Commit 923769f7 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'v4.20-rockchip-dts64-1' of...

Merge tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

New soc support for the px30 quad-core Cortex-A35.
New boards are the px30 eval board and roc-rk3399-pc.
The rk3328 got support for the one gpio controlled via the general
register files and the rk3399 finally got its idle-states defined.
And finally fixes and improvements for firefly-rk3399 (wifi),
roc-rk3328-cc (sdmmc-uhs, io-domains), rk3328-rock64 (gpio-regulator
pin fix) and rk3399-sapphire (gpio-regulator pin fix, pmic pin fix
and type-c port supply).

* tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Add type-c port supply on rk3399-sapphire board
  arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64
  arm64: dts: rockchip: add WiFi module support for Firefly-RK3399
  arm64: dts: rockchip: remove dvs2 pinctrl from pmic on rk3399-sapphire
  arm64: dts: rockchip: Fix VCC5V0_HOST_EN on rk3399-sapphire
  arm64: dts: rockchip: re-order vcc_sys on rk3399-sapphire
  arm64: dts: rockchip: add missing vop properties for px30
  arm64: dts: rockchip: Add idle-states to device tree for rk3399
  arm64: dts: rockchip: add sdmmc UHS support for roc-rk3328-cc
  arm64: dts: rockchip: add GRF GPIO controller to rk3328
  arm64: dts: rockchip: add io-domain to roc-rk3328-cc
  arm64: dts: rockchip: add PX30 evaluation board devicetree
  arm64: dts: rockchip: add core dtsi file for PX30 SoCs
  dt-bindings: rockchip: grf: add grf and pmugrf description for px30
  arm64: dts: rockchip: add support for ROC-RK3399-PC board
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 89cb3a4c 78f26da3
......@@ -59,6 +59,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
- Firefly ROC-RK3399-PC board:
Required root node properties:
- compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
- ChipSPARK PopMetal-RK3288 board:
Required root node properties:
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
......@@ -168,6 +172,10 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
- Rockchip PX30 Evaluation board:
Required root node properties:
- compatible = "rockchip,px30-evb", "rockchip,px30";
- Rockchip RV1108 Evaluation board
Required root node properties:
- compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
......
......@@ -13,6 +13,7 @@ On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
Required Properties:
- compatible: GRF should be one of the following:
- "rockchip,px30-grf", "syscon": for px30
- "rockchip,rk3036-grf", "syscon": for rk3036
- "rockchip,rk3066-grf", "syscon": for rk3066
- "rockchip,rk3188-grf", "syscon": for rk3188
......@@ -23,6 +24,7 @@ Required Properties:
- "rockchip,rk3399-grf", "syscon": for rk3399
- "rockchip,rv1108-grf", "syscon": for rv1108
- compatible: PMUGRF should be one of the following:
- "rockchip,px30-pmugrf", "syscon": for px30
- "rockchip,rk3368-pmugrf", "syscon": for rk3368
- "rockchip,rk3399-pmugrf", "syscon": for rk3399
- compatible: SGRF should be one of the following
......
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
......@@ -14,5 +15,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include "px30.dtsi"
/ {
model = "Rockchip PX30 EVB";
compatible = "rockchip,px30-evb", "rockchip,px30";
chosen {
stdout-path = "serial2:1500000n8";
};
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 2>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
esc-key {
label = "esc";
linux,code = <KEY_ESC>;
press-threshold-microvolt = <1310000>;
};
home-key {
label = "home";
linux,code = <KEY_HOME>;
press-threshold-microvolt = <624000>;
};
menu-key {
label = "menu";
linux,code = <KEY_MENU>;
press-threshold-microvolt = <987000>;
};
vol-down-key {
label = "volume down";
linux,code = <KEY_VOLUMEDOWN>;
press-threshold-microvolt = <300000>;
};
vol-up-key {
label = "volume up";
linux,code = <KEY_VOLUMEUP>;
press-threshold-microvolt = <17000>;
};
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 25000 0>;
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
/*
* On the module itself this is one of these (depending
* on the actual card populated):
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
*/
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
};
vcc_phy: vcc-phy-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_phy";
regulator-always-on;
regulator-boot-on;
};
vcc5v0_sys: vccsys {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
&display_subsystem {
status = "okay";
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
non-removable;
status = "okay";
};
&gmac {
clock_in_out = "output";
phy-supply = <&vcc_phy>;
snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 50000 50000>;
status = "okay";
};
&i2c0 {
status = "okay";
};
&i2s1_2ch {
status = "okay";
};
&io_domains {
status = "okay";
};
&pinctrl {
headphone {
hp_det: hp-det {
rockchip,pins =
<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
pmic {
pmic_int: pmic_int {
rockchip,pins =
<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
};
soc_slppin_gpio: soc_slppin_gpio {
rockchip,pins =
<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
};
soc_slppin_slp: soc_slppin_slp {
rockchip,pins =
<0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
};
soc_slppin_rst: soc_slppin_rst {
rockchip,pins =
<0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins =
<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
status = "okay";
};
&pwm1 {
status = "okay";
};
&saradc {
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <800>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdio {
bus-width = <4>;
cap-sd-highspeed;
keep-power-in-suspend;
non-removable;
mmc-pwrseq = <&sdio_pwrseq>;
sd-uhs-sdr104;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer &uart1_cts>;
status = "okay";
};
&uart2 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
*/
#include <dt-bindings/clock/px30-cru.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/power/px30-power.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
/ {
compatible = "rockchip,px30";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
ethernet0 = &gmac;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
serial5 = &uart5;
spi0 = &spi0;
spi1 = &spi1;
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a35", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
dynamic-power-coefficient = <90>;
operating-points-v2 = <&cpu0_opp_table>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a35", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
dynamic-power-coefficient = <90>;
operating-points-v2 = <&cpu0_opp_table>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a35", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
