Commit 8a8b836b authored by David S. Miller's avatar David S. Miller

[SPARC]: Make bitops use same spinlocks as atomics.

Recent workqueue changes basically make this a formal requirement.

Also, move atomic32.o from lib-y to obj-y since it exports symbols
to modules.
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 216da721
......@@ -83,9 +83,6 @@ extern int __divdi3(int, int);
/* Private functions with odd calling conventions. */
extern void ___atomic24_add(void);
extern void ___atomic24_sub(void);
extern void ___set_bit(void);
extern void ___clear_bit(void);
extern void ___change_bit(void);
extern void ___rw_read_enter(void);
extern void ___rw_read_try(void);
extern void ___rw_read_exit(void);
......@@ -125,11 +122,6 @@ EXPORT_SYMBOL(pfn_base);
EXPORT_SYMBOL(___atomic24_add);
EXPORT_SYMBOL(___atomic24_sub);
/* Bit operations. */
EXPORT_SYMBOL(___set_bit);
EXPORT_SYMBOL(___clear_bit);
EXPORT_SYMBOL(___change_bit);
/* Per-CPU information table */
EXPORT_PER_CPU_SYMBOL(__cpu_data);
......
......@@ -78,7 +78,6 @@ unsigned long profile_pc(struct pt_regs *regs)
extern char __copy_user_begin[], __copy_user_end[];
extern char __atomic_begin[], __atomic_end[];
extern char __bzero_begin[], __bzero_end[];
extern char __bitops_begin[], __bitops_end[];
unsigned long pc = regs->pc;
......@@ -88,9 +87,7 @@ unsigned long profile_pc(struct pt_regs *regs)
(pc >= (unsigned long) __atomic_begin &&
pc < (unsigned long) __atomic_end) ||
(pc >= (unsigned long) __bzero_begin &&
pc < (unsigned long) __bzero_end) ||
(pc >= (unsigned long) __bitops_begin &&
pc < (unsigned long) __bitops_end))
pc < (unsigned long) __bzero_end))
pc = regs->u_regs[UREG_RETPC];
return pc;
}
......
......@@ -7,7 +7,7 @@ EXTRA_AFLAGS := -ansi -DST_DIV0=0x02
lib-y := mul.o rem.o sdiv.o udiv.o umul.o urem.o ashrdi3.o memcpy.o memset.o \
strlen.o checksum.o blockops.o memscan.o memcmp.o strncmp.o \
strncpy_from_user.o divdi3.o udivdi3.o strlen_user.o \
copy_user.o locks.o atomic.o atomic32.o bitops.o \
copy_user.o locks.o atomic.o \
lshrdi3.o ashldi3.o rwsem.o muldi3.o bitext.o
obj-y += iomap.o
obj-y += iomap.o atomic32.o
......@@ -76,3 +76,42 @@ void atomic_set(atomic_t *v, int i)
spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
}
EXPORT_SYMBOL(atomic_set);
unsigned long ___set_bit(unsigned long *addr, unsigned long mask)
{
unsigned long old, flags;
spin_lock_irqsave(ATOMIC_HASH(addr), flags);
old = *addr;
*addr = old | mask;
spin_unlock_irqrestore(ATOMIC_HASH(addr), flags);
return old & mask;
}
EXPORT_SYMBOL(___set_bit);
unsigned long ___clear_bit(unsigned long *addr, unsigned long mask)
{
unsigned long old, flags;
spin_lock_irqsave(ATOMIC_HASH(addr), flags);
old = *addr;
*addr = old & ~mask;
spin_unlock_irqrestore(ATOMIC_HASH(addr), flags);
return old & mask;
}
EXPORT_SYMBOL(___clear_bit);
unsigned long ___change_bit(unsigned long *addr, unsigned long mask)
{
unsigned long old, flags;
spin_lock_irqsave(ATOMIC_HASH(addr), flags);
old = *addr;
*addr = old ^ mask;
spin_unlock_irqrestore(ATOMIC_HASH(addr), flags);
return old & mask;
}
EXPORT_SYMBOL(___change_bit);
/* bitops.S: Low level assembler bit operations.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
*/
#include <asm/ptrace.h>
#include <asm/psr.h>
.text
.align 4
.globl __bitops_begin
__bitops_begin:
/* Take bits in %g2 and set them in word at %g1,
* return whether bits were set in original value
* in %g2. %g4 holds value to restore into %o7
* in delay slot of jmpl return, %g3 + %g5 + %g7 can be
* used as temporaries and thus is considered clobbered
* by all callers.
*/
.globl ___set_bit
___set_bit:
rd %psr, %g3
nop; nop; nop;
or %g3, PSR_PIL, %g5
wr %g5, 0x0, %psr
nop; nop; nop
#ifdef CONFIG_SMP
set bitops_spinlock, %g5
2: ldstub [%g5], %g7 ! Spin on the byte lock for SMP.
orcc %g7, 0x0, %g0 ! Did we get it?
bne 2b ! Nope...
#endif
ld [%g1], %g7
or %g7, %g2, %g5
and %g7, %g2, %g2
#ifdef CONFIG_SMP
st %g5, [%g1]
set bitops_spinlock, %g5
stb %g0, [%g5]
#else
st %g5, [%g1]
#endif
wr %g3, 0x0, %psr
nop; nop; nop
jmpl %o7, %g0
mov %g4, %o7
/* Same as above, but clears the bits from %g2 instead. */
.globl ___clear_bit
___clear_bit:
rd %psr, %g3
nop; nop; nop
or %g3, PSR_PIL, %g5
wr %g5, 0x0, %psr
nop; nop; nop
#ifdef CONFIG_SMP
set bitops_spinlock, %g5
2: ldstub [%g5], %g7 ! Spin on the byte lock for SMP.
orcc %g7, 0x0, %g0 ! Did we get it?
bne 2b ! Nope...
#endif
ld [%g1], %g7
andn %g7, %g2, %g5
and %g7, %g2, %g2
#ifdef CONFIG_SMP
st %g5, [%g1]
set bitops_spinlock, %g5
stb %g0, [%g5]
#else
st %g5, [%g1]
#endif
wr %g3, 0x0, %psr
nop; nop; nop
jmpl %o7, %g0
mov %g4, %o7
/* Same thing again, but this time toggles the bits from %g2. */
.globl ___change_bit
___change_bit:
rd %psr, %g3
nop; nop; nop
or %g3, PSR_PIL, %g5
wr %g5, 0x0, %psr
nop; nop; nop
#ifdef CONFIG_SMP
set bitops_spinlock, %g5
2: ldstub [%g5], %g7 ! Spin on the byte lock for SMP.
orcc %g7, 0x0, %g0 ! Did we get it?
bne 2b ! Nope...
#endif
ld [%g1], %g7
xor %g7, %g2, %g5
and %g7, %g2, %g2
#ifdef CONFIG_SMP
st %g5, [%g1]
set bitops_spinlock, %g5
stb %g0, [%g5]
#else
st %g5, [%g1]
#endif
wr %g3, 0x0, %psr
nop; nop; nop
jmpl %o7, %g0
mov %g4, %o7
.globl __bitops_end
__bitops_end:
......@@ -14,6 +14,10 @@
#ifdef __KERNEL__
extern unsigned long ___set_bit(unsigned long *addr, unsigned long mask);
extern unsigned long ___clear_bit(unsigned long *addr, unsigned long mask);
extern unsigned long ___change_bit(unsigned long *addr, unsigned long mask);
/*
* Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0'
* is in the highest of the four bytes and bit '31' is the high bit
......@@ -22,134 +26,62 @@
*/
static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
{
register unsigned long mask asm("g2");
register unsigned long *ADDR asm("g1");
register int tmp1 asm("g3");
register int tmp2 asm("g4");
register int tmp3 asm("g5");
register int tmp4 asm("g7");
unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
__asm__ __volatile__(
"mov %%o7, %%g4\n\t"
"call ___set_bit\n\t"
" add %%o7, 8, %%o7\n"
: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
: "0" (mask), "r" (ADDR)
: "memory", "cc");
return mask != 0;
return ___set_bit(ADDR, mask) != 0;
}
static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
{
register unsigned long mask asm("g2");
register unsigned long *ADDR asm("g1");
register int tmp1 asm("g3");
register int tmp2 asm("g4");
register int tmp3 asm("g5");
register int tmp4 asm("g7");
unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
__asm__ __volatile__(
"mov %%o7, %%g4\n\t"
"call ___set_bit\n\t"
" add %%o7, 8, %%o7\n"
: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
: "0" (mask), "r" (ADDR)
: "memory", "cc");
(void) ___set_bit(ADDR, mask);
}
static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
{
register unsigned long mask asm("g2");
register unsigned long *ADDR asm("g1");
register int tmp1 asm("g3");
register int tmp2 asm("g4");
register int tmp3 asm("g5");
register int tmp4 asm("g7");
unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
__asm__ __volatile__(
"mov %%o7, %%g4\n\t"
"call ___clear_bit\n\t"
" add %%o7, 8, %%o7\n"
: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
: "0" (mask), "r" (ADDR)
: "memory", "cc");
return mask != 0;
return ___clear_bit(ADDR, mask) != 0;
}
static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
{
register unsigned long mask asm("g2");
register unsigned long *ADDR asm("g1");
register int tmp1 asm("g3");
register int tmp2 asm("g4");
register int tmp3 asm("g5");
register int tmp4 asm("g7");
unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
__asm__ __volatile__(
"mov %%o7, %%g4\n\t"
"call ___clear_bit\n\t"
" add %%o7, 8, %%o7\n"
: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
: "0" (mask), "r" (ADDR)
: "memory", "cc");
(void) ___clear_bit(ADDR, mask);
}
static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
{
register unsigned long mask asm("g2");
register unsigned long *ADDR asm("g1");
register int tmp1 asm("g3");
register int tmp2 asm("g4");
register int tmp3 asm("g5");
register int tmp4 asm("g7");
unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
__asm__ __volatile__(
"mov %%o7, %%g4\n\t"
"call ___change_bit\n\t"
" add %%o7, 8, %%o7\n"
: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
: "0" (mask), "r" (ADDR)
: "memory", "cc");
return mask != 0;
return ___change_bit(ADDR, mask) != 0;
}
static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
{
register unsigned long mask asm("g2");
register unsigned long *ADDR asm("g1");
register int tmp1 asm("g3");
register int tmp2 asm("g4");
register int tmp3 asm("g5");
register int tmp4 asm("g7");
unsigned long *ADDR, mask;
ADDR = ((unsigned long *) addr) + (nr >> 5);
mask = 1 << (nr & 31);
__asm__ __volatile__(
"mov %%o7, %%g4\n\t"
"call ___change_bit\n\t"
" add %%o7, 8, %%o7\n"
: "=&r" (mask), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3), "=r" (tmp4)
: "0" (mask), "r" (ADDR)
: "memory", "cc");
(void) ___change_bit(ADDR, mask);
}
#include <asm-generic/bitops/non-atomic.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment