
struct nx_dde_t dde_out[6] __aligned(128);
int pgfault_retries;
/* when using mmap'ed files */
off_t input_file_offset;
if (argc > 2) {
fprintf(stderr, "usage: %s <fname> or stdin\n", argv[0]);
fprintf(stderr, " writes to stdout or <fname>.nx.gunzip\n");
return -1;
}
if (argc == 1) {
inpf = stdin;
outf = stdout;
} else if (argc == 2) {
char w[1024];
char *wp;
inpf = fopen(argv[1], "r");
if (inpf == NULL) {
perror(argv[1]);
return -1;
}
/* Make a new file name to write to. Ignoring '.gz' */
wp = (NULL != (wp = strrchr(argv[1], '/'))) ? (wp+1) : argv[1];
strcpy(w, wp);
strcat(w, ".nx.gunzip");
outf = fopen(w, "w");
if (outf == NULL) {
perror(w);
return -1;
}
}
/* Decode the gzip header */
c = GETINPC(inpf); expect = 0x1f; /* ID1 */
if (c != expect)
goto err1;
c = GETINPC(inpf); expect = 0x8b; /* ID2 */
if (c != expect)
goto err1;
c = GETINPC(inpf); expect = 0x08; /* CM */
if (c != expect)
goto err1;
int flg = GETINPC(inpf); /* FLG */
if (flg & 0xE0 || flg & 0x4 || flg == EOF)
goto err2;
fprintf(stderr, "gzHeader FLG %x\n", flg);
/* Read 6 bytes; ignoring the MTIME, XFL, OS fields in this
* sample code.
*/
for (i = 0; i < 6; i++) {
char tmp[10];
tmp[i] = GETINPC(inpf);
if (tmp[i] == EOF)
goto err3;
fprintf(stderr, "%02x ", tmp[i]);
if (i == 5)
fprintf(stderr, "\n");
}
fprintf(stderr, "gzHeader MTIME, XFL, OS ignored\n");
/* FNAME */
if (flg & 0x8) {
int k = 0;
do {
c = GETINPC(inpf);
if (c == EOF || k >= FNAME_MAX)
goto err3;
gzfname[k++] = c;
} while (c);
fprintf(stderr, "gzHeader FNAME: %s\n", gzfname);
}
/* FHCRC */
if (flg & 0x2) {
c = GETINPC(inpf);
if (c == EOF)
goto err3;
c = GETINPC(inpf);
if (c == EOF)
goto err3;
fprintf(stderr, "gzHeader FHCRC: ignored\n");
}
used_in = cur_in = used_out = cur_out = 0;
is_final = is_eof = 0;
/* Allocate one page larger to prevent page faults due to NX
* overfetching.
* Either do this (char*)(uintptr_t)aligned_alloc or use
* -std=c11 flag to make the int-to-pointer warning go away.
*/
assert((fifo_in = (char *)(uintptr_t)aligned_alloc(line_sz,
fifo_in_len + page_sz)) != NULL);
assert((fifo_out = (char *)(uintptr_t)aligned_alloc(line_sz,
fifo_out_len + page_sz + line_sz)) != NULL);
/* Leave unused space due to history rounding rules */
fifo_out = fifo_out + line_sz;
nxu_touch_pages(fifo_out, fifo_out_len, page_sz, 1);
ddl_in = &dde_in[0];
ddl_out = &dde_out[0];
cmdp = &cmd;
memset(&cmdp->crb, 0, sizeof(cmdp->crb));
read_state:
/* Read from .gz file */
NXPRT(fprintf(stderr, "read_state:\n"));
if (is_eof != 0)
goto write_state;
/* We read in to fifo_in in two steps: first: read in to from
* cur_in to the end of the buffer. last: if free space wrapped
* around, read from fifo_in offset 0 to offset cur_in.
*/
/* Reset fifo head to reduce unnecessary wrap arounds */
cur_in = (used_in == 0) ? 0 : cur_in;
/* Free space total is reduced by a gap */
free_space = NX_MAX(0, fifo_free_bytes(used_in, fifo_in_len)
- line_sz);
/* Free space may wrap around as first and last */
first_free = fifo_free_first_bytes(cur_in, used_in, fifo_in_len);
last_free = fifo_free_last_bytes(cur_in, used_in, fifo_in_len);
/* Start offsets of the free memory */
first_offset = fifo_free_first_offset(cur_in, used_in);
last_offset = fifo_free_last_offset(cur_in, used_in, fifo_in_len);
/* Reduce read_sz because of the line_sz gap */
read_sz = NX_MIN(free_space, first_free);
n = 0;
if (read_sz > 0) {
/* Read in to offset cur_in + used_in */
n = fread(fifo_in + first_offset, 1, read_sz, inpf);
used_in = used_in + n;
free_space = free_space - n;
assert(n <= read_sz);
if (n != read_sz) {
/* Either EOF or error; exit the read loop */
is_eof = 1;
goto write_state;
}
}
/* If free space wrapped around */
if (last_free > 0) {
/* Reduce read_sz because of the line_sz gap */
read_sz = NX_MIN(free_space, last_free);
n = 0;
if (read_sz > 0) {
n = fread(fifo_in + last_offset, 1, read_sz, inpf);
used_in = used_in + n; /* Increase used space */
free_space = free_space - n; /* Decrease free space */
assert(n <= read_sz);
if (n != read_sz) {
/* Either EOF or error; exit the read loop */
is_eof = 1;
goto write_state;
}
}
}
/* At this point we have used_in bytes in fifo_in with the
* data head starting at cur_in and possibly wrapping around.
*/
write_state:
/* Write decompressed data to output file */
NXPRT(fprintf(stderr, "write_state:\n"));
if (used_out == 0)
goto decomp_state;
/* If fifo_out has data waiting, write it out to the file to
* make free target space for the accelerator used bytes in
* the first and last parts of fifo_out.
*/
first_used = fifo_used_first_bytes(cur_out, used_out, fifo_out_len);
last_used = fifo_used_last_bytes(cur_out, used_out, fifo_out_len);
write_sz = first_used;
n = 0;
if (write_sz > 0) {
n = fwrite(fifo_out + cur_out, 1, write_sz, outf);
used_out = used_out - n;
/* Move head of the fifo */
cur_out = (cur_out + n) % fifo_out_len;
assert(n <= write_sz);
if (n != write_sz) {
fprintf(stderr, "error: write\n");
rc = -1;
goto err5;
}
}
if (last_used > 0) { /* If more data available in the last part */
write_sz = last_used; /* Keep it here for later */
n = 0;
if (write_sz > 0) {
n = fwrite(fifo_out, 1, write_sz, outf);
used_out = used_out - n;
cur_out = (cur_out + n) % fifo_out_len;
assert(n <= write_sz);
if (n != write_sz) {
fprintf(stderr, "error: write\n");
rc = -1;
goto err5;
}
}
}
decomp_state:
/* NX decompresses input data */
NXPRT(fprintf(stderr, "decomp_state:\n"));
if (is_final)
goto finish_state;
/* Address/len lists */
clearp_dde(ddl_in);
clearp_dde(ddl_out);
/* FC, CRC, HistLen, Table 6-6 */
if (resuming) {
/* Resuming a partially decompressed input.
* The key to resume is supplying the 32KB
* dictionary (history) to NX, which is basically
* the last 32KB of output produced.
