Skip to content

L
linux
Commit 895c8b7b authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM SoC fixes from Arnd Bergmann:
 "The arm-soc bug fixes this time around are mostly for the omap
  platform, coming from a pull request from Tony Lindgren and are almost
  entirely fixing dts files.

  The other two changes enable support for the shmobile platform in
  generic armv7 kernels and change some properties in the ARM64
  reference board dts files"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: multi_v7_defconfig: Enable shmobile platforms
  arm64: Add L2 cache topology to ARM Ltd boards/models
  ARM: dts: am335x-bone*: usb0 is hardwired for peripheral
  ARM: dts: dra7x-evm: beagle-x15: Fix USB Host
  ARM: omap2plus_defconfig: Fix SATA boot
  ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
  ARM: dts: dra7: Correct the dma controller's property names
  ARM: dts: omap5: Correct the dma controller's property names
  ARM: dts: omap4: Correct the dma controller's property names
  ARM: dts: omap3: Correct the dma controller's property names
  ARM: dts: omap2: Correct the dma controller's property names
  ARM: dts: am437x-idk: fix sleep pinctrl state
  ARM: omap2plus_defconfig: enable TPS62362 regulator
  ARM: dts: am437x-idk: fix TPS62362 i2c bus
  ARM: dts: n900: Fix offset for smc91x ethernet
  ARM: dts: n900: fix i2c bus numbering
  ARM: dts: Fix USB dts configuration for dm816x
  ARM: dts: OMAP5: Fix SATA PHY node
  ARM: dts: DRA7: Fix SATA PHY node
parents 8d20a3dd 4a3a6f86
Show whitespace changes
Inline Side-by-side
Showing with 190 additions and 72 deletions
arch/arm/boot/dts/am335x-bone-common.dtsi
View file @ 895c8b7b
......@@ -195,6 +195,7 @@ &usb1_phy {
&usb0 {
status = "okay";
dr_mode = "peripheral";
};
&usb1 {
......
arch/arm/boot/dts/am437x-idk-evm.dts
View file @ 895c8b7b
......@@ -133,20 +133,6 @@ i2c0_pins_sleep: i2c0_pins_sleep {
>;
};
i2c1_pins_default: i2c1_pins_default {
pinctrl-single,pins = <
0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
>;
};
i2c1_pins_sleep: i2c1_pins_sleep {
pinctrl-single,pins = <
0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */
0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */
>;
};
mmc1_pins_default: pinmux_mmc1_pins_default {
pinctrl-single,pins = <
0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
......@@ -254,7 +240,7 @@ &i2c0 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c0_pins_default>;
pinctrl-1 = <&i2c0_pins_default>;
pinctrl-1 = <&i2c0_pins_sleep>;
clock-frequency = <400000>;
at24@50 {
......@@ -262,17 +248,10 @@ at24@50 {
pagesize = <64>;
reg = <0x50>;
};
};
&i2c1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_pins_default>;
pinctrl-1 = <&i2c1_pins_default>;
clock-frequency = <400000>;
tps: tps62362@60 {
compatible = "ti,tps62362";
reg = <0x60>;
regulator-name = "VDD_MPU";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1330000>;
......
arch/arm/boot/dts/am57xx-beagle-x15.dts
View file @ 895c8b7b
......@@ -549,14 +549,6 @@ &usb1 {
pinctrl-0 = <&usb1_pins>;
};
&omap_dwc3_1 {
extcon = <&extcon_usb1>;
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&usb2 {
dr_mode = "peripheral";
};
arch/arm/boot/dts/dm8168-evm.dts
View file @ 895c8b7b
......@@ -35,6 +35,18 @@ DM816X_IOPAD(0x0aa8, PIN_INPUT | MUX_MODE0) /* SPI_D0 */
DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */
>;
};
usb0_pins: pinmux_usb0_pins {
pinctrl-single,pins = <
DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */
>;
};
usb1_pins: pinmux_usb0_pins {
pinctrl-single,pins = <
DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */
>;
};
};
&i2c1 {
......@@ -127,3 +139,16 @@ m25p80@0 {
&mmc1 {
vmmc-supply = <&vmmcsd_fixed>;
};
/* At least dm8168-evm rev c won't support multipoint, later may */
&usb0 {
pinctrl-names = "default";
pinctrl-0 = <&usb0_pins>;
mentor,multipoint = <0>;
};
&usb1 {
pinctrl-names = "default";
pinctrl-0 = <&usb1_pins>;
mentor,multipoint = <0>;
};
arch/arm/boot/dts/dm816x.dtsi
View file @ 895c8b7b
......@@ -97,10 +97,31 @@ dm816x_pinmux: pinmux@800 {
/* Device Configuration Registers */
scm_conf: syscon@600 {
compatible = "syscon";
compatible = "syscon", "simple-bus";
reg = <0x600 0x110>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x600 0x110>;
usb_phy0: usb-phy@20 {
compatible = "ti,dm8168-usb-phy";
reg = <0x20 0x8>;
reg-names = "phy";
clocks = <&main_fapll 6>;
clock-names = "refclk";
#phy-cells = <0>;
syscon = <&scm_conf>;
};
usb_phy1: usb-phy@28 {
compatible = "ti,dm8168-usb-phy";
reg = <0x28 0x8>;
reg-names = "phy";
clocks = <&main_fapll 6>;
clock-names = "refclk";
#phy-cells = <0>;
syscon = <&scm_conf>;
};
};
scrm_clocks: clocks {
......@@ -357,7 +378,10 @@ usb0: usb@47401000 {
reg-names = "mc", "control";
interrupts = <18>;
interrupt-names = "mc";
dr_mode = "otg";
dr_mode = "host";
interface-type = <0>;
phys = <&usb_phy0>;
phy-names = "usb2-phy";
mentor,multipoint = <1>;
mentor,num-eps = <16>;
mentor,ram-bits = <12>;
......@@ -366,13 +390,15 @@ usb0: usb@47401000 {
usb1: usb@47401800 {
compatible = "ti,musb-am33xx";
status = "disabled";
reg = <0x47401c00 0x400
0x47401800 0x200>;
reg-names = "mc", "control";
interrupts = <19>;
interrupt-names = "mc";
dr_mode = "otg";
dr_mode = "host";
interface-type = <0>;
phys = <&usb_phy1>;
phy-names = "usb2-phy";
mentor,multipoint = <1>;
mentor,num-eps = <16>;
mentor,ram-bits = <12>;
......
arch/arm/boot/dts/dra7-evm.dts
View file @ 895c8b7b
......@@ -543,14 +543,6 @@ partition@9 {
};
};
&omap_dwc3_1 {
extcon = <&extcon_usb1>;
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&usb1 {
dr_mode = "peripheral";
pinctrl-names = "default";
......
arch/arm/boot/dts/dra7.dtsi
View file @ 895c8b7b
......@@ -249,8 +249,8 @@ sdma: dma-controller@4a056000 {
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <127>;
dma-channels = <32>;
dma-requests = <127>;
};
gpio1: gpio@4ae10000 {
......@@ -1090,8 +1090,8 @@ sata_phy: phy@4A096000 {
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_sata>;
clocks = <&sys_clkin1>;
clock-names = "sysclk";
clocks = <&sys_clkin1>, <&sata_ref_clk>;
clock-names = "sysclk", "refclk";
#phy-cells = <0>;
};
......
arch/arm/boot/dts/dra72-evm.dts
View file @ 895c8b7b
......@@ -380,14 +380,6 @@ &usb2_phy2 {
phy-supply = <&ldo4_reg>;
};
&omap_dwc3_1 {
extcon = <&extcon_usb1>;
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&usb1 {
dr_mode = "peripheral";
pinctrl-names = "default";
......
arch/arm/boot/dts/omap2.dtsi
View file @ 895c8b7b
......@@ -87,8 +87,8 @@ sdma: dma-controller@48056000 {
<14>,
<15>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <64>;
dma-channels = <32>;
dma-requests = <64>;
};
i2c1: i2c@48070000 {
......
arch/arm/boot/dts/omap3-n900.dts
View file @ 895c8b7b
......@@ -16,6 +16,13 @@ / {
model = "Nokia N900";
compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
aliases {
i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
};
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
......@@ -704,7 +711,7 @@ ethernet@gpmc {
compatible = "smsc,lan91c94";
interrupt-parent = <&gpio2>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */
reg = <1 0 0xf>; /* 16 byte IO range */
bank-width = <2>;
pinctrl-names = "default";
pinctrl-0 = <&ethernet_pins>;
......
arch/arm/boot/dts/omap3.dtsi
View file @ 895c8b7b
......@@ -155,8 +155,8 @@ sdma: dma-controller@48056000 {
<14>,
<15>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <96>;
dma-channels = <32>;
dma-requests = <96>;
};
omap3_pmx_core: pinmux@48002030 {
......
arch/arm/boot/dts/omap4.dtsi
View file @ 895c8b7b
......@@ -223,8 +223,8 @@ sdma: dma-controller@4a056000 {
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <127>;
dma-channels = <32>;
dma-requests = <127>;
};
gpio1: gpio@4a310000 {
......
arch/arm/boot/dts/omap5.dtsi
View file @ 895c8b7b
......@@ -238,8 +238,8 @@ sdma: dma-controller@4a056000 {
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <127>;
dma-channels = <32>;
dma-requests = <127>;
};
gpio1: gpio@4ae10000 {
......@@ -929,8 +929,8 @@ sata_phy: phy@4a096000 {
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_sata>;
clocks = <&sys_clkin>;
clock-names = "sysclk";
clocks = <&sys_clkin>, <&sata_ref_clk>;
clock-names = "sysclk", "refclk";
#phy-cells = <0>;
};
};
......
arch/arm/configs/multi_v7_defconfig
View file @ 895c8b7b
......@@ -62,6 +62,17 @@ CONFIG_MACH_SPEAR1340=y
CONFIG_ARCH_STI=y
CONFIG_ARCH_EXYNOS=y
CONFIG_EXYNOS5420_MCPM=y
CONFIG_ARCH_SHMOBILE_MULTI=y
CONFIG_ARCH_EMEV2=y
CONFIG_ARCH_R7S72100=y
CONFIG_ARCH_R8A73A4=y
CONFIG_ARCH_R8A7740=y
CONFIG_ARCH_R8A7779=y
CONFIG_ARCH_R8A7790=y
CONFIG_ARCH_R8A7791=y
CONFIG_ARCH_R8A7794=y
CONFIG_ARCH_SH73A0=y
CONFIG_MACH_MARZEN=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_SIRF=y
CONFIG_ARCH_TEGRA=y
......@@ -84,6 +95,8 @@ CONFIG_PCI_KEYSTONE=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MVEBU=y
CONFIG_PCI_TEGRA=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCI_RCAR_GEN2_PCIE=y
CONFIG_PCIEPORTBUS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
......@@ -130,6 +143,7 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_OMAP_OCP2SCP=y
CONFIG_SIMPLE_PM_BUS=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
......@@ -157,6 +171,7 @@ CONFIG_AHCI_SUNXI=y
CONFIG_AHCI_TEGRA=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
CONFIG_SATA_RCAR=y
CONFIG_NETDEVICES=y
CONFIG_HIX5HD2_GMAC=y
CONFIG_SUN4I_EMAC=y
......@@ -167,14 +182,17 @@ CONFIG_MV643XX_ETH=y
CONFIG_MVNETA=y
CONFIG_KS8851=y
CONFIG_R8169=y
CONFIG_SH_ETH=y
CONFIG_SMSC911X=y
CONFIG_STMMAC_ETH=y
CONFIG_TI_CPSW=y
CONFIG_XILINX_EMACLITE=y
CONFIG_AT803X_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
......@@ -192,15 +210,18 @@ CONFIG_KEYBOARD_CROS_EC=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_TOUCHSCREEN_ST1232=m
CONFIG_TOUCHSCREEN_STMPE=y
CONFIG_TOUCHSCREEN_SUN4I=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_AXP20X_PEK=y
CONFIG_INPUT_ADXL34X=m
CONFIG_SERIO_AMBAKMI=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_EM=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
......@@ -213,6 +234,9 @@ CONFIG_SERIAL_SIRFSOC_CONSOLE=y
CONFIG_SERIAL_TEGRA=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=20
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_SERIAL_VT8500=y
......@@ -233,19 +257,26 @@ CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
CONFIG_I2C_CADENCE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_GPIO=m
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_RIIC=y
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIRF=y
CONFIG_I2C_TEGRA=y
CONFIG_I2C_ST=y
CONFIG_SPI=y
CONFIG_I2C_TEGRA=y
CONFIG_I2C_XILINX=y
CONFIG_SPI_DAVINCI=y
CONFIG_I2C_RCAR=y
CONFIG_SPI=y
CONFIG_SPI_CADENCE=y
CONFIG_SPI_DAVINCI=y
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
CONFIG_SPI_RSPI=y
CONFIG_SPI_SH_MSIOF=m
CONFIG_SPI_SH_HSPI=y
CONFIG_SPI_SIRF=y
CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
......@@ -259,12 +290,15 @@ CONFIG_PINCTRL_PALMAS=y
CONFIG_PINCTRL_APQ8084=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_DAVINCI=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_EM=y
CONFIG_GPIO_RCAR=y
CONFIG_GPIO_XILINX=y
CONFIG_GPIO_ZYNQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=y
CONFIG_GPIO_TWL4030=y
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_SYSCON=y
......@@ -276,10 +310,12 @@ CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_KEYSTONE=y
CONFIG_POWER_RESET_SUN6I=y
CONFIG_POWER_RESET_RMOBILE=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM95245=y
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_DAVINCI_WATCHDOG
CONFIG_ST_THERMAL_SYSCFG=y
......@@ -290,6 +326,7 @@ CONFIG_ARM_SP805_WATCHDOG=y
CONFIG_ORION_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MESON_WATCHDOG=y
CONFIG_MFD_AS3711=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_AXP20X=y
......@@ -304,13 +341,16 @@ CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR_AB8500=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_GPIO=y
CONFIG_MFD_SYSCON=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_S2MPS11=y
......@@ -324,18 +364,32 @@ CONFIG_REGULATOR_TWL4030=y
CONFIG_REGULATOR_VEXPRESS=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_GSPCA=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_VIDEO_RCAR_VIN=m
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_RENESAS_VSP1=m
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_ADV7180=m
CONFIG_DRM=y
CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_TEGRA=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_FB_ARMCLCD=y
CONFIG_FB_WM8505=y
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_SIMPLE=y
CONFIG_FB_SH_MOBILE_MERAM=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_SOUND=y
......@@ -343,6 +397,8 @@ CONFIG_SND=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_SH4_FSI=m
CONFIG_SND_SOC_RCAR=m
CONFIG_SND_SOC_TEGRA=y
CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_SND_SOC_TEGRA_WM8753=y
......@@ -350,6 +406,8 @@ CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
CONFIG_SND_SOC_TEGRA_ALC5632=y
CONFIG_SND_SOC_TEGRA_MAX98090=y
CONFIG_SND_SOC_AK4642=m
CONFIG_SND_SOC_WM8978=m
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
......@@ -362,6 +420,8 @@ CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_STI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_R8A66597_HCD=m
CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
CONFIG_USB_CHIPIDEA=y
......@@ -374,6 +434,10 @@ CONFIG_SAMSUNG_USB3PHY=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
CONFIG_USB_MXS_PHY=y
CONFIG_USB_RCAR_PHY=m
CONFIG_USB_RCAR_GEN2_PHY=m
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_MMC=y
CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_ARMMMCI=y
......@@ -392,12 +456,14 @@ CONFIG_MMC_SDHCI_ST=y
CONFIG_MMC_OMAP=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MMC_MVSDIO=y
CONFIG_MMC_SUNXI=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_MMC_SUNXI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
......@@ -421,10 +487,12 @@ CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_RTC_DRV_TPS65910=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_EM3027=y
CONFIG_RTC_DRV_PL031=y
CONFIG_RTC_DRV_VT8500=y
......@@ -436,6 +504,9 @@ CONFIG_DMADEVICES=y
CONFIG_DW_DMAC=y
CONFIG_MV_XOR=y
CONFIG_TEGRA20_APB_DMA=y
CONFIG_SH_DMAE=y
CONFIG_RCAR_AUDMAC_PP=m
CONFIG_RCAR_DMAC=y
CONFIG_STE_DMA40=y
CONFIG_SIRF_DMA=y
CONFIG_TI_EDMA=y
......@@ -468,6 +539,7 @@ CONFIG_IIO=y
CONFIG_XILINX_XADC=y
CONFIG_AK8975=y
CONFIG_PWM=y
CONFIG_PWM_RENESAS_TPU=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_VT8500=y
CONFIG_PHY_HIX5HD2_SATA=y
......
arch/arm/configs/omap2plus_defconfig
View file @ 895c8b7b
......@@ -114,6 +114,7 @@ CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_OMAP_BCH=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OMAP2=y
......@@ -248,6 +249,7 @@ CONFIG_TWL6040_CORE=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_TI_ABB=y
CONFIG_REGULATOR_TPS62360=m
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
......@@ -374,7 +376,7 @@ CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
CONFIG_OMAP_USB2=m
CONFIG_TI_PIPE3=m
CONFIG_TI_PIPE3=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
......
arch/arm64/boot/dts/arm/foundation-v8.dts
View file @ 895c8b7b
......@@ -34,6 +34,7 @@ cpu@0 {
reg = <0x0 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
cpu@1 {
device_type = "cpu";
......@@ -41,6 +42,7 @@ cpu@1 {
reg = <0x0 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
cpu@2 {
device_type = "cpu";
......@@ -48,6 +50,7 @@ cpu@2 {
reg = <0x0 0x2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
cpu@3 {
device_type = "cpu";
......@@ -55,6 +58,11 @@ cpu@3 {
reg = <0x0 0x3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
L2_0: l2-cache0 {
compatible = "cache";
};
};
......
arch/arm64/boot/dts/arm/juno.dts
View file @ 895c8b7b
......@@ -39,6 +39,7 @@ A57_0: cpu@0 {
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
};
A57_1: cpu@1 {
......@@ -46,6 +47,7 @@ A57_1: cpu@1 {
reg = <0x0 0x1>;
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
};
A53_0: cpu@100 {
......@@ -53,6 +55,7 @@ A53_0: cpu@100 {
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
};
A53_1: cpu@101 {
......@@ -60,6 +63,7 @@ A53_1: cpu@101 {
reg = <0x0 0x101>;
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
};
A53_2: cpu@102 {
......@@ -67,6 +71,7 @@ A53_2: cpu@102 {
reg = <0x0 0x102>;
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
};
A53_3: cpu@103 {
......@@ -74,6 +79,15 @@ A53_3: cpu@103 {
reg = <0x0 0x103>;
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
};
A57_L2: l2-cache0 {
compatible = "cache";
};
A53_L2: l2-cache1 {
compatible = "cache";
};
};
......
arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
View file @ 895c8b7b
......@@ -37,6 +37,7 @@ cpu@0 {
reg = <0x0 0x0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
cpu@1 {
device_type = "cpu";
......@@ -44,6 +45,7 @@ cpu@1 {
reg = <0x0 0x1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
cpu@2 {
device_type = "cpu";
......@@ -51,6 +53,7 @@ cpu@2 {
reg = <0x0 0x2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
cpu@3 {
device_type = "cpu";
......@@ -58,6 +61,11 @@ cpu@3 {
reg = <0x0 0x3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x8000fff8>;
next-level-cache = <&L2_0>;
};
L2_0: l2-cache0 {
compatible = "cache";
};
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7