Commit 94322ed8 authored by Vaibhav Jain's avatar Vaibhav Jain Committed by Michael Ellerman

cxl: Check if PSL data-cache is available before issue flush request

PSL9D doesn't have a data-cache that needs to be flushed before
resetting the card. However when cxl tries to flush data-cache on such
a card, it times-out as PSL_Control register never indicates flush
operation complete due to missing data-cache. This is usually
indicated in the kernel logs with this message:

"WARNING: cache flush timed out"

To fix this the patch checks PSL_Debug register CDC-Field(BIT:27)
which indicates the absence of a data-cache and sets a flag
'no_data_cache' in 'struct cxl_native' to indicate this. When
cxl_data_cache_flush() is called it checks the flag and if set bails
out early without requesting a data-cache flush operation to the PSL.
Signed-off-by: default avatarVaibhav Jain <vaibhav@linux.vnet.ibm.com>
Acked-by: default avatarAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: default avatarFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 02b63b42
......@@ -369,6 +369,9 @@ static const cxl_p2n_reg_t CXL_PSL_WED_An = {0x0A0};
#define CXL_PSL_TFC_An_AE (1ull << (63-30)) /* Restart PSL with address error */
#define CXL_PSL_TFC_An_R (1ull << (63-31)) /* Restart PSL transaction */
/****** CXL_PSL_DEBUG *****************************************************/
#define CXL_PSL_DEBUG_CDC (1ull << (63-27)) /* Coherent Data cache support */
/****** CXL_XSL9_IERAT_ERAT - CAIA 2 **********************************/
#define CXL_XSL9_IERAT_MLPID (1ull << (63-0)) /* Match LPID */
#define CXL_XSL9_IERAT_MPID (1ull << (63-1)) /* Match PID */
......@@ -669,6 +672,7 @@ struct cxl_native {
irq_hw_number_t err_hwirq;
unsigned int err_virq;
u64 ps_off;
bool no_data_cache; /* set if no data cache on the card */
const struct cxl_service_layer_ops *sl_ops;
};
......
......@@ -353,8 +353,17 @@ int cxl_data_cache_flush(struct cxl *adapter)
u64 reg;
unsigned long timeout = jiffies + (HZ * CXL_TIMEOUT);
pr_devel("Flushing data cache\n");
/*
* Do a datacache flush only if datacache is available.
* In case of PSL9D datacache absent hence flush operation.
* would timeout.
*/
if (adapter->native->no_data_cache) {
pr_devel("No PSL data cache. Ignoring cache flush req.\n");
return 0;
}
pr_devel("Flushing data cache\n");
reg = cxl_p1_read(adapter, CXL_PSL_Control);
reg |= CXL_PSL_Control_Fr;
cxl_p1_write(adapter, CXL_PSL_Control, reg);
......
......@@ -456,6 +456,7 @@ static int init_implementation_adapter_regs_psl9(struct cxl *adapter,
u64 chipid;
u32 phb_index;
u64 capp_unit_id;
u64 psl_debug;
int rc;
rc = cxl_calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
......@@ -510,6 +511,16 @@ static int init_implementation_adapter_regs_psl9(struct cxl *adapter,
cxl_p1_write(adapter, CXL_PSL9_DEBUG, 0xC000000000000000ULL);
}
/*
* Check if PSL has data-cache. We need to flush adapter datacache
* when as its about to be removed.
*/
psl_debug = cxl_p1_read(adapter, CXL_PSL9_DEBUG);
if (psl_debug & CXL_PSL_DEBUG_CDC) {
dev_dbg(&dev->dev, "No data-cache present\n");
adapter->native->no_data_cache = true;
}
return 0;
}
......@@ -1448,9 +1459,7 @@ int cxl_pci_reset(struct cxl *adapter)
/*
* The adapter is about to be reset, so ignore errors.
* Not supported on P9 DD1
*/
if ((cxl_is_power8()) || (!(cxl_is_power9_dd1())))
cxl_data_cache_flush(adapter);
/* pcie_warm_reset requests a fundamental pci reset which includes a
......@@ -1934,9 +1943,7 @@ static void cxl_pci_remove_adapter(struct cxl *adapter)
/*
* Flush adapter datacache as its about to be removed.
* Not supported on P9 DD1.
*/
if ((cxl_is_power8()) || (!(cxl_is_power9_dd1())))
cxl_data_cache_flush(adapter);
cxl_deconfigure_adapter(adapter);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment