Merge branch 'next-s3c24xx' into for-next

arch/arm/mach-s3c2410/include/mach/irqs.h

@@ -152,8 +152,8 @@
 
 #define IRQ_S3C2416_HSMMC0	S3C2410_IRQ(21)		/* S3C2416/S3C2450 */
 
-#define IRQ_HSMMC0		IRQ_S3C2443_HSMMC
-#define IRQ_HSMMC1		IRQ_S3C2416_HSMMC0
+#define IRQ_HSMMC0		IRQ_S3C2416_HSMMC0
+#define IRQ_HSMMC1		IRQ_S3C2443_HSMMC
 
 #define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
 #define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)

arch/arm/mach-s3c2410/include/mach/map.h

@@ -112,8 +112,8 @@
 #define S3C_PA_IIC          S3C2410_PA_IIC
 #define S3C_PA_UART	    S3C24XX_PA_UART
 #define S3C_PA_USBHOST	S3C2410_PA_USBHOST
-#define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
-#define S3C_PA_HSMMC1	    S3C2416_PA_HSMMC0
+#define S3C_PA_HSMMC0	    S3C2416_PA_HSMMC0
+#define S3C_PA_HSMMC1	    S3C2443_PA_HSMMC
 #define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
 #define S3C_PA_NAND	    S3C24XX_PA_NAND
 

arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h

@@ -86,6 +86,7 @@
 #define S3C2443_HCLKCON_LCDC		(1<<9)
 #define S3C2443_HCLKCON_USBH		(1<<11)
 #define S3C2443_HCLKCON_USBD		(1<<12)
+#define S3C2416_HCLKCON_HSMMC0		(1<<15)
 #define S3C2443_HCLKCON_HSMMC		(1<<16)
 #define S3C2443_HCLKCON_CFC		(1<<17)
 #define S3C2443_HCLKCON_SSMC		(1<<18)

arch/arm/mach-s3c2416/Kconfig

@@ -31,6 +31,17 @@ config S3C2416_PM
 	help
 	  Internal config node to apply S3C2416 power management
 
+config S3C2416_SETUP_SDHCI
+	bool
+	select S3C2416_SETUP_SDHCI_GPIO
+	help
+	  Internal helper functions for S3C2416 based SDHCI systems
+
+config S3C2416_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
 menu "S3C2416 Machines"
 
 config MACH_SMDK2416
@@ -42,6 +53,7 @@ config MACH_SMDK2416
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
+	select S3C2416_SETUP_SDHCI
 	select S3C2416_PM if PM
 	help
 	  Say Y here if you are using an SMDK2416

arch/arm/mach-s3c2416/Makefile

@@ -14,6 +14,10 @@ obj-$(CONFIG_CPU_S3C2416)	+= irq.o
 obj-$(CONFIG_S3C2416_PM)	+= pm.o
 #obj-$(CONFIG_S3C2416_DMA)	+= dma.o
 
+# Device setup
+obj-$(CONFIG_S3C2416_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+
 # Machine support
 
 obj-$(CONFIG_MACH_SMDK2416)	+= mach-smdk2416.o

arch/arm/mach-s3c2416/clock.c

@@ -38,12 +38,11 @@ static unsigned int armdiv[8] = {
 	[7] = 8,
 };
 
-/* ID to hardware numbering, 0 is HSMMC1, 1 is HSMMC0 */
 static struct clksrc_clk hsmmc_div[] = {
 	[0] = {
 		.clk = {
 			.name	= "hsmmc-div",
-			.id	= 1,
+			.id	= 0,
 			.parent	= &clk_esysclk.clk,
 		},
 		.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
@@ -51,7 +50,7 @@ static struct clksrc_clk hsmmc_div[] = {
 	[1] = {
 		.clk = {
 			.name	= "hsmmc-div",
-			.id	= 0,
+			.id	= 1,
 			.parent	= &clk_esysclk.clk,
 		},
 		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
@@ -61,7 +60,7 @@ static struct clksrc_clk hsmmc_div[] = {
 static struct clksrc_clk hsmmc_mux[] = {
 	[0] = {
 		.clk	= {
-			.id	= 1,
+			.id	= 0,
 			.name	= "hsmmc-if",
 			.ctrlbit = (1 << 6),
 			.enable = s3c2443_clkcon_enable_s,
@@ -77,7 +76,7 @@ static struct clksrc_clk hsmmc_mux[] = {
 	},
 	[1] = {
 		.clk	= {
-			.id	= 0,
+			.id	= 1,
 			.name	= "hsmmc-if",
 			.ctrlbit = (1 << 12),
 			.enable = s3c2443_clkcon_enable_s,
@@ -93,6 +92,13 @@ static struct clksrc_clk hsmmc_mux[] = {
 	},
 };
 
+static struct clk hsmmc0_clk = {
+	.name		= "hsmmc",
+	.id		= 0,
+	.parent		= &clk_h,
+	.enable		= s3c2443_clkcon_enable_h,
+	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,
+};
 
 static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
 {
@@ -130,6 +136,8 @@ void __init s3c2416_init_clocks(int xtal)
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_register_clksrc(clksrcs[ptr], 1);
 
+	s3c24xx_register_clock(&hsmmc0_clk);
+
 	s3c_pwmclk_init();
 
 }

arch/arm/mach-s3c2416/mach-smdk2416.c

@@ -46,6 +46,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/nand.h>
+#include <plat/sdhci.h>
 
 #include <plat/regs-fb-v4.h>
 #include <plat/fb.h>
@@ -110,6 +111,13 @@ static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
 		.ucon	     = UCON,
 		.ulcon	     = ULCON | 0x50,
 		.ufcon	     = UFCON,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	}
 };
 
@@ -159,6 +167,18 @@ static struct s3c_fb_platdata smdk2416_fb_platdata = {
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 };
 
+static struct s3c_sdhci_platdata smdk2416_hsmmc0_pdata __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S3C2410_GPF(1),
+	.ext_cd_gpio_invert	= 1,
+};
+
+static struct s3c_sdhci_platdata smdk2416_hsmmc1_pdata __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_NONE,
+};
+
 static struct platform_device *smdk2416_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_wdt,
@@ -180,6 +200,9 @@ static void __init smdk2416_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk2416_fb_platdata);
 
+	s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata);
+	s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata);
+
 	gpio_request(S3C2410_GPB(4), "USBHost Power");
 	gpio_direction_output(S3C2410_GPB(4), 1);
 

arch/arm/mach-s3c2416/s3c2416.c

@@ -53,6 +53,7 @@
 #include <plat/s3c2416.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/sdhci.h>
 
 #include <plat/iic-core.h>
 #include <plat/fb-core.h>
@@ -115,6 +116,10 @@ void __init s3c2416_map_io(void)
 	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
 	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
 
+	/* initialize device information early */
+	s3c2416_default_sdhci0();
+	s3c2416_default_sdhci1();
+
 	iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
 }
 

arch/arm/mach-s3c2416/setup-sdhci-gpio.c

+/* linux/arch/arm/plat-s3c2416/setup-sdhci-gpio.c
+ *
+ * Copyright 2010 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * Based on mach-s3c64xx/setup-sdhci-gpio.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	s3c_gpio_cfgrange_nopull(S3C2410_GPE(5), 2 + width, S3C_GPIO_SFN(2));
+}
+
+void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	s3c_gpio_cfgrange_nopull(S3C2410_GPL(0), width, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgrange_nopull(S3C2410_GPL(8), 2, S3C_GPIO_SFN(2));
+}

arch/arm/mach-s3c2416/setup-sdhci.c

+/* linux/arch/arm/mach-s3c2416/setup-sdhci.c
+ *
+ * Copyright 2010 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * S3C2416 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * Based on mach-s3c64xx/setup-sdhci.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c2416_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	[2] = "hsmmc-if",
+	/* [3] = "48m", - note not successfully used yet */
+};
+
+void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
+				  void __iomem *r,
+				  struct mmc_ios *ios,
+				  struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	__raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	__raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}

arch/arm/mach-s3c2443/Kconfig

@@ -10,6 +10,7 @@ config CPU_S3C2443
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC
 	select S3C2443_CLOCK
+	select S3C_GPIO_PULL_S3C2443
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
@@ -25,7 +26,7 @@ config MACH_SMDK2443
 	bool "SMDK2443"
 	select CPU_S3C2443
 	select MACH_SMDK
-	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
 	help
 	  Say Y here if you are using an SMDK2443
 

arch/arm/mach-s3c2443/clock.c

@@ -196,7 +196,7 @@ static struct clksrc_clk clk_hsspi = {
 static struct clksrc_clk clk_hsmmc_div = {
 	.clk	= {
 		.name		= "hsmmc-div",
-		.id		= -1,
+		.id		= 1,
 		.parent		= &clk_esysclk.clk,
 	},
 	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
@@ -231,7 +231,7 @@ static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
 
 static struct clk clk_hsmmc = {
 	.name		= "hsmmc-if",
-	.id		= -1,
+	.id		= 1,
 	.parent		= &clk_hsmmc_div.clk,
 	.enable		= s3c2443_enable_hsmmc,
 	.ops		= &(struct clk_ops) {

arch/arm/mach-s3c2443/mach-smdk2443.c

@@ -99,13 +99,20 @@ static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
 		.ucon	     = 0x3c5,
 		.ulcon	     = 0x43,
 		.ufcon	     = 0x51,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
 	}
 };
 
 static struct platform_device *smdk2443_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
 #ifdef CONFIG_SND_SOC_SMDK2443_WM9710
 	&s3c_device_ac97,
 #endif

arch/arm/mach-s3c2443/s3c2443.c

@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
@@ -32,6 +33,9 @@
 #include <mach/regs-s3c2443-clock.h>
 #include <mach/reset.h>
 
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
 #include <plat/s3c2443.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -86,6 +90,9 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 void __init s3c2443_map_io(void)
 {
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
+
 	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
 }
 

arch/arm/plat-s3c24xx/devs.c

@@ -194,7 +194,6 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_
 	memcpy(&s3c2410ts_info, hard_s3c2410ts_info, sizeof(struct s3c2410_ts_mach_info));
 	s3c_device_ts.dev.platform_data = &s3c2410ts_info;
 }
-EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
 
 /* USB Device (Gadget)*/
 

arch/arm/plat-s3c24xx/s3c2443-clock.c

@@ -271,7 +271,7 @@ static struct clk init_clocks[] = {
 		.ctrlbit	= S3C2443_HCLKCON_DMA5,
 	}, {
 		.name		= "hsmmc",
-		.id		= 0,
+		.id		= 1,
 		.parent		= &clk_h,
 		.enable		= s3c2443_clkcon_enable_h,
 		.ctrlbit	= S3C2443_HCLKCON_HSMMC,

arch/arm/plat-samsung/Kconfig

@@ -95,6 +95,12 @@ config S3C_GPIO_PULL_UPDOWN
 	help
 	  Internal configuration to enable the correct GPIO pull helper
 
+config S3C_GPIO_PULL_S3C2443
+	bool
+	select S3C_GPIO_PULL_UPDOWN
+	help
+	  Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO
+
 config S3C_GPIO_PULL_DOWN
 	bool
 	help

arch/arm/plat-samsung/dev-nand.c

@@ -126,5 +126,3 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
 
 	s3c_device_nand.dev.platform_data = npd;
 }
-
-EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);

arch/arm/plat-samsung/gpio-config.c

@@ -278,6 +278,48 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
 	pup &= 0x3;
 	return (__force s3c_gpio_pull_t)pup;
 }
+
+#ifdef CONFIG_S3C_GPIO_PULL_S3C2443
+int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
+				unsigned int off, s3c_gpio_pull_t pull)
+{
+	switch (pull) {
+	case S3C_GPIO_PULL_NONE:
+		pull = 0x01;
+		break;
+	case S3C_GPIO_PULL_UP:
+		pull = 0x00;
+		break;
+	case S3C_GPIO_PULL_DOWN:
+		pull = 0x02;
+		break;
+	}
+	return s3c_gpio_setpull_updown(chip, off, pull);
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
+					unsigned int off)
+{
+	s3c_gpio_pull_t pull;
+
+	pull = s3c_gpio_getpull_updown(chip, off);
+
+	switch (pull) {
+	case 0x00:
+		pull = S3C_GPIO_PULL_UP;
+		break;
+	case 0x01:
+	case 0x03:
+		pull = S3C_GPIO_PULL_NONE;
+		break;
+	case 0x02:
+		pull = S3C_GPIO_PULL_DOWN;
+		break;
+	}
+
+	return pull;
+}
+#endif
 #endif
 
 #if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)

arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h

@@ -244,7 +244,7 @@ extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
  * This helper function reads the state of the pull-{up,down} resistor for the
  * given GPIO in the same case as s3c_gpio_setpull_upown.
 */
-extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
+extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
 						unsigned int off);
 
 #endif /* __PLAT_GPIO_CFG_HELPERS_H */

arch/arm/plat-samsung/include/plat/sdhci.h

@@ -107,6 +107,8 @@ extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
 
 /* Helper function availablity */
 
+extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
@@ -122,6 +124,39 @@ extern void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 
+/* S3C2416 SDHCI setup */
+
+#ifdef CONFIG_S3C2416_SETUP_SDHCI
+extern char *s3c2416_hsmmc_clksrcs[4];
+
+extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+static inline void s3c2416_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+	s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
+#endif /* CONFIG_S3C_DEV_HSMMC */
+}
+
+static inline void s3c2416_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+}
+
+#else
+static inline void s3c2416_default_sdhci0(void) { }
+static inline void s3c2416_default_sdhci1(void) { }
+
+#endif /* CONFIG_S3C2416_SETUP_SDHCI */
 /* S3C64XX SDHCI setup */
 
 #ifdef CONFIG_S3C64XX_SETUP_SDHCI