Merge http://ppc.bkbits.net/for-linus-ppc64

into home.transmeta.com:/home/torvalds/v2.5/linux

Documentation/filesystems/Locking

@@ -65,7 +65,7 @@ rename:		no	yes (all)	(see below)
 readlink:	no	no
 follow_link:	no	no
 truncate:	no	yes		(see below)
-setattr:	yes	if ATTR_SIZE
+setattr:	no	yes
 permission:	yes	no
 getattr:				(see below)
 revalidate:	no			(see below)

Documentation/filesystems/porting

@@ -116,3 +116,10 @@ FS_LITTER is gone - just remove it from fs_flags.
 	FS_SINGLE is gone (actually, that had happened back when ->get_sb()
 went in - and hadn't been documented ;-/).  Just remove it from fs_flags
 (and see ->get_sb() entry for other actions).
+
+---
+[mandatory]
+
+->setattr() is called without BKL now.  Caller _always_ holds ->i_sem, so
+watch for ->i_sem-grabbing code that might be used by your ->setattr().
+Callers of notify_change() need ->i_sem now.

arch/i386/kernel/acpi.c

@@ -48,6 +48,10 @@
 
 #define PREFIX			"ACPI: "
 
+extern struct acpi_boot_flags	acpi_boot;
+
+int				acpi_mp_config = 0;
+
 
 /* --------------------------------------------------------------------------
                               Boot-time Configuration
@@ -104,13 +108,15 @@ static int total_cpus __initdata = 0;
 
 /* From mpparse.c */
 extern void __init MP_processor_info(struct mpc_config_processor *);
+extern void __init MP_ioapic_info (struct mpc_config_ioapic *);
+extern void __init MP_lintsrc_info(struct mpc_config_lintsrc *);
 
 int __init
 acpi_parse_lapic (
 	acpi_table_entry_header *header)
 {
 	struct acpi_table_lapic	*cpu = NULL;
-	struct mpc_config_processor proc_entry;
+	struct mpc_config_processor processor;
 
 	cpu = (struct acpi_table_lapic*) header;
 	if (!cpu)
@@ -134,21 +140,21 @@ acpi_parse_lapic (
 	 * the processor ID.  Processor features aren't present in
 	 * the table.
 	 */
-	proc_entry.mpc_type = MP_PROCESSOR;
-	proc_entry.mpc_apicid = cpu->id;
-	proc_entry.mpc_cpuflag = CPU_ENABLED;
+	processor.mpc_type = MP_PROCESSOR;
+	processor.mpc_apicid = cpu->id;
+	processor.mpc_cpuflag = CPU_ENABLED;
 	if (cpu->id == boot_cpu_physical_apicid) {
 		/* TBD: Circular reference trying to establish BSP */
-		proc_entry.mpc_cpuflag |= CPU_BOOTPROCESSOR;
+		processor.mpc_cpuflag |= CPU_BOOTPROCESSOR;
 	}
-	proc_entry.mpc_cpufeature = (boot_cpu_data.x86 << 8)
+	processor.mpc_cpufeature = (boot_cpu_data.x86 << 8)
 		| (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
-	proc_entry.mpc_featureflag = boot_cpu_data.x86_capability[0];
-	proc_entry.mpc_reserved[0] = 0;
-	proc_entry.mpc_reserved[1] = 0;
-	proc_entry.mpc_apicver = 0x10;	/* integrated APIC */
+	processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+	processor.mpc_reserved[0] = 0;
+	processor.mpc_reserved[1] = 0;
+	processor.mpc_apicver = 0x10;	/* Integrated APIC */
 
-	MP_processor_info(&proc_entry);
+	MP_processor_info(&processor);
 
 	total_cpus++;
 
@@ -184,7 +190,7 @@ acpi_parse_lapic_nmi (
 
 	acpi_table_print_madt_entry(header);
 
-	/* TBD: Support local APIC NMI entries */
+	/* TBD: Support lapic_nmi entries */
 
 	return 0;
 }
@@ -199,6 +205,10 @@ acpi_parse_ioapic (
 	acpi_table_entry_header *header)
 {
 	struct acpi_table_ioapic *ioapic = NULL;
+	/*
+	struct mpc_config_ioapic mp_ioapic;
+	struct IO_APIC_reg_01	reg_01;
+	*/
 
 	ioapic = (struct acpi_table_ioapic*) header;
 	if (!ioapic)
@@ -206,11 +216,91 @@ acpi_parse_ioapic (
  
 	acpi_table_print_madt_entry(header);
  
-	/* TBD: Support ioapic entries */
+	/*
+	 * Cobble up an entry for the IOAPIC (just as we do for LAPIC entries).
+	 * Note that we aren't doing anything with ioapic->vector, and 
+	 * mpc_apicver gets read directly from ioapic.
+	 */
+
+	/*
+	 * TBD: Complete I/O APIC support.
+	 *
+	mp_ioapic.mpc_type = MP_IOAPIC;
+	mp_ioapic.mpc_apicid = ioapic->id;
+	mp_ioapic.mpc_flags = MPC_APIC_USABLE;
+	mp_ioapic.mpc_apicaddr = ioapic->address;
+	set_fixmap_nocache(nr_ioapics + FIX_IO_APIC_BASE_0,
+		mp_ioapic.mpc_apicaddr);
+
+	printk("mapped IOAPIC to %08lx (%08lx)\n",
+		__fix_to_virt(nr_ioapics), mp_ioapic.mpc_apicaddr);
+
+	*(int *)&reg_01 = io_apic_read(nr_ioapics, 1);
+	mp_ioapic.mpc_apicver = reg_01.version;
+	MP_ioapic_info(&mp_ioapic);
+	 */
 
 	return 0;
 }
 
+
+int __init
+acpi_parse_int_src_ovr (
+	acpi_table_entry_header *header)
+{
+	struct acpi_table_int_src_ovr *int_src_ovr = NULL;
+	/*
+	struct mpc_config_intsrc my_intsrc;
+	int			i = 0;
+	*/
+
+	int_src_ovr = (struct acpi_table_int_src_ovr*) header;
+	if (!int_src_ovr)
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	/*
+	 * TBD: Complete I/O APIC support.
+	 *
+	my_intsrc.mpc_type = MP_INTSRC;
+	my_intsrc.mpc_irqtype = mp_INT;
+	my_intsrc.mpc_irqflag = *(unsigned short*)(&(int_src_ovr->flags));
+	my_intsrc.mpc_srcbus = int_src_ovr->bus;
+	my_intsrc.mpc_srcbusirq = int_src_ovr->bus_irq;
+	my_intsrc.mpc_dstapic = 0;
+	my_intsrc.mpc_dstirq = int_src_ovr->global_irq;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (mp_irqs[i].mpc_srcbusirq == my_intsrc.mpc_srcbusirq) {
+			mp_irqs[i] = my_intsrc;
+			break;
+		}
+	}
+	 */
+
+	return 0;
+}
+
+
+int __init
+acpi_parse_nmi_src (
+	acpi_table_entry_header *header)
+{
+	struct acpi_table_nmi_src *nmi_src = NULL;
+
+	nmi_src = (struct acpi_table_nmi_src*) header;
+	if (!nmi_src)
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	/* TBD: Support nimsrc entries */
+
+	return 0;
+}
+
+
 #endif /*CONFIG_X86_IO_APIC*/
 
 
@@ -288,14 +378,115 @@ acpi_find_rsdp (
 }
 
 
-#endif /*CONFIG_ACPI_BOOT*/
+int __init
+acpi_boot_init (
+	char			*cmdline)
+{
+	int			result = 0;
 
