Merge tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - Remove unused lists from ASPM pcie_link_state (Frederick Lawler)

 - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian
   King)

 - Expand Kconfig "PF" acronyms (Randy Dunlap)

 - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas)

 - Add missing include to drivers/pci.h (Alexandru Gagniuc)

 - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it
   instead of xhci (Thinh Nguyen)

 - Clean up P2PDMA documentation (Randy Dunlap)

 - Allow runtime PM even if driver doesn't supply callbacks (Jarkko
   Nikula)

 - Remove status check after submitting Switchtec MRPC Firmware Download
   commands to avoid Completion Timeouts (Kelvin Cao)

 - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher)

 - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue
   (Joey Zhang)

 - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao)

 - Add Switchtec MRPC DMA mode support (Wesley Sheng)

 - Skip VF scanning on powerpc, which does this in firmware (Sebastian
   Ott)

 - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang)

 - Constify histb dw_pcie_host_ops structure (Julia Lawall)

 - Support multiple power domains for imx6 (Leonard Crestez)

 - Constify layerscape driver data (Stefan Agner)

 - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)

 - Support armada8k GPIO reset (Baruch Siach)

 - Support suspend/resume support on imx6 (Leonard Crestez)

 - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)

 - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)

 - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)

 - Mask DesignWare interrupts instead of disabling them to avoid lost
   interrupts (Marc Zyngier)

 - Add locking when acking DesignWare interrupts (Marc Zyngier)

 - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier)

 - Use devm resource parser in mediatek (Honghui Zhang)

 - Remove unused mediatek "num-lanes" DT property (Honghui Zhang)

 - Add UniPhier PCIe controller driver and DT bindings (Kunihiko
   Hayashi)

 - Enable MSI for imx6 downstream components (Richard Zhu)

* tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits)
  PCI: imx: Enable MSI from downstream components
  s390/pci: skip VF scanning
  PCI/IOV: Add flag so platforms can skip VF scanning
  PCI/IOV: Factor out sriov_add_vfs()
  PCI: uniphier: Add UniPhier PCIe host controller support
  dt-bindings: PCI: Add UniPhier PCIe host controller description
  PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  arm64: dts: mt7622: Remove un-used property for PCIe
  arm: dts: mt7623: Remove un-used property for PCIe
  dt-bindings: PCI: MediaTek: Remove un-used property
  PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
  MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
  PCI: dwc: Don't hard-code DBI/ATU offset
  PCI: imx: Add imx6sx suspend/resume support
  PCI: armada8k: Add support for gpio controlled reset signal
  PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
  PCI: dwc: layerscape: Constify driver data
  PCI: imx: Add multi-pd support
  PCI: Override Synopsys USB 3.x HAPS device class
  ...

Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt

+Amlogic Meson AXG DWC PCIE SoC controller
+
+Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
+It shares common functions with the PCIe DesignWare core driver and
+inherits common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt.
+
+Additional properties are described here:
+
+Required properties:
+- compatible:
+	should contain "amlogic,axg-pcie" to identify the core.
+- reg:
+	should contain the configuration address space.
+- reg-names: Must be
+	- "elbi"	External local bus interface registers
+	- "cfg"		Meson specific registers
+	- "phy"		Meson PCIE PHY registers
+	- "config"	PCIe configuration space
+- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Must include the following entries:
+	- "pclk"       PCIe GEN 100M PLL clock
+	- "port"       PCIe_x(A or B) RC clock gate
+	- "general"    PCIe Phy clock
+	- "mipi"       PCIe_x(A or B) 100M ref clock gate
+- resets: phandle to the reset lines.
+- reset-names: must contain "phy" "port" and "apb"
+       - "phy"         Share PHY reset
+       - "port"        Port A or B reset
+       - "apb"         Share APB reset
+- device_type:
+	should be "pci". As specified in designware-pcie.txt
+
+
+Example configuration:
+
+	pcie: pcie@f9800000 {
+			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+			reg = <0x0 0xf9800000 0x0 0x400000
+					0x0 0xff646000 0x0 0x2000
+					0x0 0xff644000 0x0 0x2000
+					0x0 0xf9f00000 0x0 0x100000>;
+			reg-names = "elbi", "cfg", "phy", "config";
+			reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+			bus-range = <0x0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x82000000 0 0 0x0 0xf9c00000 0 0x00300000>;
+
+			clocks = <&clkc CLKID_USB
+					&clkc CLKID_MIPI_ENABLE
+					&clkc CLKID_PCIE_A
+					&clkc CLKID_PCIE_CML_EN0>;
+			clock-names = "general",
+					"mipi",
+					"pclk",
+					"port";
+			resets = <&reset RESET_PCIE_PHY>,
+				<&reset RESET_PCIE_A>,
+				<&reset RESET_PCIE_APB>;
+			reset-names = "phy",
+					"port",
+					"apb";
+	};

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt

@@ -41,7 +41,9 @@ Optional properties:
 Additional required properties for imx6sx-pcie:
 - clock names: Must include the following additional entries:
 	- "pcie_inbound_axi"
-- power-domains: Must be set to a phandle pointing to the PCIE_PHY power domain
+- power-domains: Must be set to phandles pointing to the DISPLAY and
+  PCIE_PHY power domains
+- power-domain-names: Must be "pcie", "pcie_phy"
 
 Additional required properties for imx7d-pcie:
 - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain

Documentation/devicetree/bindings/pci/mediatek-pcie.txt

@@ -65,7 +65,6 @@ Required properties:
   explanation.
 - ranges: Sub-ranges distributed from the PCIe controller node. An empty
   property is sufficient.
-- num-lanes: Number of lanes to use for this port.
 
 Examples for MT7623:
 
@@ -118,7 +117,6 @@ Examples for MT7623:
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
 			ranges;
-			num-lanes = <1>;
 		};
 
 		pcie@1,0 {
@@ -129,7 +127,6 @@ Examples for MT7623:
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
 			ranges;
-			num-lanes = <1>;
 		};
 
 		pcie@2,0 {
@@ -140,7 +137,6 @@ Examples for MT7623:
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
 			ranges;
-			num-lanes = <1>;
 		};
 	};
 
@@ -172,7 +168,6 @@ Examples for MT2712:
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
-			num-lanes = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
 					<0 0 0 2 &pcie_intc0 1>,
@@ -191,7 +186,6 @@ Examples for MT2712:
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
-			num-lanes = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
 					<0 0 0 2 &pcie_intc1 1>,
@@ -245,7 +239,6 @@ Examples for MT7622:
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
-			num-lanes = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
 					<0 0 0 2 &pcie_intc0 1>,
@@ -264,7 +257,6 @@ Examples for MT7622:
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
-			num-lanes = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
 					<0 0 0 2 &pcie_intc1 1>,

Documentation/devicetree/bindings/pci/uniphier-pcie.txt

+Socionext UniPhier PCIe host controller bindings
+
+This describes the devicetree bindings for PCIe host controller implemented
+on Socionext UniPhier SoCs.
+
+UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core.
+It shares common functions with the PCIe DesignWare core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pcie.txt.
+
+Required properties:
+- compatible: Should be "socionext,uniphier-pcie".
+- reg: Specifies offset and length of the register set for the device.
+	According to the reg-names, appropriate register sets are required.
+- reg-names: Must include the following entries:
+    "dbi"    - controller configuration registers
+    "link"   - SoC-specific glue layer registers
+    "config" - PCIe configuration space
+- clocks: A phandle to the clock gate for PCIe glue layer including
+	the host controller.
+- resets: A phandle to the reset line for PCIe glue layer including
+	the host controller.
+- interrupts: A list of interrupt specifiers. According to the
+	interrupt-names, appropriate interrupts are required.
+- interrupt-names: Must include the following entries:
+    "dma" - DMA interrupt
+    "msi" - MSI interrupt
+
+Optional properties:
+- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate
+	phys are required.
+- phy-names: Must be "pcie-phy".
+
+Required sub-node:
+- legacy-interrupt-controller: Specifies interrupt controller for legacy PCI
+	interrupts.
+
+Required properties for legacy-interrupt-controller:
+- interrupt-controller: identifies the node as an interrupt controller.
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- interrupt-parent: Phandle to the parent interrupt controller.
+- interrupts: An interrupt specifier for legacy interrupt.
+
+Example:
+
+	pcie: pcie@66000000 {
+		compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
+		status = "disabled";
+		reg-names = "dbi", "link", "config";
+		reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
+		      <0x2fff0000 0x10000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		clocks = <&sys_clk 24>;
+		resets = <&sys_rst 24>;
+		num-lanes = <1>;
+		num-viewport = <1>;
+		bus-range = <0x0 0xff>;
+		device_type = "pci";
+		ranges =
+		/* downstream I/O */
+			<0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000
+		/* non-prefetchable memory */
+			 0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
+		#interrupt-cells = <1>;
+		interrupt-names = "dma", "msi";
+		interrupts = <0 224 4>, <0 225 4>;
+		interrupt-map-mask = <0 0 0  7>;
+		interrupt-map = <0 0 0  1  &pcie_intc 0>,	/* INTA */
+				<0 0 0  2  &pcie_intc 1>,	/* INTB */
+				<0 0 0  3  &pcie_intc 2>,	/* INTC */
+				<0 0 0  4  &pcie_intc 3>;	/* INTD */
+
+		pcie_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 226 4>;
+		};
+	};

Documentation/driver-api/pci/p2pdma.rst

@@ -49,7 +49,7 @@ For example, in the NVMe Target Copy Offload implementation:
   in that it exposes any CMB (Controller Memory Buffer) as a P2P memory
   resource (provider), it accepts P2P memory pages as buffers in requests
   to be used directly (client) and it can also make use of the CMB as
-  submission queue entries (orchastrator).
+  submission queue entries (orchestrator).
 * The RDMA driver is a client in this arrangement so that an RNIC
   can DMA directly to the memory exposed by the NVMe device.
 * The NVMe Target driver (nvmet) can orchestrate the data from the RNIC
@@ -111,7 +111,7 @@ that's compatible with all clients using  :c:func:`pci_p2pmem_find()`.
 If more than one provider is supported, the one nearest to all the clients will
 be chosen first. If more than one provider is an equal distance away, the
 one returned will be chosen at random (it is not an arbitrary but
-truely random). This function returns the PCI device to use for the provider
+truly random). This function returns the PCI device to use for the provider
 with a reference taken and therefore when it's no longer needed it should be
 returned with pci_dev_put().
 

MAINTAINERS

@@ -11750,6 +11750,7 @@ F:	include/uapi/linux/pci*
 F:	lib/pci*
 F:	arch/x86/pci/
 F:	arch/x86/kernel/quirks.c
+F:	arch/x86/kernel/early-quirks.c
 
 PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
@@ -11759,6 +11760,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/pci.git/
 S:	Supported
 F:	drivers/pci/controller/
 
+PCIE DRIVER FOR AMLOGIC MESON
+M:	Yue Wang <yue.wang@Amlogic.com>
+L:	linux-pci@vger.kernel.org
+L:	linux-amlogic@lists.infradead.org
+S:	Maintained
+F:	drivers/pci/controller/dwc/pci-meson.c
+
 PCIE DRIVER FOR AXIS ARTPEC
 M:	Jesper Nilsson <jesper.nilsson@axis.com>
 L:	linux-arm-kernel@axis.com
@@ -11791,7 +11799,6 @@ F:	Documentation/devicetree/bindings/pci/kirin-pcie.txt
 F:	drivers/pci/controller/dwc/pcie-kirin.c
 
 PCIE DRIVER FOR HISILICON STB
-M:	Jianguo Sun <sunjianguo1@huawei.com>
 M:	Shawn Guo <shawn.guo@linaro.org>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
@@ -11828,6 +11835,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
 F:	drivers/pci/controller/pci-v3-semi.c
 
+PCIE DRIVER FOR SOCIONEXT UNIPHIER
+M:	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+F:	drivers/pci/controller/dwc/pcie-uniphier.c
+
 PCIE DRIVER FOR ST SPEAR13XX
 M:	Pratyush Anand <pratyush.anand@gmail.com>
 L:	linux-pci@vger.kernel.org

arch/arm/boot/dts/mt7623.dtsi

@@ -850,7 +850,6 @@ pcie@0,0 {
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
 			ranges;
-			num-lanes = <1>;
 			status = "disabled";
 		};
 
@@ -862,7 +861,6 @@ pcie@1,0 {
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
 			ranges;
-			num-lanes = <1>;
 			status = "disabled";
 		};
 
@@ -874,7 +872,6 @@ pcie@2,0 {
 			interrupt-map-mask = <0 0 0 0>;
 			interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
 			ranges;
-			num-lanes = <1>;
 			status = "disabled";
 		};
 	};

arch/arm64/boot/dts/mediatek/mt7622.dtsi

@@ -802,7 +802,6 @@ pcie0: pcie@0,0 {
 			ranges;
 			status = "disabled";
 
-			num-lanes = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
 					<0 0 0 2 &pcie_intc0 1>,
@@ -823,7 +822,6 @@ pcie1: pcie@1,0 {
 			ranges;
 			status = "disabled";
 
-			num-lanes = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
 					<0 0 0 2 &pcie_intc1 1>,

arch/s390/pci/pci.c

@@ -649,6 +649,9 @@ int pcibios_add_device(struct pci_dev *pdev)
 	struct resource *res;
 	int i;
 
+	if (pdev->is_physfn)
+		pdev->no_vf_scan = 1;
+
 	pdev->dev.groups = zpci_attr_groups;
 	pdev->dev.dma_ops = &s390_pci_dma_ops;
 	zpci_map_resources(pdev);

arch/x86/pci/broadcom_bus.c

@@ -50,8 +50,8 @@ static void __init cnb20le_res(u8 bus, u8 slot, u8 func)
 	word1 = read_pci_config_16(bus, slot, func, 0xc0);
 	word2 = read_pci_config_16(bus, slot, func, 0xc2);
 	if (word1 != word2) {
-		res.start = (word1 << 16) | 0x0000;
-		res.end   = (word2 << 16) | 0xffff;
+		res.start = ((resource_size_t) word1 << 16) | 0x0000;
+		res.end   = ((resource_size_t) word2 << 16) | 0xffff;
 		res.flags = IORESOURCE_MEM;
 		update_res(info, res.start, res.end, res.flags, 0);
 	}

drivers/pci/Kconfig

@@ -103,9 +103,9 @@ config PCI_PF_STUB
 	depends on PCI_IOV
 	help
 	  Say Y or M here if you want to enable support for devices that
-	  require SR-IOV support, while at the same time the PF itself is
-	  not providing any actual services on the host itself such as
-	  storage or networking.
+	  require SR-IOV support, while at the same time the PF (Physical
+	  Function) itself is not providing any actual services on the
+	  host itself such as storage or networking.
 
 	  When in doubt, say N.
 

drivers/pci/controller/dwc/Kconfig

@@ -89,8 +89,8 @@ config PCI_EXYNOS
 	select PCIE_DW_HOST
 
 config PCI_IMX6
-	bool "Freescale i.MX6 PCIe controller"
-	depends on SOC_IMX6Q || (ARM && COMPILE_TEST)
+	bool "Freescale i.MX6/7 PCIe controller"
+	depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST)
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW_HOST
 
@@ -193,4 +193,24 @@ config PCIE_HISI_STB
 	help
           Say Y here if you want PCIe controller support on HiSilicon STB SoCs
 
+config PCI_MESON
+	bool "MESON PCIe controller"
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_DW_HOST
+	help
+	  Say Y here if you want to enable PCI controller support on Amlogic
+	  SoCs. The PCI controller on Amlogic is based on DesignWare hardware
+	  and therefore the driver re-uses the DesignWare core functions to
+	  implement the driver.
+
+config PCIE_UNIPHIER
+	bool "Socionext UniPhier PCIe controllers"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && HAS_IOMEM
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_DW_HOST
+	help
+	  Say Y here if you want PCIe controller support on UniPhier SoCs.
+	  This driver supports LD20 and PXs3 SoCs.
+
 endmenu

drivers/pci/controller/dwc/Makefile

@@ -14,6 +14,8 @@ obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
 obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
 obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
+obj-$(CONFIG_PCI_MESON) += pci-meson.o
+obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
 
 # The following drivers are for devices that use the generic ACPI
 # pci_root.c driver but don't support standard ECAM config access.

drivers/pci/controller/dwc/pci-imx6.c

@@ -27,6 +27,8 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/reset.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
 
 #include "pcie-designware.h"
 
@@ -59,6 +61,11 @@ struct imx6_pcie {
 	u32			tx_swing_low;
 	int			link_gen;
 	struct regulator	*vpcie;
+
+	/* power domain for pcie */
+	struct device		*pd_pcie;
+	/* power domain for pcie phy */
+	struct device		*pd_pcie_phy;
 };
 
 /* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
@@ -67,6 +74,7 @@ struct imx6_pcie {
 #define PHY_PLL_LOCK_WAIT_USLEEP_MAX	200
 
 /* PCIe Root Complex registers (memory-mapped) */
+#define PCIE_RC_IMX6_MSI_CAP			0x50
 #define PCIE_RC_LCR				0x7c
 #define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1	0x1
 #define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2	0x2
@@ -290,6 +298,43 @@ static int imx6q_pcie_abort_handler(unsigned long addr,
 	return 1;
 }
 
+static int imx6_pcie_attach_pd(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+	struct device_link *link;
+
+	/* Do nothing when in a single power domain */
+	if (dev->pm_domain)
+		return 0;
+
+	imx6_pcie->pd_pcie = dev_pm_domain_attach_by_name(dev, "pcie");
+	if (IS_ERR(imx6_pcie->pd_pcie))
+		return PTR_ERR(imx6_pcie->pd_pcie);
+	link = device_link_add(dev, imx6_pcie->pd_pcie,
+			DL_FLAG_STATELESS |
+			DL_FLAG_PM_RUNTIME |
+			DL_FLAG_RPM_ACTIVE);
+	if (!link) {
+		dev_err(dev, "Failed to add device_link to pcie pd.\n");
+		return -EINVAL;
+	}
+
+	imx6_pcie->pd_pcie_phy = dev_pm_domain_attach_by_name(dev, "pcie_phy");
+	if (IS_ERR(imx6_pcie->pd_pcie_phy))
+		return PTR_ERR(imx6_pcie->pd_pcie_phy);
+
+	device_link_add(dev, imx6_pcie->pd_pcie_phy,
+			DL_FLAG_STATELESS |
+			DL_FLAG_PM_RUNTIME |
+			DL_FLAG_RPM_ACTIVE);
+	if (IS_ERR(link)) {
+		dev_err(dev, "Failed to add device_link to pcie_phy pd: %ld\n", PTR_ERR(link));
+		return PTR_ERR(link);
+	}
+
+	return 0;
+}
+
 static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 {
 	struct device *dev = imx6_pcie->pci->dev;
@@ -765,8 +810,28 @@ static void imx6_pcie_ltssm_disable(struct device *dev)
 
 static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
 {
+	struct device *dev = imx6_pcie->pci->dev;
+
+	/* Some variants have a turnoff reset in DT */
+	if (imx6_pcie->turnoff_reset) {
 		reset_control_assert(imx6_pcie->turnoff_reset);
 		reset_control_deassert(imx6_pcie->turnoff_reset);
+		goto pm_turnoff_sleep;
+	}
+
+	/* Others poke directly at IOMUXC registers */
+	switch (imx6_pcie->variant) {
+	case IMX6SX:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				IMX6SX_GPR12_PCIE_PM_TURN_OFF,
+				IMX6SX_GPR12_PCIE_PM_TURN_OFF);
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				IMX6SX_GPR12_PCIE_PM_TURN_OFF, 0);
+		break;
+	default:
+		dev_err(dev, "PME_Turn_Off not implemented\n");
+		return;
+	}
 
 	/*
 	 * Components with an upstream port must respond to
@@ -775,6 +840,7 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
 	 * The standard recommends a 1-10ms timeout after which to
 	 * proceed anyway as if acks were received.
 	 */
+pm_turnoff_sleep:
 	usleep_range(1000, 10000);
 }
 
@@ -784,18 +850,31 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
 	clk_disable_unprepare(imx6_pcie->pcie_phy);
 	clk_disable_unprepare(imx6_pcie->pcie_bus);
 
-	if (imx6_pcie->variant == IMX7D) {
+	switch (imx6_pcie->variant) {
+	case IMX6SX:
+		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
+		break;
+	case IMX7D:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
 				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
 				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+		break;
+	default:
+		break;
 	}
 }
 
+static inline bool imx6_pcie_supports_suspend(struct imx6_pcie *imx6_pcie)
+{
+	return (imx6_pcie->variant == IMX7D ||
+		imx6_pcie->variant == IMX6SX);
+}
+
 static int imx6_pcie_suspend_noirq(struct device *dev)
 {
 	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
 
-	if (imx6_pcie->variant != IMX7D)
+	if (!imx6_pcie_supports_suspend(imx6_pcie))
 		return 0;
 
 	imx6_pcie_pm_turnoff(imx6_pcie);
@@ -811,7 +890,7 @@ static int imx6_pcie_resume_noirq(struct device *dev)
 	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
 	struct pcie_port *pp = &imx6_pcie->pci->pp;
 
-	if (imx6_pcie->variant != IMX7D)
+	if (!imx6_pcie_supports_suspend(imx6_pcie))
 		return 0;
 
 	imx6_pcie_assert_core_reset(imx6_pcie);
@@ -840,6 +919,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 	struct resource *dbi_base;
 	struct device_node *node = dev->of_node;
 	int ret;
+	u16 val;
 
 	imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL);
 	if (!imx6_pcie)
@@ -977,10 +1057,22 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, imx6_pcie);
 
+	ret = imx6_pcie_attach_pd(dev);
+	if (ret)
+		return ret;
+
 	ret = imx6_add_pcie_port(imx6_pcie, pdev);
 	if (ret < 0)
 		return ret;
 
+	if (pci_msi_enabled()) {
+		val = dw_pcie_readw_dbi(pci, PCIE_RC_IMX6_MSI_CAP +
+					PCI_MSI_FLAGS);
+		val |= PCI_MSI_FLAGS_ENABLE;
+		dw_pcie_writew_dbi(pci, PCIE_RC_IMX6_MSI_CAP + PCI_MSI_FLAGS,
+				   val);
+	}
+
 	return 0;
 }
 

drivers/pci/controller/dwc/pci-layerscape.c

@@ -222,12 +222,12 @@ static const struct dw_pcie_ops dw_ls_pcie_ops = {
 	.link_up = ls_pcie_link_up,
 };
 
-static struct ls_pcie_drvdata ls1021_drvdata = {
+static const struct ls_pcie_drvdata ls1021_drvdata = {
 	.ops = &ls1021_pcie_host_ops,
 	.dw_pcie_ops = &dw_ls1021_pcie_ops,
 };
 
-static struct ls_pcie_drvdata ls1043_drvdata = {
+static const struct ls_pcie_drvdata ls1043_drvdata = {
 	.lut_offset = 0x10000,
 	.ltssm_shift = 24,
 	.lut_dbg = 0x7fc,
@@ -235,7 +235,7 @@ static struct ls_pcie_drvdata ls1043_drvdata = {
 	.dw_pcie_ops = &dw_ls_pcie_ops,
 };
 
-static struct ls_pcie_drvdata ls1046_drvdata = {
+static const struct ls_pcie_drvdata ls1046_drvdata = {
 	.lut_offset = 0x80000,
 	.ltssm_shift = 24,
 	.lut_dbg = 0x407fc,
@@ -243,7 +243,7 @@ static struct ls_pcie_drvdata ls1046_drvdata = {
 	.dw_pcie_ops = &dw_ls_pcie_ops,
 };
 
-static struct ls_pcie_drvdata ls2080_drvdata = {
+static const struct ls_pcie_drvdata ls2080_drvdata = {
 	.lut_offset = 0x80000,
 	.ltssm_shift = 0,
 	.lut_dbg = 0x7fc,
@@ -251,7 +251,7 @@ static struct ls_pcie_drvdata ls2080_drvdata = {
 	.dw_pcie_ops = &dw_ls_pcie_ops,
 };
 
-static struct ls_pcie_drvdata ls2088_drvdata = {
+static const struct ls_pcie_drvdata ls2088_drvdata = {
 	.lut_offset = 0x80000,
 	.ltssm_shift = 0,
 	.lut_dbg = 0x407fc,

drivers/pci/controller/dwc/pcie-armada8k.c

@@ -22,6 +22,7 @@
 #include <linux/resource.h>
 #include <linux/of_pci.h>
 #include <linux/of_irq.h>
+#include <linux/gpio/consumer.h>
 
 #include "pcie-designware.h"
 
@@ -29,6 +30,7 @@ struct armada8k_pcie {
 	struct dw_pcie *pci;
 	struct clk *clk;
 	struct clk *clk_reg;
+	struct gpio_desc *reset_gpio;
 };
 
 #define PCIE_VENDOR_REGS_OFFSET		0x8000
@@ -137,6 +139,12 @@ static int armada8k_pcie_host_init(struct pcie_port *pp)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct armada8k_pcie *pcie = to_armada8k_pcie(pci);
 
+	if (pcie->reset_gpio) {
+		/* assert and then deassert the reset signal */
+		gpiod_set_value_cansleep(pcie->reset_gpio, 1);
+		msleep(100);
+		gpiod_set_value_cansleep(pcie->reset_gpio, 0);
+	}
 	dw_pcie_setup_rc(pp);
 	armada8k_pcie_establish_link(pcie);
 
@@ -249,6 +257,14 @@ static int armada8k_pcie_probe(struct platform_device *pdev)
 		goto fail_clkreg;
 	}
 
+	/* Get reset gpio signal and hold asserted (logically high) */
+	pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						   GPIOD_OUT_HIGH);
+	if (IS_ERR(pcie->reset_gpio)) {
+		ret = PTR_ERR(pcie->reset_gpio);
+		goto fail_clkreg;
+	}
+
 	platform_set_drvdata(pdev, pcie);
 
 	ret = armada8k_add_pcie_port(pcie, pdev);

drivers/pci/controller/dwc/pcie-designware-ep.c

@@ -503,6 +503,10 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 		dev_err(dev, "dbi_base/dbi_base2 is not populated\n");
 		return -EINVAL;
 	}
+	if (pci->iatu_unroll_enabled && !pci->atu_base) {
+		dev_err(dev, "atu_base is not populated\n");
+		return -EINVAL;
+	}
 
 	ret = of_property_read_u32(np, "num-ib-windows", &ep->num_ib_windows);
 	if (ret < 0) {

drivers/pci/controller/dwc/pcie-designware-host.c

@@ -99,9 +99,6 @@ irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 					       (i * MAX_MSI_IRQS_PER_CTRL) +
 					       pos);
 			generic_handle_irq(irq);
-			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS +
-						(i * MSI_REG_CTRL_BLOCK_SIZE),
-					    4, 1 << pos);
 			pos++;
 		}
 	}
@@ -168,8 +165,8 @@ static void dw_pci_bottom_mask(struct irq_data *data)
 		bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
 		pp->irq_status[ctrl] &= ~(1 << bit);
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
-				    pp->irq_status[ctrl]);
+		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+				    ~pp->irq_status[ctrl]);
 	}
 
 	raw_spin_unlock_irqrestore(&pp->lock, flags);
@@ -191,8 +188,8 @@ static void dw_pci_bottom_unmask(struct irq_data *data)
 		bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
 		pp->irq_status[ctrl] |= 1 << bit;
-		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + res, 4,
-				    pp->irq_status[ctrl]);
+		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
+				    ~pp->irq_status[ctrl]);
 	}
 
 	raw_spin_unlock_irqrestore(&pp->lock, flags);
@@ -200,13 +197,22 @@ static void dw_pci_bottom_unmask(struct irq_data *data)
 
 static void dw_pci_bottom_ack(struct irq_data *d)
 {
-	struct msi_desc *msi = irq_data_get_msi_desc(d);
-	struct pcie_port *pp;
+	struct pcie_port *pp  = irq_data_get_irq_chip_data(d);
+	unsigned int res, bit, ctrl;
+	unsigned long flags;
 
-	pp = msi_desc_to_pci_sysdata(msi);
+	ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL;
+	res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
+	bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
+
+	raw_spin_lock_irqsave(&pp->lock, flags);
+
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + res, 4, 1 << bit);
 
 	if (pp->ops->msi_irq_ack)
 		pp->ops->msi_irq_ack(d->hwirq, pp);
+
+	raw_spin_unlock_irqrestore(&pp->lock, flags);
 }
 
 static struct irq_chip dw_pci_msi_bottom_irq_chip = {
@@ -658,10 +664,15 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 	num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
 
 	/* Initialize IRQ Status array */
-	for (ctrl = 0; ctrl < num_ctrls; ctrl++)
-		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
+	for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
+		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
 					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
-				    4, &pp->irq_status[ctrl]);
+				    4, ~0);
+		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
+					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
+				    4, ~0);
+		pp->irq_status[ctrl] = 0;
+	}
 
 	/* Setup RC BARs */
 	dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0x00000004);
@@ -699,6 +710,9 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 		dev_dbg(pci->dev, "iATU unroll: %s\n",
 			pci->iatu_unroll_enabled ? "enabled" : "disabled");
 
+		if (pci->iatu_unroll_enabled && !pci->atu_base)
+			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
+
 		dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
 					  PCIE_ATU_TYPE_MEM, pp->mem_base,
 					  pp->mem_bus_addr, pp->mem_size);

drivers/pci/controller/dwc/pcie-designware.c

@@ -93,7 +93,7 @@ static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
 {
 	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
 
-	return dw_pcie_readl_dbi(pci, offset + reg);
+	return dw_pcie_readl_atu(pci, offset + reg);
 }
 
 static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
@@ -101,7 +101,7 @@ static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
 {
 	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
 
-	dw_pcie_writel_dbi(pci, offset + reg, val);
+	dw_pcie_writel_atu(pci, offset + reg, val);
 }
 
 static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
@@ -187,7 +187,7 @@ static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg)
 {
 	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
 
-	return dw_pcie_readl_dbi(pci, offset + reg);
+	return dw_pcie_readl_atu(pci, offset + reg);
 }
 
 static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
@@ -195,7 +195,7 @@ static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
 {
 	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
 
-	dw_pcie_writel_dbi(pci, offset + reg, val);
+	dw_pcie_writel_atu(pci, offset + reg, val);
 }
 
 static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,

drivers/pci/controller/dwc/pcie-designware.h

@@ -92,12 +92,20 @@
 #define PCIE_ATU_UNR_LOWER_TARGET	0x14
 #define PCIE_ATU_UNR_UPPER_TARGET	0x18
 
+/*
+ * The default address offset between dbi_base and atu_base. Root controller
+ * drivers are not required to initialize atu_base if the offset matches this
+ * default; the driver core automatically derives atu_base from dbi_base using
+ * this offset, if atu_base not set.
+ */
+#define DEFAULT_DBI_ATU_OFFSET (0x3 << 20)
+
 /* Register address builder */
 #define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \
-			((0x3 << 20) | ((region) << 9))
+		((region) << 9)
 
 #define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \
-			((0x3 << 20) | ((region) << 9) | (0x1 << 8))
+		(((region) << 9) | (0x1 << 8))
 
 #define MAX_MSI_IRQS			256
 #define MAX_MSI_IRQS_PER_CTRL		32
@@ -219,6 +227,8 @@ struct dw_pcie {
 	struct device		*dev;
 	void __iomem		*dbi_base;
 	void __iomem		*dbi_base2;
+	/* Used when iatu_unroll_enabled is true */
+	void __iomem		*atu_base;
 	u32			num_viewport;
 	u8			iatu_unroll_enabled;
 	struct pcie_port	pp;
@@ -289,6 +299,16 @@ static inline u32 dw_pcie_readl_dbi2(struct dw_pcie *pci, u32 reg)
 	return __dw_pcie_read_dbi(pci, pci->dbi_base2, reg, 0x4);
 }
 
+static inline void dw_pcie_writel_atu(struct dw_pcie *pci, u32 reg, u32 val)
+{
+	__dw_pcie_write_dbi(pci, pci->atu_base, reg, 0x4, val);
+}
+
+static inline u32 dw_pcie_readl_atu(struct dw_pcie *pci, u32 reg)
+{
+	return __dw_pcie_read_dbi(pci, pci->atu_base, reg, 0x4);
+}
+
 static inline void dw_pcie_dbi_ro_wr_en(struct dw_pcie *pci)
 {
 	u32 reg;

drivers/pci/controller/dwc/pcie-histb.c

@@ -202,7 +202,7 @@ static int histb_pcie_host_init(struct pcie_port *pp)
 	return 0;
 }
 
-static struct dw_pcie_host_ops histb_pcie_host_ops = {
+static const struct dw_pcie_host_ops histb_pcie_host_ops = {
 	.rd_own_conf = histb_pcie_rd_own_conf,
 	.wr_own_conf = histb_pcie_wr_own_conf,
 	.host_init = histb_pcie_host_init,

drivers/pci/controller/pcie-mediatek.c

@@ -161,7 +161,6 @@ struct mtk_pcie_soc {
  * @obff_ck: pointer to OBFF functional block operating clock
  * @pipe_ck: pointer to LTSSM and PHY/MAC layer operating clock
  * @phy: pointer to PHY control block
- * @lane: lane count
  * @slot: port slot
  * @irq: GIC irq
  * @irq_domain: legacy INTx IRQ domain
@@ -182,7 +181,6 @@ struct mtk_pcie_port {
 	struct clk *obff_ck;
 	struct clk *pipe_ck;
 	struct phy *phy;
-	u32 lane;
 	u32 slot;
 	int irq;
 	struct irq_domain *irq_domain;
@@ -197,29 +195,20 @@ struct mtk_pcie_port {
  * @dev: pointer to PCIe device
  * @base: IO mapped register base
  * @free_ck: free-run reference clock
- * @io: IO resource
- * @pio: PIO resource
  * @mem: non-prefetchable memory resource
- * @busn: bus range
- * @offset: IO / Memory offset
  * @ports: pointer to PCIe port information
  * @soc: pointer to SoC-dependent operations
+ * @busnr: root bus number
  */
 struct mtk_pcie {
 	struct device *dev;
 	void __iomem *base;
 	struct clk *free_ck;
 
-	struct resource io;
-	struct resource pio;
 	struct resource mem;
-	struct resource busn;
-	struct {
-		resource_size_t mem;
-		resource_size_t io;
-	} offset;
 	struct list_head ports;
 	const struct mtk_pcie_soc *soc;
+	unsigned int busnr;
 };
 
 static void mtk_pcie_subsys_powerdown(struct mtk_pcie *pcie)
@@ -904,12 +893,6 @@ static int mtk_pcie_parse_port(struct mtk_pcie *pcie,
 	if (!port)
 		return -ENOMEM;
 
-	err = of_property_read_u32(node, "num-lanes", &port->lane);
-	if (err) {
-		dev_err(dev, "missing num-lanes property\n");
-		return err;
-	}
-
 	snprintf(name, sizeof(name), "port%d", slot);
 	regs = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
 	port->base = devm_ioremap_resource(dev, regs);
@@ -1045,55 +1028,43 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
 	struct device_node *node = dev->of_node, *child;
-	struct of_pci_range_parser parser;
-	struct of_pci_range range;
-	struct resource res;
 	struct mtk_pcie_port *port, *tmp;
+	struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
+	struct list_head *windows = &host->windows;
+	struct resource_entry *win, *tmp_win;
+	resource_size_t io_base;
 	int err;
 
-	if (of_pci_range_parser_init(&parser, node)) {
-		dev_err(dev, "missing \"ranges\" property\n");
-		return -EINVAL;
-	}
+	err = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff,
+						    windows, &io_base);
+	if (err)
+		return err;
 
-	for_each_of_pci_range(&parser, &range) {
-		err = of_pci_range_to_resource(&range, node, &res);
+	err = devm_request_pci_bus_resources(dev, windows);
 	if (err < 0)
 		return err;
 
-		switch (res.flags & IORESOURCE_TYPE_BITS) {
+	/* Get the I/O and memory ranges from DT */
+	resource_list_for_each_entry_safe(win, tmp_win, windows) {
+		switch (resource_type(win->res)) {
 		case IORESOURCE_IO:
-			pcie->offset.io = res.start - range.pci_addr;
-
-			memcpy(&pcie->pio, &res, sizeof(res));
-			pcie->pio.name = node->full_name;
-
-			pcie->io.start = range.cpu_addr;
-			pcie->io.end = range.cpu_addr + range.size - 1;
-			pcie->io.flags = IORESOURCE_MEM;
-			pcie->io.name = "I/O";
-
-			memcpy(&res, &pcie->io, sizeof(res));
+			err = devm_pci_remap_iospace(dev, win->res, io_base);
+			if (err) {
+				dev_warn(dev, "error %d: failed to map resource %pR\n",
+					 err, win->res);
+				resource_list_destroy_entry(win);
+			}
 			break;
-
 		case IORESOURCE_MEM:
-			pcie->offset.mem = res.start - range.pci_addr;
-
-			memcpy(&pcie->mem, &res, sizeof(res));
+			memcpy(&pcie->mem, win->res, sizeof(*win->res));
 			pcie->mem.name = "non-prefetchable";
 			break;
+		case IORESOURCE_BUS:
+			pcie->busnr = win->res->start;
+			break;
 		}
 	}
 
-	err = of_pci_parse_bus_range(node, &pcie->busn);
-	if (err < 0) {
-		dev_err(dev, "failed to parse bus ranges property: %d\n", err);
-		pcie->busn.name = node->name;
-		pcie->busn.start = 0;
-		pcie->busn.end = 0xff;
-		pcie->busn.flags = IORESOURCE_BUS;
-	}
-
 	for_each_available_child_of_node(node, child) {
 		int slot;
 
@@ -1125,28 +1096,6 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 	return 0;
 }
 
-static int mtk_pcie_request_resources(struct mtk_pcie *pcie)
-{
-	struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
-	struct list_head *windows = &host->windows;
-	struct device *dev = pcie->dev;
-	int err;
-
-	pci_add_resource_offset(windows, &pcie->pio, pcie->offset.io);
-	pci_add_resource_offset(windows, &pcie->mem, pcie->offset.mem);
-	pci_add_resource(windows, &pcie->busn);
-
-	err = devm_request_pci_bus_resources(dev, windows);
-	if (err < 0)
-		return err;
-
-	err = devm_pci_remap_iospace(dev, &pcie->pio, pcie->io.start);
-	if (err)
-		return err;
-
-	return 0;
-}
-
 static int mtk_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1169,11 +1118,7 @@ static int mtk_pcie_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	err = mtk_pcie_request_resources(pcie);
-	if (err)
-		goto put_resources;
-
-	host->busnr = pcie->busn.start;
+	host->busnr = pcie->busnr;
 	host->dev.parent = pcie->dev;
 	host->ops = pcie->soc->ops;
 	host->map_irq = of_irq_parse_and_map_pci;

drivers/pci/iov.c

@@ -252,6 +252,27 @@ int __weak pcibios_sriov_disable(struct pci_dev *pdev)
 	return 0;
 }
 
+static int sriov_add_vfs(struct pci_dev *dev, u16 num_vfs)
+{
+	unsigned int i;
+	int rc;
+
+	if (dev->no_vf_scan)
+		return 0;
+
+	for (i = 0; i < num_vfs; i++) {
+		rc = pci_iov_add_virtfn(dev, i);
+		if (rc)
+			goto failed;
+	}
+	return 0;
+failed:
+	while (i--)
+		pci_iov_remove_virtfn(dev, i);
+
+	return rc;
+}
+
 static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 {
 	int rc;
@@ -337,21 +358,15 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 	msleep(100);
 	pci_cfg_access_unlock(dev);
 
-	for (i = 0; i < initial; i++) {
-		rc = pci_iov_add_virtfn(dev, i);
+	rc = sriov_add_vfs(dev, initial);
 	if (rc)
-			goto failed;
-	}
+		goto err_pcibios;
 
 	kobject_uevent(&dev->dev.kobj, KOBJ_CHANGE);
 	iov->num_VFs = nr_virtfn;
 
 	return 0;
 
-failed:
-	while (i--)
-		pci_iov_remove_virtfn(dev, i);
-
 err_pcibios:
 	iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
 	pci_cfg_access_lock(dev);
@@ -368,17 +383,26 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
 	return rc;
 }
 
-static void sriov_disable(struct pci_dev *dev)
+static void sriov_del_vfs(struct pci_dev *dev)
 {
-	int i;
 	struct pci_sriov *iov = dev->sriov;
+	int i;
 
-	if (!iov->num_VFs)
+	if (dev->no_vf_scan)
 		return;
 
 	for (i = 0; i < iov->num_VFs; i++)
 		pci_iov_remove_virtfn(dev, i);
+}
+
+static void sriov_disable(struct pci_dev *dev)
+{
+	struct pci_sriov *iov = dev->sriov;
+
+	if (!iov->num_VFs)
+		return;
 
+	sriov_del_vfs(dev);
 	iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
 	pci_cfg_access_lock(dev);
 	pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);

drivers/pci/p2pdma.c

@@ -416,7 +416,7 @@ static int upstream_bridge_distance_warn(struct pci_dev *provider,
  *
  * Returns -1 if any of the clients are not compatible (behind the same
  * root port as the provider), otherwise returns a positive number where
- * a lower number is the preferrable choice. (If there's one client
+ * a lower number is the preferable choice. (If there's one client
  * that's the same as the provider it will return 0, which is best choice).
  *
  * For now, "compatible" means the provider and the clients are all behind
@@ -487,7 +487,7 @@ EXPORT_SYMBOL_GPL(pci_has_p2pmem);
  * @num_clients: number of client devices in the list
  *
  * If multiple devices are behind the same switch, the one "closest" to the
- * client devices in use will be chosen first. (So if one of the providers are
+ * client devices in use will be chosen first. (So if one of the providers is
  * the same as one of the clients, that provider will be used ahead of any
  * other providers that are unrelated). If multiple providers are an equal
  * distance away, one will be chosen at random.
@@ -574,7 +574,7 @@ EXPORT_SYMBOL_GPL(pci_alloc_p2pmem);
  * pci_free_p2pmem - free peer-to-peer DMA memory
  * @pdev: the device the memory was allocated from
  * @addr: address of the memory that was allocated
- * @size: number of bytes that was allocated
+ * @size: number of bytes that were allocated
  */
 void pci_free_p2pmem(struct pci_dev *pdev, void *addr, size_t size)
 {
@@ -611,7 +611,7 @@ EXPORT_SYMBOL_GPL(pci_p2pmem_virt_to_bus);
  * @nents: the number of SG entries in the list
  * @length: number of bytes to allocate
  *
- * Returns 0 on success
+ * Return: %NULL on error or &struct scatterlist pointer and @nents on success
  */
 struct scatterlist *pci_p2pmem_alloc_sgl(struct pci_dev *pdev,
 					 unsigned int *nents, u32 length)
@@ -667,7 +667,7 @@ EXPORT_SYMBOL_GPL(pci_p2pmem_free_sgl);
  *
  * Published memory can be used by other PCI device drivers for
  * peer-2-peer DMA operations. Non-published memory is reserved for
- * exlusive use of the device driver that registers the peer-to-peer
+ * exclusive use of the device driver that registers the peer-to-peer
  * memory.
  */
 void pci_p2pmem_publish(struct pci_dev *pdev, bool publish)
@@ -727,7 +727,7 @@ EXPORT_SYMBOL_GPL(pci_p2pdma_map_sg);
  * @use_p2pdma: returns whether to enable p2pdma or not
  *
  * Parses an attribute value to decide whether to enable p2pdma.
- * The value can select a PCI device (using it's full BDF device
+ * The value can select a PCI device (using its full BDF device
  * name) or a boolean (in any format strtobool() accepts). A false
  * value disables p2pdma, a true value expects the caller
  * to automatically find a compatible device and specifying a PCI device
@@ -778,7 +778,7 @@ EXPORT_SYMBOL_GPL(pci_p2pdma_enable_store);
  *		whether p2pdma is enabled
  * @page: contents of the stored value
  * @p2p_dev: the selected p2p device (NULL if no device is selected)
- * @use_p2pdma: whether p2pdme has been enabled
+ * @use_p2pdma: whether p2pdma has been enabled
  *
  * Attributes that use pci_p2pdma_enable_store() should use this function
  * to show the value of the attribute.

drivers/pci/pci-driver.c

@@ -1251,30 +1251,29 @@ static int pci_pm_runtime_suspend(struct device *dev)
 		return 0;
 	}
 
-	if (!pm || !pm->runtime_suspend)
-		return -ENOSYS;
-
 	pci_dev->state_saved = false;
+	if (pm && pm->runtime_suspend) {
 		error = pm->runtime_suspend(dev);
-	if (error) {
 		/*
 		 * -EBUSY and -EAGAIN is used to request the runtime PM core
 		 * to schedule a new suspend, so log the event only with debug
 		 * log level.
 		 */
-		if (error == -EBUSY || error == -EAGAIN)
+		if (error == -EBUSY || error == -EAGAIN) {
 			dev_dbg(dev, "can't suspend now (%pf returned %d)\n",
 				pm->runtime_suspend, error);
-		else
+			return error;
+		} else if (error) {
 			dev_err(dev, "can't suspend (%pf returned %d)\n",
 				pm->runtime_suspend, error);
-
 			return error;
 		}
+	}
 
 	pci_fixup_device(pci_fixup_suspend, pci_dev);
 
-	if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
+	if (pm && pm->runtime_suspend
+	    && !pci_dev->state_saved && pci_dev->current_state != PCI_D0
 	    && pci_dev->current_state != PCI_UNKNOWN) {
 		WARN_ONCE(pci_dev->current_state != prev,
 			"PCI PM: State of device not saved by %pF\n",
@@ -1292,7 +1291,7 @@ static int pci_pm_runtime_suspend(struct device *dev)
 
 static int pci_pm_runtime_resume(struct device *dev)
 {
-	int rc;
+	int rc = 0;
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
@@ -1306,13 +1305,11 @@ static int pci_pm_runtime_resume(struct device *dev)
 	if (!pci_dev->driver)
 		return 0;
 
-	if (!pm || !pm->runtime_resume)
-		return -ENOSYS;
-
 	pci_fixup_device(pci_fixup_resume_early, pci_dev);
 	pci_enable_wake(pci_dev, PCI_D0, false);
 	pci_fixup_device(pci_fixup_resume, pci_dev);
 
+	if (pm && pm->runtime_resume)
 		rc = pm->runtime_resume(dev);
 
 	pci_dev->runtime_d3cold = false;

drivers/pci/pci.h

@@ -2,6 +2,8 @@
 #ifndef DRIVERS_PCI_H
 #define DRIVERS_PCI_H
 
+#include <linux/pci.h>
+
 #define PCI_FIND_CAP_TTL	48
 
 #define PCI_VSEC_ID_INTEL_TBT	0x1234	/* Thunderbolt */

drivers/pci/pcie/aspm.c

@@ -53,8 +53,6 @@ struct pcie_link_state {
 	struct pcie_link_state *root;	/* pointer to the root port link */
 	struct pcie_link_state *parent;	/* pointer to the parent Link state */
 	struct list_head sibling;	/* node in link_list */
-	struct list_head children;	/* list of child link states */
-	struct list_head link;		/* node in parent's children list */
 
 	/* ASPM state */
 	u32 aspm_support:7;		/* Supported ASPM state */
@@ -850,8 +848,6 @@ static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
 		return NULL;
 
 	INIT_LIST_HEAD(&link->sibling);
-	INIT_LIST_HEAD(&link->children);
-	INIT_LIST_HEAD(&link->link);
 	link->pdev = pdev;
 	link->downstream = pci_function_0(pdev->subordinate);
 
@@ -877,7 +873,6 @@ static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
 
 		link->parent = parent;
 		link->root = link->parent->root;
-		list_add(&link->link, &parent->children);
 	}
 
 	list_add(&link->sibling, &link_list);
@@ -1001,7 +996,6 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
 	/* All functions are removed, so just disable ASPM for the link */
 	pcie_config_aspm_link(link, 0);
 	list_del(&link->sibling);
-	list_del(&link->link);
 	/* Clock PM is for endpoint device */
 	free_link_state(link);
 

drivers/pci/pcie/portdrv.h

@@ -71,19 +71,19 @@ static inline void *get_service_data(struct pcie_device *dev)
 
 struct pcie_port_service_driver {
 	const char *name;
-	int (*probe) (struct pcie_device *dev);
-	void (*remove) (struct pcie_device *dev);
-	int (*suspend) (struct pcie_device *dev);
-	int (*resume_noirq) (struct pcie_device *dev);
-	int (*resume) (struct pcie_device *dev);
-	int (*runtime_suspend) (struct pcie_device *dev);
-	int (*runtime_resume) (struct pcie_device *dev);
+	int (*probe)(struct pcie_device *dev);
+	void (*remove)(struct pcie_device *dev);
+	int (*suspend)(struct pcie_device *dev);
+	int (*resume_noirq)(struct pcie_device *dev);
+	int (*resume)(struct pcie_device *dev);
+	int (*runtime_suspend)(struct pcie_device *dev);
+	int (*runtime_resume)(struct pcie_device *dev);
 
 	/* Device driver may resume normal operations */
 	void (*error_resume)(struct pci_dev *dev);
 
 	/* Link Reset Capability - AER service driver specific */
-	pci_ers_result_t (*reset_link) (struct pci_dev *dev);
+	pci_ers_result_t (*reset_link)(struct pci_dev *dev);
 
 	int port_type;  /* Type of the port this driver can handle */
 	u32 service;    /* Port service this device represents */

drivers/pci/quirks.c

@@ -618,6 +618,30 @@ static void quirk_amd_nl_class(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB,
 		quirk_amd_nl_class);
 
+/*
+ * Synopsys USB 3.x host HAPS platform has a class code of
+ * PCI_CLASS_SERIAL_USB_XHCI, and xhci driver can claim it.  However, these
+ * devices should use dwc3-haps driver.  Change these devices' class code to
+ * PCI_CLASS_SERIAL_USB_DEVICE to prevent the xhci-pci driver from claiming
+ * them.
+ */
+static void quirk_synopsys_haps(struct pci_dev *pdev)
+{
+	u32 class = pdev->class;
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3:
+	case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI:
+	case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31:
+		pdev->class = PCI_CLASS_SERIAL_USB_DEVICE;
+		pci_info(pdev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n",
+			 class, pdev->class);
+		break;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SYNOPSYS, PCI_ANY_ID,
+			 quirk_synopsys_haps);
+
 /*
  * Let's make the southbridge information explicit instead of having to
  * worry about people probing the ACPI areas, for example.. (Yes, it

drivers/pci/switch/switchtec.c

@@ -13,7 +13,7 @@
 #include <linux/uaccess.h>
 #include <linux/poll.h>
 #include <linux/wait.h>
-
+#include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/nospec.h>
 
 MODULE_DESCRIPTION("Microsemi Switchtec(tm) PCIe Management Driver");
@@ -25,6 +25,11 @@ static int max_devices = 16;
 module_param(max_devices, int, 0644);
 MODULE_PARM_DESC(max_devices, "max number of switchtec device instances");
 
+static bool use_dma_mrpc = 1;
+module_param(use_dma_mrpc, bool, 0644);
+MODULE_PARM_DESC(use_dma_mrpc,
+		 "Enable the use of the DMA MRPC feature");
+
 static dev_t switchtec_devt;
 static DEFINE_IDA(switchtec_minor_ida);
 
@@ -113,6 +118,19 @@ static void stuser_set_state(struct switchtec_user *stuser,
 
 static void mrpc_complete_cmd(struct switchtec_dev *stdev);
 
+static void flush_wc_buf(struct switchtec_dev *stdev)
+{
+	struct ntb_dbmsg_regs __iomem *mmio_dbmsg;
+
+	/*
+	 * odb (outbound doorbell) register is processed by low latency
+	 * hardware and w/o side effect
+	 */
+	mmio_dbmsg = (void __iomem *)stdev->mmio_ntb +
+		SWITCHTEC_NTB_REG_DBMSG_OFFSET;
+	ioread32(&mmio_dbmsg->odb);
+}
+
 static void mrpc_cmd_submit(struct switchtec_dev *stdev)
 {
 	/* requires the mrpc_mutex to already be held when called */
@@ -128,16 +146,18 @@ static void mrpc_cmd_submit(struct switchtec_dev *stdev)
 	stuser = list_entry(stdev->mrpc_queue.next, struct switchtec_user,
 			    list);
 
+	if (stdev->dma_mrpc) {
+		stdev->dma_mrpc->status = SWITCHTEC_MRPC_STATUS_INPROGRESS;
+		memset(stdev->dma_mrpc->data, 0xFF, SWITCHTEC_MRPC_PAYLOAD_SIZE);
+	}
+
 	stuser_set_state(stuser, MRPC_RUNNING);
 	stdev->mrpc_busy = 1;
 	memcpy_toio(&stdev->mmio_mrpc->input_data,
 		    stuser->data, stuser->data_len);
+	flush_wc_buf(stdev);
 	iowrite32(stuser->cmd, &stdev->mmio_mrpc->cmd);
 
-	stuser->status = ioread32(&stdev->mmio_mrpc->status);
-	if (stuser->status != SWITCHTEC_MRPC_STATUS_INPROGRESS)
-		mrpc_complete_cmd(stdev);
-
 	schedule_delayed_work(&stdev->mrpc_timeout,
 			      msecs_to_jiffies(500));
 }
@@ -170,7 +190,11 @@ static void mrpc_complete_cmd(struct switchtec_dev *stdev)
 	stuser = list_entry(stdev->mrpc_queue.next, struct switchtec_user,
 			    list);
 
+	if (stdev->dma_mrpc)
+		stuser->status = stdev->dma_mrpc->status;
+	else
 		stuser->status = ioread32(&stdev->mmio_mrpc->status);
+
 	if (stuser->status == SWITCHTEC_MRPC_STATUS_INPROGRESS)
 		return;
 
@@ -180,13 +204,19 @@ static void mrpc_complete_cmd(struct switchtec_dev *stdev)
 	if (stuser->status != SWITCHTEC_MRPC_STATUS_DONE)
 		goto out;
 
+	if (stdev->dma_mrpc)
+		stuser->return_code = stdev->dma_mrpc->rtn_code;
+	else
 		stuser->return_code = ioread32(&stdev->mmio_mrpc->ret_value);
 	if (stuser->return_code != 0)
 		goto out;
 
+	if (stdev->dma_mrpc)
+		memcpy(stuser->data, &stdev->dma_mrpc->data,
+			      stuser->read_len);
+	else
 		memcpy_fromio(stuser->data, &stdev->mmio_mrpc->output_data,
 			      stuser->read_len);
-
 out:
 	complete_all(&stuser->comp);
 	list_del_init(&stuser->list);
@@ -221,6 +251,9 @@ static void mrpc_timeout_work(struct work_struct *work)
 
 	mutex_lock(&stdev->mrpc_mutex);
 
+	if (stdev->dma_mrpc)
+		status = stdev->dma_mrpc->status;
+	else
 		status = ioread32(&stdev->mmio_mrpc->status);
 	if (status == SWITCHTEC_MRPC_STATUS_INPROGRESS) {
 		schedule_delayed_work(&stdev->mrpc_timeout,
@@ -229,7 +262,6 @@ static void mrpc_timeout_work(struct work_struct *work)
 	}
 
 	mrpc_complete_cmd(stdev);
-
 out:
 	mutex_unlock(&stdev->mrpc_mutex);
 }
@@ -800,6 +832,7 @@ static int ioctl_event_ctl(struct switchtec_dev *stdev,
 {
 	int ret;
 	int nr_idxs;
+	unsigned int event_flags;
 	struct switchtec_ioctl_event_ctl ctl;
 
 	if (copy_from_user(&ctl, uctl, sizeof(ctl)))
@@ -821,7 +854,9 @@ static int ioctl_event_ctl(struct switchtec_dev *stdev,
 		else
 			return -EINVAL;
 
+		event_flags = ctl.flags;
 		for (ctl.index = 0; ctl.index < nr_idxs; ctl.index++) {
+			ctl.flags = event_flags;
 			ret = event_ctl(stdev, &ctl);
 			if (ret < 0)
 				return ret;
@@ -1017,10 +1052,24 @@ static void enable_link_state_events(struct switchtec_dev *stdev)
 	}
 }
 
+static void enable_dma_mrpc(struct switchtec_dev *stdev)
+{
+	writeq(stdev->dma_mrpc_dma_addr, &stdev->mmio_mrpc->dma_addr);
+	flush_wc_buf(stdev);
+	iowrite32(SWITCHTEC_DMA_MRPC_EN, &stdev->mmio_mrpc->dma_en);
+}
+
 static void stdev_release(struct device *dev)
 {
 	struct switchtec_dev *stdev = to_stdev(dev);
 
+	if (stdev->dma_mrpc) {
+		iowrite32(0, &stdev->mmio_mrpc->dma_en);
+		flush_wc_buf(stdev);
+		writeq(0, &stdev->mmio_mrpc->dma_addr);
+		dma_free_coherent(&stdev->pdev->dev, sizeof(*stdev->dma_mrpc),
+				stdev->dma_mrpc, stdev->dma_mrpc_dma_addr);
+	}
 	kfree(stdev);
 }
 
@@ -1176,10 +1225,27 @@ static irqreturn_t switchtec_event_isr(int irq, void *dev)
 	return ret;
 }
 
+
+static irqreturn_t switchtec_dma_mrpc_isr(int irq, void *dev)
+{
+	struct switchtec_dev *stdev = dev;
+	irqreturn_t ret = IRQ_NONE;
+
+	iowrite32(SWITCHTEC_EVENT_CLEAR |
+		  SWITCHTEC_EVENT_EN_IRQ,
+		  &stdev->mmio_part_cfg->mrpc_comp_hdr);
+	schedule_work(&stdev->mrpc_work);
+
+	ret = IRQ_HANDLED;
+	return ret;
+}
+
 static int switchtec_init_isr(struct switchtec_dev *stdev)
 {
 	int nvecs;
 	int event_irq;
+	int dma_mrpc_irq;
+	int rc;
 
 	nvecs = pci_alloc_irq_vectors(stdev->pdev, 1, 4,
 				      PCI_IRQ_MSIX | PCI_IRQ_MSI);
@@ -1194,9 +1260,29 @@ static int switchtec_init_isr(struct switchtec_dev *stdev)
 	if (event_irq < 0)
 		return event_irq;
 
-	return devm_request_irq(&stdev->pdev->dev, event_irq,
+	rc = devm_request_irq(&stdev->pdev->dev, event_irq,
 				switchtec_event_isr, 0,
 				KBUILD_MODNAME, stdev);
+
+	if (rc)
+		return rc;
+
+	if (!stdev->dma_mrpc)
+		return rc;
+
+	dma_mrpc_irq = ioread32(&stdev->mmio_mrpc->dma_vector);
+	if (dma_mrpc_irq < 0 || dma_mrpc_irq >= nvecs)
+		return -EFAULT;
+
+	dma_mrpc_irq  = pci_irq_vector(stdev->pdev, dma_mrpc_irq);
+	if (dma_mrpc_irq < 0)
+		return dma_mrpc_irq;
+
+	rc = devm_request_irq(&stdev->pdev->dev, dma_mrpc_irq,
+				switchtec_dma_mrpc_isr, 0,
+				KBUILD_MODNAME, stdev);
+
+	return rc;
 }
 
 static void init_pff(struct switchtec_dev *stdev)
@@ -1232,19 +1318,38 @@ static int switchtec_init_pci(struct switchtec_dev *stdev,
 			      struct pci_dev *pdev)
 {
 	int rc;
+	void __iomem *map;
+	unsigned long res_start, res_len;
 
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
 
-	rc = pcim_iomap_regions(pdev, 0x1, KBUILD_MODNAME);
+	rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
 	if (rc)
 		return rc;
 
 	pci_set_master(pdev);
 
-	stdev->mmio = pcim_iomap_table(pdev)[0];
-	stdev->mmio_mrpc = stdev->mmio + SWITCHTEC_GAS_MRPC_OFFSET;
+	res_start = pci_resource_start(pdev, 0);
+	res_len = pci_resource_len(pdev, 0);
+
+	if (!devm_request_mem_region(&pdev->dev, res_start,
+				     res_len, KBUILD_MODNAME))
+		return -EBUSY;
+
+	stdev->mmio_mrpc = devm_ioremap_wc(&pdev->dev, res_start,
+					   SWITCHTEC_GAS_TOP_CFG_OFFSET);
+	if (!stdev->mmio_mrpc)
+		return -ENOMEM;
+
+	map = devm_ioremap(&pdev->dev,
+			   res_start + SWITCHTEC_GAS_TOP_CFG_OFFSET,
+			   res_len - SWITCHTEC_GAS_TOP_CFG_OFFSET);
+	if (!map)
+		return -ENOMEM;
+
+	stdev->mmio = map - SWITCHTEC_GAS_TOP_CFG_OFFSET;
 	stdev->mmio_sw_event = stdev->mmio + SWITCHTEC_GAS_SW_EVENT_OFFSET;
 	stdev->mmio_sys_info = stdev->mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET;
 	stdev->mmio_flash_info = stdev->mmio + SWITCHTEC_GAS_FLASH_INFO_OFFSET;
@@ -1262,6 +1367,19 @@ static int switchtec_init_pci(struct switchtec_dev *stdev,
 
 	pci_set_drvdata(pdev, stdev);
 
+	if (!use_dma_mrpc)
+		return 0;
+
+	if (ioread32(&stdev->mmio_mrpc->dma_ver) == 0)
+		return 0;
+
+	stdev->dma_mrpc = dma_zalloc_coherent(&stdev->pdev->dev,
+					      sizeof(*stdev->dma_mrpc),
+					      &stdev->dma_mrpc_dma_addr,
+					      GFP_KERNEL);
+	if (stdev->dma_mrpc == NULL)
+		return -ENOMEM;
+
 	return 0;
 }
 
@@ -1293,6 +1411,9 @@ static int switchtec_pci_probe(struct pci_dev *pdev,
 		  &stdev->mmio_part_cfg->mrpc_comp_hdr);
 	enable_link_state_events(stdev);
 
+	if (stdev->dma_mrpc)
+		enable_dma_mrpc(stdev);
+
 	rc = cdev_device_add(&stdev->cdev, &stdev->dev);
 	if (rc)
 		goto err_devadd;
@@ -1318,7 +1439,6 @@ static void switchtec_pci_remove(struct pci_dev *pdev)
 	cdev_device_del(&stdev->cdev, &stdev->dev);
 	ida_simple_remove(&switchtec_minor_ida, MINOR(stdev->dev.devt));
 	dev_info(&stdev->dev, "unregistered.\n");
-
 	stdev_kill(stdev);
 	put_device(&stdev->dev);
 }

drivers/usb/dwc3/dwc3-haps.c

@@ -15,10 +15,6 @@
 #include <linux/platform_device.h>
 #include <linux/property.h>
 
-#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3		0xabcd
-#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI	0xabce
-#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31	0xabcf
-
 /**
  * struct dwc3_haps - Driver private structure
  * @dwc3: child dwc3 platform_device

include/linux/mfd/syscon/imx6q-iomuxc-gpr.h

@@ -440,6 +440,7 @@
 #define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK			(0x1 << 1)
 
 #define IMX6SX_GPR12_PCIE_TEST_POWERDOWN		BIT(30)
+#define IMX6SX_GPR12_PCIE_PM_TURN_OFF			BIT(16)
 #define IMX6SX_GPR12_PCIE_RX_EQ_MASK			(0x7 << 0)
 #define IMX6SX_GPR12_PCIE_RX_EQ_2			(0x2 << 0)
 

include/linux/pci.h

@@ -413,6 +413,7 @@ struct pci_dev {
 	unsigned int	non_compliant_bars:1;	/* Broken BARs; ignore them */
 	unsigned int	is_probed:1;		/* Device probing in progress */
 	unsigned int	link_active_reporting:1;/* Device capable of reporting link active */
+	unsigned int	no_vf_scan:1;		/* Don't scan for VFs after IOV enablement */
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */
 
@@ -772,9 +773,9 @@ struct pci_driver {
 	int  (*suspend)(struct pci_dev *dev, pm_message_t state);	/* Device suspended */
 	int  (*suspend_late)(struct pci_dev *dev, pm_message_t state);
 	int  (*resume_early)(struct pci_dev *dev);
-	int  (*resume) (struct pci_dev *dev);	/* Device woken up */
-	void (*shutdown) (struct pci_dev *dev);
-	int  (*sriov_configure) (struct pci_dev *dev, int num_vfs); /* On PF */
+	int  (*resume)(struct pci_dev *dev);	/* Device woken up */
+	void (*shutdown)(struct pci_dev *dev);
+	int  (*sriov_configure)(struct pci_dev *dev, int num_vfs); /* On PF */
 	const struct pci_error_handlers *err_handler;
 	const struct attribute_group **groups;
 	struct device_driver	driver;

include/linux/pci_ids.h

@@ -2361,6 +2361,9 @@
 #define PCI_DEVICE_ID_CENATEK_IDE	0x0001
 
 #define PCI_VENDOR_ID_SYNOPSYS		0x16c3
+#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3		0xabcd
+#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI	0xabce
+#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31	0xabcf
 
 #define PCI_VENDOR_ID_USR		0x16ec
 

include/linux/switchtec.h

@@ -29,6 +29,7 @@
 #define SWITCHTEC_EVENT_EN_IRQ   BIT(3)
 #define SWITCHTEC_EVENT_FATAL    BIT(4)
 
+#define SWITCHTEC_DMA_MRPC_EN	BIT(0)
 enum {
 	SWITCHTEC_GAS_MRPC_OFFSET       = 0x0000,
 	SWITCHTEC_GAS_TOP_CFG_OFFSET    = 0x1000,
@@ -46,6 +47,10 @@ struct mrpc_regs {
 	u32 cmd;
 	u32 status;
 	u32 ret_value;
+	u32 dma_en;
+	u64 dma_addr;
+	u32 dma_vector;
+	u32 dma_ver;
 } __packed;
 
 enum mrpc_status {
@@ -342,6 +347,14 @@ struct pff_csr_regs {
 
 struct switchtec_ntb;
 
+struct dma_mrpc_output {
+	u32 status;
+	u32 cmd_id;
+	u32 rtn_code;
+	u32 output_size;
+	u8 data[SWITCHTEC_MRPC_PAYLOAD_SIZE];
+};
+
 struct switchtec_dev {
 	struct pci_dev *pdev;
 	struct device dev;
@@ -381,6 +394,9 @@ struct switchtec_dev {
 	u8 link_event_count[SWITCHTEC_MAX_PFF_CSR];
 
 	struct switchtec_ntb *sndev;
+
+	struct dma_mrpc_output *dma_mrpc;
+	dma_addr_t dma_mrpc_dma_addr;
 };
 
 static inline struct switchtec_dev *to_stdev(struct device *dev)