dynamic-power-coefficient = <90>;
operating-points-v2 = <&cpu0_opp_table>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a35", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
clocks = <&cru ARMCLK>;
#cooling-cells = <2>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
dynamic-power-coefficient = <90>;
operating-points-v2 = <&cpu0_opp_table>;
};
idle-states {
entry-method = "psci";
CPU_SLEEP: cpu-sleep {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x0010000>;
entry-latency-us = <120>;
exit-latency-us = <250>;
min-residency-us = <900>;
};
CLUSTER_SLEEP: cluster-sleep {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x1010000>;
entry-latency-us = <400>;
exit-latency-us = <500>;
min-residency-us = <2000>;
};
};
};
cpu0_opp_table: cpu0-opp-table {
compatible = "operating-points-v2";
opp-shared;
opp-408000000 {
opp-hz = /bits/ 64 <408000000>;
opp-microvolt = <950000 950000 1350000>;
clock-latency-ns = <40000>;
opp-suspend;
};
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <950000 950000 1350000>;
clock-latency-ns = <40000>;
};
opp-816000000 {
opp-hz = /bits/ 64 <816000000>;
opp-microvolt = <1050000 1050000 1350000>;
clock-latency-ns = <40000>;
};
opp-1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1175000 1175000 1350000>;
clock-latency-ns = <40000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1300000 1300000 1350000>;
clock-latency-ns = <40000>;
};
opp-1296000000 {
opp-hz = /bits/ 64 <1296000000>;
opp-microvolt = <1350000 1350000 1350000>;
clock-latency-ns = <40000>;
};
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
display_subsystem: display-subsystem {
compatible = "rockchip,display-subsystem";
ports = <&vopb_out>, <&vopl_out>;
status = "disabled";
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
gmac_clkin: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <50000000>;
clock-output-names = "gmac_clkin";
#clock-cells = <0>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
xin24m: xin24m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "xin24m";
};
xin32k: xin32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
};
pmu: power-management@ff000000 {
compatible = "rockchip,px30-pmu", "syscon", "simple-mfd";
reg = <0x0 0xff000000 0x0 0x1000>;
power: power-controller {
compatible = "rockchip,px30-power-controller";
#power-domain-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
/* These power domains are grouped by VD_LOGIC */
pd_usb@PX30_PD_USB {
reg = <PX30_PD_USB>;
clocks = <&cru HCLK_HOST>,
<&cru HCLK_OTG>,
<&cru SCLK_OTG_ADP>;
pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
};
pd_sdcard@PX30_PD_SDCARD {
reg = <PX30_PD_SDCARD>;
clocks = <&cru HCLK_SDMMC>,
<&cru SCLK_SDMMC>;
pm_qos = <&qos_sdmmc>;
};
pd_gmac@PX30_PD_GMAC {
reg = <PX30_PD_GMAC>;
clocks = <&cru ACLK_GMAC>,
<&cru PCLK_GMAC>,
<&cru SCLK_MAC_REF>,
<&cru SCLK_GMAC_RX_TX>;
pm_qos = <&qos_gmac>;
};
pd_mmc_nand@PX30_PD_MMC_NAND {
reg = <PX30_PD_MMC_NAND>;
clocks = <&cru HCLK_NANDC>,
<&cru HCLK_EMMC>,
<&cru HCLK_SDIO>,
<&cru HCLK_SFC>,
<&cru SCLK_EMMC>,
<&cru SCLK_NANDC>,
<&cru SCLK_SDIO>,
<&cru SCLK_SFC>;
pm_qos = <&qos_emmc>, <&qos_nand>,
<&qos_sdio>, <&qos_sfc>;
};
pd_vpu@PX30_PD_VPU {
reg = <PX30_PD_VPU>;
clocks = <&cru ACLK_VPU>,
<&cru HCLK_VPU>,
<&cru SCLK_CORE_VPU>;
pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
};
pd_vo@PX30_PD_VO {
reg = <PX30_PD_VO>;
clocks = <&cru ACLK_RGA>,
<&cru ACLK_VOPB>,
<&cru ACLK_VOPL>,
<&cru DCLK_VOPB>,
<&cru DCLK_VOPL>,
<&cru HCLK_RGA>,
<&cru HCLK_VOPB>,
<&cru HCLK_VOPL>,
<&cru PCLK_MIPI_DSI>,
<&cru SCLK_RGA_CORE>,
<&cru SCLK_VOPB_PWM>;
pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
<&qos_vop_m0>, <&qos_vop_m1>;
};
pd_vi@PX30_PD_VI {
reg = <PX30_PD_VI>;
clocks = <&cru ACLK_CIF>,
<&cru ACLK_ISP>,
<&cru HCLK_CIF>,
<&cru HCLK_ISP>,
<&cru SCLK_ISP>;
pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
<&qos_isp_wr>, <&qos_isp_m1>,
<&qos_vip>;
};
pd_gpu@PX30_PD_GPU {
reg = <PX30_PD_GPU>;
clocks = <&cru SCLK_GPU>;
pm_qos = <&qos_gpu>;
};
};
};
pmugrf: syscon@ff010000 {
compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xff010000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
pmu_io_domains: io-domains {
compatible = "rockchip,px30-pmu-io-voltage-domain";
status = "disabled";
};
reboot-mode {
compatible = "syscon-reboot-mode";
offset = <0x200>;
mode-bootloader = <BOOT_BL_DOWNLOAD>;
mode-fastboot = <BOOT_FASTBOOT>;
mode-loader = <BOOT_BL_DOWNLOAD>;
mode-normal = <BOOT_NORMAL>;
mode-recovery = <BOOT_RECOVERY>;
};
};
uart0: serial@ff030000 {
compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
reg = <0x0 0xff030000 0x0 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac 0>, <&dmac 1>;
dma-names = "tx", "rx";
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
status = "disabled";
};
i2s1_2ch: i2s@ff070000 {
compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
reg = <0x0 0xff070000 0x0 0x1000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
clock-names = "i2s_clk", "i2s_hclk";
dmas = <&dmac 18>, <&dmac 19>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&i2s1_2ch_sclk &i2s1_2ch_lrck
&i2s1_2ch_sdi &i2s1_2ch_sdo>;
#sound-dai-cells = <0>;
status = "disabled";
};
i2s2_2ch: i2s@ff080000 {
compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
reg = <0x0 0xff080000 0x0 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
clock-names = "i2s_clk", "i2s_hclk";
dmas = <&dmac 20>, <&dmac 21>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&i2s2_2ch_sclk &i2s2_2ch_lrck
&i2s2_2ch_sdi &i2s2_2ch_sdo>;
#sound-dai-cells = <0>;
status = "disabled";
};
gic: interrupt-controller@ff131000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x0 0xff131000 0 0x1000>,
<0x0 0xff132000 0 0x2000>,
<0x0 0xff134000 0 0x2000>,
<0x0 0xff136000 0 0x2000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
grf: syscon@ff140000 {
compatible = "rockchip,px30-grf", "syscon", "simple-mfd";
reg = <0x0 0xff140000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
io_domains: io-domains {
compatible = "rockchip,px30-io-voltage-domain";
status = "disabled";
};
};
uart1: serial@ff158000 {
compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
reg = <0x0 0xff158000 0x0 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac 2>, <&dmac 3>;
dma-names = "tx", "rx";
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
status = "disabled";
};
uart2: serial@ff160000 {
compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
reg = <0x0 0xff160000 0x0 0x100>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac 4>, <&dmac 5>;
dma-names = "tx", "rx";
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&uart2m0_xfer>;
status = "disabled";
};
uart3: serial@ff168000 {
compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
reg = <0x0 0xff168000 0x0 0x100>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac 6>, <&dmac 7>;
dma-names = "tx", "rx";
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&uart3m1_xfer &uart3m1_cts &uart3m1_rts>;
status = "disabled";
};
uart4: serial@ff170000 {
compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
reg = <0x0 0xff170000 0x0 0x100>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac 8>, <&dmac 9>;
dma-names = "tx", "rx";
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>;
status = "disabled";
};
uart5: serial@ff178000 {
compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
reg = <0x0 0xff178000 0x0 0x100>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
clock-names = "baudclk", "apb_pclk";
dmas = <&dmac 10>, <&dmac 11>;
dma-names = "tx", "rx";
reg-shift = <2>;
reg-io-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&uart5_xfer &uart5_cts &uart5_rts>;
status = "disabled";
};
i2c0: i2c@ff180000 {
compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xff180000 0x0 0x1000>;
clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_xfer>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@ff190000 {
compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xff190000 0x0 0x1000>;
clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_xfer>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@ff1a0000 {
compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xff1a0000 0x0 0x1000>;
clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_xfer>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@ff1b0000 {
compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
reg = <0x0 0xff1b0000 0x0 0x1000>;
clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
clock-names = "i2c", "pclk";
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&i2c3_xfer>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi0: spi@ff1d0000 {
compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
reg = <0x0 0xff1d0000 0x0 0x1000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
clock-names = "spiclk", "apb_pclk";
dmas = <&dmac 12>, <&dmac 13>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@ff1d8000 {
compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
reg = <0x0 0xff1d8000 0x0 0x1000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
clock-names = "spiclk", "apb_pclk";
dmas = <&dmac 14>, <&dmac 15>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
wdt: watchdog@ff1e0000 {
compatible = "snps,dw-wdt";
reg = <0x0 0xff1e0000 0x0 0x100>;
clocks = <&cru PCLK_WDT_NS>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
pwm0: pwm@ff200000 {
compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xff200000 0x0 0x10>;
clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm1: pwm@ff200010 {
compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xff200010 0x0 0x10>;
clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm1_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm2: pwm@ff200020 {
compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xff200020 0x0 0x10>;
clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm3: pwm@ff200030 {
compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xff200030 0x0 0x10>;
clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm3_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm4: pwm@ff208000 {
compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xff208000 0x0 0x10>;
clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm4_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm5: pwm@ff208010 {
compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xff208010 0x0 0x10>;
clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm5_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm6: pwm@ff208020 {
compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xff208020 0x0 0x10>;
clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm6_pin>;
#pwm-cells = <3>;
status = "disabled";
};
pwm7: pwm@ff208030 {
compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
reg = <0x0 0xff208030 0x0 0x10>;
clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
pinctrl-0 = <&pwm7_pin>;
#pwm-cells = <3>;
status = "disabled";
};
rktimer: timer@ff210000 {
compatible = "rockchip,px30-timer", "rockchip,rk3288-timer";
reg = <0x0 0xff210000 0x0 0x1000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
clock-names = "pclk", "timer";
};
amba {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
dmac: dmac@ff240000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff240000 0x0 0x4000>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_DMAC>;
clock-names = "apb_pclk";
#dma-cells = <1>;
};
};
saradc: saradc@ff288000 {
compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
reg = <0x0 0xff288000 0x0 0x100>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
#io-channel-cells = <1>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
resets = <&cru SRST_SARADC_P>;
reset-names = "saradc-apb";
status = "disabled";
};
cru: clock-controller@ff2b0000 {
compatible = "rockchip,px30-cru";
reg = <0x0 0xff2b0000 0x0 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
assigned-clocks = <&cru PLL_NPLL>;
assigned-clock-rates = <1188000000>;
};
pmucru: clock-controller@ff2bc000 {
compatible = "rockchip,px30-pmucru";
reg = <0x0 0xff2bc000 0x0 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
assigned-clocks =
<&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>,
<&pmucru SCLK_WIFI_PMU>, <&cru ARMCLK>,
<&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
<&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
<&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
assigned-clock-rates =
<1200000000>, <100000000>,
<26000000>, <600000000>,
<200000000>, <200000000>,
<150000000>, <150000000>,
<100000000>, <200000000>;
};
usb_host0_ehci: usb@ff340000 {
compatible = "generic-ehci";
reg = <0x0 0xff340000 0x0 0x10000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
clock-names = "usbhost";
power-domains = <&power PX30_PD_USB>;
status = "disabled";
};
usb_host0_ohci: usb@ff350000 {
compatible = "generic-ohci";
reg = <0x0 0xff350000 0x0 0x10000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_HOST>;
clock-names = "usbhost";
power-domains = <&power PX30_PD_USB>;
status = "disabled";
};
gmac: ethernet@ff360000 {
compatible = "rockchip,px30-gmac";
reg = <0x0 0xff360000 0x0 0x10000>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&cru SCLK_GMAC>, <&cru SCLK_GMAC_RX_TX>,
<&cru SCLK_GMAC_RX_TX>, <&cru SCLK_MAC_REF>,
<&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
<&cru PCLK_GMAC>, <&cru SCLK_GMAC_RMII>;
clock-names = "stmmaceth", "mac_clk_rx",
"mac_clk_tx", "clk_mac_ref",
"clk_mac_refout", "aclk_mac",
"pclk_mac", "clk_mac_speed";
rockchip,grf = <&grf>;
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
power-domains = <&power PX30_PD_GMAC>;
resets = <&cru SRST_GMAC_A>;
reset-names = "stmmaceth";
status = "disabled";
};
sdmmc: dwmmc@ff370000 {
compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff370000 0x0 0x4000>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
power-domains = <&power PX30_PD_SDCARD>;
status = "disabled";
};
sdio: dwmmc@ff380000 {
compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff380000 0x0 0x4000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>;
power-domains = <&power PX30_PD_MMC_NAND>;
status = "disabled";
};
emmc: dwmmc@ff390000 {
compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff390000 0x0 0x4000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
fifo-depth = <0x100>;
max-frequency = <150000000>;
power-domains = <&power PX30_PD_MMC_NAND>;
status = "disabled";
};
vopb: vop@ff460000 {
compatible = "rockchip,px30-vop-big";
reg = <0x0 0xff460000 0x0 0xefc>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOPB>, <&cru DCLK_VOPB>,
<&cru HCLK_VOPB>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
resets = <&cru SRST_VOPB_A>, <&cru SRST_VOPB_H>, <&cru SRST_VOPB>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
power-domains = <&power PX30_PD_VO>;
rockchip,grf = <&grf>;
status = "disabled";
vopb_out: port {
#address-cells = <1>;
#size-cells = <0>;
};
};
vopb_mmu: iommu@ff460f00 {
compatible = "rockchip,iommu";
reg = <0x0 0xff460f00 0x0 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopb_mmu";
clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
clock-names = "aclk", "hclk";
power-domains = <&power PX30_PD_VO>;
#iommu-cells = <0>;
status = "disabled";
};
vopl: vop@ff470000 {
compatible = "rockchip,px30-vop-lit";
reg = <0x0 0xff470000 0x0 0xefc>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOPL>, <&cru DCLK_VOPL>,
<&cru HCLK_VOPL>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
resets = <&cru SRST_VOPL_A>, <&cru SRST_VOPL_H>, <&cru SRST_VOPL>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopl_mmu>;
power-domains = <&power PX30_PD_VO>;
rockchip,grf = <&grf>;
status = "disabled";
vopl_out: port {
#address-cells = <1>;
#size-cells = <0>;
};
};
vopl_mmu: iommu@ff470f00 {
compatible = "rockchip,iommu";
reg = <0x0 0xff470f00 0x0 0x100>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopl_mmu";
clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
clock-names = "aclk", "hclk";
power-domains = <&power PX30_PD_VO>;
#iommu-cells = <0>;
status = "disabled";
};
qos_gmac: qos@ff518000 {
compatible = "syscon";
reg = <0x0 0xff518000 0x0 0x20>;
};
qos_gpu: qos@ff520000 {
compatible = "syscon";
reg = <0x0 0xff520000 0x0 0x20>;
};
qos_sdmmc: qos@ff52c000 {
compatible = "syscon";
reg = <0x0 0xff52c000 0x0 0x20>;
};
qos_emmc: qos@ff538000 {
compatible = "syscon";
reg = <0x0 0xff538000 0x0 0x20>;
};
qos_nand: qos@ff538080 {
compatible = "syscon";
reg = <0x0 0xff538080 0x0 0x20>;
};
qos_sdio: qos@ff538100 {
compatible = "syscon";
reg = <0x0 0xff538100 0x0 0x20>;
};
qos_sfc: qos@ff538180 {
compatible = "syscon";
reg = <0x0 0xff538180 0x0 0x20>;
};
qos_usb_host: qos@ff540000 {
compatible = "syscon";
reg = <0x0 0xff540000 0x0 0x20>;
};
qos_usb_otg: qos@ff540080 {
compatible = "syscon";
reg = <0x0 0xff540080 0x0 0x20>;
};
qos_isp_128: qos@ff548000 {
compatible = "syscon";
reg = <0x0 0xff548000 0x0 0x20>;
};
qos_isp_rd: qos@ff548080 {
compatible = "syscon";
reg = <0x0 0xff548080 0x0 0x20>;
};
qos_isp_wr: qos@ff548100 {
compatible = "syscon";
reg = <0x0 0xff548100 0x0 0x20>;
};
qos_isp_m1: qos@ff548180 {
compatible = "syscon";
reg = <0x0 0xff548180 0x0 0x20>;
};
qos_vip: qos@ff548200 {
compatible = "syscon";
reg = <0x0 0xff548200 0x0 0x20>;
};
qos_rga_rd: qos@ff550000 {
compatible = "syscon";
reg = <0x0 0xff550000 0x0 0x20>;
};
qos_rga_wr: qos@ff550080 {
compatible = "syscon";
reg = <0x0 0xff550080 0x0 0x20>;
};
qos_vop_m0: qos@ff550100 {
compatible = "syscon";
reg = <0x0 0xff550100 0x0 0x20>;
};
qos_vop_m1: qos@ff550180 {
compatible = "syscon";
reg = <0x0 0xff550180 0x0 0x20>;
};
qos_vpu: qos@ff558000 {
compatible = "syscon";
reg = <0x0 0xff558000 0x0 0x20>;
};
qos_vpu_r128: qos@ff558080 {
compatible = "syscon";
reg = <0x0 0xff558080 0x0 0x20>;
};
pinctrl: pinctrl {
compatible = "rockchip,px30-pinctrl";
rockchip,grf = <&grf>;
rockchip,pmu = <&pmugrf>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio0: gpio0@ff040000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff040000 0x0 0x100>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pmucru PCLK_GPIO0_PMU>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio1@ff250000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff250000 0x0 0x100>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio2@ff260000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff260000 0x0 0x100>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio3@ff270000 {
compatible = "rockchip,gpio-bank";
reg = <0x0 0xff270000 0x0 0x100>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pcfg_pull_up: pcfg-pull-up {
bias-pull-up;
};
pcfg_pull_down: pcfg-pull-down {
bias-pull-down;
};
pcfg_pull_none: pcfg-pull-none {
bias-disable;
};
pcfg_pull_none_2ma: pcfg-pull-none-2ma {
bias-disable;
drive-strength = <2>;
};
pcfg_pull_up_2ma: pcfg-pull-up-2ma {
bias-pull-up;
drive-strength = <2>;
};
pcfg_pull_up_4ma: pcfg-pull-up-4ma {
bias-pull-up;
drive-strength = <4>;
};
pcfg_pull_none_4ma: pcfg-pull-none-4ma {
bias-disable;
drive-strength = <4>;
};
pcfg_pull_down_4ma: pcfg-pull-down-4ma {
bias-pull-down;
drive-strength = <4>;
};
pcfg_pull_none_8ma: pcfg-pull-none-8ma {
bias-disable;
drive-strength = <8>;
};
pcfg_pull_up_8ma: pcfg-pull-up-8ma {
bias-pull-up;
drive-strength = <8>;
};
pcfg_pull_none_12ma: pcfg-pull-none-12ma {
bias-disable;
drive-strength = <12>;
};
pcfg_pull_up_12ma: pcfg-pull-up-12ma {
bias-pull-up;
drive-strength = <12>;
};
pcfg_pull_none_smt: pcfg-pull-none-smt {
bias-disable;
input-schmitt-enable;
};
pcfg_output_high: pcfg-output-high {
output-high;
};
pcfg_output_low: pcfg-output-low {
output-low;
};
pcfg_input_high: pcfg-input-high {
bias-pull-up;
input-enable;
};
pcfg_input: pcfg-input {
input-enable;
};
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins =
<0 RK_PB0 1 &pcfg_pull_none_smt>,
<0 RK_PB1 1 &pcfg_pull_none_smt>;
};
};
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins =
<0 RK_PC2 1 &pcfg_pull_none_smt>,
<0 RK_PC3 1 &pcfg_pull_none_smt>;
};
};
i2c2 {
i2c2_xfer: i2c2-xfer {
rockchip,pins =
<2 RK_PB7 2 &pcfg_pull_none_smt>,
<2 RK_PC0 2 &pcfg_pull_none_smt>;
};
};
i2c3 {
i2c3_xfer: i2c3-xfer {
rockchip,pins =
<1 RK_PB4 4 &pcfg_pull_none_smt>,
<1 RK_PB5 4 &pcfg_pull_none_smt>;
};
};
tsadc {
tsadc_otp_gpio: tsadc-otp-gpio {
rockchip,pins =
<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
tsadc_otp_out: tsadc-otp-out {
rockchip,pins =
<0 RK_PA6 1 &pcfg_pull_none>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins =
<0 RK_PB2 1 &pcfg_pull_up>,
<0 RK_PB3 1 &pcfg_pull_up>;
};
uart0_cts: uart0-cts {
rockchip,pins =
<0 RK_PB4 1 &pcfg_pull_none>;
};
uart0_rts: uart0-rts {
rockchip,pins =
<0 RK_PB5 1 &pcfg_pull_none>;
};
uart0_rts_gpio: uart0-rts-gpio {
rockchip,pins =
<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
uart1 {
uart1_xfer: uart1-xfer {
rockchip,pins =
<1 RK_PC1 1 &pcfg_pull_up>,
<1 RK_PC0 1 &pcfg_pull_up>;
};
uart1_cts: uart1-cts {
rockchip,pins =
<1 RK_PC2 1 &pcfg_pull_none>;
};
uart1_rts: uart1-rts {
rockchip,pins =
<1 RK_PC3 1 &pcfg_pull_none>;
};
uart1_rts_gpio: uart1-rts-gpio {
rockchip,pins =
<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
uart2-m0 {
uart2m0_xfer: uart2m0-xfer {
rockchip,pins =
<1 RK_PD2 2 &pcfg_pull_up>,
<1 RK_PD3 2 &pcfg_pull_up>;
};
};
uart2-m1 {
uart2m1_xfer: uart2m1-xfer {
rockchip,pins =
<2 RK_PB4 2 &pcfg_pull_up>,
<2 RK_PB6 2 &pcfg_pull_up>;
};
};
uart3-m0 {
uart3m0_xfer: uart3m0-xfer {
rockchip,pins =
<0 RK_PC0 2 &pcfg_pull_up>,
<0 RK_PC1 2 &pcfg_pull_up>;
};
uart3m0_cts: uart3m0-cts {
rockchip,pins =
<0 RK_PC2 2 &pcfg_pull_none>;
};
uart3m0_rts: uart3m0-rts {
rockchip,pins =
<0 RK_PC3 2 &pcfg_pull_none>;
};
uart3m0_rts_gpio: uart3m0-rts-gpio {
rockchip,pins =
<0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
uart3-m1 {
uart3m1_xfer: uart3m1-xfer {
rockchip,pins =
<1 RK_PB6 2 &pcfg_pull_up>,
<1 RK_PB7 2 &pcfg_pull_up>;
};
uart3m1_cts: uart3m1-cts {
rockchip,pins =
<1 RK_PB4 2 &pcfg_pull_none>;
};
uart3m1_rts: uart3m1-rts {
rockchip,pins =
<1 RK_PB5 2 &pcfg_pull_none>;
};
uart3m1_rts_gpio: uart3m1-rts-gpio {
rockchip,pins =
<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
uart4 {
uart4_xfer: uart4-xfer {
rockchip,pins =
<1 RK_PD4 2 &pcfg_pull_up>,
<1 RK_PD5 2 &pcfg_pull_up>;
};
uart4_cts: uart4-cts {
rockchip,pins =
<1 RK_PD6 2 &pcfg_pull_none>;
};
uart4_rts: uart4-rts {
rockchip,pins =
<1 RK_PD7 2 &pcfg_pull_none>;
};
};
uart5 {
uart5_xfer: uart5-xfer {
rockchip,pins =
<3 RK_PA2 4 &pcfg_pull_up>,
<3 RK_PA1 4 &pcfg_pull_up>;
};
uart5_cts: uart5-cts {
rockchip,pins =
<3 RK_PA3 4 &pcfg_pull_none>;
};
uart5_rts: uart5-rts {
rockchip,pins =
<3 RK_PA5 4 &pcfg_pull_none>;
};
};
spi0 {
spi0_clk: spi0-clk {
rockchip,pins =
<1 RK_PB7 3 &pcfg_pull_up_4ma>;
};
spi0_csn: spi0-csn {
rockchip,pins =
<1 RK_PB6 3 &pcfg_pull_up_4ma>;
};
spi0_miso: spi0-miso {
rockchip,pins =
<1 RK_PB5 3 &pcfg_pull_up_4ma>;
};
spi0_mosi: spi0-mosi {
rockchip,pins =
<1 RK_PB4 3 &pcfg_pull_up_4ma>;
};
spi0_clk_hs: spi0-clk-hs {
rockchip,pins =
<1 RK_PB7 3 &pcfg_pull_up_8ma>;
};
spi0_miso_hs: spi0-miso-hs {
rockchip,pins =
<1 RK_PB5 3 &pcfg_pull_up_8ma>;
};
spi0_mosi_hs: spi0-mosi-hs {
rockchip,pins =
<1 RK_PB4 3 &pcfg_pull_up_8ma>;
};
};
spi1 {
spi1_clk: spi1-clk {
rockchip,pins =
<3 RK_PB7 4 &pcfg_pull_up_4ma>;
};
spi1_csn0: spi1-csn0 {
rockchip,pins =
<3 RK_PB1 4 &pcfg_pull_up_4ma>;
};
spi1_csn1: spi1-csn1 {
rockchip,pins =
<3 RK_PB2 2 &pcfg_pull_up_4ma>;
};
spi1_miso: spi1-miso {
rockchip,pins =
<3 RK_PB6 4 &pcfg_pull_up_4ma>;
};
spi1_mosi: spi1-mosi {
rockchip,pins =
<3 RK_PB4 4 &pcfg_pull_up_4ma>;
};
spi1_clk_hs: spi1-clk-hs {
rockchip,pins =
<3 RK_PB7 4 &pcfg_pull_up_8ma>;
};
spi1_miso_hs: spi1-miso-hs {
rockchip,pins =
<3 RK_PB6 4 &pcfg_pull_up_8ma>;
};
spi1_mosi_hs: spi1-mosi-hs {
rockchip,pins =
<3 RK_PB4 4 &pcfg_pull_up_8ma>;
};
};
pdm {
pdm_clk0m0: pdm-clk0m0 {
rockchip,pins =
<3 RK_PC6 2 &pcfg_pull_none>;
};
pdm_clk0m1: pdm-clk0m1 {
rockchip,pins =
<2 RK_PC6 1 &pcfg_pull_none>;
};
pdm_clk1: pdm-clk1 {
rockchip,pins =
<3 RK_PC7 2 &pcfg_pull_none>;
};
pdm_sdi0m0: pdm-sdi0m0 {
rockchip,pins =
<3 RK_PD3 2 &pcfg_pull_none>;
};
pdm_sdi0m1: pdm-sdi0m1 {
rockchip,pins =
<2 RK_PC5 2 &pcfg_pull_none>;
};
pdm_sdi1: pdm-sdi1 {
rockchip,pins =
<3 RK_PD0 2 &pcfg_pull_none>;
};
pdm_sdi2: pdm-sdi2 {
rockchip,pins =
<3 RK_PD1 2 &pcfg_pull_none>;
};
pdm_sdi3: pdm-sdi3 {
rockchip,pins =
<3 RK_PD2 2 &pcfg_pull_none>;
};
pdm_clk0m0_sleep: pdm-clk0m0-sleep {
rockchip,pins =
<3 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
};
pdm_clk0m_sleep1: pdm-clk0m1-sleep {
rockchip,pins =
<2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
};
pdm_clk1_sleep: pdm-clk1-sleep {
rockchip,pins =
<3 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
};
pdm_sdi0m0_sleep: pdm-sdi0m0-sleep {
rockchip,pins =
<3 RK_PD3 RK_FUNC_GPIO &pcfg_input_high>;
};
pdm_sdi0m1_sleep: pdm-sdi0m1-sleep {
rockchip,pins =
<2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
};
pdm_sdi1_sleep: pdm-sdi1-sleep {
rockchip,pins =
<3 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>;
};
pdm_sdi2_sleep: pdm-sdi2-sleep {
rockchip,pins =
<3 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
};
pdm_sdi3_sleep: pdm-sdi3-sleep {
rockchip,pins =
<3 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>;
};
};
i2s0 {
i2s0_8ch_mclk: i2s0-8ch-mclk {
rockchip,pins =
<3 RK_PC1 2 &pcfg_pull_none>;
};
i2s0_8ch_sclktx: i2s0-8ch-sclktx {
rockchip,pins =
<3 RK_PC3 2 &pcfg_pull_none>;
};
i2s0_8ch_sclkrx: i2s0-8ch-sclkrx {
rockchip,pins =
<3 RK_PB4 2 &pcfg_pull_none>;
};
i2s0_8ch_lrcktx: i2s0-8ch-lrcktx {
rockchip,pins =
<3 RK_PC2 2 &pcfg_pull_none>;
};
i2s0_8ch_lrckrx: i2s0-8ch-lrckrx {
rockchip,pins =
<3 RK_PB5 2 &pcfg_pull_none>;
};
i2s0_8ch_sdo0: i2s0-8ch-sdo0 {
rockchip,pins =
<3 RK_PC4 2 &pcfg_pull_none>;
};
i2s0_8ch_sdo1: i2s0-8ch-sdo1 {
rockchip,pins =
<3 RK_PC0 2 &pcfg_pull_none>;
};
i2s0_8ch_sdo2: i2s0-8ch-sdo2 {
rockchip,pins =
<3 RK_PB7 2 &pcfg_pull_none>;
};
i2s0_8ch_sdo3: i2s0-8ch-sdo3 {
rockchip,pins =
<3 RK_PB6 2 &pcfg_pull_none>;
};
i2s0_8ch_sdi0: i2s0-8ch-sdi0 {
rockchip,pins =
<3 RK_PC5 2 &pcfg_pull_none>;
};
i2s0_8ch_sdi1: i2s0-8ch-sdi1 {
rockchip,pins =
<3 RK_PB3 2 &pcfg_pull_none>;
};
i2s0_8ch_sdi2: i2s0-8ch-sdi2 {
rockchip,pins =
<3 RK_PB1 2 &pcfg_pull_none>;
};
i2s0_8ch_sdi3: i2s0-8ch-sdi3 {
rockchip,pins =
<3 RK_PB0 2 &pcfg_pull_none>;
};
};
i2s1 {
i2s1_2ch_mclk: i2s1-2ch-mclk {
rockchip,pins =
<2 RK_PC3 1 &pcfg_pull_none>;
};
i2s1_2ch_sclk: i2s1-2ch-sclk {
rockchip,pins =
<2 RK_PC2 1 &pcfg_pull_none>;
};
i2s1_2ch_lrck: i2s1-2ch-lrck {
rockchip,pins =
<2 RK_PC1 1 &pcfg_pull_none>;
};
i2s1_2ch_sdi: i2s1-2ch-sdi {
rockchip,pins =
<2 RK_PC5 1 &pcfg_pull_none>;
};
i2s1_2ch_sdo: i2s1-2ch-sdo {
rockchip,pins =
<2 RK_PC4 1 &pcfg_pull_none>;
};
};
i2s2 {
i2s2_2ch_mclk: i2s2-2ch-mclk {
rockchip,pins =
<3 RK_PA1 2 &pcfg_pull_none>;
};
i2s2_2ch_sclk: i2s2-2ch-sclk {
rockchip,pins =
<3 RK_PA2 2 &pcfg_pull_none>;
};
i2s2_2ch_lrck: i2s2-2ch-lrck {
rockchip,pins =
<3 RK_PA3 2 &pcfg_pull_none>;
};
i2s2_2ch_sdi: i2s2-2ch-sdi {
rockchip,pins =
<3 RK_PA5 2 &pcfg_pull_none>;
};
i2s2_2ch_sdo: i2s2-2ch-sdo {
rockchip,pins =
<3 RK_PA7 2 &pcfg_pull_none>;
};
};
sdmmc {
sdmmc_clk: sdmmc-clk {
rockchip,pins =
<1 RK_PD6 1 &pcfg_pull_none_8ma>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins =
<1 RK_PD7 1 &pcfg_pull_up_8ma>;
};
sdmmc_det: sdmmc-det {
rockchip,pins =
<0 RK_PA3 1 &pcfg_pull_up_8ma>;
};
sdmmc_bus1: sdmmc-bus1 {
rockchip,pins =
<1 RK_PD2 1 &pcfg_pull_up_8ma>;
};
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins =
<1 RK_PD2 1 &pcfg_pull_up_8ma>,
<1 RK_PD3 1 &pcfg_pull_up_8ma>,
<1 RK_PD4 1 &pcfg_pull_up_8ma>,
<1 RK_PD5 1 &pcfg_pull_up_8ma>;
};
sdmmc_gpio: sdmmc-gpio {
rockchip,pins =
<1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
<1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
<1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
<1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
<1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
};
};
sdio {
sdio_clk: sdio-clk {
rockchip,pins =
<1 RK_PC5 1 &pcfg_pull_none>;
};
sdio_cmd: sdio-cmd {
rockchip,pins =
<1 RK_PC4 1 &pcfg_pull_up>;
};
sdio_bus4: sdio-bus4 {
rockchip,pins =
<1 RK_PC6 1 &pcfg_pull_up>,
<1 RK_PC7 1 &pcfg_pull_up>,
<1 RK_PD0 1 &pcfg_pull_up>,
<1 RK_PD1 1 &pcfg_pull_up>;
};
sdio_gpio: sdio-gpio {
rockchip,pins =
<1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>,
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
emmc {
emmc_clk: emmc-clk {
rockchip,pins =
<1 RK_PB1 2 &pcfg_pull_none_8ma>;
};
emmc_cmd: emmc-cmd {
rockchip,pins =
<1 RK_PB2 2 &pcfg_pull_up_8ma>;
};
emmc_pwren: emmc-pwren {
rockchip,pins =
<1 RK_PB0 2 &pcfg_pull_none>;
};
emmc_rstnout: emmc-rstnout {
rockchip,pins =
<1 RK_PB3 2 &pcfg_pull_none>;
};
emmc_bus1: emmc-bus1 {
rockchip,pins =
<1 RK_PA0 2 &pcfg_pull_up_8ma>;
};
emmc_bus4: emmc-bus4 {
rockchip,pins =
<1 RK_PA0 2 &pcfg_pull_up_8ma>,
<1 RK_PA1 2 &pcfg_pull_up_8ma>,
<1 RK_PA2 2 &pcfg_pull_up_8ma>,
<1 RK_PA3 2 &pcfg_pull_up_8ma>;
};
emmc_bus8: emmc-bus8 {
rockchip,pins =
<1 RK_PA0 2 &pcfg_pull_up_8ma>,
<1 RK_PA1 2 &pcfg_pull_up_8ma>,
<1 RK_PA2 2 &pcfg_pull_up_8ma>,
<1 RK_PA3 2 &pcfg_pull_up_8ma>,
<1 RK_PA4 2 &pcfg_pull_up_8ma>,
<1 RK_PA5 2 &pcfg_pull_up_8ma>,
<1 RK_PA6 2 &pcfg_pull_up_8ma>,
<1 RK_PA7 2 &pcfg_pull_up_8ma>;
};
};
flash {
flash_cs0: flash-cs0 {
rockchip,pins =
<1 RK_PB0 1 &pcfg_pull_none>;
};
flash_rdy: flash-rdy {
rockchip,pins =
<1 RK_PB1 1 &pcfg_pull_none>;
};
flash_dqs: flash-dqs {
rockchip,pins =
<1 RK_PB2 1 &pcfg_pull_none>;
};
flash_ale: flash-ale {
rockchip,pins =
<1 RK_PB3 1 &pcfg_pull_none>;
};
flash_cle: flash-cle {
rockchip,pins =
<1 RK_PB4 1 &pcfg_pull_none>;
};
flash_wrn: flash-wrn {
rockchip,pins =
<1 RK_PB5 1 &pcfg_pull_none>;
};
flash_csl: flash-csl {
rockchip,pins =
<1 RK_PB6 1 &pcfg_pull_none>;
};
flash_rdn: flash-rdn {
rockchip,pins =
<1 RK_PB7 1 &pcfg_pull_none>;
};
flash_bus8: flash-bus8 {
rockchip,pins =
<1 RK_PA0 1 &pcfg_pull_up_12ma>,
<1 RK_PA1 1 &pcfg_pull_up_12ma>,
<1 RK_PA2 1 &pcfg_pull_up_12ma>,
<1 RK_PA3 1 &pcfg_pull_up_12ma>,
<1 RK_PA4 1 &pcfg_pull_up_12ma>,
<1 RK_PA5 1 &pcfg_pull_up_12ma>,
<1 RK_PA6 1 &pcfg_pull_up_12ma>,
<1 RK_PA7 1 &pcfg_pull_up_12ma>;
};
};
lcdc {
lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin {
rockchip,pins =
<3 RK_PA0 1 &pcfg_pull_none_12ma>;
};
lcdc_rgb_m0_hsync_pin: lcdc-rgb-m0-hsync-pin {
rockchip,pins =
<3 RK_PA1 1 &pcfg_pull_none_12ma>;
};
lcdc_rgb_m0_vsync_pin: lcdc-rgb-m0-vsync-pin {
rockchip,pins =
<3 RK_PA2 1 &pcfg_pull_none_12ma>;
};
lcdc_rgb_m0_den_pin: lcdc-rgb-m0-den-pin {
rockchip,pins =
<3 RK_PA3 1 &pcfg_pull_none_12ma>;
};
lcdc_rgb888_m0_data_pins: lcdc-rgb888-m0-data-pins {
rockchip,pins =
<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
<3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
<3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
<3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
<3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
<3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
<3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
<3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
};
lcdc_rgb666_m0_data_pins: lcdc-rgb666-m0-data-pins {
rockchip,pins =
<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
<3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
};
lcdc_rgb565_m0_data_pins: lcdc-rgb565-m0-data-pins {
rockchip,pins =
<3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
<3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
<3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
<3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
<3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
<3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
<3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
<3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
};
lcdc_rgb888_m1_data_pins: lcdc-rgb888-m1-data-pins {
rockchip,pins =
<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
<3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
<3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
<3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
<3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
<3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
<3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
<3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
};
lcdc_rgb666_m1_data_pins: lcdc-rgb666-m1-data-pins {
rockchip,pins =
<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
<3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
<3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
<3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
};
lcdc_rgb565_m1_data_pins: lcdc-rgb565-m1-data-pins {
rockchip,pins =
<3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
<3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
<3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
<3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
<3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
<3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
<3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
<3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
<3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
};
};
pwm0 {
pwm0_pin: pwm0-pin {
rockchip,pins =
<0 RK_PB7 1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_pin: pwm1-pin {
rockchip,pins =
<0 RK_PC0 1 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_pin: pwm2-pin {
rockchip,pins =
<2 RK_PB5 1 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_pin: pwm3-pin {
rockchip,pins =
<0 RK_PC1 1 &pcfg_pull_none>;
};
};
pwm4 {
pwm4_pin: pwm4-pin {
rockchip,pins =
<3 RK_PC2 3 &pcfg_pull_none>;
};
};
pwm5 {
pwm5_pin: pwm5-pin {
rockchip,pins =
<3 RK_PC3 3 &pcfg_pull_none>;
};
};
pwm6 {
pwm6_pin: pwm6-pin {
rockchip,pins =
<3 RK_PC4 3 &pcfg_pull_none>;
};
};
pwm7 {
pwm7_pin: pwm7-pin {
rockchip,pins =
<3 RK_PC5 3 &pcfg_pull_none>;
};
};
gmac {
rmii_pins: rmii-pins {
rockchip,pins =
<2 RK_PA0 2 &pcfg_pull_none_12ma>, /* mac_txen */
<2 RK_PA1 2 &pcfg_pull_none_12ma>, /* mac_txd1 */
<2 RK_PA2 2 &pcfg_pull_none_12ma>, /* mac_txd0 */
<2 RK_PA3 2 &pcfg_pull_none>, /* mac_rxd0 */
<2 RK_PA4 2 &pcfg_pull_none>, /* mac_rxd1 */
<2 RK_PA5 2 &pcfg_pull_none>, /* mac_rxer */
<2 RK_PA6 2 &pcfg_pull_none>, /* mac_rxdv */
<2 RK_PA7 2 &pcfg_pull_none>, /* mac_mdio */
<2 RK_PB1 2 &pcfg_pull_none>; /* mac_mdc */
};
mac_refclk_12ma: mac-refclk-12ma {
rockchip,pins =
<2 RK_PB2 2 &pcfg_pull_none_12ma>;
};
mac_refclk: mac-refclk {
rockchip,pins =
<2 RK_PB2 2 &pcfg_pull_none>;
};
};
cif-m0 {
cif_clkout_m0: cif-clkout-m0 {
rockchip,pins =
<2 RK_PB3 1 &pcfg_pull_none>;
};
dvp_d2d9_m0: dvp-d2d9-m0 {
rockchip,pins =
<2 RK_PA0 1 &pcfg_pull_none>, /* cif_data2 */
<2 RK_PA1 1 &pcfg_pull_none>, /* cif_data3 */
<2 RK_PA2 1 &pcfg_pull_none>, /* cif_data4 */
<2 RK_PA3 1 &pcfg_pull_none>, /* cif_data5 */
<2 RK_PA4 1 &pcfg_pull_none>, /* cif_data6 */
<2 RK_PA5 1 &pcfg_pull_none>, /* cif_data7 */
<2 RK_PA6 1 &pcfg_pull_none>, /* cif_data8 */
<2 RK_PA7 1 &pcfg_pull_none>, /* cif_data9 */
<2 RK_PB0 1 &pcfg_pull_none>, /* cif_sync */
<2 RK_PB1 1 &pcfg_pull_none>, /* cif_href */
<2 RK_PB2 1 &pcfg_pull_none>, /* cif_clkin */
<2 RK_PB3 1 &pcfg_pull_none>; /* cif_clkout */
};
dvp_d0d1_m0: dvp-d0d1-m0 {
rockchip,pins =
<2 RK_PB4 1 &pcfg_pull_none>, /* cif_data0 */
<2 RK_PB6 1 &pcfg_pull_none>; /* cif_data1 */
};
dvp_d10d11_m0:d10-d11-m0 {
rockchip,pins =
<2 RK_PB7 1 &pcfg_pull_none>, /* cif_data10 */
<2 RK_PC0 1 &pcfg_pull_none>; /* cif_data11 */
};
};
cif-m1 {
cif_clkout_m1: cif-clkout-m1 {
rockchip,pins =
<3 RK_PD0 3 &pcfg_pull_none>;
};
dvp_d2d9_m1: dvp-d2d9-m1 {
rockchip,pins =
<3 RK_PA3 3 &pcfg_pull_none>, /* cif_data2 */
<3 RK_PA5 3 &pcfg_pull_none>, /* cif_data3 */
<3 RK_PA7 3 &pcfg_pull_none>, /* cif_data4 */
<3 RK_PB0 3 &pcfg_pull_none>, /* cif_data5 */
<3 RK_PB1 3 &pcfg_pull_none>, /* cif_data6 */
<3 RK_PB4 3 &pcfg_pull_none>, /* cif_data7 */
<3 RK_PB6 3 &pcfg_pull_none>, /* cif_data8 */
<3 RK_PB7 3 &pcfg_pull_none>, /* cif_data9 */
<3 RK_PD1 3 &pcfg_pull_none>, /* cif_sync */
<3 RK_PD2 3 &pcfg_pull_none>, /* cif_href */
<3 RK_PD3 3 &pcfg_pull_none>, /* cif_clkin */
<3 RK_PD0 3 &pcfg_pull_none>; /* cif_clkout */
};
dvp_d0d1_m1: dvp-d0d1-m1 {
rockchip,pins =
<3 RK_PA1 3 &pcfg_pull_none>, /* cif_data0 */
<3 RK_PA2 3 &pcfg_pull_none>; /* cif_data1 */
};
dvp_d10d11_m1:d10-d11-m1 {
rockchip,pins =
<3 RK_PC6 3 &pcfg_pull_none>, /* cif_data10 */
<3 RK_PC7 3 &pcfg_pull_none>; /* cif_data11 */
};
};
isp {
isp_prelight: isp-prelight {
rockchip,pins =
<3 RK_PD1 4 &pcfg_pull_none>;
};
};
};
};
......@@ -41,6 +41,19 @@ vcc_sd: sdmmc-regulator {
vin-supply = <&vcc_io>;
};
vcc_sdio: sdmmcio-regulator {
compatible = "regulator-gpio";
gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
states = <1800000 0x1
3300000 0x0>;
regulator-name = "vcc_sdio";
regulator-type = "voltage";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
vin-supply = <&vcc_sys>;
};
vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
compatible = "regulator-fixed";
enable-active-high;
......@@ -208,6 +221,18 @@ regulator-state-mem {
};
};
&io_domains {
status = "okay";
vccio1-supply = <&vcc_io>;
vccio2-supply = <&vcc18_emmc>;
vccio3-supply = <&vcc_sdio>;
vccio4-supply = <&vcc_18>;
vccio5-supply = <&vcc_io>;
vccio6-supply = <&vcc_io>;
pmuio-supply = <&vcc_io>;
};
&pinctrl {
pmic {
pmic_int_l: pmic-int-l {
......@@ -230,7 +255,12 @@ &sdmmc {
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
......
......@@ -46,7 +46,7 @@ vcc_host_5v: vcc-host-5v-regulator {
vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb20_host_drv>;
regulator-name = "vcc_host1_5v";
......@@ -238,7 +238,7 @@ pmic_int_l: pmic-int-l {
usb2 {
usb20_host_drv: usb20-host-drv {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
......
......@@ -249,6 +249,12 @@ io_domains: io-domains {
status = "disabled";
};
grf_gpio: grf-gpio {
compatible = "rockchip,rk3328-grf-gpio";
gpio-controller;
#gpio-cells = <2>;
};
power: power-controller {
compatible = "rockchip,rk3328-power-controller";
#power-domain-cells = <1>;
......@@ -274,7 +280,6 @@ reboot-mode {
mode-bootloader = <BOOT_FASTBOOT>;
mode-loader = <BOOT_BL_DOWNLOAD>;
};
};
uart0: serial@ff110000 {
......
......@@ -622,6 +622,12 @@ vcc5v0_host_en: vcc5v0-host-en {
};
};
wifi {
wifi_host_wake_l: wifi-host-wake-l {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
work_led_gpio: work_led-gpio {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
......@@ -646,6 +652,36 @@ &saradc {
status = "okay";
};
&sdio0 {
/* WiFi & BT combo module Ampak AP6356S */
bus-width = <4>;
cap-sdio-irq;
cap-sd-highspeed;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
sd-uhs-sdr104;
/* Power supply */
vqmmc-supply = &vcc1v8_s3; /* IO line */
vmmc-supply = &vcc_sdio; /* card's power */
status = "okay";
brcmf: wifi@1 {
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
interrupt-names = "host-wake";
brcm,drive-strength = <5>;
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_l>;
};
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
......
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
*/
/dts-v1/;
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
/ {
model = "Firefly ROC-RK3399-PC Board";
compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
chosen {
stdout-path = "serial2:1500000n8";
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm0 0 25000 0>;
};
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "clkin_gmac";
#clock-cells = <0>;
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk808 1>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable_h>;
/*
* On the module itself this is one of these (depending
* on the actual card populated):
* - SDIO_RESET_L_WL_REG_ON
* - PDN (power down when low)
*/
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
vcc_vbus_typec0: vcc-vbus-typec0 {
compatible = "regulator-fixed";
regulator-name = "vcc_vbus_typec0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
/*
* should be placed inside mp8859, but not until mp8859 has
* its own dt-binding.
