Commit 97d86e07 authored by Dmitry Torokhov's avatar Dmitry Torokhov

Input: gpio_keys - allow separating gpio and irq in device tree

This change allows specify interrupt for buttons separately form gpio,
potentially allowing to form several "clusters" of buttons on
different interrupts.

Button defined without both gpio and irq in device tree is a hared error
instead of a warning now.
Tested-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 1d6a0136
......@@ -10,12 +10,13 @@ Optional properties:
Each button (key) is represented as a sub-node of "gpio-keys":
Subnode properties:
- gpios: OF device-tree gpio specification.
- interrupts: the interrupt line for that input.
- label: Descriptive name of the key.
- linux,code: Keycode to emit.
Required mutual exclusive subnode-properties:
- gpios: OF device-tree gpio specification.
- interrupts: the interrupt line for that input
Note that either "interrupts" or "gpios" properties can be omitted, but not
both at the same time. Specifying both properties is allowed.
Optional subnode-properties:
- linux,input-type: Specify event type this button/key generates.
......@@ -23,6 +24,9 @@ Optional subnode-properties:
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- gpio-key,wakeup: Boolean, button can wake-up the system.
- linux,can-disable: Boolean, indicates that button is connected
to dedicated (not shared) interrupt which can be disabled to
suppress events from the button.
Example nodes:
......
......@@ -470,6 +470,9 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
button->debounce_interval;
}
if (button->irq) {
bdata->irq = button->irq;
} else {
irq = gpio_to_irq(button->gpio);
if (irq < 0) {
error = irq;
......@@ -479,6 +482,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
return error;
}
bdata->irq = irq;
}
INIT_WORK(&bdata->work, gpio_keys_gpio_work_func);
setup_timer(&bdata->timer,
......@@ -618,33 +622,30 @@ gpio_keys_get_devtree_pdata(struct device *dev)
i = 0;
for_each_child_of_node(node, pp) {
int gpio = -1;
enum of_gpio_flags flags;
button = &pdata->buttons[i++];
if (!of_find_property(pp, "gpios", NULL)) {
button->irq = irq_of_parse_and_map(pp, 0);
if (button->irq == 0) {
i--;
pdata->nbuttons--;
dev_warn(dev, "Found button without gpios or irqs\n");
continue;
}
} else {
gpio = of_get_gpio_flags(pp, 0, &flags);
if (gpio < 0) {
error = gpio;
button->gpio = of_get_gpio_flags(pp, 0, &flags);
if (button->gpio < 0) {
error = button->gpio;
if (error != -ENOENT) {
if (error != -EPROBE_DEFER)
dev_err(dev,
"Failed to get gpio flags, error: %d\n",
error);
return ERR_PTR(error);
}
} else {
button->active_low = flags & OF_GPIO_ACTIVE_LOW;
}
button->gpio = gpio;
button->active_low = flags & OF_GPIO_ACTIVE_LOW;
button->irq = irq_of_parse_and_map(pp, 0);
if (!gpio_is_valid(button->gpio) && !button->irq) {
dev_err(dev, "Found button without gpios or irqs\n");
return ERR_PTR(-EINVAL);
}
if (of_property_read_u32(pp, "linux,code", &button->code)) {
dev_err(dev, "Button without keycode: 0x%x\n",
......@@ -659,6 +660,8 @@ gpio_keys_get_devtree_pdata(struct device *dev)
button->wakeup = !!of_get_property(pp, "gpio-key,wakeup", NULL);
button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL);
if (of_property_read_u32(pp, "debounce-interval",
&button->debounce_interval))
button->debounce_interval = 5;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment