Commit 8ca4746a authored by Gregory CLEMENT's avatar Gregory CLEMENT Committed by Stephen Boyd

clk: mvebu: Add the peripheral clock driver for Armada 3700

These clocks are the ones which will be used as source for the
peripherals of the Armada 3700 SoC. On this SoC there is two blocks of
clocks: the North bridge one and the South bridge one.

Most of them are gatable. Most of the time their rate are their parent
rated divided by a ratio depending of two registers. Their parent can be
choose between the TBG clocks for most of them.

However, some of them can't choose their parent or directly depend of the
xtal clocks. Other ones do not use exactly the same pattern to find the
ratio between their parent rate and their rate.

For these reason each clock is a composite clock and the operations they
use are different depending of the clock.

According to the datasheet it would be possible to select the parent
clock and the ratio, however currently the driver does not support it.
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
parent c6d591c1
......@@ -8,6 +8,7 @@ obj-$(CONFIG_ARMADA_38X_CLK) += armada-38x.o
obj-$(CONFIG_ARMADA_39X_CLK) += armada-39x.o
obj-$(CONFIG_ARMADA_37XX_CLK) += armada-37xx-xtal.o
obj-$(CONFIG_ARMADA_37XX_CLK) += armada-37xx-tbg.o
obj-$(CONFIG_ARMADA_37XX_CLK) += armada-37xx-periph.o
obj-$(CONFIG_ARMADA_XP_CLK) += armada-xp.o
obj-$(CONFIG_ARMADA_AP806_SYSCON) += ap806-system-controller.o
obj-$(CONFIG_ARMADA_CP110_SYSCON) += cp110-system-controller.o
......
/*
* Marvell Armada 37xx SoC Peripheral clocks
*
* Copyright (C) 2016 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2 or later. This program is licensed "as is"
* without any warranty of any kind, whether express or implied.
*
* Most of the peripheral clocks can be modelled like this:
* _____ _______ _______
* TBG-A-P --| | | | | | ______
* TBG-B-P --| Mux |--| /div1 |--| /div2 |--| Gate |--> perip_clk
* TBG-A-S --| | | | | | |______|
* TBG-B-S --|_____| |_______| |_______|
*
* However some clocks may use only one or two block or and use the
* xtal clock as parent.
*/
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#define TBG_SEL 0x0
#define DIV_SEL0 0x4
#define DIV_SEL1 0x8
#define DIV_SEL2 0xC
#define CLK_SEL 0x10
#define CLK_DIS 0x14
struct clk_periph_driver_data {
struct clk_hw_onecell_data *hw_data;
spinlock_t lock;
};
struct clk_double_div {
struct clk_hw hw;
void __iomem *reg1;
u8 shift1;
void __iomem *reg2;
u8 shift2;
};
#define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
struct clk_periph_data {
const char *name;
const char * const *parent_names;
int num_parents;
struct clk_hw *mux_hw;
struct clk_hw *rate_hw;
struct clk_hw *gate_hw;
bool is_double_div;
};
static const struct clk_div_table clk_table6[] = {
{ .val = 1, .div = 1, },
{ .val = 2, .div = 2, },
{ .val = 3, .div = 3, },
{ .val = 4, .div = 4, },
{ .val = 5, .div = 5, },
{ .val = 6, .div = 6, },
{ .val = 0, .div = 0, }, /* last entry */
};
static const struct clk_div_table clk_table1[] = {
{ .val = 0, .div = 1, },
{ .val = 1, .div = 2, },
{ .val = 0, .div = 0, }, /* last entry */
};
static const struct clk_div_table clk_table2[] = {
{ .val = 0, .div = 2, },
{ .val = 1, .div = 4, },
{ .val = 0, .div = 0, }, /* last entry */
};
static const struct clk_ops clk_double_div_ops;
#define PERIPH_GATE(_name, _bit) \
struct clk_gate gate_##_name = { \
.reg = (void *)CLK_DIS, \
.bit_idx = _bit, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_gate_ops, \
} \
};
#define PERIPH_MUX(_name, _shift) \
struct clk_mux mux_##_name = { \
.reg = (void *)TBG_SEL, \
.shift = _shift, \
.mask = 3, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_mux_ro_ops, \
} \
};
#define PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2) \
struct clk_double_div rate_##_name = { \
.reg1 = (void *)_reg1, \
.reg2 = (void *)_reg2, \
.shift1 = _shift1, \
.shift2 = _shift2, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_double_div_ops, \
} \
};
#define PERIPH_DIV(_name, _reg, _shift, _table) \
struct clk_divider rate_##_name = { \
.reg = (void *)_reg, \
.table = _table, \
.shift = _shift, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_divider_ro_ops, \
} \
};
#define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\
static PERIPH_GATE(_name, _bit); \
static PERIPH_MUX(_name, _shift); \
static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
#define PERIPH_CLK_FULL(_name, _bit, _shift, _reg, _shift1, _table) \
static PERIPH_GATE(_name, _bit); \
static PERIPH_MUX(_name, _shift); \
static PERIPH_DIV(_name, _reg, _shift1, _table);
#define PERIPH_CLK_GATE_DIV(_name, _bit, _reg, _shift, _table) \
static PERIPH_GATE(_name, _bit); \
static PERIPH_DIV(_name, _reg, _shift, _table);
#define PERIPH_CLK_MUX_DIV(_name, _shift, _reg, _shift_div, _table) \
static PERIPH_MUX(_name, _shift); \
static PERIPH_DIV(_name, _reg, _shift_div, _table);
#define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\
static PERIPH_MUX(_name, _shift); \
static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
#define REF_CLK_FULL(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
.mux_hw = &mux_##_name.hw, \
.gate_hw = &gate_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
}
#define REF_CLK_FULL_DD(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
.mux_hw = &mux_##_name.hw, \
.gate_hw = &gate_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
.is_double_div = true, \
}
#define REF_CLK_GATE(_name, _parent_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ _parent_name}, \
.num_parents = 1, \
.gate_hw = &gate_##_name.hw, \
}
#define REF_CLK_GATE_DIV(_name, _parent_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ _parent_name}, \
.num_parents = 1, \
.gate_hw = &gate_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
}
#define REF_CLK_MUX_DIV(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
.mux_hw = &mux_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
}
#define REF_CLK_MUX_DD(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
.mux_hw = &mux_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
.is_double_div = true, \
}
/* NB periph clocks */
PERIPH_CLK_FULL_DD(mmc, 2, 0, DIV_SEL2, DIV_SEL2, 16, 13);
PERIPH_CLK_FULL_DD(sata_host, 3, 2, DIV_SEL2, DIV_SEL2, 10, 7);
PERIPH_CLK_FULL_DD(sec_at, 6, 4, DIV_SEL1, DIV_SEL1, 3, 0);
PERIPH_CLK_FULL_DD(sec_dap, 7, 6, DIV_SEL1, DIV_SEL1, 9, 6);
PERIPH_CLK_FULL_DD(tscem, 8, 8, DIV_SEL1, DIV_SEL1, 15, 12);
PERIPH_CLK_FULL(tscem_tmx, 10, 10, DIV_SEL1, 18, clk_table6);
static PERIPH_GATE(avs, 11);
PERIPH_CLK_FULL_DD(pwm, 13, 14, DIV_SEL0, DIV_SEL0, 3, 0);
PERIPH_CLK_FULL_DD(sqf, 12, 12, DIV_SEL1, DIV_SEL1, 27, 24);
static PERIPH_GATE(i2c_2, 16);
static PERIPH_GATE(i2c_1, 17);
PERIPH_CLK_GATE_DIV(ddr_phy, 19, DIV_SEL0, 18, clk_table2);
PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV_SEL0, DIV_SEL0, 15, 12);
PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6);
PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6);
PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
PERIPH_CLK_MUX_DIV(cpu, 22, DIV_SEL0, 28, clk_table6);
static struct clk_periph_data data_nb[] ={
REF_CLK_FULL_DD(mmc),
REF_CLK_FULL_DD(sata_host),
REF_CLK_FULL_DD(sec_at),
REF_CLK_FULL_DD(sec_dap),
REF_CLK_FULL_DD(tscem),
REF_CLK_FULL(tscem_tmx),
REF_CLK_GATE(avs, "xtal"),
REF_CLK_FULL_DD(sqf),
REF_CLK_FULL_DD(pwm),
REF_CLK_GATE(i2c_2, "xtal"),
REF_CLK_GATE(i2c_1, "xtal"),
REF_CLK_GATE_DIV(ddr_phy, "TBG-A-S"),
REF_CLK_FULL_DD(ddr_fclk),
REF_CLK_FULL(trace),
REF_CLK_FULL(counter),
REF_CLK_FULL_DD(eip97),
REF_CLK_MUX_DIV(cpu),
{ },
};
/* SB periph clocks */
PERIPH_CLK_MUX_DD(gbe_50, 6, DIV_SEL2, DIV_SEL2, 6, 9);
PERIPH_CLK_MUX_DD(gbe_core, 8, DIV_SEL1, DIV_SEL1, 18, 21);
PERIPH_CLK_MUX_DD(gbe_125, 10, DIV_SEL1, DIV_SEL1, 6, 9);
static PERIPH_GATE(gbe1_50, 0);
static PERIPH_GATE(gbe0_50, 1);
static PERIPH_GATE(gbe1_125, 2);
static PERIPH_GATE(gbe0_125, 3);
PERIPH_CLK_GATE_DIV(gbe1_core, 4, DIV_SEL1, 13, clk_table1);
PERIPH_CLK_GATE_DIV(gbe0_core, 5, DIV_SEL1, 14, clk_table1);
PERIPH_CLK_GATE_DIV(gbe_bm, 12, DIV_SEL1, 0, clk_table1);
PERIPH_CLK_FULL_DD(sdio, 11, 14, DIV_SEL0, DIV_SEL0, 3, 6);
PERIPH_CLK_FULL_DD(usb32_usb2_sys, 16, 16, DIV_SEL0, DIV_SEL0, 9, 12);
PERIPH_CLK_FULL_DD(usb32_ss_sys, 17, 18, DIV_SEL0, DIV_SEL0, 15, 18);
static struct clk_periph_data data_sb[] = {
REF_CLK_MUX_DD(gbe_50),
REF_CLK_MUX_DD(gbe_core),
REF_CLK_MUX_DD(gbe_125),
REF_CLK_GATE(gbe1_50, "gbe_50"),
REF_CLK_GATE(gbe0_50, "gbe_50"),
REF_CLK_GATE(gbe1_125, "gbe_125"),
REF_CLK_GATE(gbe0_125, "gbe_125"),
REF_CLK_GATE_DIV(gbe1_core, "gbe_core"),
REF_CLK_GATE_DIV(gbe0_core, "gbe_core"),
REF_CLK_GATE_DIV(gbe_bm, "gbe_core"),
REF_CLK_FULL_DD(sdio),
REF_CLK_FULL_DD(usb32_usb2_sys),
REF_CLK_FULL_DD(usb32_ss_sys),
{ },
};
static unsigned int get_div(void __iomem *reg, int shift)
{
u32 val;
val = (readl(reg) >> shift) & 0x7;
if (val > 6)
return 0;
return val;
}
static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_double_div *double_div = to_clk_double_div(hw);
unsigned int div;
div = get_div(double_div->reg1, double_div->shift1);
div *= get_div(double_div->reg2, double_div->shift2);
return DIV_ROUND_UP_ULL((u64)parent_rate, div);
}
static const struct clk_ops clk_double_div_ops = {
.recalc_rate = clk_double_div_recalc_rate,
};
static const struct of_device_id armada_3700_periph_clock_of_match[] = {
{ .compatible = "marvell,armada-3700-periph-clock-nb",
.data = data_nb, },
{ .compatible = "marvell,armada-3700-periph-clock-sb",
.data = data_sb, },
{ }
};
static int armada_3700_add_composite_clk(const struct clk_periph_data *data,
void __iomem *reg, spinlock_t *lock,
struct device *dev, struct clk_hw *hw)
{
const struct clk_ops *mux_ops = NULL, *gate_ops = NULL,
*rate_ops = NULL;
struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *rate_hw = NULL;
if (data->mux_hw) {
struct clk_mux *mux;
mux_hw = data->mux_hw;
mux = to_clk_mux(mux_hw);
mux->lock = lock;
mux_ops = mux_hw->init->ops;
mux->reg = reg + (u64)mux->reg;
}
if (data->gate_hw) {
struct clk_gate *gate;
gate_hw = data->gate_hw;
gate = to_clk_gate(gate_hw);
gate->lock = lock;
gate_ops = gate_hw->init->ops;
gate->reg = reg + (u64)gate->reg;
}
if (data->rate_hw) {
rate_hw = data->rate_hw;
rate_ops = rate_hw->init->ops;
if (data->is_double_div) {
struct clk_double_div *rate;
rate = to_clk_double_div(rate_hw);
rate->reg1 = reg + (u64)rate->reg1;
rate->reg2 = reg + (u64)rate->reg2;
} else {
struct clk_divider *rate = to_clk_divider(rate_hw);
const struct clk_div_table *clkt;
int table_size = 0;
rate->reg = reg + (u64)rate->reg;
for (clkt = rate->table; clkt->div; clkt++)
table_size++;
rate->width = order_base_2(table_size);
rate->lock = lock;
}
}
hw = clk_hw_register_composite(dev, data->name, data->parent_names,
data->num_parents, mux_hw,
mux_ops, rate_hw, rate_ops,
gate_hw, gate_ops, CLK_IGNORE_UNUSED);
if (IS_ERR(hw))
return PTR_ERR(hw);
return 0;
}
static int armada_3700_periph_clock_probe(struct platform_device *pdev)
{
struct clk_periph_driver_data *driver_data;
struct device_node *np = pdev->dev.of_node;
const struct clk_periph_data *data;
struct device *dev = &pdev->dev;
int num_periph = 0, i, ret;
struct resource *res;
void __iomem *reg;
data = of_device_get_match_data(dev);
if (!data)
return -ENODEV;
while (data[num_periph].name)
num_periph++;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
reg = devm_ioremap_resource(dev, res);
if (IS_ERR(reg)) {
dev_err(dev, "Could not map the periph clock registers\n");
return PTR_ERR(reg);
}
driver_data = devm_kzalloc(dev, sizeof(*driver_data), GFP_KERNEL);
if (!driver_data)
return -ENOMEM;
driver_data->hw_data = devm_kzalloc(dev, sizeof(*driver_data->hw_data) +
sizeof(*driver_data->hw_data->hws) * num_periph,
GFP_KERNEL);
if (!driver_data->hw_data)
return -ENOMEM;
driver_data->hw_data->num = num_periph;
spin_lock_init(&driver_data->lock);
for (i = 0; i < num_periph; i++) {
struct clk_hw *hw = driver_data->hw_data->hws[i];
if (armada_3700_add_composite_clk(&data[i], reg,
&driver_data->lock, dev, hw))
dev_err(dev, "Can't register periph clock %s\n",
data[i].name);
}
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
driver_data->hw_data);
if (ret) {
for (i = 0; i < num_periph; i++)
clk_hw_unregister(driver_data->hw_data->hws[i]);
return ret;
}
platform_set_drvdata(pdev, driver_data);
return 0;
}
static int armada_3700_periph_clock_remove(struct platform_device *pdev)
{
struct clk_periph_driver_data *data = platform_get_drvdata(pdev);
struct clk_hw_onecell_data *hw_data = data->hw_data;
int i;
of_clk_del_provider(pdev->dev.of_node);
for (i = 0; i < hw_data->num; i++)
clk_hw_unregister(hw_data->hws[i]);
return 0;
}
static struct platform_driver armada_3700_periph_clock_driver = {
.probe = armada_3700_periph_clock_probe,
.remove = armada_3700_periph_clock_remove,
.driver = {
.name = "marvell-armada-3700-periph-clock",
.of_match_table = armada_3700_periph_clock_of_match,
},
};
builtin_platform_driver(armada_3700_periph_clock_driver);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment