Skip to content

L
linux
Commit 8a20a04b authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull more ARM DT changes from Arnd Bergmann:
 "Here are some final updates for ARM SoC specific dts files:

   - The i.MX changes were sent relatively late, and had a dependency on
     the clk tree, so I delayed that a bit.  Support for the new i.MX6qp
     SoC and a couple of new boards is added in this branch.

   - Uniphier renames a few files to match the final product names that
     were decided by the company, kudos to the kernel developer(s) for
     getting support upstream before the product release.  Also two
     boards are added.  The patches were posted early enough and nice
     overall, but we forgot to apply them and decided to give it some
     more time in linux-next

   - at91 has two small bug fixes"

* tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
  ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
  ARM: dts: uniphier: add pinmux node for I2C ch4
  ARM: dts: uniphier: add @{address} to EEPROM node
  ARM: dts: uniphier: add PH1-Pro4 Sanji board support
  ARM: dts: uniphier: add PH1-Pro4 Ace board support
  ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board
  ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board
  ARM: dts: uniphier: add reference clock nodes
  ARM: dts: uniphier: rework UniPhier System Bus nodes
  ARM: dts: uniphier: factor out ranges property of support card
  arm64: dts: uniphier: rename PH1-LD10 to PH1-LD20
  ARM: dts: imx53-qsb: Fix gpio button polarity
  ARM: dts: vfxxx: Add DAC node for Vybrid SoC
  ARM: dts: imx6q: add missing links between ipu2 and mipi dsi
  ARM: dts: imx: Add support for Advantech/GE B850v3
  ARM: dts: imx: Add support for Advantech/GE B650v3
  ARM: dts: imx: Add support for Advantech/GE B450v3
  ARM: dts: imx: Add support for Advantech/GE Bx50v3
  ARM: dts: imx: Add Advantech BA-16 Qseven module
  ...
parents 732b84ee 6fe35ab7
Show whitespace changes
Inline Side-by-side
Showing with 6088 additions and 1339 deletions
Documentation/devicetree/bindings/vendor-prefixes.txt
View file @ 8a20a04b
......@@ -10,6 +10,7 @@ ad Avionic Design GmbH
adapteva Adapteva, Inc.
adh AD Holdings Plc.
adi Analog Devices, Inc.
advantech Advantech Corporation
aeroflexgaisler Aeroflex Gaisler AB
al Annapurna Labs
allwinner Allwinner Technology Co., Ltd.
......@@ -89,6 +90,7 @@ fcs Fairchild Semiconductor
firefly Firefly
focaltech FocalTech Systems Co.,Ltd
fsl Freescale Semiconductor
ge General Electric Company
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
geniatech Geniatech, Inc.
......
arch/arm/boot/dts/Makefile
View file @ 8a20a04b
......@@ -325,12 +325,17 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-udoo.dtb \
imx6dl-wandboard.dtb \
imx6dl-wandboard-revb1.dtb \
imx6q-apalis-ixora.dtb \
imx6q-apf6dev.dtb \
imx6q-arm2.dtb \
imx6q-b450v3.dtb \
imx6q-b650v3.dtb \
imx6q-b850v3.dtb \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-dfi-fs700-m60.dtb \
imx6q-dmo-edmqmx6.dtb \
imx6q-evi.dtb \
imx6q-gk802.dtb \
imx6q-gw51xx.dtb \
imx6q-gw52xx.dtb \
......@@ -340,6 +345,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-gw551x.dtb \
imx6q-gw552x.dtb \
imx6q-hummingboard.dtb \
imx6q-icore-rqs.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
imx6q-novena.dtb \
......@@ -357,7 +363,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-tx6q-1110.dtb \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb
imx6q-wandboard-revb1.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-warp.dtb
......@@ -752,7 +760,9 @@ dtb-$(CONFIG_ARCH_U8500) += \
dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ph1-ld4-ref.dtb \
uniphier-ph1-ld6b-ref.dtb \
uniphier-ph1-pro4-ace.dtb \
uniphier-ph1-pro4-ref.dtb \
uniphier-ph1-pro4-sanji.dtb \
uniphier-ph1-sld3-ref.dtb \
uniphier-ph1-sld8-ref.dtb \
uniphier-proxstream2-gentil.dtb \
......
arch/arm/boot/dts/at91-sama5d3_xplained.dts
View file @ 8a20a04b
......@@ -303,6 +303,7 @@ vcc_mmc0_reg: fixedregulator@0 {
regulator-name = "mmc0-card-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
gpio_keys {
......
arch/arm/boot/dts/at91-sama5d4_xplained.dts
View file @ 8a20a04b
......@@ -268,5 +268,6 @@ vcc_mmc1_reg: fixedregulator@1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_reg>;
regulator-always-on;
};
};
arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
View file @ 8a20a04b
......@@ -30,7 +30,7 @@ bp1 {
label = "BP1";
gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
gpio-key,wakeup;
wakeup-source;
};
};
......
arch/arm/boot/dts/imx25.dtsi
View file @ 8a20a04b
......@@ -269,14 +269,37 @@ uart5: serial@5002c000 {
status = "disabled";
};
tsc: tsc@50030000 {
compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
reg = <0x50030000 0x4000>;
tscadc: tscadc@50030000 {
compatible = "fsl,imx25-tsadc";
reg = <0x50030000 0xc>;
interrupts = <46>;
clocks = <&clks 119>;
clock-names = "ipg";
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
adc: adc@50030800 {
compatible = "fsl,imx25-gcq";
reg = <0x50030800 0x60>;
interrupt-parent = <&tscadc>;
interrupts = <1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
tsc: tcq@50030400 {
compatible = "fsl,imx25-tcq";
reg = <0x50030400 0x60>;
interrupt-parent = <&tscadc>;
interrupts = <0>;
fsl,wires = <4>;
status = "disabled";
};
};
ssi1: ssi@50034000 {
#sound-dai-cells = <0>;
......@@ -497,7 +520,8 @@ usbotg: usb@53ff4000 {
compatible = "fsl,imx25-usb", "fsl,imx27-usb";
reg = <0x53ff4000 0x0200>;
interrupts = <37>;
clocks = <&clks 70>;
clocks = <&clks 9>, <&clks 70>, <&clks 8>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
......@@ -507,7 +531,8 @@ usbhost1: usb@53ff4400 {
compatible = "fsl,imx25-usb", "fsl,imx27-usb";
reg = <0x53ff4400 0x0200>;
interrupts = <35>;
clocks = <&clks 70>;
clocks = <&clks 9>, <&clks 70>, <&clks 8>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
status = "disabled";
......@@ -516,8 +541,6 @@ usbhost1: usb@53ff4400 {
usbmisc: usbmisc@53ff4600 {
#index-cells = <1>;
compatible = "fsl,imx25-usbmisc";
clocks = <&clks 9>, <&clks 70>, <&clks 8>;
clock-names = "ipg", "ahb", "per";
reg = <0x53ff4600 0x00f>;
};
......
arch/arm/boot/dts/imx28-apf28dev.dts
View file @ 8a20a04b
......@@ -225,7 +225,7 @@ user-button {
label = "User button";
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
gpio-key,wakeup;
wakeup-source;
};
};
};
arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
View file @ 8a20a04b
......@@ -36,7 +36,7 @@ sw3 {
label = "SW3";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
gpio-key,wakeup;
wakeup-source;
};
};
......@@ -49,7 +49,7 @@ sw4 {
label = "SW4";
gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
gpio-key,wakeup;
wakeup-source;
};
};
......
arch/arm/boot/dts/imx28-tx28.dts
View file @ 8a20a04b
......@@ -130,7 +130,7 @@ mclk: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <27000000>;
clock-frequency = <26000000>;
};
};
......@@ -202,7 +202,7 @@ &gpio5 7 GPIO_ACTIVE_HIGH
0x02020049 /* row 2, col 2, KEY_KP9 */
>;
gpio-activelow;
linux,wakeup;
wakeup-source;
debounce-delay-ms = <100>;
col-scan-delay-us = <5000>;
linux,no-autorepeat;
......
arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
View file @ 8a20a04b
......@@ -30,7 +30,7 @@ bp1 {
label = "BP1";
gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
gpio-key,wakeup;
wakeup-source;
linux,input-type = <1>;
};
};
......
arch/arm/boot/dts/imx35.dtsi
View file @ 8a20a04b
......@@ -305,7 +305,8 @@ usbotg: usb@53ff4000 {
compatible = "fsl,imx35-usb", "fsl,imx27-usb";
reg = <0x53ff4000 0x0200>;
interrupts = <37>;
clocks = <&clks 73>;
clocks = <&clks 9>, <&clks 73>, <&clks 28>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
......@@ -315,7 +316,8 @@ usbhost1: usb@53ff4400 {
compatible = "fsl,imx35-usb", "fsl,imx27-usb";
reg = <0x53ff4400 0x0200>;
interrupts = <35>;
clocks = <&clks 73>;
clocks = <&clks 9>, <&clks 73>, <&clks 28>;
clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
dr_mode = "host";
......@@ -325,8 +327,6 @@ usbhost1: usb@53ff4400 {
usbmisc: usbmisc@53ff4600 {
#index-cells = <1>;
compatible = "fsl,imx35-usbmisc";
clocks = <&clks 9>, <&clks 73>, <&clks 28>;
clock-names = "ipg", "ahb", "per";
reg = <0x53ff4600 0x00f>;
};
};
......
arch/arm/boot/dts/imx51-babbage.dts
View file @ 8a20a04b
......@@ -107,7 +107,7 @@ power {
label = "Power Button";
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
gpio-key,wakeup;
wakeup-source;
};
};
......
arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
View file @ 8a20a04b
......@@ -156,7 +156,7 @@ &esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
cap-sdio-irq;
enable-sdio-wakeup;
wakeup-source;
keep-power-in-suspend;
max-frequency = <50000000>;
no-1-8-v;
......
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
View file @ 8a20a04b
......@@ -41,7 +41,7 @@ button-1 {
label = "BP1";
gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
linux,code = <256>;
gpio-key,wakeup;
wakeup-source;
linux,input-type = <1>;
};
};
......
arch/arm/boot/dts/imx51-pinfunc.h
View file @ 8a20a04b
......@@ -536,7 +536,6 @@
#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 0x2c4 0x6c4 0x000 0x3 0x0
#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK 0x2c4 0x6c4 0x000 0x0 0x0
#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 0x2c4 0x6c4 0x990 0x4 0x1
#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK 0x2c8 0x6c8 0x000 0x2 0x0
#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 0x2c8 0x6c8 0x000 0x2 0x0
#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 0x2c8 0x6c8 0x000 0x3 0x0
#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS 0x2c8 0x6c8 0x000 0x0 0x0
......
arch/arm/boot/dts/imx53-ard.dts
View file @ 8a20a04b
......@@ -69,21 +69,21 @@ home {
label = "Home";
gpios = <&gpio5 10 0>;
linux,code = <102>; /* KEY_HOME */
gpio-key,wakeup;
wakeup-source;
};
back {
label = "Back";
gpios = <&gpio5 11 0>;
linux,code = <158>; /* KEY_BACK */
gpio-key,wakeup;
wakeup-source;
};
program {
label = "Program";
gpios = <&gpio5 12 0>;
linux,code = <362>; /* KEY_PROGRAM */
gpio-key,wakeup;
wakeup-source;
};
volume-up {
......
arch/arm/boot/dts/imx53-qsb-common.dtsi
View file @ 8a20a04b
......@@ -59,22 +59,22 @@ gpio-keys {
power {
label = "Power Button";
gpios = <&gpio1 8 0>;
linux,code = <116>; /* KEY_POWER */
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
volume-up {
label = "Volume Up";
gpios = <&gpio2 14 0>;
linux,code = <115>; /* KEY_VOLUMEUP */
gpio-key,wakeup;
gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
wakeup-source;
};
volume-down {
label = "Volume Down";
gpios = <&gpio2 15 0>;
linux,code = <114>; /* KEY_VOLUMEDOWN */
gpio-key,wakeup;
gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
wakeup-source;
};
};
......
arch/arm/boot/dts/imx53-tx53-x03x.dts
View file @ 8a20a04b
......@@ -231,7 +231,7 @@ touchscreen: tsc2007@48 {
interrupts = <26 0>;
gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = <660>;
linux,wakeup;
wakeup-source;
};
};
......
arch/arm/boot/dts/imx53-tx53-x13x.dts
View file @ 8a20a04b
......@@ -101,7 +101,7 @@ touchscreen2: eeti@04 {
interrupt-parent = <&gpio3>;
interrupts = <23 0>;
wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
linux,wakeup;
wakeup-source;
};
};
......@@ -126,7 +126,7 @@ touchscreen1: eeti@04 {
interrupt-parent = <&gpio3>;
interrupts = <22 0>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
linux,wakeup;
wakeup-source;
};
};
......@@ -183,13 +183,14 @@ &ldb {
status = "okay";
lvds0: lvds-channel@0 {
fsl,data-mapping = "jeida";
fsl,data-width = <24>;
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
display-timings {
native-mode = <&lvds_timing0>;
lvds_timing0: hsd100pxn1 {
native-mode = <&lvds0_timing0>;
lvds0_timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
......@@ -202,19 +203,36 @@ lvds_timing0: hsd100pxn1 {
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
pixelclk-active = <1>;
};
lvds0_timing1: nl12880bc20 {
clock-frequency = <71000000>;
hactive = <1280>;
vactive = <800>;
hback-porch = <50>;
hsync-len = <60>;
hfront-porch = <50>;
vback-porch = <5>;
vsync-len = <13>;
vfront-porch = <5>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
lvds1: lvds-channel@1 {
fsl,data-mapping = "jeida";
fsl,data-width = <24>;
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
display-timings {
native-mode = <&lvds_timing1>;
lvds_timing1: hsd100pxn1 {
native-mode = <&lvds1_timing0>;
lvds1_timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
......@@ -227,7 +245,7 @@ lvds_timing1: hsd100pxn1 {
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
pixelclk-active = <1>;
};
};
};
......
arch/arm/boot/dts/imx53-tx53.dtsi
View file @ 8a20a04b
......@@ -37,7 +37,7 @@ mclk: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <27000000>;
clock-frequency = <26000000>;
};
};
......@@ -50,7 +50,7 @@ power {
label = "Power Button";
gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
wakeup-source;
};
};
......
arch/arm/boot/dts/imx6dl-tx6u-811x.dts
View file @ 8a20a04b
......@@ -77,7 +77,7 @@ polytouch2: eeti@04 {
interrupt-parent = <&gpio3>;
interrupts = <22 0>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
linux,wakeup;
wakeup-source;
};
};
......
arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
View file @ 8a20a04b
......@@ -13,7 +13,7 @@
#include "imx6qdl-wandboard-revb1.dtsi"
/ {
model = "Wandboard i.MX6 Dual Lite Board";
model = "Wandboard i.MX6 Dual Lite Board rev B1";
compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
memory {
......
arch/arm/boot/dts/imx6q-apalis-ixora.dts 0 → 100644
View file @ 8a20a04b
/*
* Copyright 2014-2016 Toradex AG
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6q.dtsi"
#include "imx6qdl-apalis.dtsi"
/ {
model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board";
compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
"fsl,imx6q";
aliases {
i2c0 = &i2cddc;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
};
aliases {
rtc0 = &rtc_i2c;
rtc1 = &snvs_rtc;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
wakeup {
label = "Wake-Up";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
debounce-interval = <10>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds_ixora>;
led4-green {
label = "LED_4_GREEN";
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
};
led4-red {
label = "LED_4_RED";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
};
led5-green {
label = "LED_5_GREEN";
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
};
led5-red {
label = "LED_5_RED";
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
};
};
pwmleds {
compatible = "pwm-leds";
ledpwm1 {
label = "PWM1";
pwms = <&pwm1 0 50000>;
max-brightness = <255>;
};
ledpwm2 {
label = "PWM2";
pwms = <&pwm2 0 50000>;
max-brightness = <255>;
};
ledpwm3 {
label = "PWM3";
pwms = <&pwm3 0 50000>;
max-brightness = <255>;
};
};
};
&backlight {
brightness-levels = <0 127 191 223 239 247 251 255>;
default-brightness-level = <1>;
status = "okay";
};
&can1 {
status = "okay";
};
&can2 {
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2cddc>;
status = "okay";
};
&i2cddc {
status = "okay";
};
/* GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
&i2c1 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
};
/* M41T0M6 real time clock on carrier board */
rtc_i2c: rtc@68 {
compatible = "st,m41t00";
reg = <0x68>;
};
};
&ldb {
status = "okay";
};
&pcie {
/* active-low meaning opposite of regular PERST# active-low polarity */
reset-gpio = <&gpio1 28 GPIO_ACTIVE_LOW>;
status = "okay";
};
&pwm1 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&pwm3 {
status = "okay";
};
&pwm4 {
status = "okay";
};
&reg_usb_otg_vbus {
status = "okay";
};
&reg_usb_host_vbus {
status = "okay";
};
&sata {
status = "okay";
};
&sound_spdif {
status = "okay";
};
&spdif {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart4 {
status = "okay";
};
&uart5 {
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usb_host_vbus>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
status = "okay";
};
/* SD1 */
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sd_cd>;
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
status = "okay";
};
&iomuxc {
/*
* Mux the Apalis GPIOs
* GPIO5, 6 used by optional fusion_F0710A kernel module
*/
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
&pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
&pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
&pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
>;
pinctrl_leds_ixora: ledsixoragrp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6q-b450v3.dts 0 → 100644
View file @ 8a20a04b
/*
* Copyright 2015 Timesys Corporation.
* Copyright 2015 General Electric Company
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6q-bx50v3.dtsi"
/ {
model = "General Electric B450v3";
compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q";
chosen {
stdout-path = &uart3;
};
panel-lvds0 {
compatible = "innolux,g121x1-l03";
backlight = <&backlight_lvds>;
power-supply = <&reg_lvds>;
port {
panel_in_lvds0: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
};
&ldb {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
status = "okay";
lvds0: lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
status = "okay";
port@4 {
reg = <4>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in_lvds0>;
};
};
};
};
arch/arm/boot/dts/imx6q-b650v3.dts 0 → 100644
View file @ 8a20a04b
/*
* Copyright 2015 Timesys Corporation.
* Copyright 2015 General Electric Company
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6q-bx50v3.dtsi"
/ {
model = "General Electric B650v3";
compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q";
chosen {
stdout-path = &uart3;
};
panel-lvds0 {
compatible = "innolux,g121x1-l03";
backlight = <&backlight_lvds>;
power-supply = <&reg_lvds>;
port {
panel_in_lvds0: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
};
&ldb {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
status = "okay";
lvds0: lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
status = "okay";
port@4 {
reg = <4>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in_lvds0>;
};
};
};
};
arch/arm/boot/dts/imx6q-b850v3.dts 0 → 100644
View file @ 8a20a04b
/*
* Copyright 2015 Timesys Corporation.
* Copyright 2015 General Electric Company
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6q-bx50v3.dtsi"
/ {
model = "General Electric B850v3";
compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
chosen {
stdout-path = &uart3;
};
panel-lvds0 {
compatible = "auo,b133htn01";
backlight = <&backlight_lvds>;
ddc-i2c-bus = <&mux2_i2c2>;
port {
panel_in_lvds0: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
};
&ldb {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
fsl,dual-channel;
status = "okay";
lvds0: lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
status = "okay";
port@4 {
reg = <4>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in_lvds0>;
};
};
};
};
&i2c2 {
pca9547_ddc: mux@70 {
compatible = "nxp,pca9547";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
mux2_i2c1: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
};
mux2_i2c2: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1>;
};
mux2_i2c3: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
};
mux2_i2c4: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
};
mux2_i2c5: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4>;
};
mux2_i2c6: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x5>;
};
mux2_i2c7: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x6>;
};
mux2_i2c8: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x7>;
};
};
};
&hdmi {
ddc-i2c-bus = <&mux2_i2c1>;
};
&mux1_i2c1 {
ads7830@4a {
compatible = "ti,ads7830";
reg = <0x4a>;
};
};
arch/arm/boot/dts/imx6q-ba16.dtsi 0 → 100644
View file @ 8a20a04b
/*
* Support for imx6 based Advantech DMS-BA16 Qseven module
*
* Copyright 2015 Timesys Corporation.
* Copyright 2015 General Electric Company
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx6q.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
memory {
reg = <0x10000000 0x40000000>;
};
backlight_lvds: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_display>;
pwms = <&pwm1 0 5000000>;
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100 101 102 103 104 105 106 107 108 109
110 111 112 113 114 115 116 117 118 119
120 121 122 123 124 125 126 127 128 129
130 131 132 133 134 135 136 137 138 139
140 141 142 143 144 145 146 147 148 149
150 151 152 153 154 155 156 157 158 159
160 161 162 163 164 165 166 167 168 169
170 171 172 173 174 175 176 177 178 179
180 181 182 183 184 185 186 187 188 189
190 191 192 193 194 195 196 197 198 199
200 201 202 203 204 205 206 207 208 209
210 211 212 213 214 215 216 217 218 219
220 221 222 223 224 225 226 227 228 229
230 231 232 233 234 235 236 237 238 239
240 241 242 243 244 245 246 247 248 249
250 251 252 253 254 255>;
default-brightness-level = <255>;
enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_lvds: regulator-lvds {
compatible = "regulator-fixed";
regulator-name = "lvds_ppen";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb_h1_vbus: regulator-usbh1vbus {
compatible = "regulator-fixed";
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usb_otg_vbus: regulator-usbotgvbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
flash: n25q032@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <0>;
partition@0 {
label = "U-Boot";
reg = <0x0 0xc0000>;
};
partition@c0000 {
label = "env";
reg = <0xc0000 0x10000>;
};
partition@d0000 {
label = "spare";
reg = <0xd0000 0x130000>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio7>;
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
onkey {
compatible = "dlg,da9063-onkey";
};
regulators {
vdd_bcore1: bcore1 {
regulator-min-microvolt = <1420000>;
regulator-max-microvolt = <1420000>;
regulator-always-on;
regulator-boot-on;
};
vdd_bcore2: bcore2 {
regulator-min-microvolt = <1420000>;
regulator-max-microvolt = <1420000>;
regulator-always-on;
regulator-boot-on;
};
vdd_bpro: bpro {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
vdd_bmem: bmem {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_bio: bio {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_bperi: bperi {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
vdd_ldo1: ldo1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1860000>;
};
vdd_ldo2: ldo2 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1860000>;
};
vdd_ldo3: ldo3 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3440000>;
};
vdd_ldo4: ldo4 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3440000>;
};
vdd_ldo5: ldo5 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3600000>;
};
vdd_ldo6: ldo6 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3600000>;
};
vdd_ldo7: ldo7 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3600000>;
};
vdd_ldo8: ldo8 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3600000>;
};
vdd_ldo9: ldo9 {
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <3600000>;
};
vdd_ldo10: ldo10 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3600000>;
};
vdd_ldo11: ldo11 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
regulator-boot-on;
};
};
};
rtc@32 {
compatible = "epson,rx8010";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc>;
reg = <0x32>;
interrupt-parent = <&gpio4>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
};
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
};
&sata {
status = "okay";
};
&ssi1 {
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
fsl,uart-has-rtscts;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbhub>;
vbus-supply = <&reg_usb_h1_vbus>;
reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
no-1-8-v;
keep-power-in-suspend;
wakeup-source;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
bus-width = <8>;
vmmc-supply = <&vdd_bperi>;
vqmmc-supply = <&vdd_bio>;
non-removable;
keep-power-in-suspend;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
>;
};
pinctrl_display: dispgrp {
fsl,pins = <
/* BLEN_OUT */
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
/* LVDS_PPEN_OUT */
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
/* SPI1 CS */
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
>;
};
pinctrl_ecspi5: ecspi5grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0
MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0
MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0
MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
/* FEC Reset */
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
/* AR8033 Interrupt */
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
>;
};
pinctrl_hog: hoggrp {
fsl,pins = <
/* GPIO 0-7 */
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0
MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0
/* SUS_S3_OUT to CPLD */
MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
/* PCIe Reset */
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
/* PCIe Wake */
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
/* PMIC Interrupt */
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
>;
};
pinctrl_pwm2: pwm2grp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
>;
};
pinctrl_rtc: rtcgrp {
fsl,pins = <
/* RTC_INT */
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
>;
};
pinctrl_usbhub: usbhubgrp {
fsl,pins = <
/* HUB_RESET */
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
/* uSDHC2 CD */
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
>;
};
pinctrl_usdhc3_reset: usdhc3grp-reset {
fsl,pins = <
MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9
>;
};
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
/* uSDHC4 CD */
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
/* uSDHC4 SDIO PWR */
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
/* uSDHC4 SDIO WP */
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
/* uSDHC4 SDIO LED */
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
>;
};
};
arch/arm/boot/dts/imx6q-bx50v3.dtsi 0 → 100644
View file @ 8a20a04b
/*
* Copyright 2015 Timesys Corporation.
* Copyright 2015 General Electric Company
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx6q-ba16.dtsi"
/ {
clocks {
mclk: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <22000000>;
};
};
reg_wl18xx_vmmc: regulator-wl18xx {
compatible = "regulator-fixed";
regulator-name = "vwl1807";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
reg_wlan: regulator-wlan {
compatible = "regulator-fixed";
regulator-name = "3P3V_wlan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
};
sound {
compatible = "fsl,imx6q-ba16-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6q-ba16-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&sgtl5000>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"LINE_IN", "Line In Jack",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&ecspi5 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi5>;
status = "okay";
m25_eeprom: m25p80@0 {
compatible = "atmel,at25";
spi-max-frequency = <20000000>;
size = <0x8000>;
pagesize = <64>;
reg = <0>;
address-width = <16>;
};
};
&i2c1 {
pca9547: mux@70 {
compatible = "nxp,pca9547";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
mux1_i2c1: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
ads7830: ads7830@48 {
compatible = "ti,ads7830";
reg = <0x48>;
};
mma8453: mma8453@1c {
compatible = "fsl,mma8453";
reg = <0x1c>;
};
};
mux1_i2c2: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1>;
eeprom: eeprom@50 {
compatible = "atmel,24c08";
reg = <0x50>;
};
mpl3115: mpl3115@60 {
compatible = "fsl,mpl3115";
reg = <0x60>;
};
};
mux1_i2c3: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
};
mux1_i2c4: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&mclk>;
VDDA-supply = <&reg_1p8v>;
VDDIO-supply = <&reg_3p3v>;
};
};
mux1_i2c5: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4>;
pca9539: pca9539@74 {
compatible = "nxp,pca9539";
reg = <0x74>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
};
};
mux1_i2c6: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x5>;
};
mux1_i2c7: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x6>;
};
mux1_i2c8: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x7>;
};
};
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <4>;
vmmc-supply = <&reg_wl18xx_vmmc>;
no-1-8-v;
non-removable;
wakeup-source;
keep-power-in-suspend;
cap-power-off-card;
max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wlcore: wlcore@2 {
compatible = "ti,wl1837";
reg = <2>;
interrupt-parent = <&gpio2>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
tcxo-clock-frequency = <26000000>;
};
};
arch/arm/boot/dts/imx6q-evi.dts 0 → 100644
View file @ 8a20a04b
/*
* Copyright 2016 United Western Technologies.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
*/
/dts-v1/;
#include "imx6q.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Uniwest Evi";
compatible = "uniwest,imx6q-evi", "fsl,imx6q";
memory {
reg = <0x10000000 0x40000000>;
};
reg_usbh1_vbus: regulator-usbhubreset {
compatible = "regulator-fixed";
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
startup-delay-us = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_hubreset>;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
};
reg_usb_otg_vbus: regulator-usbotgvbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotgvbus>;
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
panel {
compatible = "sharp,lq101k1ly04";
port {
panel_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
};
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
status = "okay";
};
&ecspi3 {
fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
<&gpio4 25 GPIO_ACTIVE_LOW>,
<&gpio4 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3cs>;
status = "okay";
};
&ecspi5 {
fsl,spi-num-chipselects = <4>;
cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
<&gpio1 13 GPIO_ACTIVE_LOW>,
<&gpio1 12 GPIO_ACTIVE_LOW>,
<&gpio2 9 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>;
status = "okay";
eeprom: m95m02@1 {
compatible = "st,m95m02", "atmel,at25";
size = <262144>;
pagesize = <256>;
address-width = <24>;
spi-max-frequency = <5000000>;
reg = <1>;
};
pb_rtc: rtc@3 {
compatible = "nxp,rtc-pcf2123";
spi-max-frequency = <2450000>;
spi-cs-high;
reg = <3>;
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio1 25 0>;
status = "okay";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpminand>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
status = "okay";
};
&i2c3 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_gpio>;
clock-frequency = <100000>;
scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
status = "okay";
battery: sbs-battery@b {
compatible = "sbs,sbs-battery";
reg = <0x0b>;
sbs,poll-retry-count = <100>;
sbs,i2c-retry-count = <100>;
};
};
&ldb {
status = "okay";
lvds0: lvds-channel@0 {
status = "okay";
port@4 {
reg = <4>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
&ssi1 {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usbh1_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
dr_mode = "host";
disable-over-current;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
dr_mode = "otg";
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
non-removable;
status = "okay";
};
&weim {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x08000000 0x08000000>;
fsl,weim-cs-gpr = <&gpr>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
/* pwr mcu alert irq */
MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
/* remainder ???? */
MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
>;
};
pinctrl_ecspi1cs: ecspi1csgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
>;
};
pinctrl_ecspi3: ecspi3grp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x10068
MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x10068
MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x1f068
>;
};
pinctrl_ecspi3cs: ecspi3csgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0
MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
>;
};
pinctrl_ecspi5: ecspi5grp {
fsl,pins = <
MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x100b1
MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x100b1
MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x100b1
>;
};
pinctrl_ecspi5cs: ecspi5csgrp {
fsl,pins = <
MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
>;
};
pinctrl_gpminand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_i2c3_gpio: i2c3gpiogrp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1
>;
};
pinctrl_weimcs: weimcsgrp {
fsl,pins = <
MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1
>;
};
pinctrl_weimfpga: weimfpgagrp {
fsl,pins = <
/* weim misc */
MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0b1
MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0b1
MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0xb0b1
MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0xb0b1
MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0xb0b1
MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0xb0b1
/* weim data */
MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0
MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0
MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0
MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0
MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0
MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0
MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0
MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0
MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0
MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0
MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0
MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0
MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0
MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0
MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0
MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0
MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
/* weim address */
MX6QDL_PAD_EIM_A25__EIM_ADDR25 0xb0b1
MX6QDL_PAD_EIM_A24__EIM_ADDR24 0xb0b1
MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x1b0b1
MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x1b0b1
>;
};
pinctrl_usbh1: usbh1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0
/* usbh1_b OC */
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
>;
};
pinctrl_usbh1_hubreset: usbh1hubresetgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
>;
};
pinctrl_usbotgvbus: usbotgvbusgrp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
>;
};
};
arch/arm/boot/dts/imx6q-gk802.dts
View file @ 8a20a04b
......@@ -44,7 +44,7 @@ recovery-button {
label = "recovery";
gpios = <&gpio3 16 1>;
linux,code = <0x198>; /* KEY_RESTART */
gpio-key,wakeup;
wakeup-source;
};
};
};
......
arch/arm/boot/dts/imx6q-icore-rqs.dts 0 → 100644
View file @ 8a20a04b
/*
* Copyright (C) 2015 Amarula Solutions B.V.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-icore-rqs.dtsi"
/ {
model = "Engicam i.CoreM6 Quad SOM";
compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
sound {
compatible = "fsl,imx-audio-sgtl5000";
model = "imx-audio-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&i2c3 {
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
VDDD-supply = <&reg_1p8v>;
};
};
&sata {
status = "okay";
};
arch/arm/boot/dts/imx6q-tbs2910.dts
View file @ 8a20a04b
......@@ -91,35 +91,26 @@ blue {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_2p5v: regulator@0 {
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
reg_3p3v: regulator@1 {
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_5p0v: regulator@2 {
reg_5p0v: regulator-5p0v {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "5P0V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
sound-sgtl5000 {
audio-codec = <&sgtl5000>;
......@@ -205,6 +196,10 @@ &pcie {
};
&sata {
fsl,transmit-level-mV = <1104>;
fsl,transmit-boost-mdB = <3330>;
fsl,transmit-atten-16ths = <16>;
fsl,receive-eq-mdB = <3000>;
status = "okay";
};
......@@ -253,6 +248,9 @@ &usdhc2 {
bus-width = <4>;
cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_3p3v>;
voltage-ranges = <3300 3300>;
no-1-8-v;
status = "okay";
};
......@@ -263,6 +261,9 @@ &usdhc3 {
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_3p3v>;
voltage-ranges = <3300 3300>;
no-1-8-v;
status = "okay";
};
......@@ -270,13 +271,15 @@ &usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_3p3v>;
voltage-ranges = <3300 3300>;
non-removable;
no-1-8-v;
status = "okay";
};
&iomuxc {
imx6q-tbs2910 {
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
......@@ -299,6 +302,18 @@ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b059
>;
};
pinctrl_gpio_fan: gpiofangrp {
fsl,pins = <
MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1
>;
};
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b1
>;
};
pinctrl_hdmi: hdmigrp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
......@@ -412,21 +427,4 @@ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
>;
};
};
gpio_fan {
pinctrl_gpio_fan: gpiofangrp {
fsl,pins = <
MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1
>;
};
};
gpio_leds {
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b1
>;
};
};
};
arch/arm/boot/dts/imx6q-tx6q-1110.dts
View file @ 8a20a04b
......@@ -77,7 +77,7 @@ polytouch1: eeti@04 {
interrupt-parent = <&gpio3>;
interrupts = <22 0>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
linux,wakeup;
wakeup-source;
};
};
......
arch/arm/boot/dts/imx6q-wandboard-revb1.dts
View file @ 8a20a04b
......@@ -13,7 +13,7 @@
#include "imx6qdl-wandboard-revb1.dtsi"
/ {
model = "Wandboard i.MX6 Quad Board";
model = "Wandboard i.MX6 Quad Board rev B1";
compatible = "wand,imx6q-wandboard", "fsl,imx6q";
memory {
......
arch/arm/boot/dts/imx6q.dtsi
View file @ 8a20a04b
......@@ -22,7 +22,7 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
......@@ -162,6 +162,7 @@ ipu2_di0_hdmi: endpoint@1 {
};
ipu2_di0_mipi: endpoint@2 {
remote-endpoint = <&mipi_mux_2>;
};
ipu2_di0_lvds0: endpoint@3 {
......@@ -183,6 +184,7 @@ ipu2_di1_hdmi: endpoint@1 {
};
ipu2_di1_mipi: endpoint@2 {
remote-endpoint = <&mipi_mux_3>;
};
ipu2_di1_lvds0: endpoint@3 {
......
arch/arm/boot/dts/imx6qdl-apalis.dtsi 0 → 100644
View file @ 8a20a04b
/*
* Copyright 2014-2016 Toradex AG
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Toradex Apalis iMX6Q/D Module";
compatible = "toradex,apalis_imx6q", "fsl,imx6q";
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
status = "disabled";
};
/* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
i2cddc: i2c@0 {
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c_ddc>;
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
&gpio2 30 GPIO_ACTIVE_HIGH /* scl */
>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
status = "disabled";
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
enable-active-high;
status = "disabled";
};
/* on module USB hub */
reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
regulator-name = "usb_host_vbus_hub";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
startup-delay-us = <2000>;
enable-active-high;
status = "okay";
};
reg_usb_host_vbus: regulator-usb-host-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
regulator-name = "usb_host_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_usb_host_vbus_hub>;
status = "disabled";
};
sound {
compatible = "fsl,imx-audio-sgtl5000";
model = "imx6q-apalis-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"LINE_IN", "Line In Jack",
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
sound_spdif: sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
spdif-controller = <&spdif>;
spdif-in;
spdif-out;
status = "disabled";
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
status = "disabled";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
status = "disabled";
};
/* Apalis SPI1 */
&ecspi1 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "disabled";
};
/* Apalis SPI2 */
&ecspi2 {
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "disabled";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-handle = <&ethphy>;
phy-reset-duration = <10>;
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy: ethernet-phy@7 {
interrupt-parent = <&gpio1>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
reg = <7>;
};
};
};
/*
* GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
* board)
*/
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "disabled";
};
/*
* PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
* touch screen controller
*/
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
pmic: pfuze100@08 {
compatible = "fsl,pfuze100";
reg = <0x08>;
regulators {
sw1a_reg: sw1ab {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw1c_reg: sw1c {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw3a_reg: sw3a {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
regulator-boot-on;
regulator-always-on;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
regulator-boot-on;
regulator-always-on;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
regulator-boot-on;
regulator-always-on;
};
vgen3_reg: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vgen4_reg: vgen4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vgen5_reg: vgen5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vgen6_reg: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 201>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
};
/* STMPE811 touch screen controller */
stmpe811@41 {
compatible = "st,stmpe811";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_touch_int>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x41>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio4>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
reg = <0>;
/* 3.25 MHz ADC clock speed */
st,adc-freq = <1>;
/* 8 sample average control */
st,ave-ctrl = <3>;
/* 7 length fractional part in z */
st,fraction-z = <7>;
/*
* 50 mA typical 80 mA max touchscreen drivers
* current limit value
*/
st,i-drive = <1>;
/* 12-bit ADC */
st,mod-12b = <1>;
/* internal ADC reference */
st,ref-sel = <0>;
/* ADC converstion time: 80 clocks */
st,sample-time = <4>;
/* 1 ms panel driver settling time */
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
};
};
};
/*
* GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused)
*/
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default", "recovery";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_recovery>;
scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
status = "disabled";
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "disabled";
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "disabled";
};
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "disabled";
};
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif>;
status = "disabled";
};
&ssi1 {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
fsl,dte-mode;
fsl,uart-has-rtscts;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_dte>;
fsl,dte-mode;
fsl,uart-has-rtscts;
status = "disabled";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4_dte>;
fsl,dte-mode;
status = "disabled";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_dte>;
fsl,dte-mode;
status = "disabled";
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
status = "disabled";
};
/* MMC1 */
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
vqmmc-supply = <&reg_3p3v>;
bus-width = <8>;
voltage-ranges = <3300 3300>;
status = "disabled";
};
/* SD1 */
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
vqmmc-supply = <&reg_3p3v>;
bus-width = <4>;
voltage-ranges = <3300 3300>;
status = "disabled";
};
/* eMMC */
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
vqmmc-supply = <&reg_3p3v>;
bus-width = <8>;
voltage-ranges = <3300 3300>;
non-removable;
status = "okay";
};
&weim {
status = "disabled";
};
&iomuxc {
/* pins used on module */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reset_moci>;
pinctrl_apalis_gpio1: gpio2io04grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
>;
};
pinctrl_apalis_gpio2: gpio2io05grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
>;
};
pinctrl_apalis_gpio3: gpio2io06grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
>;
};
pinctrl_apalis_gpio4: gpio2io07grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
>;
};
pinctrl_apalis_gpio5: gpio6io10grp {
fsl,pins = <
MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
>;
};
pinctrl_apalis_gpio6: gpio6io09grp {
fsl,pins = <
MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
>;
};
pinctrl_apalis_gpio7: gpio1io02grp {
fsl,pins = <
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
>;
};
pinctrl_apalis_gpio8: gpio1io06grp {
fsl,pins = <
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
>;
};
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
/* SGTL5000 sys_mclk */
MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
>;
};
pinctrl_cam_mclk: cammclkgrp {
fsl,pins = <
/* CAM sys_mclk */
MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
/* SPI1 cs */
MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
/* SPI2 cs */
MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
/* Ethernet PHY reset */
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0
/* Ethernet PHY interrupt */
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x000b1
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
>;
};
pinctrl_gpio_keys: gpio1io04grp {
fsl,pins = <
/* Power button */
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
>;
};
pinctrl_hdmi_cec: hdmicecgrp {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
>;
};
pinctrl_i2c_ddc: gpioi2cddcgrp {
fsl,pins = <
/* DDC bitbang */
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_i2c3_recovery: i2c3recoverygrp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
>;
};
pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0xb0b1
MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0xb0b1
MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0xb0b1
MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0xb0b1
MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0xb0b1
MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0xb0b1
MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0xb0b1
MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0xb0b1
MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0xb0b1
MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0xb0b1
>;
};
pinctrl_ipu1_lcdif: ipu1lcdifgrp {
fsl,pins = <
MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK 0x61
/* DE */
MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15 0x61
/* HSync */
MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02 0x61
/* VSync */
MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03 0x61
MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00 0x61
MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01 0x61
MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02 0x61
MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03 0x61
MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04 0x61
MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05 0x61
MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06 0x61
MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07 0x61
MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08 0x61
MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09 0x61
MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10 0x61
MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11 0x61
MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12 0x61
MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13 0x61
MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14 0x61
MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15 0x61
MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16 0x61
MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17 0x61
MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18 0x61
MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19 0x61
MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20 0x61
MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21 0x61
MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22 0x61
MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23 0x61
>;
};
pinctrl_ipu2_vdac: ipu2vdacgrp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15 0xd1
MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02 0xd1
MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03 0xd1
MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00 0xf9
MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01 0xf9
MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02 0xf9
MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03 0xf9
MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04 0xf9
MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05 0xf9
MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06 0xf9
MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07 0xf9
MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08 0xf9
MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09 0xf9
MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10 0xf9
MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11 0xf9
MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12 0xf9
MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13 0xf9
MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14 0xf9
MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15 0xf9
>;
};
pinctrl_mmc_cd: gpiommccdgrp {
fsl,pins = <
/* MMC1 CD */
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
>;
};
pinctrl_pwm2: pwm2grp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
>;
};
pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
fsl,pins = <
/* USBH_EN */
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
>;
};
pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
fsl,pins = <
/* USBH_HUB_EN */
MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
>;
};
pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
fsl,pins = <
/* USBO1 power en */
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
>;
};
pinctrl_reset_moci: gpioresetmocigrp {
fsl,pins = <
/* RESET_MOCI control */
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
>;
};
pinctrl_sd_cd: gpiosdcdgrp {
fsl,pins = <
/* SD1 CD */
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
>;
};
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
>;
};
pinctrl_touch_int: gpiotouchintgrp {
fsl,pins = <
/* STMPE811 interrupt */
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
>;
};
pinctrl_uart1_dce: uart1dcegrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
/* DTE mode */
pinctrl_uart1_dte: uart1dtegrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
>;
};
/* Additional DTR, DSR, DCD */
pinctrl_uart1_ctrl: uart1ctrlgrp {
fsl,pins = <
MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
>;
};
pinctrl_uart2_dce: uart2dcegrp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
>;
};
/* DTE mode */
pinctrl_uart2_dte: uart2dtegrp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1
MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1
MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1
MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1
>;
};
pinctrl_uart4_dce: uart4dcegrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
>;
};
/* DTE mode */
pinctrl_uart4_dte: uart4dtegrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
>;
};
pinctrl_uart5_dce: uart5dcegrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
>;
};
/* DTE mode */
pinctrl_uart5_dte: uart5dtegrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
/* eMMC reset */
MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059
>;
};
pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
/* eMMC reset */
MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9
>;
};
pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
/* eMMC reset */
MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9
>;
};
};
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
View file @ 8a20a04b
......@@ -94,7 +94,7 @@ user-button {
label = "User button";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
gpio-key,wakeup;
wakeup-source;
};
};
......
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
View file @ 8a20a04b
......@@ -320,13 +320,13 @@ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
>;
};
......
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
View file @ 8a20a04b
......@@ -473,7 +473,7 @@ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
>;
};
......
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
View file @ 8a20a04b
......@@ -462,7 +462,7 @@ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
>;
};
......
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
View file @ 8a20a04b
......@@ -397,8 +397,9 @@ &pwm3 {
};
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
pinctrl-names = "default", "state_dio";
pinctrl-0 = <&pinctrl_pwm4_backlight>;
pinctrl-1 = <&pinctrl_pwm4_dio>;
status = "okay";
};
......@@ -573,12 +574,20 @@ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
>;
};
pinctrl_pwm4: pwm4grp {
pinctrl_pwm4_backlight: pwm4grpbacklight {
fsl,pins = <
/* LVDS_PWM J6.5 */
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
>;
};
pinctrl_pwm4_dio: pwm4grpdio {
fsl,pins = <
/* DIO3 J16.4 */
MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
......
arch/arm/boot/dts/imx6qdl-gw552x.dtsi
View file @ 8a20a04b
......@@ -262,7 +262,7 @@ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
>;
};
......
arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
View file @ 8a20a04b
......@@ -48,7 +48,7 @@ chosen {
ir_recv: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio3 5 1>;
gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
};
......@@ -67,7 +67,7 @@ reg_3p3v: 3p3v {
reg_usbh1_vbus: usb-h1-vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 0 0>;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
regulator-name = "usb_h1_vbus";
......@@ -78,7 +78,7 @@ reg_usbh1_vbus: usb-h1-vbus {
reg_usbotg_vbus: usb-otg-vbus {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 22 0>;
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
regulator-name = "usb_otg_vbus";
......@@ -253,7 +253,7 @@ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
reset-gpio = <&gpio3 4 0>;
reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
......
arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi 0 → 100644
View file @ 8a20a04b
/*
* Copyright (C) 2015 Amarula Solutions B.V.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/imx6qdl-clock.h>
/ {
memory {
reg = <0x10000000 0x80000000>;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "1P8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_sd3_vmmc: regulator-sd3-vmmc {
compatible = "regulator-fixed";
regulator-name = "P3V3_SD3_SWITCHED";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
enable-active-high;
};
reg_sd4_vmmc: regulator-sd4-vmmc {
compatible = "regulator-fixed";
regulator-name = "P3V3_SD4_SWITCHED";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_usb_h1_vbus: regulator-usb-h1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
};
usb_hub: usb-hub {
compatible = "smsc,usb3503a";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbhub>;
reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
clock-names = "refclk";
};
};
&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-handle = <&eth_phy>;
phy-mode = "rgmii";
status = "okay";
mdio {
eth_phy: ethernet-phy {
rxc-skew-ps = <1140>;
txc-skew-ps = <1140>;
txen-skew-ps = <600>;
rxdv-skew-ps = <240>;
rxd0-skew-ps = <420>;
rxd1-skew-ps = <600>;
rxd2-skew-ps = <420>;
rxd3-skew-ps = <240>;
txd0-skew-ps = <60>;
txd1-skew-ps = <60>;
txd2-skew-ps = <60>;
txd3-skew-ps = <240>;
};
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
status = "okay";
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usb_h1_vbus>;
disable-over-current;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
no-1-8-v;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
vmcc-supply = <&reg_sd3_vmmc>;
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
bus-witdh=<4>;
no-1-8-v;
status = "okay";
};
&usdhc4 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc4>;
pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
vmcc-supply = <&reg_sd4_vmmc>;
bus-witdh=<8>;
no-1-8-v;
non-removable;
status = "okay";
};
&iomuxc {
pinctrl_audmux: audmux {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f059 /* PCIe Reset */
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
>;
};
pinctrl_usbhub: usbhubgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1f059 /* HUB USB Reset */
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17070
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10070
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1f059 /* CD */
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f059 /* PWR */
>;
};
pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B1
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B1
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B1
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B1
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B1
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B1
>;
};
pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
>;
};
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17070
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10070
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070
>;
};
pinctrl_usdhc4_100mhz: usdhc4grp_100mhz {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170B1
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100B1
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170B1
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170B1
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170B1
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170B1
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170B1
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170B1
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170B1
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170B1
>;
};
pinctrl_usdhc4_200mhz: usdhc4grp_200mhz {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x170F9
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x100F9
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170F9
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170F9
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170F9
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170F9
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170F9
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170F9
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170F9
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170F9
>;
};
};
arch/arm/boot/dts/imx6qdl-microsom.dtsi
View file @ 8a20a04b
......@@ -154,6 +154,7 @@ &usdhc1 {
bus-width = <4>;
mmc-pwrseq = <&usdhc1_pwrseq>;
keep-power-in-suspend;
no-1-8-v;
non-removable;
vmmc-supply = <&reg_brcm>;
status = "okay";
......
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
View file @ 8a20a04b
......@@ -138,7 +138,7 @@ power {
label = "Power Button";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-key,wakeup;
wakeup-source;
};
menu {
......
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
View file @ 8a20a04b
......@@ -119,7 +119,7 @@ power {
label = "Power Button";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-key,wakeup;
wakeup-source;
};
menu {
......
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
View file @ 8a20a04b
......@@ -105,7 +105,7 @@ power {
label = "Power Button";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-key,wakeup;
wakeup-source;
};
menu {
......
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View file @ 8a20a04b
......@@ -79,21 +79,21 @@ gpio-keys {
power {
label = "Power Button";
gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
gpio-key,wakeup;
wakeup-source;
linux,code = <KEY_POWER>;
};
volume-up {
label = "Volume Up";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
gpio-key,wakeup;
wakeup-source;
linux,code = <KEY_VOLUMEUP>;
};
volume-down {
label = "Volume Down";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
gpio-key,wakeup;
wakeup-source;
linux,code = <KEY_VOLUMEDOWN>;
};
};
......@@ -238,6 +238,7 @@ sw2_reg: sw2 {
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw3a_reg: sw3a {
......
arch/arm/boot/dts/imx6qdl-tx6.dtsi
View file @ 8a20a04b
......@@ -41,7 +41,7 @@ mclk: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <27000000>;
clock-frequency = <26000000>;
};
};
......@@ -52,7 +52,7 @@ power {
label = "Power Button";
gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_POWER>;
gpio-key,wakeup;
wakeup-source;
};
};
......@@ -227,6 +227,11 @@ spidev1: spi@1 {
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
clocks = <&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET>,
<&clks IMX6QDL_CLK_ENET_REF>,
<&clks IMX6QDL_CLK_ENET_REF>;
clock-names = "ipg", "ahb", "ptp", "enet_out";
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
phy-supply = <&reg_3v3_etn>;
......@@ -276,7 +281,7 @@ polytouch: edt-ft5x06@38 {
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
linux,wakeup;
wakeup-source;
};
touchscreen: tsc2007@48 {
......@@ -288,7 +293,7 @@ touchscreen: tsc2007@48 {
interrupts = <26 0>;
gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = <660>;
linux,wakeup;
wakeup-source;
};
};
......
arch/arm/boot/dts/imx6qdl-udoo.dtsi
View file @ 8a20a04b
......@@ -34,6 +34,18 @@ reg_usb_h1_vbus: regulator@0 {
gpio = <&gpio7 12 0>;
};
};
sound {
compatible = "fsl,imx6q-udoo-ac97",
"fsl,imx-audio-ac97";
model = "fsl,imx6q-udoo-ac97";
audio-cpu = <&ssi1>;
audio-routing =
"RX", "Mic Jack",
"Headphone Jack", "TX";
mux-int-port = <1>;
mux-ext-port = <6>;
};
};
&fec {
......@@ -109,6 +121,36 @@ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
>;
};
pinctrl_ac97_running: ac97running {
fsl,pins = <
MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0
MX6QDL_PAD_DI0_PIN3__AUD6_TXFS 0x1b0b0
MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0
MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
>;
};
pinctrl_ac97_warm_reset: ac97warmreset {
fsl,pins = <
MX6QDL_PAD_DI0_PIN2__AUD6_TXD 0x1b0b0
MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0
MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0
MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
>;
};
pinctrl_ac97_reset: ac97reset {
fsl,pins = <
MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0
MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0
MX6QDL_PAD_DI0_PIN4__AUD6_RXD 0x1b0b0
MX6QDL_PAD_DI0_PIN15__AUD6_TXC 0x1b0b0
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
>;
};
};
};
......@@ -132,3 +174,18 @@ &usdhc3 {
non-removable;
status = "okay";
};
&audmux {
status = "okay";
};
&ssi1 {
cell-index = <0>;
fsl,mode = "ac97-slave";
pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
pinctrl-0 = <&pinctrl_ac97_running>;
pinctrl-1 = <&pinctrl_ac97_reset>;
pinctrl-2 = <&pinctrl_ac97_warm_reset>;
ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
status = "okay";
};
arch/arm/boot/dts/imx6qdl.dtsi
View file @ 8a20a04b
......@@ -261,7 +261,7 @@ ecspi1: ecspi@02008000 {
clocks = <&clks IMX6QDL_CLK_ECSPI1>,
<&clks IMX6QDL_CLK_ECSPI1>;
clock-names = "ipg", "per";
dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -275,7 +275,7 @@ ecspi2: ecspi@0200c000 {
clocks = <&clks IMX6QDL_CLK_ECSPI2>,
<&clks IMX6QDL_CLK_ECSPI2>;
clock-names = "ipg", "per";
dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -289,7 +289,7 @@ ecspi3: ecspi@02010000 {
clocks = <&clks IMX6QDL_CLK_ECSPI3>,
<&clks IMX6QDL_CLK_ECSPI3>;
clock-names = "ipg", "per";
dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -303,7 +303,7 @@ ecspi4: ecspi@02014000 {
clocks = <&clks IMX6QDL_CLK_ECSPI4>,
<&clks IMX6QDL_CLK_ECSPI4>;
clock-names = "ipg", "per";
dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
dma-names = "rx", "tx";
status = "disabled";
};
......
arch/arm/boot/dts/imx6qp-sabreauto.dts 0 → 100644
View file @ 8a20a04b
/*
* Copyright 2016 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6qp.dtsi"
#include "imx6qdl-sabreauto.dtsi"
/ {
model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
};
&i2c2 {
max7322: gpio@68 {
compatible = "maxim,max7322";
reg = <0x68>;
gpio-controller;
#gpio-cells = <2>;
};
};
&iomuxc {
imx6qdl-sabreauto {
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
MX6QDL_PAD_KEY_COL2__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b018
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b018
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b018
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b018
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b018
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b018
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b018
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b018
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b018
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b018
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b018
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b018
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
>;
};
};
};
&pcie {
status = "disabled";
};
&vgen3_reg {
regulator-always-on;
};
arch/arm/boot/dts/imx6qp-sabresd.dts 0 → 100644
View file @ 8a20a04b
/*
* Copyright 2016 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6qp.dtsi"
#include "imx6qdl-sabresd.dtsi"
/ {
model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
};
&cpu0 {
arm-supply = <&sw2_reg>;
};
&iomuxc {
imx6qdl-sabresd {
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059
MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059
MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059
MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
>;
};
};
};
&pcie {
status = "disabled";
};
arch/arm/boot/dts/imx6qp.dtsi 0 → 100644
View file @ 8a20a04b
/*
* Copyright 2016 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx6q.dtsi"
/ {
soc {
ocram2: sram@00940000 {
compatible = "mmio-sram";
reg = <0x00940000 0x20000>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
ocram3: sram@00960000 {
compatible = "mmio-sram";
reg = <0x00960000 0x20000>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
ipu1: ipu@02400000 {
compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
clocks = <&clks IMX6QDL_CLK_IPU1>,
<&clks IMX6QDL_CLK_IPU1_DI0>, <&clks IMX6QDL_CLK_IPU1_DI1>,
<&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
<&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
<&clks IMX6QDL_CLK_PRG0_APB>;
clock-names = "bus",
"di0", "di1",
"di0_sel", "di1_sel",
"ldb_di0", "ldb_di1", "prg";
};
ipu2: ipu@02800000 {
compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
clocks = <&clks IMX6QDL_CLK_IPU2>,
<&clks IMX6QDL_CLK_IPU2_DI0>, <&clks IMX6QDL_CLK_IPU2_DI1>,
<&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
<&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
<&clks IMX6QDL_CLK_PRG1_APB>;
clock-names = "bus",
"di0", "di1",
"di0_sel", "di1_sel",
"ldb_di0", "ldb_di1", "prg";
};
};
};
arch/arm/boot/dts/imx6sl-warp.dts
View file @ 8a20a04b
......@@ -118,7 +118,7 @@ &usdhc3 {
bus-width = <4>;
non-removable;
keep-power-in-suspend;
enable-sdio-wakeup;
wakeup-source;
mmc-pwrseq = <&usdhc3_pwrseq>;
status = "okay";
};
......
arch/arm/boot/dts/imx6sx-sabreauto.dts
View file @ 8a20a04b
......@@ -52,7 +52,7 @@ &usdhc3 {
cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
enable-sdio-wakeup;
wakeup-source;
vmmc-supply = <&vcc_sd3>;
status = "okay";
};
......
arch/arm/boot/dts/imx6sx-sdb.dtsi
View file @ 8a20a04b
......@@ -184,6 +184,13 @@ &fec2 {
status = "okay";
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default";
......@@ -283,7 +290,7 @@ &usdhc2 {
non-removable;
no-1-8-v;
keep-power-in-suspend;
enable-sdio-wakeup;
wakeup-source;
status = "okay";
};
......@@ -296,7 +303,7 @@ &usdhc3 {
cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
enable-sdio-wakeup;
wakeup-source;
vmmc-supply = <&vcc_sd3>;
status = "okay";
};
......@@ -378,6 +385,13 @@ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x4001b8b1
MX6SX_PAD_KEY_COL4__I2C3_SCL 0x4001b8b1
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1
......
arch/arm/boot/dts/imx6ul-14x14-evk.dts
View file @ 8a20a04b
......@@ -8,7 +8,6 @@
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "imx6ul.dtsi"
/ {
......@@ -131,7 +130,7 @@ &usdhc1 {
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
keep-power-in-suspend;
enable-sdio-wakeup;
wakeup-source;
vmmc-supply = <&reg_sd1_vmmc>;
status = "okay";
};
......@@ -141,7 +140,7 @@ &usdhc2 {
pinctrl-0 = <&pinctrl_usdhc2>;
no-1-8-v;
keep-power-in-suspend;
enable-sdio-wakeup;
wakeup-source;
status = "okay";
};
......
arch/arm/boot/dts/imx6ul-pinfunc.h
View file @ 8a20a04b
......@@ -60,7 +60,7 @@
#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL 0x0050 0x02dc 0x0000 8 0
#define MX6UL_PAD_JTAG_TCK__SJC_TCK 0x0054 0x02e0 0x0000 0 0
#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2 0x0054 0x02e0 0x0000 1 0
#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0054 0x02e0 0x0000 2 0
#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0054 0x02e0 0x05f4 2 0
#define MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0054 0x02e0 0x0000 4 0
#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x0054 0x02e0 0x0000 5 0
#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL 0x0054 0x02e0 0x0000 8 0
......@@ -165,7 +165,7 @@
#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x0084 0x0310 0x0624 0 2
#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02 0x0084 0x0310 0x0000 1 0
#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x0084 0x0310 0x05b4 2 0
#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02 0x0084 0x0310 0x0000 3 0
#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02 0x0084 0x0310 0x04c4 3 1
#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1 0x0084 0x0310 0x0000 4 0
#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16 0x0084 0x0310 0x0000 5 0
#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT 0x0084 0x0310 0x0000 8 0
......@@ -173,31 +173,31 @@
#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0088 0x0314 0x0000 0 0
#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03 0x0088 0x0314 0x0000 1 0
#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x0088 0x0314 0x05b8 2 0
#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03 0x0088 0x0314 0x0000 3 0
#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03 0x0088 0x0314 0x04c8 3 1
#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK 0x0088 0x0314 0x0594 4 0
#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17 0x0088 0x0314 0x0000 5 0
#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN 0x0088 0x0314 0x0000 8 0
#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN 0x0088 0x0314 0x0618 8 1
#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x008c 0x0318 0x0000 0 0
#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x008c 0x0318 0x0620 0 2
#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK 0x008c 0x0318 0x0000 1 0
#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP 0x008c 0x0318 0x066c 2 1
#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04 0x008c 0x0318 0x0000 3 0
#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04 0x008c 0x0318 0x04d8 3 0
#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN 0x008c 0x0318 0x0000 4 0
#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x008c 0x0318 0x0000 5 0
#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP 0x008c 0x0318 0x0000 8 0
#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP 0x008c 0x0318 0x069c 8 1
#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0090 0x031c 0x0620 0 3
#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x0090 0x031c 0x0000 0 0
#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER 0x0090 0x031c 0x0000 1 0
#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x0090 0x031c 0x0668 2 1
#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05 0x0090 0x031c 0x0000 3 0
#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05 0x0090 0x031c 0x04cc 3 1
#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT 0x0090 0x031c 0x0000 4 0
#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0090 0x031c 0x0000 5 0
#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B 0x0090 0x031c 0x0000 8 0
#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B 0x0090 0x031c 0x0674 8 2
#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0094 0x0320 0x0000 0 0
#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0094 0x0320 0x062c 0 0
#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02 0x0094 0x0320 0x0000 1 0
#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x0094 0x0320 0x05bc 2 0
#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06 0x0094 0x0320 0x0000 3 0
#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06 0x0094 0x0320 0x04dc 3 0
#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1 0x0094 0x0320 0x058c 4 1
#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x0094 0x0320 0x0000 5 0
#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0000 8 0
......@@ -205,29 +205,29 @@
#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0098 0x0324 0x0000 0 0
#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03 0x0098 0x0324 0x0000 1 0
#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x0098 0x0324 0x05c0 2 0
#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07 0x0098 0x0324 0x0000 3 0
#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07 0x0098 0x0324 0x04e0 3 0
#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2 0x0098 0x0324 0x0590 4 0
#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x0098 0x0324 0x0000 5 0
#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE 0x0098 0x0324 0x0000 7 0
#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x0098 0x0324 0x0000 8 0
#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x0098 0x0324 0x0554 8 0
#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x009c 0x0328 0x0000 0 0
#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x009c 0x0328 0x0628 0 0
#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS 0x009c 0x0328 0x0000 1 0
#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x009c 0x0328 0x0000 2 0
#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08 0x009c 0x0328 0x0000 3 0
#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08 0x009c 0x0328 0x04e4 3 0
#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2 0x009c 0x0328 0x0000 4 0
#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x009c 0x0328 0x0000 5 0
#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B 0x009c 0x0328 0x0000 7 0
#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x009c 0x0328 0x0000 8 0
#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x009c 0x0328 0x055c 8 0
#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x00a0 0x032c 0x0628 0 1
#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x00a0 0x032c 0x0000 0 0
#define MX6UL_PAD_UART2_RTS_B__ENET1_COL 0x00a0 0x032c 0x0000 1 0
#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x00a0 0x032c 0x0588 2 0
#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09 0x00a0 0x032c 0x0000 3 0
#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09 0x00a0 0x032c 0x04e8 3 0
#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3 0x00a0 0x032c 0x0000 4 0
#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x00a0 0x032c 0x0000 5 0
#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL 0x00a0 0x032c 0x0000 7 0
#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x00a0 0x032c 0x0000 8 0
#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x00a0 0x032c 0x0558 8 0
#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x00a4 0x0330 0x0000 0 0
#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX 0x00a4 0x0330 0x0634 0 0
#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02 0x00a4 0x0330 0x0000 1 0
......@@ -237,7 +237,7 @@
#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x00a4 0x0330 0x0628 4 2
#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x00a4 0x0330 0x0000 5 0
#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT 0x00a4 0x0330 0x0000 7 0
#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x00a4 0x0330 0x0000 8 0
#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x00a4 0x0330 0x04b8 8 1
#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x00a8 0x0334 0x0634 0 1
#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX 0x00a8 0x0334 0x0000 0 0
#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03 0x00a8 0x0334 0x0000 1 0
......@@ -270,7 +270,7 @@
#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x0000 3 0
#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 0x00b4 0x0340 0x0000 4 0
#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x00b4 0x0340 0x0000 5 0
#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x00b4 0x0340 0x0000 8 0
#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x00b4 0x0340 0x0544 8 1
#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x00b8 0x0344 0x063c 0 1
#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX 0x00b8 0x0344 0x0000 0 0
#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03 0x00b8 0x0344 0x0000 1 0
......@@ -280,7 +280,7 @@
#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x00b8 0x0344 0x0000 5 0
#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0000 8 0
#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x00bc 0x0348 0x0000 5 0
#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x00bc 0x0348 0x0000 8 0
#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x00bc 0x0348 0x054c 8 0
#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x00bc 0x0348 0x0000 0 0
#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00bc 0x0348 0x0644 0 4
#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS 0x00bc 0x0348 0x0000 1 0
......@@ -294,7 +294,7 @@
#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0000 3 0
#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB 0x00c0 0x034c 0x0000 4 0
#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x00c0 0x034c 0x0000 5 0
#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x00c0 0x034c 0x0000 8 0
#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x00c0 0x034c 0x0548 8 1
#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x00c4 0x0350 0x0000 0 0
#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS 0x00c4 0x0350 0x0638 1 0
#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS 0x00c4 0x0350 0x0000 1 0
......@@ -355,7 +355,7 @@
#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x00dc 0x0368 0x0574 4 2
#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x00dc 0x0368 0x0000 5 0
#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03 0x00dc 0x0368 0x0000 6 0
#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK 0x00dc 0x0368 0x0000 8 0
#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK 0x00dc 0x0368 0x0594 8 1
#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x00e0 0x036c 0x0000 0 0
#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS 0x00e0 0x036c 0x0650 1 1
#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS 0x00e0 0x036c 0x0000 1 0
......@@ -364,7 +364,7 @@
#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE 0x00e0 0x036c 0x0000 4 0
#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x00e0 0x036c 0x0000 5 0
#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03 0x00e0 0x036c 0x0000 6 0
#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2 0x00e0 0x036c 0x0000 8 0
#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2 0x00e0 0x036c 0x0590 8 1
#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x00e4 0x0370 0x0000 0 0
#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x00e4 0x0370 0x0000 1 0
#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX 0x00e4 0x0370 0x064c 1 1
......@@ -382,7 +382,7 @@
#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x00e8 0x0374 0x0000 4 0
#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x00e8 0x0374 0x0000 5 0
#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x00e8 0x0374 0x0000 6 0
#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC 0x00e8 0x0374 0x0000 8 0
#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC 0x00e8 0x0374 0x0664 8 1
#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x00ec 0x0378 0x0000 0 0
#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0x00ec 0x0378 0x0000 1 0
#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX 0x00ec 0x0378 0x0654 1 0
......@@ -417,7 +417,7 @@
#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN 0x00f8 0x0384 0x0000 4 0
#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x00f8 0x0384 0x0000 5 0
#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x00f8 0x0384 0x0000 6 0
#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC 0x00f8 0x0384 0x0000 8 0
#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC 0x00f8 0x0384 0x0660 8 1
#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00fc 0x0388 0x0000 0 0
#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x00fc 0x0388 0x0000 1 0
#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS 0x00fc 0x0388 0x0658 1 0
......@@ -426,7 +426,7 @@
#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00fc 0x0388 0x057c 4 2
#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x00fc 0x0388 0x0000 5 0
#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x00fc 0x0388 0x0000 6 0
#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID 0x00fc 0x0388 0x0000 8 0
#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID 0x00fc 0x0388 0x04bc 8 1
#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x0100 0x038c 0x0000 0 0
#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x0100 0x038c 0x0658 1 1
#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS 0x0100 0x038c 0x0000 1 0
......@@ -488,14 +488,14 @@
#define MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x011c 0x03a8 0x05b4 4 2
#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x011c 0x03a8 0x0000 5 0
#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01 0x011c 0x03a8 0x0000 6 0
#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC 0x011c 0x03a8 0x0000 8 0
#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC 0x011c 0x03a8 0x05ec 8 0
#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x0120 0x03ac 0x0000 0 0
#define MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03ac 0x0000 1 0
#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN 0x0120 0x03ac 0x0000 3 0
#define MX6UL_PAD_LCD_DATA02__I2C4_SDA 0x0120 0x03ac 0x05c0 4 2
#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x0120 0x03ac 0x0000 5 0
#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02 0x0120 0x03ac 0x0000 6 0
#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK 0x0120 0x03ac 0x0000 8 0
#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK 0x0120 0x03ac 0x05e8 8 0
#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x0124 0x03b0 0x0000 0 0
#define MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03b0 0x0000 1 0
#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT 0x0124 0x03b0 0x0000 3 0
......@@ -548,7 +548,7 @@
#define MX6UL_PAD_LCD_DATA09__EIM_DATA01 0x013c 0x03c8 0x0000 4 0
#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x013c 0x03c8 0x0000 5 0
#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09 0x013c 0x03c8 0x0000 6 0
#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x013c 0x03c8 0x0000 8 0
#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x013c 0x03c8 0x0584 8 2
#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x0140 0x03cc 0x0000 0 0
#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC 0x0140 0x03cc 0x0000 1 0
#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x0000 3 0
......@@ -562,7 +562,7 @@
#define MX6UL_PAD_LCD_DATA11__EIM_DATA03 0x0144 0x03d0 0x0000 4 0
#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x0144 0x03d0 0x0000 5 0
#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11 0x0144 0x03d0 0x0000 6 0
#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0144 0x03d0 0x0000 8 0
#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0144 0x03d0 0x0588 8 2
#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x0148 0x03d4 0x0000 0 0
#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC 0x0148 0x03d4 0x060c 1 1
#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0000 3 0
......@@ -583,14 +583,14 @@
#define MX6UL_PAD_LCD_DATA14__EIM_DATA06 0x0150 0x03dc 0x0000 4 0
#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x0150 0x03dc 0x0000 5 0
#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14 0x0150 0x03dc 0x0000 6 0
#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4 0x0150 0x03dc 0x0000 8 0
#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4 0x0150 0x03dc 0x068c 8 0
#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x0154 0x03e0 0x0000 0 0
#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA 0x0154 0x03e0 0x0000 1 0
#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0000 3 0
#define MX6UL_PAD_LCD_DATA15__EIM_DATA07 0x0154 0x03e0 0x0000 4 0
#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x0154 0x03e0 0x0000 5 0
#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15 0x0154 0x03e0 0x0000 6 0
#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5 0x0154 0x03e0 0x0000 8 0
#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5 0x0154 0x03e0 0x0690 8 0
#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x0158 0x03e4 0x0000 0 0
#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0158 0x03e4 0x0000 1 0
#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX 0x0158 0x03e4 0x0654 1 2
......@@ -598,7 +598,7 @@
#define MX6UL_PAD_LCD_DATA16__EIM_DATA08 0x0158 0x03e4 0x0000 4 0
#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0158 0x03e4 0x0000 5 0
#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24 0x0158 0x03e4 0x0000 6 0
#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6 0x0158 0x03e4 0x0000 8 0
#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6 0x0158 0x03e4 0x0694 8 0
#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x015c 0x03e8 0x0000 0 0
#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x015c 0x03e8 0x0654 1 3
#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX 0x015c 0x03e8 0x0000 1 0
......@@ -606,7 +606,7 @@
#define MX6UL_PAD_LCD_DATA17__EIM_DATA09 0x015c 0x03e8 0x0000 4 0
#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x015c 0x03e8 0x0000 5 0
#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25 0x015c 0x03e8 0x0000 6 0
#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7 0x015c 0x03e8 0x0000 8 0
#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7 0x015c 0x03e8 0x0698 8 0
#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x0160 0x03ec 0x0000 0 0
#define MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x0160 0x03ec 0x0000 1 0
#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO 0x0160 0x03ec 0x0000 2 0
......@@ -614,11 +614,11 @@
#define MX6UL_PAD_LCD_DATA18__EIM_DATA10 0x0160 0x03ec 0x0000 4 0
#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x0160 0x03ec 0x0000 5 0
#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26 0x0160 0x03ec 0x0000 6 0
#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x0160 0x03ec 0x0000 8 0
#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x0160 0x03ec 0x0678 8 1
#define MX6UL_PAD_LCD_DATA19__EIM_DATA11 0x0164 0x03f0 0x0000 4 0
#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x0164 0x03f0 0x0000 5 0
#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27 0x0164 0x03f0 0x0000 6 0
#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x0164 0x03f0 0x0000 8 0
#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x0164 0x03f0 0x0670 8 1
#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x0164 0x03f0 0x0000 0 0
#define MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x0164 0x03f0 0x0000 1 0
#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY 0x0164 0x03f0 0x0000 2 0
......@@ -626,7 +626,7 @@
#define MX6UL_PAD_LCD_DATA20__EIM_DATA12 0x0168 0x03f4 0x0000 4 0
#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x0168 0x03f4 0x0000 5 0
#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28 0x0168 0x03f4 0x0000 6 0
#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x0168 0x03f4 0x0000 8 0
#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x0168 0x03f4 0x067c 8 1
#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x0168 0x03f4 0x0000 0 0
#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0168 0x03f4 0x0000 1 0
#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX 0x0168 0x03f4 0x065c 1 2
......@@ -640,7 +640,7 @@
#define MX6UL_PAD_LCD_DATA21__EIM_DATA13 0x016c 0x03f8 0x0000 4 0
#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x016c 0x03f8 0x0000 5 0
#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29 0x016c 0x03f8 0x0000 6 0
#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x016c 0x03f8 0x0000 8 0
#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x016c 0x03f8 0x0680 8 1
#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x0170 0x03fc 0x0000 0 0
#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT 0x0170 0x03fc 0x0000 1 0
#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x0170 0x03fc 0x053c 2 0
......@@ -648,7 +648,7 @@
#define MX6UL_PAD_LCD_DATA22__EIM_DATA14 0x0170 0x03fc 0x0000 4 0
#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x0170 0x03fc 0x0000 5 0
#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30 0x0170 0x03fc 0x0000 6 0
#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x0170 0x03fc 0x0000 8 0
#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x0170 0x03fc 0x0684 8 0
#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x0174 0x0400 0x0000 0 0
#define MX6UL_PAD_LCD_DATA23__MQS_LEFT 0x0174 0x0400 0x0000 1 0
#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x0174 0x0400 0x0538 2 0
......@@ -656,7 +656,7 @@
#define MX6UL_PAD_LCD_DATA23__EIM_DATA15 0x0174 0x0400 0x0000 4 0
#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x0174 0x0400 0x0000 5 0
#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31 0x0174 0x0400 0x0000 6 0
#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x0174 0x0400 0x0000 8 0
#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x0174 0x0400 0x0688 8 1
#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0178 0x0404 0x0000 0 0
#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x0178 0x0404 0x0670 1 2
#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK 0x0178 0x0404 0x0000 2 0
......@@ -784,7 +784,7 @@
#define MX6UL_PAD_NAND_DQS__EIM_WAIT 0x01b8 0x0444 0x0000 4 0
#define MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x01b8 0x0444 0x0000 5 0
#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0000 6 0
#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK 0x01b8 0x0444 0x0000 8 0
#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK 0x01b8 0x0444 0x061c 8 1
#define MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x01bc 0x0448 0x0000 0 0
#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1 0x01bc 0x0448 0x0000 1 0
#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC 0x01bc 0x0448 0x0000 2 0
......@@ -799,14 +799,14 @@
#define MX6UL_PAD_SD1_CLK__SPDIF_IN 0x01c0 0x044c 0x0618 3 3
#define MX6UL_PAD_SD1_CLK__EIM_ADDR20 0x01c0 0x044c 0x0000 4 0
#define MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x01c0 0x044c 0x0000 5 0
#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x01c0 0x044c 0x0000 8 0
#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x01c0 0x044c 0x0664 8 2
#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x01c4 0x0450 0x0000 0 0
#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3 0x01c4 0x0450 0x0000 1 0
#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC 0x01c4 0x0450 0x05fc 2 1
#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX 0x01c4 0x0450 0x0000 3 0
#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21 0x01c4 0x0450 0x0000 4 0
#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x01c4 0x0450 0x0000 5 0
#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x01c4 0x0450 0x0000 8 0
#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x01c4 0x0450 0x04b8 8 2
#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x01c8 0x0454 0x0000 0 0
#define MX6UL_PAD_SD1_DATA1__GPT2_CLK 0x01c8 0x0454 0x05a0 1 1
#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK 0x01c8 0x0454 0x05f8 2 1
......@@ -821,7 +821,7 @@
#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23 0x01cc 0x0458 0x0000 4 0
#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x01cc 0x0458 0x0000 5 0
#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1 0x01cc 0x0458 0x0000 6 0
#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC 0x01cc 0x0458 0x0000 8 0
#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC 0x01cc 0x0458 0x0660 8 2
#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x01d0 0x045c 0x0000 0 0
#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2 0x01d0 0x045c 0x059c 1 1
#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA 0x01d0 0x045c 0x0000 2 0
......@@ -829,7 +829,7 @@
#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24 0x01d0 0x045c 0x0000 4 0
#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x01d0 0x045c 0x0000 5 0
#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2 0x01d0 0x045c 0x0000 6 0
#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID 0x01d0 0x045c 0x0000 8 0
#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID 0x01d0 0x045c 0x04bc 8 2
#define MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x01d4 0x0460 0x0000 0 0
#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B 0x01d4 0x0460 0x0674 1 0
#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B 0x01d4 0x0460 0x0000 2 0
......@@ -909,7 +909,7 @@
#define MX6UL_PAD_CSI_DATA04__EIM_AD04 0x01f4 0x0480 0x0000 4 0
#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x01f4 0x0480 0x0000 5 0
#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x01f4 0x0480 0x05ec 6 1
#define MX6UL_PAD_CSI_DATA04__USDHC1_WP 0x01f4 0x0480 0x0000 8 0
#define MX6UL_PAD_CSI_DATA04__USDHC1_WP 0x01f4 0x0480 0x066c 8 2
#define MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x01f8 0x0484 0x04e0 0 1
#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5 0x01f8 0x0484 0x0690 1 2
#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0x01f8 0x0484 0x0000 2 0
......@@ -917,7 +917,7 @@
#define MX6UL_PAD_CSI_DATA05__EIM_AD05 0x01f8 0x0484 0x0000 4 0
#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x01f8 0x0484 0x0000 5 0
#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x01f8 0x0484 0x05e8 6 1
#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B 0x01f8 0x0484 0x0000 8 0
#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B 0x01f8 0x0484 0x0668 8 2
#define MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x01fc 0x0488 0x04e4 0 1
#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6 0x01fc 0x0488 0x0694 1 2
#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0x01fc 0x0488 0x0000 2 0
......
arch/arm/boot/dts/imx6ul.dtsi
View file @ 8a20a04b
......@@ -8,6 +8,7 @@
#include <dt-bindings/clock/imx6ul-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "imx6ul-pinfunc.h"
#include "skeleton.dtsi"
......@@ -140,6 +141,39 @@ ocram: sram@00900000 {
reg = <0x00900000 0x20000>;
};
dma_apbh: dma-apbh@01804000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x01804000 0x2000>;
interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
<0 13 IRQ_TYPE_LEVEL_HIGH>,
<0 13 IRQ_TYPE_LEVEL_HIGH>,
<0 13 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
#dma-cells = <1>;
dma-channels = <4>;
clocks = <&clks IMX6UL_CLK_APBHDMA>;
};
gpmi: gpmi-nand@01806000 {
compatible = "fsl,imx6q-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bch";
clocks = <&clks IMX6UL_CLK_GPMI_IO>,
<&clks IMX6UL_CLK_GPMI_APB>,
<&clks IMX6UL_CLK_GPMI_BCH>,
<&clks IMX6UL_CLK_GPMI_BCH_APB>,
<&clks IMX6UL_CLK_PER_BCH>;
clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
"gpmi_bch_apb", "per1_bch";
dmas = <&dma_apbh 0>;
dma-names = "rx-tx";
status = "disabled";
};
aips1: aips-bus@02000000 {
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
......@@ -234,6 +268,126 @@ uart8: serial@02024000 {
clock-names = "ipg", "per";
status = "disabled";
};
sai1: sai@02028000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
reg = <0x02028000 0x4000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
<&clks IMX6UL_CLK_SAI1>,
<&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma 35 24 0>,
<&sdma 36 24 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai2: sai@0202c000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
reg = <0x0202c000 0x4000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
<&clks IMX6UL_CLK_SAI2>,
<&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma 37 24 0>,
<&sdma 38 24 0>;
dma-names = "rx", "tx";
status = "disabled";
};
sai3: sai@02030000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
reg = <0x02030000 0x4000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
<&clks IMX6UL_CLK_SAI3>,
<&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dmas = <&sdma 39 24 0>,
<&sdma 40 24 0>;
dma-names = "rx", "tx";
status = "disabled";
};
};
tsc: tsc@02040000 {
compatible = "fsl,imx6ul-tsc";
reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_IPG>,
<&clks IMX6UL_CLK_ADC2>;
clock-names = "tsc", "adc";
status = "disabled";
};
pwm1: pwm@02080000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02080000 0x4000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM1>,
<&clks IMX6UL_CLK_PWM1>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm2: pwm@02084000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02084000 0x4000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM2>,
<&clks IMX6UL_CLK_PWM2>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm3: pwm@02088000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x02088000 0x4000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM3>,
<&clks IMX6UL_CLK_PWM3>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm4: pwm@0208c000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x0208c000 0x4000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_PWM4>,
<&clks IMX6UL_CLK_PWM4>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
can1: flexcan@02090000 {
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
reg = <0x02090000 0x4000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
<&clks IMX6UL_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
can2: flexcan@02094000 {
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
reg = <0x02094000 0x4000>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
<&clks IMX6UL_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
status = "disabled";
};
gpt1: gpt@02098000 {
......@@ -317,6 +471,14 @@ fec2: ethernet@020b4000 {
status = "disabled";
};
kpp: kpp@020b8000 {
compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_KPP>;
status = "disabled";
};
wdog1: wdog@020bc000 {
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
......@@ -487,49 +649,65 @@ gpt2: gpt@020e8000 {
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
reg = <0x020e8000 0x4000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_DUMMY>,
<&clks IMX6UL_CLK_DUMMY>;
clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
<&clks IMX6UL_CLK_GPT2_SERIAL>;
clock-names = "ipg", "per";
};
sdma: sdma@020ec000 {
compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
"fsl,imx35-sdma";
reg = <0x020ec000 0x4000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_SDMA>,
<&clks IMX6UL_CLK_SDMA>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
};
pwm5: pwm@020f0000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f0000 0x4000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_DUMMY>,
<&clks IMX6UL_CLK_DUMMY>;
clocks = <&clks IMX6UL_CLK_PWM5>,
<&clks IMX6UL_CLK_PWM5>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm6: pwm@020f4000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f4000 0x4000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_DUMMY>,
<&clks IMX6UL_CLK_DUMMY>;
clocks = <&clks IMX6UL_CLK_PWM6>,
<&clks IMX6UL_CLK_PWM6>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm7: pwm@020f8000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f8000 0x4000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_DUMMY>,
<&clks IMX6UL_CLK_DUMMY>;
clocks = <&clks IMX6UL_CLK_PWM7>,
<&clks IMX6UL_CLK_PWM7>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
pwm8: pwm@020fc000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020fc000 0x4000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_DUMMY>,
<&clks IMX6UL_CLK_DUMMY>;
clocks = <&clks IMX6UL_CLK_PWM8>,
<&clks IMX6UL_CLK_PWM8>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
status = "disabled";
};
};
......@@ -590,17 +768,6 @@ fec1: ethernet@02188000 {
status = "disabled";
};
tsc: tsc@02040000 {
compatible = "fsl,imx6ul-tsc";
reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_IPG>,
<&clks IMX6UL_CLK_ADC2>;
clock-names = "tsc", "adc";
status = "disabled";
};
usdhc1: usdhc@02190000 {
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
reg = <0x02190000 0x4000>;
......@@ -672,6 +839,17 @@ mmdc: mmdc@021b0000 {
reg = <0x021b0000 0x4000>;
};
lcdif: lcdif@021c8000 {
compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
reg = <0x021c8000 0x4000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
<&clks IMX6UL_CLK_LCDIF_APB>,
<&clks IMX6UL_CLK_DUMMY>;
clock-names = "pix", "axi", "disp_axi";
status = "disabled";
};
qspi: qspi@021e0000 {
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm/boot/dts/imx7d-sbc-imx7.dts
View file @ 8a20a04b
......@@ -22,7 +22,7 @@ &usdhc1 {
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
enable-sdio-wakeup;
wakeup-source;
status = "okay";
};
......
arch/arm/boot/dts/imx7d-sdb.dts
View file @ 8a20a04b
......@@ -296,7 +296,7 @@ &usdhc1 {
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
enable-sdio-wakeup;
wakeup-source;
keep-power-in-suspend;
status = "okay";
};
......
arch/arm/boot/dts/imx7d.dtsi
View file @ 8a20a04b
......@@ -119,6 +119,15 @@ osc: clock-osc {
clock-output-names = "osc";
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&intc>;
};
etr@30086000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0x30086000 0x1000>;
......
arch/arm/boot/dts/ls1021a.dtsi
View file @ 8a20a04b
......@@ -572,5 +572,49 @@ usb3@3100000 {
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
};
pcie@3400000 {
compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
fsl,pcie-scfg = <&scfg 0>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
};
pcie@3500000 {
compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
fsl,pcie-scfg = <&scfg 1>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
arch/arm/boot/dts/uniphier-common32.dtsi
View file @ 8a20a04b
......@@ -45,6 +45,13 @@
/include/ "skeleton.dtsi"
/ {
clocks {
refclk: ref {
#clock-cells = <0>;
compatible = "fixed-clock";
};
};
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -52,12 +59,6 @@ soc: soc {
ranges;
interrupt-parent = <&intc>;
extbus: extbus {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
};
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
......@@ -98,9 +99,17 @@ serial3: serial@54006b00 {
clocks = <&uart_clk>;
};
system-bus-controller@58c00000 {
compatible = "socionext,uniphier-system-bus-controller";
reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
status = "disabled";
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
};
smpctrl@59800000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
timer@60000200 {
......
arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
View file @ 8a20a04b
......@@ -72,14 +72,6 @@ aliases {
};
};
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc {
interrupts = <0 49 4>;
};
......
arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
View file @ 8a20a04b
......@@ -173,6 +173,10 @@ usb2: usb@5a820100 {
};
&refclk {
clock-frequency = <24576000>;
};
&serial3 {
interrupts = <0 29 4>;
};
......
arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
View file @ 8a20a04b
......@@ -74,14 +74,6 @@ aliases {
};
};
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc {
interrupts = <0 52 4>;
};
......
arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts 0 → 100644
View file @ 8a20a04b
/*
* Device Tree Source for UniPhier PH1-Pro4 Ace Board
*
* Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/include/ "uniphier-ph1-pro4.dtsi"
/ {
model = "UniPhier PH1-Pro4 Ace Board";
compatible = "socionext,ph1-pro4-ace", "socionext,ph1-pro4";
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c5 = &i2c5;
i2c6 = &i2c6;
};
};
&serial0 {
status = "okay";
};
&serial1 {
status = "okay";
};
&serial2 {
status = "okay";
};
&i2c0 {
status = "okay";
eeprom@54 {
compatible = "st,24c64";
reg = <0x54>;
};
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&usb2 {
status = "okay";
};
&usb3 {
status = "okay";
};
arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
View file @ 8a20a04b
......@@ -74,14 +74,6 @@ aliases {
};
};
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc {
interrupts = <0 50 4>;
};
......
arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts 0 → 100644
View file @ 8a20a04b
/*
* Device Tree Source for UniPhier PH1-Pro4 Sanji Board
*
* Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/include/ "uniphier-ph1-pro4.dtsi"
/ {
model = "UniPhier PH1-Pro4 Sanji Board";
compatible = "socionext,ph1-pro4-sanji", "socionext,ph1-pro4";
memory {
device_type = "memory";
reg = <0x80000000 0x80000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
serial0 = &serial0;
serial1 = &serial1;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c5 = &i2c5;
i2c6 = &i2c6;
};
};
&serial0 {
status = "okay";
};
&serial1 {
status = "okay";
};
&i2c0 {
status = "okay";
eeprom@54 {
compatible = "st,24c64";
reg = <0x54>;
};
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&usb2 {
status = "okay";
};
&usb3 {
status = "okay";
};
arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
View file @ 8a20a04b
......@@ -195,6 +195,10 @@ usb3: usb@5a810100 {
};
};
&refclk {
clock-frequency = <25000000>;
};
&pinctrl {
compatible = "socionext,ph1-pro4-pinctrl", "syscon";
};
arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
View file @ 8a20a04b
......@@ -189,6 +189,10 @@ i2c6: i2c@58786000 {
};
};
&refclk {
clock-frequency = <20000000>;
};
&pinctrl {
compatible = "socionext,ph1-pro5-pinctrl", "syscon";
};
arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
View file @ 8a20a04b
......@@ -73,14 +73,6 @@ aliases {
};
};
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc {
interrupts = <0 49 4>;
};
......
arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
View file @ 8a20a04b
......@@ -68,6 +68,12 @@ cpu@1 {
};
clocks {
refclk: ref {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24576000>;
};
arm_timer_clk: arm_timer_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
......@@ -94,12 +100,6 @@ soc {
ranges;
interrupt-parent = <&intc>;
extbus: extbus {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
};
timer@20000200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20000200 0x20>;
......@@ -216,9 +216,17 @@ i2c4: i2c@58600000 {
clock-frequency = <400000>;
};
system-bus-controller@58c00000 {
compatible = "socionext,uniphier-system-bus-controller";
reg = <0x58c00000 0x400>, <0x59800000 0x2000>;
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
status = "disabled";
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
};
smpctrl@59800000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
usb0: usb@5a800100 {
......
arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
View file @ 8a20a04b
......@@ -72,14 +72,6 @@ aliases {
};
};
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc {
interrupts = <0 48 4>;
};
......
arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
View file @ 8a20a04b
......@@ -172,6 +172,10 @@ usb2: usb@5a820100 {
};
};
&refclk {
clock-frequency = <25000000>;
};
&serial3 {
interrupts = <0 29 4>;
};
......
arch/arm/boot/dts/uniphier-pinctrl.dtsi
View file @ 8a20a04b
......@@ -63,6 +63,11 @@ pinctrl_i2c3: i2c3_grp {
function = "i2c3";
};
pinctrl_i2c4: i2c4_grp {
groups = "i2c4";
function = "i2c4";
};
pinctrl_uart0: uart0_grp {
groups = "uart0";
function = "uart0";
......
arch/arm/boot/dts/uniphier-proxstream2-gentil.dts
View file @ 8a20a04b
......@@ -63,6 +63,7 @@ aliases {
serial1 = &serial1;
serial2 = &serial2;
i2c0 = &i2c0;
i2c2 = &i2c2;
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
......@@ -75,4 +76,13 @@ &serial2 {
&i2c0 {
status = "okay";
eeprom@54 {
compatible = "st,24c64";
reg = <0x54>;
};
};
&i2c2 {
status = "okay";
};
arch/arm/boot/dts/uniphier-proxstream2.dtsi
View file @ 8a20a04b
......@@ -200,6 +200,10 @@ i2c6: i2c@58786000 {
};
};
&refclk {
clock-frequency = <25000000>;
};
&pinctrl {
compatible = "socionext,proxstream2-pinctrl", "syscon";
};
arch/arm/boot/dts/uniphier-ref-daughter.dtsi
View file @ 8a20a04b
......@@ -43,7 +43,7 @@
*/
&i2c0 {
eeprom {
eeprom@50 {
compatible = "microchip,24lc128";
reg = <0x50>;
};
......
arch/arm/boot/dts/uniphier-support-card.dtsi
View file @ 8a20a04b
......@@ -42,11 +42,15 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
&extbus {
&system_bus {
status = "okay";
ranges = <1 0x00000000 0x42000000 0x02000000>;
support_card: support_card {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 1 0x01f00000 0x00100000>;
ethsc: ethernet@00000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
......
arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
View file @ 8a20a04b
/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
......@@ -18,38 +50,36 @@ clk16m: clk16m {
clock-frequency = <16000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
sys_5v0_reg: regulator@0 {
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "5v0";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
/* USBH_PEN */
usbh_vbus_reg: regulator@1 {
reg_usbh_vbus: regulator-usbh-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_reg>;
reg = <1>;
regulator-name = "usbh_vbus";
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio2 19 GPIO_ACTIVE_LOW>;
vin-supply = <&sys_5v0_reg>;
};
gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
vin-supply = <&reg_5v0>;
};
};
&bl {
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&reg_3v3>;
status = "okay";
};
......@@ -100,6 +130,10 @@ &pwm1 {
status = "okay";
};
&reg_module_3v3 {
vin-supply = <&reg_3v3>;
};
&uart0 {
status = "okay";
};
......@@ -113,7 +147,7 @@ &uart2 {
};
&usbh1 {
vbus-supply = <&usbh_vbus_reg>;
vbus-supply = <&reg_usbh_vbus>;
};
&iomuxc {
......
arch/arm/boot/dts/vf-colibri.dtsi
View file @ 8a20a04b
/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
bl: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>;
pwms = <&pwm0 0 5000000 0>;
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_module_3v3_avdd: regulator-module-3v3-avdd {
compatible = "regulator-fixed";
regulator-name = "+V3.3_AVDD_AUDIO";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
&adc0 {
status = "okay";
vref-supply = <&reg_module_3v3_avdd>;
};
&adc1 {
status = "okay";
vref-supply = <&reg_module_3v3_avdd>;
};
&can0 {
......@@ -35,6 +86,13 @@ &can1 {
status = "disabled";
};
&clks {
assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
<&clks VF610_CLK_ENET_TS_SEL>;
assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
<&clks VF610_CLK_ENET_50M>;
};
&dspi1 {
bus-num = <1>;
pinctrl-names = "default";
......@@ -50,10 +108,12 @@ &esdhc1 {
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
disable-wp;
};
&fec1 {
phy-mode = "rmii";
phy-supply = <&reg_module_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
};
......@@ -195,6 +255,12 @@ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
>;
};
pinctrl_gpio_bl_on: gpio_bl_on {
fsl,pins = <
VF610_PAD_PTC0__GPIO_45 0x22ef
>;
};
pinctrl_i2c0: i2c0grp {
fsl,pins = <
VF610_PAD_PTB14__I2C0_SCL 0x37ff
......@@ -239,6 +305,8 @@ pinctrl_uart0: uart0grp {
fsl,pins = <
VF610_PAD_PTB10__UART0_TX 0x21a2
VF610_PAD_PTB11__UART0_RX 0x21a1
VF610_PAD_PTB12__UART0_RTS 0x21a2
VF610_PAD_PTB13__UART0_CTS 0x21a1
>;
};
......
arch/arm/boot/dts/vf500-colibri-eval-v3.dts
View file @ 8a20a04b
/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
......
arch/arm/boot/dts/vf500-colibri.dtsi
View file @ 8a20a04b
/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "vf500.dtsi"
......
arch/arm/boot/dts/vf500.dtsi
View file @ 8a20a04b
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
......@@ -43,6 +75,15 @@ global_timer: timer@40002200 {
clocks = <&clks VF610_CLK_PLATFORM_BUS>;
};
};
aips-bus@40080000 {
pmu@40089000 {
compatible = "arm,cortex-a5-pmu";
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&a5_cpu>;
};
};
};
};
......
arch/arm/boot/dts/vf610-colibri-eval-v3.dts
View file @ 8a20a04b
/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
......
arch/arm/boot/dts/vf610-colibri.dtsi
View file @ 8a20a04b
/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "vf610.dtsi"
......
arch/arm/boot/dts/vf610-twr.dts
View file @ 8a20a04b
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
......@@ -96,6 +128,10 @@ &adc0 {
&clks {
clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
<&clks VF610_CLK_ENET_TS_SEL>;
assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
<&clks VF610_CLK_ENET_EXT>;
};
&dspi0 {
......
arch/arm/boot/dts/vf610.dtsi
View file @ 8a20a04b
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "vf500.dtsi"
......
arch/arm/boot/dts/vfxxx.dtsi
View file @ 8a20a04b
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "vf610-pinfunc.h"
......@@ -16,6 +48,8 @@ / {
aliases {
can0 = &can0;
can1 = &can1;
ethernet0 = &fec0;
ethernet1 = &fec1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
......@@ -174,6 +208,34 @@ dspi1: dspi1@4002d000 {
status = "disabled";
};
sai0: sai@4002f000 {
compatible = "fsl,vf610-sai";
reg = <0x4002f000 0x1000>;
interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI0>,
<&clks VF610_CLK_SAI0_DIV>,
<&clks 0>, <&clks 0>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 0 17>,
<&edma0 0 16>;
status = "disabled";
};
sai1: sai@40030000 {
compatible = "fsl,vf610-sai";
reg = <0x40030000 0x1000>;
interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI1>,
<&clks VF610_CLK_SAI1_DIV>,
<&clks 0>, <&clks 0>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 0 19>,
<&edma0 0 18>;
status = "disabled";
};
sai2: sai@40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
......@@ -188,6 +250,20 @@ sai2: sai@40031000 {
status = "disabled";
};
sai3: sai@40032000 {
compatible = "fsl,vf610-sai";
reg = <0x40032000 0x1000>;
interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI3>,
<&clks VF610_CLK_SAI3_DIV>,
<&clks 0>, <&clks 0>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 9>,
<&edma0 1 8>;
status = "disabled";
};
pit: pit@40037000 {
compatible = "fsl,vf610-pit";
reg = <0x40037000 0x1000>;
......@@ -558,6 +634,24 @@ qspi1: quadspi@400c4000 {
status = "disabled";
};
dac0: dac@400cc000 {
compatible = "fsl,vf610-dac";
reg = <0x400cc000 1000>;
interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dac";
clocks = <&clks VF610_CLK_DAC0>;
status = "disabled";
};
dac1: dac@400cd000 {
compatible = "fsl,vf610-dac";
reg = <0x400cd000 1000>;
interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dac";
clocks = <&clks VF610_CLK_DAC1>;
status = "disabled";
};
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
......
arch/arm64/boot/dts/socionext/Makefile
View file @ 8a20a04b
dtb-$(CONFIG_ARCH_UNIPHIER) += uniphier-ph1-ld10-ref.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += uniphier-ph1-ld20-ref.dtb
always := $(dtb-y)
clean-files := *.dtb
arch/arm64/boot/dts/socionext/uniphier-ph1-ld10-ref.dts → arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
View file @ 8a20a04b
/*
* Device Tree Source for UniPhier PH1-LD10 Reference Board
* Device Tree Source for UniPhier PH1-LD20 Reference Board
*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
......@@ -43,12 +43,12 @@
*/
/dts-v1/;
/include/ "uniphier-ph1-ld10.dtsi"
/include/ "uniphier-ph1-ld20.dtsi"
/include/ "uniphier-support-card.dtsi"
/ {
model = "UniPhier PH1-LD10 Reference Board";
compatible = "socionext,ph1-ld10-ref", "socionext,ph1-ld10";
model = "UniPhier PH1-LD20 Reference Board";
compatible = "socionext,ph1-ld20-ref", "socionext,ph1-ld20";
memory {
device_type = "memory";
......@@ -74,14 +74,6 @@ aliases {
};
};
&extbus {
ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
&ethsc {
interrupts = <0 48 4>;
};
......
arch/arm64/boot/dts/socionext/uniphier-ph1-ld10.dtsi → arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
View file @ 8a20a04b
/*
* Device Tree Source for UniPhier PH1-LD10 SoC
* Device Tree Source for UniPhier PH1-LD20 SoC
*
* Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
......@@ -43,7 +43,7 @@
*/
/ {
compatible = "socionext,ph1-ld10";
compatible = "socionext,ph1-ld20";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
......@@ -133,12 +133,6 @@ soc {
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
extbus: extbus {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
};
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
......@@ -261,8 +255,21 @@ i2c6: i2c@58786000 {
clock-frequency = <400000>;
};
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
status = "disabled";
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
};
smpctrl@59800000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
pinctrl: pinctrl@5f801000 {
compatible = "socionext,ph1-ld10-pinctrl", "syscon";
compatible = "socionext,ph1-ld20-pinctrl", "syscon";
reg = <0x5f801000 0xe00>;
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7