Commit 941be8a7 authored by Han Xu's avatar Han Xu Committed by Mark Brown

spi: fspi: enable fspi on imx8qxp and imx8mm

Pull in this patch from NXP's upstream repo to
enable fspi on imx8qxp and imx8mm
Signed-off-by: default avatarAdam Ford <aford173@gmail.com>
Signed-off-by: default avatarHan Xu <han.xu@nxp.com>

Link: https://lore.kernel.org/r/20200126140913.2139260-1-aford173@gmail.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent cb71d8ef
...@@ -324,6 +324,22 @@ static const struct nxp_fspi_devtype_data lx2160a_data = { ...@@ -324,6 +324,22 @@ static const struct nxp_fspi_devtype_data lx2160a_data = {
.little_endian = true, /* little-endian */ .little_endian = true, /* little-endian */
}; };
static const struct nxp_fspi_devtype_data imx8mm_data = {
.rxfifo = SZ_512, /* (64 * 64 bits) */
.txfifo = SZ_1K, /* (128 * 64 bits) */
.ahb_buf_size = SZ_2K, /* (256 * 64 bits) */
.quirks = 0,
.little_endian = true, /* little-endian */
};
static const struct nxp_fspi_devtype_data imx8qxp_data = {
.rxfifo = SZ_512, /* (64 * 64 bits) */
.txfifo = SZ_1K, /* (128 * 64 bits) */
.ahb_buf_size = SZ_2K, /* (256 * 64 bits) */
.quirks = 0,
.little_endian = true, /* little-endian */
};
struct nxp_fspi { struct nxp_fspi {
void __iomem *iobase; void __iomem *iobase;
void __iomem *ahb_addr; void __iomem *ahb_addr;
...@@ -1076,6 +1092,8 @@ static int nxp_fspi_resume(struct device *dev) ...@@ -1076,6 +1092,8 @@ static int nxp_fspi_resume(struct device *dev)
static const struct of_device_id nxp_fspi_dt_ids[] = { static const struct of_device_id nxp_fspi_dt_ids[] = {
{ .compatible = "nxp,lx2160a-fspi", .data = (void *)&lx2160a_data, }, { .compatible = "nxp,lx2160a-fspi", .data = (void *)&lx2160a_data, },
{ .compatible = "nxp,imx8mm-fspi", .data = (void *)&imx8mm_data, },
{ .compatible = "nxp,imx8qxp-fspi", .data = (void *)&imx8qxp_data, },
{ /* sentinel */ } { /* sentinel */ }
}; };
MODULE_DEVICE_TABLE(of, nxp_fspi_dt_ids); MODULE_DEVICE_TABLE(of, nxp_fspi_dt_ids);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment