Merge tag 'nand/for-5.1' of git://git.infradead.org/linux-mtd into mtd/next

NAND core changes:
- Fourth batch of fixes/cleanup to the raw NAND core impacting various
  controller drivers (Sunxi, Marvell, MTK, TMIO, OMAP2).
- Checking the return code of nand_reset() and nand_readid_op().
- Removing ->legacy.erase and single_erase().
- Simplifying the locking.
- Several implicit fall through annotations.

Raw NAND controllers drivers changes:
- Fixing various possible object reference leaks (MTK, JZ4780, Atmel).
- ST:
  * Adding support for STM32 FMC2 NAND flash controller.
- Meson:
  * Adding support for Amlogic NAND flash controller.
- Denali:
  * Several cleanup patches.
- Sunxi:
  * Several cleanup patches.
- FSMC:
  * Disabling NAND on remove().
  * Resetting NAND timings on resume().

SPI-NAND drivers changes:
- Toshiba:
  * Adding support for all Toshiba products.
- Macronix:
  * Fixing ECC status read.
- Gigadevice:
  * Adding support for GD5F1GQ4UExxG.

Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt

+Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+This file documents the properties in addition to those available in
+the MTD NAND bindings.
+
+Required properties:
+- compatible : contains one of:
+  - "amlogic,meson-gxl-nfc"
+  - "amlogic,meson-axg-nfc"
+- clocks     :
+	A list of phandle + clock-specifier pairs for the clocks listed
+	in clock-names.
+
+- clock-names: Should contain the following:
+	"core" - NFC module gate clock
+	"device" - device clock from eMMC sub clock controller
+	"rx" - rx clock phase
+	"tx" - tx clock phase
+
+- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
+				controller port C
+
+Optional children nodes:
+Children nodes represent the available nand chips.
+
+Other properties:
+see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings.
+
+Example demonstrate on AXG SoC:
+
+	sd_emmc_c_clkc: mmc@7000 {
+		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
+		reg = <0x0 0x7000 0x0 0x800>;
+	};
+
+	nand-controller@7800 {
+		compatible = "amlogic,meson-axg-nfc";
+		reg = <0x0 0x7800 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+
+		clocks = <&clkc CLKID_SD_EMMC_C>,
+			<&sd_emmc_c_clkc CLKID_MMC_DIV>,
+			<&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
+			<&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
+		clock-names = "core", "device", "rx", "tx";
+		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nand_pins>;
+
+		nand@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nand-on-flash-bbt;
+		};
+	};

Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt

+STMicroelectronics Flexible Memory Controller 2 (FMC2)
+NAND Interface
+
+Required properties:
+- compatible: Should be one of:
+              * st,stm32mp15-fmc2
+- reg: NAND flash controller memory areas.
+       First region contains the register location.
+       Regions 2 to 4 respectively contain the data, command,
+       and address space for CS0.
+       Regions 5 to 7 contain the same areas for CS1.
+- interrupts: The interrupt number
+- pinctrl-0: Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
+- clocks: The clock needed by the NAND flash controller
+
+Optional properties:
+- resets: Reference to a reset controller asserting the FMC controller
+- dmas: DMA specifiers (see: dma/stm32-mdma.txt)
+- dma-names: Must be "tx", "rx" and "ecc"
+
+* NAND device bindings:
+
+Required properties:
+- reg: describes the CS lines assigned to the NAND device.
+
+Optional properties:
+- nand-on-flash-bbt: see nand.txt
+- nand-ecc-strength: see nand.txt
+- nand-ecc-step-size: see nand.txt
+
+The following ECC strength and step size are currently supported:
+ - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Hamming)
+ - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
+ - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) (default)
+
+Example:
+
+	fmc: nand-controller@58002000 {
+		compatible = "st,stm32mp15-fmc2";
+		reg = <0x58002000 0x1000>,
+		      <0x80000000 0x1000>,
+		      <0x88010000 0x1000>,
+		      <0x88020000 0x1000>,
+		      <0x81000000 0x1000>,
+		      <0x89010000 0x1000>,
+		      <0x89020000 0x1000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc FMC_K>;
+		resets = <&rcc FMC_R>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fmc_pins_a>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>;
+			nand-on-flash-bbt;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};

MAINTAINERS

@@ -9849,6 +9849,13 @@ F:	drivers/media/platform/meson/ao-cec.c
 F:	Documentation/devicetree/bindings/media/meson-ao-cec.txt
 T:	git git://linuxtv.org/media_tree.git
 
+MESON NAND CONTROLLER DRIVER FOR AMLOGIC SOCS
+M:	Liang Yang <liang.yang@amlogic.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/nand/raw/meson_*
+F:	Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
+
 MICROBLAZE ARCHITECTURE
 M:	Michal Simek <monstr@monstr.eu>
 W:	http://www.monstr.eu/fdt/

drivers/mtd/nand/raw/Kconfig

@@ -541,4 +541,21 @@ config MTD_NAND_TEGRA
 	  is supported. Extra OOB bytes when using HW ECC are currently
 	  not supported.
 
+config MTD_NAND_STM32_FMC2
+	tristate "Support for NAND controller on STM32MP SoCs"
+	depends on MACH_STM32MP157 || COMPILE_TEST
+	help
+	  Enables support for NAND Flash chips on SoCs containing the FMC2
+	  NAND controller. This controller is found on STM32MP SoCs.
+	  The controller supports a maximum 8k page size and supports
+	  a maximum 8-bit correction error per sector of 512 bytes.
+
+config MTD_NAND_MESON
+	tristate "Support for NAND controller on Amlogic's Meson SoCs"
+	depends on ARCH_MESON || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Enables support for NAND controller on Amlogic's Meson SoCs.
+	  This controller is found on Meson SoCs.
+
 endif # MTD_NAND

drivers/mtd/nand/raw/Makefile

@@ -56,6 +56,8 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand/
 obj-$(CONFIG_MTD_NAND_QCOM)		+= qcom_nandc.o
 obj-$(CONFIG_MTD_NAND_MTK)		+= mtk_ecc.o mtk_nand.o
 obj-$(CONFIG_MTD_NAND_TEGRA)		+= tegra_nand.o
+obj-$(CONFIG_MTD_NAND_STM32_FMC2)	+= stm32_fmc2_nand.o
+obj-$(CONFIG_MTD_NAND_MESON)		+= meson_nand.o
 
 nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o
 nand-objs += nand_onfi.o

drivers/mtd/nand/raw/atmel/pmecc.c

@@ -876,23 +876,32 @@ static struct atmel_pmecc *atmel_pmecc_get_by_node(struct device *userdev,
 {
 	struct platform_device *pdev;
 	struct atmel_pmecc *pmecc, **ptr;
+	int ret;
 
 	pdev = of_find_device_by_node(np);
-	if (!pdev || !platform_get_drvdata(pdev))
+	if (!pdev)
 		return ERR_PTR(-EPROBE_DEFER);
+	pmecc = platform_get_drvdata(pdev);
+	if (!pmecc) {
+		ret = -EPROBE_DEFER;
+		goto err_put_device;
+	}
 
 	ptr = devres_alloc(devm_atmel_pmecc_put, sizeof(*ptr), GFP_KERNEL);
-	if (!ptr)
-		return ERR_PTR(-ENOMEM);
-
-	get_device(&pdev->dev);
-	pmecc = platform_get_drvdata(pdev);
+	if (!ptr) {
+		ret = -ENOMEM;
+		goto err_put_device;
+	}
 
 	*ptr = pmecc;
 
 	devres_add(userdev, ptr);
 
 	return pmecc;
+
+err_put_device:
+	put_device(&pdev->dev);
+	return ERR_PTR(ret);
 }
 
 static const int atmel_pmecc_strengths[] = { 2, 4, 8, 12, 24, 32 };

drivers/mtd/nand/raw/denali.c

@@ -37,9 +37,6 @@
 #define DENALI_MAP11_ADDR	((DENALI_MAP11) | 1)	/* address cycle */
 #define DENALI_MAP11_DATA	((DENALI_MAP11) | 2)	/* data cycle */
 
-/* MAP10 commands */
-#define DENALI_ERASE		0x01
-
 #define DENALI_BANK(denali)	((denali)->active_bank << 24)
 
 #define DENALI_INVALID_BANK	-1
@@ -476,7 +473,7 @@ static void denali_setup_dma32(struct denali_nand_info *denali,
 }
 
 static int denali_pio_read(struct denali_nand_info *denali, void *buf,
-			   size_t size, int page, int raw)
+			   size_t size, int page)
 {
 	u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
 	uint32_t *buf32 = (uint32_t *)buf;
@@ -504,7 +501,7 @@ static int denali_pio_read(struct denali_nand_info *denali, void *buf,
 }
 
 static int denali_pio_write(struct denali_nand_info *denali,
-			    const void *buf, size_t size, int page, int raw)
+			    const void *buf, size_t size, int page)
 {
 	u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
 	const uint32_t *buf32 = (uint32_t *)buf;
@@ -525,16 +522,16 @@ static int denali_pio_write(struct denali_nand_info *denali,
 }
 
 static int denali_pio_xfer(struct denali_nand_info *denali, void *buf,
-			   size_t size, int page, int raw, int write)
+			   size_t size, int page, int write)
 {
 	if (write)
-		return denali_pio_write(denali, buf, size, page, raw);
+		return denali_pio_write(denali, buf, size, page);
 	else
-		return denali_pio_read(denali, buf, size, page, raw);
+		return denali_pio_read(denali, buf, size, page);
 }
 
 static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
-			   size_t size, int page, int raw, int write)
+			   size_t size, int page, int write)
 {
 	dma_addr_t dma_addr;
 	uint32_t irq_mask, irq_status, ecc_err_mask;
@@ -544,7 +541,7 @@ static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
 	dma_addr = dma_map_single(denali->dev, buf, size, dir);
 	if (dma_mapping_error(denali->dev, dma_addr)) {
 		dev_dbg(denali->dev, "Failed to DMA-map buffer. Trying PIO.\n");
-		return denali_pio_xfer(denali, buf, size, page, raw, write);
+		return denali_pio_xfer(denali, buf, size, page, write);
 	}
 
 	if (write) {
@@ -598,9 +595,9 @@ static int denali_data_xfer(struct denali_nand_info *denali, void *buf,
 		  denali->reg + TRANSFER_SPARE_REG);
 
 	if (denali->dma_avail)
-		return denali_dma_xfer(denali, buf, size, page, raw, write);
+		return denali_dma_xfer(denali, buf, size, page, write);
 	else
-		return denali_pio_xfer(denali, buf, size, page, raw, write);
+		return denali_pio_xfer(denali, buf, size, page, write);
 }
 
 static void denali_oob_xfer(struct mtd_info *mtd, struct nand_chip *chip,
@@ -754,9 +751,6 @@ static int denali_read_oob(struct nand_chip *chip, int page)
 static int denali_write_oob(struct nand_chip *chip, int page)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct denali_nand_info *denali = mtd_to_denali(mtd);
-
-	denali_reset_irq(denali);
 
 	denali_oob_xfer(mtd, chip, page, 1);
 
@@ -903,23 +897,6 @@ static int denali_waitfunc(struct nand_chip *chip)
 	return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL;
 }
 
-static int denali_erase(struct nand_chip *chip, int page)
-{
-	struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
-	uint32_t irq_status;
-
-	denali_reset_irq(denali);
-
-	denali->host_write(denali, DENALI_MAP10 | DENALI_BANK(denali) | page,
-			   DENALI_ERASE);
-
-	/* wait for erase to complete or failure to occur */
-	irq_status = denali_wait_for_irq(denali,
-					 INTR__ERASE_COMP | INTR__ERASE_FAIL);
-
-	return irq_status & INTR__ERASE_COMP ? 0 : -EIO;
-}
-
 static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
 				       const struct nand_data_interface *conf)
 {
@@ -1244,7 +1221,6 @@ static int denali_attach_chip(struct nand_chip *chip)
 	chip->ecc.write_page_raw = denali_write_page_raw;
 	chip->ecc.read_oob = denali_read_oob;
 	chip->ecc.write_oob = denali_write_oob;
-	chip->legacy.erase = denali_erase;
 
 	ret = denali_multidev_fixup(denali);
 	if (ret)

drivers/mtd/nand/raw/denali.h

@@ -304,7 +304,6 @@ struct denali_nand_info {
 	u32 irq_status;			/* interrupts that have happened */
 	int irq;
 	void *buf;			/* for syndrome layout conversion */
-	dma_addr_t dma_addr;
 	int dma_avail;			/* can support DMA? */
 	int devs_per_cs;		/* devices connected in parallel */
 	int oob_skip_bytes;		/* number of bytes reserved for BBM */

drivers/mtd/nand/raw/denali_dt.c

@@ -109,25 +109,17 @@ static int denali_dt_probe(struct platform_device *pdev)
 	if (IS_ERR(denali->host))
 		return PTR_ERR(denali->host);
 
-	/*
-	 * A single anonymous clock is supported for the backward compatibility.
-	 * New platforms should support all the named clocks.
-	 */
 	dt->clk = devm_clk_get(dev, "nand");
 	if (IS_ERR(dt->clk))
-		dt->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(dt->clk)) {
-		dev_err(dev, "no clk available\n");
 		return PTR_ERR(dt->clk);
-	}
 
 	dt->clk_x = devm_clk_get(dev, "nand_x");
 	if (IS_ERR(dt->clk_x))
-		dt->clk_x = NULL;
+		return PTR_ERR(dt->clk_x);
 
 	dt->clk_ecc = devm_clk_get(dev, "ecc");
 	if (IS_ERR(dt->clk_ecc))
-		dt->clk_ecc = NULL;
+		return PTR_ERR(dt->clk_ecc);
 
 	ret = clk_prepare_enable(dt->clk);
 	if (ret)
@@ -141,19 +133,8 @@ static int denali_dt_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_disable_clk_x;
 
-	if (dt->clk_x) {
 	denali->clk_rate = clk_get_rate(dt->clk);
 	denali->clk_x_rate = clk_get_rate(dt->clk_x);
-	} else {
-		/*
-		 * Hardcode the clock rates for the backward compatibility.
-		 * This works for both SOCFPGA and UniPhier.
-		 */
-		dev_notice(dev,
-			   "necessary clock is missing. default clock rates are used.\n");
-		denali->clk_rate = 50000000;
-		denali->clk_x_rate = 200000000;
-	}
 
 	ret = denali_init(denali);
 	if (ret)

drivers/mtd/nand/raw/fsmc_nand.c

@@ -986,6 +986,19 @@ static const struct nand_controller_ops fsmc_nand_controller_ops = {
 	.setup_data_interface = fsmc_setup_data_interface,
 };
 
+/**
+ * fsmc_nand_disable() - Disables the NAND bank
+ * @host: The instance to disable
+ */
+static void fsmc_nand_disable(struct fsmc_nand_data *host)
+{
+	u32 val;
+
+	val = readl(host->regs_va + FSMC_PC);
+	val &= ~FSMC_ENABLE;
+	writel(val, host->regs_va + FSMC_PC);
+}
+
 /*
  * fsmc_nand_probe - Probe function
  * @pdev:       platform device structure
@@ -1141,6 +1154,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 	if (host->mode == USE_DMA_ACCESS)
 		dma_release_channel(host->read_dma_chan);
 disable_clk:
+	fsmc_nand_disable(host);
 	clk_disable_unprepare(host->clk);
 
 	return ret;
@@ -1155,6 +1169,7 @@ static int fsmc_nand_remove(struct platform_device *pdev)
 
 	if (host) {
 		nand_release(&host->nand);
+		fsmc_nand_disable(host);
 
 		if (host->mode == USE_DMA_ACCESS) {
 			dma_release_channel(host->write_dma_chan);
@@ -1185,6 +1200,7 @@ static int fsmc_nand_resume(struct device *dev)
 		clk_prepare_enable(host->clk);
 		if (host->dev_timings)
 			fsmc_nand_setup(host, host->dev_timings);
+		nand_reset(&host->nand, 0);
 	}
 
 	return 0;

drivers/mtd/nand/raw/jz4780_bch.c

@@ -281,12 +281,15 @@ static struct jz4780_bch *jz4780_bch_get(struct device_node *np)
 	struct jz4780_bch *bch;
 
 	pdev = of_find_device_by_node(np);
-	if (!pdev || !platform_get_drvdata(pdev))
+	if (!pdev)
 		return ERR_PTR(-EPROBE_DEFER);
 
-	get_device(&pdev->dev);
-
 	bch = platform_get_drvdata(pdev);
+	if (!bch) {
+		put_device(&pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
+
 	clk_prepare_enable(bch->clk);
 
 	return bch;

drivers/mtd/nand/raw/marvell_nand.c

@@ -2550,9 +2550,8 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
 	}
 
 	/* Alloc the nand chip structure */
-	marvell_nand = devm_kzalloc(dev, sizeof(*marvell_nand) +
-				    (nsels *
-				     sizeof(struct marvell_nand_chip_sel)),
+	marvell_nand = devm_kzalloc(dev,
+				    struct_size(marvell_nand, sels, nsels),
 				    GFP_KERNEL);
 	if (!marvell_nand) {
 		dev_err(dev, "could not allocate chip structure\n");

drivers/mtd/nand/raw/mtk_ecc.c

@@ -267,11 +267,15 @@ static struct mtk_ecc *mtk_ecc_get(struct device_node *np)
 	struct mtk_ecc *ecc;
 
 	pdev = of_find_device_by_node(np);
-	if (!pdev || !platform_get_drvdata(pdev))
+	if (!pdev)
 		return ERR_PTR(-EPROBE_DEFER);
 
-	get_device(&pdev->dev);
 	ecc = platform_get_drvdata(pdev);
+	if (!ecc) {
+		put_device(&pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
+
 	clk_prepare_enable(ecc->clk);
 	mtk_ecc_hw_init(ecc);
 

drivers/mtd/nand/raw/mtk_nand.c

@@ -1451,8 +1451,7 @@ static int mtk_nfc_probe(struct platform_device *pdev)
 	if (!nfc)
 		return -ENOMEM;
 
-	spin_lock_init(&nfc->controller.lock);
-	init_waitqueue_head(&nfc->controller.wq);
+	nand_controller_init(&nfc->controller);
 	INIT_LIST_HEAD(&nfc->chips);
 	nfc->controller.ops = &mtk_nfc_controller_ops;
 

drivers/mtd/nand/raw/nand_base.c

@@ -278,11 +278,8 @@ EXPORT_SYMBOL_GPL(nand_deselect_target);
 static void nand_release_device(struct nand_chip *chip)
 {
 	/* Release the controller and the chip */
-	spin_lock(&chip->controller->lock);
-	chip->controller->active = NULL;
-	chip->state = FL_READY;
-	wake_up(&chip->controller->wq);
-	spin_unlock(&chip->controller->lock);
+	mutex_unlock(&chip->controller->lock);
+	mutex_unlock(&chip->lock);
 }
 
 /**
@@ -330,58 +327,24 @@ static int nand_isbad_bbm(struct nand_chip *chip, loff_t ofs)
 	return nand_block_bad(chip, ofs);
 }
 
-/**
- * panic_nand_get_device - [GENERIC] Get chip for selected access
- * @chip: the nand chip descriptor
- * @new_state: the state which is requested
- *
- * Used when in panic, no locks are taken.
- */
-static void panic_nand_get_device(struct nand_chip *chip, int new_state)
-{
-	/* Hardware controller shared among independent devices */
-	chip->controller->active = chip;
-	chip->state = new_state;
-}
-
 /**
  * nand_get_device - [GENERIC] Get chip for selected access
  * @chip: NAND chip structure
- * @new_state: the state which is requested
  *
- * Get the device and lock it for exclusive access
+ * Lock the device and its controller for exclusive access
+ *
+ * Return: -EBUSY if the chip has been suspended, 0 otherwise
  */
-static int
-nand_get_device(struct nand_chip *chip, int new_state)
+static int nand_get_device(struct nand_chip *chip)
 {
-	spinlock_t *lock = &chip->controller->lock;
-	wait_queue_head_t *wq = &chip->controller->wq;
-	DECLARE_WAITQUEUE(wait, current);
-retry:
-	spin_lock(lock);
-
-	/* Hardware controller shared among independent devices */
-	if (!chip->controller->active)
-		chip->controller->active = chip;
-
-	if (chip->controller->active == chip && chip->state == FL_READY) {
-		chip->state = new_state;
-		spin_unlock(lock);
-		return 0;
+	mutex_lock(&chip->lock);
+	if (chip->suspended) {
+		mutex_unlock(&chip->lock);
+		return -EBUSY;
 	}
-	if (new_state == FL_PM_SUSPENDED) {
-		if (chip->controller->active->state == FL_PM_SUSPENDED) {
-			chip->state = FL_PM_SUSPENDED;
-			spin_unlock(lock);
+	mutex_lock(&chip->controller->lock);
+
 	return 0;
-		}
-	}
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	add_wait_queue(wq, &wait);
-	spin_unlock(lock);
-	schedule();
-	remove_wait_queue(wq, &wait);
-	goto retry;
 }
 
 /**
@@ -457,7 +420,7 @@ static int nand_do_write_oob(struct nand_chip *chip, loff_t to,
 			     struct mtd_oob_ops *ops)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	int chipnr, page, status, len;
+	int chipnr, page, status, len, ret;
 
 	pr_debug("%s: to = 0x%08x, len = %i\n",
 			 __func__, (unsigned int)to, (int)ops->ooblen);
@@ -479,7 +442,9 @@ static int nand_do_write_oob(struct nand_chip *chip, loff_t to,
 	 * if we don't do this. I have no clue why, but I seem to have 'fixed'
 	 * it in the doc2000 driver in August 1999.  dwmw2.
 	 */
-	nand_reset(chip, chipnr);
+	ret = nand_reset(chip, chipnr);
+	if (ret)
+		return ret;
 
 	nand_select_target(chip, chipnr);
 
@@ -602,7 +567,10 @@ static int nand_block_markbad_lowlevel(struct nand_chip *chip, loff_t ofs)
 		nand_erase_nand(chip, &einfo, 0);
 
 		/* Write bad block marker to OOB */
-		nand_get_device(chip, FL_WRITING);
+		ret = nand_get_device(chip);
+		if (ret)
+			return ret;
+
 		ret = nand_markbad_bbm(chip, ofs);
 		nand_release_device(chip);
 	}
@@ -3580,7 +3548,9 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from,
 	    ops->mode != MTD_OPS_RAW)
 		return -ENOTSUPP;
 
-	nand_get_device(chip, FL_READING);
+	ret = nand_get_device(chip);
+	if (ret)
+		return ret;
 
 	if (!ops->datbuf)
 		ret = nand_do_read_oob(chip, from, ops);
@@ -4099,9 +4069,6 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 	struct mtd_oob_ops ops;
 	int ret;
 
-	/* Grab the device */
-	panic_nand_get_device(chip, FL_WRITING);
-
 	nand_select_target(chip, chipnr);
 
 	/* Wait for the device to get ready */
@@ -4132,7 +4099,9 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
 
 	ops->retlen = 0;
 
-	nand_get_device(chip, FL_WRITING);
+	ret = nand_get_device(chip);
+	if (ret)
+		return ret;
 
 	switch (ops->mode) {
 	case MTD_OPS_PLACE_OOB:
@@ -4154,23 +4123,6 @@ static int nand_write_oob(struct mtd_info *mtd, loff_t to,
 	return ret;
 }
 
-/**
- * single_erase - [GENERIC] NAND standard block erase command function
- * @chip: NAND chip object
- * @page: the page address of the block which will be erased
- *
- * Standard erase command for NAND chips. Returns NAND status.
- */
-static int single_erase(struct nand_chip *chip, int page)
-{
-	unsigned int eraseblock;
-
-	/* Send commands to erase a block */
-	eraseblock = page >> (chip->phys_erase_shift - chip->page_shift);
-
-	return nand_erase_op(chip, eraseblock);
-}
-
 /**
  * nand_erase - [MTD Interface] erase block(s)
  * @mtd: MTD device structure
@@ -4194,7 +4146,7 @@ static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
 int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
 		    int allowbbt)
 {
-	int page, status, pages_per_block, ret, chipnr;
+	int page, pages_per_block, ret, chipnr;
 	loff_t len;
 
 	pr_debug("%s: start = 0x%012llx, len = %llu\n",
@@ -4205,7 +4157,9 @@ int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
 		return -EINVAL;
 
 	/* Grab the lock and see if the device is available */
-	nand_get_device(chip, FL_ERASING);
+	ret = nand_get_device(chip);
+	if (ret)
+		return ret;
 
 	/* Shift to get first page */
 	page = (int)(instr->addr >> chip->page_shift);
@@ -4246,17 +4200,11 @@ int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
 		    (page + pages_per_block))
 			chip->pagebuf = -1;
 
-		if (chip->legacy.erase)
-			status = chip->legacy.erase(chip,
-						    page & chip->pagemask);
-		else
-			status = single_erase(chip, page & chip->pagemask);
-
-		/* See if block erase succeeded */
-		if (status) {
+		ret = nand_erase_op(chip, (page & chip->pagemask) >>
+				    (chip->phys_erase_shift - chip->page_shift));
+		if (ret) {
 			pr_debug("%s: failed erase, page 0x%08x\n",
 					__func__, page);
-			ret = -EIO;
 			instr->fail_addr =
 				((loff_t)page << chip->page_shift);
 			goto erase_exit;
@@ -4298,7 +4246,7 @@ static void nand_sync(struct mtd_info *mtd)
 	pr_debug("%s: called\n", __func__);
 
 	/* Grab the lock and see if the device is available */
-	nand_get_device(chip, FL_SYNCING);
+	WARN_ON(nand_get_device(chip));
 	/* Release it and go back */
 	nand_release_device(chip);
 }
@@ -4315,7 +4263,10 @@ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
 	int ret;
 
 	/* Select the NAND device */
-	nand_get_device(chip, FL_READING);
+	ret = nand_get_device(chip);
+	if (ret)
+		return ret;
+
 	nand_select_target(chip, chipnr);
 
 	ret = nand_block_checkbad(chip, offs, 0);
@@ -4388,7 +4339,13 @@ static int nand_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
  */
 static int nand_suspend(struct mtd_info *mtd)
 {
-	return nand_get_device(mtd_to_nand(mtd), FL_PM_SUSPENDED);
+	struct nand_chip *chip = mtd_to_nand(mtd);
+
+	mutex_lock(&chip->lock);
+	chip->suspended = 1;
+	mutex_unlock(&chip->lock);
+
+	return 0;
 }
 
 /**
@@ -4399,11 +4356,13 @@ static void nand_resume(struct mtd_info *mtd)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
 
-	if (chip->state == FL_PM_SUSPENDED)
-		nand_release_device(chip);
+	mutex_lock(&chip->lock);
+	if (chip->suspended)
+		chip->suspended = 0;
 	else
 		pr_err("%s called for a chip which is not in suspended state\n",
 			__func__);
+	mutex_unlock(&chip->lock);
 }
 
 /**
@@ -4413,7 +4372,7 @@ static void nand_resume(struct mtd_info *mtd)
  */
 static void nand_shutdown(struct mtd_info *mtd)
 {
-	nand_get_device(mtd_to_nand(mtd), FL_PM_SUSPENDED);
+	nand_suspend(mtd);
 }
 
 /* Set default functions */
@@ -5018,6 +4977,8 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
 	/* Assume all dies are deselected when we enter nand_scan_ident(). */
 	chip->cur_cs = -1;
 
+	mutex_init(&chip->lock);
+
 	/* Enforce the right timings for reset/detection */
 	onfi_fill_data_interface(chip, NAND_SDR_IFACE, 0);
 
@@ -5060,11 +5021,15 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
 		u8 id[2];
 
 		/* See comment in nand_get_flash_type for reset */
-		nand_reset(chip, i);
+		ret = nand_reset(chip, i);
+		if (ret)
+			break;
 
 		nand_select_target(chip, i);
 		/* Send the command for reading device ID */
-		nand_readid_op(chip, 0, id, sizeof(id));
+		ret = nand_readid_op(chip, 0, id, sizeof(id));
+		if (ret)
+			break;
 		/* Read manufacturer and device IDs */
 		if (nand_maf_id != id[0] || nand_dev_id != id[1]) {
 			nand_deselect_target(chip);
@@ -5555,6 +5520,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 		}
 		if (!ecc->read_page)
 			ecc->read_page = nand_read_page_hwecc_oob_first;
+		/* fall through */
 
 	case NAND_ECC_HW:
 		/* Use standard hwecc read page function? */
@@ -5574,6 +5540,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 			ecc->read_subpage = nand_read_subpage;
 		if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
 			ecc->write_subpage = nand_write_subpage_hwecc;
+		/* fall through */
 
 	case NAND_ECC_HW_SYNDROME:
 		if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
@@ -5611,6 +5578,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 			ecc->size, mtd->writesize);
 		ecc->mode = NAND_ECC_SOFT;
 		ecc->algo = NAND_ECC_HAMMING;
+		/* fall through */
 
 	case NAND_ECC_SOFT:
 		ret = nand_set_ecc_soft_ops(chip);
@@ -5717,9 +5685,6 @@ static int nand_scan_tail(struct nand_chip *chip)
 	}
 	chip->subpagesize = mtd->writesize >> mtd->subpage_sft;
 
-	/* Initialize state */
-	chip->state = FL_READY;
-
 	/* Invalidate the pagebuffer reference */
 	chip->pagebuf = -1;
 

drivers/mtd/nand/raw/nand_legacy.c

@@ -331,6 +331,7 @@ static void nand_command(struct nand_chip *chip, unsigned int command,
 		 */
 		if (column == -1 && page_addr == -1)
 			return;
+		/* fall through */
 
 	default:
 		/*
@@ -483,7 +484,7 @@ static void nand_command_lp(struct nand_chip *chip, unsigned int command,
 		chip->legacy.cmd_ctrl(chip, NAND_CMD_NONE,
 				      NAND_NCE | NAND_CTRL_CHANGE);
 
-		/* This applies to read commands */
+		/* fall through - This applies to read commands */
 	default:
 		/*
 		 * If we don't have access to the busy pin, we apply the given

drivers/mtd/nand/raw/omap2.c

@@ -994,12 +994,9 @@ static int omap_wait(struct nand_chip *this)
 {
 	struct omap_nand_info *info = mtd_to_omap(nand_to_mtd(this));
 	unsigned long timeo = jiffies;
-	int status, state = this->state;
+	int status;
 
-	if (state == FL_ERASING)
 	timeo += msecs_to_jiffies(400);
-	else
-		timeo += msecs_to_jiffies(20);
 
 	writeb(NAND_CMD_STATUS & 0xFF, info->reg.gpmc_nand_command);
 	while (time_before(jiffies, timeo)) {
@@ -2173,11 +2170,8 @@ static const struct nand_controller_ops omap_nand_controller_ops = {
 };
 
 /* Shared among all NAND instances to synchronize access to the ECC Engine */
-static struct nand_controller omap_gpmc_controller = {
-	.lock = __SPIN_LOCK_UNLOCKED(omap_gpmc_controller.lock),
-	.wq = __WAIT_QUEUE_HEAD_INITIALIZER(omap_gpmc_controller.wq),
-	.ops = &omap_nand_controller_ops,
-};
+static struct nand_controller omap_gpmc_controller;
+static bool omap_gpmc_controller_initialized;
 
 static int omap_nand_probe(struct platform_device *pdev)
 {
@@ -2227,6 +2221,12 @@ static int omap_nand_probe(struct platform_device *pdev)
 
 	info->phys_base = res->start;
 
+	if (!omap_gpmc_controller_initialized) {
+		omap_gpmc_controller.ops = &omap_nand_controller_ops;
+		nand_controller_init(&omap_gpmc_controller);
+		omap_gpmc_controller_initialized = true;
+	}
+
 	nand_chip->controller = &omap_gpmc_controller;
 
 	nand_chip->legacy.IO_ADDR_W = nand_chip->legacy.IO_ADDR_R;

drivers/mtd/nand/raw/r852.c

@@ -369,8 +369,7 @@ static int r852_wait(struct nand_chip *chip)
 	unsigned long timeout;
 	u8 status;
 
-	timeout = jiffies + (chip->state == FL_ERASING ?
-		msecs_to_jiffies(400) : msecs_to_jiffies(20));
+	timeout = jiffies + msecs_to_jiffies(400);
 
 	while (time_before(jiffies, timeout))
 		if (chip->legacy.dev_ready(chip))

drivers/mtd/nand/raw/tmio_nand.c

@@ -104,6 +104,7 @@
 
 struct tmio_nand {
 	struct nand_chip chip;
+	struct completion comp;
 
 	struct platform_device *dev;
 
@@ -168,15 +169,11 @@ static int tmio_nand_dev_ready(struct nand_chip *chip)
 static irqreturn_t tmio_irq(int irq, void *__tmio)
 {
 	struct tmio_nand *tmio = __tmio;
-	struct nand_chip *nand_chip = &tmio->chip;
 
 	/* disable RDYREQ interrupt */
 	tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+	complete(&tmio->comp);
 
-	if (unlikely(!waitqueue_active(&nand_chip->controller->wq)))
-		dev_warn(&tmio->dev->dev, "spurious interrupt\n");
-
-	wake_up(&nand_chip->controller->wq);
 	return IRQ_HANDLED;
 }
 
@@ -193,18 +190,18 @@ static int tmio_nand_wait(struct nand_chip *nand_chip)
 	u8 status;
 
 	/* enable RDYREQ interrupt */
+
 	tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+	reinit_completion(&tmio->comp);
 	tmio_iowrite8(0x81, tmio->fcr + FCR_IMR);
 
-	timeout = wait_event_timeout(nand_chip->controller->wq,
-		tmio_nand_dev_ready(nand_chip),
-		msecs_to_jiffies(nand_chip->state == FL_ERASING ? 400 : 20));
+	timeout = 400;
+	timeout = wait_for_completion_timeout(&tmio->comp,
+					      msecs_to_jiffies(timeout));
 
 	if (unlikely(!tmio_nand_dev_ready(nand_chip))) {
 		tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
-		dev_warn(&tmio->dev->dev, "still busy with %s after %d ms\n",
-			nand_chip->state == FL_ERASING ? "erase" : "program",
-			nand_chip->state == FL_ERASING ? 400 : 20);
+		dev_warn(&tmio->dev->dev, "still busy after 400 ms\n");
 
 	} else if (unlikely(!timeout)) {
 		tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
@@ -378,6 +375,8 @@ static int tmio_probe(struct platform_device *dev)
 	if (!tmio)
 		return -ENOMEM;
 
+	init_completion(&tmio->comp);
+
 	tmio->dev = dev;
 
 	platform_set_drvdata(dev, tmio);

drivers/mtd/nand/spi/gigadevice.c

@@ -12,6 +12,8 @@
 #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
 #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
 
+#define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -81,11 +83,83 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
 	return -EINVAL;
 }
 
+static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
+				       struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = 64;
+	region->length = 64;
+
+	return 0;
+}
+
+static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
+					struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	/* Reserve 1 bytes for the BBM. */
+	region->offset = 1;
+	region->length = 63;
+
+	return 0;
+}
+
+static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
+					u8 status)
+{
+	u8 status2;
+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQ4UEXXG_REG_STATUS2,
+						      &status2);
+	int ret;
+
+	switch (status & STATUS_ECC_MASK) {
+	case STATUS_ECC_NO_BITFLIPS:
+		return 0;
+
+	case GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS:
+		/*
+		 * Read status2 register to determine a more fine grained
+		 * bit error status
+		 */
+		ret = spi_mem_exec_op(spinand->spimem, &op);
+		if (ret)
+			return ret;
+
+		/*
+		 * 4 ... 7 bits are flipped (1..4 can't be detected, so
+		 * report the maximum of 4 in this case
+		 */
+		/* bits sorted this way (3...0): ECCS1,ECCS0,ECCSE1,ECCSE0 */
+		return ((status & STATUS_ECC_MASK) >> 2) |
+			((status2 & STATUS_ECC_MASK) >> 4);
+
+	case GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS:
+		return 8;
+
+	case STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
 static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
 	.ecc = gd5fxgq4xa_ooblayout_ecc,
 	.free = gd5fxgq4xa_ooblayout_free,
 };
 
+static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
+	.ecc = gd5fxgq4uexxg_ooblayout_ecc,
+	.free = gd5fxgq4uexxg_ooblayout_free,
+};
+
 static const struct spinand_info gigadevice_spinand_table[] = {
 	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
@@ -114,6 +188,15 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
+	SPINAND_INFO("GD5F1GQ4UExxG", 0xd1,
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
+				     gd5fxgq4uexxg_ecc_get_status)),
 };
 
 static int gigadevice_spinand_detect(struct spinand_device *spinand)

drivers/mtd/nand/spi/macronix.c

@@ -10,6 +10,7 @@
 #include <linux/mtd/spinand.h>
 
 #define SPINAND_MFR_MACRONIX		0xC2
+#define MACRONIX_ECCSR_MASK		0x0F
 
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -55,7 +56,12 @@ static int mx35lf1ge4ab_get_eccsr(struct spinand_device *spinand, u8 *eccsr)
 					  SPI_MEM_OP_DUMMY(1, 1),
 					  SPI_MEM_OP_DATA_IN(1, eccsr, 1));
 
-	return spi_mem_exec_op(spinand->spimem, &op);
+	int ret = spi_mem_exec_op(spinand->spimem, &op);
+	if (ret)
+		return ret;
+
+	*eccsr &= MACRONIX_ECCSR_MASK;
+	return 0;
 }
 
 static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,

drivers/mtd/nand/spi/toshiba.c

@@ -25,19 +25,19 @@ static SPINAND_OP_VARIANTS(write_cache_variants,
 static SPINAND_OP_VARIANTS(update_cache_variants,
 		SPINAND_PROG_LOAD(false, 0, NULL, 0));
 
-static int tc58cvg2s0h_ooblayout_ecc(struct mtd_info *mtd, int section,
+static int tc58cxgxsx_ooblayout_ecc(struct mtd_info *mtd, int section,
 				     struct mtd_oob_region *region)
 {
-	if (section > 7)
+	if (section > 0)
 		return -ERANGE;
 
-	region->offset = 128 + 16 * section;
-	region->length = 16;
+	region->offset = mtd->oobsize / 2;
+	region->length = mtd->oobsize / 2;
 
 	return 0;
 }
 
-static int tc58cvg2s0h_ooblayout_free(struct mtd_info *mtd, int section,
+static int tc58cxgxsx_ooblayout_free(struct mtd_info *mtd, int section,
 				      struct mtd_oob_region *region)
 {
 	if (section > 0)
@@ -45,17 +45,17 @@ static int tc58cvg2s0h_ooblayout_free(struct mtd_info *mtd, int section,
 
 	/* 2 bytes reserved for BBM */
 	region->offset = 2;
-	region->length = 126;
+	region->length = (mtd->oobsize / 2) - 2;
 
 	return 0;
 }
 
-static const struct mtd_ooblayout_ops tc58cvg2s0h_ooblayout = {
-	.ecc = tc58cvg2s0h_ooblayout_ecc,
-	.free = tc58cvg2s0h_ooblayout_free,
+static const struct mtd_ooblayout_ops tc58cxgxsx_ooblayout = {
+	.ecc = tc58cxgxsx_ooblayout_ecc,
+	.free = tc58cxgxsx_ooblayout_free,
 };
 
-static int tc58cvg2s0h_ecc_get_status(struct spinand_device *spinand,
+static int tc58cxgxsx_ecc_get_status(struct spinand_device *spinand,
 				      u8 status)
 {
 	struct nand_device *nand = spinand_to_nand(spinand);
@@ -94,15 +94,66 @@ static int tc58cvg2s0h_ecc_get_status(struct spinand_device *spinand,
 }
 
 static const struct spinand_info toshiba_spinand_table[] = {
-	SPINAND_INFO("TC58CVG2S0H", 0xCD,
+	/* 3.3V 1Gb */
+	SPINAND_INFO("TC58CVG0S3", 0xC2,
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+				     tc58cxgxsx_ecc_get_status)),
+	/* 3.3V 2Gb */
+	SPINAND_INFO("TC58CVG1S3", 0xCB,
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+				     tc58cxgxsx_ecc_get_status)),
+	/* 3.3V 4Gb */
+	SPINAND_INFO("TC58CVG2S0", 0xCD,
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+				     tc58cxgxsx_ecc_get_status)),
+	/* 1.8V 1Gb */
+	SPINAND_INFO("TC58CYG0S3", 0xB2,
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+				     tc58cxgxsx_ecc_get_status)),
+	/* 1.8V 2Gb */
+	SPINAND_INFO("TC58CYG1S3", 0xBB,
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+				     tc58cxgxsx_ecc_get_status)),
+	/* 1.8V 4Gb */
+	SPINAND_INFO("TC58CYG2S0", 0xBD,
 		     NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
 		     NAND_ECCREQ(8, 512),
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     SPINAND_HAS_QE_BIT,
-		     SPINAND_ECCINFO(&tc58cvg2s0h_ooblayout,
-				     tc58cvg2s0h_ecc_get_status)),
+		     0,
+		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
+				     tc58cxgxsx_ecc_get_status)),
 };
 
 static int toshiba_spinand_detect(struct spinand_device *spinand)

include/linux/mtd/rawnand.h

@@ -16,13 +16,12 @@
 #ifndef __LINUX_MTD_RAWNAND_H
 #define __LINUX_MTD_RAWNAND_H
 
-#include <linux/wait.h>
-#include <linux/spinlock.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/flashchip.h>
 #include <linux/mtd/bbm.h>
 #include <linux/mtd/jedec.h>
 #include <linux/mtd/onfi.h>
+#include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/types.h>
 
@@ -897,25 +896,17 @@ struct nand_controller_ops {
 /**
  * struct nand_controller - Structure used to describe a NAND controller
  *
- * @lock:               protection lock
- * @active:		the mtd device which holds the controller currently
- * @wq:			wait queue to sleep on if a NAND operation is in
- *			progress used instead of the per chip wait queue
- *			when a hw controller is available.
+ * @lock:		lock used to serialize accesses to the NAND controller
  * @ops:		NAND controller operations.
  */
 struct nand_controller {
-	spinlock_t lock;
-	struct nand_chip *active;
-	wait_queue_head_t wq;
+	struct mutex lock;
 	const struct nand_controller_ops *ops;
 };
 
 static inline void nand_controller_init(struct nand_controller *nfc)
 {
-	nfc->active = NULL;
-	spin_lock_init(&nfc->lock);
-	init_waitqueue_head(&nfc->wq);
+	mutex_init(&nfc->lock);
 }
 
 /**
@@ -936,7 +927,6 @@ static inline void nand_controller_init(struct nand_controller *nfc)
  * @waitfunc: hardware specific function for wait on ready.
  * @block_bad: check if a block is bad, using OOB markers
  * @block_markbad: mark a block bad
- * @erase: erase function
  * @set_features: set the NAND chip features
  * @get_features: get the NAND chip features
  * @chip_delay: chip dependent delay for transferring data from array to read
@@ -962,7 +952,6 @@ struct nand_legacy {
 	int (*waitfunc)(struct nand_chip *chip);
 	int (*block_bad)(struct nand_chip *chip, loff_t ofs);
 	int (*block_markbad)(struct nand_chip *chip, loff_t ofs);
-	int (*erase)(struct nand_chip *chip, int page);
 	int (*set_features)(struct nand_chip *chip, int feature_addr,
 			    u8 *subfeature_para);
 	int (*get_features)(struct nand_chip *chip, int feature_addr,
@@ -983,7 +972,6 @@ struct nand_legacy {
  *			setting the read-retry mode. Mostly needed for MLC NAND.
  * @ecc:		[BOARDSPECIFIC] ECC control structure
  * @buf_align:		minimum buffer alignment required by a platform
- * @state:		[INTERN] the current state of the NAND device
  * @oob_poi:		"poison value buffer," used for laying out OOB data
  *			before writing
  * @page_shift:		[INTERN] number of address bits in a page (column
@@ -1034,6 +1022,9 @@ struct nand_legacy {
  *			cur_cs < numchips. NAND Controller drivers should not
  *			modify this value, but they're allowed to read it.
  * @read_retries:	[INTERN] the number of read retry modes supported
+ * @lock:		lock protecting the suspended field. Also used to
+ *			serialize accesses to the NAND device.
+ * @suspended:		set to 1 when the device is suspended, 0 when it's not.
  * @bbt:		[INTERN] bad block table pointer
  * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash
  *			lookup.
@@ -1088,7 +1079,8 @@ struct nand_chip {
 
 	int read_retries;
 
-	flstate_t state;
+	struct mutex lock;
+	unsigned int suspended : 1;
 
 	uint8_t *oob_poi;
 	struct nand_controller *controller;