*/
fc = GZIP_FC_DECOMPRESS_RESUME;
cmdp->cpb.in_crc = cmdp->cpb.out_crc;
cmdp->cpb.in_adler = cmdp->cpb.out_adler;
/* Round up the history size to quadword. Section 2.10 */
history_len = (history_len + 15) / 16;
putnn(cmdp->cpb, in_histlen, history_len);
history_len = history_len * 16; /* bytes */
if (history_len > 0) {
/* Chain in the history buffer to the DDE list */
if (cur_out >= history_len) {
nx_append_dde(ddl_in, fifo_out
+ (cur_out - history_len),
history_len);
} else {
nx_append_dde(ddl_in, fifo_out
+ ((fifo_out_len + cur_out)
- history_len),
history_len - cur_out);
/* Up to 32KB history wraps around fifo_out */
nx_append_dde(ddl_in, fifo_out, cur_out);
}
}
} else {
/* First decompress job */
fc = GZIP_FC_DECOMPRESS;
history_len = 0;
/* Writing 0 clears out subc as well */
cmdp->cpb.in_histlen = 0;
total_out = 0;
put32(cmdp->cpb, in_crc, INIT_CRC);
put32(cmdp->cpb, in_adler, INIT_ADLER);
put32(cmdp->cpb, out_crc, INIT_CRC);
put32(cmdp->cpb, out_adler, INIT_ADLER);
/* Assuming 10% compression ratio initially; use the
* most recently measured compression ratio as a
* heuristic to estimate the input and output
* sizes. If we give too much input, the target buffer
* overflows and NX cycles are wasted, and then we
* must retry with smaller input size. 1000 is 100%.
*/
last_comp_ratio = 100UL;
}
cmdp->crb.gzip_fc = 0;
putnn(cmdp->crb, gzip_fc, fc);
/*
* NX source buffers
*/
first_used = fifo_used_first_bytes(cur_in, used_in, fifo_in_len);
last_used = fifo_used_last_bytes(cur_in, used_in, fifo_in_len);
if (first_used > 0)
nx_append_dde(ddl_in, fifo_in + cur_in, first_used);
if (last_used > 0)
nx_append_dde(ddl_in, fifo_in, last_used);
/*
* NX target buffers
*/
first_free = fifo_free_first_bytes(cur_out, used_out, fifo_out_len);
last_free = fifo_free_last_bytes(cur_out, used_out, fifo_out_len);
/* Reduce output free space amount not to overwrite the history */
int target_max = NX_MAX(0, fifo_free_bytes(used_out, fifo_out_len)
- (1<<16));
NXPRT(fprintf(stderr, "target_max %d (0x%x)\n", target_max,
target_max));
first_free = NX_MIN(target_max, first_free);
if (first_free > 0) {
first_offset = fifo_free_first_offset(cur_out, used_out);
nx_append_dde(ddl_out, fifo_out + first_offset, first_free);
}
if (last_free > 0) {
last_free = NX_MIN(target_max - first_free, last_free);
if (last_free > 0) {
last_offset = fifo_free_last_offset(cur_out, used_out,
fifo_out_len);
nx_append_dde(ddl_out, fifo_out + last_offset,
last_free);
}
}
/* Target buffer size is used to limit the source data size
* based on previous measurements of compression ratio.
*/
/* source_sz includes history */
source_sz = getp32(ddl_in, ddebc);
assert(source_sz > history_len);
source_sz = source_sz - history_len;
/* Estimating how much source is needed to 3/4 fill a
* target_max size target buffer. If we overshoot, then NX
* must repeat the job with smaller input and we waste
* bandwidth. If we undershoot then we use more NX calls than
* necessary.
*/
source_sz_estimate = ((uint64_t)target_max * last_comp_ratio * 3UL)
/ 4000;
if (source_sz_estimate < source_sz) {
/* Target might be small, therefore limiting the
* source data.
*/
source_sz = source_sz_estimate;
target_sz_estimate = target_max;
} else {
/* Source file might be small, therefore limiting target
* touch pages to a smaller value to save processor cycles.
*/
target_sz_estimate = ((uint64_t)source_sz * 1000UL)
/ (last_comp_ratio + 1);
target_sz_estimate = NX_MIN(2 * target_sz_estimate,
target_max);
}
source_sz = source_sz + history_len;
/* Some NX condition codes require submitting the NX job again.
* Kernel doesn't handle NX page faults. Expects user code to
* touch pages.
*/
pgfault_retries = NX_MAX_FAULTS;
restart_nx:
putp32(ddl_in, ddebc, source_sz);
/* Fault in pages */
nxu_touch_pages(cmdp, sizeof(struct nx_gzip_crb_cpb_t), page_sz, 1);
nx_touch_pages_dde(ddl_in, 0, page_sz, 0);
nx_touch_pages_dde(ddl_out, target_sz_estimate, page_sz, 1);
/* Send job to NX */
cc = nx_submit_job(ddl_in, ddl_out, cmdp, devhandle);
switch (cc) {
case ERR_NX_TRANSLATION:
/* We touched the pages ahead of time. In the most common case
* we shouldn't be here. But may be some pages were paged out.
* Kernel should have placed the faulting address to fsaddr.
*/
NXPRT(fprintf(stderr, "ERR_NX_TRANSLATION %p\n",
(void *)cmdp->crb.csb.fsaddr));
if (pgfault_retries == NX_MAX_FAULTS) {
/* Try once with exact number of pages */
--pgfault_retries;
goto restart_nx;
} else if (pgfault_retries > 0) {
/* If still faulting try fewer input pages
* assuming memory outage
*/
if (source_sz > page_sz)
source_sz = NX_MAX(source_sz / 2, page_sz);
--pgfault_retries;
goto restart_nx;
} else {
fprintf(stderr, "cannot make progress; too many ");
fprintf(stderr, "page fault retries cc= %d\n", cc);
rc = -1;
goto err5;
}
case ERR_NX_DATA_LENGTH:
NXPRT(fprintf(stderr, "ERR_NX_DATA_LENGTH; "));
NXPRT(fprintf(stderr, "stream may have trailing data\n"));
/* Not an error in the most common case; it just says
* there is trailing data that we must examine.
*
* CC=3 CE(1)=0 CE(0)=1 indicates partial completion
* Fig.6-7 and Table 6-8.
*/
nx_ce = get_csb_ce_ms3b(cmdp->crb.csb);
if (!csb_ce_termination(nx_ce) &&
csb_ce_partial_completion(nx_ce)) {
/* Check CPB for more information
* spbc and tpbc are valid
*/
sfbt = getnn(cmdp->cpb, out_sfbt); /* Table 6-4 */
subc = getnn(cmdp->cpb, out_subc); /* Table 6-4 */
spbc = get32(cmdp->cpb, out_spbc_decomp);
tpbc = get32(cmdp->crb.csb, tpbc);
assert(target_max >= tpbc);
goto ok_cc3; /* not an error */
} else {
/* History length error when CE(1)=1 CE(0)=0. */
rc = -1;
fprintf(stderr, "history length error cc= %d\n", cc);
goto err5;
}
case ERR_NX_TARGET_SPACE:
/* Target buffer not large enough; retry smaller input
* data; give at least 1 byte. SPBC/TPBC are not valid.
*/
assert(source_sz > history_len);
source_sz = ((source_sz - history_len + 2) / 2) + history_len;
NXPRT(fprintf(stderr, "ERR_NX_TARGET_SPACE; retry with "));
NXPRT(fprintf(stderr, "smaller input data src %d hist %d\n",
source_sz, history_len));
goto restart_nx;
case ERR_NX_OK:
/* This should not happen for gzip formatted data;
* we need trailing crc and isize
*/
fprintf(stderr, "ERR_NX_OK\n");
spbc = get32(cmdp->cpb, out_spbc_decomp);
tpbc = get32(cmdp->crb.csb, tpbc);
assert(target_max >= tpbc);
assert(spbc >= history_len);
source_sz = spbc - history_len;
goto offsets_state;
default:
fprintf(stderr, "error: cc= %d\n", cc);
rc = -1;
goto err5;
}
ok_cc3:
NXPRT(fprintf(stderr, "cc3: sfbt: %x\n", sfbt));
assert(spbc > history_len);
source_sz = spbc - history_len;
/* Table 6-4: Source Final Block Type (SFBT) describes the
* last processed deflate block and clues the software how to
* resume the next job. SUBC indicates how many input bits NX
* consumed but did not process. SPBC indicates how many
* bytes of source were given to the accelerator including
* history bytes.
*/
switch (sfbt) {
int dhtlen;
case 0x0: /* Deflate final EOB received */
/* Calculating the checksum start position. */
source_sz = source_sz - subc / 8;
is_final = 1;
break;
/* Resume decompression cases are below. Basically
* indicates where NX has suspended and how to resume
* the input stream.
*/
case 0x8: /* Within a literal block; use rembytecount */
case 0x9: /* Within a literal block; use rembytecount; bfinal=1 */
/* Supply the partially processed source byte again */
source_sz = source_sz - ((subc + 7) / 8);
/* SUBC LS 3bits: number of bits in the first source byte need
* to be processed.
* 000 means all 8 bits; Table 6-3
* Clear subc, histlen, sfbt, rembytecnt, dhtlen
*/
cmdp->cpb.in_subc = 0;
cmdp->cpb.in_sfbt = 0;
putnn(cmdp->cpb, in_subc, subc % 8);
putnn(cmdp->cpb, in_sfbt, sfbt);
putnn(cmdp->cpb, in_rembytecnt, getnn(cmdp->cpb,
out_rembytecnt));
break;
case 0xA: /* Within a FH block; */
case 0xB: /* Within a FH block; bfinal=1 */
source_sz = source_sz - ((subc + 7) / 8);
/* Clear subc, histlen, sfbt, rembytecnt, dhtlen */
cmdp->cpb.in_subc = 0;
cmdp->cpb.in_sfbt = 0;
putnn(cmdp->cpb, in_subc, subc % 8);
putnn(cmdp->cpb, in_sfbt, sfbt);
break;
case 0xC: /* Within a DH block; */
case 0xD: /* Within a DH block; bfinal=1 */
source_sz = source_sz - ((subc + 7) / 8);
/* Clear subc, histlen, sfbt, rembytecnt, dhtlen */
cmdp->cpb.in_subc = 0;
cmdp->cpb.in_sfbt = 0;
putnn(cmdp->cpb, in_subc, subc % 8);
putnn(cmdp->cpb, in_sfbt, sfbt);
dhtlen = getnn(cmdp->cpb, out_dhtlen);
putnn(cmdp->cpb, in_dhtlen, dhtlen);
assert(dhtlen >= 42);
/* Round up to a qword */
dhtlen = (dhtlen + 127) / 128;
while (dhtlen > 0) { /* Copy dht from cpb.out to cpb.in */
--dhtlen;
cmdp->cpb.in_dht[dhtlen] = cmdp->cpb.out_dht[dhtlen];
}
break;
case 0xE: /* Within a block header; bfinal=0; */
/* Also given if source data exactly ends (SUBC=0) with
* EOB code with BFINAL=0. Means the next byte will
* contain a block header.
*/
case 0xF: /* within a block header with BFINAL=1. */
source_sz = source_sz - ((subc + 7) / 8);
/* Clear subc, histlen, sfbt, rembytecnt, dhtlen */
cmdp->cpb.in_subc = 0;
cmdp->cpb.in_sfbt = 0;
putnn(cmdp->cpb, in_subc, subc % 8);
putnn(cmdp->cpb, in_sfbt, sfbt);
/* Engine did not process any data */
if (is_eof && (source_sz == 0))
is_final = 1;
}
offsets_state:
/* Adjust the source and target buffer offsets and lengths */
NXPRT(fprintf(stderr, "offsets_state:\n"));
/* Delete input data from fifo_in */
used_in = used_in - source_sz;
cur_in = (cur_in + source_sz) % fifo_in_len;
input_file_offset = input_file_offset + source_sz;
/* Add output data to fifo_out */
used_out = used_out + tpbc;
assert(used_out <= fifo_out_len);
total_out = total_out + tpbc;
/* Deflate history is 32KB max. No need to supply more
* than 32KB on a resume.
*/
history_len = (total_out > window_max) ? window_max : total_out;
/* To estimate expected expansion in the next NX job; 500 means 50%.
* Deflate best case is around 1 to 1000.
*/
last_comp_ratio = (1000UL * ((uint64_t)source_sz + 1))
/ ((uint64_t)tpbc + 1);
last_comp_ratio = NX_MAX(NX_MIN(1000UL, last_comp_ratio), 1);
NXPRT(fprintf(stderr, "comp_ratio %ld source_sz %d spbc %d tpbc %d\n",
last_comp_ratio, source_sz, spbc, tpbc));
resuming = 1;
finish_state:
NXPRT(fprintf(stderr, "finish_state:\n"));
if (is_final) {
if (used_out)
goto write_state; /* More data to write out */
else if (used_in < 8) {
/* Need at least 8 more bytes containing gzip crc
* and isize.
*/
rc = -1;
goto err4;
} else {
/* Compare checksums and exit */
int i;
unsigned char tail[8];
uint32_t cksum, isize;
for (i = 0; i < 8; i++)
tail[i] = fifo_in[(cur_in + i) % fifo_in_len];
fprintf(stderr, "computed checksum %08x isize %08x\n",
cmdp->cpb.out_crc, (uint32_t) (total_out
% (1ULL<<32)));
cksum = ((uint32_t) tail[0] | (uint32_t) tail[1]<<8
| (uint32_t) tail[2]<<16
| (uint32_t) tail[3]<<24);
isize = ((uint32_t) tail[4] | (uint32_t) tail[5]<<8
| (uint32_t) tail[6]<<16
| (uint32_t) tail[7]<<24);
fprintf(stderr, "stored checksum %08x isize %08x\n",
cksum, isize);
if (cksum == cmdp->cpb.out_crc && isize == (uint32_t)
(total_out % (1ULL<<32))) {
rc = 0; goto ok1;
} else {
rc = -1; goto err4;
}
}
} else
goto read_state;
return -1;
err1:
fprintf(stderr, "error: not a gzip file, expect %x, read %x\n",
expect, c);
return -1;
err2:
fprintf(stderr, "error: the FLG byte is wrong or not being handled\n");
return -1;
err3:
fprintf(stderr, "error: gzip header\n");
return -1;
err4:
fprintf(stderr, "error: checksum missing or mismatch\n");
err5:
ok1:
fprintf(stderr, "decomp is complete: fclose\n");
fclose(outf);
return rc;
}
int main(int argc, char **argv)
{
int rc;
struct sigaction act;
void *handle;
nx_dbg = 0;
nx_gzip_log = NULL;
act.sa_handler = 0;
act.sa_sigaction = nxu_sigsegv_handler;
act.sa_flags = SA_SIGINFO;
act.sa_restorer = 0;
sigemptyset(&act.sa_mask);
sigaction(SIGSEGV, &act, NULL);
handle = nx_function_begin(NX_FUNC_COMP_GZIP, 0);
if (!handle) {
fprintf(stderr, "Unable to init NX, errno %d\n", errno);
exit(-1);
}
rc = decompress_file(argc, argv, handle);
nx_function_end(handle);
return rc;
}
......@@ -26,6 +26,7 @@ function test_sizes
echo "Testing $size ($n) ..."
dd if=/dev/urandom of=$fname bs=$size count=1
./gzfht_test $fname
./gunz_test ${fname}.nx.gz
done
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment