drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe

If the watchdog hardware is already enabled during the boot process,
when the Linux watchdog driver loads, it should start/reset the watchdog
and tell the watchdog framework. As a result, ping can be generated from
the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set),
until the userspace watchdog daemon takes over control

Fixes:4332d113 ("watchdog: Add STM32 IWDG driver")
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191122132246.8473-1-christophe.roullier@st.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

drivers/watchdog/stm32_iwdg.c

@@ -262,6 +262,24 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
 	watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT);
 	watchdog_init_timeout(wdd, 0, dev);
 
+	/*
+	 * In case of CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set
+	 * (Means U-Boot/bootloaders leaves the watchdog running)
+	 * When we get here we should make a decision to prevent
+	 * any side effects before user space daemon will take care of it.
+	 * The best option, taking into consideration that there is no
+	 * way to read values back from hardware, is to enforce watchdog
+	 * being run with deterministic values.
+	 */
+	if (IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED)) {
+		ret = stm32_iwdg_start(wdd);
+		if (ret)
+			return ret;
+
+		/* Make sure the watchdog is serviced */
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+	}
+
 	ret = devm_watchdog_register_device(dev, wdd);
 	if (ret)
 		return ret;