*/
vcc12v_sys: mp8859-dcdc1 {
compatible = "regulator-fixed";
regulator-name = "vcc12v_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
vin-supply = <&vcc_vbus_typec0>;
};
/* switched by pmic_sleep */
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_1v8>;
};
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc12v_sys>;
};
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
regulator-name = "vcc5v0_host";
regulator-always-on;
vin-supply = <&vcc_sys>;
};
vcc_vbus_typec1: vcc-vbus-typec1 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc_vbus_typec1_en>;
regulator-name = "vcc_vbus_typec1";
regulator-always-on;
vin-supply = <&vcc_sys>;
};
vcc_sys: vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_sys>;
};
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
vin-supply = <&vcc3v3_sys>;
};
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_l>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_l>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_l>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_l>;
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_b>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_b>;
};
&emmc_phy {
status = "okay";
};
&gmac {
assigned-clocks = <&cru SCLK_RMII_SRC>;
assigned-clock-parents = <&clkin_gmac>;
clock_in_out = "input";
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>;
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 50000>;
tx_delay = <0x28>;
rx_delay = <0x11>;
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c3>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_cec>;
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
i2c-scl-rising-time-ns = <168>;
i2c-scl-falling-time-ns = <4>;
status = "okay";
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio1>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
vcc10-supply = <&vcc3v3_sys>;
vcc11-supply = <&vcc3v3_sys>;
vcc12-supply = <&vcc3v3_sys>;
vddio-supply = <&vcc1v8_pmu>;
regulators {
vdd_center: DCDC_REG1 {
regulator-name = "vdd_center";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_l: DCDC_REG2 {
regulator-name = "vdd_cpu_l";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_1v8: DCDC_REG4 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca1v8_codec: LDO_REG1 {
regulator-name = "vcca1v8_codec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_hdmi: LDO_REG2 {
regulator-name = "vcc1v8_hdmi";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc1v8_pmu: LDO_REG3 {
regulator-name = "vcc1v8_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_sdio: LDO_REG4 {
regulator-name = "vcc_sdio";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcca3v0_codec: LDO_REG5 {
regulator-name = "vcca3v0_codec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v5: LDO_REG6 {
regulator-name = "vcc_1v5";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1500000>;
};
};
vcca0v9_hdmi: LDO_REG7 {
regulator-name = "vcca0v9_hdmi";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v0: LDO_REG8 {
regulator-name = "vcc_3v0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcc3v3_s3: vcc_lan: SWITCH_REG1 {
regulator-name = "vcc3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_s0: SWITCH_REG2 {
regulator-name = "vcc3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
vdd_cpu_b: regulator@40 {
compatible = "silergy,syr827";
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
pinctrl-0 = <&vsel1_gpio>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc3v3_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: regulator@41 {
compatible = "silergy,syr828";
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
pinctrl-0 = <&vsel2_gpio>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
regulator-ramp-delay = <1000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc3v3_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c1 {
i2c-scl-rising-time-ns = <300>;
i2c-scl-falling-time-ns = <15>;
status = "okay";
};
&i2c3 {
i2c-scl-rising-time-ns = <450>;
i2c-scl-falling-time-ns = <15>;
status = "okay";
};
&i2c4 {
i2c-scl-rising-time-ns = <600>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
fusb1: usb-typec@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
interrupt-parent = <&gpio1>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fusb1_int>;
vbus-supply = <&vcc_vbus_typec1>;
status = "okay";
};
};
&i2c7 {
i2c-scl-rising-time-ns = <600>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
fusb0: usb-typec@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
interrupt-parent = <&gpio1>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fusb0_int>;
vbus-supply = <&vcc_vbus_typec0>;
status = "okay";
};
};
&i2s0 {
rockchip,playback-channels = <8>;
rockchip,capture-channels = <8>;
status = "okay";
};
&i2s1 {
rockchip,playback-channels = <2>;
rockchip,capture-channels = <2>;
status = "okay";
};
&i2s2 {
status = "okay";
};
&io_domains {
audio-supply = <&vcca1v8_codec>;
bt656-supply = <&vcc_3v0>;
gpio1830-supply = <&vcc_3v0>;
sdmmc-supply = <&vcc_sdio>;
status = "okay";
};
&pmu_io_domains {
pmu1830-supply = <&vcc_3v0>;
status = "okay";
};
&pinctrl {
lcd-panel {
lcd_panel_reset: lcd-panel-reset {
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
pmic {
vsel1_gpio: vsel1-gpio {
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
vsel2_gpio: vsel2-gpio {
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb2 {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
hub_rst: hub-rst {
rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
};
};
usb-typec {
vcc_vbus_typec1_en: vcc-vbus-typec1-en {
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
fusb30x {
fusb0_int: fusb0-int {
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
};
fusb1_int: fusb1-int {
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pwm0 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&saradc {
vref-supply = <&vcca1v8_s3>;
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
status = "okay";
};
&sdhci {
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
non-removable;
status = "okay";
};
&tcphy0 {
status = "okay";
};
&tcphy1 {
status = "okay";
};
&tsadc {
/* tshut mode 0:CRU 1:GPIO */
rockchip,hw-tshut-mode = <1>;
/* tshut polarity 0:LOW 1:HIGH */
rockchip,hw-tshut-polarity = <1>;
status = "okay";
};
&u2phy0 {
status = "okay";
u2phy0_otg: otg-port {
phy-supply = <&vcc_vbus_typec0>;
status = "okay";
};
u2phy0_host: host-port {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
};
&u2phy1 {
status = "okay";
u2phy1_otg: otg-port {
phy-supply = <&vcc_vbus_typec1>;
status = "okay";
};
u2phy1_host: host-port {
phy-supply = <&vcc5v0_host>;
status = "okay";
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer &uart0_cts>;
status = "okay";
};
&uart2 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usbdrd3_0 {
status = "okay";
};
&usbdrd_dwc3_0 {
status = "okay";
};
&usbdrd3_1 {
status = "okay";
};
&usbdrd_dwc3_1 {
status = "okay";
dr_mode = "host";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
......@@ -103,20 +103,10 @@ vcc3v3_sys: vcc3v3-sys {
vin-supply = <&vcc_sys>;
};
vcc_sys: vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host";
......@@ -124,6 +114,26 @@ vcc5v0_host: vcc5v0-host-regulator {
vin-supply = <&vcc_sys>;
};
vcc5v0_typec0: vcc5v0-typec0-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_typec0_en>;
regulator-name = "vcc5v0_typec0";
vin-supply = <&vcc_sys>;
};
vcc_sys: vcc-sys {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
......@@ -208,7 +218,7 @@ rk808: pmic@1b {
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l &pmic_dvs2>;
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
......@@ -455,11 +465,6 @@ pmic_int_l: pmic-int-l {
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
pmic_dvs2: pmic-dvs2 {
rockchip,pins =
<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
vsel1_gpio: vsel1-gpio {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
......@@ -474,6 +479,10 @@ vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_typec0_en: vcc5v0-typec0-en {
rockchip,pins =
<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
......@@ -531,6 +540,7 @@ &u2phy0 {
status = "okay";
u2phy0_otg: otg-port {
phy-supply = <&vcc5v0_typec0>;
status = "okay";
};
......
......@@ -74,6 +74,7 @@ cpu_l0: cpu@0 {
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l1: cpu@1 {
......@@ -84,6 +85,7 @@ cpu_l1: cpu@1 {
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l2: cpu@2 {
......@@ -94,6 +96,7 @@ cpu_l2: cpu@2 {
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l3: cpu@3 {
......@@ -104,6 +107,7 @@ cpu_l3: cpu@3 {
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_b0: cpu@100 {
......@@ -114,6 +118,7 @@ cpu_b0: cpu@100 {
clocks = <&cru ARMCLKB>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <436>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_b1: cpu@101 {
......@@ -124,6 +129,29 @@ cpu_b1: cpu@101 {
clocks = <&cru ARMCLKB>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <436>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
idle-states {
entry-method = "psci";
CPU_SLEEP: cpu-sleep {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x0010000>;
entry-latency-us = <120>;
exit-latency-us = <250>;
min-residency-us = <900>;
};
CLUSTER_SLEEP: cluster-sleep {
compatible = "arm,idle-state";
local-timer-stop;
arm,psci-suspend-param = <0x1010000>;
entry-latency-us = <400>;
exit-latency-us = <500>;
min-residency-us = <2000>;
};
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment