Commit 92320cec authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: export autosuspend delay in sysfs
  sysfs: allow attributes to be added to groups
  USB: make autosuspend delay a module parameter
  USB: minor cleanups for sysfs.c
  USB: add a blacklist for devices that can't handle some things we throw at them.
  USB: refactor usb device matching and create usb_device_match
  USB: Wacom driver updates
  gadgetfs: Fixed bug in ep_aio_read_retry.
  USB: Use USB defines in usbmouse.c and usbkbd.c
  USB: add rationale on why usb descriptor structures have to be packed
  USB: ftdi_sio: Adding VID and PID for Tellstick
  UHCI: Eliminate asynchronous skeleton Queue Headers
  UHCI: Add macros for computing DMA values
  USB: Davicom DM9601 usbnet driver
  USB: asix.c - Add JVC-PRX1 ids
  usbmon: Remove erroneous __exit
  USB: add driver for iowarrior devices.
  USB: option: add a bunch of new device ids
  USB: option: remove duplicate device id table
parents 63ae0e5b 19c26239
......@@ -1758,6 +1758,13 @@ and is between 256 and 4096 characters. It is defined in the file
Note that genuine overcurrent events won't be
reported either.
usbcore.autosuspend=
[USB] The autosuspend time delay (in seconds) used
for newly-detected USB devices (default 2). This
is the time required before an idle device will be
autosuspended. Devices for which the delay is set
to 0 won't be autosuspended at all.
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
......
......@@ -3392,6 +3392,13 @@ L: linux-usb-devel@lists.sourceforge.net
S: Maintained
W: http://www.kroah.com/linux-usb/
USB DAVICOM DM9601 DRIVER
P: Peter Korsgaard
M: jacmet@sunsite.dk
L: linux-usb-devel@lists.sourceforge.net
W: http://www.linux-usb.org/usbnet
S: Maintained
USB EHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
......
......@@ -4,7 +4,7 @@
usbcore-objs := usb.o hub.o hcd.o urb.o message.o driver.o \
config.o file.o buffer.o sysfs.o endpoint.o \
devio.o notify.o generic.o
devio.o notify.o generic.o quirks.o
ifeq ($(CONFIG_PCI),y)
usbcore-objs += hcd-pci.o
......
......@@ -366,19 +366,8 @@ void usb_driver_release_interface(struct usb_driver *driver,
EXPORT_SYMBOL(usb_driver_release_interface);
/* returns 0 if no match, 1 if match */
int usb_match_one_id(struct usb_interface *interface,
const struct usb_device_id *id)
int usb_match_device(struct usb_device *dev, const struct usb_device_id *id)
{
struct usb_host_interface *intf;
struct usb_device *dev;
/* proc_connectinfo in devio.c may call us with id == NULL. */
if (id == NULL)
return 0;
intf = interface->cur_altsetting;
dev = interface_to_usbdev(interface);
if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
return 0;
......@@ -409,6 +398,26 @@ int usb_match_one_id(struct usb_interface *interface,
(id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
return 0;
return 1;
}
/* returns 0 if no match, 1 if match */
int usb_match_one_id(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct usb_host_interface *intf;
struct usb_device *dev;
/* proc_connectinfo in devio.c may call us with id == NULL. */
if (id == NULL)
return 0;
intf = interface->cur_altsetting;
dev = interface_to_usbdev(interface);
if (!usb_match_device(dev, id))
return 0;
/* The interface class, subclass, and protocol should never be
* checked for a match if the device class is Vendor Specific,
* unless the match record specifies the Vendor ID. */
......@@ -954,12 +963,16 @@ static int autosuspend_check(struct usb_device *udev)
int i;
struct usb_interface *intf;
/* For autosuspend, fail fast if anything is in use.
* Also fail if any interfaces require remote wakeup but it
* isn't available. */
/* For autosuspend, fail fast if anything is in use or autosuspend
* is disabled. Also fail if any interfaces require remote wakeup
* but it isn't available.
*/
udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
if (udev->pm_usage_cnt > 0)
return -EBUSY;
if (!udev->autosuspend_delay)
return -EPERM;
if (udev->actconfig) {
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
......@@ -982,7 +995,7 @@ static int autosuspend_check(struct usb_device *udev)
#define autosuspend_check(udev) 0
#endif
#endif /* CONFIG_USB_SUSPEND */
/**
* usb_suspend_both - suspend a USB device and its interfaces
......@@ -1177,7 +1190,7 @@ static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt)
udev->pm_usage_cnt -= inc_usage_cnt;
} else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0)
queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
USB_AUTOSUSPEND_DELAY);
udev->autosuspend_delay);
usb_pm_unlock(udev);
return status;
}
......@@ -1211,6 +1224,26 @@ void usb_autosuspend_device(struct usb_device *udev)
// __FUNCTION__, udev->pm_usage_cnt);
}
/**
* usb_try_autosuspend_device - attempt an autosuspend of a USB device and its interfaces
* @udev: the usb_device to autosuspend
*
* This routine should be called when a core subsystem thinks @udev may
* be ready to autosuspend.
*
* @udev's usage counter left unchanged. If it or any of the usage counters
* for an active interface is greater than 0, or autosuspend is not allowed
* for any other reason, no autosuspend request will be queued.
*
* This routine can run only in process context.
*/
void usb_try_autosuspend_device(struct usb_device *udev)
{
usb_autopm_do_device(udev, 0);
// dev_dbg(&udev->dev, "%s: cnt %d\n",
// __FUNCTION__, udev->pm_usage_cnt);
}
/**
* usb_autoresume_device - immediately autoresume a USB device and its interfaces
* @udev: the usb_device to autoresume
......@@ -1261,7 +1294,7 @@ static int usb_autopm_do_interface(struct usb_interface *intf,
intf->pm_usage_cnt -= inc_usage_cnt;
} else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0)
queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
USB_AUTOSUSPEND_DELAY);
udev->autosuspend_delay);
}
usb_pm_unlock(udev);
return status;
......
......@@ -1287,6 +1287,9 @@ int usb_new_device(struct usb_device *udev)
if (!try_module_get(THIS_MODULE))
return -EINVAL;
/* Determine quirks */
usb_detect_quirks(udev);
err = usb_get_configuration(udev);
if (err < 0) {
dev_err(&udev->dev, "can't read configurations, error %d\n",
......
......@@ -11,6 +11,7 @@
#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/device.h>
#include <linux/usb/quirks.h>
#include <asm/byteorder.h>
#include <asm/scatterlist.h>
......@@ -685,7 +686,10 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid,
/* Try to read the string descriptor by asking for the maximum
* possible number of bytes */
rc = usb_get_string(dev, langid, index, buf, 255);
if (dev->quirks & USB_QUIRK_STRING_FETCH_255)
rc = -EIO;
else
rc = usb_get_string(dev, langid, index, buf, 255);
/* If that failed try to read the descriptor length, then
* ask for just that many bytes */
......
/*
* USB device quirk handling logic and table
*
* Copyright (c) 2007 Oliver Neukum
* Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
*
*/
#include <linux/usb.h>
#include <linux/usb/quirks.h>
#include "usb.h"
/* List of quirky USB devices. Please keep this list ordered by:
* 1) Vendor ID
* 2) Product ID
* 3) Class ID
*
* as we want specific devices to be overridden first, and only after that, any
* class specific quirks.
*
* Right now the logic aborts if it finds a valid device in the table, we might
* want to change that in the future if it turns out that a whole class of
* devices is broken...
*/
static const struct usb_device_id usb_quirk_list[] = {
/* HP 5300/5370C scanner */
{ USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 },
/* Elsa MicroLink 56k (V.250) */
{ USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_NO_AUTOSUSPEND },
{ } /* terminating entry must be last */
};
static void usb_autosuspend_quirk(struct usb_device *udev)
{
#ifdef CONFIG_USB_SUSPEND
/* disable autosuspend, but allow the user to re-enable it via sysfs */
udev->autosuspend_delay = 0;
#endif
}
static const struct usb_device_id *find_id(struct usb_device *udev)
{
const struct usb_device_id *id = usb_quirk_list;
for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass ||
id->driver_info; id++) {
if (usb_match_device(udev, id))
return id;
}
return NULL;
}
/*
* Detect any quirks the device has, and do any housekeeping for it if needed.
*/
void usb_detect_quirks(struct usb_device *udev)
{
const struct usb_device_id *id = usb_quirk_list;
id = find_id(udev);
if (id)
udev->quirks = (u32)(id->driver_info);
if (udev->quirks)
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
udev->quirks);
/* do any special quirk handling here if needed */
if (udev->quirks & USB_QUIRK_NO_AUTOSUSPEND)
usb_autosuspend_quirk(udev);
}
......@@ -148,6 +148,75 @@ show_maxchild(struct device *dev, struct device_attribute *attr, char *buf)
}
static DEVICE_ATTR(maxchild, S_IRUGO, show_maxchild, NULL);
static ssize_t
show_quirks(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_device *udev;
udev = to_usb_device(dev);
return sprintf(buf, "0x%x\n", udev->quirks);
}
static DEVICE_ATTR(quirks, S_IRUGO, show_quirks, NULL);
#ifdef CONFIG_USB_SUSPEND
static ssize_t
show_autosuspend(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_device *udev = to_usb_device(dev);
return sprintf(buf, "%u\n", udev->autosuspend_delay / HZ);
}
static ssize_t
set_autosuspend(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct usb_device *udev = to_usb_device(dev);
unsigned value, old;
if (sscanf(buf, "%u", &value) != 1 || value >= INT_MAX/HZ)
return -EINVAL;
value *= HZ;
old = udev->autosuspend_delay;
udev->autosuspend_delay = value;
if (value > 0 && old == 0)
usb_try_autosuspend_device(udev);
return count;
}
static DEVICE_ATTR(autosuspend, S_IRUGO | S_IWUSR,
show_autosuspend, set_autosuspend);
static char power_group[] = "power";
static int add_power_attributes(struct device *dev)
{
int rc = 0;
if (is_usb_device(dev))
rc = sysfs_add_file_to_group(&dev->kobj,
&dev_attr_autosuspend.attr,
power_group);
return rc;
}
static void remove_power_attributes(struct device *dev)
{
sysfs_remove_file_from_group(&dev->kobj,
&dev_attr_autosuspend.attr,
power_group);
}
#else
#define add_power_attributes(dev) 0
#define remove_power_attributes(dev) do {} while (0)
#endif /* CONFIG_USB_SUSPEND */
/* Descriptor fields */
#define usb_descriptor_attr_le16(field, format_string) \
static ssize_t \
......@@ -204,6 +273,7 @@ static struct attribute *dev_attrs[] = {
&dev_attr_devnum.attr,
&dev_attr_version.attr,
&dev_attr_maxchild.attr,
&dev_attr_quirks.attr,
NULL,
};
static struct attribute_group dev_attr_grp = {
......@@ -219,6 +289,10 @@ int usb_create_sysfs_dev_files(struct usb_device *udev)
if (retval)
return retval;
retval = add_power_attributes(dev);
if (retval)
goto error;
if (udev->manufacturer) {
retval = device_create_file(dev, &dev_attr_manufacturer);
if (retval)
......@@ -239,10 +313,7 @@ int usb_create_sysfs_dev_files(struct usb_device *udev)
goto error;
return 0;
error:
usb_remove_ep_files(&udev->ep0);
device_remove_file(dev, &dev_attr_manufacturer);
device_remove_file(dev, &dev_attr_product);
device_remove_file(dev, &dev_attr_serial);
usb_remove_sysfs_dev_files(udev);
return retval;
}
......@@ -251,14 +322,11 @@ void usb_remove_sysfs_dev_files(struct usb_device *udev)
struct device *dev = &udev->dev;
usb_remove_ep_files(&udev->ep0);
device_remove_file(dev, &dev_attr_manufacturer);
device_remove_file(dev, &dev_attr_product);
device_remove_file(dev, &dev_attr_serial);
remove_power_attributes(dev);
sysfs_remove_group(&dev->kobj, &dev_attr_grp);
if (udev->manufacturer)
device_remove_file(dev, &dev_attr_manufacturer);
if (udev->product)
device_remove_file(dev, &dev_attr_product);
if (udev->serial)
device_remove_file(dev, &dev_attr_serial);
}
/* Interface fields */
......@@ -362,33 +430,28 @@ static inline void usb_remove_intf_ep_files(struct usb_interface *intf)
int usb_create_sysfs_intf_files(struct usb_interface *intf)
{
struct device *dev = &intf->dev;
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_host_interface *alt = intf->cur_altsetting;
int retval;
retval = sysfs_create_group(&intf->dev.kobj, &intf_attr_grp);
retval = sysfs_create_group(&dev->kobj, &intf_attr_grp);
if (retval)
goto error;
return retval;
if (alt->string == NULL)
alt->string = usb_cache_string(udev, alt->desc.iInterface);
if (alt->string)
retval = device_create_file(&intf->dev, &dev_attr_interface);
retval = device_create_file(dev, &dev_attr_interface);
usb_create_intf_ep_files(intf, udev);
return 0;
error:
if (alt->string)
device_remove_file(&intf->dev, &dev_attr_interface);
sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp);
usb_remove_intf_ep_files(intf);
return retval;
}
void usb_remove_sysfs_intf_files(struct usb_interface *intf)
{
usb_remove_intf_ep_files(intf);
sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp);
struct device *dev = &intf->dev;
if (intf->cur_altsetting->string)
device_remove_file(&intf->dev, &dev_attr_interface);
usb_remove_intf_ep_files(intf);
device_remove_file(dev, &dev_attr_interface);
sysfs_remove_group(&dev->kobj, &intf_attr_grp);
}
......@@ -22,6 +22,7 @@
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/bitops.h>
#include <linux/slab.h>
......@@ -50,6 +51,16 @@ static int nousb; /* Disable USB when built into kernel image */
struct workqueue_struct *ksuspend_usb_wq; /* For autosuspend */
#ifdef CONFIG_USB_SUSPEND
static int usb_autosuspend_delay = 2; /* Default delay value,
* in seconds */
module_param_named(autosuspend, usb_autosuspend_delay, uint, 0644);
MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
#else
#define usb_autosuspend_delay 0
#endif
/**
* usb_ifnum_to_if - get the interface object with a given interface number
......@@ -306,6 +317,7 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
#ifdef CONFIG_PM
mutex_init(&dev->pm_mutex);
INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work);
dev->autosuspend_delay = usb_autosuspend_delay * HZ;
#endif
return dev;
}
......
......@@ -13,6 +13,7 @@ extern void usb_disable_interface (struct usb_device *dev,
struct usb_interface *intf);
extern void usb_release_interface_cache(struct kref *ref);
extern void usb_disable_device (struct usb_device *dev, int skip_ep0);
extern void usb_detect_quirks(struct usb_device *udev);
extern int usb_get_device_descriptor(struct usb_device *dev,
unsigned int size);
......@@ -21,6 +22,8 @@ extern int usb_set_configuration(struct usb_device *dev, int configuration);
extern void usb_kick_khubd(struct usb_device *dev);
extern void usb_resume_root_hub(struct usb_device *dev);
extern int usb_match_device(struct usb_device *dev,
const struct usb_device_id *id);
extern int usb_hub_init(void);
extern void usb_hub_cleanup(void);
......@@ -62,14 +65,14 @@ static inline void usb_pm_unlock(struct usb_device *udev) {}
#ifdef CONFIG_USB_SUSPEND
#define USB_AUTOSUSPEND_DELAY (HZ*2)
extern void usb_autosuspend_device(struct usb_device *udev);
extern void usb_try_autosuspend_device(struct usb_device *udev);
extern int usb_autoresume_device(struct usb_device *udev);
#else
#define usb_autosuspend_device(udev) do {} while (0)
#define usb_autosuspend_device(udev) do {} while (0)
#define usb_try_autosuspend_device(udev) do {} while (0)
static inline int usb_autoresume_device(struct usb_device *udev)
{
return 0;
......
......@@ -553,6 +553,7 @@ static ssize_t ep_aio_read_retry(struct kiocb *iocb)
{
struct kiocb_priv *priv = iocb->private;
ssize_t len, total;
void *to_copy;
int i;
/* we "retry" to get the right mm context for this: */
......@@ -560,10 +561,11 @@ static ssize_t ep_aio_read_retry(struct kiocb *iocb)
/* copy stuff into user buffers */
total = priv->actual;
len = 0;
to_copy = priv->buf;
for (i=0; i < priv->nr_segs; i++) {
ssize_t this = min((ssize_t)(priv->iv[i].iov_len), total);
if (copy_to_user(priv->iv[i].iov_base, priv->buf, this)) {
if (copy_to_user(priv->iv[i].iov_base, to_copy, this)) {
if (len == 0)
len = -EFAULT;
break;
......@@ -571,6 +573,7 @@ static ssize_t ep_aio_read_retry(struct kiocb *iocb)
total -= this;
len += this;
to_copy += this;
if (total == 0)
break;
}
......
......@@ -196,7 +196,7 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space)
struct uhci_td *td = list_entry(urbp->td_list.next,
struct uhci_td, list);
if (cpu_to_le32(td->dma_handle) != (element & ~UHCI_PTR_BITS))
if (element != LINK_TO_TD(td))
out += sprintf(out, "%*s Element != First TD\n",
space, "");
i = nurbs = 0;
......@@ -220,16 +220,6 @@ static int uhci_show_qh(struct uhci_qh *qh, char *buf, int len, int space)
return out - buf;
}
static const char * const qh_names[] = {
"skel_unlink_qh", "skel_iso_qh",
"skel_int128_qh", "skel_int64_qh",
"skel_int32_qh", "skel_int16_qh",
"skel_int8_qh", "skel_int4_qh",
"skel_int2_qh", "skel_int1_qh",
"skel_ls_control_qh", "skel_fs_control_qh",
"skel_bulk_qh", "skel_term_qh"
};
static int uhci_show_sc(int port, unsigned short status, char *buf, int len)
{
char *out = buf;
......@@ -352,6 +342,12 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
struct uhci_td *td;
struct list_head *tmp, *head;
int nframes, nerrs;
__le32 link;
static const char * const qh_names[] = {
"unlink", "iso", "int128", "int64", "int32", "int16",
"int8", "int4", "int2", "async", "term"
};
out += uhci_show_root_hub_state(uhci, out, len - (out - buf));
out += sprintf(out, "HC status\n");
......@@ -374,7 +370,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
nframes = 10;
nerrs = 0;
for (i = 0; i < UHCI_NUMFRAMES; ++i) {
__le32 link, qh_dma;
__le32 qh_dma;
j = 0;
td = uhci->frame_cpu[i];
......@@ -393,7 +389,7 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
do {
td = list_entry(tmp, struct uhci_td, fl_list);
tmp = tmp->next;
if (cpu_to_le32(td->dma_handle) != link) {
if (link != LINK_TO_TD(td)) {
if (nframes > 0)
out += sprintf(out, " link does "
"not match list entry!\n");
......@@ -430,23 +426,21 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
for (i = 0; i < UHCI_NUM_SKELQH; ++i) {
int cnt = 0;
__le32 fsbr_link = 0;
qh = uhci->skelqh[i];
out += sprintf(out, "- %s\n", qh_names[i]); \
out += sprintf(out, "- skel_%s_qh\n", qh_names[i]); \
out += uhci_show_qh(qh, out, len - (out - buf), 4);
/* Last QH is the Terminating QH, it's different */
if (i == UHCI_NUM_SKELQH - 1) {
if (qh->link != UHCI_PTR_TERM)
out += sprintf(out, " bandwidth reclamation on!\n");
if (qh_element(qh) != cpu_to_le32(uhci->term_td->dma_handle))
if (i == SKEL_TERM) {
if (qh_element(qh) != LINK_TO_TD(uhci->term_td))
out += sprintf(out, " skel_term_qh element is not set to term_td!\n");
if (link == LINK_TO_QH(uhci->skel_term_qh))
goto check_qh_link;
continue;
}
j = (i < 9) ? 9 : i+1; /* Next skeleton */
head = &qh->node;
tmp = head->next;
......@@ -456,15 +450,26 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
if (++cnt <= 10)
out += uhci_show_qh(qh, out,
len - (out - buf), 4);
if (!fsbr_link && qh->skel >= SKEL_FSBR)
fsbr_link = LINK_TO_QH(qh);
}
if ((cnt -= 10) > 0)
out += sprintf(out, " Skipped %d QHs\n", cnt);
if (i > 1 && i < UHCI_NUM_SKELQH - 1) {
if (qh->link !=
(cpu_to_le32(uhci->skelqh[j]->dma_handle) | UHCI_PTR_QH))
out += sprintf(out, " last QH not linked to next skeleton!\n");
}
link = UHCI_PTR_TERM;
if (i <= SKEL_ISO)
;
else if (i < SKEL_ASYNC)
link = LINK_TO_QH(uhci->skel_async_qh);
else if (!uhci->fsbr_is_on)
;
else if (fsbr_link)
link = fsbr_link;
else
link = LINK_TO_QH(uhci->skel_term_qh);
check_qh_link:
if (qh->link != link)
out += sprintf(out, " last QH not linked to next skeleton!\n");
}
return out - buf;
......
......@@ -13,7 +13,7 @@
* (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
* support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
* (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
* (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu
* (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
*
* Intel documents this fairly well, and as far as I know there
* are no royalties or anything like that, but even so there are
......@@ -107,16 +107,16 @@ static __le32 uhci_frame_skel_link(struct uhci_hcd *uhci, int frame)
* interrupt QHs, which will help spread out bandwidth utilization.
*
* ffs (Find First bit Set) does exactly what we need:
* 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[8],
* 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[7], etc.
* 1,3,5,... => ffs = 0 => use period-2 QH = skelqh[8],
* 2,6,10,... => ffs = 1 => use period-4 QH = skelqh[7], etc.
* ffs >= 7 => not on any high-period queue, so use
* skel_int1_qh = skelqh[9].
* period-1 QH = skelqh[9].
* Add in UHCI_NUMFRAMES to insure at least one bit is set.
*/
skelnum = 8 - (int) __ffs(frame | UHCI_NUMFRAMES);
if (skelnum <= 1)
skelnum = 9;
return UHCI_PTR_QH | cpu_to_le32(uhci->skelqh[skelnum]->dma_handle);
return LINK_TO_QH(uhci->skelqh[skelnum]);
}
#include "uhci-debug.c"
......@@ -540,16 +540,18 @@ static void uhci_shutdown(struct pci_dev *pdev)
*
* The hardware doesn't really know any difference
* in the queues, but the order does matter for the
* protocols higher up. The order is:
* protocols higher up. The order in which the queues
* are encountered by the hardware is:
*
* - any isochronous events handled before any
* - All isochronous events are handled before any
* of the queues. We don't do that here, because
* we'll create the actual TD entries on demand.
* - The first queue is the interrupt queue.
* - The second queue is the control queue, split into low- and full-speed
* - The third queue is bulk queue.
* - The fourth queue is the bandwidth reclamation queue, which loops back
* to the full-speed control queue.
* - The first queue is the high-period interrupt queue.
* - The second queue is the period-1 interrupt and async
* (low-speed control, full-speed control, then bulk) queue.
* - The third queue is the terminating bandwidth reclamation queue,
* which contains no members, loops back to itself, and is present
* only when FSBR is on and there are no full-speed control or bulk QHs.
*/
static int uhci_start(struct usb_hcd *hcd)
{
......@@ -626,34 +628,18 @@ static int uhci_start(struct usb_hcd *hcd)
}
/*
* 8 Interrupt queues; link all higher int queues to int1,
* then link int1 to control and control to bulk
* 8 Interrupt queues; link all higher int queues to int1 = async
*/
uhci->skel_int128_qh->link =
uhci->skel_int64_qh->link =
uhci->skel_int32_qh->link =
uhci->skel_int16_qh->link =
uhci->skel_int8_qh->link =
uhci->skel_int4_qh->link =
uhci->skel_int2_qh->link = UHCI_PTR_QH |
cpu_to_le32(uhci->skel_int1_qh->dma_handle);
uhci->skel_int1_qh->link = UHCI_PTR_QH |
cpu_to_le32(uhci->skel_ls_control_qh->dma_handle);
uhci->skel_ls_control_qh->link = UHCI_PTR_QH |
cpu_to_le32(uhci->skel_fs_control_qh->dma_handle);
uhci->skel_fs_control_qh->link = UHCI_PTR_QH |
cpu_to_le32(uhci->skel_bulk_qh->dma_handle);
uhci->skel_bulk_qh->link = UHCI_PTR_QH |
cpu_to_le32(uhci->skel_term_qh->dma_handle);
for (i = SKEL_ISO + 1; i < SKEL_ASYNC; ++i)
uhci->skelqh[i]->link = LINK_TO_QH(uhci->skel_async_qh);
uhci->skel_async_qh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM;
/* This dummy TD is to work around a bug in Intel PIIX controllers */
uhci_fill_td(uhci->term_td, 0, uhci_explen(0) |
(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
uhci->term_td->link = cpu_to_le32(uhci->term_td->dma_handle);
uhci->skel_term_qh->link = UHCI_PTR_TERM;
uhci->skel_term_qh->element = cpu_to_le32(uhci->term_td->dma_handle);
(0x7f << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_IN, 0);
uhci->term_td->link = UHCI_PTR_TERM;
uhci->skel_async_qh->element = uhci->skel_term_qh->element =
LINK_TO_TD(uhci->term_td);
/*
* Fill the frame list: make all entries point to the proper
......
......@@ -129,11 +129,12 @@ struct uhci_qh {
__le32 element; /* Queue element (TD) pointer */
/* Software fields */
dma_addr_t dma_handle;
struct list_head node; /* Node in the list of QHs */
struct usb_host_endpoint *hep; /* Endpoint information */
struct usb_device *udev;
struct list_head queue; /* Queue of urbps for this QH */
struct uhci_qh *skel; /* Skeleton for this QH */
struct uhci_td *dummy_td; /* Dummy TD to end the queue */
struct uhci_td *post_td; /* Last TD completed */
......@@ -149,8 +150,7 @@ struct uhci_qh {
int state; /* QH_STATE_xxx; see above */
int type; /* Queue type (control, bulk, etc) */
dma_addr_t dma_handle;
int skel; /* Skeleton queue number */
unsigned int initial_toggle:1; /* Endpoint's current toggle value */
unsigned int needs_fixup:1; /* Must fix the TD toggle values */
......@@ -171,6 +171,8 @@ static inline __le32 qh_element(struct uhci_qh *qh) {
return element;
}
#define LINK_TO_QH(qh) (UHCI_PTR_QH | cpu_to_le32((qh)->dma_handle))
/*
* Transfer Descriptors
......@@ -264,6 +266,8 @@ static inline u32 td_status(struct uhci_td *td) {
return le32_to_cpu(status);
}
#define LINK_TO_TD(td) (cpu_to_le32((td)->dma_handle))
/*
* Skeleton Queue Headers
......@@ -272,12 +276,13 @@ static inline u32 td_status(struct uhci_td *td) {
/*
* The UHCI driver uses QHs with Interrupt, Control and Bulk URBs for
* automatic queuing. To make it easy to insert entries into the schedule,
* we have a skeleton of QHs for each predefined Interrupt latency,
* low-speed control, full-speed control, bulk, and terminating QH
* (see explanation for the terminating QH below).
* we have a skeleton of QHs for each predefined Interrupt latency.
* Asynchronous QHs (low-speed control, full-speed control, and bulk)
* go onto the period-1 interrupt list, since they all get accessed on
* every frame.
*
* When we want to add a new QH, we add it to the end of the list for the
* skeleton QH. For instance, the schedule list can look like this:
* When we want to add a new QH, we add it to the list starting from the
* appropriate skeleton QH. For instance, the schedule can look like this:
*
* skel int128 QH
* dev 1 interrupt QH
......@@ -285,50 +290,47 @@ static inline u32 td_status(struct uhci_td *td) {
* skel int64 QH
* skel int32 QH
* ...
* skel int1 QH
* skel low-speed control QH
* dev 5 control QH
* skel full-speed control QH
* skel bulk QH
* skel int1 + async QH
* dev 5 low-speed control QH
* dev 1 bulk QH
* dev 2 bulk QH
* skel terminating QH
*
* The terminating QH is used for 2 reasons:
* - To place a terminating TD which is used to workaround a PIIX bug
* (see Intel errata for explanation), and
* - To loop back to the full-speed control queue for full-speed bandwidth
* reclamation.
* There is a special terminating QH used to keep full-speed bandwidth
* reclamation active when no full-speed control or bulk QHs are linked
* into the schedule. It has an inactive TD (to work around a PIIX bug,
* see the Intel errata) and it points back to itself.
*
* There's a special skeleton QH for Isochronous QHs. It never appears
* on the schedule, and Isochronous TDs go on the schedule before the
* There's a special skeleton QH for Isochronous QHs which never appears
* on the schedule. Isochronous TDs go on the schedule before the
* the skeleton QHs. The hardware accesses them directly rather than
* through their QH, which is used only for bookkeeping purposes.
* While the UHCI spec doesn't forbid the use of QHs for Isochronous,
* it doesn't use them either. And the spec says that queues never
* advance on an error completion status, which makes them totally
* unsuitable for Isochronous transfers.
*
* There's also a special skeleton QH used for QHs which are in the process
* of unlinking and so may still be in use by the hardware. It too never
* appears on the schedule.
*/
#define UHCI_NUM_SKELQH 14
#define skel_unlink_qh skelqh[0]
#define skel_iso_qh skelqh[1]
#define skel_int128_qh skelqh[2]
#define skel_int64_qh skelqh[3]
#define skel_int32_qh skelqh[4]
#define skel_int16_qh skelqh[5]
#define skel_int8_qh skelqh[6]
#define skel_int4_qh skelqh[7]
#define skel_int2_qh skelqh[8]
#define skel_int1_qh skelqh[9]
#define skel_ls_control_qh skelqh[10]
#define skel_fs_control_qh skelqh[11]
#define skel_bulk_qh skelqh[12]
#define skel_term_qh skelqh[13]
/* Find the skelqh entry corresponding to an interval exponent */
#define UHCI_SKEL_INDEX(exponent) (9 - exponent)
#define UHCI_NUM_SKELQH 11
#define SKEL_UNLINK 0
#define skel_unlink_qh skelqh[SKEL_UNLINK]
#define SKEL_ISO 1
#define skel_iso_qh skelqh[SKEL_ISO]
/* int128, int64, ..., int1 = 2, 3, ..., 9 */
#define SKEL_INDEX(exponent) (9 - exponent)
#define SKEL_ASYNC 9
#define skel_async_qh skelqh[SKEL_ASYNC]
#define SKEL_TERM 10
#define skel_term_qh skelqh[SKEL_TERM]
/* The following entries refer to sublists of skel_async_qh */
#define SKEL_LS_CONTROL 20
#define SKEL_FS_CONTROL 21
#define SKEL_FSBR SKEL_FS_CONTROL
#define SKEL_BULK 22
/*
* The UHCI controller and root hub
......
......@@ -13,7 +13,7 @@
* (C) Copyright 2000 Yggdrasil Computing, Inc. (port of new PCI interface
* support from usb-ohci.c by Adam Richter, adam@yggdrasil.com).
* (C) Copyright 1999 Gregory P. Smith (from usb-ohci.c)
* (C) Copyright 2004-2006 Alan Stern, stern@rowland.harvard.edu
* (C) Copyright 2004-2007 Alan Stern, stern@rowland.harvard.edu
*/
......@@ -45,15 +45,43 @@ static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci)
*/
static void uhci_fsbr_on(struct uhci_hcd *uhci)
{
struct uhci_qh *fsbr_qh, *lqh, *tqh;
uhci->fsbr_is_on = 1;
uhci->skel_term_qh->link = cpu_to_le32(
uhci->skel_fs_control_qh->dma_handle) | UHCI_PTR_QH;
lqh = list_entry(uhci->skel_async_qh->node.prev,
struct uhci_qh, node);
/* Find the first FSBR QH. Linear search through the list is
* acceptable because normally FSBR gets turned on as soon as
* one QH needs it. */
fsbr_qh = NULL;
list_for_each_entry_reverse(tqh, &uhci->skel_async_qh->node, node) {
if (tqh->skel < SKEL_FSBR)
break;
fsbr_qh = tqh;
}
/* No FSBR QH means we must insert the terminating skeleton QH */
if (!fsbr_qh) {
uhci->skel_term_qh->link = LINK_TO_QH(uhci->skel_term_qh);
wmb();
lqh->link = uhci->skel_term_qh->link;
/* Otherwise loop the last QH to the first FSBR QH */
} else
lqh->link = LINK_TO_QH(fsbr_qh);
}
static void uhci_fsbr_off(struct uhci_hcd *uhci)
{
struct uhci_qh *lqh;
uhci->fsbr_is_on = 0;
uhci->skel_term_qh->link = UHCI_PTR_TERM;
lqh = list_entry(uhci->skel_async_qh->node.prev,
struct uhci_qh, node);
/* End the async list normally and unlink the terminating QH */
lqh->link = uhci->skel_term_qh->link = UHCI_PTR_TERM;
}
static void uhci_add_fsbr(struct uhci_hcd *uhci, struct urb *urb)
......@@ -158,11 +186,11 @@ static inline void uhci_insert_td_in_frame_list(struct uhci_hcd *uhci,
td->link = ltd->link;
wmb();
ltd->link = cpu_to_le32(td->dma_handle);
ltd->link = LINK_TO_TD(td);
} else {
td->link = uhci->frame[framenum];
wmb();
uhci->frame[framenum] = cpu_to_le32(td->dma_handle);
uhci->frame[framenum] = LINK_TO_TD(td);
uhci->frame_cpu[framenum] = td;
}
}
......@@ -184,7 +212,7 @@ static inline void uhci_remove_td_from_frame_list(struct uhci_hcd *uhci,
struct uhci_td *ntd;
ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list);
uhci->frame[td->frame] = cpu_to_le32(ntd->dma_handle);
uhci->frame[td->frame] = LINK_TO_TD(ntd);
uhci->frame_cpu[td->frame] = ntd;
}
} else {
......@@ -405,12 +433,81 @@ static void uhci_fixup_toggles(struct uhci_qh *qh, int skip_first)
}
/*
* Put a QH on the schedule in both hardware and software
* Link an Isochronous QH into its skeleton's list
*/
static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
static inline void link_iso(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
list_add_tail(&qh->node, &uhci->skel_iso_qh->node);
/* Isochronous QHs aren't linked by the hardware */
}
/*
* Link a high-period interrupt QH into the schedule at the end of its
* skeleton's list
*/
static void link_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
struct uhci_qh *pqh;
list_add_tail(&qh->node, &uhci->skelqh[qh->skel]->node);
pqh = list_entry(qh->node.prev, struct uhci_qh, node);
qh->link = pqh->link;
wmb();
pqh->link = LINK_TO_QH(qh);
}
/*
* Link a period-1 interrupt or async QH into the schedule at the
* correct spot in the async skeleton's list, and update the FSBR link
*/
static void link_async(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
struct uhci_qh *pqh, *lqh;
__le32 link_to_new_qh;
__le32 *extra_link = &link_to_new_qh;
/* Find the predecessor QH for our new one and insert it in the list.
* The list of QHs is expected to be short, so linear search won't
* take too long. */
list_for_each_entry_reverse(pqh, &uhci->skel_async_qh->node, node) {
if (pqh->skel <= qh->skel)
break;
}
list_add(&qh->node, &pqh->node);
qh->link = pqh->link;
link_to_new_qh = LINK_TO_QH(qh);
/* If this is now the first FSBR QH, take special action */
if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR &&
qh->skel >= SKEL_FSBR) {
lqh = list_entry(uhci->skel_async_qh->node.prev,
struct uhci_qh, node);
/* If the new QH is also the last one, we must unlink
* the terminating skeleton QH and make the new QH point
* back to itself. */
if (qh == lqh) {
qh->link = link_to_new_qh;
extra_link = &uhci->skel_term_qh->link;
/* Otherwise the last QH must point to the new QH */
} else
extra_link = &lqh->link;
}
/* Link it into the schedule */
wmb();
*extra_link = pqh->link = link_to_new_qh;
}
/*
* Put a QH on the schedule in both hardware and software
*/
static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
WARN_ON(list_empty(&qh->queue));
/* Set the element pointer if it isn't set already.
......@@ -421,7 +518,7 @@ static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
struct uhci_td *td = list_entry(urbp->td_list.next,
struct uhci_td, list);
qh->element = cpu_to_le32(td->dma_handle);
qh->element = LINK_TO_TD(td);
}
/* Treat the queue as if it has just advanced */
......@@ -432,18 +529,64 @@ static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
return;
qh->state = QH_STATE_ACTIVE;
/* Move the QH from its old list to the end of the appropriate
/* Move the QH from its old list to the correct spot in the appropriate
* skeleton's list */
if (qh == uhci->next_qh)
uhci->next_qh = list_entry(qh->node.next, struct uhci_qh,
node);
list_move_tail(&qh->node, &qh->skel->node);
list_del(&qh->node);
if (qh->skel == SKEL_ISO)
link_iso(uhci, qh);
else if (qh->skel < SKEL_ASYNC)
link_interrupt(uhci, qh);
else
link_async(uhci, qh);
}
/*
* Unlink a high-period interrupt QH from the schedule
*/
static void unlink_interrupt(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
struct uhci_qh *pqh;
/* Link it into the schedule */
pqh = list_entry(qh->node.prev, struct uhci_qh, node);
qh->link = pqh->link;
wmb();
pqh->link = UHCI_PTR_QH | cpu_to_le32(qh->dma_handle);
pqh->link = qh->link;
mb();
}
/*
* Unlink a period-1 interrupt or async QH from the schedule
*/
static void unlink_async(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
struct uhci_qh *pqh, *lqh;
__le32 link_to_next_qh = qh->link;
pqh = list_entry(qh->node.prev, struct uhci_qh, node);
/* If this is the first FSBQ QH, take special action */
if (uhci->fsbr_is_on && pqh->skel < SKEL_FSBR &&
qh->skel >= SKEL_FSBR) {
lqh = list_entry(uhci->skel_async_qh->node.prev,
struct uhci_qh, node);
/* If this QH is also the last one, we must link in
* the terminating skeleton QH. */
if (qh == lqh) {
link_to_next_qh = LINK_TO_QH(uhci->skel_term_qh);
uhci->skel_term_qh->link = link_to_next_qh;
wmb();
qh->link = link_to_next_qh;
/* Otherwise the last QH must point to the new first FSBR QH */
} else
lqh->link = link_to_next_qh;
}
pqh->link = link_to_next_qh;
mb();
}
/*
......@@ -451,17 +594,18 @@ static void uhci_activate_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
*/
static void uhci_unlink_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
struct uhci_qh *pqh;
if (qh->state == QH_STATE_UNLINKING)
return;
WARN_ON(qh->state != QH_STATE_ACTIVE || !qh->udev);
qh->state = QH_STATE_UNLINKING;
/* Unlink the QH from the schedule and record when we did it */
pqh = list_entry(qh->node.prev, struct uhci_qh, node);
pqh->link = qh->link;
mb();
if (qh->skel == SKEL_ISO)
;
else if (qh->skel < SKEL_ASYNC)
unlink_interrupt(uhci, qh);
else
unlink_async(uhci, qh);
uhci_get_current_frame_number(uhci);
qh->unlink_frame = uhci->frame_number;
......@@ -697,6 +841,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
dma_addr_t data = urb->transfer_dma;
__le32 *plink;
struct urb_priv *urbp = urb->hcpriv;
int skel;
/* The "pipe" thing contains the destination in bits 8--18 */
destination = (urb->pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP;
......@@ -737,7 +882,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
td = uhci_alloc_td(uhci);
if (!td)
goto nomem;
*plink = cpu_to_le32(td->dma_handle);
*plink = LINK_TO_TD(td);
/* Alternate Data0/1 (start with Data1) */
destination ^= TD_TOKEN_TOGGLE;
......@@ -757,7 +902,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
td = uhci_alloc_td(uhci);
if (!td)
goto nomem;
*plink = cpu_to_le32(td->dma_handle);
*plink = LINK_TO_TD(td);
/*
* It's IN if the pipe is an output pipe or we're not expecting
......@@ -784,7 +929,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
td = uhci_alloc_td(uhci);
if (!td)
goto nomem;
*plink = cpu_to_le32(td->dma_handle);
*plink = LINK_TO_TD(td);
uhci_fill_td(td, 0, USB_PID_OUT | uhci_explen(0), 0);
wmb();
......@@ -797,11 +942,13 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
* isn't in the CONFIGURED state. */
if (urb->dev->speed == USB_SPEED_LOW ||
urb->dev->state != USB_STATE_CONFIGURED)
qh->skel = uhci->skel_ls_control_qh;
skel = SKEL_LS_CONTROL;
else {
qh->skel = uhci->skel_fs_control_qh;
skel = SKEL_FS_CONTROL;
uhci_add_fsbr(uhci, urb);
}
if (qh->state != QH_STATE_ACTIVE)
qh->skel = skel;
urb->actual_length = -8; /* Account for the SETUP packet */
return 0;
......@@ -860,7 +1007,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
td = uhci_alloc_td(uhci);
if (!td)
goto nomem;
*plink = cpu_to_le32(td->dma_handle);
*plink = LINK_TO_TD(td);
}
uhci_add_td_to_urbp(td, urbp);
uhci_fill_td(td, status,
......@@ -888,7 +1035,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
td = uhci_alloc_td(uhci);
if (!td)
goto nomem;
*plink = cpu_to_le32(td->dma_handle);
*plink = LINK_TO_TD(td);
uhci_add_td_to_urbp(td, urbp);
uhci_fill_td(td, status,
......@@ -914,7 +1061,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
td = uhci_alloc_td(uhci);
if (!td)
goto nomem;
*plink = cpu_to_le32(td->dma_handle);
*plink = LINK_TO_TD(td);
uhci_fill_td(td, 0, USB_PID_OUT | uhci_explen(0), 0);
wmb();
......@@ -931,7 +1078,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
return -ENOMEM;
}
static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb,
static int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb,
struct uhci_qh *qh)
{
int ret;
......@@ -940,7 +1087,8 @@ static inline int uhci_submit_bulk(struct uhci_hcd *uhci, struct urb *urb,
if (urb->dev->speed == USB_SPEED_LOW)
return -EINVAL;
qh->skel = uhci->skel_bulk_qh;
if (qh->state != QH_STATE_ACTIVE)
qh->skel = SKEL_BULK;
ret = uhci_submit_common(uhci, urb, qh);
if (ret == 0)
uhci_add_fsbr(uhci, urb);
......@@ -968,7 +1116,7 @@ static int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb,
if (exponent < 0)
return -EINVAL;
qh->period = 1 << exponent;
qh->skel = uhci->skelqh[UHCI_SKEL_INDEX(exponent)];
qh->skel = SKEL_INDEX(exponent);
/* For now, interrupt phase is fixed by the layout
* of the QH lists. */
......@@ -1005,7 +1153,7 @@ static int uhci_fixup_short_transfer(struct uhci_hcd *uhci,
* the queue at the status stage transaction, which is
* the last TD. */
WARN_ON(list_empty(&urbp->td_list));
qh->element = cpu_to_le32(td->dma_handle);
qh->element = LINK_TO_TD(td);
tmp = td->list.prev;
ret = -EINPROGRESS;
......@@ -1216,7 +1364,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
qh->iso_status = 0;
}
qh->skel = uhci->skel_iso_qh;
qh->skel = SKEL_ISO;
if (!qh->bandwidth_reserved)
uhci_reserve_bandwidth(uhci, qh);
return 0;
......@@ -1566,8 +1714,7 @@ static int uhci_advance_check(struct uhci_hcd *uhci, struct uhci_qh *qh)
if (time_after(jiffies, qh->advance_jiffies + QH_WAIT_TIMEOUT)) {
/* Detect the Intel bug and work around it */
if (qh->post_td && qh_element(qh) ==
cpu_to_le32(qh->post_td->dma_handle)) {
if (qh->post_td && qh_element(qh) == LINK_TO_TD(qh->post_td)) {
qh->element = qh->post_td->link;
qh->advance_jiffies = jiffies;
ret = 1;
......
......@@ -31,6 +31,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb/input.h>
#include <linux/hid.h>
/*
* Version Information
......@@ -330,7 +331,8 @@ static void usb_kbd_disconnect(struct usb_interface *intf)
}
static struct usb_device_id usb_kbd_id_table [] = {
{ USB_INTERFACE_INFO(3, 1, 1) },
{ USB_INTERFACE_INFO(USB_INTERFACE_CLASS_HID, USB_INTERFACE_SUBCLASS_BOOT,
USB_INTERFACE_PROTOCOL_KEYBOARD) },
{ } /* Terminating entry */
};
......
......@@ -31,6 +31,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb/input.h>
#include <linux/hid.h>
/*
* Version Information
......@@ -213,7 +214,8 @@ static void usb_mouse_disconnect(struct usb_interface *intf)
}
static struct usb_device_id usb_mouse_id_table [] = {
{ USB_INTERFACE_INFO(3, 1, 2) },
{ USB_INTERFACE_INFO(USB_INTERFACE_CLASS_HID, USB_INTERFACE_SUBCLASS_BOOT,
USB_INTERFACE_PROTOCOL_MOUSE) },
{ } /* Terminating entry */
};
......
......@@ -163,7 +163,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
}
id = STYLUS_DEVICE_ID;
if (data[1] & 0x10) { /* in prox */
if (data[1] & 0x80) { /* in prox */
switch ((data[1] >> 5) & 3) {
......@@ -196,9 +196,6 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
break;
}
}
if (data[1] & 0x90) {
x = wacom_le16_to_cpu(&data[2]);
y = wacom_le16_to_cpu(&data[4]);
wacom_report_abs(wcombo, ABS_X, x);
......@@ -210,19 +207,28 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
}
wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
}
else
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
if (data[1] & 0x10) /* only report prox-in when in area */
wacom_report_key(wcombo, wacom->tool[0], 1);
if (!(data[1] & 0x90)) /* report prox-out when physically out */
} else if (!(data[1] & 0x90)) {
wacom_report_abs(wcombo, ABS_X, 0);
wacom_report_abs(wcombo, ABS_Y, 0);
if (wacom->tool[0] == BTN_TOOL_MOUSE) {
wacom_report_key(wcombo, BTN_LEFT, 0);
wacom_report_key(wcombo, BTN_RIGHT, 0);
wacom_report_abs(wcombo, ABS_DISTANCE, 0);
} else {
wacom_report_abs(wcombo, ABS_PRESSURE, 0);
wacom_report_key(wcombo, BTN_TOUCH, 0);
wacom_report_key(wcombo, BTN_STYLUS, 0);
wacom_report_key(wcombo, BTN_STYLUS2, 0);
}
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
wacom_report_key(wcombo, wacom->tool[0], 0);
wacom_input_sync(wcombo);
}
/* send pad data */
if (wacom->features->type == WACOM_G4) {
if ( (wacom->serial[1] & 0xc0) != (data[7] & 0xf8) ) {
if (data[7] & 0xf8) {
wacom_input_sync(wcombo); /* sync last event */
wacom->id[1] = 1;
wacom->serial[1] = (data[7] & 0xf8);
wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
......@@ -230,10 +236,15 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
wacom_report_rel(wcombo, REL_WHEEL, rw);
wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
} else if (wacom->id[1]) {
wacom_input_sync(wcombo); /* sync last event */
wacom->id[1] = 0;
wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
wacom_report_abs(wcombo, ABS_MISC, 0);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
}
}
......@@ -304,28 +315,35 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
default: /* Unknown tool */
wacom->tool[idx] = BTN_TOOL_PEN;
}
/* only large I3 support Lens Cursor */
if(!((wacom->tool[idx] == BTN_TOOL_LENS)
&& ((wacom->features->type == INTUOS3)
|| (wacom->features->type == INTUOS3S)))) {
wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */
wacom_report_key(wcombo, wacom->tool[idx], 1);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
return 2;
}
return 1;
}
/* Exit report */
if ((data[1] & 0xfe) == 0x80) {
if(!((wacom->tool[idx] == BTN_TOOL_LENS)
&& ((wacom->features->type == INTUOS3)
|| (wacom->features->type == INTUOS3S)))) {
wacom_report_key(wcombo, wacom->tool[idx], 0);
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
return 2;
wacom_report_abs(wcombo, ABS_X, 0);
wacom_report_abs(wcombo, ABS_Y, 0);
wacom_report_abs(wcombo, ABS_DISTANCE, 0);
if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
wacom_report_key(wcombo, BTN_LEFT, 0);
wacom_report_key(wcombo, BTN_MIDDLE, 0);
wacom_report_key(wcombo, BTN_RIGHT, 0);
wacom_report_key(wcombo, BTN_SIDE, 0);
wacom_report_key(wcombo, BTN_EXTRA, 0);
wacom_report_abs(wcombo, ABS_THROTTLE, 0);
wacom_report_abs(wcombo, ABS_RZ, 0);
} else {
wacom_report_abs(wcombo, ABS_PRESSURE, 0);
wacom_report_abs(wcombo, ABS_TILT_X, 0);
wacom_report_abs(wcombo, ABS_TILT_Y, 0);
wacom_report_key(wcombo, BTN_STYLUS, 0);
wacom_report_key(wcombo, BTN_STYLUS2, 0);
wacom_report_key(wcombo, BTN_TOUCH, 0);
wacom_report_abs(wcombo, ABS_WHEEL, 0);
}
wacom_report_key(wcombo, wacom->tool[idx], 0);
wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
return 2;
}
return 0;
}
......@@ -394,6 +412,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
wacom_report_key(wcombo, wacom->tool[1], 1);
else
wacom_report_key(wcombo, wacom->tool[1], 0);
wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff);
return 1;
}
......@@ -403,6 +422,12 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
if (result)
return result-1;
/* Only large I3 and I1 & I2 support Lense Cursor */
if((wacom->tool[idx] == BTN_TOOL_LENS)
&& ((wacom->features->type == INTUOS3)
|| (wacom->features->type == INTUOS3S)))
return 0;
/* Cintiq doesn't send data when RDY bit isn't set */
if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
return 0;
......@@ -554,11 +579,11 @@ static struct wacom_features wacom_features[] = {
{ "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE },
{ "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 63, INTUOS },
{ "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 63, INTUOS },
{ "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 63, INTUOS },
{ "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 63, INTUOS },
{ "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 63, INTUOS },
{ "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 31, INTUOS },
{ "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 31, INTUOS },
{ "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 31, INTUOS },
{ "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 31, INTUOS },
{ "Wacom PL400", 8, 5408, 4056, 255, 0, PL },
{ "Wacom PL500", 8, 6144, 4608, 255, 0, PL },
{ "Wacom PL600", 8, 6126, 4604, 255, 0, PL },
......@@ -571,11 +596,11 @@ static struct wacom_features wacom_features[] = {
{ "Wacom DTF521", 8, 6282, 4762, 511, 0, PL },
{ "Wacom DTF720", 8, 6858, 5506, 511, 0, PL },
{ "Wacom Cintiq Partner",8, 20480, 15360, 511, 0, PTU },
{ "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 63, INTUOS },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 63, INTUOS },
{ "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 63, INTUOS },
{ "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 63, INTUOS },
{ "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 63, INTUOS },
{ "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 31, INTUOS },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 31, INTUOS },
{ "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 31, INTUOS },
{ "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 31, INTUOS },
{ "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 63, INTUOS3S },
{ "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 63, INTUOS3 },
{ "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 63, INTUOS3 },
......@@ -584,7 +609,7 @@ static struct wacom_features wacom_features[] = {
{ "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 63, INTUOS3 },
{ "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 63, INTUOS3S },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 63, INTUOS },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ }
};
......
......@@ -12,6 +12,7 @@
#define STYLUS_DEVICE_ID 0x02
#define CURSOR_DEVICE_ID 0x06
#define ERASER_DEVICE_ID 0x0A
#define PAD_DEVICE_ID 0x0F
enum {
PENPARTNER = 0,
......
......@@ -244,6 +244,20 @@ config USB_TRANCEVIBRATOR
To compile this driver as a module, choose M here: the
module will be called trancevibrator.
config USB_IOWARRIOR
tristate "IO Warrior driver support"
depends on USB
help
Say Y here if you want to support the IO Warrior devices from Code
Mercenaries. This includes support for the following devices:
IO Warrior 40
IO Warrior 24
IO Warrior 56
IO Warrior 24 Power Vampire
To compile this driver as a module, choose M here: the
module will be called iowarrior.
config USB_TEST
tristate "USB testing driver (DEVELOPMENT)"
depends on USB && USB_DEVICEFS && EXPERIMENTAL
......
......@@ -13,6 +13,7 @@ obj-$(CONFIG_USB_EMI26) += emi26.o
obj-$(CONFIG_USB_EMI62) += emi62.o
obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o
obj-$(CONFIG_USB_IDMOUSE) += idmouse.o
obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o
obj-$(CONFIG_USB_LCD) += usblcd.o
obj-$(CONFIG_USB_LD) += ldusb.o
obj-$(CONFIG_USB_LED) += usbled.o
......
/*
* Native support for the I/O-Warrior USB devices
*
* Copyright (c) 2003-2005 Code Mercenaries GmbH
* written by Christian Lucht <lucht@codemercs.com>
*
* based on
* usb-skeleton.c by Greg Kroah-Hartman <greg@kroah.com>
* brlvger.c by Stephane Dalton <sdalton@videotron.ca>
* and St�hane Doyon <s.doyon@videotron.ca>
*
* Released under the GPLv2.
*/
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/poll.h>
#include <linux/version.h>
#include <linux/usb/iowarrior.h>
/* Version Information */
#define DRIVER_VERSION "v0.4.0"
#define DRIVER_AUTHOR "Christian Lucht <lucht@codemercs.com>"
#define DRIVER_DESC "USB IO-Warrior driver (Linux 2.6.x)"
#define USB_VENDOR_ID_CODEMERCS 1984
/* low speed iowarrior */
#define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500
#define USB_DEVICE_ID_CODEMERCS_IOW24 0x1501
#define USB_DEVICE_ID_CODEMERCS_IOWPV1 0x1511
#define USB_DEVICE_ID_CODEMERCS_IOWPV2 0x1512
/* full speed iowarrior */
#define USB_DEVICE_ID_CODEMERCS_IOW56 0x1503
/* Get a minor range for your devices from the usb maintainer */
#ifdef CONFIG_USB_DYNAMIC_MINORS
#define IOWARRIOR_MINOR_BASE 0
#else
#define IOWARRIOR_MINOR_BASE 208 // SKELETON_MINOR_BASE 192 + 16, not offical yet
#endif
/* interrupt input queue size */
#define MAX_INTERRUPT_BUFFER 16
/*
maximum number of urbs that are submitted for writes at the same time,
this applies to the IOWarrior56 only!
IOWarrior24 and IOWarrior40 use synchronous usb_control_msg calls.
*/
#define MAX_WRITES_IN_FLIGHT 4
/* Use our own dbg macro */
#undef dbg
#define dbg( format, arg... ) do { if( debug ) printk( KERN_DEBUG __FILE__ ": " format "\n" , ## arg ); } while ( 0 )
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/* Module parameters */
static int debug = 0;
module_param(debug, bool, 0644);
MODULE_PARM_DESC(debug, "debug=1 enables debugging messages");
static struct usb_driver iowarrior_driver;
/*--------------*/
/* data */
/*--------------*/
/* Structure to hold all of our device specific stuff */
struct iowarrior {
struct mutex mutex; /* locks this structure */
struct usb_device *udev; /* save off the usb device pointer */
struct usb_interface *interface; /* the interface for this device */
unsigned char minor; /* the starting minor number for this device */
struct usb_endpoint_descriptor *int_out_endpoint; /* endpoint for reading (needed for IOW56 only) */
struct usb_endpoint_descriptor *int_in_endpoint; /* endpoint for reading */
struct urb *int_in_urb; /* the urb for reading data */
unsigned char *int_in_buffer; /* buffer for data to be read */
unsigned char serial_number; /* to detect lost packages */
unsigned char *read_queue; /* size is MAX_INTERRUPT_BUFFER * packet size */
wait_queue_head_t read_wait;
wait_queue_head_t write_wait; /* wait-queue for writing to the device */
atomic_t write_busy; /* number of write-urbs submitted */
atomic_t read_idx;
atomic_t intr_idx;
spinlock_t intr_idx_lock; /* protects intr_idx */
atomic_t overflow_flag; /* signals an index 'rollover' */
int present; /* this is 1 as long as the device is connected */
int opened; /* this is 1 if the device is currently open */
char chip_serial[9]; /* the serial number string of the chip connected */
int report_size; /* number of bytes in a report */
u16 product_id;
};
/*--------------*/
/* globals */
/*--------------*/
/* prevent races between open() and disconnect() */
static DECLARE_MUTEX(disconnect_sem);
/*
* USB spec identifies 5 second timeouts.
*/
#define GET_TIMEOUT 5
#define USB_REQ_GET_REPORT 0x01
//#if 0
static int usb_get_report(struct usb_device *dev,
struct usb_host_interface *inter, unsigned char type,
unsigned char id, void *buf, int size)
{
return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_REPORT,
USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, (type << 8) + id,
inter->desc.bInterfaceNumber, buf, size,
GET_TIMEOUT);
}
//#endif
#define USB_REQ_SET_REPORT 0x09
static int usb_set_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
{
return usb_control_msg(interface_to_usbdev(intf),
usb_sndctrlpipe(interface_to_usbdev(intf), 0),
USB_REQ_SET_REPORT,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
(type << 8) + id,
intf->cur_altsetting->desc.bInterfaceNumber, buf,
size, 1);
}
/*---------------------*/
/* driver registration */
/*---------------------*/
/* table of devices that work with this driver */
static struct usb_device_id iowarrior_ids[] = {
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)},
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)},
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)},
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV2)},
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, iowarrior_ids);
/*
* USB callback handler for reading data
*/
static void iowarrior_callback(struct urb *urb)
{
struct iowarrior *dev = (struct iowarrior *)urb->context;
int intr_idx;
int read_idx;
int aux_idx;
int offset;
int status;
switch (urb->status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
return;
default:
goto exit;
}
spin_lock(&dev->intr_idx_lock);
intr_idx = atomic_read(&dev->intr_idx);
/* aux_idx become previous intr_idx */
aux_idx = (intr_idx == 0) ? (MAX_INTERRUPT_BUFFER - 1) : (intr_idx - 1);
read_idx = atomic_read(&dev->read_idx);
/* queue is not empty and it's interface 0 */
if ((intr_idx != read_idx)
&& (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0)) {
/* + 1 for serial number */
offset = aux_idx * (dev->report_size + 1);
if (!memcmp
(dev->read_queue + offset, urb->transfer_buffer,
dev->report_size)) {
/* equal values on interface 0 will be ignored */
spin_unlock(&dev->intr_idx_lock);
goto exit;
}
}
/* aux_idx become next intr_idx */
aux_idx = (intr_idx == (MAX_INTERRUPT_BUFFER - 1)) ? 0 : (intr_idx + 1);
if (read_idx == aux_idx) {
/* queue full, dropping oldest input */
read_idx = (++read_idx == MAX_INTERRUPT_BUFFER) ? 0 : read_idx;
atomic_set(&dev->read_idx, read_idx);
atomic_set(&dev->overflow_flag, 1);
}
/* +1 for serial number */
offset = intr_idx * (dev->report_size + 1);
memcpy(dev->read_queue + offset, urb->transfer_buffer,
dev->report_size);
*(dev->read_queue + offset + (dev->report_size)) = dev->serial_number++;
atomic_set(&dev->intr_idx, aux_idx);
spin_unlock(&dev->intr_idx_lock);
/* tell the blocking read about the new data */
wake_up_interruptible(&dev->read_wait);
exit:
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status)
dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d",
__FUNCTION__, status);
}
/*
* USB Callback handler for write-ops
*/
static void iowarrior_write_callback(struct urb *urb)
{
struct iowarrior *dev;
dev = (struct iowarrior *)urb->context;
/* sync/async unlink faults aren't errors */
if (urb->status &&
!(urb->status == -ENOENT ||
urb->status == -ECONNRESET || urb->status == -ESHUTDOWN)) {
dbg("%s - nonzero write bulk status received: %d",
__func__, urb->status);
}
/* free up our allocated buffer */
usb_buffer_free(urb->dev, urb->transfer_buffer_length,
urb->transfer_buffer, urb->transfer_dma);
/* tell a waiting writer the interrupt-out-pipe is available again */
atomic_dec(&dev->write_busy);
wake_up_interruptible(&dev->write_wait);
}
/**
* iowarrior_delete
*/
static inline void iowarrior_delete(struct iowarrior *dev)
{
dbg("%s - minor %d", __func__, dev->minor);
kfree(dev->int_in_buffer);
usb_free_urb(dev->int_in_urb);
kfree(dev->read_queue);
kfree(dev);
}
/*---------------------*/
/* fops implementation */
/*---------------------*/
static int read_index(struct iowarrior *dev)
{
int intr_idx, read_idx;
read_idx = atomic_read(&dev->read_idx);
intr_idx = atomic_read(&dev->intr_idx);
return (read_idx == intr_idx ? -1 : read_idx);
}
/**
* iowarrior_read
*/
static ssize_t iowarrior_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct iowarrior *dev;
int read_idx;
int offset;
dev = (struct iowarrior *)file->private_data;
/* verify that the device wasn't unplugged */
if (dev == NULL || !dev->present)
return -ENODEV;
dbg("%s - minor %d, count = %zd", __func__, dev->minor, count);
/* read count must be packet size (+ time stamp) */
if ((count != dev->report_size)
&& (count != (dev->report_size + 1)))
return -EINVAL;
/* repeat until no buffer overrun in callback handler occur */
do {
atomic_set(&dev->overflow_flag, 0);
if ((read_idx = read_index(dev)) == -1) {
/* queue emty */
if (file->f_flags & O_NONBLOCK)
return -EAGAIN;
else {
//next line will return when there is either new data, or the device is unplugged
int r = wait_event_interruptible(dev->read_wait,
(!dev->present
|| (read_idx =
read_index
(dev)) !=
-1));
if (r) {
//we were interrupted by a signal
return -ERESTART;
}
if (!dev->present) {
//The device was unplugged
return -ENODEV;
}
if (read_idx == -1) {
// Can this happen ???
return 0;
}
}
}
offset = read_idx * (dev->report_size + 1);
if (copy_to_user(buffer, dev->read_queue + offset, count)) {
return -EFAULT;
}
} while (atomic_read(&dev->overflow_flag));
read_idx = ++read_idx == MAX_INTERRUPT_BUFFER ? 0 : read_idx;
atomic_set(&dev->read_idx, read_idx);
return count;
}
/*
* iowarrior_write
*/
static ssize_t iowarrior_write(struct file *file,
const char __user *user_buffer,
size_t count, loff_t *ppos)
{
struct iowarrior *dev;
int retval = 0;
char *buf = NULL; /* for IOW24 and IOW56 we need a buffer */
struct urb *int_out_urb = NULL;
dev = (struct iowarrior *)file->private_data;
mutex_lock(&dev->mutex);
/* verify that the device wasn't unplugged */
if (dev == NULL || !dev->present) {
retval = -ENODEV;
goto exit;
}
dbg("%s - minor %d, count = %zd", __func__, dev->minor, count);
/* if count is 0 we're already done */
if (count == 0) {
retval = 0;
goto exit;
}
/* We only accept full reports */
if (count != dev->report_size) {
retval = -EINVAL;
goto exit;
}
switch (dev->product_id) {
case USB_DEVICE_ID_CODEMERCS_IOW24:
case USB_DEVICE_ID_CODEMERCS_IOWPV1:
case USB_DEVICE_ID_CODEMERCS_IOWPV2:
case USB_DEVICE_ID_CODEMERCS_IOW40:
/* IOW24 and IOW40 use a synchronous call */
buf = kmalloc(8, GFP_KERNEL); /* 8 bytes are enough for both products */
if (!buf) {
retval = -ENOMEM;
goto exit;
}
if (copy_from_user(buf, user_buffer, count)) {
retval = -EFAULT;
kfree(buf);
goto exit;
}
retval = usb_set_report(dev->interface, 2, 0, buf, count);
kfree(buf);
goto exit;
break;
case USB_DEVICE_ID_CODEMERCS_IOW56:
/* The IOW56 uses asynchronous IO and more urbs */
if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
/* Wait until we are below the limit for submitted urbs */
if (file->f_flags & O_NONBLOCK) {
retval = -EAGAIN;
goto exit;
} else {
retval = wait_event_interruptible(dev->write_wait,
(!dev->present || (atomic_read (&dev-> write_busy) < MAX_WRITES_IN_FLIGHT)));
if (retval) {
/* we were interrupted by a signal */
retval = -ERESTART;
goto exit;
}
if (!dev->present) {
/* The device was unplugged */
retval = -ENODEV;
goto exit;
}
if (!dev->opened) {
/* We were closed while waiting for an URB */
retval = -ENODEV;
goto exit;
}
}
}
atomic_inc(&dev->write_busy);
int_out_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!int_out_urb) {
retval = -ENOMEM;
dbg("%s Unable to allocate urb ", __func__);
goto error;
}
buf = usb_buffer_alloc(dev->udev, dev->report_size,
GFP_KERNEL, &int_out_urb->transfer_dma);
if (!buf) {
retval = -ENOMEM;
dbg("%s Unable to allocate buffer ", __func__);
goto error;
}
usb_fill_int_urb(int_out_urb, dev->udev,
usb_sndintpipe(dev->udev,
dev->int_out_endpoint->bEndpointAddress),
buf, dev->report_size,
iowarrior_write_callback, dev,
dev->int_out_endpoint->bInterval);
int_out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
if (copy_from_user(buf, user_buffer, count)) {
retval = -EFAULT;
goto error;
}
retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
if (retval) {
dbg("%s submit error %d for urb nr.%d", __func__,
retval, atomic_read(&dev->write_busy));
goto error;
}
/* submit was ok */
retval = count;
usb_free_urb(int_out_urb);
goto exit;
break;
default:
/* what do we have here ? An unsupported Product-ID ? */
dev_err(&dev->interface->dev, "%s - not supported for product=0x%x",
__FUNCTION__, dev->product_id);
retval = -EFAULT;
goto exit;
break;
}
error:
usb_buffer_free(dev->udev, dev->report_size, buf,
int_out_urb->transfer_dma);
usb_free_urb(int_out_urb);
atomic_dec(&dev->write_busy);
wake_up_interruptible(&dev->write_wait);
exit:
mutex_unlock(&dev->mutex);
return retval;
}
/**
* iowarrior_ioctl
*/
static int iowarrior_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct iowarrior *dev = NULL;
__u8 *buffer;
__u8 __user *user_buffer;
int retval;
int io_res; /* checks for bytes read/written and copy_to/from_user results */
dev = (struct iowarrior *)file->private_data;
if (dev == NULL) {
return -ENODEV;
}
buffer = kzalloc(dev->report_size, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
/* lock this object */
mutex_lock(&dev->mutex);
/* verify that the device wasn't unplugged */
if (!dev->present) {
mutex_unlock(&dev->mutex);
return -ENODEV;
}
dbg("%s - minor %d, cmd 0x%.4x, arg %ld", __func__, dev->minor, cmd,
arg);
retval = 0;
io_res = 0;
switch (cmd) {
case IOW_WRITE:
if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24 ||
dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV1 ||
dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV2 ||
dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW40) {
user_buffer = (__u8 __user *)arg;
io_res = copy_from_user(buffer, user_buffer,
dev->report_size);
if (io_res) {
retval = -EFAULT;
} else {
io_res = usb_set_report(dev->interface, 2, 0,
buffer,
dev->report_size);
if (io_res < 0)
retval = io_res;
}
} else {
retval = -EINVAL;
dev_err(&dev->interface->dev,
"ioctl 'IOW_WRITE' is not supported for product=0x%x.",
dev->product_id);
}
break;
case IOW_READ:
user_buffer = (__u8 __user *)arg;
io_res = usb_get_report(dev->udev,
dev->interface->cur_altsetting, 1, 0,
buffer, dev->report_size);
if (io_res < 0)
retval = io_res;
else {
io_res = copy_to_user(user_buffer, buffer, dev->report_size);
if (io_res < 0)
retval = -EFAULT;
}
break;
case IOW_GETINFO:
{
/* Report available information for the device */
struct iowarrior_info info;
/* needed for power consumption */
struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
/* directly from the descriptor */
info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
info.product = dev->product_id;
info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice);
/* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */
info.speed = le16_to_cpu(dev->udev->speed);
info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber;
info.report_size = dev->report_size;
/* serial number string has been read earlier 8 chars or empty string */
memcpy(info.serial, dev->chip_serial,
sizeof(dev->chip_serial));
if (cfg_descriptor == NULL) {
info.power = -1; /* no information available */
} else {
/* the MaxPower is stored in units of 2mA to make it fit into a byte-value */
info.power = cfg_descriptor->bMaxPower * 2;
}
io_res = copy_to_user((struct iowarrior_info __user *)arg, &info,
sizeof(struct iowarrior_info));
if (io_res < 0)
retval = -EFAULT;
break;
}
default:
/* return that we did not understand this ioctl call */
retval = -ENOTTY;
break;
}
/* unlock the device */
mutex_unlock(&dev->mutex);
return retval;
}
/**
* iowarrior_open
*/
static int iowarrior_open(struct inode *inode, struct file *file)
{
struct iowarrior *dev = NULL;
struct usb_interface *interface;
int subminor;
int retval = 0;
dbg("%s", __func__);
subminor = iminor(inode);
/* prevent disconnects */
down(&disconnect_sem);
interface = usb_find_interface(&iowarrior_driver, subminor);
if (!interface) {
err("%s - error, can't find device for minor %d", __FUNCTION__,
subminor);
retval = -ENODEV;
goto out;
}
dev = usb_get_intfdata(interface);
if (!dev) {
retval = -ENODEV;
goto out;
}
/* Only one process can open each device, no sharing. */
if (dev->opened) {
retval = -EBUSY;
goto out;
}
/* setup interrupt handler for receiving values */
if ((retval = usb_submit_urb(dev->int_in_urb, GFP_KERNEL)) < 0) {
dev_err(&interface->dev, "Error %d while submitting URB\n", retval);
retval = -EFAULT;
goto out;
}
/* increment our usage count for the driver */
++dev->opened;
/* save our object in the file's private structure */
file->private_data = dev;
retval = 0;
out:
up(&disconnect_sem);
return retval;
}
/**
* iowarrior_release
*/
static int iowarrior_release(struct inode *inode, struct file *file)
{
struct iowarrior *dev;
int retval = 0;
dev = (struct iowarrior *)file->private_data;
if (dev == NULL) {
return -ENODEV;
}
dbg("%s - minor %d", __func__, dev->minor);
/* lock our device */
mutex_lock(&dev->mutex);
if (dev->opened <= 0) {
retval = -ENODEV; /* close called more than once */
mutex_unlock(&dev->mutex);
} else {
dev->opened = 0; /* we're closeing now */
retval = 0;
if (dev->present) {
/*
The device is still connected so we only shutdown
pending read-/write-ops.
*/
usb_kill_urb(dev->int_in_urb);
wake_up_interruptible(&dev->read_wait);
wake_up_interruptible(&dev->write_wait);
mutex_unlock(&dev->mutex);
} else {
/* The device was unplugged, cleanup resources */
mutex_unlock(&dev->mutex);
iowarrior_delete(dev);
}
}
return retval;
}
static unsigned iowarrior_poll(struct file *file, poll_table * wait)
{
struct iowarrior *dev = file->private_data;
unsigned int mask = 0;
if (!dev->present)
return POLLERR | POLLHUP;
poll_wait(file, &dev->read_wait, wait);
poll_wait(file, &dev->write_wait, wait);
if (!dev->present)
return POLLERR | POLLHUP;
if (read_index(dev) != -1)
mask |= POLLIN | POLLRDNORM;
if (atomic_read(&dev->write_busy) < MAX_WRITES_IN_FLIGHT)
mask |= POLLOUT | POLLWRNORM;
return mask;
}
/*
* File operations needed when we register this driver.
* This assumes that this driver NEEDS file operations,
* of course, which means that the driver is expected
* to have a node in the /dev directory. If the USB
* device were for a network interface then the driver
* would use "struct net_driver" instead, and a serial
* device would use "struct tty_driver".
*/
static struct file_operations iowarrior_fops = {
.owner = THIS_MODULE,
.write = iowarrior_write,
.read = iowarrior_read,
.ioctl = iowarrior_ioctl,
.open = iowarrior_open,
.release = iowarrior_release,
.poll = iowarrior_poll,
};
/*
* usb class driver info in order to get a minor number from the usb core,
* and to have the device registered with devfs and the driver core
*/
static struct usb_class_driver iowarrior_class = {
.name = "iowarrior%d",
.fops = &iowarrior_fops,
.minor_base = IOWARRIOR_MINOR_BASE,
};
/*---------------------------------*/
/* probe and disconnect functions */
/*---------------------------------*/
/**
* iowarrior_probe
*
* Called by the usb core when a new device is connected that it thinks
* this driver might be interested in.
*/
static int iowarrior_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
struct iowarrior *dev = NULL;
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
int i;
int retval = -ENOMEM;
int idele = 0;
/* allocate memory for our device state and intialize it */
dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
if (dev == NULL) {
dev_err(&interface->dev, "Out of memory");
return retval;
}
mutex_init(&dev->mutex);
atomic_set(&dev->intr_idx, 0);
atomic_set(&dev->read_idx, 0);
spin_lock_init(&dev->intr_idx_lock);
atomic_set(&dev->overflow_flag, 0);
init_waitqueue_head(&dev->read_wait);
atomic_set(&dev->write_busy, 0);
init_waitqueue_head(&dev->write_wait);
dev->udev = udev;
dev->interface = interface;
iface_desc = interface->cur_altsetting;
dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
/* set up the endpoint information */
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
endpoint = &iface_desc->endpoint[i].desc;
if (usb_endpoint_is_int_in(endpoint))
dev->int_in_endpoint = endpoint;
if (usb_endpoint_is_int_out(endpoint))
/* this one will match for the IOWarrior56 only */
dev->int_out_endpoint = endpoint;
}
/* we have to check the report_size often, so remember it in the endianess suitable for our machine */
dev->report_size = le16_to_cpu(dev->int_in_endpoint->wMaxPacketSize);
if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
(dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56))
/* IOWarrior56 has wMaxPacketSize different from report size */
dev->report_size = 7;
/* create the urb and buffer for reading */
dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->int_in_urb) {
dev_err(&interface->dev, "Couldn't allocate interrupt_in_urb\n");
goto error;
}
dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL);
if (!dev->int_in_buffer) {
dev_err(&interface->dev, "Couldn't allocate int_in_buffer\n");
goto error;
}
usb_fill_int_urb(dev->int_in_urb, dev->udev,
usb_rcvintpipe(dev->udev,
dev->int_in_endpoint->bEndpointAddress),
dev->int_in_buffer, dev->report_size,
iowarrior_callback, dev,
dev->int_in_endpoint->bInterval);
/* create an internal buffer for interrupt data from the device */
dev->read_queue =
kmalloc(((dev->report_size + 1) * MAX_INTERRUPT_BUFFER),
GFP_KERNEL);
if (!dev->read_queue) {
dev_err(&interface->dev, "Couldn't allocate read_queue\n");
goto error;
}
/* Get the serial-number of the chip */
memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial,
sizeof(dev->chip_serial));
if (strlen(dev->chip_serial) != 8)
memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
/* Set the idle timeout to 0, if this is interface 0 */
if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
idele = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x0A,
USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
0, NULL, 0, USB_CTRL_SET_TIMEOUT);
dbg("idele = %d", idele);
}
/* allow device read and ioctl */
dev->present = 1;
/* we can register the device now, as it is ready */
usb_set_intfdata(interface, dev);
retval = usb_register_dev(interface, &iowarrior_class);
if (retval) {
/* something prevented us from registering this driver */
dev_err(&interface->dev, "Not able to get a minor for this device.\n");
usb_set_intfdata(interface, NULL);
goto error;
}
dev->minor = interface->minor;
/* let the user know what node this device is now attached to */
dev_info(&interface->dev, "IOWarrior product=0x%x, serial=%s interface=%d "
"now attached to iowarrior%d\n", dev->product_id, dev->chip_serial,
iface_desc->desc.bInterfaceNumber, dev->minor - IOWARRIOR_MINOR_BASE);
return retval;
error:
iowarrior_delete(dev);
return retval;
}
/**
* iowarrior_disconnect
*
* Called by the usb core when the device is removed from the system.
*/
static void iowarrior_disconnect(struct usb_interface *interface)
{
struct iowarrior *dev;
int minor;
/* prevent races with open() */
down(&disconnect_sem);
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
mutex_lock(&dev->mutex);
minor = dev->minor;
/* give back our minor */
usb_deregister_dev(interface, &iowarrior_class);
/* prevent device read, write and ioctl */
dev->present = 0;
mutex_unlock(&dev->mutex);
if (dev->opened) {
/* There is a process that holds a filedescriptor to the device ,
so we only shutdown read-/write-ops going on.
Deleting the device is postponed until close() was called.
*/
usb_kill_urb(dev->int_in_urb);
wake_up_interruptible(&dev->read_wait);
wake_up_interruptible(&dev->write_wait);
} else {
/* no process is using the device, cleanup now */
iowarrior_delete(dev);
}
up(&disconnect_sem);
dev_info(&interface->dev, "I/O-Warror #%d now disconnected\n",
minor - IOWARRIOR_MINOR_BASE);
}
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver iowarrior_driver = {
.name = "iowarrior",
.probe = iowarrior_probe,
.disconnect = iowarrior_disconnect,
.id_table = iowarrior_ids,
};
static int __init iowarrior_init(void)
{
return usb_register(&iowarrior_driver);
}
static void __exit iowarrior_exit(void)
{
usb_deregister(&iowarrior_driver);
}
module_init(iowarrior_init);
module_exit(iowarrior_exit);
......@@ -1165,7 +1165,7 @@ int __init mon_bin_init(void)
return rc;
}
void __exit mon_bin_exit(void)
void mon_bin_exit(void)
{
cdev_del(&mon_bin_cdev);
unregister_chrdev_region(mon_bin_dev0, MON_BIN_MAX_MINOR);
......
......@@ -520,7 +520,7 @@ int __init mon_text_init(void)
return 0;
}
void __exit mon_text_exit(void)
void mon_text_exit(void)
{
debugfs_remove(mon_dir);
}
......@@ -57,9 +57,9 @@ void mon_text_del(struct mon_bus *mbus);
// void mon_bin_add(struct mon_bus *);
int __init mon_text_init(void);
void __exit mon_text_exit(void);
void mon_text_exit(void);
int __init mon_bin_init(void);
void __exit mon_bin_exit(void);
void mon_bin_exit(void);
/*
* DMA interface.
......
......@@ -186,6 +186,15 @@ config USB_NET_CDCETHER
IEEE 802 "local assignment" bit is set in the address, a "usbX"
name is used instead.
config USB_NET_DM9601
tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
depends on USB_USBNET
select CRC32
select USB_USBNET_MII
help
This option adds support for Davicom DM9601 based USB 1.1
10/100 Ethernet adapters.
config USB_NET_GL620A
tristate "GeneSys GL620USB-A based cables"
depends on USB_USBNET
......
......@@ -8,6 +8,7 @@ obj-$(CONFIG_USB_PEGASUS) += pegasus.o
obj-$(CONFIG_USB_RTL8150) += rtl8150.o
obj-$(CONFIG_USB_NET_AX8817X) += asix.o
obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
obj-$(CONFIG_USB_NET_NET1080) += net1080.o
obj-$(CONFIG_USB_NET_PLUSB) += plusb.o
......
......@@ -1395,9 +1395,9 @@ static const struct usb_device_id products [] = {
USB_DEVICE (0x07b8, 0x420a),
.driver_info = (unsigned long) &hawking_uf200_info,
}, {
// Billionton Systems, USB2AR
USB_DEVICE (0x08dd, 0x90ff),
.driver_info = (unsigned long) &ax8817x_info,
// Billionton Systems, USB2AR
USB_DEVICE (0x08dd, 0x90ff),
.driver_info = (unsigned long) &ax8817x_info,
}, {
// ATEN UC210T
USB_DEVICE (0x0557, 0x2009),
......@@ -1422,10 +1422,14 @@ static const struct usb_device_id products [] = {
// goodway corp usb gwusb2e
USB_DEVICE (0x1631, 0x6200),
.driver_info = (unsigned long) &ax8817x_info,
}, {
// JVC MP-PRX1 Port Replicator
USB_DEVICE (0x04f1, 0x3008),
.driver_info = (unsigned long) &ax8817x_info,
}, {
// ASIX AX88772 10/100
USB_DEVICE (0x0b95, 0x7720),
.driver_info = (unsigned long) &ax88772_info,
USB_DEVICE (0x0b95, 0x7720),
.driver_info = (unsigned long) &ax88772_info,
}, {
// ASIX AX88178 10/100/1000
USB_DEVICE (0x0b95, 0x1780),
......
/*
* Davicom DM9601 USB 1.1 10/100Mbps ethernet devices
*
* Peter Korsgaard <jacmet@sunsite.dk>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
//#define DEBUG
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/crc32.h>
#include "usbnet.h"
/* datasheet:
http://www.davicom.com.tw/big5/download/Data%20Sheet/DM9601-DS-P01-930914.pdf
*/
/* control requests */
#define DM_READ_REGS 0x00
#define DM_WRITE_REGS 0x01
#define DM_READ_MEMS 0x02
#define DM_WRITE_REG 0x03
#define DM_WRITE_MEMS 0x05
#define DM_WRITE_MEM 0x07
/* registers */
#define DM_NET_CTRL 0x00
#define DM_RX_CTRL 0x05
#define DM_SHARED_CTRL 0x0b
#define DM_SHARED_ADDR 0x0c
#define DM_SHARED_DATA 0x0d /* low + high */
#define DM_PHY_ADDR 0x10 /* 6 bytes */
#define DM_MCAST_ADDR 0x16 /* 8 bytes */
#define DM_GPR_CTRL 0x1e
#define DM_GPR_DATA 0x1f
#define DM_MAX_MCAST 64
#define DM_MCAST_SIZE 8
#define DM_EEPROM_LEN 256
#define DM_TX_OVERHEAD 2 /* 2 byte header */
#define DM_RX_OVERHEAD 7 /* 3 byte header + 4 byte crc tail */
#define DM_TIMEOUT 1000
static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
{
devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length);
return usb_control_msg(dev->udev,
usb_rcvctrlpipe(dev->udev, 0),
DM_READ_REGS,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, reg, data, length, USB_CTRL_SET_TIMEOUT);
}
static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
{
return dm_read(dev, reg, 1, value);
}
static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
{
devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length);
return usb_control_msg(dev->udev,
usb_sndctrlpipe(dev->udev, 0),
DM_WRITE_REGS,
USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
0, reg, data, length, USB_CTRL_SET_TIMEOUT);
}
static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
{
devdbg(dev, "dm_write_reg() reg=0x%02x, value=0x%02x", reg, value);
return usb_control_msg(dev->udev,
usb_sndctrlpipe(dev->udev, 0),
DM_WRITE_REG,
USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
value, reg, 0, 0, USB_CTRL_SET_TIMEOUT);
}
static void dm_write_async_callback(struct urb *urb)
{
struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
if (urb->status < 0)
printk(KERN_DEBUG "dm_write_async_callback() failed with %d",
urb->status);
kfree(req);
usb_free_urb(urb);
}
static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
{
struct usb_ctrlrequest *req;
struct urb *urb;
int status;
devdbg(dev, "dm_write_async() reg=0x%02x length=%d", reg, length);
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
deverr(dev, "Error allocating URB in dm_write_async!");
return;
}
req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
if (!req) {
deverr(dev, "Failed to allocate memory for control request");
usb_free_urb(urb);
return;
}
req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
req->bRequest = DM_WRITE_REGS;
req->wValue = 0;
req->wIndex = cpu_to_le16(reg);
req->wLength = cpu_to_le16(length);
usb_fill_control_urb(urb, dev->udev,
usb_sndctrlpipe(dev->udev, 0),
(void *)req, data, length,
dm_write_async_callback, req);
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
deverr(dev, "Error submitting the control message: status=%d",
status);
kfree(req);
usb_free_urb(urb);
}
}
static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
{
struct usb_ctrlrequest *req;
struct urb *urb;
int status;
devdbg(dev, "dm_write_reg_async() reg=0x%02x value=0x%02x",
reg, value);
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
deverr(dev, "Error allocating URB in dm_write_async!");
return;
}
req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
if (!req) {
deverr(dev, "Failed to allocate memory for control request");
usb_free_urb(urb);
return;
}
req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
req->bRequest = DM_WRITE_REG;
req->wValue = cpu_to_le16(value);
req->wIndex = cpu_to_le16(reg);
req->wLength = 0;
usb_fill_control_urb(urb, dev->udev,
usb_sndctrlpipe(dev->udev, 0),
(void *)req, 0, 0, dm_write_async_callback, req);
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
deverr(dev, "Error submitting the control message: status=%d",
status);
kfree(req);
usb_free_urb(urb);
}
}
static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, u16 *value)
{
int ret, i;
mutex_lock(&dev->phy_mutex);
dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0xc : 0x4);
for (i = 0; i < DM_TIMEOUT; i++) {
u8 tmp;
udelay(1);
ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
if (ret < 0)
goto out;
/* ready */
if ((tmp & 1) == 0)
break;
}
if (i == DM_TIMEOUT) {
deverr(dev, "%s read timed out!", phy ? "phy" : "eeprom");
ret = -EIO;
goto out;
}
dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
ret = dm_read(dev, DM_SHARED_DATA, 2, value);
devdbg(dev, "read shared %d 0x%02x returned 0x%04x, %d",
phy, reg, *value, ret);
out:
mutex_unlock(&dev->phy_mutex);
return ret;
}
static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, u16 value)
{
int ret, i;
mutex_lock(&dev->phy_mutex);
ret = dm_write(dev, DM_SHARED_DATA, 2, &value);
if (ret < 0)
goto out;
dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14);
for (i = 0; i < DM_TIMEOUT; i++) {
u8 tmp;
udelay(1);
ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
if (ret < 0)
goto out;
/* ready */
if ((tmp & 1) == 0)
break;
}
if (i == DM_TIMEOUT) {
deverr(dev, "%s write timed out!", phy ? "phy" : "eeprom");
ret = -EIO;
goto out;
}
dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
out:
mutex_unlock(&dev->phy_mutex);
return ret;
}
static int dm_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
{
return dm_read_shared_word(dev, 0, offset, value);
}
static int dm9601_get_eeprom_len(struct net_device *dev)
{
return DM_EEPROM_LEN;
}
static int dm9601_get_eeprom(struct net_device *net,
struct ethtool_eeprom *eeprom, u8 * data)
{
struct usbnet *dev = netdev_priv(net);
u16 *ebuf = (u16 *) data;
int i;
/* access is 16bit */
if ((eeprom->offset % 2) || (eeprom->len % 2))
return -EINVAL;
for (i = 0; i < eeprom->len / 2; i++) {
if (dm_read_eeprom_word(dev, eeprom->offset / 2 + i,
&ebuf[i]) < 0)
return -EINVAL;
}
return 0;
}
static int dm9601_mdio_read(struct net_device *netdev, int phy_id, int loc)
{
struct usbnet *dev = netdev_priv(netdev);
u16 res;
if (phy_id) {
devdbg(dev, "Only internal phy supported");
return 0;
}
dm_read_shared_word(dev, 1, loc, &res);
devdbg(dev,
"dm9601_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x",
phy_id, loc, le16_to_cpu(res));
return le16_to_cpu(res);
}
static void dm9601_mdio_write(struct net_device *netdev, int phy_id, int loc,
int val)
{
struct usbnet *dev = netdev_priv(netdev);
u16 res = cpu_to_le16(val);
if (phy_id) {
devdbg(dev, "Only internal phy supported");
return;
}
devdbg(dev,"dm9601_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x",
phy_id, loc, val);
dm_write_shared_word(dev, 1, loc, res);
}
static void dm9601_get_drvinfo(struct net_device *net,
struct ethtool_drvinfo *info)
{
/* Inherit standard device info */
usbnet_get_drvinfo(net, info);
info->eedump_len = DM_EEPROM_LEN;
}
static u32 dm9601_get_link(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
return mii_link_ok(&dev->mii);
}
static int dm9601_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
{
struct usbnet *dev = netdev_priv(net);
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
}
static struct ethtool_ops dm9601_ethtool_ops = {
.get_drvinfo = dm9601_get_drvinfo,
.get_link = dm9601_get_link,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
.get_eeprom_len = dm9601_get_eeprom_len,
.get_eeprom = dm9601_get_eeprom,
.get_settings = usbnet_get_settings,
.set_settings = usbnet_set_settings,
.nway_reset = usbnet_nway_reset,
};
static void dm9601_set_multicast(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
/* We use the 20 byte dev->data for our 8 byte filter buffer
* to avoid allocating memory that is tricky to free later */
u8 *hashes = (u8 *) & dev->data;
u8 rx_ctl = 0x01;
memset(hashes, 0x00, DM_MCAST_SIZE);
hashes[DM_MCAST_SIZE - 1] |= 0x80; /* broadcast address */
if (net->flags & IFF_PROMISC) {
rx_ctl |= 0x02;
} else if (net->flags & IFF_ALLMULTI || net->mc_count > DM_MAX_MCAST) {
rx_ctl |= 0x04;
} else if (net->mc_count) {
struct dev_mc_list *mc_list = net->mc_list;
int i;
for (i = 0; i < net->mc_count; i++) {
u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
hashes[crc >> 3] |= 1 << (crc & 0x7);
}
}
dm_write_async(dev, DM_MCAST_ADDR, DM_MCAST_SIZE, hashes);
dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl);
}
static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret;
ret = usbnet_get_endpoints(dev, intf);
if (ret)
goto out;
dev->net->do_ioctl = dm9601_ioctl;
dev->net->set_multicast_list = dm9601_set_multicast;
dev->net->ethtool_ops = &dm9601_ethtool_ops;
dev->net->hard_header_len += DM_TX_OVERHEAD;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
dev->rx_urb_size = dev->net->mtu + DM_RX_OVERHEAD;
dev->mii.dev = dev->net;
dev->mii.mdio_read = dm9601_mdio_read;
dev->mii.mdio_write = dm9601_mdio_write;
dev->mii.phy_id_mask = 0x1f;
dev->mii.reg_num_mask = 0x1f;
/* reset */
ret = dm_write_reg(dev, DM_NET_CTRL, 1);
udelay(20);
/* read MAC */
ret = dm_read(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr);
if (ret < 0) {
printk(KERN_ERR "Error reading MAC address\n");
ret = -ENODEV;
goto out;
}
/* power up phy */
dm_write_reg(dev, DM_GPR_CTRL, 1);
dm_write_reg(dev, DM_GPR_DATA, 0);
/* receive broadcast packets */
dm9601_set_multicast(dev->net);
dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
mii_nway_restart(&dev->mii);
out:
return ret;
}
static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
u8 status;
int len;
/* format:
b0: rx status
b1: packet length (incl crc) low
b2: packet length (incl crc) high
b3..n-4: packet data
bn-3..bn: ethernet crc
*/
if (unlikely(skb->len < DM_RX_OVERHEAD)) {
dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
return 0;
}
status = skb->data[0];
len = (skb->data[1] | (skb->data[2] << 8)) - 4;
if (unlikely(status & 0xbf)) {
if (status & 0x01) dev->stats.rx_fifo_errors++;
if (status & 0x02) dev->stats.rx_crc_errors++;
if (status & 0x04) dev->stats.rx_frame_errors++;
if (status & 0x20) dev->stats.rx_missed_errors++;
if (status & 0x90) dev->stats.rx_length_errors++;
return 0;
}
skb_pull(skb, 3);
skb_trim(skb, len);
return 1;
}
static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
gfp_t flags)
{
int len;
/* format:
b0: packet length low
b1: packet length high
b3..n: packet data
*/
if (skb_headroom(skb) < DM_TX_OVERHEAD) {
struct sk_buff *skb2;
skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, 0, flags);
dev_kfree_skb_any(skb);
skb = skb2;
if (!skb)
return NULL;
}
__skb_push(skb, DM_TX_OVERHEAD);
len = skb->len;
/* usbnet adds padding if length is a multiple of packet size
if so, adjust length value in header */
if ((len % dev->maxpacket) == 0)
len++;
skb->data[0] = len;
skb->data[1] = len >> 8;
return skb;
}
static void dm9601_status(struct usbnet *dev, struct urb *urb)
{
int link;
u8 *buf;
/* format:
b0: net status
b1: tx status 1
b2: tx status 2
b3: rx status
b4: rx overflow
b5: rx count
b6: tx count
b7: gpr
*/
if (urb->actual_length < 8)
return;
buf = urb->transfer_buffer;
link = !!(buf[0] & 0x40);
if (netif_carrier_ok(dev->net) != link) {
if (link) {
netif_carrier_on(dev->net);
usbnet_defer_kevent (dev, EVENT_LINK_RESET);
}
else
netif_carrier_off(dev->net);
devdbg(dev, "Link Status is: %d", link);
}
}
static int dm9601_link_reset(struct usbnet *dev)
{
struct ethtool_cmd ecmd;
mii_check_media(&dev->mii, 1, 1);
mii_ethtool_gset(&dev->mii, &ecmd);
devdbg(dev, "link_reset() speed: %d duplex: %d",
ecmd.speed, ecmd.duplex);
return 0;
}
static const struct driver_info dm9601_info = {
.description = "Davicom DM9601 USB Ethernet",
.flags = FLAG_ETHER,
.bind = dm9601_bind,
.rx_fixup = dm9601_rx_fixup,
.tx_fixup = dm9601_tx_fixup,
.status = dm9601_status,
.link_reset = dm9601_link_reset,
.reset = dm9601_link_reset,
};
static const struct usb_device_id products[] = {
{
USB_DEVICE(0x0a46, 0x9601), /* Davicom USB-100 */
.driver_info = (unsigned long)&dm9601_info,
},
{}, // END
};
MODULE_DEVICE_TABLE(usb, products);
static struct usb_driver dm9601_driver = {
.name = "dm9601",
.id_table = products,
.probe = usbnet_probe,
.disconnect = usbnet_disconnect,
.suspend = usbnet_suspend,
.resume = usbnet_resume,
};
static int __init dm9601_init(void)
{
return usb_register(&dm9601_driver);
}
static void __exit dm9601_exit(void)
{
usb_deregister(&dm9601_driver);
}
module_init(dm9601_init);
module_exit(dm9601_exit);
MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
MODULE_DESCRIPTION("Davicom DM9601 USB 1.1 ethernet devices");
MODULE_LICENSE("GPL");
......@@ -513,6 +513,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
......
......@@ -491,6 +491,12 @@
#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
/*
* Telldus Technologies
*/
#define TELLDUS_VID 0x1781 /* Vendor ID */
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
......
......@@ -67,50 +67,95 @@ static int option_tiocmset(struct usb_serial_port *port, struct file *file,
static int option_send_setup(struct usb_serial_port *port);
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
#define HUAWEI_VENDOR_ID 0x12D1
#define NOVATELWIRELESS_VENDOR_ID 0x1410
#define ANYDATA_VENDOR_ID 0x16d5
#define OPTION_PRODUCT_OLD 0x5000
#define OPTION_PRODUCT_FUSION 0x6000
#define OPTION_PRODUCT_FUSION2 0x6300
#define OPTION_PRODUCT_COBRA 0x6500
#define OPTION_PRODUCT_COBRA2 0x6600
#define OPTION_PRODUCT_GTMAX36 0x6701
#define HUAWEI_PRODUCT_E600 0x1001
#define HUAWEI_PRODUCT_E220 0x1003
#define NOVATELWIRELESS_PRODUCT_U740 0x1400
#define ANYDATA_PRODUCT_ID 0x6501
#define OPTION_VENDOR_ID 0x0AF0
#define OPTION_PRODUCT_COLT 0x5000
#define OPTION_PRODUCT_RICOLA 0x6000
#define OPTION_PRODUCT_RICOLA_LIGHT 0x6100
#define OPTION_PRODUCT_RICOLA_QUAD 0x6200
#define OPTION_PRODUCT_RICOLA_QUAD_LIGHT 0x6300
#define OPTION_PRODUCT_RICOLA_NDIS 0x6050
#define OPTION_PRODUCT_RICOLA_NDIS_LIGHT 0x6150
#define OPTION_PRODUCT_RICOLA_NDIS_QUAD 0x6250
#define OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT 0x6350
#define OPTION_PRODUCT_COBRA 0x6500
#define OPTION_PRODUCT_COBRA_BUS 0x6501
#define OPTION_PRODUCT_VIPER 0x6600
#define OPTION_PRODUCT_VIPER_BUS 0x6601
#define OPTION_PRODUCT_GT_MAX_READY 0x6701
#define OPTION_PRODUCT_GT_MAX 0x6711
#define OPTION_PRODUCT_FUJI_MODEM_LIGHT 0x6721
#define OPTION_PRODUCT_FUJI_MODEM_GT 0x6741
#define OPTION_PRODUCT_FUJI_MODEM_EX 0x6761
#define OPTION_PRODUCT_FUJI_NETWORK_LIGHT 0x6731
#define OPTION_PRODUCT_FUJI_NETWORK_GT 0x6751
#define OPTION_PRODUCT_FUJI_NETWORK_EX 0x6771
#define OPTION_PRODUCT_KOI_MODEM 0x6800
#define OPTION_PRODUCT_KOI_NETWORK 0x6811
#define OPTION_PRODUCT_SCORPION_MODEM 0x6901
#define OPTION_PRODUCT_SCORPION_NETWORK 0x6911
#define OPTION_PRODUCT_ETNA_MODEM 0x7001
#define OPTION_PRODUCT_ETNA_NETWORK 0x7011
#define OPTION_PRODUCT_ETNA_MODEM_LITE 0x7021
#define OPTION_PRODUCT_ETNA_MODEM_GT 0x7041
#define OPTION_PRODUCT_ETNA_MODEM_EX 0x7061
#define OPTION_PRODUCT_ETNA_NETWORK_LITE 0x7031
#define OPTION_PRODUCT_ETNA_NETWORK_GT 0x7051
#define OPTION_PRODUCT_ETNA_NETWORK_EX 0x7071
#define OPTION_PRODUCT_ETNA_KOI_MODEM 0x7100
#define OPTION_PRODUCT_ETNA_KOI_NETWORK 0x7111
#define HUAWEI_VENDOR_ID 0x12D1
#define HUAWEI_PRODUCT_E600 0x1001
#define HUAWEI_PRODUCT_E220 0x1003
#define NOVATELWIRELESS_VENDOR_ID 0x1410
#define NOVATELWIRELESS_PRODUCT_U740 0x1400
#define ANYDATA_VENDOR_ID 0x16d5
#define ANYDATA_PRODUCT_ID 0x6501
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD_LIGHT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_LIGHT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA_BUS) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER_BUS) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX_READY) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_LIGHT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_GT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_EX) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_LIGHT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_GT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_EX) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_MODEM) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_NETWORK) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_MODEM) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_NETWORK) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_LITE) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_LITE) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_GT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
};
static struct usb_device_id option_ids1[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
static struct usb_driver option_driver = {
......@@ -132,7 +177,7 @@ static struct usb_serial_driver option_1port_device = {
},
.description = "GSM modem (1-port)",
.usb_driver = &option_driver,
.id_table = option_ids1,
.id_table = option_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
......
......@@ -501,6 +501,30 @@ int sysfs_create_file(struct kobject * kobj, const struct attribute * attr)
}
/**
* sysfs_add_file_to_group - add an attribute file to a pre-existing group.
* @kobj: object we're acting for.
* @attr: attribute descriptor.
* @group: group name.
*/
int sysfs_add_file_to_group(struct kobject *kobj,
const struct attribute *attr, const char *group)
{
struct dentry *dir;
int error;
dir = lookup_one_len(group, kobj->dentry, strlen(group));
if (IS_ERR(dir))
error = PTR_ERR(dir);
else {
error = sysfs_add_file(dir, attr, SYSFS_KOBJ_ATTR);
dput(dir);
}
return error;
}
EXPORT_SYMBOL_GPL(sysfs_add_file_to_group);
/**
* sysfs_update_file - update the modified timestamp on an object attribute.
* @kobj: object we're acting for.
......@@ -586,6 +610,26 @@ void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr)
}
/**
* sysfs_remove_file_from_group - remove an attribute file from a group.
* @kobj: object we're acting for.
* @attr: attribute descriptor.
* @group: group name.
*/
void sysfs_remove_file_from_group(struct kobject *kobj,
const struct attribute *attr, const char *group)
{
struct dentry *dir;
dir = lookup_one_len(group, kobj->dentry, strlen(group));
if (!IS_ERR(dir)) {
sysfs_hash_and_remove(dir, attr->name);
dput(dir);
}
}
EXPORT_SYMBOL_GPL(sysfs_remove_file_from_group);
EXPORT_SYMBOL_GPL(sysfs_create_file);
EXPORT_SYMBOL_GPL(sysfs_remove_file);
EXPORT_SYMBOL_GPL(sysfs_update_file);
......@@ -126,6 +126,11 @@ void sysfs_remove_bin_file(struct kobject *kobj, struct bin_attribute *attr);
int __must_check sysfs_create_group(struct kobject *,
const struct attribute_group *);
void sysfs_remove_group(struct kobject *, const struct attribute_group *);
int sysfs_add_file_to_group(struct kobject *kobj,
const struct attribute *attr, const char *group);
void sysfs_remove_file_from_group(struct kobject *kobj,
const struct attribute *attr, const char *group);
void sysfs_notify(struct kobject * k, char *dir, char *attr);
......@@ -210,6 +215,18 @@ static inline void sysfs_remove_group(struct kobject * k, const struct attribute
;
}
static inline int sysfs_add_file_to_group(struct kobject *kobj,
const struct attribute *attr, const char *group)
{
return 0;
}
static inline void sysfs_remove_file_from_group(struct kobject *kobj,
const struct attribute *attr, const char *group);
{
;
}
static inline void sysfs_notify(struct kobject * k, char *dir, char *attr)
{
}
......
......@@ -388,10 +388,14 @@ struct usb_device {
struct usb_device *children[USB_MAXCHILDREN];
int pm_usage_cnt; /* usage counter for autosuspend */
u32 quirks; /* quirks of the whole device */
#ifdef CONFIG_PM
struct delayed_work autosuspend; /* for delayed autosuspends */
struct mutex pm_mutex; /* protects PM operations */
unsigned autosuspend_delay; /* in jiffies */
unsigned auto_pm:1; /* autosuspend/resume in progress */
unsigned do_remote_wakeup:1; /* remote wakeup should be enabled */
#endif
......
/*
* This file holds USB constants and structures that are needed for USB
* device APIs. These are used by the USB device model, which is defined
* in chapter 9 of the USB 2.0 specification. Linux has several APIs in C
* that need these:
* This file holds USB constants and structures that are needed for
* USB device APIs. These are used by the USB device model, which is
* defined in chapter 9 of the USB 2.0 specification and in the
* Wireless USB 1.0 (spread around). Linux has several APIs in C that
* need these:
*
* - the master/host side Linux-USB kernel driver API;
* - the "usbfs" user space API; and
......@@ -14,6 +15,19 @@
*
* There's also "Wireless USB", using low power short range radios for
* peripheral interconnection but otherwise building on the USB framework.
*
* Note all descriptors are declared '__attribute__((packed))' so that:
*
* [a] they never get padded, either internally (USB spec writers
* probably handled that) or externally;
*
* [b] so that accessing bigger-than-a-bytes fields will never
* generate bus errors on any platform, even when the location of
* its descriptor inside a bundle isn't "naturally aligned", and
*
* [c] for consistency, removing all doubt even when it appears to
* someone that the two other points are non-issues for that
* particular descriptor type.
*/
#ifndef __LINUX_USB_CH9_H
......
#ifndef _IOWARRIOR_H_
#define _IOWARRIOR_H_
#define CODEMERCS_MAGIC_NUMBER 0xC0 /* like COde Mercenaries */
/* Define the ioctl commands for reading and writing data */
#define IOW_WRITE _IOW(CODEMERCS_MAGIC_NUMBER, 1, __u8 *)
#define IOW_READ _IOW(CODEMERCS_MAGIC_NUMBER, 2, __u8 *)
/*
A struct for available device info which is read
with the ioctl IOW_GETINFO.
To be compatible with 2.4 userspace which didn't have an easy way to get
this information.
*/
struct iowarrior_info {
__u32 vendor; /* vendor id : supposed to be USB_VENDOR_ID_CODEMERCS in all cases */
__u32 product; /* product id : depends on type of chip (USB_DEVICE_ID_CODEMERCS_XXXXX) */
__u8 serial[9]; /* the serial number of our chip (if a serial-number is not available this is empty string) */
__u32 revision; /* revision number of the chip */
__u32 speed; /* USB-speed of the device (0=UNKNOWN, 1=LOW, 2=FULL 3=HIGH) */
__u32 power; /* power consumption of the device in mA */
__u32 if_num; /* the number of the endpoint */
__u32 report_size; /* size of the data-packets on this interface */
};
/*
Get some device-information (product-id , serial-number etc.)
in order to identify a chip.
*/
#define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info)
#endif /* _IOWARRIOR_H_ */
/*
* This file holds the definitions of quirks found in USB devices.
* Only quirks that affect the whole device, not an interface,
* belong here.
*/
/* device must not be autosuspended */
#define USB_QUIRK_NO_AUTOSUSPEND 0x00000001
/* string descriptors must not be fetched using a 255-byte read */
#define USB_QUIRK_STRING_FETCH_255 0x00000002
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment