Commit 8eefac2d authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Simon Horman

ARM: shmobile: r8a7791: Add DU node to device tree

Add the DU device with a disabled state. Boards that want to enable the
DU need to specify the output topology
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 3ac6a83c
...@@ -637,6 +637,75 @@ vin2: video@e6ef2000 { ...@@ -637,6 +637,75 @@ vin2: video@e6ef2000 {
status = "disabled"; status = "disabled";
}; };
vsp1@fe928000 {
compatible = "renesas,vsp1";
reg = <0 0xfe928000 0 0x8000>;
interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
renesas,has-lut;
renesas,has-sru;
renesas,#rpf = <5>;
renesas,#uds = <3>;
renesas,#wpf = <4>;
};
vsp1@fe930000 {
compatible = "renesas,vsp1";
reg = <0 0xfe930000 0 0x8000>;
interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
renesas,has-lif;
renesas,has-lut;
renesas,#rpf = <4>;
renesas,#uds = <1>;
renesas,#wpf = <4>;
};
vsp1@fe938000 {
compatible = "renesas,vsp1";
reg = <0 0xfe938000 0 0x8000>;
interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
renesas,has-lif;
renesas,has-lut;
renesas,#rpf = <4>;
renesas,#uds = <1>;
renesas,#wpf = <4>;
};
du: display@feb00000 {
compatible = "renesas,du-r8a7791";
reg = <0 0xfeb00000 0 0x40000>,
<0 0xfeb90000 0 0x1c>;
reg-names = "du", "lvds.0";
interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
<0 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_DU0>,
<&mstp7_clks R8A7791_CLK_DU1>,
<&mstp7_clks R8A7791_CLK_LVDS0>;
clock-names = "du.0", "du.1", "lvds.0";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
du_out_rgb: endpoint {
};
};
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
};
};
};
};
clocks { clocks {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <2>; #size-cells = <2>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment