Commit 890255e7 authored by Robert Jarzmik's avatar Robert Jarzmik Committed by Mark Brown

ASoC: mioa701: convert to snd_soc_register_card API

The mioa701 board code is converted to the snd_soc_register_card()
and snd_soc_unregister_card() APIs.
Signed-off-by: default avatarRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent c9fe573a
...@@ -186,36 +186,27 @@ static struct snd_soc_card mioa701 = { ...@@ -186,36 +186,27 @@ static struct snd_soc_card mioa701 = {
.num_links = ARRAY_SIZE(mioa701_dai), .num_links = ARRAY_SIZE(mioa701_dai),
}; };
static struct platform_device *mioa701_snd_device; static int __devinit mioa701_wm9713_probe(struct platform_device *pdev)
static int mioa701_wm9713_probe(struct platform_device *pdev)
{ {
int ret; int rc;
if (!machine_is_mioa701()) if (!machine_is_mioa701())
return -ENODEV; return -ENODEV;
mioa701.dev = &pdev->dev;
rc = snd_soc_register_card(&mioa701);
if (!rc)
dev_warn(&pdev->dev, "Be warned that incorrect mixers/muxes setup will" dev_warn(&pdev->dev, "Be warned that incorrect mixers/muxes setup will"
"lead to overheating and possible destruction of your device." "lead to overheating and possible destruction of your device."
"Do not use without a good knowledge of mio's board design!\n"); " Do not use without a good knowledge of mio's board design!\n");
return rc;
mioa701_snd_device = platform_device_alloc("soc-audio", -1);
if (!mioa701_snd_device)
return -ENOMEM;
platform_set_drvdata(mioa701_snd_device, &mioa701);
ret = platform_device_add(mioa701_snd_device);
if (!ret)
return 0;
platform_device_put(mioa701_snd_device);
return ret;
} }
static int __devexit mioa701_wm9713_remove(struct platform_device *pdev) static int __devexit mioa701_wm9713_remove(struct platform_device *pdev)
{ {
platform_device_unregister(mioa701_snd_device); struct snd_soc_card *card = platform_get_drvdata(pdev);
snd_soc_unregister_card(card);
return 0; return 0;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment