Commit 8459b544 authored by Geordan Neukum's avatar Geordan Neukum Committed by Greg Kroah-Hartman

staging: kpc2000: kpc_i2c: reindent i2c_driver.c

i2c_driver.c uses a mixture of space and tab indentations which
conflicts with the kernel coding style guide. Reindent i2c_driver.c.
Signed-off-by: default avatarGeordan Neukum <gneukum1@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 276accf2
// SPDX-License-Identifier: GPL-2.0+
/* Copyright (c) 2014-2018 Daktronics,
Matt Sickler <matt.sickler@daktronics.com>,
Jordon Hofer <jordon.hofer@daktronics.com>
Matt Sickler <matt.sickler@daktronics.com>,
Jordon Hofer <jordon.hofer@daktronics.com>
Adapted i2c-i801.c for use with Kadoka hardware.
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
<mdsxyz123@yahoo.com>
Copyright (C) 2007 - 2012 Jean Delvare <khali@linux-fr.org>
Copyright (C) 2010 Intel Corporation,
David Woodhouse <dwmw2@infradead.org>
David Woodhouse <dwmw2@infradead.org>
*/
#include <linux/init.h>
#include <linux/module.h>
......@@ -29,11 +29,11 @@ MODULE_AUTHOR("Matt.Sickler@Daktronics.com");
MODULE_SOFTDEP("pre: i2c-dev");
struct i2c_device {
unsigned long smba;
struct i2c_adapter adapter;
struct platform_device *pldev;
struct rw_semaphore rw_sem;
unsigned int features;
unsigned long smba;
struct i2c_adapter adapter;
struct platform_device *pldev;
struct rw_semaphore rw_sem;
unsigned int features;
};
/*****************************
......@@ -134,479 +134,479 @@ MODULE_PARM_DESC(disable_features, "Disable selected driver features");
Return 0 if it is, -EBUSY if it is not. */
static int i801_check_pre(struct i2c_device *priv)
{
int status;
dev_dbg(&priv->adapter.dev, "i801_check_pre\n");
status = inb_p(SMBHSTSTS(priv));
if (status & SMBHSTSTS_HOST_BUSY) {
dev_err(&priv->adapter.dev, "SMBus is busy, can't use it! (status=%x)\n", status);
return -EBUSY;
}
status &= STATUS_FLAGS;
if (status) {
//dev_dbg(&priv->adapter.dev, "Clearing status flags (%02x)\n", status);
outb_p(status, SMBHSTSTS(priv));
status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
if (status) {
dev_err(&priv->adapter.dev, "Failed clearing status flags (%02x)\n", status);
return -EBUSY;
}
}
return 0;
int status;
dev_dbg(&priv->adapter.dev, "i801_check_pre\n");
status = inb_p(SMBHSTSTS(priv));
if (status & SMBHSTSTS_HOST_BUSY) {
dev_err(&priv->adapter.dev, "SMBus is busy, can't use it! (status=%x)\n", status);
return -EBUSY;
}
status &= STATUS_FLAGS;
if (status) {
//dev_dbg(&priv->adapter.dev, "Clearing status flags (%02x)\n", status);
outb_p(status, SMBHSTSTS(priv));
status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
if (status) {
dev_err(&priv->adapter.dev, "Failed clearing status flags (%02x)\n", status);
return -EBUSY;
}
}
return 0;
}
/* Convert the status register to an error code, and clear it. */
static int i801_check_post(struct i2c_device *priv, int status, int timeout)
{
int result = 0;
dev_dbg(&priv->adapter.dev, "i801_check_post\n");
/* If the SMBus is still busy, we give up */
if (timeout) {
dev_err(&priv->adapter.dev, "Transaction timeout\n");
/* try to stop the current command */
dev_dbg(&priv->adapter.dev, "Terminating the current operation\n");
outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, SMBHSTCNT(priv));
usleep_range(1000, 2000);
outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), SMBHSTCNT(priv));
/* Check if it worked */
status = inb_p(SMBHSTSTS(priv));
if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED)) {
dev_err(&priv->adapter.dev, "Failed terminating the transaction\n");
}
outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
return -ETIMEDOUT;
}
if (status & SMBHSTSTS_FAILED) {
result = -EIO;
dev_err(&priv->adapter.dev, "Transaction failed\n");
}
if (status & SMBHSTSTS_DEV_ERR) {
result = -ENXIO;
dev_dbg(&priv->adapter.dev, "No response\n");
}
if (status & SMBHSTSTS_BUS_ERR) {
result = -EAGAIN;
dev_dbg(&priv->adapter.dev, "Lost arbitration\n");
}
if (result) {
/* Clear error flags */
outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
if (status) {
dev_warn(&priv->adapter.dev, "Failed clearing status flags at end of transaction (%02x)\n", status);
}
}
return result;
int result = 0;
dev_dbg(&priv->adapter.dev, "i801_check_post\n");
/* If the SMBus is still busy, we give up */
if (timeout) {
dev_err(&priv->adapter.dev, "Transaction timeout\n");
/* try to stop the current command */
dev_dbg(&priv->adapter.dev, "Terminating the current operation\n");
outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, SMBHSTCNT(priv));
usleep_range(1000, 2000);
outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), SMBHSTCNT(priv));
/* Check if it worked */
status = inb_p(SMBHSTSTS(priv));
if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED)) {
dev_err(&priv->adapter.dev, "Failed terminating the transaction\n");
}
outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
return -ETIMEDOUT;
}
if (status & SMBHSTSTS_FAILED) {
result = -EIO;
dev_err(&priv->adapter.dev, "Transaction failed\n");
}
if (status & SMBHSTSTS_DEV_ERR) {
result = -ENXIO;
dev_dbg(&priv->adapter.dev, "No response\n");
}
if (status & SMBHSTSTS_BUS_ERR) {
result = -EAGAIN;
dev_dbg(&priv->adapter.dev, "Lost arbitration\n");
}
if (result) {
/* Clear error flags */
outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
if (status) {
dev_warn(&priv->adapter.dev, "Failed clearing status flags at end of transaction (%02x)\n", status);
}
}
return result;
}
static int i801_transaction(struct i2c_device *priv, int xact)
{
int status;
int result;
int timeout = 0;
dev_dbg(&priv->adapter.dev, "i801_transaction\n");
result = i801_check_pre(priv);
if (result < 0) {
return result;
}
/* the current contents of SMBHSTCNT can be overwritten, since PEC,
* INTREN, SMBSCMD are passed in xact */
outb_p(xact | I801_START, SMBHSTCNT(priv));
/* We will always wait for a fraction of a second! */
do {
usleep_range(250, 500);
status = inb_p(SMBHSTSTS(priv));
} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES));
result = i801_check_post(priv, status, timeout > MAX_RETRIES);
if (result < 0) {
return result;
}
outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
return 0;
int status;
int result;
int timeout = 0;
dev_dbg(&priv->adapter.dev, "i801_transaction\n");
result = i801_check_pre(priv);
if (result < 0) {
return result;
}
/* the current contents of SMBHSTCNT can be overwritten, since PEC,
* INTREN, SMBSCMD are passed in xact */
outb_p(xact | I801_START, SMBHSTCNT(priv));
/* We will always wait for a fraction of a second! */
do {
usleep_range(250, 500);
status = inb_p(SMBHSTSTS(priv));
} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES));
result = i801_check_post(priv, status, timeout > MAX_RETRIES);
if (result < 0) {
return result;
}
outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
return 0;
}
/* wait for INTR bit as advised by Intel */
static void i801_wait_hwpec(struct i2c_device *priv)
{
int timeout = 0;
int status;
dev_dbg(&priv->adapter.dev, "i801_wait_hwpec\n");
do {
usleep_range(250, 500);
status = inb_p(SMBHSTSTS(priv));
} while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_RETRIES));
if (timeout > MAX_RETRIES) {
dev_dbg(&priv->adapter.dev, "PEC Timeout!\n");
}
outb_p(status, SMBHSTSTS(priv));
int timeout = 0;
int status;
dev_dbg(&priv->adapter.dev, "i801_wait_hwpec\n");
do {
usleep_range(250, 500);
status = inb_p(SMBHSTSTS(priv));
} while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_RETRIES));
if (timeout > MAX_RETRIES) {
dev_dbg(&priv->adapter.dev, "PEC Timeout!\n");
}
outb_p(status, SMBHSTSTS(priv));
}
static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_smbus_data *data, char read_write, int hwpec)
{
int i, len;
int status;
dev_dbg(&priv->adapter.dev, "i801_block_transaction_by_block\n");
inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
/* Use 32-byte buffer to process this transaction */
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
outb_p(len, SMBHSTDAT0(priv));
for (i = 0; i < len; i++) {
outb_p(data->block[i+1], SMBBLKDAT(priv));
}
}
status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | I801_PEC_EN * hwpec);
if (status) {
return status;
}
if (read_write == I2C_SMBUS_READ) {
len = inb_p(SMBHSTDAT0(priv));
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
return -EPROTO;
}
data->block[0] = len;
for (i = 0; i < len; i++) {
data->block[i + 1] = inb_p(SMBBLKDAT(priv));
}
}
return 0;
int i, len;
int status;
dev_dbg(&priv->adapter.dev, "i801_block_transaction_by_block\n");
inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
/* Use 32-byte buffer to process this transaction */
if (read_write == I2C_SMBUS_WRITE) {
len = data->block[0];
outb_p(len, SMBHSTDAT0(priv));
for (i = 0; i < len; i++) {
outb_p(data->block[i+1], SMBBLKDAT(priv));
}
}
status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | I801_PEC_EN * hwpec);
if (status) {
return status;
}
if (read_write == I2C_SMBUS_READ) {
len = inb_p(SMBHSTDAT0(priv));
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
return -EPROTO;
}
data->block[0] = len;
for (i = 0; i < len; i++) {
data->block[i + 1] = inb_p(SMBBLKDAT(priv));
}
}
return 0;
}
static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2c_smbus_data *data, char read_write, int command, int hwpec)
{
int i, len;
int smbcmd;
int status;
int result;
int timeout;
dev_dbg(&priv->adapter.dev, "i801_block_transaction_byte_by_byte\n");
result = i801_check_pre(priv);
if (result < 0) {
return result;
}
len = data->block[0];
if (read_write == I2C_SMBUS_WRITE) {
outb_p(len, SMBHSTDAT0(priv));
outb_p(data->block[1], SMBBLKDAT(priv));
}
for (i = 1; i <= len; i++) {
if (i == len && read_write == I2C_SMBUS_READ) {
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
smbcmd = I801_I2C_BLOCK_LAST;
} else {
smbcmd = I801_BLOCK_LAST;
}
} else {
if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_READ) {
smbcmd = I801_I2C_BLOCK_DATA;
} else {
smbcmd = I801_BLOCK_DATA;
}
}
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
if (i == 1) {
outb_p(inb(SMBHSTCNT(priv)) | I801_START, SMBHSTCNT(priv));
}
/* We will always wait for a fraction of a second! */
timeout = 0;
do {
usleep_range(250, 500);
status = inb_p(SMBHSTSTS(priv));
} while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_RETRIES));
result = i801_check_post(priv, status, timeout > MAX_RETRIES);
if (result < 0) {
return result;
}
if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
len = inb_p(SMBHSTDAT0(priv));
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
dev_err(&priv->adapter.dev, "Illegal SMBus block read size %d\n", len);
/* Recover */
while (inb_p(SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY) {
outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
}
outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
return -EPROTO;
}
data->block[0] = len;
}
/* Retrieve/store value in SMBBLKDAT */
if (read_write == I2C_SMBUS_READ) {
data->block[i] = inb_p(SMBBLKDAT(priv));
}
if (read_write == I2C_SMBUS_WRITE && i+1 <= len) {
outb_p(data->block[i+1], SMBBLKDAT(priv));
}
/* signals SMBBLKDAT ready */
outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
}
return 0;
int i, len;
int smbcmd;
int status;
int result;
int timeout;
dev_dbg(&priv->adapter.dev, "i801_block_transaction_byte_by_byte\n");
result = i801_check_pre(priv);
if (result < 0) {
return result;
}
len = data->block[0];
if (read_write == I2C_SMBUS_WRITE) {
outb_p(len, SMBHSTDAT0(priv));
outb_p(data->block[1], SMBBLKDAT(priv));
}
for (i = 1; i <= len; i++) {
if (i == len && read_write == I2C_SMBUS_READ) {
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
smbcmd = I801_I2C_BLOCK_LAST;
} else {
smbcmd = I801_BLOCK_LAST;
}
} else {
if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_READ) {
smbcmd = I801_I2C_BLOCK_DATA;
} else {
smbcmd = I801_BLOCK_DATA;
}
}
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
if (i == 1) {
outb_p(inb(SMBHSTCNT(priv)) | I801_START, SMBHSTCNT(priv));
}
/* We will always wait for a fraction of a second! */
timeout = 0;
do {
usleep_range(250, 500);
status = inb_p(SMBHSTSTS(priv));
} while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_RETRIES));
result = i801_check_post(priv, status, timeout > MAX_RETRIES);
if (result < 0) {
return result;
}
if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
len = inb_p(SMBHSTDAT0(priv));
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
dev_err(&priv->adapter.dev, "Illegal SMBus block read size %d\n", len);
/* Recover */
while (inb_p(SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY) {
outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
}
outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
return -EPROTO;
}
data->block[0] = len;
}
/* Retrieve/store value in SMBBLKDAT */
if (read_write == I2C_SMBUS_READ) {
data->block[i] = inb_p(SMBBLKDAT(priv));
}
if (read_write == I2C_SMBUS_WRITE && i+1 <= len) {
outb_p(data->block[i+1], SMBBLKDAT(priv));
}
/* signals SMBBLKDAT ready */
outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
}
return 0;
}
static int i801_set_block_buffer_mode(struct i2c_device *priv)
{
dev_dbg(&priv->adapter.dev, "i801_set_block_buffer_mode\n");
outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0) {
return -EIO;
}
return 0;
dev_dbg(&priv->adapter.dev, "i801_set_block_buffer_mode\n");
outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0) {
return -EIO;
}
return 0;
}
/* Block transaction function */
static int i801_block_transaction(struct i2c_device *priv, union i2c_smbus_data *data, char read_write, int command, int hwpec)
{
int result = 0;
//unsigned char hostc;
dev_dbg(&priv->adapter.dev, "i801_block_transaction\n");
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
if (read_write == I2C_SMBUS_WRITE) {
/* set I2C_EN bit in configuration register */
//TODO: Figure out the right thing to do here...
//pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
//pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN);
} else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
dev_err(&priv->adapter.dev, "I2C block read is unsupported!\n");
return -EOPNOTSUPP;
}
}
if (read_write == I2C_SMBUS_WRITE || command == I2C_SMBUS_I2C_BLOCK_DATA) {
if (data->block[0] < 1) {
data->block[0] = 1;
}
if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
data->block[0] = I2C_SMBUS_BLOCK_MAX;
}
} else {
data->block[0] = 32; /* max for SMBus block reads */
}
/* Experience has shown that the block buffer can only be used for
SMBus (not I2C) block transactions, even though the datasheet
doesn't mention this limitation. */
if ((priv->features & FEATURE_BLOCK_BUFFER) && command != I2C_SMBUS_I2C_BLOCK_DATA && i801_set_block_buffer_mode(priv) == 0) {
result = i801_block_transaction_by_block(priv, data, read_write, hwpec);
} else {
result = i801_block_transaction_byte_by_byte(priv, data, read_write, command, hwpec);
}
if (result == 0 && hwpec) {
i801_wait_hwpec(priv);
}
if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_WRITE) {
/* restore saved configuration register value */
//TODO: Figure out the right thing to do here...
//pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
}
return result;
int result = 0;
//unsigned char hostc;
dev_dbg(&priv->adapter.dev, "i801_block_transaction\n");
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
if (read_write == I2C_SMBUS_WRITE) {
/* set I2C_EN bit in configuration register */
//TODO: Figure out the right thing to do here...
//pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
//pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN);
} else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
dev_err(&priv->adapter.dev, "I2C block read is unsupported!\n");
return -EOPNOTSUPP;
}
}
if (read_write == I2C_SMBUS_WRITE || command == I2C_SMBUS_I2C_BLOCK_DATA) {
if (data->block[0] < 1) {
data->block[0] = 1;
}
if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
data->block[0] = I2C_SMBUS_BLOCK_MAX;
}
} else {
data->block[0] = 32; /* max for SMBus block reads */
}
/* Experience has shown that the block buffer can only be used for
SMBus (not I2C) block transactions, even though the datasheet
doesn't mention this limitation. */
if ((priv->features & FEATURE_BLOCK_BUFFER) && command != I2C_SMBUS_I2C_BLOCK_DATA && i801_set_block_buffer_mode(priv) == 0) {
result = i801_block_transaction_by_block(priv, data, read_write, hwpec);
} else {
result = i801_block_transaction_byte_by_byte(priv, data, read_write, command, hwpec);
}
if (result == 0 && hwpec) {
i801_wait_hwpec(priv);
}
if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_WRITE) {
/* restore saved configuration register value */
//TODO: Figure out the right thing to do here...
//pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
}
return result;
}
/* Return negative errno on error. */
static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data)
{
int hwpec;
int block = 0;
int ret, xact = 0;
struct i2c_device *priv = i2c_get_adapdata(adap);
dev_dbg(&priv->adapter.dev, "i801_access (addr=%0d) flags=%x read_write=%x command=%x size=%x",
addr, flags, read_write, command, size );
hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA;
switch (size) {
case I2C_SMBUS_QUICK:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_QUICK\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
xact = I801_QUICK;
break;
case I2C_SMBUS_BYTE:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
if (read_write == I2C_SMBUS_WRITE) {
outb_p(command, SMBHSTCMD(priv));
}
xact = I801_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE_DATA\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
outb_p(command, SMBHSTCMD(priv));
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->byte, SMBHSTDAT0(priv));
}
xact = I801_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_WORD_DATA\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
outb_p(command, SMBHSTCMD(priv));
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->word & 0xff, SMBHSTDAT0(priv));
outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
}
xact = I801_WORD_DATA;
break;
case I2C_SMBUS_BLOCK_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BLOCK_DATA\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
outb_p(command, SMBHSTCMD(priv));
block = 1;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_I2C_BLOCK_DATA\n");
/* NB: page 240 of ICH5 datasheet shows that the R/#W
* bit should be cleared here, even when reading */
outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
if (read_write == I2C_SMBUS_READ) {
/* NB: page 240 of ICH5 datasheet also shows
* that DATA1 is the cmd field when reading */
outb_p(command, SMBHSTDAT1(priv));
} else {
outb_p(command, SMBHSTCMD(priv));
}
block = 1;
break;
default:
dev_dbg(&priv->adapter.dev, " [acc] Unsupported transaction %d\n", size);
return -EOPNOTSUPP;
}
if (hwpec) { /* enable/disable hardware PEC */
dev_dbg(&priv->adapter.dev, " [acc] hwpec: yes\n");
outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
} else {
dev_dbg(&priv->adapter.dev, " [acc] hwpec: no\n");
outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), SMBAUXCTL(priv));
}
if (block) {
//ret = 0;
dev_dbg(&priv->adapter.dev, " [acc] block: yes\n");
ret = i801_block_transaction(priv, data, read_write, size, hwpec);
} else {
dev_dbg(&priv->adapter.dev, " [acc] block: no\n");
ret = i801_transaction(priv, xact | ENABLE_INT9);
}
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
time, so we forcibly disable it after every transaction. Turn off
E32B for the same reason. */
if (hwpec || block) {
dev_dbg(&priv->adapter.dev, " [acc] hwpec || block\n");
outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
}
if (block) {
dev_dbg(&priv->adapter.dev, " [acc] block\n");
return ret;
}
if (ret) {
dev_dbg(&priv->adapter.dev, " [acc] ret %d\n", ret);
return ret;
}
if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) {
dev_dbg(&priv->adapter.dev, " [acc] I2C_SMBUS_WRITE || I801_QUICK -> ret 0\n");
return 0;
}
switch (xact & 0x7f) {
case I801_BYTE: /* Result put in SMBHSTDAT0 */
case I801_BYTE_DATA:
dev_dbg(&priv->adapter.dev, " [acc] I801_BYTE or I801_BYTE_DATA\n");
data->byte = inb_p(SMBHSTDAT0(priv));
break;
case I801_WORD_DATA:
dev_dbg(&priv->adapter.dev, " [acc] I801_WORD_DATA\n");
data->word = inb_p(SMBHSTDAT0(priv)) + (inb_p(SMBHSTDAT1(priv)) << 8);
break;
}
return 0;
int hwpec;
int block = 0;
int ret, xact = 0;
struct i2c_device *priv = i2c_get_adapdata(adap);
dev_dbg(&priv->adapter.dev, "i801_access (addr=%0d) flags=%x read_write=%x command=%x size=%x",
addr, flags, read_write, command, size );
hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA;
switch (size) {
case I2C_SMBUS_QUICK:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_QUICK\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
xact = I801_QUICK;
break;
case I2C_SMBUS_BYTE:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
if (read_write == I2C_SMBUS_WRITE) {
outb_p(command, SMBHSTCMD(priv));
}
xact = I801_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE_DATA\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
outb_p(command, SMBHSTCMD(priv));
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->byte, SMBHSTDAT0(priv));
}
xact = I801_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_WORD_DATA\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
outb_p(command, SMBHSTCMD(priv));
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->word & 0xff, SMBHSTDAT0(priv));
outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
}
xact = I801_WORD_DATA;
break;
case I2C_SMBUS_BLOCK_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BLOCK_DATA\n");
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
outb_p(command, SMBHSTCMD(priv));
block = 1;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_I2C_BLOCK_DATA\n");
/* NB: page 240 of ICH5 datasheet shows that the R/#W
* bit should be cleared here, even when reading */
outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
if (read_write == I2C_SMBUS_READ) {
/* NB: page 240 of ICH5 datasheet also shows
* that DATA1 is the cmd field when reading */
outb_p(command, SMBHSTDAT1(priv));
} else {
outb_p(command, SMBHSTCMD(priv));
}
block = 1;
break;
default:
dev_dbg(&priv->adapter.dev, " [acc] Unsupported transaction %d\n", size);
return -EOPNOTSUPP;
}
if (hwpec) { /* enable/disable hardware PEC */
dev_dbg(&priv->adapter.dev, " [acc] hwpec: yes\n");
outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
} else {
dev_dbg(&priv->adapter.dev, " [acc] hwpec: no\n");
outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), SMBAUXCTL(priv));
}
if (block) {
//ret = 0;
dev_dbg(&priv->adapter.dev, " [acc] block: yes\n");
ret = i801_block_transaction(priv, data, read_write, size, hwpec);
} else {
dev_dbg(&priv->adapter.dev, " [acc] block: no\n");
ret = i801_transaction(priv, xact | ENABLE_INT9);
}
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
time, so we forcibly disable it after every transaction. Turn off
E32B for the same reason. */
if (hwpec || block) {
dev_dbg(&priv->adapter.dev, " [acc] hwpec || block\n");
outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
}
if (block) {
dev_dbg(&priv->adapter.dev, " [acc] block\n");
return ret;
}
if (ret) {
dev_dbg(&priv->adapter.dev, " [acc] ret %d\n", ret);
return ret;
}
if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) {
dev_dbg(&priv->adapter.dev, " [acc] I2C_SMBUS_WRITE || I801_QUICK -> ret 0\n");
return 0;
}
switch (xact & 0x7f) {
case I801_BYTE: /* Result put in SMBHSTDAT0 */
case I801_BYTE_DATA:
dev_dbg(&priv->adapter.dev, " [acc] I801_BYTE or I801_BYTE_DATA\n");
data->byte = inb_p(SMBHSTDAT0(priv));
break;
case I801_WORD_DATA:
dev_dbg(&priv->adapter.dev, " [acc] I801_WORD_DATA\n");
data->word = inb_p(SMBHSTDAT0(priv)) + (inb_p(SMBHSTDAT1(priv)) << 8);
break;
}
return 0;
}
static u32 i801_func(struct i2c_adapter *adapter)
{
struct i2c_device *priv = i2c_get_adapdata(adapter);
/* original settings
u32 f = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
((priv->features & FEATURE_I2C_BLOCK_READ) ?
