Commit 8ecc5413 authored by Vincent ABRIOU's avatar Vincent ABRIOU Committed by Mauro Carvalho Chehab

[media] vivid: support for contiguous DMA buffers

It allows to simulate the behavior of hardware with such limitations or
to connect vivid to real hardware with such limitations.

Add the "allocators" module parameter option to let vivid use the
dma-contig instead of vmalloc.
Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarVincent Abriou <vincent.abriou@st.com>
Reviewed-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Tested-by: default avatarJavier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 93d4a26c
......@@ -263,6 +263,14 @@ all configurable using the following module options:
removed. Unless overridden by ccs_cap_mode and/or ccs_out_mode the
will default to enabling crop, compose and scaling.
- allocators:
memory allocator selection, default is 0. It specifies the way buffers
will be allocated.
- 0: vmalloc
- 1: dma-contig
Taken together, all these module options allow you to precisely customize
the driver behavior and test your application with all sorts of permutations.
It is also very suitable to emulate hardware that is not yet available, e.g.
......
config VIDEO_VIVID
tristate "Virtual Video Test Driver"
depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FB
depends on HAS_DMA
select FONT_SUPPORT
select FONT_8x16
select FB_CFB_FILLRECT
......@@ -8,6 +9,7 @@ config VIDEO_VIVID
select FB_CFB_IMAGEBLIT
select MEDIA_CEC_EDID
select VIDEOBUF2_VMALLOC
select VIDEOBUF2_DMA_CONTIG
select VIDEO_V4L2_TPG
default n
---help---
......
......@@ -30,6 +30,7 @@
#include <linux/videodev2.h>
#include <linux/v4l2-dv-timings.h>
#include <media/videobuf2-vmalloc.h>
#include <media/videobuf2-dma-contig.h>
#include <media/v4l2-dv-timings.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-fh.h>
......@@ -151,6 +152,12 @@ static bool no_error_inj;
module_param(no_error_inj, bool, 0444);
MODULE_PARM_DESC(no_error_inj, " if set disable the error injecting controls");
static unsigned int allocators[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 0 };
module_param_array(allocators, uint, NULL, 0444);
MODULE_PARM_DESC(allocators, " memory allocator selection, default is 0.\n"
"\t\t 0 == vmalloc\n"
"\t\t 1 == dma-contig");
static struct vivid_dev *vivid_devs[VIVID_MAX_DEVS];
const struct v4l2_rect vivid_min_rect = {
......@@ -636,6 +643,10 @@ static int vivid_create_instance(struct platform_device *pdev, int inst)
{
static const struct v4l2_dv_timings def_dv_timings =
V4L2_DV_BT_CEA_1280X720P60;
static const struct vb2_mem_ops * const vivid_mem_ops[2] = {
&vb2_vmalloc_memops,
&vb2_dma_contig_memops,
};
unsigned in_type_counter[4] = { 0, 0, 0, 0 };
unsigned out_type_counter[4] = { 0, 0, 0, 0 };
int ccs_cap = ccs_cap_mode[inst];
......@@ -646,6 +657,7 @@ static int vivid_create_instance(struct platform_device *pdev, int inst)
struct video_device *vfd;
struct vb2_queue *q;
unsigned node_type = node_types[inst];
unsigned int allocator = allocators[inst];
v4l2_std_id tvnorms_cap = 0, tvnorms_out = 0;
int ret;
int i;
......@@ -1039,6 +1051,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst)
goto unreg_dev;
}
if (allocator == 1)
dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
else if (allocator >= ARRAY_SIZE(vivid_mem_ops))
allocator = 0;
/* start creating the vb2 queues */
if (dev->has_vid_cap) {
/* initialize vid_cap queue */
......@@ -1049,10 +1066,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst)
q->drv_priv = dev;
q->buf_struct_size = sizeof(struct vivid_buffer);
q->ops = &vivid_vid_cap_qops;
q->mem_ops = &vb2_vmalloc_memops;
q->mem_ops = vivid_mem_ops[allocator];
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
q->min_buffers_needed = 2;
q->lock = &dev->mutex;
q->dev = dev->v4l2_dev.dev;
ret = vb2_queue_init(q);
if (ret)
......@@ -1068,10 +1086,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst)
q->drv_priv = dev;
q->buf_struct_size = sizeof(struct vivid_buffer);
q->ops = &vivid_vid_out_qops;
q->mem_ops = &vb2_vmalloc_memops;
q->mem_ops = vivid_mem_ops[allocator];
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
q->min_buffers_needed = 2;
q->lock = &dev->mutex;
q->dev = dev->v4l2_dev.dev;
ret = vb2_queue_init(q);
if (ret)
......@@ -1087,10 +1106,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst)
q->drv_priv = dev;
q->buf_struct_size = sizeof(struct vivid_buffer);
q->ops = &vivid_vbi_cap_qops;
q->mem_ops = &vb2_vmalloc_memops;
q->mem_ops = vivid_mem_ops[allocator];
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
q->min_buffers_needed = 2;
q->lock = &dev->mutex;
q->dev = dev->v4l2_dev.dev;
ret = vb2_queue_init(q);
if (ret)
......@@ -1106,10 +1126,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst)
q->drv_priv = dev;
q->buf_struct_size = sizeof(struct vivid_buffer);
q->ops = &vivid_vbi_out_qops;
q->mem_ops = &vb2_vmalloc_memops;
q->mem_ops = vivid_mem_ops[allocator];
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
q->min_buffers_needed = 2;
q->lock = &dev->mutex;
q->dev = dev->v4l2_dev.dev;
ret = vb2_queue_init(q);
if (ret)
......@@ -1124,10 +1145,11 @@ static int vivid_create_instance(struct platform_device *pdev, int inst)
q->drv_priv = dev;
q->buf_struct_size = sizeof(struct vivid_buffer);
q->ops = &vivid_sdr_cap_qops;
q->mem_ops = &vb2_vmalloc_memops;
q->mem_ops = vivid_mem_ops[allocator];
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
q->min_buffers_needed = 8;
q->lock = &dev->mutex;
q->dev = dev->v4l2_dev.dev;
ret = vb2_queue_init(q);
if (ret)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment