davinci: Add watchdog base address flexibility

The watchdog code currently hardcodes the base address
of the timer its using.  To support new SoCs, make it
support timers at any address.  Use the soc_info structure
to do this.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

arch/arm/mach-davinci/devices.c

@@ -216,8 +216,6 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 
 static struct resource wdt_resources[] = {
 	{
-		.start	= 0x01c21c00,
-		.end	= 0x01c21fff,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -231,6 +229,11 @@ struct platform_device davinci_wdt_device = {
 
 static void davinci_init_wdt(void)
 {
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
+	wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
+
 	platform_device_register(&davinci_wdt_device);
 }
 

arch/arm/mach-davinci/dm355.c

@@ -646,6 +646,7 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.intc_irq_prios		= dm355_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm355_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 };
 
 void __init dm355_init(void)

arch/arm/mach-davinci/dm644x.c

@@ -589,6 +589,7 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.intc_irq_prios 	= dm644x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm644x_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 };
 
 void __init dm644x_init(void)

arch/arm/mach-davinci/dm646x.c

@@ -568,6 +568,7 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm646x_timer_info,
+	.wdt_base		= IO_ADDRESS(DAVINCI_WDOG_BASE),
 };
 
 void __init dm646x_init(void)

arch/arm/mach-davinci/include/mach/common.h

@@ -57,6 +57,7 @@ struct davinci_soc_info {
 	u8				*intc_irq_prios;
 	unsigned long			intc_irq_num;
 	struct davinci_timer_info	*timer_info;
+	void __iomem			*wdt_base;
 };
 
 extern struct davinci_soc_info davinci_soc_info;

arch/arm/mach-davinci/include/mach/time.h

@@ -13,6 +13,7 @@
 
 #define DAVINCI_TIMER0_BASE		(IO_PHYS + 0x21400)
 #define DAVINCI_TIMER1_BASE		(IO_PHYS + 0x21800)
+#define DAVINCI_WDOG_BASE		(IO_PHYS + 0x21C00)
 
 enum {
 	T0_BOT,

arch/arm/mach-davinci/time.c

@@ -35,8 +35,6 @@
 static struct clock_event_device clockevent_davinci;
 static unsigned int davinci_clock_tick_rate;
 
-#define DAVINCI_WDOG_BASE   (IO_PHYS + 0x21C00)
-
 /*
  * This driver configures the 2 64-bit count-up timers as 4 independent
  * 32-bit count-up timers used as follows:
@@ -343,7 +341,8 @@ struct sys_timer davinci_timer = {
 void davinci_watchdog_reset(void)
 {
 	u32 tgcr, wdtcr;
-	void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	void __iomem *base = soc_info->wdt_base;
 	struct clk *wd_clk;
 
 	wd_clk = clk_get(&davinci_wdt_device.dev, NULL);