+	/* Initialize the ACPI boot-time table parser */
+	result = acpi_table_init(cmdline);
+	if (0 != result)
+		return result;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+#ifdef CONFIG_X86_IO_APIC
+
+	/* 
+	 * MADT
+	 * ----
+	 * Parse the Multiple APIC Description Table (MADT), if exists.
+	 * Note that this table provides platform SMP configuration 
+	 * information -- the successor to MPS tables.
+	 */
+
+	if (!acpi_boot.madt) {
+		printk(KERN_INFO PREFIX "MADT parsing disabled via command-line\n");
+		return 0;
+	}
+
+	result = acpi_table_parse(ACPI_APIC, acpi_parse_madt);
+	if (0 == result) {
+		printk(KERN_WARNING PREFIX "MADT not present\n");
+		return 0;
+	}
+	else if (0 > result) {
+		printk(KERN_ERR PREFIX "Error parsing MADT\n");
+		return result;
+	}
+	else if (1 < result) 
+		printk(KERN_WARNING PREFIX "Multiple MADT tables exist\n");
+
+	/* Local APIC */
+
+	result = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr);
+	if (0 > result) {
+		printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
+		return result;
+	}
+
+	result = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic);
+	if (1 > result) {
+		printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries!\n");
+		return -ENODEV;
+	}
+
+	result = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi);
+	if (0 > result) {
+		printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
+		return result;
+	}
+
+	/* I/O APIC */
+
+	result = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic);
+	if (1 > result) {
+		printk(KERN_ERR PREFIX "Error parsing MADT - no IOAPIC entries!\n");
+		return -ENODEV;
+	}
+
+	acpi_mp_config = 1;
+
+	/*
+	 * TBD: Complete I/O APIC support.
+	 *
+	construct_default_ACPI_table();
+	 */
+
+	result = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr);
+	if (0 > result) {
+		printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
+		return result;
+	}
+
+	result = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src);
+	if (0 > result) {
+		printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
+		return result;
+	}
+
+	/* Make boot-up look pretty */
+	printk("%d CPUs total\n", total_cpus);
+
+#endif /*CONFIG_X86_IO_APIC*/
+#endif /*CONFIG_X86_LOCAL_APIC*/
+
+#ifdef CONFIG_SERIAL_ACPI
+	/*
+	 * TBD: Need phased approach to table parsing (only do those absolutely
+	 *      required during boot-up).  Recommend expanding concept of fix-
+	 *      feature devices (ACPI Bus driver) to include table-based devices 
+	 *      such as serial ports, EC, SMBus, etc.
+	 */
+	/* acpi_table_parse(ACPI_SPCR, acpi_parse_spcr);*/
+#endif /*CONFIG_SERIAL_ACPI*/
+
+	return 0;
+}
+
+#endif /*CONFIG_ACPI_BOOT*/
 
-/* --------------------------------------------------------------------------
-                            PCI Interrupt Routing Support
-   -------------------------------------------------------------------------- */
 
-#ifdef CONFIG_ACPI_PCI
 int __init
 acpi_get_interrupt_model (
 	int		*type)
@@ -304,15 +495,13 @@ acpi_get_interrupt_model (
 		return -EINVAL;
 
 #ifdef CONFIG_X86_IO_APIC
-	if (io_apic_assign_pci_irqs)
-		*type = ACPI_PCI_ROUTING_IOAPIC;
-	else
+	*type = ACPI_INT_MODEL_IOAPIC;
+#else
+	*type = ACPI_INT_MODEL_PIC;
 #endif
-		*type = ACPI_PCI_ROUTING_PIC;
 
 	return 0;
 }
-#endif
 
 
 /* --------------------------------------------------------------------------

arch/i386/kernel/acpi_wakeup.S

@@ -18,6 +18,8 @@ wakeup_code:
 
 	addw	$(wakeup_data - wakeup_code) >> 4, %ax
 	movw	%ax, %ds
+	movw	%ax, %ss
+	mov	$(wakeup_stack - wakeup_data), %sp		# Private stack is needed for ASUS board
 
 	# set up page table
 	movl	(real_save_cr3 - wakeup_data), %eax

arch/i386/kernel/mpparse.c

@@ -14,7 +14,6 @@
 
 #include <linux/mm.h>
 #include <linux/irq.h>
-#include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/config.h>
@@ -24,6 +23,7 @@
 #include <linux/mc146818rtc.h>
 
 #include <asm/smp.h>
+#include <asm/acpi.h>
 #include <asm/mtrr.h>
 #include <asm/mpspec.h>
 #include <asm/pgalloc.h>
@@ -31,9 +31,6 @@
 /* Have we found an MP table */
 int smp_found_config;
 
-/* Have we found an ACPI MADT table */
-int acpi_found_madt = 0;
-
 /*
  * Various Linux-internal data structures created from the
  * MP-table.
@@ -41,8 +38,6 @@ int acpi_found_madt = 0;
 int apic_version [MAX_APICS];
 int mp_bus_id_to_type [MAX_MP_BUSSES];
 int mp_bus_id_to_node [MAX_MP_BUSSES];
-int mp_bus_id_to_local [MAX_MP_BUSSES];
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
 int mp_current_pci_id;
 
@@ -69,19 +64,6 @@ static unsigned int num_processors;
 /* Bitmask of physically existing CPUs */
 unsigned long phys_cpu_present_map;
 
-/* ACPI MADT entry parsing functions */
-#ifdef CONFIG_ACPI_BOOT
-extern struct acpi_boot_flags acpi_boot;
-#ifdef CONFIG_X86_LOCAL_APIC
-extern int acpi_parse_lapic (acpi_table_entry_header *header);
-extern int acpi_parse_lapic_addr_ovr (acpi_table_entry_header *header);
-extern int acpi_parse_lapic_nmi (acpi_table_entry_header *header);
-#endif /*CONFIG_X86_LOCAL_APIC*/
-#ifdef CONFIG_X86_IO_APIC
-extern int acpi_parse_ioapic (acpi_table_entry_header *header);
-#endif /*CONFIG_X86_IO_APIC*/
-#endif /*CONFIG_ACPI_BOOT*/
-
 /*
  * Intel MP BIOS table parsing routines:
  */
@@ -255,17 +237,13 @@ void __init MP_processor_info (struct mpc_config_processor *m)
 static void __init MP_bus_info (struct mpc_config_bus *m)
 {
 	char str[7];
-	int quad;
 
 	memcpy(str, m->mpc_bustype, 6);
 	str[6] = 0;
 	
 	if (clustered_apic_mode) {
-		quad = translation_table[mpc_record]->trans_quad;
-		mp_bus_id_to_node[m->mpc_busid] = quad;
-		mp_bus_id_to_local[m->mpc_busid] = translation_table[mpc_record]->trans_local;
-		quad_local_to_mp_bus_id[quad][translation_table[mpc_record]->trans_local] = m->mpc_busid;
-		printk("Bus #%d is %s (node %d)\n", m->mpc_busid, str, quad);
+		mp_bus_id_to_node[m->mpc_busid] = translation_table[mpc_record]->trans_quad;
+		printk("Bus #%d is %s (node %d)\n", m->mpc_busid, str, mp_bus_id_to_node[m->mpc_busid]);
 	} else {
 		Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
 	}
@@ -342,14 +320,13 @@ static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
 
 static void __init MP_translation_info (struct mpc_config_translation *m)
 {
-	printk("Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local);
+	printk("Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, 
+		m->trans_quad, m->trans_global, m->trans_local);
 
 	if (mpc_record >= MAX_MPC_ENTRY) 
 		printk("MAX_MPC_ENTRY exceeded!\n");
 	else
 		translation_table[mpc_record] = m; /* stash this for later */
-	if (m->trans_quad+1 > numnodes)
-		numnodes = m->trans_quad+1;
 }
 
 /*
@@ -440,10 +417,10 @@ static int __init smp_read_mpc(struct mp_config_table *mpc)
 	printk("APIC at: 0x%lX\n",mpc->mpc_lapic);
 
 	/* 
-	 * Save the local APIC address, it might be non-default,
-	 * but only if we're not using the ACPI tables
+	 * Save the local APIC address (it might be non-default), but only 
+	 * if we're not using the ACPI tables.
 	 */
-	if (!acpi_found_madt)
+	if (!acpi_mp_config)
 		mp_lapic_addr = mpc->mpc_lapic;
 
 	if (clustered_apic_mode && mpc->mpc_oemptr) {
@@ -464,7 +441,7 @@ static int __init smp_read_mpc(struct mp_config_table *mpc)
 					(struct mpc_config_processor *)mpt;
 
 				/* ACPI may already have provided this one for us */
-				if (!acpi_found_madt)
+				if (!acpi_mp_config)
 					MP_processor_info(m);
 				mpt += sizeof(*m);
 				count += sizeof(*m);
@@ -515,6 +492,10 @@ static int __init smp_read_mpc(struct mp_config_table *mpc)
 		}
 		++mpc_record;
 	}
+	if (clustered_apic_mode && nr_ioapics > 2) {
+		/* don't initialise IO apics on secondary quads */
+		nr_ioapics = 2;
+	}
 	if (!num_processors)
 		printk(KERN_ERR "SMP mptable: no processors registered!\n");
 	return num_processors;
@@ -686,20 +667,6 @@ void __init get_smp_config (void)
 {
 	struct intel_mp_floating *mpf = mpf_found;
 
-#ifdef CONFIG_ACPI_BOOT
-	/*
-	 * Check if the MADT exists, and if so, use it to get processor
-	 * information (ACPI_MADT_LAPIC).  The MADT supports the concept
-	 * of both logical (e.g. HT) and physical processor(s); where the
-	 * MPS only supports physical.
-	 */
-	if (acpi_boot.madt) {
-		acpi_found_madt = acpi_table_parse(ACPI_APIC, acpi_parse_madt);
-		if (acpi_found_madt > 0)
-			acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic);
-	}
-#endif /*CONFIG_ACPI_BOOT*/
-	
 	printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
 	if (mpf->mpf_feature2 & (1<<7)) {
 		printk("    IMCR and PIC compatibility mode.\n");

arch/i386/kernel/pci-irq.c

@@ -540,6 +540,18 @@ static void __init pirq_find_router(void)
 		pirq_router_dev->slot_name);
 }
 
+static struct irq_info *pirq_get_info(struct pci_dev *dev)
+{
+	struct irq_routing_table *rt = pirq_table;
+	int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+	struct irq_info *info;
+
+	for (info = rt->slots; entries--; info++)
+		if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
+			return info;
+	return NULL;
+}
+
 static void pcibios_test_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
 {
 }
@@ -557,44 +569,67 @@ static int acpi_lookup_irq (
 	/* TBD: Select IRQ from possible to improve routing performance. */
 
 	result = acpi_prt_get_irq(dev, pin, &irq);
-	if ((0 != result) || !irq) {
-		printk(KERN_ERR "PCI: Unable to resolve IRQ for device %s\n",
-			dev->slot_name);
+	if (!irq)
+		result = -ENODEV;
+	if (0 != result) {
+		printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s\n",
+		       'A'+pin, dev->slot_name);
 		return result;
 	}
 
+	dev->irq = irq;
+
+	if (!assign) {
+		/* only check for the IRQ */
 		printk(KERN_INFO "PCI: Found IRQ %d for device %s\n", irq, 
 		       dev->slot_name);
+		return 1;
+	}
 
-	dev->irq = irq;
+	/* also assign an IRQ */
+	if (irq && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
+		result = acpi_prt_set_irq(dev, pin, irq);
+		if (0 != result) {
+			printk(KERN_WARNING "PCI: Could not assign IRQ %d to device %s\n", irq, dev->slot_name);
+			return result;
+		}
 
-	pirq_penalty[irq]++;
+		eisa_set_level_irq(irq);
+
+		printk(KERN_INFO "PCI: Assigned IRQ %d for device %s\n", irq, dev->slot_name);
+	}
 
 	return 1;
 }
 
 #endif /* CONFIG_ACPI_PCI */
 
-static struct irq_info *pirq_get_info(struct pci_dev *dev)
+static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 {
-	struct irq_routing_table *rt = pirq_table;
-	int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+	u8 pin;
 	struct irq_info *info;
-
-	for (info = rt->slots; entries--; info++)
-		if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
-			return info;
-	return NULL;
-}
-
-static int pirq_lookup_irq(struct pci_dev *dev, u8 pin, int assign)
-{
+	int i, pirq, newirq;
+	int irq = 0;
+	u32 mask;
 	struct irq_router *r = pirq_router;
-	struct irq_info *info;
-	int  newirq, pirq, i, irq = 0;
 	struct pci_dev *dev2;
 	char *msg = NULL;
-	u32 mask;
+
+	/* Find IRQ pin */
+	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+	if (!pin) {
+		DBG(" -> no interrupt pin\n");
+		return 0;
+	}
+	pin = pin - 1;
+
+#ifdef CONFIG_ACPI_PCI
+	/* Use ACPI to lookup IRQ */
+	if (pci_use_acpi_routing)
+		return acpi_lookup_irq(dev, pin, assign);
+#endif
+
+	/* Find IRQ routing entry */
 
 	if (!pirq_table)
 		return 0;
@@ -605,7 +640,6 @@ static int pirq_lookup_irq(struct pci_dev *dev, u8 pin, int assign)
 		DBG(" -> not found in routing table\n");
 		return 0;
 	}
-
 	pirq = info->irq[pin].link;
 	mask = info->irq[pin].bitmap;
 	if (!pirq) {
@@ -629,10 +663,6 @@ static int pirq_lookup_irq(struct pci_dev *dev, u8 pin, int assign)
 	 * reported by the device if possible.
 	 */
 	newirq = dev->irq;
-	if (!((1 << newirq) & mask)) {
-		if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
-		else printk(KERN_WARNING "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n", newirq, dev->slot_name);
-	}
 	if (!newirq && assign) {
 		for (i = 0; i < 16; i++) {
 			if (!(mask & (1 << i)))
@@ -651,8 +681,7 @@ static int pirq_lookup_irq(struct pci_dev *dev, u8 pin, int assign)
 		irq = pirq & 0xf;
 		DBG(" -> hardcoded IRQ %d\n", irq);
 		msg = "Hardcoded";
-	} else if ( r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
-	((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask)) ) {
+	} else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq))) {
 		DBG(" -> got IRQ %d\n", irq);
 		msg = "Found";
 	} else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
@@ -686,9 +715,7 @@ static int pirq_lookup_irq(struct pci_dev *dev, u8 pin, int assign)
 			continue;
 		if (info->irq[pin].link == pirq) {
 			/* We refuse to override the dev->irq information. Give a warning! */
-		    	if ( dev2->irq && dev2->irq != irq && \
-			(!(pci_probe & PCI_USE_PIRQ_MASK) || \
-			((1 << dev2->irq) & mask)) ) {
+		    	if (dev2->irq && dev2->irq != irq) {
 		    		printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
 				       dev2->slot_name, dev2->irq, irq);
 		    		continue;
@@ -702,38 +729,20 @@ static int pirq_lookup_irq(struct pci_dev *dev, u8 pin, int assign)
 	return 1;
 }
 
-static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
-{
-	u8 pin;
-
-	/* Find IRQ routing entry */
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-	if (!pin) {
-		DBG("PCI: %s: no interrupt pin\n", dev->slot_name);
-		return 0;
-	}
-	pin -= 1;
-
-#ifdef CONFIG_ACPI_PCI
-	if (pci_use_acpi_routing)
-		return acpi_lookup_irq(dev, pin, assign);
-	else
-#endif
-		return pirq_lookup_irq(dev, pin, assign);
-}
-
 void __init pcibios_irq_init(void)
 {
 	DBG("PCI: IRQ init\n");
 
 #ifdef CONFIG_ACPI_PCI
-	if (acpi_prts.count && !(pci_probe & PCI_NO_ACPI_ROUTING)) {
+	if (!(pci_probe & PCI_NO_ACPI_ROUTING)) {
+		if (acpi_prts.count) {
 			printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
 			pci_use_acpi_routing = 1;
 			return;
 		}
-	if (!acpi_prts.count)
-		printk(KERN_INFO "PCI: Invalid acpi_prts [%d]\n", acpi_prts.count);
+		else
+			printk(KERN_WARNING "PCI: Invalid ACPI-PCI IRQ routing table\n");
+	}
 #endif
 
 	pirq_table = pirq_find_routing_table();

arch/ppc/Config.help

@@ -1033,6 +1033,16 @@ CONFIG_XMON
   Include in-kernel hooks for the xmon kernel monitor/debugger
   supported by the PPC port.
 
