Skip to content

L
linux
Commit 8d648aad authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM SoC platform updates from Olof Johansson:
 "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
  for a few platforms:

  Gemini:
   - Legacy platform that Linus Walleij has converted to multiplatform
     and DT, so a handful of various tweaks there, removal of some old
     stale support, etc.

  Atmel AT91:
   - Fixup of various power management related pieces
   - Move of SoC detection to a drivers/soc driver instead

  ST Micro STM32:
   - New SoC support: STM32H743

  TI platforms:
   - More driver support for Davinci (SATA in particular)
   - Removal of some old stale hwmod files (linkspace platform)

  Misc:
   - A couple of smaller patches for i.MX, sunxi, hisi"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  ARM: davinci: Add clock for CPPI 4.1 DMA engine
  ARM: mxs: add support for I2SE Duckbill 2 boards
  MAINTAINERS: Update the Allwinner sunXi entry
  ARM: i.MX25: globally disable supervisor protect
  ARM: at91: move SoC detection to its own driver
  ARM: at91: pm: correct typo
  ARM: at91: pm: Remove at91_pm_set_standby
  ARM: at91: pm: Merge all at91sam9*_pm_init
  ARM: at91: pm: Tie the USB clock mask to the pmc
  ARM: at91: pm: Tie the memory controller type to the ramc id
  ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
  ARM: at91: pm: Simplify at91rm9200_standby
  ARM: at91: pm: Use struct at91_pm_data in pm_suspend.S
  ARM: at91: pm: Move global variables into at91_pm_data
  ARM: at91: pm: Move at91_ramc_read/write to pm.c
  ARM: at91: pm: Cleanup headers
  MAINTAINERS: Add memory drivers to AT91 entry
  MAINTAINERS: Update AT91 entry
  ARM: davinci: add pata_bk3710 libata driver support
  ARM: OMAP2+: mark omap_init_rng as __init
  ...
parents e07e368b 17e310b8
Hide whitespace changes
Inline Side-by-side
Showing with 887 additions and 2398 deletions
Documentation/arm/stm32/stm32h743-overview.txt 0 → 100644
View file @ 8d648aad
STM32H743 Overview
==================
Introduction
------------
The STM32H743 is a Cortex-M7 MCU aimed at various applications.
It features:
- Cortex-M7 core running up to @400MHz
- 2MB internal flash, 1MBytes internal RAM
- FMC controller to connect SDRAM, NOR and NAND memories
- Dual mode QSPI
- SD/MMC/SDIO support
- Ethernet controller
- USB OTFG FS & HS controllers
- I2C, SPI, CAN busses support
- Several 16 & 32 bits general purpose timers
- Serial Audio interface
- LCD controller
- HDMI-CEC
- SPDIFRX
- DFSDM
Resources
---------
Datasheet and reference manual are publicly available on ST website:
- http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033
Document Author
---------------
Alexandre Torgue <alexandre.torgue@st.com>
MAINTAINERS
View file @ 8d648aad
......@@ -1056,8 +1056,13 @@ M: Chen-Yu Tsai <wens@csie.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
N: sun[x456789]i
F: arch/arm/boot/dts/ntc-gr8*
N: sun50i
F: arch/arm/mach-sunxi/
F: arch/arm64/boot/dts/allwinner/
F: drivers/clk/sunxi-ng/
F: drivers/pinctrl/sunxi/
F: drivers/soc/sunxi/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
ARM/Allwinner SoC Clock Support
M: Emilio López <emilio@elopez.com.ar>
......@@ -1110,7 +1115,6 @@ F: drivers/*/*aspeed*
ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@microchip.com>
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.linux4sam.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
......@@ -1122,6 +1126,7 @@ F: arch/arm/boot/dts/at91*.dtsi
F: arch/arm/boot/dts/sama*.dts
F: arch/arm/boot/dts/sama*.dtsi
F: arch/arm/include/debug/at91.S
F: drivers/memory/atmel*
ARM/ATMEL AT91 Clock Support
M: Boris Brezillon <boris.brezillon@free-electrons.com>
......
arch/arm/Kconfig
View file @ 8d648aad
......@@ -359,15 +359,6 @@ config ARM_SINGLE_ARMV7M
select SPARSE_IRQ
select USE_OF
config ARCH_GEMINI
bool "Cortina Systems Gemini"
select CLKSRC_MMIO
select CPU_FA526
select GENERIC_CLOCKEVENTS
select GPIOLIB
help
Support for the Cortina Systems Gemini family SoCs
config ARCH_EBSA110
bool "EBSA-110"
select ARCH_USES_GETTIMEOFFSET
......@@ -819,6 +810,8 @@ source "arch/arm/mach-spear/Kconfig"
source "arch/arm/mach-sti/Kconfig"
source "arch/arm/mach-stm32/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
source "arch/arm/mach-s3c64xx/Kconfig"
......@@ -877,28 +870,6 @@ config ARCH_LPC18XX
Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
high performance microcontrollers.
config ARCH_STM32
bool "STMicrolectronics STM32"
depends on ARM_SINGLE_ARMV7M
select ARCH_HAS_RESET_CONTROLLER
select ARMV7M_SYSTICK
select CLKSRC_STM32
select PINCTRL
select RESET_CONTROLLER
select STM32_EXTI
help
Support for STMicroelectronics STM32 processors.
config MACH_STM32F429
bool "STMicrolectronics STM32F429"
depends on ARCH_STM32
default y
config MACH_STM32F746
bool "STMicrolectronics STM32F746"
depends on ARCH_STM32
default y
config ARCH_MPS2
bool "ARM MPS2 platform"
depends on ARM_SINGLE_ARMV7M
......
arch/arm/include/debug/brcmstb.S
View file @ 8d648aad
......@@ -22,7 +22,8 @@
#define UARTA_3390 REG_PHYS_ADDR(0x40a900)
#define UARTA_7250 REG_PHYS_ADDR(0x40b400)
#define UARTA_7268 REG_PHYS_ADDR(0x40c000)
#define UARTA_7260 REG_PHYS_ADDR(0x40c000)
#define UARTA_7268 UARTA_7260
#define UARTA_7271 UARTA_7268
#define UARTA_7364 REG_PHYS_ADDR(0x40b000)
#define UARTA_7366 UARTA_7364
......@@ -62,13 +63,14 @@
/* Chip specific detection starts here */
20: checkuart(\rp, \rv, 0x33900000, 3390)
21: checkuart(\rp, \rv, 0x72500000, 7250)
22: checkuart(\rp, \rv, 0x72680000, 7268)
23: checkuart(\rp, \rv, 0x72710000, 7271)
24: checkuart(\rp, \rv, 0x73640000, 7364)
25: checkuart(\rp, \rv, 0x73660000, 7366)
26: checkuart(\rp, \rv, 0x07437100, 74371)
27: checkuart(\rp, \rv, 0x74390000, 7439)
28: checkuart(\rp, \rv, 0x74450000, 7445)
22: checkuart(\rp, \rv, 0x72600000, 7260)
23: checkuart(\rp, \rv, 0x72680000, 7268)
24: checkuart(\rp, \rv, 0x72710000, 7271)
25: checkuart(\rp, \rv, 0x73640000, 7364)
26: checkuart(\rp, \rv, 0x73660000, 7366)
27: checkuart(\rp, \rv, 0x07437100, 74371)
28: checkuart(\rp, \rv, 0x74390000, 7439)
29: checkuart(\rp, \rv, 0x74450000, 7445)
/* No valid UART found */
90: mov \rp, #0
......
arch/arm/mach-at91/Makefile
View file @ 8d648aad
#
# Makefile for the linux kernel.
#
obj-y := soc.o
# CPU-specific support
obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
......@@ -18,3 +17,36 @@ endif
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
endif
# Default sed regexp - multiline due to syntax constraints
define sed-y
"/^->/{s:->#\(.*\):/* \1 */:; \
s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:->::; p;}"
endef
# Use filechk to avoid rebuilds when a header changes, but the resulting file
# does not
define filechk_offsets
(set -e; \
echo "#ifndef $2"; \
echo "#define $2"; \
echo "/*"; \
echo " * DO NOT MODIFY."; \
echo " *"; \
echo " * This file was generated by Kbuild"; \
echo " */"; \
echo ""; \
sed -ne $(sed-y); \
echo ""; \
echo "#endif" )
endef
arch/arm/mach-at91/pm_data-offsets.s: arch/arm/mach-at91/pm_data-offsets.c
$(call if_changed_dep,cc_s_c)
include/generated/at91_pm_data-offsets.h: arch/arm/mach-at91/pm_data-offsets.s FORCE
$(call filechk,offsets,__PM_DATA_OFFSETS_H__)
arch/arm/mach-at91/pm_suspend.o: include/generated/at91_pm_data-offsets.h
arch/arm/mach-at91/at91rm9200.c
View file @ 8d648aad
......@@ -14,23 +14,10 @@
#include <asm/mach/arch.h>
#include "generic.h"
#include "soc.h"
static const struct at91_soc rm9200_socs[] = {
AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
{ /* sentinel */ },
};
static void __init at91rm9200_dt_device_init(void)
{
struct soc_device *soc;
struct device *soc_dev = NULL;
soc = at91_soc_init(rm9200_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_default_populate(NULL, NULL, soc_dev);
of_platform_default_populate(NULL, NULL, NULL);
at91rm9200_pm_init();
}
......
arch/arm/mach-at91/at91sam9.c
View file @ 8d648aad
......@@ -14,60 +14,12 @@
#include <asm/system_misc.h>
#include "generic.h"
#include "soc.h"
static const struct at91_soc at91sam9_socs[] = {
AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
"at91sam9m11", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
"at91sam9m10", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
"at91sam9g46", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
"at91sam9g45", "at91sam9g45"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
"at91sam9g15", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
"at91sam9g35", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
"at91sam9x35", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
"at91sam9g25", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
"at91sam9x25", "at91sam9x5"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
"at91sam9cn12", "at91sam9n12"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
"at91sam9n12", "at91sam9n12"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
"at91sam9cn11", "at91sam9n12"),
AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
{ /* sentinel */ },
};
static void __init at91sam9_common_init(void)
static void __init at91sam9_init(void)
{
struct soc_device *soc;
struct device *soc_dev = NULL;
soc = at91_soc_init(at91sam9_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_default_populate(NULL, NULL, NULL);
of_platform_default_populate(NULL, NULL, soc_dev);
}
static void __init at91sam9_dt_device_init(void)
{
at91sam9_common_init();
at91sam9260_pm_init();
at91sam9_pm_init();
}
static const char *const at91_dt_board_compat[] __initconst = {
......@@ -77,41 +29,6 @@ static const char *const at91_dt_board_compat[] __initconst = {
DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
.init_machine = at91sam9_dt_device_init,
.init_machine = at91sam9_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
static void __init at91sam9g45_dt_device_init(void)
{
at91sam9_common_init();
at91sam9g45_pm_init();
}
static const char *const at91sam9g45_board_compat[] __initconst = {
"atmel,at91sam9g45",
NULL
};
DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
/* Maintainer: Atmel */
.init_machine = at91sam9g45_dt_device_init,
.dt_compat = at91sam9g45_board_compat,
MACHINE_END
static void __init at91sam9x5_dt_device_init(void)
{
at91sam9_common_init();
at91sam9x5_pm_init();
}
static const char *const at91sam9x5_board_compat[] __initconst = {
"atmel,at91sam9x5",
"atmel,at91sam9n12",
NULL
};
DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
.init_machine = at91sam9x5_dt_device_init,
.dt_compat = at91sam9x5_board_compat,
MACHINE_END
arch/arm/mach-at91/generic.h
View file @ 8d648aad
......@@ -13,15 +13,11 @@
#ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void);
extern void __init at91sam9260_pm_init(void);
extern void __init at91sam9g45_pm_init(void);
extern void __init at91sam9x5_pm_init(void);
extern void __init at91sam9_pm_init(void);
extern void __init sama5_pm_init(void);
#else
static inline void __init at91rm9200_pm_init(void) { }
static inline void __init at91sam9260_pm_init(void) { }
static inline void __init at91sam9g45_pm_init(void) { }
static inline void __init at91sam9x5_pm_init(void) { }
static inline void __init at91sam9_pm_init(void) { }
static inline void __init sama5_pm_init(void) { }
#endif
......
arch/arm/mach-at91/pm.c
View file @ 8d648aad
......@@ -10,35 +10,22 @@
* (at your option) any later version.
*/
#include <linux/gpio.h>
#include <linux/suspend.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/genalloc.h>
#include <linux/interrupt.h>
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/platform_data/atmel.h>
#include <linux/io.h>
#include <linux/suspend.h>
#include <linux/clk/at91_pmc.h>
#include <asm/irq.h>
#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/fncpy.h>
#include <asm/cacheflush.h>
#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include "generic.h"
#include "pm.h"
static void __iomem *pmc;
/*
* FIXME: this is needed to communicate between the pinctrl driver and
* the PM implementation in the machine. Possibly part of the PM
......@@ -50,12 +37,13 @@ extern void at91_pinctrl_gpio_suspend(void);
extern void at91_pinctrl_gpio_resume(void);
#endif
static struct {
unsigned long uhp_udp_mask;
int memctrl;
} at91_pm_data;
static struct at91_pm_data pm_data;
static void __iomem *at91_ramc_base[2];
#define at91_ramc_read(id, field) \
__raw_readl(pm_data.ramc[id] + field)
#define at91_ramc_write(id, field, value) \
__raw_writel(value, pm_data.ramc[id] + field)
static int at91_pm_valid_state(suspend_state_t state)
{
......@@ -91,10 +79,10 @@ static int at91_pm_verify_clocks(void)
unsigned long scsr;
int i;
scsr = readl(pmc + AT91_PMC_SCSR);
scsr = readl(pm_data.pmc + AT91_PMC_SCSR);
/* USB must not be using PLLB */
if ((scsr & at91_pm_data.uhp_udp_mask) != 0) {
if ((scsr & pm_data.uhp_udp_mask) != 0) {
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
......@@ -105,7 +93,7 @@ static int at91_pm_verify_clocks(void)
if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
continue;
css = readl(pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
css = readl(pm_data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
if (css != AT91_PMC_CSS_SLOW) {
pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
return 0;
......@@ -131,25 +119,18 @@ int at91_suspend_entering_slow_clock(void)
}
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
void __iomem *ramc1, int memctrl);
extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
void __iomem *ramc1, int memctrl);
static void (*at91_suspend_sram_fn)(struct at91_pm_data *);
extern void at91_pm_suspend_in_sram(struct at91_pm_data *pm_data);
extern u32 at91_pm_suspend_in_sram_sz;
static void at91_pm_suspend(suspend_state_t state)
{
unsigned int pm_data = at91_pm_data.memctrl;
pm_data |= (state == PM_SUSPEND_MEM) ?
AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
pm_data.mode = (state == PM_SUSPEND_MEM) ? AT91_PM_SLOW_CLOCK : 0;
flush_cache_all();
outer_disable();
at91_suspend_sram_fn(pmc, at91_ramc_base[0],
at91_ramc_base[1], pm_data);
at91_suspend_sram_fn(&pm_data);
outer_resume();
}
......@@ -224,12 +205,6 @@ static struct platform_device at91_cpuidle_device = {
.name = "cpuidle-at91",
};
static void at91_pm_set_standby(void (*at91_standby)(void))
{
if (at91_standby)
at91_cpuidle_device.dev.platform_data = at91_standby;
}
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
* terminate self-refresh automatically on the next SDRAM access.
......@@ -241,20 +216,15 @@ static void at91_pm_set_standby(void (*at91_standby)(void))
*/
static void at91rm9200_standby(void)
{
u32 lpr = at91_ramc_read(0, AT91_MC_SDRAMC_LPR);
asm volatile(
"b 1f\n\t"
".align 5\n\t"
"1: mcr p15, 0, %0, c7, c10, 4\n\t"
" str %0, [%1, %2]\n\t"
" str %3, [%1, %4]\n\t"
" str %2, [%1, %3]\n\t"
" mcr p15, 0, %0, c7, c0, 4\n\t"
" str %5, [%1, %2]"
:
: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91_MC_SDRAMC_LPR),
"r" (1), "r" (AT91_MC_SDRAMC_SRR),
"r" (lpr));
: "r" (0), "r" (pm_data.ramc[0]),
"r" (1), "r" (AT91_MC_SDRAMC_SRR));
}
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
......@@ -265,12 +235,27 @@ static void at91_ddr_standby(void)
/* Those two values allow us to delay self-refresh activation
* to the maximum. */
u32 lpr0, lpr1 = 0;
u32 mdr, saved_mdr0, saved_mdr1 = 0;
u32 saved_lpr0, saved_lpr1 = 0;
if (at91_ramc_base[1]) {
/* LPDDR1 --> force DDR2 mode during self-refresh */
saved_mdr0 = at91_ramc_read(0, AT91_DDRSDRC_MDR);
if ((saved_mdr0 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
mdr = saved_mdr0 & ~AT91_DDRSDRC_MD;
mdr |= AT91_DDRSDRC_MD_DDR2;
at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr);
}
if (pm_data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
saved_mdr1 = at91_ramc_read(1, AT91_DDRSDRC_MDR);
if ((saved_mdr1 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
mdr = saved_mdr1 & ~AT91_DDRSDRC_MD;
mdr |= AT91_DDRSDRC_MD_DDR2;
at91_ramc_write(1, AT91_DDRSDRC_MDR, mdr);
}
}
saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
......@@ -279,14 +264,17 @@ static void at91_ddr_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
if (at91_ramc_base[1])
if (pm_data.ramc[1])
at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0);
at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
if (at91_ramc_base[1])
if (pm_data.ramc[1]) {
at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1);
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}
}
static void sama5d3_ddr_standby(void)
......@@ -313,7 +301,7 @@ static void at91sam9_sdram_standby(void)
u32 lpr0, lpr1 = 0;
u32 saved_lpr0, saved_lpr1 = 0;
if (at91_ramc_base[1]) {
if (pm_data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
......@@ -325,21 +313,33 @@ static void at91sam9_sdram_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
if (at91_ramc_base[1])
if (pm_data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
if (at91_ramc_base[1])
if (pm_data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
}
struct ramc_info {
void (*idle)(void);
unsigned int memctrl;
};
static const struct ramc_info ramc_infos[] __initconst = {
{ .idle = at91rm9200_standby, .memctrl = AT91_MEMCTRL_MC},
{ .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
{ .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
};
static const struct of_device_id const ramc_ids[] __initconst = {
{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
{ .compatible = "atmel,sama5d3-ddramc", .data = sama5d3_ddr_standby },
{ .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] },
{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
{ .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
{ /*sentinel*/ }
};
......@@ -348,15 +348,18 @@ static __init void at91_dt_ramc(void)
struct device_node *np;
const struct of_device_id *of_id;
int idx = 0;
const void *standby = NULL;
void *standby = NULL;
const struct ramc_info *ramc;
for_each_matching_node_and_match(np, ramc_ids, &of_id) {
at91_ramc_base[idx] = of_iomap(np, 0);
if (!at91_ramc_base[idx])
pm_data.ramc[idx] = of_iomap(np, 0);
if (!pm_data.ramc[idx])
panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
ramc = of_id->data;
if (!standby)
standby = of_id->data;
standby = ramc->idle;
pm_data.memctrl = ramc->memctrl;
idx++;
}
......@@ -369,7 +372,7 @@ static __init void at91_dt_ramc(void)
return;
}
at91_pm_set_standby(standby);
at91_cpuidle_device.dev.platform_data = standby;
}
static void at91rm9200_idle(void)
......@@ -378,12 +381,12 @@ static void at91rm9200_idle(void)
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
}
static void at91sam9_idle(void)
{
writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
cpu_do_idle();
}
......@@ -433,31 +436,46 @@ static void __init at91_pm_sram_init(void)
&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
}
struct pmc_info {
unsigned long uhp_udp_mask;
};
static const struct pmc_info pmc_infos[] __initconst = {
{ .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP },
{ .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP },
{ .uhp_udp_mask = AT91SAM926x_PMC_UHP },
};
static const struct of_device_id atmel_pmc_ids[] __initconst = {
{ .compatible = "atmel,at91rm9200-pmc" },
{ .compatible = "atmel,at91sam9260-pmc" },
{ .compatible = "atmel,at91sam9g45-pmc" },
{ .compatible = "atmel,at91sam9n12-pmc" },
{ .compatible = "atmel,at91sam9x5-pmc" },
{ .compatible = "atmel,sama5d3-pmc" },
{ .compatible = "atmel,sama5d2-pmc" },
{ .compatible = "atmel,at91rm9200-pmc", .data = &pmc_infos[0] },
{ .compatible = "atmel,at91sam9260-pmc", .data = &pmc_infos[1] },
{ .compatible = "atmel,at91sam9g45-pmc", .data = &pmc_infos[2] },
{ .compatible = "atmel,at91sam9n12-pmc", .data = &pmc_infos[1] },
{ .compatible = "atmel,at91sam9x5-pmc", .data = &pmc_infos[1] },
{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
{ /* sentinel */ },
};
static void __init at91_pm_init(void (*pm_idle)(void))
{
struct device_node *pmc_np;
const struct of_device_id *of_id;
const struct pmc_info *pmc;
if (at91_cpuidle_device.dev.platform_data)
platform_device_register(&at91_cpuidle_device);
pmc_np = of_find_matching_node(NULL, atmel_pmc_ids);
pmc = of_iomap(pmc_np, 0);
if (!pmc) {
pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
pm_data.pmc = of_iomap(pmc_np, 0);
if (!pm_data.pmc) {
pr_err("AT91: PM not supported, PMC not found\n");
return;
}
pmc = of_id->data;
pm_data.uhp_udp_mask = pmc->uhp_udp_mask;
if (pm_idle)
arm_pm_idle = pm_idle;
......@@ -478,40 +496,17 @@ void __init at91rm9200_pm_init(void)
*/
at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
at91_pm_data.memctrl = AT91_MEMCTRL_MC;
at91_pm_init(at91rm9200_idle);
}
void __init at91sam9260_pm_init(void)
{
at91_dt_ramc();
at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
at91_pm_init(at91sam9_idle);
}
void __init at91sam9g45_pm_init(void)
{
at91_dt_ramc();
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
at91_pm_init(at91sam9_idle);
}
void __init at91sam9x5_pm_init(void)
void __init at91sam9_pm_init(void)
{
at91_dt_ramc();
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
at91_pm_init(at91sam9_idle);
}
void __init sama5_pm_init(void)
{
at91_dt_ramc();
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
at91_pm_init(NULL);
}
arch/arm/mach-at91/pm.h
View file @ 8d648aad
......@@ -17,24 +17,20 @@
#include <soc/at91/at91sam9_ddrsdr.h>
#include <soc/at91/at91sam9_sdramc.h>
#ifndef __ASSEMBLY__
#define at91_ramc_read(id, field) \
__raw_readl(at91_ramc_base[id] + field)
#define at91_ramc_write(id, field, value) \
__raw_writel(value, at91_ramc_base[id] + field)
#endif
#define AT91_MEMCTRL_MC 0
#define AT91_MEMCTRL_SDRAMC 1
#define AT91_MEMCTRL_DDRSDR 2
#define AT91_PM_MEMTYPE_MASK 0x0f
#define AT91_PM_MODE_OFFSET 4
#define AT91_PM_MODE_MASK 0x01
#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
#define AT91_PM_SLOW_CLOCK 0x01
#ifndef __ASSEMBLY__
struct at91_pm_data {
void __iomem *pmc;
void __iomem *ramc[2];
unsigned long uhp_udp_mask;
unsigned int memctrl;
unsigned int mode;
};
#endif
#endif
arch/arm/mach-at91/pm_data-offsets.c 0 → 100644
View file @ 8d648aad
#include <linux/stddef.h>
#include <linux/kbuild.h>
#include "pm.h"
int main(void)
{
DEFINE(PM_DATA_PMC, offsetof(struct at91_pm_data, pmc));
DEFINE(PM_DATA_RAMC0, offsetof(struct at91_pm_data, ramc[0]));
DEFINE(PM_DATA_RAMC1, offsetof(struct at91_pm_data, ramc[1]));
DEFINE(PM_DATA_MEMCTRL, offsetof(struct at91_pm_data, memctrl));
DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode));
return 0;
}
arch/arm/mach-at91/pm_suspend.S
View file @ 8d648aad
......@@ -4,7 +4,7 @@
* Copyright (C) 2006 Savin Zlobec
*
* AT91SAM9 support:
* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -14,6 +14,7 @@
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
#include "pm.h"
#include "generated/at91_pm_data-offsets.h"
#define SRAMC_SELF_FRESH_ACTIVE 0x01
#define SRAMC_SELF_FRESH_EXIT 0x00
......@@ -72,13 +73,9 @@ tmp2 .req r5
.arm
/*
* void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
* void __iomem *ramc1, int memctrl)
* void at91_suspend_sram_fn(struct at91_pm_data*)
* @input param:
* @r0: base address of AT91_PMC
* @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
* @r2: base address of second SDRAM Controller or 0 if not present
* @r3: pm information
* @r0: base address of struct at91_pm_data
*/
/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
.align 3
......@@ -90,16 +87,16 @@ ENTRY(at91_pm_suspend_in_sram)
mov tmp1, #0
mcr p15, 0, tmp1, c7, c10, 4
str r0, .pmc_base
str r1, .sramc_base
str r2, .sramc1_base
and r0, r3, #AT91_PM_MEMTYPE_MASK
str r0, .memtype
lsr r0, r3, #AT91_PM_MODE_OFFSET
and r0, r0, #AT91_PM_MODE_MASK
str r0, .pm_mode
ldr tmp1, [r0, #PM_DATA_PMC]
str tmp1, .pmc_base
ldr tmp1, [r0, #PM_DATA_RAMC0]
str tmp1, .sramc_base
ldr tmp1, [r0, #PM_DATA_RAMC1]
str tmp1, .sramc1_base
ldr tmp1, [r0, #PM_DATA_MEMCTRL]
str tmp1, .memtype
ldr tmp1, [r0, #PM_DATA_MODE]
str tmp1, .pm_mode
/* Active the self-refresh mode */
mov r0, #SRAMC_SELF_FRESH_ACTIVE
......
arch/arm/mach-at91/sama5.c
View file @ 8d648aad
......@@ -15,60 +15,10 @@
#include <asm/system_misc.h>
#include "generic.h"
#include "soc.h"
static const struct at91_soc sama5_socs[] = {
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
"sama5d21", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH,
"sama5d22", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH,
"sama5d23", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH,
"sama5d24", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CU_EXID_MATCH,
"sama5d24", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D26CU_EXID_MATCH,
"sama5d26", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CU_EXID_MATCH,
"sama5d27", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH,
"sama5d27", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH,
"sama5d28", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH,
"sama5d28", "sama5d2"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
"sama5d31", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
"sama5d33", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
"sama5d34", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
"sama5d35", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
"sama5d36", "sama5d3"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
"sama5d41", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
"sama5d42", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
"sama5d43", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
"sama5d44", "sama5d4"),
{ /* sentinel */ },
};
static void __init sama5_dt_device_init(void)
{
struct soc_device *soc;
struct device *soc_dev = NULL;
soc = at91_soc_init(sama5_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_default_populate(NULL, NULL, soc_dev);
of_platform_default_populate(NULL, NULL, NULL);
sama5_pm_init();
}
......
arch/arm/mach-bcm/Kconfig
View file @ 8d648aad
......@@ -198,7 +198,9 @@ config ARCH_BRCMSTB
select HAVE_ARM_ARCH_TIMER
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ZONE_DMA if ARM_LPAE
select SOC_BRCMSTB
select SOC_BUS
help
......
arch/arm/mach-davinci/board-da850-evm.c
View file @ 8d648aad
......@@ -828,6 +828,9 @@ static struct regulator_consumer_supply fixed_supplies[] = {
/* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */
REGULATOR_SUPPLY("DVDD", "1-0018"),
/* UI card 3.3V: 5V -> TPS73701DCQ -> 3.3V */
REGULATOR_SUPPLY("vcc", "1-0020"),
};
/* TPS65070 voltage regulator support */
......@@ -1213,6 +1216,7 @@ static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
static struct vpif_capture_config da850_vpif_capture_config = {
.subdev_info = da850_vpif_capture_sdev_info,
.subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
.i2c_adapter_id = 1,
.chan_config[0] = {
.inputs = da850_ch0_inputs,
.input_count = ARRAY_SIZE(da850_ch0_inputs),
......
arch/arm/mach-davinci/board-dm644x-evm.c
View file @ 8d648aad
......@@ -744,7 +744,8 @@ static int davinci_phy_fixup(struct phy_device *phydev)
return 0;
}
#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
IS_ENABLED(CONFIG_PATA_BK3710))
#define HAS_NOR IS_ENABLED(CONFIG_MTD_PHYSMAP)
......
arch/arm/mach-davinci/board-dm646x-evm.c
View file @ 8d648aad
......@@ -119,7 +119,8 @@ static struct platform_device davinci_nand_device = {
},
};
#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
IS_ENABLED(CONFIG_PATA_BK3710))
#ifdef CONFIG_I2C
/* CPLD Register 0 bits to control ATA */
......
arch/arm/mach-davinci/board-neuros-osd2.c
View file @ 8d648aad
......@@ -163,7 +163,8 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
.wires = 4,
};
#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
IS_ENABLED(CONFIG_PATA_BK3710))
#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
......
arch/arm/mach-davinci/da830.c
View file @ 8d648aad
......@@ -304,6 +304,11 @@ static struct clk usb20_clk = {
.gpsc = 1,
};
static struct clk cppi41_clk = {
.name = "cppi41",
.parent = &usb20_clk,
};
static struct clk aemif_clk = {
.name = "aemif",
.parent = &pll0_sysclk3,
......@@ -413,6 +418,7 @@ static struct clk_lookup da830_clks[] = {
CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
CLK("davinci-mcasp.2", NULL, &mcasp2_clk),
CLK("musb-da8xx", "usb20", &usb20_clk),
CLK("cppi41-dmaengine", NULL, &cppi41_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "aintc", &aintc_clk),
CLK(NULL, "secu_mgr", &secu_mgr_clk),
......
arch/arm/mach-davinci/da850.c
View file @ 8d648aad
......@@ -401,6 +401,11 @@ static struct clk usb20_clk = {
.gpsc = 1,
};
static struct clk cppi41_clk = {
.name = "cppi41",
.parent = &usb20_clk,
};
static struct clk spi0_clk = {
.name = "spi0",
.parent = &pll0_sysclk2,
......@@ -560,6 +565,7 @@ static struct clk_lookup da850_clks[] = {
CLK("davinci-nand.0", "aemif", &aemif_nand_clk),
CLK("ohci-da8xx", "usb11", &usb11_clk),
CLK("musb-da8xx", "usb20", &usb20_clk),
CLK("cppi41-dmaengine", NULL, &cppi41_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("vpif", NULL, &vpif_clk),
......
arch/arm/mach-davinci/da8xx-dt.c
View file @ 8d648aad
......@@ -53,6 +53,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL),
OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL),
OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL),
OF_DEV_AUXDATA("ti,da850-vpif", 0x01e17000, "vpif", NULL),
{}
};
......
arch/arm/mach-davinci/pdata-quirks.c
View file @ 8d648aad
......@@ -10,26 +10,202 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <media/i2c/tvp514x.h>
#include <media/i2c/adv7343.h>
#include <mach/common.h>
#include <mach/da8xx.h>
struct pdata_init {
const char *compatible;
void (*fn)(void);
};
#define TVP5147_CH0 "tvp514x-0"
#define TVP5147_CH1 "tvp514x-1"
/* VPIF capture configuration */
static struct tvp514x_platform_data tvp5146_pdata = {
.clk_polarity = 0,
.hs_polarity = 1,
.vs_polarity = 1,
};
#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
static const struct vpif_input da850_ch0_inputs[] = {
{
.input = {
.index = 0,
.name = "Composite",
.type = V4L2_INPUT_TYPE_CAMERA,
.capabilities = V4L2_IN_CAP_STD,
.std = TVP514X_STD_ALL,
},
.input_route = INPUT_CVBS_VI2B,
.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
.subdev_name = TVP5147_CH0,
},
};
static const struct vpif_input da850_ch1_inputs[] = {
{
.input = {
.index = 0,
.name = "S-Video",
.type = V4L2_INPUT_TYPE_CAMERA,
.capabilities = V4L2_IN_CAP_STD,
.std = TVP514X_STD_ALL,
},
.input_route = INPUT_SVIDEO_VI2C_VI1C,
.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
.subdev_name = TVP5147_CH1,
},
};
static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
{
.name = TVP5147_CH0,
.board_info = {
I2C_BOARD_INFO("tvp5146", 0x5d),
.platform_data = &tvp5146_pdata,
},
},
{
.name = TVP5147_CH1,
.board_info = {
I2C_BOARD_INFO("tvp5146", 0x5c),
.platform_data = &tvp5146_pdata,
},
},
};
static struct vpif_capture_config da850_vpif_capture_config = {
.subdev_info = da850_vpif_capture_sdev_info,
.subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
.chan_config[0] = {
.inputs = da850_ch0_inputs,
.input_count = ARRAY_SIZE(da850_ch0_inputs),
.vpif_if = {
.if_type = VPIF_IF_BT656,
.hd_pol = 1,
.vd_pol = 1,
.fid_pol = 0,
},
},
.chan_config[1] = {
.inputs = da850_ch1_inputs,
.input_count = ARRAY_SIZE(da850_ch1_inputs),
.vpif_if = {
.if_type = VPIF_IF_BT656,
.hd_pol = 1,
.vd_pol = 1,
.fid_pol = 0,
},
},
.card_name = "DA850/OMAP-L138 Video Capture",
};
static void __init da850_vpif_legacy_register_capture(void)
{
int ret;
ret = da850_register_vpif_capture(&da850_vpif_capture_config);
if (ret)
pr_warn("%s: VPIF capture setup failed: %d\n",
__func__, ret);
}
static void __init da850_vpif_capture_legacy_init_lcdk(void)
{
da850_vpif_capture_config.subdev_count = 1;
da850_vpif_legacy_register_capture();
}
static void __init da850_vpif_capture_legacy_init_evm(void)
{
da850_vpif_legacy_register_capture();
}
static struct adv7343_platform_data adv7343_pdata = {
.mode_config = {
.dac = { 1, 1, 1 },
},
.sd_config = {
.sd_dac_out = { 1 },
},
};
static struct vpif_subdev_info da850_vpif_subdev[] = {
{
.name = "adv7343",
.board_info = {
I2C_BOARD_INFO("adv7343", 0x2a),
.platform_data = &adv7343_pdata,
},
},
};
static const struct vpif_output da850_ch0_outputs[] = {
{
.output = {
.index = 0,
.name = "Composite",
.type = V4L2_OUTPUT_TYPE_ANALOG,
.capabilities = V4L2_OUT_CAP_STD,
.std = V4L2_STD_ALL,
},
.subdev_name = "adv7343",
.output_route = ADV7343_COMPOSITE_ID,
},
{
.output = {
.index = 1,
.name = "S-Video",
.type = V4L2_OUTPUT_TYPE_ANALOG,
.capabilities = V4L2_OUT_CAP_STD,
.std = V4L2_STD_ALL,
},
.subdev_name = "adv7343",
.output_route = ADV7343_SVIDEO_ID,
},
};
static struct vpif_display_config da850_vpif_display_config = {
.subdevinfo = da850_vpif_subdev,
.subdev_count = ARRAY_SIZE(da850_vpif_subdev),
.chan_config[0] = {
.outputs = da850_ch0_outputs,
.output_count = ARRAY_SIZE(da850_ch0_outputs),
},
.card_name = "DA850/OMAP-L138 Video Display",
};
static void __init da850_vpif_display_legacy_init_evm(void)
{
int ret;
ret = da850_register_vpif_display(&da850_vpif_display_config);
if (ret)
pr_warn("%s: VPIF display setup failed: %d\n",
__func__, ret);
}
static void pdata_quirks_check(struct pdata_init *quirks)
{
while (quirks->compatible) {
if (of_machine_is_compatible(quirks->compatible)) {
if (quirks->fn)
quirks->fn();
break;
}
quirks++;
}
}
static struct pdata_init pdata_quirks[] __initdata = {
{ "ti,da850-lcdk", da850_vpif_capture_legacy_init_lcdk, },
{ "ti,da850-evm", da850_vpif_display_legacy_init_evm, },
{ "ti,da850-evm", da850_vpif_capture_legacy_init_evm, },
{ /* sentinel */ },
};
......
arch/arm/mach-davinci/pm.c
View file @ 8d648aad
......@@ -108,7 +108,6 @@ static int davinci_pm_enter(suspend_state_t state)
int ret = 0;
switch (state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
davinci_pm_suspend();
break;
......
arch/arm/mach-gemini/Kconfig
View file @ 8d648aad
if ARCH_GEMINI
menu "Cortina Systems Gemini Implementations"
config MACH_NAS4220B
bool "Raidsonic NAS-4220-B"
select GEMINI_MEM_SWAP
help
Say Y here if you intend to run this kernel on a
Raidsonic NAS-4220-B.
config MACH_RUT100
bool "Teltonika RUT100"
select GEMINI_MEM_SWAP
help
Say Y here if you intend to run this kernel on a
Teltonika 3G Router RUT100.
config MACH_WBD111
bool "Wiliboard WBD-111"
select GEMINI_MEM_SWAP
help
Say Y here if you intend to run this kernel on a
Wiliboard WBD-111.
config MACH_WBD222
bool "Wiliboard WBD-222"
select GEMINI_MEM_SWAP
help
Say Y here if you intend to run this kernel on a
Wiliboard WBD-222.
endmenu
config GEMINI_MEM_SWAP
bool "Gemini memory is swapped"
help
Say Y here if Gemini memory is swapped by bootloader.
endif
menuconfig ARCH_GEMINI
bool "Cortina Systems Gemini"
depends on ARCH_MULTI_V4
select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
select FARADAY_FTINTC010
select FTTMR010_TIMER
select GPIO_FTGPIO010
select GPIOLIB
select POWER_RESET
select POWER_RESET_GEMINI_POWEROFF
select POWER_RESET_SYSCON
help
Support for the Cortina Systems Gemini family SoCs
arch/arm/mach-gemini/Makefile
View file @ 8d648aad
#
# Makefile for the linux kernel.
#
# Object file lists.
obj-y := irq.o mm.o time.o devices.o gpio.o idle.o reset.o
# Board-specific support
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
obj-$(CONFIG_MACH_WBD222) += board-wbd222.o
# Makefile for Cortina systems Gemini
obj-y := board-dt.o
arch/arm/mach-gemini/Makefile.boot deleted 100644 → 0
View file @ e07e368b
ifeq ($(CONFIG_GEMINI_MEM_SWAP),y)
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
else
zreladdr-y += 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x10800000
endif
arch/arm/mach-gemini/idle.c → arch/arm/mach-gemini/board-dt.c
View file @ 8d648aad
/*
* arch/arm/mach-gemini/idle.c
* Gemini Device Tree boot support
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <asm/proc-fns.h>
#ifdef CONFIG_DEBUG_GEMINI
/* This is needed for LL-debug/earlyprintk/debug-macro.S */
static struct map_desc gemini_io_desc[] __initdata = {
{
.virtual = CONFIG_DEBUG_UART_VIRT,
.pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
.length = SZ_4K,
.type = MT_DEVICE,
},
};
static void __init gemini_map_io(void)
{
iotable_init(gemini_io_desc, ARRAY_SIZE(gemini_io_desc));
}
#else
#define gemini_map_io NULL
#endif
static void gemini_idle(void)
{
/*
......@@ -22,10 +45,18 @@ static void gemini_idle(void)
cpu_do_idle();
}
static int __init gemini_idle_init(void)
static void __init gemini_init_machine(void)
{
arm_pm_idle = gemini_idle;
return 0;
}
arch_initcall(gemini_idle_init);
static const char *gemini_board_compat[] = {
"cortina,gemini",
NULL,
};
DT_MACHINE_START(GEMINI_DT, "Gemini (Device Tree)")
.map_io = gemini_map_io,
.init_machine = gemini_init_machine,
.dt_compat = gemini_board_compat,
MACHINE_END
arch/arm/mach-gemini/board-nas4220b.c deleted 100644 → 0
View file @ e07e368b
/*
* Support for Raidsonic NAS-4220-B
*
* Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
*
* based on rut1xx.c
* Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/io.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/global_reg.h>
#include "common.h"
static struct gpio_led ib4220b_leds[] = {
{
.name = "nas4220b:orange:hdd",
.default_trigger = "none",
.gpio = 60,
},
{
.name = "nas4220b:green:os",
.default_trigger = "heartbeat",
.gpio = 62,
},
};
static struct gpio_led_platform_data ib4220b_leds_data = {
.num_leds = ARRAY_SIZE(ib4220b_leds),
.leds = ib4220b_leds,
};
static struct platform_device ib4220b_led_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &ib4220b_leds_data,
},
};
static struct gpio_keys_button ib4220b_keys[] = {
{
.code = KEY_SETUP,
.gpio = 61,
.active_low = 1,
.desc = "Backup Button",
.type = EV_KEY,
},
{
.code = KEY_RESTART,
.gpio = 63,
.active_low = 1,
.desc = "Softreset Button",
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data ib4220b_keys_data = {
.buttons = ib4220b_keys,
.nbuttons = ARRAY_SIZE(ib4220b_keys),
};
static struct platform_device ib4220b_key_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &ib4220b_keys_data,
},
};
static void __init ib4220b_init(void)
{
gemini_gpio_init();
platform_register_uart();
platform_register_pflash(SZ_16M, NULL, 0);
platform_device_register(&ib4220b_led_device);
platform_device_register(&ib4220b_key_device);
platform_register_rtc();
}
MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
.atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.init_time = gemini_timer_init,
.init_machine = ib4220b_init,
.restart = gemini_restart,
MACHINE_END
arch/arm/mach-gemini/board-rut1xx.c deleted 100644 → 0
View file @ e07e368b
/*
* Support for Teltonika RUT1xx
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
static struct gpio_keys_button rut1xx_keys[] = {
{
.code = KEY_SETUP,
.gpio = 60,
.active_low = 1,
.desc = "Reset to defaults",
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data rut1xx_keys_data = {
.buttons = rut1xx_keys,
.nbuttons = ARRAY_SIZE(rut1xx_keys),
};
static struct platform_device rut1xx_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &rut1xx_keys_data,
},
};
static struct gpio_led rut100_leds[] = {
{
.name = "Power",
.default_trigger = "heartbeat",
.gpio = 17,
},
{
.name = "GSM",
.default_trigger = "default-on",
.gpio = 7,
.active_low = 1,
},
};
static struct gpio_led_platform_data rut100_leds_data = {
.num_leds = ARRAY_SIZE(rut100_leds),
.leds = rut100_leds,
};
static struct platform_device rut1xx_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &rut100_leds_data,
},
};
static void __init rut1xx_init(void)
{
gemini_gpio_init();
platform_register_uart();
platform_register_pflash(SZ_8M, NULL, 0);
platform_device_register(&rut1xx_leds);
platform_device_register(&rut1xx_keys_device);
platform_register_rtc();
}
MACHINE_START(RUT100, "Teltonika RUT100")
.atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.init_time = gemini_timer_init,
.init_machine = rut1xx_init,
.restart = gemini_restart,
MACHINE_END
arch/arm/mach-gemini/board-wbd111.c deleted 100644 → 0
View file @ e07e368b
/*
* Support for Wiliboard WBD-111
*
* Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/skbuff.h>
#include <linux/gpio_keys.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
static struct gpio_keys_button wbd111_keys[] = {
{
.code = KEY_SETUP,
.gpio = 5,
.active_low = 1,
.desc = "reset",
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data wbd111_keys_data = {
.buttons = wbd111_keys,
.nbuttons = ARRAY_SIZE(wbd111_keys),
};
static struct platform_device wbd111_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &wbd111_keys_data,
},
};
static struct gpio_led wbd111_leds[] = {
{
.name = "L3red",
.gpio = 1,
},
{
.name = "L4green",
.gpio = 2,
},
{
.name = "L4red",
.gpio = 3,
},
{
.name = "L3green",
.gpio = 5,
},
};
static struct gpio_led_platform_data wbd111_leds_data = {
.num_leds = ARRAY_SIZE(wbd111_leds),
.leds = wbd111_leds,
};
static struct platform_device wbd111_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &wbd111_leds_data,
},
};
static struct mtd_partition wbd111_partitions[] = {
{
.name = "RedBoot",
.offset = 0,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "kernel",
.offset = 0x020000,
.size = 0x100000,
} , {
.name = "rootfs",
.offset = 0x120000,
.size = 0x6a0000,
} , {
.name = "VCTL",
.offset = 0x7c0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "cfg",
.offset = 0x7d0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "FIS",
.offset = 0x7e0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}
};
#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions)
static void __init wbd111_init(void)
{
gemini_gpio_init();
platform_register_uart();
platform_register_pflash(SZ_8M, wbd111_partitions,
wbd111_num_partitions);
platform_device_register(&wbd111_leds_device);
platform_device_register(&wbd111_keys_device);
platform_register_rtc();
}
MACHINE_START(WBD111, "Wiliboard WBD-111")
.atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.init_time = gemini_timer_init,
.init_machine = wbd111_init,
.restart = gemini_restart,
MACHINE_END
arch/arm/mach-gemini/board-wbd222.c deleted 100644 → 0
View file @ e07e368b
/*
* Support for Wiliboard WBD-222
*
* Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/skbuff.h>
#include <linux/gpio_keys.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
static struct gpio_keys_button wbd222_keys[] = {
{
.code = KEY_SETUP,
.gpio = 5,
.active_low = 1,
.desc = "reset",
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data wbd222_keys_data = {
.buttons = wbd222_keys,
.nbuttons = ARRAY_SIZE(wbd222_keys),
};
static struct platform_device wbd222_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &wbd222_keys_data,
},
};
static struct gpio_led wbd222_leds[] = {
{
.name = "L3red",
.gpio = 1,
},
{
.name = "L4green",
.gpio = 2,
},
{
.name = "L4red",
.gpio = 3,
},
{
.name = "L3green",
.gpio = 5,
},
};
static struct gpio_led_platform_data wbd222_leds_data = {
.num_leds = ARRAY_SIZE(wbd222_leds),
.leds = wbd222_leds,
};
static struct platform_device wbd222_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &wbd222_leds_data,
},
};
static struct mtd_partition wbd222_partitions[] = {
{
.name = "RedBoot",
.offset = 0,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "kernel",
.offset = 0x020000,
.size = 0x100000,
} , {
.name = "rootfs",
.offset = 0x120000,
.size = 0x6a0000,
} , {
.name = "VCTL",
.offset = 0x7c0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "cfg",
.offset = 0x7d0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
} , {
.name = "FIS",
.offset = 0x7e0000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}
};
#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions)
static void __init wbd222_init(void)
{
gemini_gpio_init();
platform_register_uart();
platform_register_pflash(SZ_8M, wbd222_partitions,
wbd222_num_partitions);
platform_device_register(&wbd222_leds_device);
platform_device_register(&wbd222_keys_device);
platform_register_rtc();
}
MACHINE_START(WBD222, "Wiliboard WBD-222")
.atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.init_time = gemini_timer_init,
.init_machine = wbd222_init,
.restart = gemini_restart,
MACHINE_END
arch/arm/mach-gemini/common.h deleted 100644 → 0
View file @ e07e368b
/*
* Common Gemini architecture functions
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __GEMINI_COMMON_H__
#define __GEMINI_COMMON_H__
#include <linux/reboot.h>
struct mtd_partition;
extern void gemini_map_io(void);
extern void gemini_init_irq(void);
extern void gemini_timer_init(void);
extern void gemini_gpio_init(void);
extern void platform_register_rtc(void);
/* Common platform devices registration functions */
extern int platform_register_uart(void);
extern int platform_register_pflash(unsigned int size,
struct mtd_partition *parts,
unsigned int nr_parts);
extern void gemini_restart(enum reboot_mode mode, const char *cmd);
#endif /* __GEMINI_COMMON_H__ */
arch/arm/mach-gemini/devices.c deleted 100644 → 0
View file @ e07e368b
/*
* Common devices definition for Gemini
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/global_reg.h>
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)IO_ADDRESS(GEMINI_UART_BASE),
.mapbase = GEMINI_UART_BASE,
.irq = IRQ_UART,
.uartclk = UART_CLK,
.regshift = 2,
.iotype = UPIO_MEM,
.type = PORT_16550A,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_FIXED_TYPE,
},
{},
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
};
int platform_register_uart(void)
{
return platform_device_register(&serial_device);
}
static struct resource flash_resource = {
.start = GEMINI_FLASH_BASE,
.flags = IORESOURCE_MEM,
};
static struct physmap_flash_data pflash_platform_data = {};
static struct platform_device pflash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &pflash_platform_data,
},
.resource = &flash_resource,
.num_resources = 1,
};
int platform_register_pflash(unsigned int size, struct mtd_partition *parts,
unsigned int nr_parts)
{
unsigned int reg;
reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_STATUS);
if ((reg & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL)
return -ENXIO;
if (reg & FLASH_WIDTH_16BIT)
pflash_platform_data.width = 2;
else
pflash_platform_data.width = 1;
/* enable parallel flash pins and disable others */
reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
reg &= ~PFLASH_PADS_DISABLE;
reg |= SFLASH_PADS_DISABLE | NAND_PADS_DISABLE;
__raw_writel(reg, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
flash_resource.end = flash_resource.start + size - 1;
pflash_platform_data.parts = parts;
pflash_platform_data.nr_parts = nr_parts;
return platform_device_register(&pflash_device);
}
static struct resource gemini_rtc_resources[] = {
[0] = {
.start = GEMINI_RTC_BASE,
.end = GEMINI_RTC_BASE + 0x24,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_RTC,
.end = IRQ_RTC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device gemini_rtc_device = {
.name = "rtc-gemini",
.id = 0,
.num_resources = ARRAY_SIZE(gemini_rtc_resources),
.resource = gemini_rtc_resources,
};
int __init platform_register_rtc(void)
{
return platform_device_register(&gemini_rtc_device);
}
arch/arm/mach-gemini/gpio.c deleted 100644 → 0
View file @ e07e368b
/*
* Gemini gpiochip and interrupt routines
*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* Based on plat-mxc/gpio.c:
* MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/gpio/driver.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x))
#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
/* GPIO registers definition */
#define GPIO_DATA_OUT 0x0
#define GPIO_DATA_IN 0x4
#define GPIO_DIR 0x8
#define GPIO_DATA_SET 0x10
#define GPIO_DATA_CLR 0x14
#define GPIO_PULL_EN 0x18
#define GPIO_PULL_TYPE 0x1C
#define GPIO_INT_EN 0x20
#define GPIO_INT_STAT 0x24
#define GPIO_INT_MASK 0x2C
#define GPIO_INT_CLR 0x30
#define GPIO_INT_TYPE 0x34
#define GPIO_INT_BOTH_EDGE 0x38
#define GPIO_INT_LEVEL 0x3C
#define GPIO_DEBOUNCE_EN 0x40
#define GPIO_DEBOUNCE_PRESCALE 0x44
#define GPIO_PORT_NUM 3
static void _set_gpio_irqenable(void __iomem *base, unsigned int index,
int enable)
{
unsigned int reg;
reg = __raw_readl(base + GPIO_INT_EN);
reg = (reg & (~(1 << index))) | (!!enable << index);
__raw_writel(reg, base + GPIO_INT_EN);
}
static void gpio_ack_irq(struct irq_data *d)
{
unsigned int gpio = irq_to_gpio(d->irq);
void __iomem *base = GPIO_BASE(gpio / 32);
__raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
}
static void gpio_mask_irq(struct irq_data *d)
{
unsigned int gpio = irq_to_gpio(d->irq);
void __iomem *base = GPIO_BASE(gpio / 32);
_set_gpio_irqenable(base, gpio % 32, 0);
}
static void gpio_unmask_irq(struct irq_data *d)
{
unsigned int gpio = irq_to_gpio(d->irq);
void __iomem *base = GPIO_BASE(gpio / 32);
_set_gpio_irqenable(base, gpio % 32, 1);
}
static int gpio_set_irq_type(struct irq_data *d, unsigned int type)
{
unsigned int gpio = irq_to_gpio(d->irq);
unsigned int gpio_mask = 1 << (gpio % 32);
void __iomem *base = GPIO_BASE(gpio / 32);
unsigned int reg_both, reg_level, reg_type;
reg_type = __raw_readl(base + GPIO_INT_TYPE);
reg_level = __raw_readl(base + GPIO_INT_LEVEL);
reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
reg_type &= ~gpio_mask;
reg_both |= gpio_mask;
break;
case IRQ_TYPE_EDGE_RISING:
reg_type &= ~gpio_mask;
reg_both &= ~gpio_mask;
reg_level &= ~gpio_mask;
break;
case IRQ_TYPE_EDGE_FALLING:
reg_type &= ~gpio_mask;
reg_both &= ~gpio_mask;
reg_level |= gpio_mask;
break;
case IRQ_TYPE_LEVEL_HIGH:
reg_type |= gpio_mask;
reg_level &= ~gpio_mask;
break;
case IRQ_TYPE_LEVEL_LOW:
reg_type |= gpio_mask;
reg_level |= gpio_mask;
break;
default:
return -EINVAL;
}
__raw_writel(reg_type, base + GPIO_INT_TYPE);
__raw_writel(reg_level, base + GPIO_INT_LEVEL);
__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
gpio_ack_irq(d);
return 0;
}
static void gpio_irq_handler(struct irq_desc *desc)
{
unsigned int port = (unsigned int)irq_desc_get_handler_data(desc);
unsigned int gpio_irq_no, irq_stat;
irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT);
gpio_irq_no = GPIO_IRQ_BASE + port * 32;
for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
if ((irq_stat & 1) == 0)
continue;
generic_handle_irq(gpio_irq_no);
}
}
static struct irq_chip gpio_irq_chip = {
.name = "GPIO",
.irq_ack = gpio_ack_irq,
.irq_mask = gpio_mask_irq,
.irq_unmask = gpio_unmask_irq,
.irq_set_type = gpio_set_irq_type,
};
static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
int dir)
{
void __iomem *base = GPIO_BASE(offset / 32);
unsigned int reg;
reg = __raw_readl(base + GPIO_DIR);
if (dir)
reg |= 1 << (offset % 32);
else
reg &= ~(1 << (offset % 32));
__raw_writel(reg, base + GPIO_DIR);
}
static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
void __iomem *base = GPIO_BASE(offset / 32);
if (value)
__raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
else
__raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR);
}
static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
{
void __iomem *base = GPIO_BASE(offset / 32);
return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
}
static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
_set_gpio_direction(chip, offset, 0);
return 0;
}
static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
_set_gpio_direction(chip, offset, 1);
gemini_gpio_set(chip, offset, value);
return 0;
}
static struct gpio_chip gemini_gpio_chip = {
.label = "Gemini",
.direction_input = gemini_gpio_direction_input,
.get = gemini_gpio_get,
.direction_output = gemini_gpio_direction_output,
.set = gemini_gpio_set,
.base = 0,
.ngpio = GPIO_PORT_NUM * 32,
};
void __init gemini_gpio_init(void)
{
int i, j;
for (i = 0; i < GPIO_PORT_NUM; i++) {
/* disable, unmask and clear all interrupts */
__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN);
__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK);
__raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR);
for (j = GPIO_IRQ_BASE + i * 32;
j < GPIO_IRQ_BASE + (i + 1) * 32; j++) {
irq_set_chip_and_handler(j, &gpio_irq_chip,
handle_edge_irq);
irq_clear_status_flags(j, IRQ_NOREQUEST);
}
irq_set_chained_handler_and_data(IRQ_GPIO(i), gpio_irq_handler,
(void *)i);
}
BUG_ON(gpiochip_add_data(&gemini_gpio_chip, NULL));
}
arch/arm/mach-gemini/include/mach/entry-macro.S deleted 100644 → 0
View file @ e07e368b
/*
* Low-level IRQ helper macros for Gemini platform.
*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#define IRQ_STATUS 0x14
.macro get_irqnr_preamble, base, tmp
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
ldr \irqnr, [\irqstat]
cmp \irqnr, #0
beq 2313f
mov \tmp, \irqnr
mov \irqnr, #0
2312:
tst \tmp, #1
bne 2313f
add \irqnr, \irqnr, #1
mov \tmp, \tmp, lsr #1
cmp \irqnr, #31
bcc 2312b
2313:
.endm
arch/arm/mach-gemini/include/mach/global_reg.h deleted 100644 → 0
View file @ e07e368b
/*
* This file contains the hardware definitions for Gemini.
*
* Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_GLOBAL_REG_H
#define __MACH_GLOBAL_REG_H
/* Global Word ID Register*/
#define GLOBAL_ID 0x00
#define CHIP_ID(reg) ((reg) >> 8)
#define CHIP_REVISION(reg) ((reg) & 0xFF)
/* Global Status Register */
#define GLOBAL_STATUS 0x04
#define CPU_BIG_ENDIAN (1 << 31)
#define PLL_OSC_30M (1 << 30) /* else 60MHz */
#define OPERATION_MODE_MASK (0xF << 26)
#define OPM_IDDQ (0xF << 26)
#define OPM_NAND (0xE << 26)
#define OPM_RING (0xD << 26)
#define OPM_DIRECT_BOOT (0xC << 26)
#define OPM_USB1_PHY_TEST (0xB << 26)
#define OPM_USB0_PHY_TEST (0xA << 26)
#define OPM_SATA1_PHY_TEST (0x9 << 26)
#define OPM_SATA0_PHY_TEST (0x8 << 26)
#define OPM_ICE_ARM (0x7 << 26)
#define OPM_ICE_FARADAY (0x6 << 26)
#define OPM_PLL_BYPASS (0x5 << 26)
#define OPM_DEBUG (0x4 << 26)
#define OPM_BURN_IN (0x3 << 26)
#define OPM_MBIST (0x2 << 26)
#define OPM_SCAN (0x1 << 26)
#define OPM_REAL (0x0 << 26)
#define FLASH_TYPE_MASK (0x3 << 24)
#define FLASH_TYPE_NAND_2K (0x3 << 24)
#define FLASH_TYPE_NAND_512 (0x2 << 24)
#define FLASH_TYPE_PARALLEL (0x1 << 24)
#define FLASH_TYPE_SERIAL (0x0 << 24)
/* if parallel */
#define FLASH_WIDTH_16BIT (1 << 23) /* else 8 bit */
/* if serial */
#define FLASH_ATMEL (1 << 23) /* else STM */
#define FLASH_SIZE_MASK (0x3 << 21)
#define NAND_256M (0x3 << 21) /* and more */
#define NAND_128M (0x2 << 21)
#define NAND_64M (0x1 << 21)
#define NAND_32M (0x0 << 21)
#define ATMEL_16M (0x3 << 21) /* and more */
#define ATMEL_8M (0x2 << 21)
#define ATMEL_4M_2M (0x1 << 21)
#define ATMEL_1M (0x0 << 21) /* and less */
#define STM_32M (1 << 22) /* and more */
#define STM_16M (0 << 22) /* and less */
#define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */
#define CPU_AHB_RATIO_MASK (0x3 << 18)
#define CPU_AHB_1_1 (0x0 << 18)
#define CPU_AHB_3_2 (0x1 << 18)
#define CPU_AHB_24_13 (0x2 << 18)
#define CPU_AHB_2_1 (0x3 << 18)
#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130)
#define AHB_SPEED_TO_REG(x) ((((x - 130)) / 10) << 15)
/* it is posible to override some settings, use >> OVERRIDE_xxxx_SHIFT */
#define OVERRIDE_FLASH_TYPE_SHIFT 16
#define OVERRIDE_FLASH_WIDTH_SHIFT 16
#define OVERRIDE_FLASH_SIZE_SHIFT 16
#define OVERRIDE_CPU_AHB_RATIO_SHIFT 15
#define OVERRIDE_AHB_SPEED_SHIFT 15
/* Global PLL Control Register */
#define GLOBAL_PLL_CTRL 0x08
#define PLL_BYPASS (1 << 31)
#define PLL_POWER_DOWN (1 << 8)
#define PLL_CONTROL_Q (0x1F << 0)
/* Global Soft Reset Control Register */
#define GLOBAL_RESET 0x0C
#define RESET_GLOBAL (1 << 31)
#define RESET_CPU1 (1 << 30)
#define RESET_TVE (1 << 28)
#define RESET_SATA1 (1 << 27)
#define RESET_SATA0 (1 << 26)
#define RESET_CIR (1 << 25)
#define RESET_EXT_DEV (1 << 24)
#define RESET_WD (1 << 23)
#define RESET_GPIO2 (1 << 22)
#define RESET_GPIO1 (1 << 21)
#define RESET_GPIO0 (1 << 20)
#define RESET_SSP (1 << 19)
#define RESET_UART (1 << 18)
#define RESET_TIMER (1 << 17)
#define RESET_RTC (1 << 16)
#define RESET_INT1 (1 << 15)
#define RESET_INT0 (1 << 14)
#define RESET_LCD (1 << 13)
#define RESET_LPC (1 << 12)
#define RESET_APB (1 << 11)
#define RESET_DMA (1 << 10)
#define RESET_USB1 (1 << 9)
#define RESET_USB0 (1 << 8)
#define RESET_PCI (1 << 7)
#define RESET_GMAC1 (1 << 6)
#define RESET_GMAC0 (1 << 5)
#define RESET_SECURITY (1 << 4)
#define RESET_RAID (1 << 3)
#define RESET_IDE (1 << 2)
#define RESET_FLASH (1 << 1)
#define RESET_DRAM (1 << 0)
/* Global IO Pad Driving Capability Control Register */
#define GLOBAL_IO_DRIVING_CTRL 0x10
#define DRIVING_CURRENT_MASK 0x3
/* here 00-4mA, 01-8mA, 10-12mA, 11-16mA */
#define GPIO1_PADS_31_28_SHIFT 28
#define GPIO0_PADS_31_16_SHIFT 26
#define GPIO0_PADS_15_0_SHIFT 24
#define PCI_AND_EXT_RESET_PADS_SHIFT 22
#define IDE_PADS_SHIFT 20
#define GMAC1_PADS_SHIFT 18
#define GMAC0_PADS_SHIFT 16
/* DRAM is not in mA and poorly documented */
#define DRAM_CLOCK_PADS_SHIFT 8
#define DRAM_DATA_PADS_SHIFT 4
#define DRAM_CONTROL_PADS_SHIFT 0
/* Global IO Pad Slew Rate Control Register */
#define GLOBAL_IO_SLEW_RATE_CTRL 0x14
#define GPIO1_PADS_31_28_SLOW (1 << 10)
#define GPIO0_PADS_31_16_SLOW (1 << 9)
#define GPIO0_PADS_15_0_SLOW (1 << 8)
#define PCI_PADS_SLOW (1 << 7)
#define IDE_PADS_SLOW (1 << 6)
#define GMAC1_PADS_SLOW (1 << 5)
#define GMAC0_PADS_SLOW (1 << 4)
#define DRAM_CLOCK_PADS_SLOW (1 << 1)
#define DRAM_IO_PADS_SLOW (1 << 0)
/*
* General skew control defines
* 16 steps, each step is around 0.2ns
*/
#define SKEW_MASK 0xF
/* Global IDE PAD Skew Control Register */
#define GLOBAL_IDE_SKEW_CTRL 0x18
#define IDE1_HOST_STROBE_DELAY_SHIFT 28
#define IDE1_DEVICE_STROBE_DELAY_SHIFT 24
#define IDE1_OUTPUT_IO_SKEW_SHIFT 20
#define IDE1_INPUT_IO_SKEW_SHIFT 16
#define IDE0_HOST_STROBE_DELAY_SHIFT 12
#define IDE0_DEVICE_STROBE_DELAY_SHIFT 8
#define IDE0_OUTPUT_IO_SKEW_SHIFT 4
#define IDE0_INPUT_IO_SKEW_SHIFT 0
/* Global GMAC Control Pad Skew Control Register */
#define GLOBAL_GMAC_CTRL_SKEW_CTRL 0x1C
#define GMAC1_TXC_SKEW_SHIFT 28
#define GMAC1_TXEN_SKEW_SHIFT 24
#define GMAC1_RXC_SKEW_SHIFT 20
#define GMAC1_RXDV_SKEW_SHIFT 16
#define GMAC0_TXC_SKEW_SHIFT 12
#define GMAC0_TXEN_SKEW_SHIFT 8
#define GMAC0_RXC_SKEW_SHIFT 4
#define GMAC0_RXDV_SKEW_SHIFT 0
/* Global GMAC0 Data PAD Skew Control Register */
#define GLOBAL_GMAC0_DATA_SKEW_CTRL 0x20
/* Global GMAC1 Data PAD Skew Control Register */
#define GLOBAL_GMAC1_DATA_SKEW_CTRL 0x24
#define GMAC_TXD_SKEW_SHIFT(x) (((x) * 4) + 16)
#define GMAC_RXD_SKEW_SHIFT(x) ((x) * 4)
/* CPU has two AHB busses. */
/* Global Arbitration0 Control Register */
#define GLOBAL_ARBITRATION0_CTRL 0x28
#define BOOT_CONTROLLER_HIGH_PRIO (1 << 3)
#define DMA_BUS1_HIGH_PRIO (1 << 2)
#define CPU0_HIGH_PRIO (1 << 0)
/* Global Arbitration1 Control Register */
#define GLOBAL_ARBITRATION1_CTRL 0x2C
#define TVE_HIGH_PRIO (1 << 9)
#define PCI_HIGH_PRIO (1 << 8)
#define USB1_HIGH_PRIO (1 << 7)
#define USB0_HIGH_PRIO (1 << 6)
#define GMAC1_HIGH_PRIO (1 << 5)
#define GMAC0_HIGH_PRIO (1 << 4)
#define SECURITY_HIGH_PRIO (1 << 3)
#define RAID_HIGH_PRIO (1 << 2)
#define IDE_HIGH_PRIO (1 << 1)
#define DMA_BUS2_HIGH_PRIO (1 << 0)
/* Common bits for both arbitration registers */
#define BURST_LENGTH_SHIFT 16
#define BURST_LENGTH_MASK (0x3F << 16)
/* Miscellaneous Control Register */
#define GLOBAL_MISC_CTRL 0x30
#define MEMORY_SPACE_SWAP (1 << 31)
#define USB1_PLUG_MINIB (1 << 30) /* else plug is mini-A */
#define USB0_PLUG_MINIB (1 << 29)
#define GMAC_GMII (1 << 28)
#define GMAC_1_ENABLE (1 << 27)
/* TODO: define ATA/SATA bits */
#define USB1_VBUS_ON (1 << 23)
#define USB0_VBUS_ON (1 << 22)
#define APB_CLKOUT_ENABLE (1 << 21)
#define TVC_CLKOUT_ENABLE (1 << 20)
#define EXT_CLKIN_ENABLE (1 << 19)
#define PCI_66MHZ (1 << 18) /* else 33 MHz */
#define PCI_CLKOUT_ENABLE (1 << 17)
#define LPC_CLKOUT_ENABLE (1 << 16)
#define USB1_WAKEUP_ON (1 << 15)
#define USB0_WAKEUP_ON (1 << 14)
/* TODO: define PCI idle detect bits */
#define TVC_PADS_ENABLE (1 << 9)
#define SSP_PADS_ENABLE (1 << 8)
#define LCD_PADS_ENABLE (1 << 7)
#define LPC_PADS_ENABLE (1 << 6)
#define PCI_PADS_ENABLE (1 << 5)
#define IDE_PADS_ENABLE (1 << 4)
#define DRAM_PADS_POWER_DOWN (1 << 3)
#define NAND_PADS_DISABLE (1 << 2)
#define PFLASH_PADS_DISABLE (1 << 1)
#define SFLASH_PADS_DISABLE (1 << 0)
/* Global Clock Control Register */
#define GLOBAL_CLOCK_CTRL 0x34
#define POWER_STATE_G0 (1 << 31)
#define POWER_STATE_S1 (1 << 30) /* else it is S3/S4 state */
#define SECURITY_APB_AHB (1 << 29)
/* else Security APB clk will be 0.75xAHB */
/* TODO: TVC clock divider */
#define PCI_CLKRUN_ENABLE (1 << 16)
#define BOOT_CLK_DISABLE (1 << 13)
#define TVC_CLK_DISABLE (1 << 12)
#define FLASH_CLK_DISABLE (1 << 11)
#define DDR_CLK_DISABLE (1 << 10)
#define PCI_CLK_DISABLE (1 << 9)
#define IDE_CLK_DISABLE (1 << 8)
#define USB1_CLK_DISABLE (1 << 7)
#define USB0_CLK_DISABLE (1 << 6)
#define SATA1_CLK_DISABLE (1 << 5)
#define SATA0_CLK_DISABLE (1 << 4)
#define GMAC1_CLK_DISABLE (1 << 3)
#define GMAC0_CLK_DISABLE (1 << 2)
#define SECURITY_CLK_DISABLE (1 << 1)
/* TODO: other registers definitions if needed */
#endif /* __MACH_GLOBAL_REG_H */
arch/arm/mach-gemini/include/mach/hardware.h deleted 100644 → 0
View file @ e07e368b
/*
* This file contains the hardware definitions for Gemini.
*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
/*
* Memory Map definitions
*/
#ifdef CONFIG_GEMINI_MEM_SWAP
# define GEMINI_DRAM_BASE 0x00000000
# define GEMINI_SRAM_BASE 0x70000000
#else
# define GEMINI_SRAM_BASE 0x00000000
# define GEMINI_DRAM_BASE 0x10000000
#endif
#define GEMINI_FLASH_BASE 0x30000000
#define GEMINI_GLOBAL_BASE 0x40000000
#define GEMINI_WAQTCHDOG_BASE 0x41000000
#define GEMINI_UART_BASE 0x42000000
#define GEMINI_TIMER_BASE 0x43000000
#define GEMINI_LCD_BASE 0x44000000
#define GEMINI_RTC_BASE 0x45000000
#define GEMINI_SATA_BASE 0x46000000
#define GEMINI_LPC_HOST_BASE 0x47000000
#define GEMINI_LPC_IO_BASE 0x47800000
#define GEMINI_INTERRUPT_BASE 0x48000000
/* TODO: Different interrupt controllers when SMP
* #define GEMINI_INTERRUPT0_BASE 0x48000000
* #define GEMINI_INTERRUPT1_BASE 0x49000000
*/
#define GEMINI_SSP_CTRL_BASE 0x4A000000
#define GEMINI_POWER_CTRL_BASE 0x4B000000
#define GEMINI_CIR_BASE 0x4C000000
#define GEMINI_GPIO_BASE(x) (0x4D000000 + (x) * 0x1000000)
#define GEMINI_PCI_IO_BASE 0x50000000
#define GEMINI_PCI_MEM_BASE 0x58000000
#define GEMINI_TOE_BASE 0x60000000
#define GEMINI_GMAC0_BASE 0x6000A000
#define GEMINI_GMAC1_BASE 0x6000E000
#define GEMINI_SECURITY_BASE 0x62000000
#define GEMINI_IDE0_BASE 0x63000000
#define GEMINI_IDE1_BASE 0x63400000
#define GEMINI_RAID_BASE 0x64000000
#define GEMINI_FLASH_CTRL_BASE 0x65000000
#define GEMINI_DRAM_CTRL_BASE 0x66000000
#define GEMINI_GENERAL_DMA_BASE 0x67000000
#define GEMINI_USB0_BASE 0x68000000
#define GEMINI_USB1_BASE 0x69000000
#define GEMINI_BIG_ENDIAN_BASE 0x80000000
/*
* UART Clock when System clk is 150MHz
*/
#define UART_CLK 48000000
/*
* macro to get at IO space when running virtually
*/
#define IO_ADDRESS(x) IOMEM((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
#endif
arch/arm/mach-gemini/include/mach/irqs.h deleted 100644 → 0
View file @ e07e368b
/*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_IRQS_H__
#define __MACH_IRQS_H__
#define IRQ_SERIRQ1 31
#define IRQ_SERIRQ0 30
#define IRQ_PCID 29
#define IRQ_PCIC 28
#define IRQ_PCIB 27
#define IRQ_PWR 26
#define IRQ_CIR 25
#define IRQ_GPIO(x) (22 + (x))
#define IRQ_SSP 21
#define IRQ_LPC 20
#define IRQ_LCD 19
#define IRQ_UART 18
#define IRQ_RTC 17
#define IRQ_TIMER3 16
#define IRQ_TIMER2 15
#define IRQ_TIMER1 14
#define IRQ_FLASH 12
#define IRQ_USB1 11
#define IRQ_USB0 10
#define IRQ_DMA 9
#define IRQ_PCI 8
#define IRQ_IPSEC 7
#define IRQ_RAID 6
#define IRQ_IDE1 5
#define IRQ_IDE0 4
#define IRQ_WATCHDOG 3
#define IRQ_GMAC1 2
#define IRQ_GMAC0 1
#define IRQ_IPI 0
#define NORMAL_IRQ_NUM 32
#define GPIO_IRQ_BASE NORMAL_IRQ_NUM
#define GPIO_IRQ_NUM (3 * 32)
#define ARCH_TIMER_IRQ IRQ_TIMER2
#define NR_IRQS (NORMAL_IRQ_NUM + GPIO_IRQ_NUM)
#endif /* __MACH_IRQS_H__ */
arch/arm/mach-gemini/include/mach/uncompress.h deleted 100644 → 0
View file @ e07e368b
/*
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* Based on mach-pxa/include/mach/uncompress.h:
* Copyright: (C) 2001 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_UNCOMPRESS_H
#define __MACH_UNCOMPRESS_H
#include <linux/serial_reg.h>
#include <mach/hardware.h>
static volatile unsigned long * const UART = (unsigned long *)GEMINI_UART_BASE;
/*
* The following code assumes the serial port has already been
* initialized by the bootloader. If you didn't setup a port in
* your bootloader then nothing will appear (which might be desired).
