Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/arm/boot/compressed/head-clps7500.S

@@ -34,7 +34,7 @@
 		mov	r0, #0x30
 		mcr	p15, 0, r0, c1, c0, 0
 		mov	r0, #0x13
-		msr	cpsr, r0
+		msr	cpsr_cxsf, r0
 		mov	r12, #0x03000000	@ point to LEDs
 		orr	r12, r12, #0x00020000
 		orr	r12, r12, #0xba00
@@ -71,7 +71,7 @@
 		/* Ensure all interrupts are off and MMU disabled */
 		mrs	r0, cpsr
 		orr	r0, r0, #0xc0
-		msr	cpsr, r0
+		msr	cpsr_cxsf, r0
 
 		adr	lr, 1b
 		orr	lr, lr, #0x10000000

arch/arm/configs/bast_defconfig

@@ -20,17 +20,24 @@ CONFIG_BROKEN_ON_SMP=y
 #
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_HOTPLUG is not set
 # CONFIG_IKCONFIG is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 
 #
 # Loadable module support
@@ -44,57 +51,32 @@ CONFIG_KMOD=y
 #
 # System Type
 #
-# CONFIG_ARCH_ADIFCC is not set
-# CONFIG_ARCH_ANAKIN is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_CAMELOT is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SHARK is not set
 CONFIG_ARCH_S3C2410=y
-
-#
-# CLPS711X/EP721X Implementations
-#
-
-#
-# Epxa10db
-#
-
-#
-# Footbridge Implementations
-#
-
-#
-# IOP3xx Implementation Options
-#
-# CONFIG_ARCH_IOP310 is not set
-# CONFIG_ARCH_IOP321 is not set
-
-#
-# IOP3xx Chipset Features
-#
-
-#
-# Intel PXA250/210 Implementations
-#
-
-#
-# SA11x0 Implementations
-#
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE_PB is not set
 
 #
 # S3C2410 Implementations
 #
 CONFIG_ARCH_BAST=y
+# CONFIG_ARCH_H1940 is not set
+# CONFIG_ARCH_SMDK2410 is not set
+CONFIG_MACH_VR1000=y
 
 #
 # Processor Type
@@ -119,9 +101,8 @@ CONFIG_CPU_TLB_V4WBI=y
 # General setup
 #
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-# CONFIG_HOTPLUG is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
 
 #
 # At least one math emulation must be selected
@@ -129,6 +110,7 @@ CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
@@ -136,9 +118,13 @@ CONFIG_BINFMT_AOUT=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
 # CONFIG_PM is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_ARTHUR is not set
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -148,7 +134,6 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_CML1=y
-# CONFIG_PARPORT_SERIAL is not set
 CONFIG_PARPORT_PC_FIFO=y
 CONFIG_PARPORT_PC_SUPERIO=y
 # CONFIG_PARPORT_ARC is not set
@@ -217,7 +202,6 @@ CONFIG_MTD_CFI_INTELEXT=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
 
 #
 # Block devices
@@ -258,23 +242,21 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
 # CONFIG_NETFILTER is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
-CONFIG_IPV6_SCTP__=y
 # CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
@@ -290,11 +272,17 @@ CONFIG_IPV6_SCTP__=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -315,40 +303,25 @@ CONFIG_NET_ETHERNET=y
 #
 # Ethernet (10000 Mbit)
 #
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Token Ring devices
 #
-# CONFIG_NET_RADIO is not set
-# CONFIG_HOSTAP is not set
 
 #
-# Token Ring devices
+# Wireless LAN (non-hamradio)
 #
-# CONFIG_SHAPER is not set
+# CONFIG_NET_RADIO is not set
 
 #
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -359,9 +332,9 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDETAPE=m
 CONFIG_BLK_DEV_IDEFLOPPY=m
@@ -371,10 +344,10 @@ CONFIG_BLK_DEV_IDEFLOPPY=m
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_BLK_DEV_IDE_BAST=y
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
-# CONFIG_DMA_NONPCI is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -382,6 +355,15 @@ CONFIG_BLK_DEV_IDE_BAST=y
 #
 # CONFIG_SCSI is not set
 
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
 #
 # I2O device support
 #
@@ -389,7 +371,7 @@ CONFIG_BLK_DEV_IDE_BAST=y
 #
 # ISDN subsystem
 #
-# CONFIG_ISDN_BOOL is not set
+# CONFIG_ISDN is not set
 
 #
 # Input device support
@@ -405,7 +387,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_TSLIBDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -415,7 +396,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_GAMEPORT is not set
 CONFIG_SOUND_GAMEPORT=y
 CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PARKBD is not set
@@ -424,14 +405,15 @@ CONFIG_SERIO_SERPORT=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_PS2_SYNAPTICS is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
@@ -478,15 +460,40 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2410_CONSOLE=y
-# CONFIG_SERIAL_DZ is not set
+# CONFIG_SERIAL_BAST_SIO is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
 # CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=y
 # CONFIG_TIPAR is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
 
 #
 # I2C support
@@ -505,55 +512,44 @@ CONFIG_I2C_ALGOBIT=m
 #
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_PHILIPSPAR is not set
+# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_SCx200_ACB is not set
 
 #
-# I2C Hardware Sensors Chip support
+# Hardware Sensors Chip support
 #
 CONFIG_I2C_SENSOR=m
 # CONFIG_SENSORS_ADM1021 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_IT87 is not set
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM78=m
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
 CONFIG_SENSORS_LM85=m
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
 
