ACPI: Interpreter update to 20020918

drivers/acpi/dispatcher/dsfield.c

 /******************************************************************************
  *
  * Module Name: dsfield - Dispatcher field routines
- *              $Revision: 66 $
+ *              $Revision: 67 $
  *
  *****************************************************************************/
 
@@ -250,7 +250,7 @@ acpi_ds_get_field_names (
 				}
 
 				ACPI_REPORT_ERROR (("Field name [%4.4s] already exists in current scope\n",
-						  &arg->named.name));
+						(char *) &arg->named.name));
 			}
 			else {
 				arg->common.node = info->field_node;
@@ -271,7 +271,7 @@ acpi_ds_get_field_names (
 
 			if (position > ACPI_UINT32_MAX) {
 				ACPI_REPORT_ERROR (("Field [%4.4s] bit offset too large (> 0xFFFFFFFF)\n",
-					&info->field_node->name));
+						(char *) &info->field_node->name));
 				return_ACPI_STATUS (AE_SUPPORT);
 			}
 
@@ -417,7 +417,7 @@ acpi_ds_init_field_objects (
 				}
 
 				ACPI_REPORT_ERROR (("Field name [%4.4s] already exists in current scope\n",
-						  &arg->named.name));
+						(char *) &arg->named.name));
 
 				/* Name already exists, just ignore this error */
 

drivers/acpi/dispatcher/dsobject.c

 /******************************************************************************
  *
  * Module Name: dsobject - Dispatcher object management routines
- *              $Revision: 106 $
+ *              $Revision: 107 $
  *
  *****************************************************************************/
 
@@ -746,8 +746,9 @@ acpi_ds_init_object_from_op (
 
 			obj_desc->reference.opcode = AML_LOCAL_OP;
 			obj_desc->reference.offset = opcode - AML_LOCAL_OP;
+
 #ifndef ACPI_NO_METHOD_EXECUTION
-			acpi_ds_method_data_get_node (AML_LOCAL_OP, obj_desc->reference.offset,
+			status = acpi_ds_method_data_get_node (AML_LOCAL_OP, obj_desc->reference.offset,
 					 walk_state, (acpi_namespace_node **) &obj_desc->reference.object);
 #endif
 			break;

drivers/acpi/dispatcher/dswload.c

 /******************************************************************************
  *
  * Module Name: dswload - Dispatcher namespace load callbacks
- *              $Revision: 71 $
+ *              $Revision: 73 $
  *
  *****************************************************************************/
 
@@ -202,6 +202,25 @@ acpi_ds_load1_begin_op (
 			/* These are acceptable types */
 			break;
 
+		case ACPI_TYPE_INTEGER:
+		case ACPI_TYPE_STRING:
+		case ACPI_TYPE_BUFFER:
+
+			/*
+			 * These types we will allow, but we will change the type.  This
+			 * enables some existing code of the form:
+			 *
+			 *  Name (DEB, 0)
+			 *  Scope (DEB) { ... }
+			 */
+
+			ACPI_REPORT_WARNING (("Invalid type (%s) for target of Scope operator [%4.4s], changing type to ANY\n",
+				acpi_ut_get_type_name (node->type), path));
+
+			node->type = ACPI_TYPE_ANY;
+			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
+			break;
+
 	   default:
 
 			/* All other types are an error */
@@ -440,6 +459,51 @@ acpi_ds_load2_begin_op (
 	}
 
 	if (ACPI_SUCCESS (status)) {
+		/*
+		 * For the scope op, we must check to make sure that the target is
+		 * one of the opcodes that actually opens a scope
+		 */
+		if (walk_state->opcode == AML_SCOPE_OP) {
+			switch (node->type) {
+			case ACPI_TYPE_ANY:         /* Scope nodes are untyped (ANY) */
+			case ACPI_TYPE_DEVICE:
+			case ACPI_TYPE_METHOD:
+			case ACPI_TYPE_POWER:
+			case ACPI_TYPE_PROCESSOR:
+			case ACPI_TYPE_THERMAL:
+
+				/* These are acceptable types */
+				break;
+
+			case ACPI_TYPE_INTEGER:
+			case ACPI_TYPE_STRING:
+			case ACPI_TYPE_BUFFER:
+
+				/*
+				 * These types we will allow, but we will change the type.  This
+				 * enables some existing code of the form:
+				 *
+				 *  Name (DEB, 0)
+				 *  Scope (DEB) { ... }
+				 */
+
+				ACPI_REPORT_WARNING (("Invalid type (%s) for target of Scope operator [%4.4s], changing type to ANY\n",
+					acpi_ut_get_type_name (node->type), buffer_ptr));
+
+				node->type = ACPI_TYPE_ANY;
+				walk_state->scope_info->common.value = ACPI_TYPE_ANY;
+				break;
+
+		   default:
+
+				/* All other types are an error */
+
+				ACPI_REPORT_ERROR (("Invalid type (%s) for target of Scope operator [%4.4s]\n",
+					acpi_ut_get_type_name (node->type), buffer_ptr));
+
+				return (AE_AML_OPERAND_TYPE);
+			}
+		}
 		if (!op) {
 			/* Create a new op */
 

drivers/acpi/executer/exconvrt.c

 /******************************************************************************
  *
  * Module Name: exconvrt - Object conversion routines
- *              $Revision: 37 $
+ *              $Revision: 38 $
  *
  *****************************************************************************/
 
@@ -230,7 +230,33 @@ acpi_ex_convert_to_buffer (
 
 
 	case ACPI_TYPE_STRING:
-		*result_desc = obj_desc;
+		/*
+		 * Create a new Buffer object
+		 */
+		ret_desc = acpi_ut_create_internal_object (ACPI_TYPE_BUFFER);
+		if (!ret_desc) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		/* Need enough space for one integer */
+
+		new_buf = ACPI_MEM_CALLOCATE (obj_desc->string.length);
+		if (!new_buf) {
+			ACPI_REPORT_ERROR
+				(("Ex_convert_to_buffer: Buffer allocation failure\n"));
+			acpi_ut_remove_reference (ret_desc);
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		ACPI_STRNCPY ((char *) new_buf, (char *) obj_desc->string.pointer, obj_desc->string.length);
+		ret_desc->buffer.flags |= AOPOBJ_DATA_VALID;
+		ret_desc->buffer.pointer = new_buf;
+		ret_desc->buffer.length = obj_desc->string.length;
+
+		/* Return the new buffer descriptor */
+
+		*result_desc = ret_desc;
+
 		break;
 
 

drivers/acpi/executer/exmisc.c

@@ -2,7 +2,7 @@
 /******************************************************************************
  *
  * Module Name: exmisc - ACPI AML (p-code) execution - specific opcodes
- *              $Revision: 108 $
+ *              $Revision: 109 $
  *
  *****************************************************************************/
 
@@ -28,7 +28,6 @@
 #include "acpi.h"
 #include "acinterp.h"
 #include "amlcode.h"
-#include "acdispat.h"
 
 
 #define _COMPONENT          ACPI_EXECUTER

drivers/acpi/executer/exoparg1.c

@@ -2,7 +2,7 @@
 /******************************************************************************
  *
  * Module Name: exoparg1 - AML execution - opcodes with 1 argument
- *              $Revision: 142 $
+ *              $Revision: 143 $
  *
  *****************************************************************************/
 
@@ -59,7 +59,6 @@
  * fully resolved operands.
 !*/
 
-
 /*******************************************************************************
  *
  * FUNCTION:    Acpi_ex_opcode_1A_0T_0R
@@ -561,74 +560,12 @@ acpi_ex_opcode_1A_0T_1R (
 
 	case AML_TYPE_OP:               /* Object_type (Source_object) */
 
-		if (ACPI_GET_OBJECT_TYPE (operand[0]) == INTERNAL_TYPE_REFERENCE) {
-			/*
-			 * Not a Name -- an indirect name pointer would have
-			 * been converted to a direct name pointer in Resolve_operands
-			 */
-			switch (operand[0]->reference.opcode) {
-			case AML_DEBUG_OP:
-
-				/* The Debug Object is of type "Debug_object" */
-
-				type = ACPI_TYPE_DEBUG_OBJECT;
-				break;
-
-
-			case AML_INDEX_OP:
-
-				/* Get the type of this reference (index into another object) */
-
-				type = operand[0]->reference.target_type;
-				if (type == ACPI_TYPE_PACKAGE) {
-					/*
-					 * The main object is a package, we want to get the type
-					 * of the individual package element that is referenced by
-					 * the index.
-					 */
-					type = ACPI_GET_OBJECT_TYPE (*(operand[0]->reference.where));
-				}
-				break;
-
-
-			case AML_LOCAL_OP:
-			case AML_ARG_OP:
-
-				type = acpi_ds_method_data_get_type (operand[0]->reference.opcode,
-						  operand[0]->reference.offset, walk_state);
-				break;
-
-
-			default:
+		/* Get the type of the base object */
 
-				ACPI_REPORT_ERROR (("Acpi_ex_opcode_1A_0T_1R/Type_op: Unknown Reference subtype %X\n",
-					operand[0]->reference.opcode));
-				status = AE_AML_INTERNAL;
+		status = acpi_ex_resolve_multiple (walk_state, operand[0], &type, NULL);
+		if (ACPI_FAILURE (status)) {
 			goto cleanup;
 		}
-		}
-		else {
-			/*
-			 * It's not a Reference, so it must be a direct name pointer.
-			 */
-			type = acpi_ns_get_type ((acpi_namespace_node *) operand[0]);
-
-			/* Convert internal types to external types */
-
-			switch (type) {
-			case INTERNAL_TYPE_REGION_FIELD:
-			case INTERNAL_TYPE_BANK_FIELD:
-			case INTERNAL_TYPE_INDEX_FIELD:
-
-				type = ACPI_TYPE_FIELD_UNIT;
-				break;
-
-			default:
-				/* No change to Type required */
-				break;
-			}
-
-		}
 
 		/* Allocate a descriptor to hold the type. */
 
@@ -644,21 +581,19 @@ acpi_ex_opcode_1A_0T_1R (
 
 	case AML_SIZE_OF_OP:            /* Size_of (Source_object) */
 
-		temp_desc = operand[0];
-		if (ACPI_GET_DESCRIPTOR_TYPE (operand[0]) == ACPI_DESC_TYPE_NAMED) {
-			temp_desc = acpi_ns_get_attached_object ((acpi_namespace_node *) operand[0]);
-		}
+		/* Get the base object */
 
-		if (!temp_desc) {
-			value = 0;
+		status = acpi_ex_resolve_multiple (walk_state, operand[0], &type, &temp_desc);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
 		}
-		else {
+
 		/*
 		 * Type is guaranteed to be a buffer, string, or package at this
 		 * point (even if the original operand was an object reference, it
 		 * will be resolved and typechecked during operand resolution.)
 		 */
-			switch (ACPI_GET_OBJECT_TYPE (temp_desc)) {
+		switch (type) {
 		case ACPI_TYPE_BUFFER:
 			value = temp_desc->buffer.length;
 			break;
@@ -673,11 +608,10 @@ acpi_ex_opcode_1A_0T_1R (
 
 		default:
 			ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Size_of, Not Buf/Str/Pkg - found type %s\n",
-					acpi_ut_get_object_type_name (temp_desc)));
+				acpi_ut_get_type_name (type)));
 			status = AE_AML_OPERAND_TYPE;
 			goto cleanup;
 		}
-		}
 
 		/*
 		 * Now that we have the size of the object, create a result

drivers/acpi/executer/exresnte.c

@@ -2,7 +2,7 @@
 /******************************************************************************
  *
  * Module Name: exresnte - AML Interpreter object resolution
- *              $Revision: 57 $
+ *              $Revision: 58 $
  *
  *****************************************************************************/
 
@@ -26,7 +26,6 @@
 
 
 #include "acpi.h"
-#include "amlcode.h"
 #include "acdispat.h"
 #include "acinterp.h"
 #include "acnamesp.h"

drivers/acpi/executer/exresolv.c

@@ -2,7 +2,7 @@
 /******************************************************************************
  *
  * Module Name: exresolv - AML Interpreter object resolution
- *              $Revision: 115 $
+ *              $Revision: 116 $
  *
  *****************************************************************************/
 
@@ -29,6 +29,7 @@
 #include "amlcode.h"
 #include "acdispat.h"
 #include "acinterp.h"
+#include "acnamesp.h"
 
 
 #define _COMPONENT          ACPI_EXECUTER
@@ -280,3 +281,169 @@ acpi_ex_resolve_object_to_value (
 }
 
 
+/*******************************************************************************
+ *
+ * FUNCTION:    Acpi_ex_resolve_multiple
+ *
+ * PARAMETERS:  Walk_state          - Current state (contains AML opcode)
+ *              Operand             - Starting point for resolution
+ *              Return_type         - Where the object type is returned
+ *              Return_desc         - Where the resolved object is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Return the base object and type.  Traverse a reference list if
+ *              necessary to get to the base object.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_resolve_multiple (
+	acpi_walk_state         *walk_state,
+	acpi_operand_object     *operand,
+	acpi_object_type        *return_type,
+	acpi_operand_object     **return_desc)
+{
+	acpi_operand_object     *obj_desc = (void *) operand;
+	acpi_namespace_node     *node;
+	acpi_object_type        type;
+
+
+	ACPI_FUNCTION_TRACE ("Ex_get_object_type");
+
+
+	/*
+	 * For reference objects created via the Ref_of or Index operators,
+	 * we need to get to the base object (as per the ACPI specification
+	 * of the Object_type and Size_of operators). This means traversing
+	 * the list of possibly many nested references.
+	 */
+	while (ACPI_GET_OBJECT_TYPE (obj_desc) == INTERNAL_TYPE_REFERENCE) {
+		switch (obj_desc->reference.opcode) {
+		case AML_REF_OF_OP:
+
+			/* Dereference the reference pointer */
+
+			node = obj_desc->reference.object;
+
+			/* All "References" point to a NS node */
+
+			if (ACPI_GET_DESCRIPTOR_TYPE (node) != ACPI_DESC_TYPE_NAMED) {
+				return_ACPI_STATUS (AE_AML_INTERNAL);
+			}
+
+			/* Get the attached object */
+
+			obj_desc = acpi_ns_get_attached_object (node);
+			if (!obj_desc) {
+				/* No object, use the NS node type */
+
+				type = acpi_ns_get_type (node);
+				goto exit;
+			}
+
+			/* Check for circular references */
+
+			if (obj_desc == operand) {
+				return_ACPI_STATUS (AE_AML_CIRCULAR_REFERENCE);
+			}
+			break;
+
+
+		case AML_INDEX_OP:
+
+			/* Get the type of this reference (index into another object) */
+
+			type = obj_desc->reference.target_type;
+			if (type != ACPI_TYPE_PACKAGE) {
+				goto exit;
+			}
+
+			/*
+			 * The main object is a package, we want to get the type
+			 * of the individual package element that is referenced by
+			 * the index.
+			 *
+			 * This could of course in turn be another reference object.
+			 */
+			obj_desc = *(obj_desc->reference.where);
+			break;
+
+
+		case AML_INT_NAMEPATH_OP:
+
+			/* Dereference the reference pointer */
+
+			node = obj_desc->reference.node;
+
+			/* All "References" point to a NS node */
+
+			if (ACPI_GET_DESCRIPTOR_TYPE (node) != ACPI_DESC_TYPE_NAMED) {
+				return_ACPI_STATUS (AE_AML_INTERNAL);
+			}
+
+			/* Get the attached object */
+
+			obj_desc = acpi_ns_get_attached_object (node);
+			if (!obj_desc) {
+				/* No object, use the NS node type */
+
+				type = acpi_ns_get_type (node);
+				goto exit;
+			}
+
+			/* Check for circular references */
+
+			if (obj_desc == operand) {
+				return_ACPI_STATUS (AE_AML_CIRCULAR_REFERENCE);
+			}
+			break;
+
+
+		case AML_DEBUG_OP:
+
+			/* The Debug Object is of type "Debug_object" */
+
+			type = ACPI_TYPE_DEBUG_OBJECT;
+			goto exit;
+
+
+		default:
+
+			ACPI_REPORT_ERROR (("Acpi_ex_resolve_multiple: Unknown Reference subtype %X\n",
+				obj_desc->reference.opcode));
+			return_ACPI_STATUS (AE_AML_INTERNAL);
+		}
+	}
+
+	/*
+	 * Now we are guaranteed to have an object that has not been created
+	 * via the Ref_of or Index operators.
+	 */
+	type = ACPI_GET_OBJECT_TYPE (obj_desc);
+
+
+exit:
+	/* Convert internal types to external types */
+
+	switch (type) {
+	case INTERNAL_TYPE_REGION_FIELD:
+	case INTERNAL_TYPE_BANK_FIELD:
+	case INTERNAL_TYPE_INDEX_FIELD:
+
+		type = ACPI_TYPE_FIELD_UNIT;
+		break;
+
+	default:
+		/* No change to Type required */
+		break;
+	}
+
+	*return_type = type;
+	if (return_desc) {
+		*return_desc = obj_desc;
+	}
+	return_ACPI_STATUS (AE_OK);
+}
+
+

drivers/acpi/executer/exresop.c

@@ -2,7 +2,7 @@
 /******************************************************************************
  *
  * Module Name: exresop - AML Interpreter operand/object resolution
- *              $Revision: 55 $
+ *              $Revision: 57 $
  *
  *****************************************************************************/
 
@@ -29,7 +29,6 @@
 #include "amlcode.h"
 #include "acparser.h"
 #include "acinterp.h"
-#include "acnamesp.h"
 
 
 #define _COMPONENT          ACPI_EXECUTER
@@ -463,11 +462,12 @@ acpi_ex_resolve_operands (
 		case ARGI_DATAOBJECT:
 			/*
 			 * ARGI_DATAOBJECT is only used by the Size_of operator.
-			 * Need a buffer, string, package, or Node reference.
+			 * Need a buffer, string, package, or Ref_of reference.
 			 *
 			 * The only reference allowed here is a direct reference to
 			 * a namespace node.
 			 */
+#if 0
 			if (ACPI_GET_OBJECT_TYPE (*stack_ptr) == INTERNAL_TYPE_REFERENCE) {
 				if (!(*stack_ptr)->reference.node) {
 					ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
@@ -497,13 +497,14 @@ acpi_ex_resolve_operands (
 				acpi_ut_remove_reference (*stack_ptr);
 				(*stack_ptr) = temp_node;
 			}
-
+#endif
 			/* Need a buffer, string, package */
 
 			switch (ACPI_GET_OBJECT_TYPE (*stack_ptr)) {
 			case ACPI_TYPE_PACKAGE:
 			case ACPI_TYPE_STRING:
 			case ACPI_TYPE_BUFFER:
+			case INTERNAL_TYPE_REFERENCE:
 
 				/* Valid operand */
 				break;

drivers/acpi/executer/exstore.c

@@ -2,7 +2,7 @@
 /******************************************************************************
  *
  * Module Name: exstore - AML Interpreter object store support
- *              $Revision: 169 $
+ *              $Revision: 171 $
  *
  *****************************************************************************/
 
@@ -103,7 +103,7 @@ acpi_ex_store (
 			return_ACPI_STATUS (AE_OK);
 		}
 
-		/*lint: -fallthrough */
+		/*lint -fallthrough */
 
 	default:
 
@@ -286,6 +286,12 @@ acpi_ex_store_object_to_index (
 		if (new_desc != obj_desc) {
 			acpi_ut_remove_reference (obj_desc);
 			*(index_desc->reference.where) = new_desc;
+
+			/* If same as the original source, add a reference */
+
+			if (new_desc == source_desc) {
+				acpi_ut_add_reference (new_desc);
+			}
 		}
 		break;
 

drivers/acpi/executer/exstoren.c

@@ -3,7 +3,7 @@
  *
  * Module Name: exstoren - AML Interpreter object store support,
  *                        Store to Node (namespace object)
- *              $Revision: 50 $
+ *              $Revision: 51 $
  *
  *****************************************************************************/
 
@@ -210,6 +210,15 @@ acpi_ex_store_object_to_object (
 		if (ACPI_FAILURE (status)) {
 			return_ACPI_STATUS (status);
 		}
+
+		if (source_desc == actual_src_desc) {
+			/*
+			 * No conversion was performed.  Return the Source_desc as the
+			 * new object.
+			 */
+			*new_desc = source_desc;
+			return_ACPI_STATUS (AE_OK);
+		}
 	}
 
 	/*

drivers/acpi/include/acconfig.h

 /******************************************************************************
  *
  * Name: acconfig.h - Global configuration constants
- *       $Revision: 110 $
+ *       $Revision: 111 $
  *
  *****************************************************************************/
 
@@ -54,7 +54,7 @@
 
 /* Version string */
 
-#define ACPI_CA_VERSION                 0x20020829
+#define ACPI_CA_VERSION                 0x20020918
 
 /* Version of ACPI supported */
 

drivers/acpi/include/acdebug.h

 /******************************************************************************
  *
  * Name: acdebug.h - ACPI/AML debugger
- *       $Revision: 63 $
+ *       $Revision: 64 $
  *
  *****************************************************************************/
 
@@ -197,6 +197,10 @@ acpi_db_decode_and_display_object (
 	NATIVE_CHAR             *target,
 	NATIVE_CHAR             *output_type);
 
+void
+acpi_db_decode_node (
+	acpi_namespace_node     *node);
+
 void
 acpi_db_display_result_object (
 	acpi_operand_object     *obj_desc,

drivers/acpi/include/acexcep.h

 /******************************************************************************
  *
  * Name: acexcep.h - Exception codes returned by the ACPI subsystem
- *       $Revision: 63 $
+ *       $Revision: 64 $
  *
  *****************************************************************************/
 
@@ -142,8 +142,9 @@
 #define AE_AML_ALIGNMENT                (acpi_status) (0x001D | AE_CODE_AML)
 #define AE_AML_NO_RESOURCE_END_TAG      (acpi_status) (0x001E | AE_CODE_AML)
 #define AE_AML_BAD_RESOURCE_VALUE       (acpi_status) (0x001F | AE_CODE_AML)
+#define AE_AML_CIRCULAR_REFERENCE       (acpi_status) (0x0020 | AE_CODE_AML)
 
-#define AE_CODE_AML_MAX                 0x001F
+#define AE_CODE_AML_MAX                 0x0020
 
 /*
  * Internal exceptions used for control
@@ -158,8 +159,9 @@
 #define AE_CTRL_TRANSFER                (acpi_status) (0x0008 | AE_CODE_CONTROL)
 #define AE_CTRL_BREAK                   (acpi_status) (0x0009 | AE_CODE_CONTROL)
 #define AE_CTRL_CONTINUE                (acpi_status) (0x000A | AE_CODE_CONTROL)
+#define AE_CTRL_SKIP                    (acpi_status) (0x000B | AE_CODE_CONTROL)
 
-#define AE_CODE_CTRL_MAX                0x000A
+#define AE_CODE_CTRL_MAX                0x000B
 
 
 #ifdef DEFINE_ACPI_GLOBALS
@@ -255,7 +257,8 @@ NATIVE_CHAR const   *acpi_gbl_exception_names_aml[] =
 	"AE_AML_NO_WHILE",
 	"AE_AML_ALIGNMENT",
 	"AE_AML_NO_RESOURCE_END_TAG",
-	"AE_AML_BAD_RESOURCE_VALUE"
+	"AE_AML_BAD_RESOURCE_VALUE",
+	"AE_AML_CIRCULAR_REFERENCE"
 };
 
 NATIVE_CHAR const   *acpi_gbl_exception_names_ctrl[] =
@@ -269,7 +272,8 @@ NATIVE_CHAR const   *acpi_gbl_exception_names_ctrl[] =
 	"AE_CTRL_END",
 	"AE_CTRL_TRANSFER",
 	"AE_CTRL_BREAK",
-	"AE_CTRL_CONTINUE"
+	"AE_CTRL_CONTINUE",
+	"AE_CTRL_SKIP"
 };
 
 #endif /* ACPI GLOBALS */

drivers/acpi/include/acinterp.h

 /******************************************************************************
  *
  * Name: acinterp.h - Interpreter subcomponent prototypes and defines
- *       $Revision: 138 $
+ *       $Revision: 139 $
  *
  *****************************************************************************/
 
@@ -194,6 +194,13 @@ acpi_ex_get_object_reference (
 	acpi_operand_object     **return_desc,
 	acpi_walk_state         *walk_state);
 
+acpi_status
+acpi_ex_resolve_multiple (
+	acpi_walk_state         *walk_state,
+	acpi_operand_object     *operand,
+	acpi_object_type        *return_type,
+	acpi_operand_object     **return_desc);
+
 acpi_status
 acpi_ex_concat_template (
 	acpi_operand_object     *obj_desc,

drivers/acpi/include/acpiosxf.h

@@ -261,6 +261,10 @@ acpi_os_writable (
 	void                    *pointer,
 	u32                     length);
 
+u32
+acpi_os_get_timer (
+	void);
+
 acpi_status
 acpi_os_signal (
 	u32                     function,
@@ -280,6 +284,10 @@ acpi_os_vprintf (
 	const NATIVE_CHAR       *format,
 	va_list                 args);
 
+void
+acpi_os_redirect_output (
+	void                    *destination);
+
 
 /*
  * Debug input
@@ -290,4 +298,16 @@ acpi_os_get_line (
 	NATIVE_CHAR             *buffer);
 
 
+/*
+ * Debug
+ */
+
+void
+acpi_os_dbg_assert(
+	void                    *failed_assertion,
+	void                    *file_name,
+	u32                     line_number,
+	NATIVE_CHAR             *message);
+
+
 #endif /* __ACPIOSXF_H__ */

drivers/acpi/include/actypes.h

 /******************************************************************************
  *
  * Name: actypes.h - Common data types for the entire ACPI subsystem
- *       $Revision: 238 $
+ *       $Revision: 239 $
  *
  *****************************************************************************/
 

drivers/acpi/include/acutils.h

 /******************************************************************************
  *
  * Name: acutils.h -- prototypes for the common (subsystem-wide) procedures
- *       $Revision: 143 $
+ *       $Revision: 144 $
  *
  *****************************************************************************/
 
@@ -138,7 +138,7 @@ acpi_ut_allocate_owner_id (
 
 #ifndef ACPI_USE_SYSTEM_CLIBRARY
 
-u32
+ACPI_SIZE
 acpi_ut_strlen (
 	const NATIVE_CHAR       *string);
 
@@ -151,15 +151,15 @@ NATIVE_CHAR *
 acpi_ut_strncpy (
 	NATIVE_CHAR             *dst_string,
 	const NATIVE_CHAR       *src_string,
-	NATIVE_UINT             count);
+	ACPI_SIZE               count);
 
 int
 acpi_ut_strncmp (
 	const NATIVE_CHAR       *string1,
 	const NATIVE_CHAR       *string2,
-	NATIVE_UINT             count);
+	ACPI_SIZE               count);
 
-u32
+int
 acpi_ut_strcmp (
 	const NATIVE_CHAR       *string1,
 	const NATIVE_CHAR       *string2);
@@ -173,7 +173,7 @@ NATIVE_CHAR *
 acpi_ut_strncat (
 	NATIVE_CHAR             *dst_string,
 	const NATIVE_CHAR       *src_string,
-	NATIVE_UINT             count);
+	ACPI_SIZE               count);
 
 u32
 acpi_ut_strtoul (
@@ -190,13 +190,13 @@ void *
 acpi_ut_memcpy (
 	void                    *dest,
 	const void              *src,
-	NATIVE_UINT             count);
+	ACPI_SIZE               count);
 
 void *
 acpi_ut_memset (
 	void                    *dest,
 	NATIVE_UINT             value,
-	NATIVE_UINT             count);
+	ACPI_SIZE               count);
 
 int
 acpi_ut_to_upper (

drivers/acpi/namespace/nsdump.c

 /******************************************************************************
  *
  * Module Name: nsdump - table dumping routines for debug
- *              $Revision: 139 $
+ *              $Revision: 140 $
  *
  *****************************************************************************/
 
@@ -116,7 +116,7 @@ acpi_ns_dump_pathname (
 
 	status = acpi_ns_handle_to_pathname (handle, &buffer);
 	if (ACPI_SUCCESS (status)) {
-		acpi_os_printf ("%s %s (Node %p)\n", msg, buffer.pointer, handle);
+		acpi_os_printf ("%s %s (Node %p)\n", msg, (char *) buffer.pointer, handle);
 		ACPI_MEM_FREE (buffer.pointer);
 	}
 
@@ -254,10 +254,10 @@ acpi_ns_dump_one_object (
 		switch (type) {
 		case ACPI_TYPE_PROCESSOR:
 
-			acpi_os_printf (" ID %hd Addr %.4X Len %.4X\n",
+			acpi_os_printf (" ID %X Len %.4X Addr %p\n",
 					 obj_desc->processor.proc_id,
-					 obj_desc->processor.address,
-					 obj_desc->processor.length);
+					 obj_desc->processor.length,
+					 (char *) obj_desc->processor.address);
 			break;
 
 
@@ -269,8 +269,8 @@ acpi_ns_dump_one_object (
 
 		case ACPI_TYPE_METHOD:
 
-			acpi_os_printf (" Args %hd Len %.4X Aml %p \n",
-					 obj_desc->method.param_count,
+			acpi_os_printf (" Args %X Len %.4X Aml %p\n",
+					 (u32) obj_desc->method.param_count,
 					 obj_desc->method.aml_length,
 					 obj_desc->method.aml_start);
 			break;

drivers/acpi/namespace/nsdumpdv.c

 /******************************************************************************
  *
  * Module Name: nsdump - table dumping routines for debug
- *              $Revision: 3 $
+ *              $Revision: 4 $
  *
  *****************************************************************************/
 
@@ -26,7 +26,6 @@
 
 #include "acpi.h"
 #include "acnamesp.h"
-#include "acparser.h"
 
 
 #define _COMPONENT          ACPI_NAMESPACE

drivers/acpi/namespace/nsload.c

 /******************************************************************************
  *
  * Module Name: nsload - namespace loading/expanding/contracting procedures
- *              $Revision: 58 $
+ *              $Revision: 59 $
  *
  *****************************************************************************/
 
@@ -26,7 +26,6 @@
 
 #include "acpi.h"
 #include "acnamesp.h"
-#include "amlcode.h"
 #include "acparser.h"
 #include "acdispat.h"
 

drivers/acpi/parser/psxface.c

 /******************************************************************************
  *
  * Module Name: psxface - Parser external interfaces
- *              $Revision: 65 $
+ *              $Revision: 66 $
  *
  *****************************************************************************/
 
@@ -28,7 +28,6 @@
 #include "acparser.h"
 #include "acdispat.h"
 #include "acinterp.h"
-#include "amlcode.h"
 #include "acnamesp.h"
 
 

drivers/acpi/resources/rsdump.c

 /*******************************************************************************
  *
  * Module Name: rsdump - Functions to display the resource structures.
- *              $Revision: 33 $
+ *              $Revision: 34 $
  *
  ******************************************************************************/
 
@@ -865,20 +865,25 @@ acpi_rs_dump_address64 (
 			 ACPI_ADDRESS_FIXED == address64_data->max_address_fixed ?
 			 "" : "not ");
 
-	acpi_os_printf ("  Granularity: %16X\n",
-			 address64_data->granularity);
+	acpi_os_printf ("  Granularity: %8.8X%8.8X\n",
+			 ACPI_HIDWORD (address64_data->granularity),
+			 ACPI_LODWORD (address64_data->granularity));
 
-	acpi_os_printf ("  Address range min: %16X\n",
-			 address64_data->min_address_range);
+	acpi_os_printf ("  Address range min: %8.8X%8.8X\n",
+			 ACPI_HIDWORD (address64_data->min_address_range),
+			 ACPI_HIDWORD (address64_data->min_address_range));
 
-	acpi_os_printf ("  Address range max: %16X\n",
-			 address64_data->max_address_range);
+	acpi_os_printf ("  Address range max: %8.8X%8.8X\n",
+			 ACPI_HIDWORD (address64_data->max_address_range),
+			 ACPI_HIDWORD (address64_data->max_address_range));
 
-	acpi_os_printf ("  Address translation offset: %16X\n",
-			 address64_data->address_translation_offset);
+	acpi_os_printf ("  Address translation offset: %8.8X%8.8X\n",
+			 ACPI_HIDWORD (address64_data->address_translation_offset),
+			 ACPI_HIDWORD (address64_data->address_translation_offset));
 
-	acpi_os_printf ("  Address Length: %16X\n",
-			 address64_data->address_length);
+	acpi_os_printf ("  Address Length: %8.8X%8.8X\n",
+			 ACPI_HIDWORD (address64_data->address_length),
+			 ACPI_HIDWORD (address64_data->address_length));
 
 	if(0xFF != address64_data->resource_source.index) {
 		acpi_os_printf ("  Resource Source Index: %X\n",

drivers/acpi/tables/tbget.c

 /******************************************************************************
  *
  * Module Name: tbget - ACPI Table get* routines
- *              $Revision: 79 $
+ *              $Revision: 80 $
  *
  *****************************************************************************/
 
@@ -129,8 +129,10 @@ acpi_tb_get_table_header (
 		status = acpi_os_map_memory (address->pointer.physical, sizeof (acpi_table_header),
 				  (void **) &header);
 		if (ACPI_FAILURE (status)) {
-			ACPI_REPORT_ERROR (("Could not map memory at %p for length %X\n",
-				address->pointer.physical, sizeof (acpi_table_header)));
+			ACPI_REPORT_ERROR (("Could not map memory at %8.8X%8.8X for length %X\n",
+				ACPI_HIDWORD (address->pointer.physical),
+				ACPI_LODWORD (address->pointer.physical),
+				sizeof (acpi_table_header)));
 			return_ACPI_STATUS (status);
 		}
 
@@ -343,8 +345,10 @@ acpi_tb_get_this_table (
 		status = acpi_os_map_memory (address->pointer.physical, (ACPI_SIZE) header->length,
 				  (void **) &full_table);
 		if (ACPI_FAILURE (status)) {
-			ACPI_REPORT_ERROR (("Could not map memory for table [%4.4s] at %p for length %X\n",
-				header->signature, address->pointer.physical, header->length));
+			ACPI_REPORT_ERROR (("Could not map memory for table [%4.4s] at %8.8X%8.8X for length %X\n",
+				header->signature,
+				ACPI_HIDWORD (address->pointer.physical),
+				ACPI_LODWORD (address->pointer.physical), header->length));
 			return (status);
 		}
 

drivers/acpi/utilities/utcopy.c

 /******************************************************************************
  *
  * Module Name: utcopy - Internal to external object translation utilities
- *              $Revision: 103 $
+ *              $Revision: 104 $
  *
  *****************************************************************************/
 
@@ -25,7 +25,6 @@
 
 
 #include "acpi.h"
-#include "acnamesp.h"
 #include "amlcode.h"
 
 

drivers/acpi/utilities/utdebug.c

 /******************************************************************************
  *
  * Module Name: utdebug - Debug print routines
- *              $Revision: 104 $
+ *              $Revision: 105 $
  *
  *****************************************************************************/
 
@@ -152,7 +152,7 @@ acpi_ut_debug_print (
 	acpi_os_printf ("%8s-%04ld ", dbg_info->module_name, line_number);
 
 	if (ACPI_LV_THREADS & acpi_dbg_level) {
-		acpi_os_printf ("[%04lX] ", thread_id, acpi_gbl_nesting_level, dbg_info->proc_name);
+		acpi_os_printf ("[%04lX] ", thread_id);
 	}
 
 	acpi_os_printf ("[%02ld] %-22.22s: ", acpi_gbl_nesting_level, dbg_info->proc_name);
@@ -516,7 +516,7 @@ acpi_ut_dump_buffer (
 	while (i < count) {
 		/* Print current offset */
 
-		acpi_os_printf ("%05X  ", i);
+		acpi_os_printf ("%05X  ", (u32) i);
 
 		/* Print 16 hex chars */
 

drivers/acpi/utilities/utglobal.c

 /******************************************************************************
  *
  * Module Name: utglobal - Global variables for the ACPI subsystem
- *              $Revision: 170 $
+ *              $Revision: 171 $
  *
  *****************************************************************************/
 
@@ -27,7 +27,6 @@
 
 #include "acpi.h"
 #include "acnamesp.h"
-#include "amlcode.h"
 
 #define _COMPONENT          ACPI_UTILITIES
 	 ACPI_MODULE_NAME    ("utglobal")

drivers/acpi/utilities/utinit.c

 /******************************************************************************
  *
  * Module Name: utinit - Common ACPI subsystem initialization
- *              $Revision: 113 $
+ *              $Revision: 114 $
  *
  *****************************************************************************/
 
@@ -56,7 +56,7 @@ acpi_ut_fadt_register_error (
 
 	ACPI_REPORT_WARNING (
 		("Invalid FADT value %s=%X at offset %X FADT=%p\n",
-		register_name, value, offset, acpi_gbl_FADT));
+		register_name, value, (u32) offset, acpi_gbl_FADT));
 }
 
 

drivers/acpi/utilities/utmisc.c

 /*******************************************************************************
  *
  * Module Name: utmisc - common utility procedures
- *              $Revision: 80 $
+ *              $Revision: 81 $
  *
  ******************************************************************************/
 
@@ -26,8 +26,6 @@
 
 #include "acpi.h"
 #include "acnamesp.h"
-#include "amlcode.h"
-#include "acinterp.h"
 
 
 #define _COMPONENT          ACPI_UTILITIES