Skip to content

L
linux
Commit 8bb7e27b authored by Linus Walleij's avatar Linus Walleij Committed by Greg Kroah-Hartman
Browse files
Options

staging: delete STE RMI4 hackish driver 

As of commit 62d5bdf9
"Merge branch 'synaptics-rmi4' into next" the input subsystem
has a proper RMI4 infrastructure and touchscreen driver.
The ST Ux500 platform has been converted to use the new driver
and its devicetree bindings. Delete this ancient hack.

Cc: Andrew Duggan <aduggan@synaptics.com>
Cc: Christopher Heiny <cheiny@synaptics.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Acked-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent ccbc2a9e
Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 1206 deletions
drivers/staging/Kconfig
View file @ 8bb7e27b
......@@ -60,8 +60,6 @@ source "drivers/staging/emxx_udc/Kconfig"
source "drivers/staging/speakup/Kconfig"
source "drivers/staging/ste_rmi4/Kconfig"
source "drivers/staging/nvec/Kconfig"
source "drivers/staging/media/Kconfig"
......
drivers/staging/Makefile
View file @ 8bb7e27b
......@@ -21,7 +21,6 @@ obj-$(CONFIG_FB_SM750) += sm750fb/
obj-$(CONFIG_FB_XGI) += xgifb/
obj-$(CONFIG_USB_EMXX) += emxx_udc/
obj-$(CONFIG_SPEAKUP) += speakup/
obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += ste_rmi4/
obj-$(CONFIG_MFD_NVEC) += nvec/
obj-$(CONFIG_STAGING_RDMA) += rdma/
obj-$(CONFIG_ANDROID) += android/
......
drivers/staging/ste_rmi4/Kconfig deleted 100644 → 0
View file @ ccbc2a9e
config TOUCHSCREEN_SYNAPTICS_I2C_RMI4
tristate "Synaptics i2c rmi4 touchscreen"
depends on I2C && INPUT
help
Say Y here if you have a Synaptics RMI4 and
want to enable support for the built-in touchscreen.
To compile this driver as a module, choose M here: the
module will be called synaptics_rmi4_ts.
drivers/staging/ste_rmi4/Makefile deleted 100644 → 0
View file @ ccbc2a9e
#
# Makefile for the RMI4 touchscreen driver.
#
obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4) += synaptics_i2c_rmi4.o
drivers/staging/ste_rmi4/TODO deleted 100644 → 0
View file @ ccbc2a9e
TODO
----
Wait for the official upstream synaptics rmi4 clearpad drivers as promised over the past few months
Merge any device support needed from this driver into it
Delete this driver
drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c deleted 100644 → 0
View file @ ccbc2a9e
/**
*
* Synaptics Register Mapped Interface (RMI4) I2C Physical Layer Driver.
* Copyright (c) 2007-2010, Synaptics Incorporated
*
* Author: Js HA <js.ha@stericsson.com> for ST-Ericsson
* Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
* Copyright 2010 (c) ST-Ericsson AB
*/
/*
* This file is licensed under the GPL2 license.
*
*#############################################################################
* GPL
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
*#############################################################################
*/
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
#include <linux/input/mt.h>
#include "synaptics_i2c_rmi4.h"
/* TODO: for multiple device support will need a per-device mutex */
#define DRIVER_NAME "synaptics_rmi4_i2c"
#define MAX_ERROR_REPORT 6
#define MAX_TOUCH_MAJOR 15
#define MAX_RETRY_COUNT 5
#define STD_QUERY_LEN 21
#define PAGE_LEN 2
#define DATA_BUF_LEN 32
#define BUF_LEN 37
#define QUERY_LEN 9
#define DATA_LEN 12
#define HAS_TAP 0x01
#define HAS_PALMDETECT 0x01
#define HAS_ROTATE 0x02
#define HAS_TAPANDHOLD 0x02
#define HAS_DOUBLETAP 0x04
#define HAS_EARLYTAP 0x08
#define HAS_RELEASE 0x08
#define HAS_FLICK 0x10
#define HAS_PRESS 0x20
#define HAS_PINCH 0x40
#define MASK_16BIT 0xFFFF
#define MASK_8BIT 0xFF
#define MASK_7BIT 0x7F
#define MASK_5BIT 0x1F
#define MASK_4BIT 0x0F
#define MASK_3BIT 0x07
#define MASK_2BIT 0x03
#define TOUCHPAD_CTRL_INTR 0x8
#define PDT_START_SCAN_LOCATION (0x00E9)
#define PDT_END_SCAN_LOCATION (0x000A)
#define PDT_ENTRY_SIZE (0x0006)
#define SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM (0x11)
#define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM (0x01)
/**
* struct synaptics_rmi4_fn_desc - contains the function descriptor information
* @query_base_addr: base address for query
* @cmd_base_addr: base address for command
* @ctrl_base_addr: base address for control
* @data_base_addr: base address for data
* @intr_src_count: count for the interrupt source
* @fn_number: function number
*
* This structure is used to gives the function descriptor information
* of the particular functionality.
*/
struct synaptics_rmi4_fn_desc {
unsigned char query_base_addr;
unsigned char cmd_base_addr;
unsigned char ctrl_base_addr;
unsigned char data_base_addr;
unsigned char intr_src_count;
unsigned char fn_number;
};
/**
* struct synaptics_rmi4_fn - contains the function information
* @fn_number: function number
* @num_of_data_sources: number of data sources
* @num_of_data_points: number of fingers touched
* @size_of_data_register_block: data register block size
* @index_to_intr_reg: index for interrupt register
* @intr_mask: interrupt mask value
* @fn_desc: variable for function descriptor structure
* @link: linked list for function descriptors
*
* This structure gives information about the number of data sources and
* the number of data registers associated with the function.
*/
struct synaptics_rmi4_fn {
unsigned char fn_number;
unsigned char num_of_data_sources;
unsigned char num_of_data_points;
unsigned char size_of_data_register_block;
unsigned char index_to_intr_reg;
unsigned char intr_mask;
struct synaptics_rmi4_fn_desc fn_desc;
struct list_head link;
};
/**
* struct synaptics_rmi4_device_info - contains the rmi4 device information
* @version_major: protocol major version number
* @version_minor: protocol minor version number
* @manufacturer_id: manufacturer identification byte
* @product_props: product properties information
* @product_info: product info array
* @date_code: device manufacture date
* @tester_id: tester id array
* @serial_number: serial number for that device
* @product_id_string: product id for the device
* @support_fn_list: linked list for device information
*
* This structure gives information about the number of data sources and
* the number of data registers associated with the function.
*/
struct synaptics_rmi4_device_info {
unsigned int version_major;
unsigned int version_minor;
unsigned char manufacturer_id;
unsigned char product_props;
unsigned char product_info[2];
unsigned char date_code[3];
unsigned short tester_id;
unsigned short serial_number;
unsigned char product_id_string[11];
struct list_head support_fn_list;
};
/**
* struct synaptics_rmi4_data - contains the rmi4 device data
* @rmi4_mod_info: structure variable for rmi4 device info
* @input_dev: pointer for input device
* @i2c_client: pointer for i2c client
* @board: constant pointer for touch platform data
* @fn_list_mutex: mutex for function list
* @rmi4_page_mutex: mutex for rmi4 page
* @current_page: variable for integer
* @number_of_interrupt_register: interrupt registers count
* @fn01_ctrl_base_addr: control base address for fn01
* @fn01_query_base_addr: query base address for fn01
* @fn01_data_base_addr: data base address for fn01
* @sensor_max_x: sensor maximum x value
* @sensor_max_y: sensor maximum y value
* @regulator: pointer to the regulator structure
* @wait: wait queue structure variable
* @touch_stopped: flag to stop the thread function
* @fingers_supported: maximum supported fingers
*
* This structure gives the device data information.
*/
struct synaptics_rmi4_data {
struct synaptics_rmi4_device_info rmi4_mod_info;
struct input_dev *input_dev;
struct i2c_client *i2c_client;
const struct synaptics_rmi4_platform_data *board;
struct mutex fn_list_mutex;
struct mutex rmi4_page_mutex;
int current_page;
unsigned int number_of_interrupt_register;
unsigned short fn01_ctrl_base_addr;
unsigned short fn01_query_base_addr;
unsigned short fn01_data_base_addr;
int sensor_max_x;
int sensor_max_y;
struct regulator *regulator;
wait_queue_head_t wait;
bool touch_stopped;
unsigned char fingers_supported;
};
/**
* synaptics_rmi4_set_page() - sets the page
* @pdata: pointer to synaptics_rmi4_data structure
* @address: set the address of the page
*
* This function is used to set the page and returns integer.
*/
static int synaptics_rmi4_set_page(struct synaptics_rmi4_data *pdata,
unsigned int address)
{
unsigned char txbuf[PAGE_LEN];
int retval;
unsigned int page;
struct i2c_client *i2c = pdata->i2c_client;
page = ((address >> 8) & MASK_8BIT);
if (page != pdata->current_page) {
txbuf[0] = MASK_8BIT;
txbuf[1] = page;
retval = i2c_master_send(i2c, txbuf, PAGE_LEN);
if (retval != PAGE_LEN)
dev_err(&i2c->dev, "failed:%d\n", retval);
else
pdata->current_page = page;
} else
retval = PAGE_LEN;
return retval;
}
/**
* synaptics_rmi4_i2c_block_read() - read the block of data
* @pdata: pointer to synaptics_rmi4_data structure
* @address: read the block of data from this offset
* @valp: pointer to a buffer containing the data to be read
* @size: number of bytes to read
*
* This function is to read the block of data and returns integer.
*/
static int synaptics_rmi4_i2c_block_read(struct synaptics_rmi4_data *pdata,
unsigned short address,
unsigned char *valp, int size)
{
int retval = 0;
int retry_count = 0;
int index;
struct i2c_client *i2c = pdata->i2c_client;
mutex_lock(&(pdata->rmi4_page_mutex));
retval = synaptics_rmi4_set_page(pdata, address);
if (retval != PAGE_LEN)
goto exit;
index = address & MASK_8BIT;
retry:
retval = i2c_smbus_read_i2c_block_data(i2c, index, size, valp);
if (retval != size) {
if (++retry_count == MAX_RETRY_COUNT)
dev_err(&i2c->dev,
"%s:address 0x%04x size %d failed:%d\n",
__func__, address, size, retval);
else {
synaptics_rmi4_set_page(pdata, address);
goto retry;
}
}
exit:
mutex_unlock(&(pdata->rmi4_page_mutex));
return retval;
}
/**
* synaptics_rmi4_i2c_byte_write() - write the single byte data
* @pdata: pointer to synaptics_rmi4_data structure
* @address: write the block of data from this offset
* @data: data to be write
*
* This function is to write the single byte data and returns integer.
*/
static int synaptics_rmi4_i2c_byte_write(struct synaptics_rmi4_data *pdata,
unsigned short address,
unsigned char data)
{
unsigned char txbuf[2];
int retval = 0;
struct i2c_client *i2c = pdata->i2c_client;
/* Can't have anyone else changing the page behind our backs */
mutex_lock(&(pdata->rmi4_page_mutex));
retval = synaptics_rmi4_set_page(pdata, address);
if (retval != PAGE_LEN)
goto exit;
txbuf[0] = address & MASK_8BIT;
txbuf[1] = data;
retval = i2c_master_send(pdata->i2c_client, txbuf, 2);
/* Add in retry on writes only in certain error return values */
if (retval != 2) {
dev_err(&i2c->dev, "failed:%d\n", retval);
retval = -EIO;
} else
retval = 1;
exit:
mutex_unlock(&(pdata->rmi4_page_mutex));
return retval;
}
/**
* synpatics_rmi4_touchpad_report() - reports for the rmi4 touchpad device
* @pdata: pointer to synaptics_rmi4_data structure
* @rfi: pointer to synaptics_rmi4_fn structure
*
* This function calls to reports for the rmi4 touchpad device
*/
static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
struct synaptics_rmi4_fn *rfi)
{
/* number of touch points - fingers down in this case */
int touch_count = 0;
int finger;
int finger_registers;
int reg;
int finger_shift;
int finger_status;
int retval;
int x, y;
int wx, wy;
unsigned short data_base_addr;
unsigned short data_offset;
unsigned char data_reg_blk_size;
unsigned char values[2];
unsigned char data[DATA_LEN];
unsigned char fingers_supported = pdata->fingers_supported;
struct i2c_client *client = pdata->i2c_client;
struct input_dev *input_dev = pdata->input_dev;
/* get 2D sensor finger data */
/*
* First get the finger status field - the size of the finger status
* field is determined by the number of finger supporte - 2 bits per
* finger, so the number of registers to read is:
* registerCount = ceil(numberOfFingers/4).
* Read the required number of registers and check each 2 bit field to
* determine if a finger is down:
* 00 = finger not present,
* 01 = finger present and data accurate,
* 10 = finger present but data may not be accurate,
* 11 = reserved for product use.
*/
finger_registers = (fingers_supported + 3) / 4;
data_base_addr = rfi->fn_desc.data_base_addr;
retval = synaptics_rmi4_i2c_block_read(pdata, data_base_addr, values,
finger_registers);
if (retval != finger_registers) {
dev_err(&client->dev, "%s:read status registers failed\n",
__func__);
return 0;
}
/*
* For each finger present, read the proper number of registers
* to get absolute data.
*/
data_reg_blk_size = rfi->size_of_data_register_block;
for (finger = 0; finger < fingers_supported; finger++) {
/* determine which data byte the finger status is in */
reg = finger / 4;
/* bit shift to get finger's status */
finger_shift = (finger % 4) * 2;
finger_status = (values[reg] >> finger_shift) & 3;
/*
* if finger status indicates a finger is present then
* read the finger data and report it
*/
input_mt_slot(input_dev, finger);
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
finger_status != 0);
if (finger_status) {
/* Read the finger data */
data_offset = data_base_addr +
((finger * data_reg_blk_size) +
finger_registers);
retval = synaptics_rmi4_i2c_block_read(pdata,
data_offset, data,
data_reg_blk_size);
if (retval != data_reg_blk_size) {
dev_err(&client->dev, "%s:read data failed\n",
__func__);
return 0;
}
x = (data[0] << 4) | (data[2] & MASK_4BIT);
y = (data[1] << 4) | ((data[2] >> 4) & MASK_4BIT);
wy = (data[3] >> 4) & MASK_4BIT;
wx = (data[3] & MASK_4BIT);
if (pdata->board->x_flip)
x = pdata->sensor_max_x - x;
if (pdata->board->y_flip)
y = pdata->sensor_max_y - y;
input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
max(wx, wy));
input_report_abs(input_dev, ABS_MT_POSITION_X, x);
input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
/* number of active touch points */
touch_count++;
}
}
/* sync after groups of events */
input_mt_sync_frame(input_dev);
input_sync(input_dev);
/* return the number of touch points */
return touch_count;
}
/**
* synaptics_rmi4_report_device() - reports the rmi4 device
* @pdata: pointer to synaptics_rmi4_data structure
* @rfi: pointer to synaptics_rmi4_fn
*
* This function is used to call the report function of the rmi4 device.
*/
static int synaptics_rmi4_report_device(struct synaptics_rmi4_data *pdata,
struct synaptics_rmi4_fn *rfi)
{
int touch = 0;
struct i2c_client *client = pdata->i2c_client;
static int num_error_reports;
if (rfi->fn_number != SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM) {
num_error_reports++;
if (num_error_reports < MAX_ERROR_REPORT)
dev_err(&client->dev, "%s:report not supported\n",
__func__);
} else
touch = synpatics_rmi4_touchpad_report(pdata, rfi);
return touch;
}
/**
* synaptics_rmi4_sensor_report() - reports to input subsystem
* @pdata: pointer to synaptics_rmi4_data structure
*
* This function is used to reads in all data sources and reports
* them to the input subsystem.
*/
static int synaptics_rmi4_sensor_report(struct synaptics_rmi4_data *pdata)
{
unsigned char intr_status[4];
/* number of touch points - fingers or buttons */
int touch = 0;
unsigned int retval;
struct synaptics_rmi4_fn *rfi;
struct synaptics_rmi4_device_info *rmi;
struct i2c_client *client = pdata->i2c_client;
/*
* Get the interrupt status from the function $01
* control register+1 to find which source(s) were interrupting
* so we can read the data from the source(s) (2D sensor, buttons..)
*/
retval = synaptics_rmi4_i2c_block_read(pdata,
pdata->fn01_data_base_addr + 1,
intr_status,
pdata->number_of_interrupt_register);
if (retval != pdata->number_of_interrupt_register) {
dev_err(&client->dev,
"could not read interrupt status registers\n");
return 0;
}
/*
* check each function that has data sources and if the interrupt for
* that triggered then call that RMI4 functions report() function to
* gather data and report it to the input subsystem
*/
rmi = &(pdata->rmi4_mod_info);
list_for_each_entry(rfi, &rmi->support_fn_list, link) {
if (rfi->num_of_data_sources) {
if (intr_status[rfi->index_to_intr_reg] &
rfi->intr_mask)
touch = synaptics_rmi4_report_device(pdata,
rfi);
}
}
/* return the number of touch points */
return touch;
}
/**
* synaptics_rmi4_irq() - thread function for rmi4 attention line
* @irq: irq value
* @data: void pointer
*
* This function is interrupt thread function. It just notifies the
* application layer that attention is required.
*/
static irqreturn_t synaptics_rmi4_irq(int irq, void *data)
{
struct synaptics_rmi4_data *pdata = data;
int touch_count;
do {
touch_count = synaptics_rmi4_sensor_report(pdata);
if (touch_count)
wait_event_timeout(pdata->wait, pdata->touch_stopped,
msecs_to_jiffies(1));
else
break;
} while (!pdata->touch_stopped);
return IRQ_HANDLED;
}
/**
* synpatics_rmi4_touchpad_detect() - detects the rmi4 touchpad device
* @pdata: pointer to synaptics_rmi4_data structure
* @rfi: pointer to synaptics_rmi4_fn structure
* @fd: pointer to synaptics_rmi4_fn_desc structure
* @interruptcount: count the number of interrupts
*
* This function calls to detects the rmi4 touchpad device
*/
static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
struct synaptics_rmi4_fn *rfi,
struct synaptics_rmi4_fn_desc *fd,
unsigned int interruptcount)
{
unsigned char queries[QUERY_LEN];
unsigned short intr_offset;
unsigned char abs_data_size;
unsigned char abs_data_blk_size;
unsigned char egr_0, egr_1;
unsigned int all_data_blk_size;
int has_pinch, has_flick, has_tap;
int has_tapandhold, has_doubletap;
int has_earlytap, has_press;
int has_palmdetect, has_rotate;
int has_rel;
int i;
int retval;
struct i2c_client *client = pdata->i2c_client;
rfi->fn_desc.query_base_addr = fd->query_base_addr;
rfi->fn_desc.data_base_addr = fd->data_base_addr;
rfi->fn_desc.intr_src_count = fd->intr_src_count;
rfi->fn_desc.fn_number = fd->fn_number;
rfi->fn_number = fd->fn_number;
rfi->num_of_data_sources = fd->intr_src_count;
rfi->fn_desc.ctrl_base_addr = fd->ctrl_base_addr;
rfi->fn_desc.cmd_base_addr = fd->cmd_base_addr;
/*
* need to get number of fingers supported, data size, etc.
* to be used when getting data since the number of registers to
* read depends on the number of fingers supported and data size.
*/
retval = synaptics_rmi4_i2c_block_read(pdata, fd->query_base_addr,
queries,
sizeof(queries));
if (retval != sizeof(queries)) {
dev_err(&client->dev, "%s:read function query registers\n",
__func__);
return retval;
}
/*
* 2D data sources have only 3 bits for the number of fingers
* supported - so the encoding is a bit weird.
*/
if ((queries[1] & MASK_3BIT) <= 4)
/* add 1 since zero based */
rfi->num_of_data_points = (queries[1] & MASK_3BIT) + 1;
else {
/*
* a value of 5 is up to 10 fingers - 6 and 7 are reserved
* (shouldn't get these i int retval;n a normal 2D source).
*/
if ((queries[1] & MASK_3BIT) == 5)
rfi->num_of_data_points = 10;
}
pdata->fingers_supported = rfi->num_of_data_points;
/* Need to get interrupt info for handling interrupts */
rfi->index_to_intr_reg = (interruptcount + 7) / 8;
if (rfi->index_to_intr_reg != 0)
rfi->index_to_intr_reg -= 1;
/*
* loop through interrupts for each source in fn $11
* and or in a bit to the interrupt mask for each.
*/
intr_offset = interruptcount % 8;
rfi->intr_mask = 0;
for (i = intr_offset;
i < ((fd->intr_src_count & MASK_3BIT) + intr_offset); i++)
rfi->intr_mask |= 1 << i;
/* Size of just the absolute data for one finger */
abs_data_size = queries[5] & MASK_2BIT;
/* One each for X and Y, one for LSB for X & Y, one for W, one for Z */
abs_data_blk_size = 3 + (2 * (abs_data_size == 0 ? 1 : 0));
rfi->size_of_data_register_block = abs_data_blk_size;
/*
* need to determine the size of data to read - this depends on
* conditions such as whether Relative data is reported and if Gesture
* data is reported.
*/
egr_0 = queries[7];
egr_1 = queries[8];
/*
* Get info about what EGR data is supported, whether it has
* Relative data supported, etc.
*/
has_pinch = egr_0 & HAS_PINCH;
has_flick = egr_0 & HAS_FLICK;
has_tap = egr_0 & HAS_TAP;
has_earlytap = egr_0 & HAS_EARLYTAP;
has_press = egr_0 & HAS_PRESS;
has_rotate = egr_1 & HAS_ROTATE;
has_rel = queries[1] & HAS_RELEASE;
has_tapandhold = egr_0 & HAS_TAPANDHOLD;
has_doubletap = egr_0 & HAS_DOUBLETAP;
has_palmdetect = egr_1 & HAS_PALMDETECT;
/*
* Size of all data including finger status, absolute data for each
* finger, relative data and EGR data
*/
all_data_blk_size =
/* finger status, four fingers per register */
((rfi->num_of_data_points + 3) / 4) +
/* absolute data, per finger times number of fingers */
(abs_data_blk_size * rfi->num_of_data_points) +
/*
* two relative registers (if relative is being reported)
*/
2 * has_rel +
/*
* F11_2D_data8 is only present if the egr_0
* register is non-zero.
*/
!!(egr_0) +
/*
* F11_2D_data9 is only present if either egr_0 or
* egr_1 registers are non-zero.
*/
(egr_0 || egr_1) +
/*
* F11_2D_data10 is only present if EGR_PINCH or EGR_FLICK of
* egr_0 reports as 1.
*/
!!(has_pinch | has_flick) +
/*
* F11_2D_data11 and F11_2D_data12 are only present if
* EGR_FLICK of egr_0 reports as 1.
*/
2 * !!(has_flick);
return retval;
}
/**
* synaptics_rmi4_touchpad_config() - configures the rmi4 touchpad device
* @pdata: pointer to synaptics_rmi4_data structure
* @rfi: pointer to synaptics_rmi4_fn structure
*
* This function calls to configures the rmi4 touchpad device
*/
static int synaptics_rmi4_touchpad_config(struct synaptics_rmi4_data *pdata,
struct synaptics_rmi4_fn *rfi)
{
/*
* For the data source - print info and do any
* source specific configuration.
*/
unsigned char data[BUF_LEN];
int retval = 0;
struct i2c_client *client = pdata->i2c_client;
/* Get and print some info about the data source... */
/* To Query 2D devices we need to read from the address obtained
* from the function descriptor stored in the RMI function info.
*/
retval = synaptics_rmi4_i2c_block_read(pdata,
rfi->fn_desc.query_base_addr,
data, QUERY_LEN);
if (retval != QUERY_LEN)
dev_err(&client->dev, "%s:read query registers failed\n",
__func__);
else {
retval = synaptics_rmi4_i2c_block_read(pdata,
rfi->fn_desc.ctrl_base_addr,
data, DATA_BUF_LEN);
if (retval != DATA_BUF_LEN) {
dev_err(&client->dev,
"%s:read control registers failed\n",
__func__);
return retval;
}
/* Store these for use later*/
pdata->sensor_max_x = ((data[6] & MASK_8BIT) << 0) |
((data[7] & MASK_4BIT) << 8);
pdata->sensor_max_y = ((data[8] & MASK_5BIT) << 0) |
((data[9] & MASK_4BIT) << 8);
}
return retval;
}
/**
* synaptics_rmi4_i2c_query_device() - query the rmi4 device
* @pdata: pointer to synaptics_rmi4_data structure
*
* This function is used to query the rmi4 device.
*/
static int synaptics_rmi4_i2c_query_device(struct synaptics_rmi4_data *pdata)
{
int i;
int retval;
unsigned char std_queries[STD_QUERY_LEN];
unsigned char intr_count = 0;
int data_sources = 0;
unsigned int ctrl_offset;
struct synaptics_rmi4_fn *rfi;
struct synaptics_rmi4_fn_desc rmi_fd;
struct synaptics_rmi4_device_info *rmi;
struct i2c_client *client = pdata->i2c_client;
/*
* init the physical drivers RMI module
* info list of functions
*/
INIT_LIST_HEAD(&pdata->rmi4_mod_info.support_fn_list);
/*
* Read the Page Descriptor Table to determine what functions
* are present
*/
for (i = PDT_START_SCAN_LOCATION; i > PDT_END_SCAN_LOCATION;
i -= PDT_ENTRY_SIZE) {
retval = synaptics_rmi4_i2c_block_read(pdata, i,
(unsigned char *)&rmi_fd,
sizeof(rmi_fd));
if (retval != sizeof(rmi_fd)) {
/* failed to read next PDT entry */
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
rfi = NULL;
if (rmi_fd.fn_number) {
switch (rmi_fd.fn_number & MASK_8BIT) {
case SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM:
pdata->fn01_query_base_addr =
rmi_fd.query_base_addr;
pdata->fn01_ctrl_base_addr =
rmi_fd.ctrl_base_addr;
pdata->fn01_data_base_addr =
rmi_fd.data_base_addr;
break;
case SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM:
if (rmi_fd.intr_src_count) {
rfi = kmalloc(sizeof(*rfi),
GFP_KERNEL);
if (!rfi)
return -ENOMEM;
retval = synpatics_rmi4_touchpad_detect
(pdata, rfi,
&rmi_fd,
intr_count);
if (retval < 0) {
kfree(rfi);
return retval;
}
}
break;
}
/* interrupt count for next iteration */
intr_count += (rmi_fd.intr_src_count & MASK_3BIT);
/*
* We only want to add functions to the list
* that have data associated with them.
*/
if (rfi && rmi_fd.intr_src_count) {
/* link this function info to the RMI module */
mutex_lock(&(pdata->fn_list_mutex));
list_add_tail(&rfi->link,
&pdata->rmi4_mod_info.support_fn_list);
mutex_unlock(&(pdata->fn_list_mutex));
}
} else {
/*
* A zero in the function number
* signals the end of the PDT
*/
dev_dbg(&client->dev,
"%s:end of PDT\n", __func__);
break;
}
}
/*
* calculate the interrupt register count - used in the
* ISR to read the correct number of interrupt registers
*/
pdata->number_of_interrupt_register = (intr_count + 7) / 8;
/*
* Function $01 will be used to query the product properties,
* and product ID so we had to read the PDT above first to get
* the Fn $01 query address and prior to filling in the product
* info. NOTE: Even an unflashed device will still have FN $01.
*/
/* Load up the standard queries and get the RMI4 module info */
retval = synaptics_rmi4_i2c_block_read(pdata,
pdata->fn01_query_base_addr,
std_queries,
sizeof(std_queries));
if (retval != sizeof(std_queries)) {
dev_err(&client->dev, "%s:Failed reading queries\n",
__func__);
return -EIO;
}
/* Currently supported RMI version is 4.0 */
pdata->rmi4_mod_info.version_major = 4;
pdata->rmi4_mod_info.version_minor = 0;
/*
* get manufacturer id, product_props, product info,
* date code, tester id, serial num and product id (name)
*/
pdata->rmi4_mod_info.manufacturer_id = std_queries[0];
pdata->rmi4_mod_info.product_props = std_queries[1];
pdata->rmi4_mod_info.product_info[0] = std_queries[2];
pdata->rmi4_mod_info.product_info[1] = std_queries[3];
/* year - 2001-2032 */
pdata->rmi4_mod_info.date_code[0] = std_queries[4] & MASK_5BIT;
/* month - 1-12 */
pdata->rmi4_mod_info.date_code[1] = std_queries[5] & MASK_4BIT;
/* day - 1-31 */
pdata->rmi4_mod_info.date_code[2] = std_queries[6] & MASK_5BIT;
pdata->rmi4_mod_info.tester_id = ((std_queries[7] & MASK_7BIT) << 8) |
(std_queries[8] & MASK_7BIT);
pdata->rmi4_mod_info.serial_number =
((std_queries[9] & MASK_7BIT) << 8) |
(std_queries[10] & MASK_7BIT);
memcpy(pdata->rmi4_mod_info.product_id_string, &std_queries[11], 10);
/* Check if this is a Synaptics device - report if not. */
if (pdata->rmi4_mod_info.manufacturer_id != 1)
dev_err(&client->dev, "non-Synaptics mfg id:%d\n",
pdata->rmi4_mod_info.manufacturer_id);
list_for_each_entry(rfi, &pdata->rmi4_mod_info.support_fn_list, link)
data_sources += rfi->num_of_data_sources;
if (data_sources) {
rmi = &(pdata->rmi4_mod_info);
list_for_each_entry(rfi, &rmi->support_fn_list, link) {
if (rfi->num_of_data_sources) {
if (rfi->fn_number ==
SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM) {
retval = synaptics_rmi4_touchpad_config
(pdata, rfi);
if (retval < 0)
return retval;
} else
dev_err(&client->dev,
"%s:fn_number not supported\n",
__func__);
/*
* Turn on interrupts for this
* function's data sources.
*/
ctrl_offset = pdata->fn01_ctrl_base_addr + 1 +
rfi->index_to_intr_reg;
retval = synaptics_rmi4_i2c_byte_write(pdata,
ctrl_offset,
rfi->intr_mask);
if (retval < 0)
return retval;
}
}
}
return 0;
}
/*
* Descriptor structure.
* Describes the number of i2c devices on the bus that speak RMI.
*/
static const struct synaptics_rmi4_platform_data synaptics_rmi4_platformdata = {
.irq_type = (IRQF_TRIGGER_FALLING | IRQF_SHARED),
.x_flip = false,
.y_flip = true,
};
/**
* synaptics_rmi4_probe() - Initialze the i2c-client touchscreen driver
* @i2c: i2c client structure pointer
* @id:i2c device id pointer
*
* This function will allocate and initialize the instance
* data and request the irq and set the instance data as the clients
* platform data then register the physical driver which will do a scan of
* the rmi4 Physical Device Table and enumerate any rmi4 functions that
* have data sources associated with them.
*/
static int synaptics_rmi4_probe
(struct i2c_client *client, const struct i2c_device_id *dev_id)
{
int retval;
unsigned char intr_status[4];
struct synaptics_rmi4_data *rmi4_data;
const struct synaptics_rmi4_platform_data *platformdata =
client->dev.platform_data;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "i2c smbus byte data not supported\n");
return -EIO;
}
if (!platformdata)
platformdata = &synaptics_rmi4_platformdata;
/* Allocate and initialize the instance data for this client */
rmi4_data = kcalloc(2, sizeof(struct synaptics_rmi4_data),
GFP_KERNEL);
if (!rmi4_data)
return -ENOMEM;
rmi4_data->input_dev = input_allocate_device();
if (!rmi4_data->input_dev) {
retval = -ENOMEM;
goto err_input;
}
rmi4_data->regulator = regulator_get(&client->dev, "vdd");
if (IS_ERR(rmi4_data->regulator)) {
dev_err(&client->dev, "%s:get regulator failed\n",
__func__);
retval = PTR_ERR(rmi4_data->regulator);
goto err_get_regulator;
}
retval = regulator_enable(rmi4_data->regulator);
if (retval < 0) {
dev_err(&client->dev, "%s:regulator enable failed\n",
__func__);
goto err_regulator_enable;
}
init_waitqueue_head(&rmi4_data->wait);
/*
* Copy i2c_client pointer into RTID's i2c_client pointer for
* later use in rmi4_read, rmi4_write, etc.
*/
rmi4_data->i2c_client = client;
/* So we set the page correctly the first time */
rmi4_data->current_page = MASK_16BIT;
rmi4_data->board = platformdata;
rmi4_data->touch_stopped = false;
/* init the mutexes for maintain the lists */
mutex_init(&(rmi4_data->fn_list_mutex));
mutex_init(&(rmi4_data->rmi4_page_mutex));
/*
* Register physical driver - this will call the detect function that
* will then scan the device and determine the supported
* rmi4 functions.
*/
retval = synaptics_rmi4_i2c_query_device(rmi4_data);
if (retval) {
dev_err(&client->dev, "%s: rmi4 query device failed\n",
__func__);
goto err_query_dev;
}
/* Store the instance data in the i2c_client */
i2c_set_clientdata(client, rmi4_data);
/*initialize the input device parameters */
rmi4_data->input_dev->name = DRIVER_NAME;
rmi4_data->input_dev->phys = "Synaptics_Clearpad";
rmi4_data->input_dev->id.bustype = BUS_I2C;
rmi4_data->input_dev->dev.parent = &client->dev;
input_set_drvdata(rmi4_data->input_dev, rmi4_data);
/* Initialize the function handlers for rmi4 */
set_bit(EV_SYN, rmi4_data->input_dev->evbit);
set_bit(EV_KEY, rmi4_data->input_dev->evbit);
set_bit(EV_ABS, rmi4_data->input_dev->evbit);
input_set_abs_params(rmi4_data->input_dev, ABS_MT_POSITION_X, 0,
rmi4_data->sensor_max_x, 0, 0);
input_set_abs_params(rmi4_data->input_dev, ABS_MT_POSITION_Y, 0,
rmi4_data->sensor_max_y, 0, 0);
input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
MAX_TOUCH_MAJOR, 0, 0);
input_mt_init_slots(rmi4_data->input_dev,
rmi4_data->fingers_supported, 0);
/* Clear interrupts */
synaptics_rmi4_i2c_block_read(rmi4_data,
rmi4_data->fn01_data_base_addr + 1, intr_status,
rmi4_data->number_of_interrupt_register);
retval = request_threaded_irq(client->irq, NULL,
synaptics_rmi4_irq,
platformdata->irq_type,
DRIVER_NAME, rmi4_data);
if (retval) {
dev_err(&client->dev, "Unable to get attn irq %d\n",
client->irq);
goto err_query_dev;
}
retval = input_register_device(rmi4_data->input_dev);
if (retval) {
dev_err(&client->dev, "%s:input register failed\n", __func__);
goto err_free_irq;
}
return retval;
err_free_irq:
free_irq(client->irq, rmi4_data);
err_query_dev:
regulator_disable(rmi4_data->regulator);
err_regulator_enable:
regulator_put(rmi4_data->regulator);
err_get_regulator:
input_free_device(rmi4_data->input_dev);
rmi4_data->input_dev = NULL;
err_input:
kfree(rmi4_data);
return retval;
}
/**
* synaptics_rmi4_remove() - Removes the i2c-client touchscreen driver
* @client: i2c client structure pointer
*
* This function uses to remove the i2c-client
* touchscreen driver and returns integer.
*/
static int synaptics_rmi4_remove(struct i2c_client *client)
{
struct synaptics_rmi4_data *rmi4_data = i2c_get_clientdata(client);
rmi4_data->touch_stopped = true;
wake_up(&rmi4_data->wait);
free_irq(client->irq, rmi4_data);
input_unregister_device(rmi4_data->input_dev);
regulator_disable(rmi4_data->regulator);
regulator_put(rmi4_data->regulator);
kfree(rmi4_data);
return 0;
}
/**
* synaptics_rmi4_suspend() - suspend the touch screen controller
* @dev: pointer to device structure
*
* This function is used to suspend the
* touch panel controller and returns integer
*/
static int __maybe_unused synaptics_rmi4_suspend(struct device *dev)
{
/* Touch sleep mode */
int retval;
unsigned char intr_status;
struct synaptics_rmi4_data *rmi4_data = dev_get_drvdata(dev);
rmi4_data->touch_stopped = true;
disable_irq(rmi4_data->i2c_client->irq);
retval = synaptics_rmi4_i2c_block_read(rmi4_data,
rmi4_data->fn01_data_base_addr + 1,
&intr_status,
rmi4_data->number_of_interrupt_register);
if (retval < 0)
return retval;
retval = synaptics_rmi4_i2c_byte_write(rmi4_data,
rmi4_data->fn01_ctrl_base_addr + 1,
(intr_status & ~TOUCHPAD_CTRL_INTR));
if (retval < 0)
return retval;
regulator_disable(rmi4_data->regulator);
return 0;
}
/**
* synaptics_rmi4_resume() - resume the touch screen controller
* @dev: pointer to device structure
*
* This function is used to resume the touch panel
* controller and returns integer.
*/
static int __maybe_unused synaptics_rmi4_resume(struct device *dev)
{
int retval;
unsigned char intr_status;
struct synaptics_rmi4_data *rmi4_data = dev_get_drvdata(dev);
retval = regulator_enable(rmi4_data->regulator);
if (retval) {
dev_err(dev, "Regulator enable failed (%d)\n", retval);
return retval;
}
enable_irq(rmi4_data->i2c_client->irq);
rmi4_data->touch_stopped = false;
retval = synaptics_rmi4_i2c_block_read(rmi4_data,
rmi4_data->fn01_data_base_addr + 1,
&intr_status,
rmi4_data->number_of_interrupt_register);
if (retval < 0)
return retval;
retval = synaptics_rmi4_i2c_byte_write(rmi4_data,
rmi4_data->fn01_ctrl_base_addr + 1,
(intr_status | TOUCHPAD_CTRL_INTR));
if (retval < 0)
return retval;
return 0;
}
static SIMPLE_DEV_PM_OPS(synaptics_rmi4_dev_pm_ops, synaptics_rmi4_suspend,
synaptics_rmi4_resume);
static const struct i2c_device_id synaptics_rmi4_id_table[] = {
{ DRIVER_NAME, 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, synaptics_rmi4_id_table);
static struct i2c_driver synaptics_rmi4_driver = {
.driver = {
.name = DRIVER_NAME,
.pm = &synaptics_rmi4_dev_pm_ops,
},
.probe = synaptics_rmi4_probe,
.remove = synaptics_rmi4_remove,
.id_table = synaptics_rmi4_id_table,
};
module_i2c_driver(synaptics_rmi4_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("naveen.gaddipati@stericsson.com, js.ha@stericsson.com");
MODULE_DESCRIPTION("synaptics rmi4 i2c touch Driver");
drivers/staging/ste_rmi4/synaptics_i2c_rmi4.h deleted 100644 → 0
View file @ ccbc2a9e
/**
*
* Synaptics Register Mapped Interface (RMI4) I2C Physical Layer Driver.
* Copyright (c) 2007-2010, Synaptics Incorporated
*
* Author: Js HA <js.ha@stericsson.com> for ST-Ericsson
* Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
* Copyright 2010 (c) ST-Ericsson AB
*/
/*
* This file is licensed under the GPL2 license.
*
*#############################################################################
* GPL
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
*#############################################################################
*/
#ifndef _SYNAPTICS_RMI4_H_INCLUDED_
#define _SYNAPTICS_RMI4_H_INCLUDED_
/**
* struct synaptics_rmi4_platform_data - contains the rmi4 platform data
* @irq_number: irq number
* @irq_type: irq type
* @x flip: x flip flag
* @y flip: y flip flag
*
* This structure gives platform data for rmi4.
*/
struct synaptics_rmi4_platform_data {
int irq_type;
bool x_flip;
bool y_flip;
};
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7