Commit 91f15fb3 authored by Zhang Rui's avatar Zhang Rui Committed by Bjorn Helgaas

PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI

On multi-function JMicron SATA/PATA/AHCI devices, the PATA controller at
function 1 doesn't work if it is powered on before the SATA controller at
function 0.  The result is that PATA doesn't work after resume, and we
print messages like this:

  pata_jmicron 0000:02:00.1: Refused to change power state, currently in D3
  irq 17: nobody cared (try booting with the "irqpoll" option)

Async resume was introduced in v3.15 by 76569faa ("PM / sleep:
Asynchronous threads for resume_noirq").  Prior to that, we powered on
the functions in order, so this problem shouldn't happen.

e6b7e41c ("ata: Disabling the async PM for JMicron chip 363/361")
solved the problem for JMicron 361 and 363 devices.  With async suspend
disabled, we always power on function 0 before function 1.

Barto then reported the same problem with a JMicron 368 (see comment #57 in
the bugzilla).

Rather than extending the blacklist piecemeal, disable async suspend for
all JMicron multi-function SATA/PATA/AHCI devices.

This quirk could stay in the ahci and pata_jmicron drivers, but it's likely
the problem will occur even if pata_jmicron isn't loaded until after the
suspend/resume.  Making it a PCI quirk ensures that we'll preserve the
power-on order even if the drivers aren't loaded.

[bhelgaas: changelog, limit to multi-function, limit to IDE/ATA]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=81551Reported-and-tested-by: default avatarBarto <mister.freeman@laposte.net>
Signed-off-by: default avatarZhang Rui <rui.zhang@intel.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.15+
parent 24b390aa
......@@ -351,6 +351,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
/* JMicron 362B and 362C have an AHCI function with IDE class code */
{ PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
{ PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
/* May need to update quirk_jmicron_async_suspend() for additions */
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
......@@ -1451,18 +1452,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
else if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
ahci_pci_bar = AHCI_PCI_BAR_CAVIUM;
/*
* The JMicron chip 361/363 contains one SATA controller and one
* PATA controller,for powering on these both controllers, we must
* follow the sequence one by one, otherwise one of them can not be
* powered on successfully, so here we disable the async suspend
* method for these chips.
*/
if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
(pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
device_disable_async_suspend(&pdev->dev);
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
......
......@@ -143,18 +143,6 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
};
const struct ata_port_info *ppi[] = { &info, NULL };
/*
* The JMicron chip 361/363 contains one SATA controller and one
* PATA controller,for powering on these both controllers, we must
* follow the sequence one by one, otherwise one of them can not be
* powered on successfully, so here we disable the async suspend
* method for these chips.
*/
if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
(pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
device_disable_async_suspend(&pdev->dev);
return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
}
......
......@@ -1570,6 +1570,18 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB3
#endif
static void quirk_jmicron_async_suspend(struct pci_dev *dev)
{
if (dev->multifunction) {
device_disable_async_suspend(&dev->dev);
dev_info(&dev->dev, "async suspend disabled to avoid multi-function power-on ordering issue\n");
}
}
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend);
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend);
#ifdef CONFIG_X86_IO_APIC
static void quirk_alder_ioapic(struct pci_dev *pdev)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment