Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (11652): au0828: fix kernel oops regression on USB disconnect.
  V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express
  V4L/DVB (11612): mx3_camera: Fix compilation with CONFIG_PM
  V4L/DVB (11570): patch: s2255drv: fix race condition on set mode
  V4L/DVB (11568): cx18: Fix the handling of i2c bus registration error
  V4L/DVB (11561a): move media after i2c
  V4L/DVB (11516): drivers/media/video/saa5246a.c: fix use-after-free
  V4L/DVB (11515): drivers/media/video/saa5249.c: fix use-after-free and leak
  V4L/DVB (11494a): cx231xx Kconfig fixes
  V4L/DVB (11494): cx18: Send correct input routing value to external audio multiplexers

drivers/Makefile

@@ -36,7 +36,7 @@ obj-$(CONFIG_FB_INTEL)          += video/intelfb/
 
 obj-y				+= serial/
 obj-$(CONFIG_PARPORT)		+= parport/
-obj-y				+= base/ block/ misc/ mfd/ media/
+obj-y				+= base/ block/ misc/ mfd/
 obj-$(CONFIG_NUBUS)		+= nubus/
 obj-y				+= macintosh/
 obj-$(CONFIG_IDE)		+= ide/
@@ -71,7 +71,7 @@ obj-$(CONFIG_GAMEPORT)		+= input/gameport/
 obj-$(CONFIG_INPUT)		+= input/
 obj-$(CONFIG_I2O)		+= message/
 obj-$(CONFIG_RTC_LIB)		+= rtc/
-obj-y				+= i2c/
+obj-y				+= i2c/ media/
 obj-$(CONFIG_W1)		+= w1/
 obj-$(CONFIG_POWER_SUPPLY)	+= power/
 obj-$(CONFIG_HWMON)		+= hwmon/

drivers/media/video/au0828/au0828-core.c

@@ -192,8 +192,6 @@ static int au0828_usb_probe(struct usb_interface *interface,
 	dev->usbdev = usbdev;
 	dev->boardnr = id->driver_info;
 
-	usb_set_intfdata(interface, dev);
-
 	/* Create the v4l2_device */
 	retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
 	if (retval) {
@@ -222,6 +220,10 @@ static int au0828_usb_probe(struct usb_interface *interface,
 	/* Digital TV */
 	au0828_dvb_register(dev);
 
+	/* Store the pointer to the au0828_dev so it can be accessed in
+	   au0828_usb_disconnect */
+	usb_set_intfdata(interface, dev);
+
 	printk(KERN_INFO "Registered device AU0828 [%s]\n",
 		dev->board.name == NULL ? "Unset" : dev->board.name);
 

drivers/media/video/cx18/cx18-audio.c

@@ -44,7 +44,7 @@ int cx18_audio_set_io(struct cx18 *cx)
 
 	/* handle muxer chips */
 	v4l2_subdev_call(cx->sd_extmux, audio, s_routing,
-			in->audio_input, 0, 0);
+			 (u32) in->muxer_input, 0, 0);
 
 	err = cx18_call_hw_err(cx, cx->card->hw_audio_ctrl,
 			       audio, s_routing, in->audio_input, 0, 0);

drivers/media/video/cx18/cx18-i2c.c

@@ -211,7 +211,7 @@ static struct i2c_algo_bit_data cx18_i2c_algo_template = {
 /* init + register i2c algo-bit adapter */
 int init_cx18_i2c(struct cx18 *cx)
 {
-	int i;
+	int i, err;
 	CX18_DEBUG_I2C("i2c init\n");
 
 	for (i = 0; i < 2; i++) {
@@ -268,8 +268,18 @@ int init_cx18_i2c(struct cx18 *cx)
 	cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
 		     core, reset, (u32) CX18_GPIO_RESET_I2C);
 
-	return i2c_bit_add_bus(&cx->i2c_adap[0]) ||
-		i2c_bit_add_bus(&cx->i2c_adap[1]);
+	err = i2c_bit_add_bus(&cx->i2c_adap[0]);
+	if (err)
+		goto err;
+	err = i2c_bit_add_bus(&cx->i2c_adap[1]);
+	if (err)
+		goto err_del_bus_0;
+	return 0;
+
+ err_del_bus_0:
+	i2c_del_adapter(&cx->i2c_adap[0]);
+ err:
+	return err;
 }
 
 void exit_cx18_i2c(struct cx18 *cx)

drivers/media/video/cx231xx/Kconfig

@@ -6,7 +6,6 @@ config VIDEO_CX231XX
 	select VIDEO_IR
 	select VIDEOBUF_VMALLOC
 	select VIDEO_CX25840
-       select VIDEO_CX231XX_ALSA
 
 	---help---
 	  This is a video4linux driver for Conexant 231xx USB based TV cards.
@@ -30,6 +29,7 @@ config VIDEO_CX231XX_DVB
 	depends on VIDEO_CX231XX && DVB_CORE
 	select VIDEOBUF_DVB
 	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
+
 	---help---
 	  This adds support for DVB cards based on the
 	  Conexant cx231xx chips.

drivers/media/video/cx23885/cx23885-cards.c

@@ -441,9 +441,9 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 	case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
 		/* Two identical tuners on two different i2c buses,
 		 * we need to reset the correct gpio. */
-		if (port->nr == 0)
+		if (port->nr == 1)
 			bitmask = 0x01;
-		else if (port->nr == 1)
+		else if (port->nr == 2)
 			bitmask = 0x04;
 		break;
 	}

drivers/media/video/cx23885/cx23885-dvb.c

@@ -314,6 +314,7 @@ static struct zl10353_config dvico_fusionhdtv_xc3028 = {
 	.demod_address = 0x0f,
 	.if2           = 45600,
 	.no_tuner      = 1,
+	.disable_i2c_gate_ctrl = 1,
 };
 
 static struct stv0900_config netup_stv0900_config = {

drivers/media/video/mx3_camera.c

@@ -1063,10 +1063,6 @@ static struct soc_camera_host_ops mx3_soc_camera_host_ops = {
 	.owner		= THIS_MODULE,
 	.add		= mx3_camera_add_device,
 	.remove		= mx3_camera_remove_device,
-#ifdef CONFIG_PM
-	.suspend	= mx3_camera_suspend,
-	.resume		= mx3_camera_resume,
-#endif
 	.set_crop	= mx3_camera_set_crop,
 	.set_fmt	= mx3_camera_set_fmt,
 	.try_fmt	= mx3_camera_try_fmt,

drivers/media/video/s2255drv.c

@@ -1237,6 +1237,7 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn,
 	buffer[1] = (u32) chn_rev;
 	buffer[2] = CMD_SET_MODE;
 	memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode));
+	dev->setmode_ready[chn] = 0;
 	res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
 	if (debug)
 		dump_verify_mode(dev, mode);
@@ -1245,7 +1246,6 @@ static int s2255_set_mode(struct s2255_dev *dev, unsigned long chn,
 
 	/* wait at least 3 frames before continuing */
 	if (mode->restart) {
-		dev->setmode_ready[chn] = 0;
 		wait_event_timeout(dev->wait_setmode[chn],
 				   (dev->setmode_ready[chn] != 0),
 				   msecs_to_jiffies(S2255_SETMODE_TIMEOUT));

drivers/media/video/saa5246a.c

@@ -1092,9 +1092,8 @@ static int saa5246a_probe(struct i2c_client *client,
 	/* Register it */
 	err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
 	if (err < 0) {
-		kfree(t);
 		video_device_release(t->vdev);
-		t->vdev = NULL;
+		kfree(t);
 		return err;
 	}
 	return 0;

drivers/media/video/saa5249.c

@@ -598,6 +598,7 @@ static int saa5249_probe(struct i2c_client *client,
 	/* Now create a video4linux device */
 	t->vdev = video_device_alloc();
 	if (t->vdev == NULL) {
+		kfree(t);
 		kfree(client);
 		return -ENOMEM;
 	}
@@ -617,9 +618,8 @@ static int saa5249_probe(struct i2c_client *client,
 	/* Register it */
 	err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
 	if (err < 0) {
-		kfree(t);
 		video_device_release(t->vdev);
-		t->vdev = NULL;
+		kfree(t);
 		return err;
 	}
 	return 0;