+Include BDI2000 debugger support
+CONFIG_BDI_SWITCH
+  Include in-kernel support for the Abatron BDI2000 debugger.
+
+Add additional CFLAGS to the kernel build
+CONFIG_MORE_COMPILE_OPTIONS
+  If you want to add additional CFLAGS to the kernel build, such as
+  -g for KGDB, XMON or the BDI2000, enable this option and then
+  enter what you would like to add in the next question.
+
 CONFIG_ADVANCED_OPTIONS
   This option will enable prompting for a variety of advanced kernel
   configuration options.  These options can cause the kernel to not

arch/ppc/config.in

@@ -125,15 +125,12 @@ if [ "$CONFIG_6xx" = "y" -a "$CONFIG_8260" = "n" ]; then
 	 Zynx-ZX4500		CONFIG_ZX4500"		CHRP/PowerMac/PReP
 fi
 
-if [ "$CONFIG_PCORE" = "y" \
-  -o "$CONFIG_POWERPMC250" = "y" ]; then
+if [ "$CONFIG_PCORE" = "y" -o "$CONFIG_POWERPMC250" = "y" ]; then
    define_bool CONFIG_FORCE y
 fi
 
-if [ "$CONFIG_FORCE" = "y" \
-  -o "$CONFIG_MENF1" = "y" \
-  -o "$CONFIG_SANDPOINT" = "y" \
-  -o "$CONFIG_ZX4500" = "y" ]; then
+if [ "$CONFIG_FORCE" = "y" -o "$CONFIG_MENF1" = "y" \
+     -o "$CONFIG_SANDPOINT" = "y" -o "$CONFIG_ZX4500" = "y" ]; then
    bool 'Enable MPC10x store gathering' CONFIG_MPC10X_STORE_GATHERING
 fi
 
@@ -287,7 +284,7 @@ if [ "$CONFIG_ADVANCED_OPTIONS" = "y" ]; then
    if [ "$CONFIG_4xx" = "y" ]; then
       bool "Pinned Kernel TLBs" CONFIG_PIN_TLB
    fi
-  if [ "$CONFIG_ALL_PPC" = "n" ]; then
+   if [ "$CONFIG_ALL_PPC" != "y" ]; then
       bool "Set the boot link/load address" CONFIG_BOOT_LOAD_BOOL
       if [ "$CONFIG_BOOT_LOAD_BOOL" = "y" ]; then
          hex "  Link/load address for booting" CONFIG_BOOT_LOAD 0x00400000
@@ -421,7 +418,6 @@ mainmenu_option next_comment
 comment 'ATA/IDE/MFM/RLL support'
 
 tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
-
 if [ "$CONFIG_IDE" != "n" ]; then
    source drivers/ide/Config.in
 else
@@ -472,7 +468,6 @@ endmenu
 
 mainmenu_option next_comment
 comment 'Old CD-ROM drivers (not SCSI, not IDE)'
-
 bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
 if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
    source drivers/cdrom/Config.in
@@ -484,7 +479,7 @@ comment 'Console drivers'
 if [ "$CONFIG_4xx" != "y" -a "$CONFIG_8xx" != "y" ]; then
    bool 'Support for VGA Console' CONFIG_VGA_CONSOLE
 fi
- source drivers/video/Config.in
+source drivers/video/Config.in
 if [ "$CONFIG_FB" = "y" -a "$CONFIG_ALL_PPC" = "y" ]; then
    bool 'Backward compatibility mode for Xpmac' CONFIG_FB_COMPAT_XPMAC
 fi
@@ -509,12 +504,11 @@ if [ "$CONFIG_PPC_ISERIES" = "y" ]; then
 	-o "$CONFIG_VIOTAPE" != "n" -o "$CONFIG_VIOCD" != "n" ]; then
       define_bool CONFIG_VIOPATH y
    fi
-   endmenu
-fi
-
-if [ "$CONFIG_VIOCD" = "y" ]; then
+   if [ "$CONFIG_VIOCD" = "y" ]; then
       define_bool CONFIG_CD_NO_IDESCSI y
       define_bool CONFIG_BLK_DEV_IDECD y
+   fi
+   endmenu
 fi
 
 source drivers/input/Config.in
@@ -576,15 +570,14 @@ if [ "$CONFIG_SOUND" != "n" ]; then
    source sound/oss/dmasound/Config.in
    source sound/Config.in
 fi
-
 endmenu
 
 if [ "$CONFIG_8xx" = "y" ]; then
-source arch/ppc/8xx_io/Config.in
+   source arch/ppc/8xx_io/Config.in
 fi
 
 if [ "$CONFIG_8260" = "y" ]; then
-source arch/ppc/8260_io/Config.in
+   source arch/ppc/8260_io/Config.in
 fi
 
 if [ "$CONFIG_4xx" = "y"]; then

arch/ppc/kernel/idle.c

@@ -52,15 +52,13 @@ void power_save(void);
 unsigned long zero_paged_on;
 unsigned long powersave_nap;
 
-int idled(void)
+void default_idle(void)
 {
 	int do_power_save = 0;
 
 	if (cur_cpu_spec[smp_processor_id()]->cpu_features & CPU_FTR_CAN_DOZE)
 		do_power_save = 1;
 
-	/* endless loop with no priority at all */
-	for (;;) {
 #ifdef CONFIG_PPC_ISERIES
 	if (!current->need_resched) {
 		/* Turn off the run light */
@@ -93,8 +91,6 @@ int idled(void)
 		HMT_low();
 	}
 #endif /* CONFIG_PPC_ISERIES */
-	}
-	return 0;
 }
 
 /*
@@ -103,7 +99,8 @@ int idled(void)
  */
 int cpu_idle(void)
 {
-	idled();
+	for (;;)
+		default_idle();
 	return 0; 
 }
 

arch/ppc/kernel/ppc_ksyms.c

@@ -79,6 +79,10 @@ extern unsigned char __res[];
 extern unsigned long ret_to_user_hook;
 extern unsigned long mm_ptov (unsigned long paddr);
 
+extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
+extern void consistent_free(void *vaddr);
+extern void consistent_sync(void *vaddr, size_t size, int direction);
+
 EXPORT_SYMBOL(clear_page);
 EXPORT_SYMBOL(do_signal);
 EXPORT_SYMBOL(do_syscall_trace);

arch/ppc/kernel/semaphore.c

@@ -20,6 +20,7 @@
 #include <linux/sched.h>
 #include <asm/atomic.h>
 #include <asm/semaphore.h>
+#include <asm/errno.h>
 
 /*
  * Atomically update sem->count.

arch/ppc/kernel/signal.c

@@ -594,8 +594,8 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 				info.si_signo = signr;
 				info.si_errno = 0;
 				info.si_code = SI_USER;
-				info.si_pid = current->p_pptr->pid;
-				info.si_uid = current->p_pptr->uid;
+				info.si_pid = current->parent->pid;
+				info.si_uid = current->parent->uid;
 			}
 
 			/* If the (new) signal is now blocked, requeue it.  */
@@ -634,7 +634,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 			case SIGSTOP:
 				current->state = TASK_STOPPED;
 				current->exit_code = signr;
-				if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
+				if (!(current->parent->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
 					notify_parent(current, SIGCHLD);
 				schedule();
 				continue;

arch/ppc/mm/mmu_decl.h

@@ -22,6 +22,7 @@
  *  2 of the License, or (at your option) any later version.
  *
  */
+#include <asm/tlbflush.h>
 
 extern void mapin_ram(void);
 extern void bat_mapin_ram(void);

arch/ppc/mm/pgtable.c

@@ -28,6 +28,7 @@
 #include <linux/types.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
+#include <linux/highmem.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -56,6 +57,70 @@ void setbat(int index, unsigned long virt, unsigned long phys,
 #define p_mapped_by_bats(x)	(0UL)
 #endif /* HAVE_BATS */
 
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *ret;
+
+	if ((ret = (pgd_t *)__get_free_page(GFP_KERNEL)) != NULL)
+		clear_page(ret);
+	return ret;
+}
+
+void pgd_free(pgd_t *pgd)
+{
+	free_page((unsigned long)pgd);
+}
+
+pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+	pte_t *pte;
+	extern int mem_init_done;
+	extern void *early_get_page(void);
+	int timeout = 0;
+
+	if (mem_init_done) {
+		while ((pte = (pte_t *) __get_free_page(GFP_KERNEL)) == NULL
+		       && ++timeout < 10) {
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule_timeout(HZ);
+		}
+	} else
+		pte = (pte_t *) early_get_page();
+	if (pte != NULL)
+		clear_page(pte);
+	return pte;
+}
+
+struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	struct page *pte;
+	int timeout = 0;
+#ifdef CONFIG_HIGHPTE
+	int flags = GFP_KERNEL | __GFP_HIGHMEM;
+#else
+	int flags = GFP_KERNEL;
+#endif
+
+	while ((pte = alloc_pages(flags, 0)) == NULL) {
+		if (++timeout >= 10)
+			return NULL;
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(HZ);
+	}
+	clear_highpage(pte);
+	return pte;
+}
+
+void pte_free_kernel(pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+void pte_free(struct page *pte)
+{
+	__free_page(pte);
+}
+
 #ifndef CONFIG_PPC_ISERIES
 void *
 ioremap(unsigned long addr, unsigned long size)

drivers/acpi/Makefile

@@ -9,7 +9,7 @@ export ACPI_CFLAGS
 ACPI_CFLAGS	:= -D_LINUX -I$(CURDIR)/include
 
 ifdef CONFIG_ACPI_DEBUG
-  ACPI_CFLAGS	+= -DACPI_DEBUG -Wno-unused
+  ACPI_CFLAGS	+= -DACPI_DEBUG
 endif
 
 EXTRA_CFLAGS	+= $(ACPI_CFLAGS)

drivers/acpi/acpi_ac.c

 /*
- *  acpi_ac.c - ACPI AC Adapter Driver ($Revision: 22 $)
+ *  acpi_ac.c - ACPI AC Adapter Driver ($Revision: 23 $)
  *
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -296,6 +296,7 @@ acpi_ac_remove (
 	struct acpi_ac		*ac = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_ac_remove");
+
 	if (!device || !acpi_driver_data(device))
 		return_VALUE(-EINVAL);
 

drivers/acpi/acpi_battery.c

 /*
- *  acpi_battery.c - ACPI Battery Driver ($Revision: 31 $)
+ *  acpi_battery.c - ACPI Battery Driver ($Revision: 32 $)
  *
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -112,8 +112,9 @@ acpi_battery_get_info (
 	struct acpi_battery	*battery,
 	struct acpi_battery_info **bif)
 {
+	int			result = 0;
 	acpi_status 		status = 0;
-	acpi_buffer 		buffer = {0, NULL};
+	acpi_buffer 		buffer = {ACPI_ALLOCATE_BUFFER, NULL};
 	acpi_buffer		format = {sizeof(ACPI_BATTERY_FORMAT_BIF),
 						ACPI_BATTERY_FORMAT_BIF};
 	acpi_buffer		data = {0, NULL};
@@ -126,9 +127,11 @@ acpi_battery_get_info (
 
 	/* Evalute _BIF */
 
-	status = acpi_evaluate(battery->handle, "_BIF", NULL, &buffer);
-	if (ACPI_FAILURE(status))
+	status = acpi_evaluate_object(battery->handle, "_BIF", NULL, &buffer);
+	if (ACPI_FAILURE(status)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _BIF\n"));
 		return_VALUE(-ENODEV);
+	}
 
 	package = (acpi_object *) buffer.pointer;
 
@@ -136,29 +139,33 @@ acpi_battery_get_info (
 
 	status = acpi_extract_package(package, &format, &data);
 	if (status != AE_BUFFER_OVERFLOW) {
-		kfree(buffer.pointer);
-		return_VALUE(-ENODEV);
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BIF\n"));
+		result = -ENODEV;
+		goto end;
 	}
 
 	data.pointer = kmalloc(data.length, GFP_KERNEL);
 	if (!data.pointer) {
-		kfree(buffer.pointer);
-		return_VALUE(-ENOMEM);
+		result = -ENOMEM;
+		goto end;
 	}
 	memset(data.pointer, 0, data.length);
 
 	status = acpi_extract_package(package, &format, &data);
 	if (ACPI_FAILURE(status)) {
-		kfree(buffer.pointer);
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BIF\n"));
 		kfree(data.pointer);
-		return_VALUE(-ENODEV);
+		result = -ENODEV;
+		goto end;
 	}
 
+end:
 	kfree(buffer.pointer);
 
-	(*bif) = data.pointer;
+	if (0 == result)
+		(*bif) = (struct acpi_battery_info *) data.pointer;
 
-	return_VALUE(0);
+	return_VALUE(result);
 }
 
 static int
@@ -166,8 +173,9 @@ acpi_battery_get_status (
 	struct acpi_battery	*battery,
 	struct acpi_battery_status **bst)
 {
+	int			result = 0;
 	acpi_status 		status = 0;
-	acpi_buffer 		buffer = {0, NULL};
+	acpi_buffer 		buffer = {ACPI_ALLOCATE_BUFFER, NULL};
 	acpi_buffer		format = {sizeof(ACPI_BATTERY_FORMAT_BST),
 						ACPI_BATTERY_FORMAT_BST};
 	acpi_buffer		data = {0, NULL};
@@ -180,9 +188,11 @@ acpi_battery_get_status (
 
 	/* Evalute _BST */
 
-	status = acpi_evaluate(battery->handle, "_BST", NULL, &buffer);
-	if (ACPI_FAILURE(status))
+	status = acpi_evaluate_object(battery->handle, "_BST", NULL, &buffer);
+	if (ACPI_FAILURE(status)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _BST\n"));
 		return_VALUE(-ENODEV);
+	}
 
 	package = (acpi_object *) buffer.pointer;
 
@@ -190,29 +200,33 @@ acpi_battery_get_status (
 
 	status = acpi_extract_package(package, &format, &data);
 	if (status != AE_BUFFER_OVERFLOW) {
-		kfree(buffer.pointer);
-		return_VALUE(-ENODEV);
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BST\n"));
+		result = -ENODEV;
+		goto end;
 	}
 
 	data.pointer = kmalloc(data.length, GFP_KERNEL);
 	if (!data.pointer) {
-		kfree(buffer.pointer);
-		return_VALUE(-ENOMEM);
+		result = -ENOMEM;
+		goto end;
 	}
 	memset(data.pointer, 0, data.length);
 
 	status = acpi_extract_package(package, &format, &data);
 	if (ACPI_FAILURE(status)) {
-		kfree(buffer.pointer);
+		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error extracting _BST\n"));
 		kfree(data.pointer);
-		return_VALUE(-ENODEV);
+		result = -ENODEV;
+		goto end;
 	}
 
+end:
 	kfree(buffer.pointer);
 
-	(*bst) = data.pointer;
+	if (0 == result)
+		(*bst) = (struct acpi_battery_status *) data.pointer;
 
-	return_VALUE(0);
+	return_VALUE(result);
 }
 
 
@@ -328,7 +342,7 @@ acpi_battery_read_info (
 {
 	int			result = 0;
 	struct acpi_battery	*battery = (struct acpi_battery *) data;
-	struct acpi_battery_info *bif = 0;
+	struct acpi_battery_info *bif = NULL;
 	char			*units = "?";
 	char			*p = page;
 	int			len = 0;
@@ -403,7 +417,6 @@ acpi_battery_read_info (
 		bif->oem_info);
 
 end:
-	if (bif)
 	kfree(bif);
 
 	len = (p - page);
@@ -490,7 +503,6 @@ acpi_battery_read_state (
 			(u32) bst->present_voltage);
 
 end:
-	if (bst)
 	kfree(bst);
 
 	len = (p - page);

drivers/acpi/acpi_bus.h

 /*
- *  acpi_bus.h - ACPI Bus Driver ($Revision: 17 $)
+ *  acpi_bus.h - ACPI Bus Driver ($Revision: 19 $)
  *
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -96,8 +96,9 @@ typedef int (*acpi_op_stop)	(struct acpi_device *device, int type);
 typedef int (*acpi_op_suspend)	(struct acpi_device *device, int state);
 typedef int (*acpi_op_resume)	(struct acpi_device *device, int state);
 typedef int (*acpi_op_scan)	(struct acpi_device *device);
+typedef int (*acpi_op_bind)	(struct acpi_device *device);
 
-struct acpi_driver_ops {
+struct acpi_device_ops {
 	acpi_op_add		add;
 	acpi_op_remove		remove;
 	acpi_op_lock		lock;
@@ -106,6 +107,7 @@ struct acpi_driver_ops {
 	acpi_op_suspend		suspend;
 	acpi_op_resume		resume;
 	acpi_op_scan		scan;
+	acpi_op_bind		bind;
 };
 
 struct acpi_driver {
@@ -114,7 +116,7 @@ struct acpi_driver {
 	char			class[80];
 	int			references;
 	char			*ids;		/* Supported Hardware IDs */
-	struct acpi_driver_ops	ops;
+	struct acpi_device_ops	ops;
 };
 
 enum acpi_blacklist_predicates
@@ -157,14 +159,18 @@ struct acpi_device_status {
 /* Flags */
 
 struct acpi_device_flags {
-	u8			dynamic_status:1;
-	u8			compatible_ids:1;
-	u8			removable:1;
-	u8			ejectable:1;
-	u8			lockable:1;
-	u8			suprise_removal_ok:1;
-	u8			power_manageable:1;
-	u8			performance_manageable:1;
+	u32			dynamic_status:1;
+	u32			hardware_id:1;
+	u32			compatible_ids:1;
+	u32			bus_address:1;
+	u32			unique_id:1;
+	u32			removable:1;
+	u32			ejectable:1;
+	u32			lockable:1;
+	u32			suprise_removal_ok:1;
+	u32			power_manageable:1;
+	u32			performance_manageable:1;
+	u32			reserved:21;
 };
 
 
@@ -206,13 +212,13 @@ struct acpi_device_pnp {
 /* Power Management */
 
 struct acpi_device_power_flags {
-	u8			explicit_get:1;		     /* _PSC present? */
-	u8			power_resources:1;	   /* Power resources */
-	u8			inrush_current:1;	  /* Serialize Dx->D0 */
-	u8			wake_capable:1;		 /* Wakeup supported? */
-	u8			wake_enabled:1;		/* Enabled for wakeup */
-	u8			power_removed:1;	   /* Optimize Dx->D0 */
-	u8			reserved:2;
+	u32			explicit_get:1;		     /* _PSC present? */
+	u32			power_resources:1;	   /* Power resources */
+	u32			inrush_current:1;	  /* Serialize Dx->D0 */
+	u32			wake_capable:1;		 /* Wakeup supported? */
+	u32			wake_enabled:1;		/* Enabled for wakeup */
+	u32			power_removed:1;	   /* Optimize Dx->D0 */
+	u32			reserved:26;
 };
 
 struct acpi_device_power_state {
@@ -270,6 +276,7 @@ struct acpi_device {
 	struct acpi_device_power power;
 	struct acpi_device_perf	performance;
 	struct acpi_device_dir	dir;
+	struct acpi_device_ops	ops;
 	struct acpi_driver	*driver;
 	void			*driver_data;
 #ifdef CONFIG_LDM

drivers/acpi/acpi_button.c

 /*
- *  acpi_button.c - ACPI Button Driver ($Revision: 22 $)
+ *  acpi_button.c - ACPI Button Driver ($Revision: 24 $)
  *
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -69,7 +69,7 @@ struct acpi_button {
 #include <linux/compatmac.h>
 #include <linux/proc_fs.h>
 
-struct proc_dir_entry		*acpi_button_dir = NULL;
+static struct proc_dir_entry	*acpi_button_dir = NULL;
 
 
 static int
@@ -81,7 +81,6 @@ acpi_button_read_info (
 	int 			*eof,
 	void			*data)
 {
-	int			result = 0;
 	struct acpi_button	*button = (struct acpi_button *) data;
 	char			*p = page;
 	int			len = 0;
@@ -111,21 +110,41 @@ acpi_button_add_fs (
 	struct acpi_device	*device)
 {
 	struct proc_dir_entry	*entry = NULL;
+	struct acpi_button	*button = NULL;
 
 	ACPI_FUNCTION_TRACE("acpi_button_add_fs");
 
+	if (!device || !acpi_driver_data(device))
+		return_VALUE(-EINVAL);
+
+	button = acpi_driver_data(device);
+
 	if (!acpi_button_dir) {
 		acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
 		if (!acpi_button_dir)
 			return_VALUE(-ENODEV);
 	}
 
-	if (!acpi_device_dir(device)) {
-		acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device),
+	switch (button->type) {
+	case ACPI_BUTTON_TYPE_POWER:
+	case ACPI_BUTTON_TYPE_POWERF:
+		entry = proc_mkdir(ACPI_BUTTON_SUBCLASS_POWER, 
 			acpi_button_dir);
+		break;
+	case ACPI_BUTTON_TYPE_SLEEP:
+	case ACPI_BUTTON_TYPE_SLEEPF:
+		entry = proc_mkdir(ACPI_BUTTON_SUBCLASS_SLEEP, 
+			acpi_button_dir);
+		break;
+	case ACPI_BUTTON_TYPE_LID:
+		entry = proc_mkdir(ACPI_BUTTON_SUBCLASS_LID, 
+			acpi_button_dir);
+		break;
+	}
+
+	acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), entry);
 	if (!acpi_device_dir(device))
 		return_VALUE(-ENODEV);
-	}
 
 	/* 'info' [R] */
 	entry = create_proc_entry(ACPI_BUTTON_FILE_INFO,
@@ -227,37 +246,46 @@ acpi_button_add (
 
 	button->device = device;
 	button->handle = device->handle;
-	sprintf(acpi_device_class(device), "%s", ACPI_BUTTON_CLASS);
 	acpi_driver_data(device) = button;
 
 	/*
 	 * Determine the button type (via hid), as fixed-feature buttons
 	 * need to be handled a bit differently than generic-space.
 	 */
-	if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF)) {
-		button->type = ACPI_BUTTON_TYPE_POWERF;
-		sprintf(acpi_device_name(device), "%s",
-			ACPI_BUTTON_DEVICE_NAME_POWERF);
-	}
-	else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF)) {
-		button->type = ACPI_BUTTON_TYPE_SLEEPF;
-		sprintf(acpi_device_name(device), "%s",
-			ACPI_BUTTON_DEVICE_NAME_SLEEPF);
-	}
-	else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWER)) {
+	if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWER)) {
 		button->type = ACPI_BUTTON_TYPE_POWER;
 		sprintf(acpi_device_name(device), "%s",
 			ACPI_BUTTON_DEVICE_NAME_POWER);
+		sprintf(acpi_device_class(device), "%s/%s", 
+			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
+	}
+	else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF)) {
+		button->type = ACPI_BUTTON_TYPE_POWERF;
+		sprintf(acpi_device_name(device), "%s",
+			ACPI_BUTTON_DEVICE_NAME_POWERF);
+		sprintf(acpi_device_class(device), "%s/%s", 
+			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
 	}
 	else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEP)) {
 		button->type = ACPI_BUTTON_TYPE_SLEEP;
 		sprintf(acpi_device_name(device), "%s",
 			ACPI_BUTTON_DEVICE_NAME_SLEEP);
+		sprintf(acpi_device_class(device), "%s/%s", 
+			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
+	}
+	else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF)) {
+		button->type = ACPI_BUTTON_TYPE_SLEEPF;
+		sprintf(acpi_device_name(device), "%s",
+			ACPI_BUTTON_DEVICE_NAME_SLEEPF);
+		sprintf(acpi_device_class(device), "%s/%s", 
+			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
 	}
 	else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_LID)) {
 		button->type = ACPI_BUTTON_TYPE_LID;
 		sprintf(acpi_device_name(device), "%s",
 			ACPI_BUTTON_DEVICE_NAME_LID);
+		sprintf(acpi_device_class(device), "%s/%s", 
+			ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
 	}
 	else {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unsupported hid [%s]\n",

drivers/acpi/acpi_drivers.h

 /*
- *  acpi_drivers.h  ($Revision: 17 $)
+ *  acpi_drivers.h  ($Revision: 23 $)
  *
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -30,7 +30,7 @@
 #include "acpi_bus.h"
 
 
-#define ACPI_DRIVER_VERSION		0x20020308
+#define ACPI_DRIVER_VERSION		0x20020404
 #define ACPI_MAX_STRING			80
 
 
@@ -84,26 +84,32 @@
    -------------------------------------------------------------------------- */
 
 #define ACPI_BUTTON_COMPONENT		0x00080000
-#define ACPI_BUTTON_CLASS		"button"
-#define ACPI_BUTTON_HID_LID		"PNP0C0D"
-#define ACPI_BUTTON_HID_POWER		"PNP0C0C"	
-#define ACPI_BUTTON_HID_POWERF		"ACPI_FPB"
-#define ACPI_BUTTON_HID_SLEEP		"PNP0C0E"
-#define ACPI_BUTTON_HID_SLEEPF		"ACPI_FSB"
 #define ACPI_BUTTON_DRIVER_NAME		"ACPI Button Driver"
-#define ACPI_BUTTON_DEVICE_NAME_POWER	"Power Button"
-#define ACPI_BUTTON_DEVICE_NAME_POWERF	"Power Button"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEP	"Sleep Button"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEPF	"Sleep Button"
-#define ACPI_BUTTON_DEVICE_NAME_LID	"Lid Switch"
+#define ACPI_BUTTON_CLASS		"button"
 #define ACPI_BUTTON_FILE_INFO		"info"
 #define ACPI_BUTTON_TYPE_UNKNOWN	0x00
+#define ACPI_BUTTON_NOTIFY_STATUS	0x80
+
+#define ACPI_BUTTON_SUBCLASS_POWER	"power"
+#define ACPI_BUTTON_HID_POWER		"PNP0C0C"	
+#define ACPI_BUTTON_HID_POWERF		"ACPI_FPB"
+#define ACPI_BUTTON_DEVICE_NAME_POWER	"Power Button (CM)"
+#define ACPI_BUTTON_DEVICE_NAME_POWERF	"Power Button (FF)"
 #define ACPI_BUTTON_TYPE_POWER		0x01
 #define ACPI_BUTTON_TYPE_POWERF		0x02
+
+#define ACPI_BUTTON_SUBCLASS_SLEEP	"sleep"
+#define ACPI_BUTTON_HID_SLEEP		"PNP0C0E"
+#define ACPI_BUTTON_HID_SLEEPF		"ACPI_FSB"
+#define ACPI_BUTTON_DEVICE_NAME_SLEEP	"Sleep Button (CM)"
+#define ACPI_BUTTON_DEVICE_NAME_SLEEPF	"Sleep Button (FF)"
 #define ACPI_BUTTON_TYPE_SLEEP		0x03
 #define ACPI_BUTTON_TYPE_SLEEPF		0x04
+
+#define ACPI_BUTTON_SUBCLASS_LID	"lid"
+#define ACPI_BUTTON_HID_LID		"PNP0C0D"
+#define ACPI_BUTTON_DEVICE_NAME_LID	"Lid Switch"
 #define ACPI_BUTTON_TYPE_LID		0x05
-#define ACPI_BUTTON_NOTIFY_STATUS	0x80
 
 
 /* --------------------------------------------------------------------------
@@ -217,7 +223,7 @@ void acpi_power_exit (void);
 #define ACPI_PROCESSOR_LIMIT_INCREMENT	0x01
 #define ACPI_PROCESSOR_LIMIT_DECREMENT	0x02
 
-int acpi_processor_set_limit(acpi_handle handle, int flags, int *state);
+int acpi_processor_set_thermal_limit(acpi_handle handle, int type);
 
 
 /* --------------------------------------------------------------------------

drivers/acpi/acpi_ec.c

 /*
- *  acpi_ec.c - ACPI Embedded Controller Driver ($Revision: 27 $)
+ *  acpi_ec.c - ACPI Embedded Controller Driver ($Revision: 28 $)
  *
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -345,7 +345,7 @@ acpi_ec_gpe_handler (
 	if (0 != acpi_ec_query(ec, &value))
 		return;
 
-	query_data = kmalloc(sizeof(struct acpi_ec_query_data), GFP_KERNEL);
+	query_data = kmalloc(sizeof(struct acpi_ec_query_data), GFP_ATOMIC);
 	if (!query_data)
 		return;
 	query_data->handle = ec->handle;

drivers/acpi/acpi_osl.c

 /*
- *  acpi_osl.c - OS-dependent functions ($Revision: 65 $)
+ *  acpi_osl.c - OS-dependent functions ($Revision: 69 $)
  *
  *  Copyright (C) 2000 Andrew Henroid
  *  Copyright (C) 2001 Andrew Grover
@@ -125,13 +125,13 @@ acpi_os_vprintf(const NATIVE_CHAR *fmt, va_list args)
 }
 
 void *
-acpi_os_allocate(u32 size)
+acpi_os_allocate(ACPI_SIZE size)
 {
 	return kmalloc(size, GFP_KERNEL);
 }
 
 void *
-acpi_os_callocate(u32 size)
+acpi_os_callocate(ACPI_SIZE size)
 {
 	void *ptr = acpi_os_allocate(size);
 	if (ptr)
@@ -148,21 +148,22 @@ acpi_os_free(void *ptr)
 
 
 acpi_status
-acpi_os_get_root_pointer(u32 flags, ACPI_PHYSICAL_ADDRESS *phys_addr)
+acpi_os_get_root_pointer(u32 flags, ACPI_POINTER *addr)
 {
 #ifndef CONFIG_ACPI_EFI
-	if (ACPI_FAILURE(acpi_find_root_pointer(flags, phys_addr))) {
+	if (ACPI_FAILURE(acpi_find_root_pointer(flags, addr))) {
 		printk(KERN_ERR PREFIX "System description tables not found\n");
 		return AE_NOT_FOUND;
 	}
 #else /*CONFIG_ACPI_EFI*/
+	addr->pointer_type = ACPI_PHYSICAL_POINTER;
 	if (efi.acpi20)
-		*phys_addr = (ACPI_PHYSICAL_ADDRESS) efi.acpi20;
+		addr->pointer.physical = (ACPI_PHYSICAL_ADDRESS) efi.acpi20;
 	else if (efi.acpi)
-		*phys_addr = (ACPI_PHYSICAL_ADDRESS) efi.acpi;
+		addr->pointer.physical = (ACPI_PHYSICAL_ADDRESS) efi.acpi;
 	else {
 		printk(KERN_ERR PREFIX "System description tables not found\n");
-		*phys_addr = 0;
+		addr->pointer.physical = 0;
 		return AE_NOT_FOUND;
 	}
 #endif /*CONFIG_ACPI_EFI*/
@@ -171,7 +172,7 @@ acpi_os_get_root_pointer(u32 flags, ACPI_PHYSICAL_ADDRESS *phys_addr)
 }
 
 acpi_status
-acpi_os_map_memory(ACPI_PHYSICAL_ADDRESS phys, u32 size, void **virt)
+acpi_os_map_memory(ACPI_PHYSICAL_ADDRESS phys, ACPI_SIZE size, void **virt)
 {
 	if (phys > ULONG_MAX) {
 		printk(KERN_ERR PREFIX "Cannot map memory that high\n");
@@ -189,7 +190,7 @@ acpi_os_map_memory(ACPI_PHYSICAL_ADDRESS phys, u32 size, void **virt)
 }
 
 void
-acpi_os_unmap_memory(void *virt, u32 size)
+acpi_os_unmap_memory(void *virt, ACPI_SIZE size)
 {
 	iounmap(virt);
 }
@@ -441,14 +442,14 @@ acpi_os_load_module (
 	ACPI_FUNCTION_TRACE ("os_load_module");
 
 	if (!module_name)
-		return AE_BAD_PARAMETER;
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
 
 	if (0 > request_module(module_name)) {
 		ACPI_DEBUG_PRINT ((ACPI_DB_WARN, "Unable to load module [%s].\n", module_name));
-		return AE_ERROR;
+		return_ACPI_STATUS (AE_ERROR);
 	}
 
-	return AE_OK;
+	return_ACPI_STATUS (AE_OK);
 }
 
 acpi_status
@@ -481,7 +482,7 @@ acpi_os_queue_exec (
 	strcpy(current->comm, "kacpidpc");
 
 	if (!dpc || !dpc->function)
-		return AE_BAD_PARAMETER;
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
 
 	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Executing function [%p(%p)].\n", dpc->function, dpc->context));
 
@@ -489,7 +490,7 @@ acpi_os_queue_exec (
 
 	kfree(dpc);
 
-	return 1;
+	return_ACPI_STATUS (AE_OK);
 }
 
 static void
@@ -504,7 +505,7 @@ acpi_os_schedule_exec (
 	dpc = (ACPI_OS_DPC*)context;
 	if (!dpc) {
 		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Invalid (NULL) context.\n"));
-		return;
+		return_VOID;
 	}
 
 	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Creating new thread to run function [%p(%p)].\n", dpc->function, dpc->context));
@@ -515,6 +516,7 @@ acpi_os_schedule_exec (
 		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Call to kernel_thread() failed.\n"));
 		acpi_os_free(dpc);
 	}
+    return_VOID;
 }
 
 acpi_status
@@ -531,7 +533,7 @@ acpi_os_queue_for_execution(
 	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Scheduling function [%p(%p)] for deferred execution.\n", function, context));
 
 	if (!function)
-		return AE_BAD_PARAMETER;
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
 
 	/*
 	 * Queue via DPC:
@@ -554,7 +556,7 @@ acpi_os_queue_for_execution(
 		 */
 		dpc = kmalloc(sizeof(ACPI_OS_DPC), GFP_ATOMIC);
 		if (!dpc)
-			return AE_NO_MEMORY;
+			return_ACPI_STATUS (AE_NO_MEMORY);
 
 		dpc->function = function;
 		dpc->context = context;
@@ -578,7 +580,7 @@ acpi_os_queue_for_execution(
 		 */
 		dpc = kmalloc(sizeof(ACPI_OS_DPC), GFP_KERNEL);
 		if (!dpc)
-			return AE_NO_MEMORY;
+			return_ACPI_STATUS (AE_NO_MEMORY);
 
 		dpc->function = function;
 		dpc->context = context;
@@ -587,7 +589,7 @@ acpi_os_queue_for_execution(
 		break;
 	}
 
-	return status;
+	return_ACPI_STATUS (status);
 }
 
 
@@ -603,7 +605,7 @@ acpi_os_create_semaphore(
 
 	sem = acpi_os_callocate(sizeof(struct semaphore));
 	if (!sem)
-		return AE_NO_MEMORY;
+		return_ACPI_STATUS (AE_NO_MEMORY);
 
 	sema_init(sem, initial_units);
 
@@ -611,7 +613,7 @@ acpi_os_create_semaphore(
 
 	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Creating semaphore[%p|%d].\n", *handle, initial_units));
 
-	return AE_OK;
+	return_ACPI_STATUS (AE_OK);
 }
 
 
@@ -631,13 +633,13 @@ acpi_os_delete_semaphore(
 	ACPI_FUNCTION_TRACE ("os_delete_semaphore");
 
 	if (!sem)
-		return AE_BAD_PARAMETER;
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
 
 	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Deleting semaphore[%p].\n", handle));
 
 	acpi_os_free(sem); sem =  NULL;
 
-	return AE_OK;
+	return_ACPI_STATUS (AE_OK);
 }
 
 
@@ -663,10 +665,10 @@ acpi_os_wait_semaphore(
 	ACPI_FUNCTION_TRACE ("os_wait_semaphore");
 
 	if (!sem || (units < 1))
-		return AE_BAD_PARAMETER;
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
 
 	if (units > 1)
-		return AE_SUPPORT;
+		return_ACPI_STATUS (AE_SUPPORT);
 
 	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Waiting for semaphore[%p|%d|%d]\n", handle, units, timeout));
 
@@ -724,7 +726,7 @@ acpi_os_wait_semaphore(
 		ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Acquired semaphore[%p|%d|%d]\n", handle, units, timeout));
 	}
 
-	return status;
+	return_ACPI_STATUS (status);
 }
 
 
@@ -741,16 +743,16 @@ acpi_os_signal_semaphore(
 	ACPI_FUNCTION_TRACE ("os_signal_semaphore");
 
 	if (!sem || (units < 1))
-		return AE_BAD_PARAMETER;
+		return_ACPI_STATUS (AE_BAD_PARAMETER);
 
 	if (units > 1)
-		return AE_SUPPORT;
+		return_ACPI_STATUS (AE_SUPPORT);
 
 	ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Signaling semaphore[%p|%d]\n", handle, units));
 
 	up(sem);
 
-	return AE_OK;
+	return_ACPI_STATUS (AE_OK);
 }
 
 u32

drivers/acpi/debugger/dbdisply.c

 /*******************************************************************************
  *
  * Module Name: dbdisply - debug display commands
- *              $Revision: 66 $
+ *              $Revision: 67 $
  *
  ******************************************************************************/
 
@@ -298,6 +298,7 @@ acpi_db_decode_internal_object (
 
 
 	if (!obj_desc) {
+		acpi_os_printf (" Uninitialized\n");
 		return;
 	}
 
@@ -420,10 +421,10 @@ acpi_db_display_internal_object (
 				break;
 
 			case AML_LOCAL_OP:
-				acpi_os_printf ("[Local%d]", obj_desc->reference.offset);
+				acpi_os_printf ("[Local%d] ", obj_desc->reference.offset);
 				if (walk_state) {
 					obj_desc = walk_state->local_variables[obj_desc->reference.offset].object;
-					acpi_os_printf (" %p", obj_desc);
+					acpi_os_printf ("%p", obj_desc);
 					acpi_db_decode_internal_object (obj_desc);
 				}
 				break;
@@ -432,7 +433,7 @@ acpi_db_display_internal_object (
 				acpi_os_printf ("[Arg%d] ", obj_desc->reference.offset);
 				if (walk_state) {
 					obj_desc = walk_state->arguments[obj_desc->reference.offset].object;
-					acpi_os_printf (" %p", obj_desc);
+					acpi_os_printf ("%p", obj_desc);
 					acpi_db_decode_internal_object (obj_desc);
 				}
 				break;
@@ -467,7 +468,6 @@ acpi_db_display_internal_object (
 		break;
 	}
 
-
 	acpi_os_printf ("\n");
 }