Skip to content

L
linux
Commit 84fb19e1 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Simon Horman
Browse files
Options

ARM: dts: r8a7793: Add reset control properties 

Add properties to describe the reset topology for on-SoC devices:
  - Add the "#reset-cells" property to the CPG/MSSR device node,
  - Add resets and reset-names properties to the various device nodes.

This allows to reset SoC devices using the Reset Controller API.

Note that resets usually match the corresponding module clocks.
Exceptions are:
  - The audio module has resets for the Serial Sound Interfaces only,
  - The display module has only a single reset for all DU channels, but
    adding reset properties for the display is postponed.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 6e11a322
Hide whitespace changes
Inline Side-by-side
Showing with 62 additions and 0 deletions
arch/arm/boot/dts/r8a7793.dtsi
View file @ 84fb19e1
......@@ -111,6 +111,7 @@ gic: interrupt-controller@f1001000 {
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
gpio0: gpio@e6050000 {
......@@ -124,6 +125,7 @@ gpio0: gpio@e6050000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
......@@ -137,6 +139,7 @@ gpio1: gpio@e6051000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
......@@ -150,6 +153,7 @@ gpio2: gpio@e6052000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
......@@ -163,6 +167,7 @@ gpio3: gpio@e6053000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
......@@ -176,6 +181,7 @@ gpio4: gpio@e6054000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
......@@ -189,6 +195,7 @@ gpio5: gpio@e6055000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 907>;
};
gpio6: gpio@e6055400 {
......@@ -202,6 +209,7 @@ gpio6: gpio@e6055400 {
interrupt-controller;
clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 905>;
};
gpio7: gpio@e6055800 {
......@@ -215,6 +223,7 @@ gpio7: gpio@e6055800 {
interrupt-controller;
clocks = <&cpg CPG_MOD 904>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 904>;
};
thermal: thermal@e61f0000 {
......@@ -225,6 +234,7 @@ thermal: thermal@e61f0000 {
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <0>;
};
......@@ -244,6 +254,7 @@ cmt0: timer@ffca0000 {
clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 124>;
renesas,channels-mask = <0x60>;
......@@ -264,6 +275,7 @@ cmt1: timer@e6130000 {
clocks = <&cpg CPG_MOD 329>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 329>;
renesas,channels-mask = <0xff>;
......@@ -287,6 +299,7 @@ irqc0: interrupt-controller@e61c0000 {
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 407>;
};
dmac0: dma-controller@e6700000 {
......@@ -316,6 +329,7 @@ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
};
......@@ -347,6 +361,7 @@ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
};
......@@ -376,6 +391,7 @@ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <13>;
};
......@@ -405,6 +421,7 @@ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <13>;
};
......@@ -418,6 +435,7 @@ i2c0: i2c@e6508000 {
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 931>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -430,6 +448,7 @@ i2c1: i2c@e6518000 {
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 930>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -442,6 +461,7 @@ i2c2: i2c@e6530000 {
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 929>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -454,6 +474,7 @@ i2c3: i2c@e6540000 {
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 928>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -466,6 +487,7 @@ i2c4: i2c@e6520000 {
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 927>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 927>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -479,6 +501,7 @@ i2c5: i2c@e6528000 {
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 925>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 925>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
......@@ -496,6 +519,7 @@ i2c6: i2c@e60b0000 {
<&dmac1 0x77>, <&dmac1 0x78>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 926>;
status = "disabled";
};
......@@ -511,6 +535,7 @@ i2c7: i2c@e6500000 {
<&dmac1 0x61>, <&dmac1 0x62>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 318>;
status = "disabled";
};
......@@ -526,6 +551,7 @@ i2c8: i2c@e6510000 {
<&dmac1 0x65>, <&dmac1 0x66>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 323>;
status = "disabled";
};
......@@ -544,6 +570,7 @@ sdhi0: sd@ee100000 {
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 314>;
status = "disabled";
};
......@@ -557,6 +584,7 @@ sdhi1: sd@ee140000 {
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 312>;
status = "disabled";
};
......@@ -570,6 +598,7 @@ sdhi2: sd@ee160000 {
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 311>;
status = "disabled";
};
......@@ -582,6 +611,7 @@ mmcif0: mmc@ee200000 {
<&dmac1 0xd1>, <&dmac1 0xd2>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 315>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
......@@ -598,6 +628,7 @@ scifa0: serial@e6c40000 {
<&dmac1 0x21>, <&dmac1 0x22>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 204>;
status = "disabled";
};
......@@ -612,6 +643,7 @@ scifa1: serial@e6c50000 {
<&dmac1 0x25>, <&dmac1 0x26>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 203>;
status = "disabled";
};
......@@ -626,6 +658,7 @@ scifa2: serial@e6c60000 {
<&dmac1 0x27>, <&dmac1 0x28>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 202>;
status = "disabled";
};
......@@ -640,6 +673,7 @@ scifa3: serial@e6c70000 {
<&dmac1 0x1b>, <&dmac1 0x1c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 1106>;
status = "disabled";
};
......@@ -654,6 +688,7 @@ scifa4: serial@e6c78000 {
<&dmac1 0x1f>, <&dmac1 0x20>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 1107>;
status = "disabled";
};
......@@ -668,6 +703,7 @@ scifa5: serial@e6c80000 {
<&dmac1 0x23>, <&dmac1 0x24>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 1108>;
status = "disabled";
};
......@@ -682,6 +718,7 @@ scifb0: serial@e6c20000 {
<&dmac1 0x3d>, <&dmac1 0x3e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 206>;
status = "disabled";
};
......@@ -696,6 +733,7 @@ scifb1: serial@e6c30000 {
<&dmac1 0x19>, <&dmac1 0x1a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 207>;
status = "disabled";
};
......@@ -710,6 +748,7 @@ scifb2: serial@e6ce0000 {
<&dmac1 0x1d>, <&dmac1 0x1e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 216>;
status = "disabled";
};
......@@ -725,6 +764,7 @@ scif0: serial@e6e60000 {
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 721>;
status = "disabled";
};
......@@ -740,6 +780,7 @@ scif1: serial@e6e68000 {
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 720>;
status = "disabled";
};
......@@ -755,6 +796,7 @@ scif2: serial@e6e58000 {
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 719>;
status = "disabled";
};
......@@ -770,6 +812,7 @@ scif3: serial@e6ea8000 {
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 718>;
status = "disabled";
};
......@@ -785,6 +828,7 @@ scif4: serial@e6ee0000 {
<&dmac1 0xfb>, <&dmac1 0xfc>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 715>;
status = "disabled";
};
......@@ -800,6 +844,7 @@ scif5: serial@e6ee8000 {
<&dmac1 0xfd>, <&dmac1 0xfe>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 714>;
status = "disabled";
};
......@@ -815,6 +860,7 @@ hscif0: serial@e62c0000 {
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 717>;
status = "disabled";
};
......@@ -830,6 +876,7 @@ hscif1: serial@e62c8000 {
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 716>;
status = "disabled";
};
......@@ -845,6 +892,7 @@ hscif2: serial@e62d0000 {
<&dmac1 0x3b>, <&dmac1 0x3c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 713>;
status = "disabled";
};
......@@ -872,6 +920,7 @@ ether: ethernet@ee700000 {
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 813>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 813>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
......@@ -884,6 +933,7 @@ vin0: video@e6ef0000 {
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 811>;
status = "disabled";
};
......@@ -893,6 +943,7 @@ vin1: video@e6ef1000 {
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 810>;
status = "disabled";
};
......@@ -902,6 +953,7 @@ vin2: video@e6ef2000 {
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 809>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 809>;
status = "disabled";
};
......@@ -914,6 +966,7 @@ qspi: spi@e6b10000 {
<&dmac1 0x17>, <&dmac1 0x18>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 917>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
......@@ -958,6 +1011,7 @@ can0: can@e6e80000 {
<&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 916>;
status = "disabled";
};
......@@ -969,6 +1023,7 @@ can1: can@e6e88000 {
<&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 915>;
status = "disabled";
};
......@@ -1147,6 +1202,13 @@ rcar_sound: sound@ec500000 {
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 1005>,
<&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
<&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
<&cpg 1014>, <&cpg 1015>;
reset-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
status = "disabled";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7