*/
static inline void putc(char c)
{
while (!(UART[UART_LSR] & UART_LSR_THRE))
barrier();
UART[UART_TX] = c;
}
static inline void flush(void)
{
}
/*
* nothing to do
*/
#define arch_decomp_setup()
#endif /* __MACH_UNCOMPRESS_H */
arch/arm/mach-gemini/irq.c deleted 100644 → 0
View file @ e07e368b
/*
* Interrupt routines for Gemini
*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/stddef.h>
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/cpu.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/system_misc.h>
#include <mach/hardware.h>
#define IRQ_SOURCE(base_addr) (base_addr + 0x00)
#define IRQ_MASK(base_addr) (base_addr + 0x04)
#define IRQ_CLEAR(base_addr) (base_addr + 0x08)
#define IRQ_TMODE(base_addr) (base_addr + 0x0C)
#define IRQ_TLEVEL(base_addr) (base_addr + 0x10)
#define IRQ_STATUS(base_addr) (base_addr + 0x14)
#define FIQ_SOURCE(base_addr) (base_addr + 0x20)
#define FIQ_MASK(base_addr) (base_addr + 0x24)
#define FIQ_CLEAR(base_addr) (base_addr + 0x28)
#define FIQ_TMODE(base_addr) (base_addr + 0x2C)
#define FIQ_LEVEL(base_addr) (base_addr + 0x30)
#define FIQ_STATUS(base_addr) (base_addr + 0x34)
static void gemini_ack_irq(struct irq_data *d)
{
__raw_writel(1 << d->irq, IRQ_CLEAR(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
}
static void gemini_mask_irq(struct irq_data *d)
{
unsigned int mask;
mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
mask &= ~(1 << d->irq);
__raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
}
static void gemini_unmask_irq(struct irq_data *d)
{
unsigned int mask;
mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
mask |= (1 << d->irq);
__raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
}
static struct irq_chip gemini_irq_chip = {
.name = "INTC",
.irq_ack = gemini_ack_irq,
.irq_mask = gemini_mask_irq,
.irq_unmask = gemini_unmask_irq,
};
static struct resource irq_resource = {
.name = "irq_handler",
.start = GEMINI_INTERRUPT_BASE,
.end = FIQ_STATUS(GEMINI_INTERRUPT_BASE) + 4,
};
void __init gemini_init_irq(void)
{
unsigned int i, mode = 0, level = 0;
/*
* Disable the idle handler by default since it is buggy
* For more info see arch/arm/mach-gemini/idle.c
*/
cpu_idle_poll_ctrl(true);
request_resource(&iomem_resource, &irq_resource);
for (i = 0; i < NR_IRQS; i++) {
irq_set_chip(i, &gemini_irq_chip);
if((i >= IRQ_TIMER1 && i <= IRQ_TIMER3) || (i >= IRQ_SERIRQ0 && i <= IRQ_SERIRQ1)) {
irq_set_handler(i, handle_edge_irq);
mode |= 1 << i;
level |= 1 << i;
} else {
irq_set_handler(i, handle_level_irq);
}
irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
}
/* Disable all interrupts */
__raw_writel(0, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
__raw_writel(0, FIQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
/* Set interrupt mode */
__raw_writel(mode, IRQ_TMODE(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
__raw_writel(level, IRQ_TLEVEL(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
}
arch/arm/mach-gemini/mm.c deleted 100644 → 0
View file @ e07e368b
/*
* Static mappings for Gemini
*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
/* Page table mapping for I/O region */
static struct map_desc gemini_io_desc[] __initdata = {
{
.virtual = (unsigned long)IO_ADDRESS(GEMINI_GLOBAL_BASE),
.pfn =__phys_to_pfn(GEMINI_GLOBAL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_UART_BASE),
.pfn = __phys_to_pfn(GEMINI_UART_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_TIMER_BASE),
.pfn = __phys_to_pfn(GEMINI_TIMER_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_INTERRUPT_BASE),
.pfn = __phys_to_pfn(GEMINI_INTERRUPT_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
.pfn = __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(0)),
.pfn = __phys_to_pfn(GEMINI_GPIO_BASE(0)),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(1)),
.pfn = __phys_to_pfn(GEMINI_GPIO_BASE(1)),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(2)),
.pfn = __phys_to_pfn(GEMINI_GPIO_BASE(2)),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
.pfn = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
.pfn = __phys_to_pfn(GEMINI_DRAM_CTRL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
.pfn = __phys_to_pfn(GEMINI_GENERAL_DMA_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
},
};
void __init gemini_map_io(void)
{
iotable_init(gemini_io_desc, ARRAY_SIZE(gemini_io_desc));
}
arch/arm/mach-gemini/reset.c deleted 100644 → 0
View file @ e07e368b
/*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __MACH_SYSTEM_H
#define __MACH_SYSTEM_H
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/global_reg.h>
#include "common.h"
void gemini_restart(enum reboot_mode mode, const char *cmd)
{
__raw_writel(RESET_GLOBAL | RESET_CPU1,
IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
}
#endif /* __MACH_SYSTEM_H */
arch/arm/mach-gemini/time.c deleted 100644 → 0
View file @ e07e368b
/*
* Copyright (C) 2001-2006 Storlink, Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/global_reg.h>
#include <asm/mach/time.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/sched_clock.h>
/*
* Register definitions for the timers
*/
#define TIMER1_BASE GEMINI_TIMER_BASE
#define TIMER2_BASE (GEMINI_TIMER_BASE + 0x10)
#define TIMER3_BASE (GEMINI_TIMER_BASE + 0x20)
#define TIMER_COUNT(BASE) (IO_ADDRESS(BASE) + 0x00)
#define TIMER_LOAD(BASE) (IO_ADDRESS(BASE) + 0x04)
#define TIMER_MATCH1(BASE) (IO_ADDRESS(BASE) + 0x08)
#define TIMER_MATCH2(BASE) (IO_ADDRESS(BASE) + 0x0C)
#define TIMER_CR (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x30)
#define TIMER_INTR_STATE (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x34)
#define TIMER_INTR_MASK (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x38)
#define TIMER_1_CR_ENABLE (1 << 0)
#define TIMER_1_CR_CLOCK (1 << 1)
#define TIMER_1_CR_INT (1 << 2)
#define TIMER_2_CR_ENABLE (1 << 3)
#define TIMER_2_CR_CLOCK (1 << 4)
#define TIMER_2_CR_INT (1 << 5)
#define TIMER_3_CR_ENABLE (1 << 6)
#define TIMER_3_CR_CLOCK (1 << 7)
#define TIMER_3_CR_INT (1 << 8)
#define TIMER_1_CR_UPDOWN (1 << 9)
#define TIMER_2_CR_UPDOWN (1 << 10)
#define TIMER_3_CR_UPDOWN (1 << 11)
#define TIMER_DEFAULT_FLAGS (TIMER_1_CR_UPDOWN | \
TIMER_3_CR_ENABLE | \
TIMER_3_CR_UPDOWN)
#define TIMER_1_INT_MATCH1 (1 << 0)
#define TIMER_1_INT_MATCH2 (1 << 1)
#define TIMER_1_INT_OVERFLOW (1 << 2)
#define TIMER_2_INT_MATCH1 (1 << 3)
#define TIMER_2_INT_MATCH2 (1 << 4)
#define TIMER_2_INT_OVERFLOW (1 << 5)
#define TIMER_3_INT_MATCH1 (1 << 6)
#define TIMER_3_INT_MATCH2 (1 << 7)
#define TIMER_3_INT_OVERFLOW (1 << 8)
#define TIMER_INT_ALL_MASK 0x1ff
static unsigned int tick_rate;
static u64 notrace gemini_read_sched_clock(void)
{
return readl(TIMER_COUNT(TIMER3_BASE));
}
static int gemini_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
u32 cr;
/* Setup the match register */
cr = readl(TIMER_COUNT(TIMER1_BASE));
writel(cr + cycles, TIMER_MATCH1(TIMER1_BASE));
if (readl(TIMER_COUNT(TIMER1_BASE)) - cr > cycles)
return -ETIME;
return 0;
}
static int gemini_timer_shutdown(struct clock_event_device *evt)
{
u32 cr;
/*
* Disable also for oneshot: the set_next() call will arm the timer
* instead.
*/
/* Stop timer and interrupt. */
cr = readl(TIMER_CR);
cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
writel(cr, TIMER_CR);
/* Setup counter start from 0 */
writel(0, TIMER_COUNT(TIMER1_BASE));
writel(0, TIMER_LOAD(TIMER1_BASE));
/* enable interrupt */
cr = readl(TIMER_INTR_MASK);
cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
cr |= TIMER_1_INT_MATCH1;
writel(cr, TIMER_INTR_MASK);
/* start the timer */
cr = readl(TIMER_CR);
cr |= TIMER_1_CR_ENABLE;
writel(cr, TIMER_CR);
return 0;
}
static int gemini_timer_set_periodic(struct clock_event_device *evt)
{
u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
u32 cr;
/* Stop timer and interrupt */
cr = readl(TIMER_CR);
cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
writel(cr, TIMER_CR);
/* Setup timer to fire at 1/HT intervals. */
cr = 0xffffffff - (period - 1);
writel(cr, TIMER_COUNT(TIMER1_BASE));
writel(cr, TIMER_LOAD(TIMER1_BASE));
/* enable interrupt on overflow */
cr = readl(TIMER_INTR_MASK);
cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
cr |= TIMER_1_INT_OVERFLOW;
writel(cr, TIMER_INTR_MASK);
/* Start the timer */
cr = readl(TIMER_CR);
cr |= TIMER_1_CR_ENABLE;
cr |= TIMER_1_CR_INT;
writel(cr, TIMER_CR);
return 0;
}
/* Use TIMER1 as clock event */
static struct clock_event_device gemini_clockevent = {
.name = "TIMER1",
/* Reasonably fast and accurate clock event */
.rating = 300,
.shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = gemini_timer_set_next_event,
.set_state_shutdown = gemini_timer_shutdown,
.set_state_periodic = gemini_timer_set_periodic,
.set_state_oneshot = gemini_timer_shutdown,
.tick_resume = gemini_timer_shutdown,
};
/*
* IRQ handler for the timer
*/
static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &gemini_clockevent;
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction gemini_timer_irq = {
.name = "Gemini Timer Tick",
.flags = IRQF_TIMER,
.handler = gemini_timer_interrupt,
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
void __init gemini_timer_init(void)
{
u32 reg_v;
reg_v = readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000;
printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
tick_rate /= 6; /* APB bus run AHB*(1/6) */
switch(reg_v & CPU_AHB_RATIO_MASK) {
case CPU_AHB_1_1:
printk(KERN_CONT "(1/1)\n");
break;
case CPU_AHB_3_2:
printk(KERN_CONT "(3/2)\n");
break;
case CPU_AHB_24_13:
printk(KERN_CONT "(24/13)\n");
break;
case CPU_AHB_2_1:
printk(KERN_CONT "(2/1)\n");
break;
}
/*
* Reset the interrupt mask and status
*/
writel(TIMER_INT_ALL_MASK, TIMER_INTR_MASK);
writel(0, TIMER_INTR_STATE);
writel(TIMER_DEFAULT_FLAGS, TIMER_CR);
/*
* Setup free-running clocksource timer (interrupts
* disabled.)
*/
writel(0, TIMER_COUNT(TIMER3_BASE));
writel(0, TIMER_LOAD(TIMER3_BASE));
writel(0, TIMER_MATCH1(TIMER3_BASE));
writel(0, TIMER_MATCH2(TIMER3_BASE));
clocksource_mmio_init(TIMER_COUNT(TIMER3_BASE),
"gemini_clocksource", tick_rate,
300, 32, clocksource_mmio_readl_up);
sched_clock_register(gemini_read_sched_clock, 32, tick_rate);
/*
* Setup clockevent timer (interrupt-driven.)
*/
writel(0, TIMER_COUNT(TIMER1_BASE));
writel(0, TIMER_LOAD(TIMER1_BASE));
writel(0, TIMER_MATCH1(TIMER1_BASE));
writel(0, TIMER_MATCH2(TIMER1_BASE));
setup_irq(IRQ_TIMER1, &gemini_timer_irq);
gemini_clockevent.cpumask = cpumask_of(0);
clockevents_config_and_register(&gemini_clockevent, tick_rate,
1, 0xffffffff);
}
arch/arm/mach-hisi/platmcpm.c
View file @ 8d648aad
......@@ -279,6 +279,8 @@ static int __init hip04_smp_init(void)
&hip04_boot_method[0], 4);
if (ret)
goto err;
ret = -ENODEV;
np_sctl = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
if (!np_sctl)
goto err;
......
arch/arm/mach-imx/mach-imx25.c
View file @ 8d648aad
......@@ -23,6 +23,11 @@ static void __init imx25_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX25);
}
static void __init imx25_dt_init(void)
{
imx_aips_allow_unprivileged_access("fsl,imx25-aips");
}
static void __init mx25_init_irq(void)
{
struct device_node *np;
......@@ -41,6 +46,7 @@ static const char * const imx25_dt_board_compat[] __initconst = {
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.init_early = imx25_init_early,
.init_machine = imx25_dt_init,
.init_late = imx25_pm_init,
.init_irq = mx25_init_irq,
.dt_compat = imx25_dt_board_compat,
......
arch/arm/mach-imx/mach-mx31_3ds.c
View file @ 8d648aad
......@@ -375,6 +375,8 @@ static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
/* SPI */
static int spi0_internal_chipselect[] = {
MXC_SPI_CS(0),
MXC_SPI_CS(1),
MXC_SPI_CS(2),
};
......@@ -385,6 +387,7 @@ static const struct spi_imx_master spi0_pdata __initconst = {
static int spi1_internal_chipselect[] = {
MXC_SPI_CS(0),
MXC_SPI_CS(1),
MXC_SPI_CS(2),
};
......@@ -398,7 +401,7 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
.chip_select = 1, /* SS2 */
.chip_select = 2, /* SS2 */
.platform_data = &mc13783_pdata,
/* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
......@@ -406,7 +409,7 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
.modalias = "l4f00242t03",
.max_speed_hz = 5000000,
.bus_num = 0,
.chip_select = 0, /* SS2 */
.chip_select = 2, /* SS2 */
.platform_data = &mx31_3ds_l4f00242t03_pdata,
},
};
......
arch/arm/mach-imx/mach-mx31moboard.c
View file @ 8d648aad
......@@ -296,14 +296,14 @@ static struct spi_board_info moboard_spi_board_info[] __initdata = {
/* irq number is run-time assigned */
.max_speed_hz = 300000,
.bus_num = 1,
.chip_select = 0,
.chip_select = 1,
.platform_data = &moboard_pmic,
.mode = SPI_CS_HIGH,
},
};
static int moboard_spi2_cs[] = {
MXC_SPI_CS(1),
MXC_SPI_CS(0), MXC_SPI_CS(1),
};
static const struct spi_imx_master moboard_spi2_pdata __initconst = {
......
arch/arm/mach-imx/mach-pcm037_eet.c
View file @ 8d648aad
......@@ -50,13 +50,13 @@ static struct spi_board_info pcm037_spi_dev[] = {
.modalias = "dac124s085",
.max_speed_hz = 400000,
.bus_num = 0,
.chip_select = 0, /* Index in pcm037_spi1_cs[] */
.chip_select = 1, /* Index in pcm037_spi1_cs[] */
.mode = SPI_CPHA,
},
};
/* Platform Data for MXC CSPI */
static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
static int pcm037_spi1_cs[] = { MXC_SPI_CS(0), MXC_SPI_CS(1), };
static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
.chipselect = pcm037_spi1_cs,
......
arch/arm/mach-imx/mmdc.c
View file @ 8d648aad
/*
* Copyright 2017 NXP
* Copyright 2011,2016 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
......@@ -47,6 +48,7 @@
#define PROFILE_SEL 0x10
#define MMDC_MADPCR0 0x410
#define MMDC_MADPCR1 0x414
#define MMDC_MADPSR0 0x418
#define MMDC_MADPSR1 0x41C
#define MMDC_MADPSR2 0x420
......@@ -57,6 +59,7 @@
#define MMDC_NUM_COUNTERS 6
#define MMDC_FLAG_PROFILE_SEL 0x1
#define MMDC_PRF_AXI_ID_CLEAR 0x0
#define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu)
......@@ -87,7 +90,7 @@ static DEFINE_IDA(mmdc_ida);
PMU_EVENT_ATTR_STRING(total-cycles, mmdc_pmu_total_cycles, "event=0x00")
PMU_EVENT_ATTR_STRING(busy-cycles, mmdc_pmu_busy_cycles, "event=0x01")
PMU_EVENT_ATTR_STRING(read-accesses, mmdc_pmu_read_accesses, "event=0x02")
PMU_EVENT_ATTR_STRING(write-accesses, mmdc_pmu_write_accesses, "config=0x03")
PMU_EVENT_ATTR_STRING(write-accesses, mmdc_pmu_write_accesses, "event=0x03")
PMU_EVENT_ATTR_STRING(read-bytes, mmdc_pmu_read_bytes, "event=0x04")
PMU_EVENT_ATTR_STRING(read-bytes.unit, mmdc_pmu_read_bytes_unit, "MB");
PMU_EVENT_ATTR_STRING(read-bytes.scale, mmdc_pmu_read_bytes_scale, "0.000001");
......@@ -161,8 +164,11 @@ static struct attribute_group mmdc_pmu_events_attr_group = {
};
PMU_FORMAT_ATTR(event, "config:0-63");
PMU_FORMAT_ATTR(axi_id, "config1:0-63");
static struct attribute *mmdc_pmu_format_attrs[] = {
&format_attr_event.attr,
&format_attr_axi_id.attr,
NULL,
};
......@@ -345,6 +351,14 @@ static void mmdc_pmu_event_start(struct perf_event *event, int flags)
writel(DBG_RST, reg);
/*
* Write the AXI id parameter to MADPCR1.
*/
val = event->attr.config1;
reg = mmdc_base + MMDC_MADPCR1;
writel(val, reg);
reg = mmdc_base + MMDC_MADPCR0;
val = DBG_EN;
if (pmu_mmdc->devtype_data->flags & MMDC_FLAG_PROFILE_SEL)
val |= PROFILE_SEL;
......@@ -382,6 +396,10 @@ static void mmdc_pmu_event_stop(struct perf_event *event, int flags)
reg = mmdc_base + MMDC_MADPCR0;
writel(PRF_FRZ, reg);
reg = mmdc_base + MMDC_MADPCR1;
writel(MMDC_PRF_AXI_ID_CLEAR, reg);
mmdc_pmu_event_update(event);
}
......
arch/arm/mach-mxs/mach-mxs.c
View file @ 8d648aad
......@@ -419,7 +419,8 @@ static void __init mxs_machine_init(void)
crystalfontz_init();
else if (of_machine_is_compatible("eukrea,mbmx283lc"))
eukrea_mbmx283lc_init();
else if (of_machine_is_compatible("i2se,duckbill"))
else if (of_machine_is_compatible("i2se,duckbill") ||
of_machine_is_compatible("i2se,duckbill-2"))
duckbill_init();
else if (of_machine_is_compatible("msr,m28cu3"))
m28cu3_init();
......
arch/arm/mach-omap1/pm.c
View file @ 8d648aad
......@@ -581,7 +581,6 @@ static int omap_pm_enter(suspend_state_t state)
{
switch (state)
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
omap1_pm_suspend();
break;
......
arch/arm/mach-omap2/clockdomains81xx_data.c
View file @ 8d648aad
......@@ -91,6 +91,14 @@ static struct clockdomain default_l3_slow_81xx_clkdm = {
.flags = CLKDM_CAN_SWSUP,
};
static struct clockdomain default_sata_81xx_clkdm = {
.name = "default_clkdm",
.pwrdm = { .name = "default_pwrdm" },
.cm_inst = TI81XX_CM_DEFAULT_MOD,
.clkdm_offs = TI816X_CM_DEFAULT_SATA_CLKDM,
.flags = CLKDM_CAN_SWSUP,
};
/* 816x only */
static struct clockdomain alwon_mpu_816x_clkdm = {
......@@ -173,6 +181,7 @@ static struct clockdomain *clockdomains_ti814x[] __initdata = {
&mmu_81xx_clkdm,
&mmu_cfg_81xx_clkdm,
&default_l3_slow_81xx_clkdm,
&default_sata_81xx_clkdm,
NULL,
};
......@@ -200,6 +209,7 @@ static struct clockdomain *clockdomains_ti816x[] __initdata = {
&default_ducati_816x_clkdm,
&default_pci_816x_clkdm,
&default_l3_slow_81xx_clkdm,
&default_sata_81xx_clkdm,
NULL,
};
......
arch/arm/mach-omap2/cm81xx.h
View file @ 8d648aad
......@@ -57,5 +57,6 @@
#define TI816X_CM_DEFAULT_PCI_CLKDM 0x0010
#define TI816X_CM_DEFAULT_L3_SLOW_CLKDM 0x0014
#define TI816X_CM_DEFAULT_DUCATI_CLKDM 0x0018
#define TI816X_CM_DEFAULT_SATA_CLKDM 0x0060
#endif
arch/arm/mach-omap2/devices.c
View file @ 8d648aad
......@@ -121,7 +121,7 @@ static inline void omap_init_mcspi(void) {}
*
* Bind the RNG hwmod to the RNG omap_device. No return value.
*/
static void omap_init_rng(void)
static void __init omap_init_rng(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
......
arch/arm/mach-omap2/omap_hwmod.c
View file @ 8d648aad
......@@ -138,7 +138,6 @@
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/bootmem.h>
#include <linux/cpu.h>
#include <linux/of.h>
#include <linux/of_address.h>
......@@ -216,48 +215,11 @@ static LIST_HEAD(omap_hwmod_list);
/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
static struct omap_hwmod *mpu_oh;
/*
* linkspace: ptr to a buffer that struct omap_hwmod_link records are
* allocated from - used to reduce the number of small memory
* allocations, which has a significant impact on performance
*/
static struct omap_hwmod_link *linkspace;
/*
* free_ls, max_ls: array indexes into linkspace; representing the
* next free struct omap_hwmod_link index, and the maximum number of
* struct omap_hwmod_link records allocated (respectively)
*/
static unsigned short free_ls, max_ls, ls_supp;
/* inited: set to true once the hwmod code is initialized */
static bool inited;
/* Private functions */
/**
* _fetch_next_ocp_if - return the next OCP interface in a list
* @p: ptr to a ptr to the list_head inside the ocp_if to return
* @i: pointer to the index of the element pointed to by @p in the list
*
* Return a pointer to the struct omap_hwmod_ocp_if record
* containing the struct list_head pointed to by @p, and increment
* @p such that a future call to this routine will return the next
* record.
*/
static struct omap_hwmod_ocp_if *_fetch_next_ocp_if(struct list_head **p,
int *i)
{
struct omap_hwmod_ocp_if *oi;
oi = list_entry(*p, struct omap_hwmod_link, node)->ocp_if;
*p = (*p)->next;
*i = *i + 1;
return oi;
}
/**
* _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
* @oh: struct omap_hwmod *
......@@ -794,15 +756,10 @@ static int _init_main_clk(struct omap_hwmod *oh)
static int _init_interface_clks(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
struct list_head *p;
struct clk *c;
int i = 0;
int ret = 0;
p = oh->slave_ports.next;
while (i < oh->slaves_cnt) {
os = _fetch_next_ocp_if(&p, &i);
list_for_each_entry(os, &oh->slave_ports, node) {
if (!os->clk)
continue;
......@@ -905,19 +862,13 @@ static void _disable_optional_clocks(struct omap_hwmod *oh)
static int _enable_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
struct list_head *p;
int i = 0;
pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
if (oh->_clk)
clk_enable(oh->_clk);
p = oh->slave_ports.next;
while (i < oh->slaves_cnt) {
os = _fetch_next_ocp_if(&p, &i);
list_for_each_entry(os, &oh->slave_ports, node) {
if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
clk_enable(os->_clk);
}
......@@ -939,19 +890,13 @@ static int _enable_clocks(struct omap_hwmod *oh)
static int _disable_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
struct list_head *p;
int i = 0;
pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
if (oh->_clk)
clk_disable(oh->_clk);
p = oh->slave_ports.next;
while (i < oh->slaves_cnt) {
os = _fetch_next_ocp_if(&p, &i);
list_for_each_entry(os, &oh->slave_ports, node) {
if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
clk_disable(os->_clk);
}
......@@ -1190,16 +1135,11 @@ static int _get_sdma_req_by_name(struct omap_hwmod *oh, const char *name,
static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name,
u32 *pa_start, u32 *pa_end)
{
int i, j;
int j;
struct omap_hwmod_ocp_if *os;
struct list_head *p = NULL;
bool found = false;
p = oh->slave_ports.next;
i = 0;
while (i < oh->slaves_cnt) {
os = _fetch_next_ocp_if(&p, &i);
list_for_each_entry(os, &oh->slave_ports, node) {
if (!os->addr)
return -ENOENT;
......@@ -1239,18 +1179,13 @@ static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name,
static void __init _save_mpu_port_index(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os = NULL;
struct list_head *p;
int i = 0;
if (!oh)
return;
oh->_int_flags |= _HWMOD_NO_MPU_PORT;
p = oh->slave_ports.next;
while (i < oh->slaves_cnt) {
os = _fetch_next_ocp_if(&p, &i);
list_for_each_entry(os, &oh->slave_ports, node) {
if (os->user & OCP_USER_MPU) {
oh->_mpu_port = os;
oh->_int_flags &= ~_HWMOD_NO_MPU_PORT;
......@@ -1393,7 +1328,7 @@ static void _enable_sysc(struct omap_hwmod *oh)
*/
if ((oh->flags & HWMOD_SET_DEFAULT_CLOCKACT) &&
(sf & SYSC_HAS_CLOCKACTIVITY))
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
_set_clockactivity(oh, CLOCKACT_TEST_ICLK, &v);
_write_sysconfig(v, oh);
......@@ -2092,7 +2027,7 @@ static int _enable(struct omap_hwmod *oh)
r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
-EINVAL;
if (oh->clkdm)
if (oh->clkdm && !(oh->flags & HWMOD_CLKDM_NOAUTO))
clkdm_allow_idle(oh->clkdm);
if (!r) {
......@@ -2149,7 +2084,12 @@ static int _idle(struct omap_hwmod *oh)
_idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh);
if (oh->clkdm)
/*
* If HWMOD_CLKDM_NOAUTO is set then we don't
* deny idle the clkdm again since idle was already denied
* in _enable()
*/
if (oh->clkdm && !(oh->flags & HWMOD_CLKDM_NOAUTO))
clkdm_deny_idle(oh->clkdm);
if (oh->flags & HWMOD_BLOCK_WFI)
......@@ -2451,15 +2391,11 @@ static int __init _init(struct omap_hwmod *oh, void *data)
static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
struct list_head *p;
int i = 0;
if (oh->_state != _HWMOD_STATE_INITIALIZED)
return;
p = oh->slave_ports.next;
while (i < oh->slaves_cnt) {
os = _fetch_next_ocp_if(&p, &i);
list_for_each_entry(os, &oh->slave_ports, node) {
if (!os->_clk)
continue;
......@@ -2657,7 +2593,6 @@ static int __init _register(struct omap_hwmod *oh)
list_add_tail(&oh->node, &omap_hwmod_list);
INIT_LIST_HEAD(&oh->master_ports);
INIT_LIST_HEAD(&oh->slave_ports);
spin_lock_init(&oh->_lock);
lockdep_set_class(&oh->_lock, &oh->hwmod_key);
......@@ -2674,50 +2609,11 @@ static int __init _register(struct omap_hwmod *oh)
return 0;
}
/**
* _alloc_links - return allocated memory for hwmod links
* @ml: pointer to a struct omap_hwmod_link * for the master link
* @sl: pointer to a struct omap_hwmod_link * for the slave link
*
* Return pointers to two struct omap_hwmod_link records, via the
* addresses pointed to by @ml and @sl. Will first attempt to return
* memory allocated as part of a large initial block, but if that has
* been exhausted, will allocate memory itself. Since ideally this
* second allocation path will never occur, the number of these
* 'supplemental' allocations will be logged when debugging is
* enabled. Returns 0.
*/
static int __init _alloc_links(struct omap_hwmod_link **ml,
struct omap_hwmod_link **sl)
{
unsigned int sz;
if ((free_ls + LINKS_PER_OCP_IF) <= max_ls) {
*ml = &linkspace[free_ls++];
*sl = &linkspace[free_ls++];
return 0;
}
sz = sizeof(struct omap_hwmod_link) * LINKS_PER_OCP_IF;
*sl = NULL;
*ml = memblock_virt_alloc(sz, 0);
*sl = (void *)(*ml) + sizeof(struct omap_hwmod_link);
ls_supp++;
pr_debug("omap_hwmod: supplemental link allocations needed: %d\n",
ls_supp * LINKS_PER_OCP_IF);
return 0;
};
/**
* _add_link - add an interconnect between two IP blocks
* @oi: pointer to a struct omap_hwmod_ocp_if record
*
* Add struct omap_hwmod_link records connecting the master IP block
* specified in @oi->master to @oi, and connecting the slave IP block
* Add struct omap_hwmod_link records connecting the slave IP block
* specified in @oi->slave to @oi. This code is assumed to run before
* preemption or SMP has been enabled, thus avoiding the need for
* locking in this code. Changes to this assumption will require
......@@ -2725,19 +2621,10 @@ static int __init _alloc_links(struct omap_hwmod_link **ml,
*/
static int __init _add_link(struct omap_hwmod_ocp_if *oi)
{
struct omap_hwmod_link *ml, *sl;
pr_debug("omap_hwmod: %s -> %s: adding link\n", oi->master->name,
oi->slave->name);
_alloc_links(&ml, &sl);
ml->ocp_if = oi;
list_add(&ml->node, &oi->master->master_ports);
oi->master->masters_cnt++;
sl->ocp_if = oi;
list_add(&sl->node, &oi->slave->slave_ports);
list_add(&oi->node, &oi->slave->slave_ports);
oi->slave->slaves_cnt++;
return 0;
......@@ -2784,45 +2671,6 @@ static int __init _register_link(struct omap_hwmod_ocp_if *oi)
return 0;
}
/**
* _alloc_linkspace - allocate large block of hwmod links
* @ois: pointer to an array of struct omap_hwmod_ocp_if records to count
*
* Allocate a large block of struct omap_hwmod_link records. This
* improves boot time significantly by avoiding the need to allocate
* individual records one by one. If the number of records to
* allocate in the block hasn't been manually specified, this function
* will count the number of struct omap_hwmod_ocp_if records in @ois
* and use that to determine the allocation size. For SoC families
* that require multiple list registrations, such as OMAP3xxx, this
* estimation process isn't optimal, so manual estimation is advised
* in those cases. Returns -EEXIST if the allocation has already occurred
* or 0 upon success.
*/
static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
{
unsigned int i = 0;
unsigned int sz;
if (linkspace) {
WARN(1, "linkspace already allocated\n");
return -EEXIST;
}
if (max_ls == 0)
while (ois[i++])
max_ls += LINKS_PER_OCP_IF;
sz = sizeof(struct omap_hwmod_link) * max_ls;
pr_debug("omap_hwmod: %s: allocating %d byte linkspace (%d links)\n",
__func__, sz, max_ls);
linkspace = memblock_virt_alloc(sz, 0);
return 0;
}
/* Static functions intended only for use in soc_ops field function pointers */
/**
......@@ -3180,13 +3028,6 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
if (ois[0] == NULL) /* Empty list */
return 0;
if (!linkspace) {
if (_alloc_linkspace(ois)) {
pr_err("omap_hwmod: could not allocate link space\n");
return -ENOMEM;
}
}
i = 0;
do {
r = _register_link(ois[i]);
......@@ -3398,14 +3239,10 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags)
ret += _count_sdma_reqs(oh);
if (flags & IORESOURCE_MEM) {
int i = 0;
struct omap_hwmod_ocp_if *os;
struct list_head *p = oh->slave_ports.next;
while (i < oh->slaves_cnt) {
os = _fetch_next_ocp_if(&p, &i);
list_for_each_entry(os, &oh->slave_ports, node)
ret += _count_ocp_if_addr_spaces(os);
}
}
return ret;
......@@ -3424,7 +3261,6 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags)
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
{
struct omap_hwmod_ocp_if *os;
struct list_head *p;
int i, j, mpu_irqs_cnt, sdma_reqs_cnt, addr_cnt;
int r = 0;
......@@ -3454,11 +3290,7 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
r++;
}
p = oh->slave_ports.next;
i = 0;
while (i < oh->slaves_cnt) {
os = _fetch_next_ocp_if(&p, &i);
list_for_each_entry(os, &oh->slave_ports, node) {
addr_cnt = _count_ocp_if_addr_spaces(os);
for (j = 0; j < addr_cnt; j++) {
......
arch/arm/mach-omap2/omap_hwmod.h
View file @ 8d648aad
......@@ -313,6 +313,7 @@ struct omap_hwmod_ocp_if {
struct omap_hwmod_addr_space *addr;
const char *clk;
struct clk *_clk;
struct list_head node;
union {
struct omap_hwmod_omap2_firewall omap2;
} fw;
......@@ -410,7 +411,6 @@ struct omap_hwmod_class_sysconfig {
struct omap_hwmod_sysc_fields *sysc_fields;
u8 srst_udelay;
u8 idlemodes;
u8 clockact;
};
/**
......@@ -531,6 +531,10 @@ struct omap_hwmod_omap4_prcm {
* operate and they need to be handled at the same time as the main_clk.
* HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain
* IPs like CPSW on DRA7, where clocks to this module cannot be disabled.
* HWMOD_CLKDM_NOAUTO: Allows the hwmod's clockdomain to be prevented from
* entering HW_AUTO while hwmod is active. This is needed to workaround
* some modules which don't function correctly with HW_AUTO. For example,
* DCAN on DRA7x SoC needs this to workaround errata i893.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
......@@ -548,6 +552,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_RECONFIG_IO_CHAIN (1 << 13)
#define HWMOD_OPT_CLKS_NEEDED (1 << 14)
#define HWMOD_NO_IDLE (1 << 15)
#define HWMOD_CLKDM_NOAUTO (1 << 16)
/*
* omap_hwmod._int_flags definitions
......@@ -616,16 +621,6 @@ struct omap_hwmod_class {
void (*unlock)(struct omap_hwmod *oh);
};
/**
* struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs
* @ocp_if: OCP interface structure record pointer
* @node: list_head pointing to next struct omap_hwmod_link in a list
*/
struct omap_hwmod_link {
struct omap_hwmod_ocp_if *ocp_if;
struct list_head node;
};
/**
* struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
* @name: name of the hwmod
......@@ -686,9 +681,8 @@ struct omap_hwmod {
const char *main_clk;
struct clk *_clk;
struct omap_hwmod_opt_clk *opt_clks;
char *clkdm_name;
const char *clkdm_name;
struct clockdomain *clkdm;
struct list_head master_ports; /* connect to *_IA */
struct list_head slave_ports; /* connect to *_TA */
void *dev_attr;
u32 _sysc_cache;
......@@ -698,12 +692,11 @@ struct omap_hwmod {
struct list_head node;
struct omap_hwmod_ocp_if *_mpu_port;
unsigned int (*xlate_irq)(unsigned int);
u16 flags;
u32 flags;
u8 mpu_rt_idx;
u8 response_lat;
u8 rst_lines_cnt;
u8 opt_clks_cnt;
u8 masters_cnt;
u8 slaves_cnt;
u8 hwmods_cnt;
u8 _int_flags;
......
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
View file @ 8d648aad
......@@ -55,7 +55,6 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
......
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View file @ 8d648aad
......@@ -149,7 +149,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = {
SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
......@@ -424,7 +423,6 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
......@@ -1045,7 +1043,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = {
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
.clockact = 0x2,
};
static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
......@@ -1210,7 +1207,6 @@ static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = {
static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = {
.sysc_offs = 0x24,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE),
.clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap34xx_sr_sysc_fields,
};
......
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View file @ 8d648aad
......@@ -1320,7 +1320,6 @@ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = {
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
......@@ -2548,7 +2547,6 @@ static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = {
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
......
arch/arm/mach-omap2/omap_hwmod_54xx_data.c
View file @ 8d648aad
......@@ -839,7 +839,6 @@ static struct omap_hwmod_class_sysconfig omap54xx_i2c_sysc = {
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
......@@ -1530,7 +1529,6 @@ static struct omap_hwmod_class_sysconfig omap54xx_timer_1ms_sysc = {
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type2,
.clockact = CLOCKACT_TEST_ICLK,
};
static struct omap_hwmod_class omap54xx_timer_1ms_hwmod_class = {
......
arch/arm/mach-omap2/omap_hwmod_7xx_data.c
View file @ 8d648aad
......@@ -359,6 +359,7 @@ static struct omap_hwmod dra7xx_dcan1_hwmod = {
.class = &dra7xx_dcan_hwmod_class,
.clkdm_name = "wkupaon_clkdm",
.main_clk = "dcan1_sys_clk_mux",
.flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL_OFFSET,
......@@ -374,6 +375,7 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
.class = &dra7xx_dcan_hwmod_class,
.clkdm_name = "l4per2_clkdm",
.main_clk = "sys_clkin1",
.flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER2_DCAN2_CLKCTRL_OFFSET,
......@@ -1098,7 +1100,6 @@ static struct omap_hwmod_class_sysconfig dra7xx_i2c_sysc = {
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
......@@ -2700,6 +2701,7 @@ static struct omap_hwmod dra7xx_usb_otg_ss1_hwmod = {
.class = &dra7xx_usb_otg_ss_hwmod_class,
.clkdm_name = "l3init_clkdm",
.main_clk = "dpll_core_h13x2_ck",
.flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET,
......@@ -2721,6 +2723,7 @@ static struct omap_hwmod dra7xx_usb_otg_ss2_hwmod = {
.class = &dra7xx_usb_otg_ss_hwmod_class,
.clkdm_name = "l3init_clkdm",
.main_clk = "dpll_core_h13x2_ck",
.flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET,
......
arch/arm/mach-omap2/omap_hwmod_81xx_data.c
View file @ 8d648aad
......@@ -106,6 +106,7 @@
*/
#define DM81XX_CM_DEFAULT_OFFSET 0x500
#define DM81XX_CM_DEFAULT_USB_CLKCTRL (0x558 - DM81XX_CM_DEFAULT_OFFSET)
#define DM81XX_CM_DEFAULT_SATA_CLKCTRL (0x560 - DM81XX_CM_DEFAULT_OFFSET)
/* L3 Interconnect entries clocked at 125, 250 and 500MHz */
static struct omap_hwmod dm81xx_alwon_l3_slow_hwmod = {
......@@ -973,6 +974,38 @@ static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = {
.user = OCP_USER_MPU,
};
static struct omap_hwmod_class_sysconfig dm81xx_sata_sysc = {
.sysc_offs = 0x1100,
.sysc_flags = SYSC_HAS_SIDLEMODE,
.idlemodes = SIDLE_FORCE,
.sysc_fields = &omap_hwmod_sysc_type3,
};
static struct omap_hwmod_class dm81xx_sata_hwmod_class = {
.name = "sata",
.sysc = &dm81xx_sata_sysc,
};
static struct omap_hwmod dm81xx_sata_hwmod = {
.name = "sata",
.clkdm_name = "default_sata_clkdm",
.flags = HWMOD_NO_IDLEST,
.prcm = {
.omap4 = {
.clkctrl_offs = DM81XX_CM_DEFAULT_SATA_CLKCTRL,
.modulemode = MODULEMODE_SWCTRL,
},
},
.class = &dm81xx_sata_hwmod_class,
};
static struct omap_hwmod_ocp_if dm81xx_l4_hs__sata = {
.master = &dm81xx_l4_hs_hwmod,
.slave = &dm81xx_sata_hwmod,
.clk = "sysclk5_ck",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_class_sysconfig dm81xx_mmc_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x110,
......@@ -1474,6 +1507,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
&dm81xx_l4_hs__emac0,
&dm81xx_emac0__mdio,
&dm816x_l4_hs__emac1,
&dm81xx_l4_hs__sata,
&dm81xx_alwon_l3_fast__tpcc,
&dm81xx_alwon_l3_fast__tptc0,
&dm81xx_alwon_l3_fast__tptc1,
......
arch/arm/mach-omap2/pm.c
View file @ 8d648aad
......@@ -163,7 +163,6 @@ static int omap_pm_enter(suspend_state_t suspend_state)
return -ENOENT; /* XXX doublecheck */
switch (suspend_state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap_pm_suspend();
break;
......
arch/arm/mach-stm32/Kconfig 0 → 100644
View file @ 8d648aad
config ARCH_STM32
bool "STMicrolectronics STM32"
depends on ARM_SINGLE_ARMV7M
select ARCH_HAS_RESET_CONTROLLER
select ARMV7M_SYSTICK
select CLKSRC_STM32
select PINCTRL
select RESET_CONTROLLER
select STM32_EXTI
help
Support for STMicroelectronics STM32 processors.
config MACH_STM32F429
bool "STMicrolectronics STM32F429"
depends on ARCH_STM32
default y
config MACH_STM32F746
bool "STMicrolectronics STM32F746"
depends on ARCH_STM32
default y
config MACH_STM32H743
bool "STMicrolectronics STM32H743"
depends on ARCH_STM32
default y
arch/arm/mach-stm32/board-dt.c
View file @ 8d648aad
......@@ -12,6 +12,7 @@ static const char *const stm32_compat[] __initconst = {
"st,stm32f429",
"st,stm32f469",
"st,stm32f746",
"st,stm32h743",
NULL
};
......
arch/arm/mach-sunxi/Kconfig
View file @ 8d648aad
......@@ -6,6 +6,7 @@ menuconfig ARCH_SUNXI
select GENERIC_IRQ_CHIP
select GPIOLIB
select PINCTRL
select PM_OPP
select SUN4I_TIMER
select RESET_CONTROLLER
......
drivers/soc/Kconfig
View file @ 8d648aad
menu "SOC (System On Chip) specific Drivers"
source "drivers/soc/atmel/Kconfig"
source "drivers/soc/bcm/Kconfig"
source "drivers/soc/fsl/Kconfig"
source "drivers/soc/mediatek/Kconfig"
......
drivers/soc/Makefile
View file @ 8d648aad
......@@ -2,6 +2,7 @@
# Makefile for the Linux Kernel SOC specific device drivers.
#
obj-$(CONFIG_ARCH_AT91) += atmel/
obj-y += bcm/
obj-$(CONFIG_ARCH_DOVE) += dove/
obj-$(CONFIG_MACH_DOVE) += dove/
......
drivers/soc/atmel/Kconfig 0 → 100644
View file @ 8d648aad
config AT91_SOC_ID
bool "SoC bus for Atmel ARM SoCs"
depends on ARCH_AT91 || COMPILE_TEST
default ARCH_AT91
help
Include support for the SoC bus on the Atmel ARM SoCs.
drivers/soc/atmel/Makefile 0 → 100644
View file @ 8d648aad
obj-$(CONFIG_AT91_SOC_ID) += soc.o
arch/arm/mach-at91/soc.c → drivers/soc/atmel/soc.c
View file @ 8d648aad
......@@ -29,6 +29,87 @@
#define AT91_CIDR_EXT BIT(31)
#define AT91_CIDR_MATCH_MASK 0x7fffffe0
static const struct at91_soc __initconst socs[] = {
#ifdef CONFIG_SOC_AT91RM9200
AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
#endif
#ifdef CONFIG_SOC_AT91SAM9
AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
"at91sam9m11", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
"at91sam9m10", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
"at91sam9g46", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
"at91sam9g45", "at91sam9g45"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
"at91sam9g15", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
"at91sam9g35", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
"at91sam9x35", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
"at91sam9g25", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
"at91sam9x25", "at91sam9x5"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
"at91sam9cn12", "at91sam9n12"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
"at91sam9n12", "at91sam9n12"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
"at91sam9cn11", "at91sam9n12"),
AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
#endif
#ifdef CONFIG_SOC_SAMA5
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
"sama5d21", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH,
"sama5d22", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH,
"sama5d23", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH,
"sama5d24", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CU_EXID_MATCH,
"sama5d24", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D26CU_EXID_MATCH,
"sama5d26", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CU_EXID_MATCH,
"sama5d27", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH,
"sama5d27", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH,
"sama5d28", "sama5d2"),
AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH,
"sama5d28", "sama5d2"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
"sama5d31", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
"sama5d33", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
"sama5d34", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
"sama5d35", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
"sama5d36", "sama5d3"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
"sama5d41", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
"sama5d42", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
"sama5d43", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
"sama5d44", "sama5d4"),
#endif
{ /* sentinel */ },
};
static int __init at91_get_cidr_exid_from_dbgu(u32 *cidr, u32 *exid)
{
struct device_node *np;
......@@ -140,3 +221,11 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
return soc_dev;
}
static int __init atmel_soc_device_init(void)
{
at91_soc_init(socs);
return 0;
}
subsys_initcall(atmel_soc_device_init);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7