I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
*/
// http://lxr.free-electrons.com/source/include/uapi/linux/i2c.h#L85
u32 f =
I2C_FUNC_I2C | /* 0x00000001 (I enabled this one) */
!I2C_FUNC_10BIT_ADDR | /* 0x00000002 */
!I2C_FUNC_PROTOCOL_MANGLING | /* 0x00000004 */
((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | /* 0x00000008 */
!I2C_FUNC_SMBUS_BLOCK_PROC_CALL | /* 0x00008000 */
I2C_FUNC_SMBUS_QUICK | /* 0x00010000 */
!I2C_FUNC_SMBUS_READ_BYTE | /* 0x00020000 */
!I2C_FUNC_SMBUS_WRITE_BYTE | /* 0x00040000 */
!I2C_FUNC_SMBUS_READ_BYTE_DATA | /* 0x00080000 */
!I2C_FUNC_SMBUS_WRITE_BYTE_DATA | /* 0x00100000 */
!I2C_FUNC_SMBUS_READ_WORD_DATA | /* 0x00200000 */
!I2C_FUNC_SMBUS_WRITE_WORD_DATA | /* 0x00400000 */
!I2C_FUNC_SMBUS_PROC_CALL | /* 0x00800000 */
!I2C_FUNC_SMBUS_READ_BLOCK_DATA | /* 0x01000000 */
!I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | /* 0x02000000 */
((priv->features & FEATURE_I2C_BLOCK_READ) ? I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) | /* 0x04000000 */
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | /* 0x08000000 */
I2C_FUNC_SMBUS_BYTE | /* _READ_BYTE _WRITE_BYTE */
I2C_FUNC_SMBUS_BYTE_DATA | /* _READ_BYTE_DATA _WRITE_BYTE_DATA */
I2C_FUNC_SMBUS_WORD_DATA | /* _READ_WORD_DATA _WRITE_WORD_DATA */
I2C_FUNC_SMBUS_BLOCK_DATA | /* _READ_BLOCK_DATA _WRITE_BLOCK_DATA */
!I2C_FUNC_SMBUS_I2C_BLOCK | /* _READ_I2C_BLOCK _WRITE_I2C_BLOCK */
!I2C_FUNC_SMBUS_EMUL; /* _QUICK _BYTE _BYTE_DATA _WORD_DATA _PROC_CALL _WRITE_BLOCK_DATA _I2C_BLOCK _PEC */
return f;
struct i2c_device *priv = i2c_get_adapdata(adapter);
/* original settings
u32 f = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
((priv->features & FEATURE_I2C_BLOCK_READ) ?
I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
*/
// http://lxr.free-electrons.com/source/include/uapi/linux/i2c.h#L85
u32 f =
I2C_FUNC_I2C | /* 0x00000001 (I enabled this one) */
!I2C_FUNC_10BIT_ADDR | /* 0x00000002 */
!I2C_FUNC_PROTOCOL_MANGLING | /* 0x00000004 */
((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | /* 0x00000008 */
!I2C_FUNC_SMBUS_BLOCK_PROC_CALL | /* 0x00008000 */
I2C_FUNC_SMBUS_QUICK | /* 0x00010000 */
!I2C_FUNC_SMBUS_READ_BYTE | /* 0x00020000 */
!I2C_FUNC_SMBUS_WRITE_BYTE | /* 0x00040000 */
!I2C_FUNC_SMBUS_READ_BYTE_DATA | /* 0x00080000 */
!I2C_FUNC_SMBUS_WRITE_BYTE_DATA | /* 0x00100000 */
!I2C_FUNC_SMBUS_READ_WORD_DATA | /* 0x00200000 */
!I2C_FUNC_SMBUS_WRITE_WORD_DATA | /* 0x00400000 */
!I2C_FUNC_SMBUS_PROC_CALL | /* 0x00800000 */
!I2C_FUNC_SMBUS_READ_BLOCK_DATA | /* 0x01000000 */
!I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | /* 0x02000000 */
((priv->features & FEATURE_I2C_BLOCK_READ) ? I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) | /* 0x04000000 */
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | /* 0x08000000 */
I2C_FUNC_SMBUS_BYTE | /* _READ_BYTE _WRITE_BYTE */
I2C_FUNC_SMBUS_BYTE_DATA | /* _READ_BYTE_DATA _WRITE_BYTE_DATA */
I2C_FUNC_SMBUS_WORD_DATA | /* _READ_WORD_DATA _WRITE_WORD_DATA */
I2C_FUNC_SMBUS_BLOCK_DATA | /* _READ_BLOCK_DATA _WRITE_BLOCK_DATA */
!I2C_FUNC_SMBUS_I2C_BLOCK | /* _READ_I2C_BLOCK _WRITE_I2C_BLOCK */
!I2C_FUNC_SMBUS_EMUL; /* _QUICK _BYTE _BYTE_DATA _WORD_DATA _PROC_CALL _WRITE_BLOCK_DATA _I2C_BLOCK _PEC */
return f;
}
static const struct i2c_algorithm smbus_algorithm = {
.smbus_xfer = i801_access,
.functionality = i801_func,
.smbus_xfer = i801_access,
.functionality = i801_func,
};
......@@ -616,84 +616,84 @@ static const struct i2c_algorithm smbus_algorithm = {
********************************/
int pi2c_probe(struct platform_device *pldev)
{
int err;
struct i2c_device *priv;
struct resource *res;
dev_dbg(&pldev->dev, "pi2c_probe(pldev = %p '%s')\n", pldev, pldev->name);
priv = kzalloc(sizeof(struct i2c_device), GFP_KERNEL);
if (!priv) {
return -ENOMEM;
}
i2c_set_adapdata(&priv->adapter, priv);
priv->adapter.owner = THIS_MODULE;
priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
priv->adapter.algo = &smbus_algorithm;
res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
priv->smba = (unsigned long)ioremap_nocache(res->start, resource_size(res));
priv->pldev = pldev;
pldev->dev.platform_data = priv;
priv->features |= FEATURE_IDF;
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_SMBUS_PEC;
priv->features |= FEATURE_BLOCK_BUFFER;
//init_MUTEX(&lddata->sem);
init_rwsem(&priv->rw_sem);
/* set up the sysfs linkage to our parent device */
priv->adapter.dev.parent = &pldev->dev;
/* Retry up to 3 times on lost arbitration */
priv->adapter.retries = 3;
//snprintf(priv->adapter.name, sizeof(priv->adapter.name), "Fake SMBus I801 adapter at %04lx", priv->smba);
snprintf(priv->adapter.name, sizeof(priv->adapter.name), "Fake SMBus I801 adapter");
err = i2c_add_adapter(&priv->adapter);
if (err) {
dev_err(&priv->adapter.dev, "Failed to add SMBus adapter\n");
return err;
}
return 0;
int err;
struct i2c_device *priv;
struct resource *res;
dev_dbg(&pldev->dev, "pi2c_probe(pldev = %p '%s')\n", pldev, pldev->name);
priv = kzalloc(sizeof(struct i2c_device), GFP_KERNEL);
if (!priv) {
return -ENOMEM;
}
i2c_set_adapdata(&priv->adapter, priv);
priv->adapter.owner = THIS_MODULE;
priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
priv->adapter.algo = &smbus_algorithm;
res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
priv->smba = (unsigned long)ioremap_nocache(res->start, resource_size(res));
priv->pldev = pldev;
pldev->dev.platform_data = priv;
priv->features |= FEATURE_IDF;
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_SMBUS_PEC;
priv->features |= FEATURE_BLOCK_BUFFER;
//init_MUTEX(&lddata->sem);
init_rwsem(&priv->rw_sem);
/* set up the sysfs linkage to our parent device */
priv->adapter.dev.parent = &pldev->dev;
/* Retry up to 3 times on lost arbitration */
priv->adapter.retries = 3;
//snprintf(priv->adapter.name, sizeof(priv->adapter.name), "Fake SMBus I801 adapter at %04lx", priv->smba);
snprintf(priv->adapter.name, sizeof(priv->adapter.name), "Fake SMBus I801 adapter");
err = i2c_add_adapter(&priv->adapter);
if (err) {
dev_err(&priv->adapter.dev, "Failed to add SMBus adapter\n");
return err;
}
return 0;
}
int pi2c_remove(struct platform_device *pldev)
{
struct i2c_device *lddev;
dev_dbg(&pldev->dev, "pi2c_remove(pldev = %p '%s')\n", pldev, pldev->name);
lddev = (struct i2c_device *)pldev->dev.platform_data;
i2c_del_adapter(&lddev->adapter);
//TODO: Figure out the right thing to do here...
//pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
//pci_release_region(dev, SMBBAR);
//pci_set_drvdata(dev, NULL);
//cdev_del(&lddev->cdev);
if(lddev != 0) {
kfree(lddev);
pldev->dev.platform_data = 0;
}
return 0;
struct i2c_device *lddev;
dev_dbg(&pldev->dev, "pi2c_remove(pldev = %p '%s')\n", pldev, pldev->name);
lddev = (struct i2c_device *)pldev->dev.platform_data;
i2c_del_adapter(&lddev->adapter);
//TODO: Figure out the right thing to do here...
//pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
//pci_release_region(dev, SMBBAR);
//pci_set_drvdata(dev, NULL);
//cdev_del(&lddev->cdev);
if(lddev != 0) {
kfree(lddev);
pldev->dev.platform_data = 0;
}
return 0;
}
struct platform_driver i2c_plat_driver_i = {
.probe = pi2c_probe,
.remove = pi2c_remove,
.driver = {
.name = KP_DRIVER_NAME_I2C,
.owner = THIS_MODULE,
},
.probe = pi2c_probe,
.remove = pi2c_remove,
.driver = {
.name = KP_DRIVER_NAME_I2C,
.owner = THIS_MODULE,
},
};
module_platform_driver(i2c_plat_driver_i);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment