Merge tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux into arm/drivers

Reset controller changes for v5.3

This tag adds support for the Bitmain BM1880 reset controller to the
reset-simple driver and fixes a spelling mistake in the i.MX7 reset
controller binding document.

* tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux:
  dt-bindings: reset: imx7: Fix the spelling of 'indices'
  reset: Add reset controller support for BM1880 SoC
  dt-bindings: reset: Add devicetree binding for BM1880 reset controller

Link: https://lore.kernel.org/r/1562236632.6641.14.camel@pengutronix.deSigned-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt

+Bitmain BM1880 SoC Reset Controller
+===================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible:   Should be "bitmain,bm1880-reset"
+- reg:          Offset and length of reset controller space in SCTRL.
+- #reset-cells: Must be 1.
+
+Example:
+
+        rst: reset-controller@c00 {
+                compatible = "bitmain,bm1880-reset";
+                reg = <0xc00 0x8>;
+                #reset-cells = <1>;
+        };

Documentation/devicetree/bindings/reset/fsl,imx7-src.txt

@@ -45,6 +45,6 @@ Example:
         };
 
 
-For list of all valid reset indicies see
+For list of all valid reset indices see
 <dt-bindings/reset/imx7-reset.h> for i.MX7 and
 <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ

drivers/reset/Kconfig

@@ -118,7 +118,7 @@ config RESET_QCOM_PDC
 
 config RESET_SIMPLE
 	bool "Simple Reset Controller Driver" if COMPILE_TEST
-	default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED
+	default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED || ARCH_BITMAIN
 	help
 	  This enables a simple reset controller driver for reset lines that
 	  that can be asserted and deasserted by toggling bits in a contiguous,
@@ -130,6 +130,7 @@ config RESET_SIMPLE
 	   - RCC reset controller in STM32 MCUs
 	   - Allwinner SoCs
 	   - ZTE's zx2967 family
+	   - Bitmain BM1880 SoC
 
 config RESET_STM32MP157
 	bool "STM32MP157 Reset Driver" if COMPILE_TEST

drivers/reset/reset-simple.c

@@ -125,6 +125,8 @@ static const struct of_device_id reset_simple_dt_ids[] = {
 		.data = &reset_simple_active_low },
 	{ .compatible = "aspeed,ast2400-lpc-reset" },
 	{ .compatible = "aspeed,ast2500-lpc-reset" },
+	{ .compatible = "bitmain,bm1880-reset",
+		.data = &reset_simple_active_low },
 	{ /* sentinel */ },
 };
 

include/dt-bindings/reset/bitmain,bm1880-reset.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2018 Bitmain Ltd.
+ * Copyright (c) 2019 Linaro Ltd.
+ */
+
+#ifndef _DT_BINDINGS_BM1880_RESET_H
+#define _DT_BINDINGS_BM1880_RESET_H
+
+#define BM1880_RST_MAIN_AP		0
+#define BM1880_RST_SECOND_AP		1
+#define BM1880_RST_DDR			2
+#define BM1880_RST_VIDEO		3
+#define BM1880_RST_JPEG			4
+#define BM1880_RST_VPP			5
+#define BM1880_RST_GDMA			6
+#define BM1880_RST_AXI_SRAM		7
+#define BM1880_RST_TPU			8
+#define BM1880_RST_USB			9
+#define BM1880_RST_ETH0			10
+#define BM1880_RST_ETH1			11
+#define BM1880_RST_NAND			12
+#define BM1880_RST_EMMC			13
+#define BM1880_RST_SD			14
+#define BM1880_RST_SDMA			15
+#define BM1880_RST_I2S0			16
+#define BM1880_RST_I2S1			17
+#define BM1880_RST_UART0_1_CLK		18
+#define BM1880_RST_UART0_1_ACLK		19
+#define BM1880_RST_UART2_3_CLK		20
+#define BM1880_RST_UART2_3_ACLK		21
+#define BM1880_RST_MINER		22
+#define BM1880_RST_I2C0			23
+#define BM1880_RST_I2C1			24
+#define BM1880_RST_I2C2			25
+#define BM1880_RST_I2C3			26
+#define BM1880_RST_I2C4			27
+#define BM1880_RST_PWM0			28
+#define BM1880_RST_PWM1			29
+#define BM1880_RST_PWM2			30
+#define BM1880_RST_PWM3			31
+#define BM1880_RST_SPI			32
+#define BM1880_RST_GPIO0		33
+#define BM1880_RST_GPIO1		34
+#define BM1880_RST_GPIO2		35
+#define BM1880_RST_EFUSE		36
+#define BM1880_RST_WDT			37
+#define BM1880_RST_AHB_ROM		38
+#define BM1880_RST_SPIC			39
+
+#endif /* _DT_BINDINGS_BM1880_RESET_H */