 #
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
+# Other I2C Chip support
 #
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 
 #
 # Multimedia devices
@@ -565,11 +561,6 @@ CONFIG_RTC=y
 #
 # CONFIG_DVB is not set
 
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
 #
 # File systems
 #
@@ -603,14 +594,16 @@ CONFIG_ROMFS_FS=y
 CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
 # CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
 # CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
@@ -623,6 +616,7 @@ CONFIG_RAMFS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
@@ -650,12 +644,11 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 # CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -679,16 +672,15 @@ CONFIG_BSD_DISKLABEL=y
 CONFIG_SOLARIS_X86_PARTITION=y
 # CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-CONFIG_NLS=y
 
 #
 # Native Language Support
 #
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -713,6 +705,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -728,6 +721,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
 #
 # Graphics support
 #
@@ -748,21 +746,20 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_LOGO is not set
 
 #
-# Misc devices
+# Sound
 #
+# CONFIG_SOUND is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Misc devices
 #
-# CONFIG_MCP is not set
 
 #
-# Console Switches
+# USB support
 #
-# CONFIG_SWITCHES is not set
 
 #
-# USB support
+# USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
@@ -780,7 +777,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
 CONFIG_DEBUG_S3C2410_PORT=y
 CONFIG_DEBUG_S3C2410_UART=0
 
@@ -797,6 +794,8 @@ CONFIG_DEBUG_S3C2410_UART=0
 #
 # Library routines
 #
+# CONFIG_CRC_CCITT is not set
 CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y

arch/arm/kernel/entry-armv.S

@@ -952,7 +952,7 @@ __dabt_svc:	sub	sp, sp, #S_FRAME_SIZE
 		bl	do_DataAbort
 		disable_irq r0
 		ldr	r0, [sp, #S_PSR]
-		msr	spsr, r0
+		msr	spsr_cxsf, r0
 		ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 
 		.align	5
@@ -988,7 +988,7 @@ preempt_return:
 		strne	r0, [r0, -r0]			@ bug()
 #endif
 		ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
-		msr	spsr, r0
+		msr	spsr_cxsf, r0
 		ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 
 		.ltorg
@@ -1031,7 +1031,7 @@ __und_svc:	sub	sp, sp, #S_FRAME_SIZE
 
 1:		disable_irq r0
 		ldr	lr, [sp, #S_PSR]		@ Get SVC cpsr
-		msr	spsr, lr
+		msr	spsr_cxsf, lr
 		ldmia	sp, {r0 - pc}^			@ Restore SVC registers
 
 		.align	5
@@ -1052,7 +1052,7 @@ __pabt_svc:	sub	sp, sp, #S_FRAME_SIZE
 		bl	do_PrefetchAbort		@ call abort handler
 		disable_irq r0
 		ldr	r0, [sp, #S_PSR]
-		msr	spsr, r0
+		msr	spsr_cxsf, r0
 		ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 
 		.align	5
@@ -1303,7 +1303,7 @@ vector_IRQ:	@
 		mrs	r13, cpsr
 		bic	r13, r13, #MODE_MASK
 		orr	r13, r13, #MODE_SVC
-		msr	spsr, r13			@ switch to SVC_32 mode
+		msr	spsr_cxsf, r13			@ switch to SVC_32 mode
 
 		and	lr, lr, #15
 		ldr	lr, [pc, lr, lsl #2]
@@ -1346,7 +1346,7 @@ vector_data:	@
 		mrs	r13, cpsr
 		bic	r13, r13, #MODE_MASK
 		orr	r13, r13, #MODE_SVC
-		msr	spsr, r13			@ switch to SVC_32 mode
+		msr	spsr_cxsf, r13			@ switch to SVC_32 mode
 
 		and	lr, lr, #15
 		ldr	lr, [pc, lr, lsl #2]
@@ -1390,7 +1390,7 @@ vector_prefetch:
 		mrs	r13, cpsr
 		bic	r13, r13, #MODE_MASK
 		orr	r13, r13, #MODE_SVC
-		msr	spsr, r13			@ switch to SVC_32 mode
+		msr	spsr_cxsf, r13			@ switch to SVC_32 mode
 
 		ands	lr, lr, #15
 		ldr	lr, [pc, lr, lsl #2]
@@ -1433,7 +1433,7 @@ vector_undefinstr:
 		mrs	r13, cpsr
 		bic	r13, r13, #MODE_MASK
 		orr	r13, r13, #MODE_SVC
-		msr	spsr, r13			@ switch to SVC_32 mode
+		msr	spsr_cxsf, r13			@ switch to SVC_32 mode
 
 		and	lr, lr, #15
 		ldr	lr, [pc, lr, lsl #2]

arch/arm/kernel/entry-common.S

@@ -102,7 +102,7 @@ ENTRY(ret_from_fork)
 	ldr	r0, [sp, #S_PSR]		@ Get calling cpsr
 	sub	lr, lr, #4
 	str	lr, [r8]
-	msr	spsr, r0
+	msr	spsr_cxsf, r0
 	ldmia	sp, {r0 - lr}^			@ Get calling r0 - lr
 	mov	r0, r0
 	ldr	lr, [sp, #S_PC]			@ Get PC

