tpm_infineon: fix suspend/resume handler for pnp_driver

When suspending, tpm_infineon calls the generic suspend function of the
TPM framework.  However, the TPM framework does not return and the system
hangs upon suspend.  When sending the necessary command "TPM_SaveState"
directly within the driver, suspending and resuming works fine.
Signed-off-by: Marcel Selhorst <m.selhorst@sirrix.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Debora Velarde <debora@linux.vnet.ibm.com>
Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: <stable@kernel.org>		[2.6.32.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/tpm/tpm_infineon.c

@@ -406,14 +406,14 @@ static const struct tpm_vendor_specific tpm_inf = {
 	.miscdev = {.fops = &inf_ops,},
 };
 
-static const struct pnp_device_id tpm_pnp_tbl[] = {
+static const struct pnp_device_id tpm_inf_pnp_tbl[] = {
 	/* Infineon TPMs */
 	{"IFX0101", 0},
 	{"IFX0102", 0},
 	{"", 0}
 };
 
-MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
+MODULE_DEVICE_TABLE(pnp, tpm_inf_pnp_tbl);
 
 static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 				       const struct pnp_device_id *dev_id)
@@ -607,20 +607,55 @@ static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev)
 			iounmap(tpm_dev.mem_base);
 			release_mem_region(tpm_dev.map_base, tpm_dev.map_size);
 		}
+		tpm_dev_vendor_release(chip);
 		tpm_remove_hardware(chip->dev);
 	}
 }
 
+static int tpm_inf_pnp_suspend(struct pnp_dev *dev, pm_message_t pm_state)
+{
+	struct tpm_chip *chip = pnp_get_drvdata(dev);
+	int rc;
+	if (chip) {
+		u8 savestate[] = {
+			0, 193,	/* TPM_TAG_RQU_COMMAND */
+			0, 0, 0, 10,	/* blob length (in bytes) */
+			0, 0, 0, 152	/* TPM_ORD_SaveState */
+		};
+		dev_info(&dev->dev, "saving TPM state\n");
+		rc = tpm_inf_send(chip, savestate, sizeof(savestate));
+		if (rc < 0) {
+			dev_err(&dev->dev, "error while saving TPM state\n");
+			return rc;
+		}
+	}
+	return 0;
+}
+
+static int tpm_inf_pnp_resume(struct pnp_dev *dev)
+{
+	/* Re-configure TPM after suspending */
+	tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR);
+	tpm_config_out(IOLIMH, TPM_INF_ADDR);
+	tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA);
+	tpm_config_out(IOLIML, TPM_INF_ADDR);
+	tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA);
+	/* activate register */
+	tpm_config_out(TPM_DAR, TPM_INF_ADDR);
+	tpm_config_out(0x01, TPM_INF_DATA);
+	tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
+	/* disable RESET, LP and IRQC */
+	tpm_data_out(RESET_LP_IRQC_DISABLE, CMD);
+	return tpm_pm_resume(&dev->dev);
+}
+
 static struct pnp_driver tpm_inf_pnp_driver = {
 	.name = "tpm_inf_pnp",
-	.driver = {
-		.owner = THIS_MODULE,
-		.suspend = tpm_pm_suspend,
-		.resume = tpm_pm_resume,
-	},
-	.id_table = tpm_pnp_tbl,
+	.id_table = tpm_inf_pnp_tbl,
 	.probe = tpm_inf_pnp_probe,
-	.remove = __devexit_p(tpm_inf_pnp_remove),
+	.suspend = tpm_inf_pnp_suspend,
+	.resume = tpm_inf_pnp_resume,
+	.remove = __devexit_p(tpm_inf_pnp_remove)
 };
 
 static int __init init_inf(void)
@@ -638,5 +673,5 @@ module_exit(cleanup_inf);
 
 MODULE_AUTHOR("Marcel Selhorst <m.selhorst@sirrix.com>");
 MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
-MODULE_VERSION("1.9");
+MODULE_VERSION("1.9.2");
 MODULE_LICENSE("GPL");