Merge master.kernel.org:/home/rmk/linux-2.6-mmc

drivers/mmc/mmc.c

@@ -495,6 +495,7 @@ static void mmc_decode_cid(struct mmc_card *card)
 
 		case 2: /* MMC v2.0 - v2.2 */
 		case 3: /* MMC v3.1 - v3.3 */
+		case 4: /* MMC v4 */
 			card->cid.manfid	= UNSTUFF_BITS(resp, 120, 8);
 			card->cid.oemid		= UNSTUFF_BITS(resp, 104, 16);
 			card->cid.prod_name[0]	= UNSTUFF_BITS(resp, 96, 8);

drivers/mmc/mmc_block.c

@@ -187,7 +187,13 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 			brq.data.flags |= MMC_DATA_WRITE;
 			brq.data.blocks = 1;
 		}
-		brq.mrq.stop = brq.data.blocks > 1 ? &brq.stop : NULL;
+
+		if (brq.data.blocks > 1) {
+			brq.data.flags |= MMC_DATA_MULTI;
+			brq.mrq.stop = &brq.stop;
+		} else {
+			brq.mrq.stop = NULL;
+		}
 
 		brq.data.sg = mq->sg;
 		brq.data.sg_len = blk_rq_map_sg(req->q, req, brq.data.sg);

include/linux/mmc/mmc.h

@@ -27,14 +27,15 @@ struct mmc_command {
 #define MMC_RSP_MASK	(3 << 0)
 #define MMC_RSP_CRC	(1 << 3)		/* expect valid crc */
 #define MMC_RSP_BUSY	(1 << 4)		/* card may send busy */
+#define MMC_RSP_OPCODE	(1 << 5)		/* response contains opcode */
 
 /*
  * These are the response types, and correspond to valid bit
  * patterns of the above flags.  One additional valid pattern
  * is all zeros, which means we don't expect a response.
  */
-#define MMC_RSP_R1	(MMC_RSP_SHORT|MMC_RSP_CRC)
-#define MMC_RSP_R1B	(MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_BUSY)
+#define MMC_RSP_R1	(MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R1B	(MMC_RSP_SHORT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
 #define MMC_RSP_R2	(MMC_RSP_LONG|MMC_RSP_CRC)
 #define MMC_RSP_R3	(MMC_RSP_SHORT)
 #define MMC_RSP_R6	(MMC_RSP_SHORT|MMC_RSP_CRC)
@@ -64,6 +65,7 @@ struct mmc_data {
 #define MMC_DATA_WRITE	(1 << 8)
 #define MMC_DATA_READ	(1 << 9)
 #define MMC_DATA_STREAM	(1 << 10)
+#define MMC_DATA_MULTI	(1 << 11)
 
 	unsigned int		bytes_xfered;