arch/arm/kernel/entry-header.S

@@ -99,7 +99,7 @@
 	ldr	r1, [sp, #S_PSR]		@ Get calling cpsr
 	disable_irq ip				@ disable IRQs
 	ldr	lr, [sp, #S_PC]!		@ Get PC
-	msr	spsr, r1			@ save in spsr_svc
+	msr	spsr_cxsf, r1			@ save in spsr_svc
 	ldmdb	sp, {r0 - lr}^			@ Get calling r0 - lr
 	mov	r0, r0
 	add	sp, sp, #S_FRAME_SIZE - S_PC
@@ -112,7 +112,7 @@
 	.macro	fast_restore_user_regs
 	ldr	r1, [sp, #S_OFF + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #S_OFF + S_PC]!	@ get pc
-	msr	spsr, r1			@ save in spsr_svc
+	msr	spsr_cxsf, r1			@ save in spsr_svc
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
 	mov	r0, r0
 	add	sp, sp, #S_FRAME_SIZE - S_PC
@@ -125,7 +125,7 @@
 	.macro	slow_restore_user_regs
 	ldr	r1, [sp, #S_PSR]		@ get calling cpsr
 	ldr	lr, [sp, #S_PC]!		@ get pc
-	msr	spsr, r1			@ save in spsr_svc
+	msr	spsr_cxsf, r1			@ save in spsr_svc
 	ldmdb	sp, {r0 - lr}^			@ get calling r1 - lr
 	mov	r0, r0
 	add	sp, sp, #S_FRAME_SIZE - S_PC

arch/arm/lib/ecard.S

@@ -16,7 +16,7 @@
 
 #define CPSR2SPSR(rt) \
 		mrs	rt, cpsr; \
-		msr	spsr, rt
+		msr	spsr_cxsf, rt
 
 @ Purpose: call an expansion card loader to read bytes.
 @ Proto  : char read_loader(int offset, char *card_base, char *loader);

arch/arm/mach-s3c2410/Makefile

@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= s3c2410.o irq.o time.o
+obj-y			:= s3c2410.o irq.o time.o gpio.o
 obj-m			:=
 obj-n			:=
 obj-			:=

arch/arm/mach-s3c2410/gpio.c

+/* linux/arch/arm/mach-s3c2410/gpio.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-gpio.h>
+
+void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
+{
+	unsigned long base = S3C2410_GPIO_BASE(pin);
+	unsigned long shift = 1;
+	unsigned long mask = 3;
+	unsigned long con;
+	unsigned long flags;
+
+	if (pin < S3C2410_GPIO_BANKB) {
+		shift = 0;
+		mask  = 1;
+	}
+
+	mask <<= S3C2410_GPIO_OFFSET(pin);
+
+	local_irq_save(flags);
+
+	con = __raw_readl(base + 0x00);
+
+	con &= mask << shift;
+	con |= function;
+
+	__raw_writel(con, base + 0x00);
+
+	local_irq_restore(flags);
+}
+
+void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+{
+	unsigned long base = S3C2410_GPIO_BASE(pin);
+	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	unsigned long flags;
+	unsigned long up;
+
+	if (pin < S3C2410_GPIO_BANKB)
+		return;
+
+	local_irq_save(flags);
+
+	up = __raw_readl(base + 0x08);
+	up &= 1 << offs;
+	up |= to << offs;
+	__raw_writel(up, base + 0x08);
+
+	local_irq_restore(flags);
+}
+
+void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
+{
+	unsigned long base = S3C2410_GPIO_BASE(pin);
+	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	unsigned long flags;
+	unsigned long dat;
+
+	local_irq_save(flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= 1 << offs;
+	dat |= to << offs;
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+}

arch/arm/mach-s3c2410/mach-h1940.c

@@ -52,7 +52,7 @@ static struct s3c2410_uartcfg ipaq_uartcfgs[] = {
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.clock	     = &s3c2410_hclk,
+		.clock	     = &s3c2410_pclk,
 		.ucon	     = 0x3c5,
 		.ulcon	     = 0x03,
 		.ufcon	     = 0x51,
@@ -60,7 +60,7 @@ static struct s3c2410_uartcfg ipaq_uartcfgs[] = {
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
-		.clock	     = &s3c2410_hclk,
+		.clock	     = &s3c2410_pclk,
 		.ucon	     = 0x245,
 		.ulcon	     = 0x03,
 		.ufcon	     = 0x00,
@@ -69,7 +69,7 @@ static struct s3c2410_uartcfg ipaq_uartcfgs[] = {
 	[2] = {
 		.hwport	     = 2,
 		.flags	     = 0,
-		.clock	     = &s3c2410_hclk,
+		.clock	     = &s3c2410_pclk,
 		.ucon	     = 0x3c5,
 		.ulcon	     = 0x43,
 		.ufcon	     = 0x51,

arch/arm/mach-s3c2410/s3c2410.h

@@ -4,5 +4,5 @@ extern void s3c2410_map_io(struct map_desc *, int count);
 
 extern void s3c2410_init_irq(void);
 
-extern s3c2410_init_time(void);
+extern void s3c2410_init_time(void);
 

arch/arm/mach-sa1100/collie.c

@@ -141,4 +141,5 @@ MACHINE_START(COLLIE, "Sharp-Collie")
 	MAPIO(collie_map_io)
 	INITIRQ(sa1100_init_irq)
 	INIT_MACHINE(collie_init)
+	INITTIME(sa1100_init_time)
 MACHINE_END

arch/arm/mm/blockops.c

@@ -130,6 +130,7 @@ static struct undef_hook blockops_hook __initdata = {
 static int __init blockops_check(void)
 {
 	register unsigned int err asm("r4") = 0;
+	unsigned int err_pos = 1;
 	unsigned int cache_type;
 	int i;
 
@@ -156,8 +157,8 @@ static int __init blockops_check(void)
 
 	unregister_undef_hook(&blockops_hook);
 
-	for (i = 0; i < ARRAY_SIZE(func); i++, err >>= 1)
-		printk("%30s: %ssupported\n", func[i], err & 1 ? "not " : "");
+	for (i = 0; i < ARRAY_SIZE(func); i++, err_pos <<= 1)
+		printk("%30s: %ssupported\n", func[i], err & err_pos ? "not " : "");
 
 	if ((err & 8) == 0) {
 		printk(" --> Using %s block cache invalidate\n",

include/asm-arm/arch-s3c2410/hardware.h

@@ -26,6 +26,41 @@ extern unsigned long s3c2410_pclk;
 extern unsigned long s3c2410_hclk;
 extern unsigned long s3c2410_fclk;
 
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
 #endif /* __ASSEMBLY__ */
 
 #include <asm/sizes.h>

include/asm-arm/arch-s3c2410/regs-gpio.h

 /* linux/include/asm/hardware/s3c2410/
  *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
  *		           http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
@@ -13,12 +13,31 @@
  *    19-06-2003     BJD     Created file
  *    23-06-2003     BJD     Updated GSTATUS registers
  *    12-03-2004     BJD     Updated include protection
+ *    20-07-2004     BJD     Added GPIO pin numbers, added Port A definitions
  */
 
 
 #ifndef __ASM_ARCH_REGS_GPIO_H
 #define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
 
+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+
+#define S3C2410_GPIO_BANKA   (32*0)
+#define S3C2410_GPIO_BANKB   (32*1)
+#define S3C2410_GPIO_BANKC   (32*2)
+#define S3C2410_GPIO_BANKD   (32*3)
+#define S3C2410_GPIO_BANKE   (32*4)
+#define S3C2410_GPIO_BANKF   (32*5)
+#define S3C2410_GPIO_BANKG   (32*6)
+#define S3C2410_GPIO_BANKH   (32*7)
+
+#define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C2410_VA_GPIO)
+#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
+
+/* general configuration options */
+
+#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
+
 /* configure GPIO ports A..G */
 
 #define S3C2410_GPIOREG(x) ((x) + S3C2410_VA_GPIO)
@@ -29,6 +48,98 @@
 #define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
 #define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
 
+#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
+#define S3C2410_GPA0_OUT     (0<<0)
+#define S3C2410_GPA0_ADDR0   (1<<0)
+
+#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
+#define S3C2410_GPA1_OUT     (0<<1)
+#define S3C2410_GPA1_ADDR16  (1<<1)
+
+#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
+#define S3C2410_GPA2_OUT     (0<<2)
+#define S3C2410_GPA2_ADDR17  (1<<2)
+
+#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
+#define S3C2410_GPA3_OUT     (0<<3)
+#define S3C2410_GPA3_ADDR18  (1<<3)
+
+#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
+#define S3C2410_GPA4_OUT     (0<<4)
+#define S3C2410_GPA4_ADDR19  (1<<4)
+
+#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
+#define S3C2410_GPA5_OUT     (0<<5)
+#define S3C2410_GPA5_ADDR20  (1<<5)
+
+#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
+#define S3C2410_GPA6_OUT     (0<<6)
+#define S3C2410_GPA6_ADDR21  (1<<6)
+
+#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
+#define S3C2410_GPA7_OUT     (0<<7)
+#define S3C2410_GPA7_ADDR22  (1<<7)
+
+#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
+#define S3C2410_GPA8_OUT     (0<<8)
+#define S3C2410_GPA8_ADDR23  (1<<8)
+
+#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
+#define S3C2410_GPA9_OUT     (0<<9)
+#define S3C2410_GPA9_ADDR24  (1<<9)
+
+#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
+#define S3C2410_GPA10_OUT    (0<<10)
+#define S3C2410_GPA10_ADDR25 (1<<10)
+
+#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
+#define S3C2410_GPA11_OUT    (0<<11)
+#define S3C2410_GPA11_ADDR26 (1<<11)
+
+#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
+#define S3C2410_GPA12_OUT    (0<<12)
+#define S3C2410_GPA12_nGCS1  (1<<12)
+
+#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
+#define S3C2410_GPA13_OUT    (0<<13)
+#define S3C2410_GPA13_nGCS2  (1<<13)
+
+#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
+#define S3C2410_GPA14_OUT    (0<<14)
+#define S3C2410_GPA14_nGCS3  (1<<14)
+
+#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
+#define S3C2410_GPA15_OUT    (0<<15)
+#define S3C2410_GPA15_nGCS4  (1<<15)
+
+#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
+#define S3C2410_GPA16_OUT    (0<<16)
+#define S3C2410_GPA16_nGCS5  (1<<16)
+
+#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
+#define S3C2410_GPA17_OUT    (0<<17)
+#define S3C2410_GPA17_CLE    (1<<17)
+
+#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
+#define S3C2410_GPA18_OUT    (0<<18)
+#define S3C2410_GPA18_ALE    (1<<18)
+
+#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
+#define S3C2410_GPA19_OUT    (0<<19)
+#define S3C2410_GPA19_nFWE   (1<<19)
+
+#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
+#define S3C2410_GPA20_OUT    (0<<20)
+#define S3C2410_GPA20_nFRE   (1<<20)
+
+#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
+#define S3C2410_GPA21_OUT    (0<<21)
+#define S3C2410_GPA21_nRSTOUT (1<<21)
+
+#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
+#define S3C2410_GPA22_OUT    (0<<22)
+#define S3C2410_GPA22_nFCE   (1<<22)
+
 /* 0x08 and 0x0c are reserved */
 
 /* GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
@@ -44,47 +155,58 @@
 
 /* no i/o pin in port b can have value 3! */
 
+#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
 #define S3C2410_GPB0_INP     (0x00 << 0)
 #define S3C2410_GPB0_OUTP    (0x01 << 0)
 #define S3C2410_GPB0_TOUT0   (0x02 << 0)
 
+#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
 #define S3C2410_GPB1_INP     (0x00 << 2)
 #define S3C2410_GPB1_OUTP    (0x01 << 2)
 #define S3C2410_GPB1_TOUT1   (0x02 << 2)
 
+#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
 #define S3C2410_GPB2_INP     (0x00 << 4)
 #define S3C2410_GPB2_OUTP    (0x01 << 4)
 #define S3C2410_GPB2_TOUT2   (0x02 << 4)
 
+#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
 #define S3C2410_GPB3_INP     (0x00 << 6)
 #define S3C2410_GPB3_OUTP    (0x01 << 6)
 #define S3C2410_GPB3_TOUT3   (0x02 << 6)
 
+#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
 #define S3C2410_GPB4_INP     (0x00 << 8)
 #define S3C2410_GPB4_OUTP    (0x01 << 8)
 #define S3C2410_GPB4_TCLK0   (0x02 << 8)
 #define S3C2410_GPB4_MASK    (0x03 << 8)
 
+#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
 #define S3C2410_GPB5_INP     (0x00 << 10)
 #define S3C2410_GPB5_OUTP    (0x01 << 10)
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
 
+#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
 #define S3C2410_GPB6_INP     (0x00 << 12)
 #define S3C2410_GPB6_OUTP    (0x01 << 12)
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
 
+#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
 #define S3C2410_GPB7_INP     (0x00 << 14)
 #define S3C2410_GPB7_OUTP    (0x01 << 14)
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
 
+#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
 #define S3C2410_GPB8_INP     (0x00 << 16)
 #define S3C2410_GPB8_OUTP    (0x01 << 16)
 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
 
+#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
 #define S3C2410_GPB9_INP     (0x00 << 18)
 #define S3C2410_GPB9_OUTP    (0x01 << 18)
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
 
+#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
 #define S3C2410_GPB10_INP    (0x00 << 18)
 #define S3C2410_GPB10_OUTP   (0x01 << 18)
 #define S3C2410_GPB10_nXDRE0 (0x02 << 18)
@@ -99,66 +221,82 @@
 #define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
 #define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
 
+#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
 #define S3C2410_GPC0_INP	(0x00 << 0)
 #define S3C2410_GPC0_OUTP	(0x01 << 0)
 #define S3C2410_GPC0_LEND	(0x02 << 0)
 
+#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
 #define S3C2410_GPC1_INP	(0x00 << 2)
 #define S3C2410_GPC1_OUTP	(0x01 << 2)
 #define S3C2410_GPC1_VCLK	(0x02 << 2)
 
+#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
 #define S3C2410_GPC2_INP	(0x00 << 4)
 #define S3C2410_GPC2_OUTP	(0x01 << 4)
 #define S3C2410_GPC2_VLINE	(0x02 << 4)
 
+#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
 #define S3C2410_GPC3_INP	(0x00 << 6)
 #define S3C2410_GPC3_OUTP	(0x01 << 6)
 #define S3C2410_GPC3_VFRAME	(0x02 << 6)
 
+#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
 #define S3C2410_GPC4_INP	(0x00 << 8)
 #define S3C2410_GPC4_OUTP	(0x01 << 8)
 #define S3C2410_GPC4_VM		(0x02 << 8)
 
+#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
 #define S3C2410_GPC5_INP	(0x00 << 10)
 #define S3C2410_GPC5_OUTP	(0x01 << 10)
 #define S3C2410_GPC5_LCDVF0	(0x02 << 10)
 
+#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
 #define S3C2410_GPC6_INP	(0x00 << 12)
 #define S3C2410_GPC6_OUTP	(0x01 << 12)
 #define S3C2410_GPC6_LCDVF1	(0x02 << 12)
 
+#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
 #define S3C2410_GPC7_INP	(0x00 << 14)
 #define S3C2410_GPC7_OUTP	(0x01 << 14)
 #define S3C2410_GPC7_LCDVF2	(0x02 << 14)
 
+#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
 #define S3C2410_GPC8_INP	(0x00 << 16)
 #define S3C2410_GPC8_OUTP	(0x01 << 16)
 #define S3C2410_GPC8_VD0	(0x02 << 16)
 
+#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
 #define S3C2410_GPC9_INP	(0x00 << 18)
 #define S3C2410_GPC9_OUTP	(0x01 << 18)
 #define S3C2410_GPC9_VD1	(0x02 << 18)
 
+#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
 #define S3C2410_GPC10_INP	(0x00 << 20)
 #define S3C2410_GPC10_OUTP	(0x01 << 20)
 #define S3C2410_GPC10_VD2	(0x02 << 20)
 
+#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
 #define S3C2410_GPC11_INP	(0x00 << 22)
 #define S3C2410_GPC11_OUTP	(0x01 << 22)
 #define S3C2410_GPC11_VD3	(0x02 << 22)
 
+#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
 #define S3C2410_GPC12_INP	(0x00 << 24)
 #define S3C2410_GPC12_OUTP	(0x01 << 24)
 #define S3C2410_GPC12_VD4	(0x02 << 24)
 
+#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
 #define S3C2410_GPC13_INP	(0x00 << 26)
 #define S3C2410_GPC13_OUTP	(0x01 << 26)
 #define S3C2410_GPC13_VD5	(0x02 << 26)
 
+#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
 #define S3C2410_GPC14_INP	(0x00 << 28)
 #define S3C2410_GPC14_OUTP	(0x01 << 28)
 #define S3C2410_GPC14_VD6	(0x02 << 28)
 
+#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
 #define S3C2410_GPC15_INP	(0x00 << 30)
 #define S3C2410_GPC15_OUTP	(0x01 << 30)
 #define S3C2410_GPC15_VD7	(0x02 << 30)
@@ -173,66 +311,82 @@
 #define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
 #define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
 
+#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
 #define S3C2410_GPD0_INP	(0x00 << 0)
 #define S3C2410_GPD0_OUTP	(0x01 << 0)
 #define S3C2410_GPD0_VD8	(0x02 << 0)
 
+#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
 #define S3C2410_GPD1_INP	(0x00 << 2)
 #define S3C2410_GPD1_OUTP	(0x01 << 2)
 #define S3C2410_GPD1_VD9	(0x02 << 2)
 
+#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
 #define S3C2410_GPD2_INP	(0x00 << 4)
 #define S3C2410_GPD2_OUTP	(0x01 << 4)
 #define S3C2410_GPD2_VD10	(0x02 << 4)
 
+#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
 #define S3C2410_GPD3_INP	(0x00 << 6)
 #define S3C2410_GPD3_OUTP	(0x01 << 6)
 #define S3C2410_GPD3_VD11	(0x02 << 6)
 
+#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
 #define S3C2410_GPD4_INP	(0x00 << 8)
 #define S3C2410_GPD4_OUTP	(0x01 << 8)
 #define S3C2410_GPD4_VD12	(0x02 << 8)
 
+#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
 #define S3C2410_GPD5_INP	(0x00 << 10)
 #define S3C2410_GPD5_OUTP	(0x01 << 10)
 #define S3C2410_GPD5_VD13	(0x02 << 10)
 
+#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
 #define S3C2410_GPD6_INP	(0x00 << 12)
 #define S3C2410_GPD6_OUTP	(0x01 << 12)
 #define S3C2410_GPD6_VD14	(0x02 << 12)
 
+#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
 #define S3C2410_GPD7_INP	(0x00 << 14)
 #define S3C2410_GPD7_OUTP	(0x01 << 14)
 #define S3C2410_GPD7_VD15	(0x02 << 14)
 
+#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
 #define S3C2410_GPD8_INP	(0x00 << 16)
 #define S3C2410_GPD8_OUTP	(0x01 << 16)
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 
+#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
 #define S3C2410_GPD9_INP	(0x00 << 18)
 #define S3C2410_GPD9_OUTP	(0x01 << 18)
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 
+#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
 #define S3C2410_GPD10_INP	(0x00 << 20)
 #define S3C2410_GPD10_OUTP	(0x01 << 20)
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 
+#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
 #define S3C2410_GPD11_INP	(0x00 << 22)
 #define S3C2410_GPD11_OUTP	(0x01 << 22)
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
+#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
 #define S3C2410_GPD12_INP	(0x00 << 24)
 #define S3C2410_GPD12_OUTP	(0x01 << 24)
 #define S3C2410_GPD12_VD20	(0x02 << 24)
 
+#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
 #define S3C2410_GPD13_INP	(0x00 << 26)
 #define S3C2410_GPD13_OUTP	(0x01 << 26)
 #define S3C2410_GPD13_VD21	(0x02 << 26)
 
+#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
 #define S3C2410_GPD14_INP	(0x00 << 28)
 #define S3C2410_GPD14_OUTP	(0x01 << 28)
 #define S3C2410_GPD14_VD22	(0x02 << 28)
 
+#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
 #define S3C2410_GPD15_INP	(0x00 << 30)
 #define S3C2410_GPD15_OUTP	(0x01 << 30)
 #define S3C2410_GPD15_VD23	(0x02 << 30)
@@ -247,71 +401,87 @@
 #define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
 #define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
 
+#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
 #define S3C2410_GPE0_INP       (0x00 << 0)
 #define S3C2410_GPE0_OUTP      (0x01 << 0)
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
+#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
 #define S3C2410_GPE1_INP       (0x00 << 2)
 #define S3C2410_GPE1_OUTP      (0x01 << 2)
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
 #define S3C2410_GPE1_MASK      (0x03 << 2)
 
+#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
 #define S3C2410_GPE2_INP       (0x00 << 4)
 #define S3C2410_GPE2_OUTP      (0x01 << 4)
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
 
+#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
 #define S3C2410_GPE3_INP       (0x00 << 6)
 #define S3C2410_GPE3_OUTP      (0x01 << 6)
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
 #define S3C2410_GPE3_MASK      (0x03 << 6)
 
+#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
 #define S3C2410_GPE4_INP       (0x00 << 8)
 #define S3C2410_GPE4_OUTP      (0x01 << 8)
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
 #define S3C2410_GPE4_MASK      (0x03 << 8)
 
+#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
 #define S3C2410_GPE5_INP       (0x00 << 10)
 #define S3C2410_GPE5_OUTP      (0x01 << 10)
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
 
+#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
 #define S3C2410_GPE6_INP       (0x00 << 12)
 #define S3C2410_GPE6_OUTP      (0x01 << 12)
 #define S3C2410_GPE6_SDCLK     (0x02 << 12)
 
+#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
 #define S3C2410_GPE7_INP       (0x00 << 14)
 #define S3C2410_GPE7_OUTP      (0x01 << 14)
 #define S3C2410_GPE7_SDCMD     (0x02 << 14)
 
+#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
 #define S3C2410_GPE8_INP       (0x00 << 16)
 #define S3C2410_GPE8_OUTP      (0x01 << 16)
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 
+#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
 #define S3C2410_GPE9_INP       (0x00 << 18)
 #define S3C2410_GPE9_OUTP      (0x01 << 18)
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 
+#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
 #define S3C2410_GPE10_INP      (0x00 << 20)
 #define S3C2410_GPE10_OUTP     (0x01 << 20)
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 
+#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
 #define S3C2410_GPE11_INP      (0x00 << 22)
 #define S3C2410_GPE11_OUTP     (0x01 << 22)
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
 
+#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
 #define S3C2410_GPE12_INP      (0x00 << 24)
 #define S3C2410_GPE12_OUTP     (0x01 << 24)
 #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
 
+#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
 #define S3C2410_GPE13_INP      (0x00 << 26)
 #define S3C2410_GPE13_OUTP     (0x01 << 26)
 #define S3C2410_GPE13_SPICLK0  (0x02 << 26)
 
+#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
 #define S3C2410_GPE14_INP      (0x00 << 28)
 #define S3C2410_GPE14_OUTP     (0x01 << 28)
 #define S3C2410_GPE14_IICSCL   (0x02 << 28)
 #define S3C2410_GPE14_MASK     (0x03 << 28)
 
+#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
 #define S3C2410_GPE15_INP      (0x00 << 30)
 #define S3C2410_GPE15_OUTP     (0x01 << 30)
 #define S3C2410_GPE15_IICSDA   (0x02 << 30)
@@ -333,35 +503,42 @@
 #define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
 #define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
 
-
+#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
 #define S3C2410_GPF0_INP    (0x00 << 0)
 #define S3C2410_GPF0_OUTP   (0x01 << 0)
 #define S3C2410_GPF0_EINT0  (0x02 << 0)
 
+#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
 #define S3C2410_GPF1_INP    (0x00 << 2)
 #define S3C2410_GPF1_OUTP   (0x01 << 2)
 #define S3C2410_GPF1_EINT1  (0x02 << 2)
 
+#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
 #define S3C2410_GPF2_INP    (0x00 << 4)
 #define S3C2410_GPF2_OUTP   (0x01 << 4)
 #define S3C2410_GPF2_EINT2  (0x02 << 4)
 
+#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
 #define S3C2410_GPF3_INP    (0x00 << 6)
 #define S3C2410_GPF3_OUTP   (0x01 << 6)
 #define S3C2410_GPF3_EINT3  (0x02 << 6)
 
+#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
 #define S3C2410_GPF4_INP    (0x00 << 8)
 #define S3C2410_GPF4_OUTP   (0x01 << 8)
 #define S3C2410_GPF4_EINT4  (0x02 << 8)
 
+#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
 #define S3C2410_GPF5_INP    (0x00 << 10)
 #define S3C2410_GPF5_OUTP   (0x01 << 10)
 #define S3C2410_GPF5_EINT5  (0x02 << 10)
 
+#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
 #define S3C2410_GPF6_INP    (0x00 << 12)
 #define S3C2410_GPF6_OUTP   (0x01 << 12)
 #define S3C2410_GPF6_EINT6  (0x02 << 12)
 
+#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
 #define S3C2410_GPF7_INP    (0x00 << 14)
 #define S3C2410_GPF7_OUTP   (0x01 << 14)
 #define S3C2410_GPF7_EINT7  (0x02 << 14)
@@ -378,74 +555,90 @@
 #define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
 #define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
 
+#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
 #define S3C2410_GPG0_INP      (0x00 << 0)
 #define S3C2410_GPG0_OUTP     (0x01 << 0)
 #define S3C2410_GPG0_EINT8    (0x02 << 0)
 
+#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
 #define S3C2410_GPG1_INP      (0x00 << 2)
 #define S3C2410_GPG1_OUTP     (0x01 << 2)
 #define S3C2410_GPG1_EINT9    (0x02 << 2)
 
+#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
 #define S3C2410_GPG2_INP      (0x00 << 4)
 #define S3C2410_GPG2_OUTP     (0x01 << 4)
 #define S3C2410_GPG2_EINT10   (0x02 << 4)
 
+#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
 #define S3C2410_GPG3_INP      (0x00 << 6)
 #define S3C2410_GPG3_OUTP     (0x01 << 6)
 #define S3C2410_GPG3_EINT11   (0x02 << 6)
 
+#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
 #define S3C2410_GPG4_INP      (0x00 << 8)
 #define S3C2410_GPG4_OUTP     (0x01 << 8)
 #define S3C2410_GPG4_EINT12   (0x02 << 8)
 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
 
+#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
 #define S3C2410_GPG5_INP      (0x00 << 10)
 #define S3C2410_GPG5_OUTP     (0x01 << 10)
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)
 
+#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
 #define S3C2410_GPG6_INP      (0x00 << 12)
 #define S3C2410_GPG6_OUTP     (0x01 << 12)
 #define S3C2410_GPG6_EINT14   (0x02 << 12)
 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
 
+#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
 #define S3C2410_GPG7_INP      (0x00 << 14)
 #define S3C2410_GPG7_OUTP     (0x01 << 14)
 #define S3C2410_GPG7_EINT15   (0x02 << 14)
 #define S3C2410_GPG7_SPICLK1  (0x03 << 14)
 
+#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
 #define S3C2410_GPG8_INP      (0x00 << 16)
 #define S3C2410_GPG8_OUTP     (0x01 << 16)
 #define S3C2410_GPG8_EINT16   (0x02 << 16)
 
+#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
 #define S3C2410_GPG9_INP      (0x00 << 18)
 #define S3C2410_GPG9_OUTP     (0x01 << 18)
 #define S3C2410_GPG9_EINT17   (0x02 << 18)
 
+#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
 #define S3C2410_GPG10_INP     (0x00 << 20)
 #define S3C2410_GPG10_OUTP    (0x01 << 20)
 #define S3C2410_GPG10_EINT18  (0x02 << 20)
 
+#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
 #define S3C2410_GPG11_INP     (0x00 << 22)
 #define S3C2410_GPG11_OUTP    (0x01 << 22)
 #define S3C2410_GPG11_EINT19  (0x02 << 22)
 #define S3C2410_GPG11_TCLK1   (0x03 << 22)
 
+#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
 #define S3C2410_GPG12_INP     (0x00 << 24)
 #define S3C2410_GPG12_OUTP    (0x01 << 24)
 #define S3C2410_GPG12_EINT18  (0x02 << 24)
 #define S3C2410_GPG12_XMON    (0x03 << 24)
 
+#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
 #define S3C2410_GPG13_INP     (0x00 << 26)
 #define S3C2410_GPG13_OUTP    (0x01 << 26)
 #define S3C2410_GPG13_EINT18  (0x02 << 26)
 #define S3C2410_GPG13_nXPON   (0x03 << 26)
 
+#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
 #define S3C2410_GPG14_INP     (0x00 << 28)
 #define S3C2410_GPG14_OUTP    (0x01 << 28)
 #define S3C2410_GPG14_EINT18  (0x02 << 28)
 #define S3C2410_GPG14_YMON    (0x03 << 28)
 
+#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
 #define S3C2410_GPG15_INP     (0x00 << 30)
 #define S3C2410_GPG15_OUTP    (0x01 << 30)
 #define S3C2410_GPG15_EINT18  (0x02 << 30)
@@ -466,48 +659,59 @@
 #define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
 #define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
 
+#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
 #define S3C2410_GPH0_INP    (0x00 << 0)
 #define S3C2410_GPH0_OUTP   (0x01 << 0)
 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
 
+#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
 #define S3C2410_GPH1_INP    (0x00 << 2)
 #define S3C2410_GPH1_OUTP   (0x01 << 2)
 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
 
+#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
 #define S3C2410_GPH2_INP    (0x00 << 4)
 #define S3C2410_GPH2_OUTP   (0x01 << 4)
 #define S3C2410_GPH2_TXD0   (0x02 << 4)
 
+#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
 #define S3C2410_GPH3_INP    (0x00 << 6)
 #define S3C2410_GPH3_OUTP   (0x01 << 6)
 #define S3C2410_GPH3_RXD0   (0x02 << 6)
 
+#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
 #define S3C2410_GPH4_INP    (0x00 << 8)
 #define S3C2410_GPH4_OUTP   (0x01 << 8)
 #define S3C2410_GPH4_TXD1   (0x02 << 8)
 
+#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
 #define S3C2410_GPH5_INP    (0x00 << 10)
 #define S3C2410_GPH5_OUTP   (0x01 << 10)
 #define S3C2410_GPH5_RXD1   (0x02 << 10)
 
+#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
 #define S3C2410_GPH6_INP    (0x00 << 12)
 #define S3C2410_GPH6_OUTP   (0x01 << 12)
 #define S3C2410_GPH6_TXD2   (0x02 << 12)
 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
 
+#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
 #define S3C2410_GPH7_INP    (0x00 << 14)
 #define S3C2410_GPH7_OUTP   (0x01 << 14)
 #define S3C2410_GPH7_RXD2   (0x02 << 14)
 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
 
+#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
 #define S3C2410_GPH8_INP    (0x00 << 16)
 #define S3C2410_GPH8_OUTP   (0x01 << 16)
 #define S3C2410_GPH8_UCLK   (0x02 << 16)
 
+#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
 #define S3C2410_GPH9_INP      (0x00 << 18)
 #define S3C2410_GPH9_OUTP     (0x01 << 18)
 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 
+#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
 #define S3C2410_GPH10_INP     (0x00 << 20)
 #define S3C2410_GPH10_OUTP    (0x01 << 20)
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)